| Mon, 16 Feb 2015 09:00:08 +0100 |
Tom Gottfried |
Morphological width imported and stored with heights is redundant to table morphologic_width.
|
| Mon, 16 Feb 2015 08:39:06 +0100 |
Tom Gottfried |
bed height differences datacage: only supply differences where subtrahend is older than minuend or year is unknown.
|
| Mon, 16 Feb 2015 15:31:17 +0100 |
Andre Heinecke |
(issue1754) Add km filtering for winfo anf fixanal results in difference calculations
|
| Mon, 16 Feb 2015 15:30:22 +0100 |
Andre Heinecke |
Actually configure a bedheight cache.
|
| Mon, 16 Feb 2015 15:28:51 +0100 |
Andre Heinecke |
(issue1754) Fix wst static cache name.
|
| Mon, 16 Feb 2015 15:28:22 +0100 |
Andre Heinecke |
(issue1754) Extend WKms interface for KM filtering
|
| Mon, 16 Feb 2015 15:27:39 +0100 |
Andre Heinecke |
(issue1754) Gracefully handle empty differenc results (e.g from km 0,001 to 0,002)
|
| Mon, 16 Feb 2015 12:55:38 +0100 |
Andre Heinecke |
(issue1754) Add distantce handling to WINFO differences state
|
| Mon, 16 Feb 2015 11:30:27 +0100 |
Andre Heinecke |
Warn for not implemented difference handling of minfo artifacts.
|
| Fri, 13 Feb 2015 16:36:52 +0100 |
Andre Heinecke |
(issue1750) It is an error if there are more then two stations at the same range.
|
| Fri, 13 Feb 2015 16:17:46 +0100 |
Andre Heinecke |
(Issue1754) Make BedDifference calculation range dependent.
|
| Fri, 13 Feb 2015 14:59:16 +0100 |
Andre Heinecke |
(issue1750) Take Static SQ Relations based on a range and merge them together
|
| Fri, 13 Feb 2015 13:44:52 +0100 |
Andre Heinecke |
(issue1753) Remove "measured" from CSV header
|
| Fri, 13 Feb 2015 12:35:18 +0100 |
Andre Heinecke |
(issue1753) Add measurements to CSV export
|
| Fri, 13 Feb 2015 12:34:38 +0100 |
Andre Heinecke |
(issue1753) Add SQ Measurement dates as text annotations to points
|
| Fri, 13 Feb 2015 12:34:06 +0100 |
Andre Heinecke |
(issue1753) Carry measurement date through SQ values
|
| Fri, 13 Feb 2015 12:31:59 +0100 |
Andre Heinecke |
(issue1753) Add label theme for SQMeasurements
|
| Fri, 13 Feb 2015 11:10:19 +0100 |
Andre Heinecke |
Log the server startup to stdout
|
| Thu, 12 Feb 2015 17:29:33 +0100 |
Andre Heinecke |
(issue1599) Add manualpoints theme for MSH
|
| Thu, 12 Feb 2015 12:18:47 +0100 |
Andre Heinecke |
(issue1068) Add different theme for SQOutlier curves and increase SQCurve linesize to 2
|
| Thu, 12 Feb 2015 11:40:08 +0100 |
Andre Heinecke |
(issue1786) Enable manualline facets for cross section charts
|
| Thu, 12 Feb 2015 11:17:46 +0100 |
Andre Heinecke |
(issue869) Remove horizontal lines in parameters
|
| Wed, 11 Feb 2015 18:00:48 +0100 |
Andre Heinecke |
(issue1051) Use a list of single years in SedimentLoadYear mode
|
| Wed, 11 Feb 2015 12:41:51 +0100 |
Andre Heinecke |
(issue1051) Add input support for epochs
|
| Wed, 18 Feb 2015 17:17:20 +0100 |
Andre Heinecke |
(issue1788) Do not divide area by two.
|
| Wed, 18 Feb 2015 16:57:58 +0100 |
Tom Gottfried |
(issue1717) Use unified description for y-field in editor for manual points in historical discharge time-diagrams.
|
| Tue, 17 Feb 2015 16:17:31 +0100 |
Andre Heinecke |
(issue1795) Handle modules configuration for any module
|
| Tue, 17 Feb 2015 12:36:13 +0100 |
Andre Heinecke |
(issue1794) Safeguard against layers without extent.
|
| Fri, 30 Jan 2015 15:21:35 +0100 |
Andre Heinecke |
Update uuid of "Rhein"
|
| Fri, 16 Jan 2015 18:35:35 +0100 |
Andre Heinecke |
(issue1777) Move logging code for existing tickets to the correct location
|
| Mon, 12 Jan 2015 17:57:20 +0100 |
Tom Gottfried |
Remove useless i18n that cannot be called from server anyhow.
|
| Fri, 19 Dec 2014 20:50:29 +0100 |
Tom Gottfried |
Release script: build binaries for publication when tagging and slightly mavenize the whole process.
|
| Fri, 19 Dec 2014 19:32:05 +0100 |
Tom Gottfried |
Useful default for path to DEMs.
|
| Fri, 19 Dec 2014 16:35:06 +0100 |
Tom Gottfried |
It's useful to have an uncompressed tar to which more files can be appended.
|
| Fri, 19 Dec 2014 16:34:12 +0100 |
Tom Gottfried |
We don't need the base directory in the assembly.
|
| Fri, 19 Dec 2014 15:24:43 +0100 |
Tom Gottfried |
Let overview be the first tab in SQ relation output.
|
| Thu, 18 Dec 2014 16:12:01 +0100 |
Tom Gottfried |
On error log error.
|
| Thu, 18 Dec 2014 15:45:17 +0100 |
Tom Gottfried |
Set useful default for mapserver-URLs.
|
| Thu, 18 Dec 2014 11:20:51 +0100 |
Tom Gottfried |
Exclude transitive dependency because of conflicting version which breaks charting.
|
| Wed, 17 Dec 2014 18:02:27 +0100 |
Tom Gottfried |
Update Oracle-POM in backend and add pom-oracle.xml with respective dependency to artifacts.
|
| Wed, 17 Dec 2014 16:16:02 +0100 |
Tom Gottfried |
Configure standalone binary assembly.
|
| Wed, 17 Dec 2014 15:56:41 +0100 |
Tom Gottfried |
Use Maven instead of potentially outdated JARs for creation of h2-databases. TODO: adapt release script.
|
| Wed, 17 Dec 2014 10:50:35 +0100 |
Tom Gottfried |
OpenLayers download moved to github.
|
| Tue, 16 Dec 2014 17:54:55 +0100 |
Tom Gottfried |
Put artifact server run-script in it's final place.
|
| Tue, 16 Dec 2014 17:47:21 +0100 |
Tom Gottfried |
ETL: Upgrade PostgreSQL dependency to same version as river-backend.
|
| Tue, 16 Dec 2014 15:58:33 +0100 |
Andre Heinecke |
(issue1782) Invert artifact range if necessary in officiallinefinder
|
| Tue, 16 Dec 2014 15:40:00 +0100 |
Andre Heinecke |
(issue1782) Invert KM filter if from is larger then to
|
| Tue, 16 Dec 2014 15:29:44 +0100 |
Andre Heinecke |
(issue1782) Select index based on km for step generation
|
| Tue, 16 Dec 2014 14:27:13 +0100 |
Andre Heinecke |
(issue1777) Evaluate CLIENT_CONF environment variable
|
| Tue, 16 Dec 2014 14:16:10 +0100 |
Andre Heinecke |
(issue1777) Add options to change login redirect and disable login
|
| Tue, 16 Dec 2014 12:48:25 +0100 |
Andre Heinecke |
(issue1777) Log saml logins also as info without username.
|
| Tue, 16 Dec 2014 12:47:46 +0100 |
Andre Heinecke |
(issue1777) Hide logout button if it is configured.
|
| Tue, 16 Dec 2014 13:29:38 +0100 |
Tom Gottfried |
Whitespace-cleanup in XML-files.
|
| Mon, 15 Dec 2014 19:30:10 +0100 |
Tom Gottfried |
Release script: remove installation specific defaults and give the possibility to overwrite any config-file in WEB-INF.
|
| Mon, 15 Dec 2014 19:27:04 +0100 |
Tom Gottfried |
The used patch build of SmartGWT is not available anymore.
|
| Mon, 15 Dec 2014 19:25:02 +0100 |
Tom Gottfried |
Release script: use trusted connections to repositories.
|
| Mon, 15 Dec 2014 17:22:16 +0100 |
Tom Gottfried |
Remove obsolete Wiki-URL config in client.
|
| Mon, 15 Dec 2014 16:40:21 +0100 |
Tom Gottfried |
The base-URL comes from elsewhere. Other *.properties-files know that already.
|
| Fri, 12 Dec 2014 11:11:26 +0100 |
Tom Gottfried |
Do not filter tables without end date in recommendations for historical discharge tables.
|
| Thu, 04 Dec 2014 18:15:05 +0100 |
Tom Gottfried |
Artifact-server config in release script: remove installation specific defaults and give the possibility to overwrite any config-file.
|
| Thu, 04 Dec 2014 13:00:23 +0100 |
Tom Gottfried |
Do not give Oracle-JARs with hardcoded personal path in release script.
|
| Thu, 04 Dec 2014 11:38:18 +0100 |
Tom Gottfried |
Correct header for release script.
|
| Tue, 02 Dec 2014 17:58:45 +0100 |
Tom Gottfried |
Added tag 3.1.9 for changeset 7bc675e4e6e0
|
| Tue, 02 Dec 2014 17:54:15 +0100 |
Sascha L. Teichmann |
Remove trailing whitespace.
3.1.9
|
| Tue, 02 Dec 2014 17:51:56 +0100 |
Sascha L. Teichmann |
Removed obsolete imports.
|
| Tue, 02 Dec 2014 15:25:34 +0100 |
Tom Gottfried |
Time series chart: bounds cannot allways be assumed to be given.
|
| Tue, 02 Dec 2014 15:23:01 +0100 |
Tom Gottfried |
Do not flood log with details about all facets.
|
| Tue, 02 Dec 2014 12:59:52 +0100 |
Tom Gottfried |
Datacage config: Oracle has no boolean data type and thus can not handle such CASE-statement in WHERE-clause.
|
| Tue, 02 Dec 2014 12:03:50 +0100 |
Tom Gottfried |
Remove non-existant artifact from config.
|
| Fri, 28 Nov 2014 16:34:40 +0100 |
Tom Gottfried |
Make maxWait configurable and wait for 30 seconds
|
| Fri, 28 Nov 2014 10:21:40 +0100 |
Tom Gottfried |
maxWait should be set independendly of validationQuery.
|
| Thu, 27 Nov 2014 20:25:31 +0100 |
Tom Gottfried |
Use validation queries for release.
|
| Thu, 27 Nov 2014 20:15:38 +0100 |
Tom Gottfried |
Use explicit query to avoid hibernate connection leak.
|
| Thu, 27 Nov 2014 19:55:55 +0100 |
Tom Gottfried |
Connection pool: do not wait forever for new connections and be more verbose.
|
| Thu, 27 Nov 2014 19:14:05 +0100 |
Tom Gottfried |
Upgrade hibernate.
|
| Thu, 27 Nov 2014 19:10:45 +0100 |
Tom Gottfried |
Add missing annotation.
|
| Thu, 27 Nov 2014 17:46:37 +0100 |
Tom Gottfried |
Use RiverAccess instead of RiverUtils.
|
| Thu, 27 Nov 2014 17:09:19 +0100 |
Tom Gottfried |
We depend on PostreSQL >= 9.1 at least since rev 598e4bec920b (because of CTE).
|
| Wed, 26 Nov 2014 14:56:20 +0100 |
Tom Gottfried |
Use portable validation queries.
|
| Wed, 26 Nov 2014 14:40:18 +0100 |
Tom Gottfried |
The used patch build of SmartGWT is not available anymore.
|
| Tue, 25 Nov 2014 14:06:05 +0100 |
Andre Heinecke |
Add validation-query to example configuration.
|
| Thu, 20 Nov 2014 11:27:10 +0100 |
Tom Gottfried |
Datacage: order WSTs according to column numbers in import files.
|
| Tue, 18 Nov 2014 15:24:40 +0100 |
Andre Heinecke |
(issue1772) Use 0.001km tolarance instead of 0.1 to find matching km.
|
| Thu, 13 Nov 2014 13:28:45 +0100 |
Tom Gottfried |
Remove obsolete lines from drop script.
|
| Wed, 12 Nov 2014 13:31:53 +0100 |
Sascha L. Teichmann |
Added a validation SQL query to database backends.
|
| Thu, 06 Nov 2014 15:16:37 +0100 |
Tom Gottfried |
Remove docs for specific system.
|
| Wed, 05 Nov 2014 19:07:49 +0100 |
Tom Gottfried |
Cross section navigation: behave equally, regardless of whether an input value is below or above the range of possible values.
|
| Wed, 05 Nov 2014 15:44:04 +0100 |
Andre Heinecke |
(issue1767) Fix lookup of closest value.
|
| Wed, 05 Nov 2014 13:04:53 +0100 |
Tom Gottfried |
Gauge locations are obsolete since a long time.
|
| Tue, 04 Nov 2014 17:09:04 +0100 |
Andre Heinecke |
(issue1767) Fix closet next value selection.
|
| Tue, 04 Nov 2014 15:32:56 +0100 |
Tom Gottfried |
Add possibility to pack install-script in release tarball.
|
| Thu, 30 Oct 2014 17:49:43 +0100 |
Tom Gottfried |
Remove no more existant processor from config.
|
| Thu, 30 Oct 2014 15:03:55 +0100 |
Tom Gottfried |
Remove obsolete historical discharge curve implementations.
|
| Thu, 30 Oct 2014 14:20:28 +0100 |
Tom Gottfried |
Load discharge curves via recommendations in historical discharge calculation. ToDo: Remove the other logic to load them.
|
| Thu, 30 Oct 2014 14:17:49 +0100 |
Tom Gottfried |
Accept number as argument in dc:date-format().
|
| Thu, 30 Oct 2014 14:10:41 +0100 |
Tom Gottfried |
Unify wording and spelling for axis fixation in chart properties editor.
|
| Thu, 30 Oct 2014 11:03:19 +0100 |
Tom Gottfried |
Remove obsolete setting of start date.
|
| Thu, 30 Oct 2014 10:33:16 +0100 |
Andre Heinecke |
(issue1764) Use datepicker with text field
|
| Wed, 29 Oct 2014 19:52:06 +0100 |
Andre Heinecke |
Improve error handling.
|
| Wed, 29 Oct 2014 19:51:39 +0100 |
Andre Heinecke |
(issue1764) Set upper-time and lower-time for time series axes
|
| Wed, 29 Oct 2014 19:49:18 +0100 |
Andre Heinecke |
(issue1764) Handle date ranges in chart properties editor
|
| Wed, 29 Oct 2014 16:02:37 +0100 |
Tom Gottfried |
Recognize the 'no-data value' of fromkm and tokm in datacage statement for discharge curves.
|
| Tue, 28 Oct 2014 18:52:35 +0100 |
Andre Heinecke |
(issue1732) When duplication wsplgen artificats fix shapefile layers
|
| Tue, 28 Oct 2014 16:10:42 +0100 |
Andre Heinecke |
(issue1733) Use rangeaccess to access range information in location select
|
| Tue, 28 Oct 2014 11:31:33 +0100 |
Tom Gottfried |
The used patch build of SmartGWT is not available anymore. The newer was used for the 3.1.8 release already.
|
| Mon, 27 Oct 2014 17:00:40 +0100 |
Andre Heinecke |
(issue1733) Fix locationdistancepanel
|
| Mon, 27 Oct 2014 12:52:00 +0100 |
Andre Heinecke |
(issue1733) Fix switch between location and distance
|
| Mon, 27 Oct 2014 12:38:22 +0100 |
Andre Heinecke |
(issue1733) Remove weird and broken code (fixes tab selection)
|
| Mon, 27 Oct 2014 12:32:04 +0100 |
Andre Heinecke |
(issue1733) Clearly set location distance defaults
|
| Fri, 24 Oct 2014 16:31:22 +0200 |
Andre Heinecke |
(issue1769) Adapt release script for new print url.
|
| Fri, 24 Oct 2014 11:54:30 +0200 |
Tom Gottfried |
In case to equals from, and only in this case, there should be only one class. Then we have to set an arbitrary value > 0 for step because the user is allowed to give step=0.
|
| Wed, 22 Oct 2014 17:33:43 +0200 |
Andre Heinecke |
(issue1762) Use getValue to obtain dateRange values
|
