Mercurial > dive4elements > river

log

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
less more | rev 8554: (0) -3000 -1000 -240 +240 +1000 tip
age author description
Mon, 16 Feb 2015 09:00:08 +0100 Tom Gottfried Morphological width imported and stored with heights is redundant to table morphologic_width.
Mon, 16 Feb 2015 08:39:06 +0100 Tom Gottfried bed height differences datacage: only supply differences where subtrahend is older than minuend or year is unknown.
Mon, 16 Feb 2015 15:31:17 +0100 Andre Heinecke (issue1754) Add km filtering for winfo anf fixanal results in difference calculations
Mon, 16 Feb 2015 15:30:22 +0100 Andre Heinecke Actually configure a bedheight cache.
Mon, 16 Feb 2015 15:28:51 +0100 Andre Heinecke (issue1754) Fix wst static cache name.
Mon, 16 Feb 2015 15:28:22 +0100 Andre Heinecke (issue1754) Extend WKms interface for KM filtering
Mon, 16 Feb 2015 15:27:39 +0100 Andre Heinecke (issue1754) Gracefully handle empty differenc results (e.g from km 0,001 to 0,002)
Mon, 16 Feb 2015 12:55:38 +0100 Andre Heinecke (issue1754) Add distantce handling to WINFO differences state
Mon, 16 Feb 2015 11:30:27 +0100 Andre Heinecke Warn for not implemented difference handling of minfo artifacts.
Fri, 13 Feb 2015 16:36:52 +0100 Andre Heinecke (issue1750) It is an error if there are more then two stations at the same range.
Fri, 13 Feb 2015 16:17:46 +0100 Andre Heinecke (Issue1754) Make BedDifference calculation range dependent.
Fri, 13 Feb 2015 14:59:16 +0100 Andre Heinecke (issue1750) Take Static SQ Relations based on a range and merge them together
Fri, 13 Feb 2015 13:44:52 +0100 Andre Heinecke (issue1753) Remove "measured" from CSV header
Fri, 13 Feb 2015 12:35:18 +0100 Andre Heinecke (issue1753) Add measurements to CSV export
Fri, 13 Feb 2015 12:34:38 +0100 Andre Heinecke (issue1753) Add SQ Measurement dates as text annotations to points
Fri, 13 Feb 2015 12:34:06 +0100 Andre Heinecke (issue1753) Carry measurement date through SQ values
Fri, 13 Feb 2015 12:31:59 +0100 Andre Heinecke (issue1753) Add label theme for SQMeasurements
Fri, 13 Feb 2015 11:10:19 +0100 Andre Heinecke Log the server startup to stdout
Thu, 12 Feb 2015 17:29:33 +0100 Andre Heinecke (issue1599) Add manualpoints theme for MSH
Thu, 12 Feb 2015 12:18:47 +0100 Andre Heinecke (issue1068) Add different theme for SQOutlier curves and increase SQCurve linesize to 2
Thu, 12 Feb 2015 11:40:08 +0100 Andre Heinecke (issue1786) Enable manualline facets for cross section charts
Thu, 12 Feb 2015 11:17:46 +0100 Andre Heinecke (issue869) Remove horizontal lines in parameters
Wed, 11 Feb 2015 18:00:48 +0100 Andre Heinecke (issue1051) Use a list of single years in SedimentLoadYear mode
Wed, 11 Feb 2015 12:41:51 +0100 Andre Heinecke (issue1051) Add input support for epochs
Wed, 18 Feb 2015 17:17:20 +0100 Andre Heinecke (issue1788) Do not divide area by two.
Wed, 18 Feb 2015 16:57:58 +0100 Tom Gottfried (issue1717) Use unified description for y-field in editor for manual points in historical discharge time-diagrams.
Tue, 17 Feb 2015 16:17:31 +0100 Andre Heinecke (issue1795) Handle modules configuration for any module
Tue, 17 Feb 2015 12:36:13 +0100 Andre Heinecke (issue1794) Safeguard against layers without extent.
Fri, 30 Jan 2015 15:21:35 +0100 Andre Heinecke Update uuid of "Rhein"
Fri, 16 Jan 2015 18:35:35 +0100 Andre Heinecke (issue1777) Move logging code for existing tickets to the correct location
Mon, 12 Jan 2015 17:57:20 +0100 Tom Gottfried Remove useless i18n that cannot be called from server anyhow.
Fri, 19 Dec 2014 20:50:29 +0100 Tom Gottfried Release script: build binaries for publication when tagging and slightly mavenize the whole process.
Fri, 19 Dec 2014 19:32:05 +0100 Tom Gottfried Useful default for path to DEMs.
Fri, 19 Dec 2014 16:35:06 +0100 Tom Gottfried It's useful to have an uncompressed tar to which more files can be appended.
Fri, 19 Dec 2014 16:34:12 +0100 Tom Gottfried We don't need the base directory in the assembly.
Fri, 19 Dec 2014 15:24:43 +0100 Tom Gottfried Let overview be the first tab in SQ relation output.
Thu, 18 Dec 2014 16:12:01 +0100 Tom Gottfried On error log error.
Thu, 18 Dec 2014 15:45:17 +0100 Tom Gottfried Set useful default for mapserver-URLs.
Thu, 18 Dec 2014 11:20:51 +0100 Tom Gottfried Exclude transitive dependency because of conflicting version which breaks charting.
Wed, 17 Dec 2014 18:02:27 +0100 Tom Gottfried Update Oracle-POM in backend and add pom-oracle.xml with respective dependency to artifacts.
Wed, 17 Dec 2014 16:16:02 +0100 Tom Gottfried Configure standalone binary assembly.
Wed, 17 Dec 2014 15:56:41 +0100 Tom Gottfried Use Maven instead of potentially outdated JARs for creation of h2-databases. TODO: adapt release script.
Wed, 17 Dec 2014 10:50:35 +0100 Tom Gottfried OpenLayers download moved to github.
Tue, 16 Dec 2014 17:54:55 +0100 Tom Gottfried Put artifact server run-script in it's final place.
Tue, 16 Dec 2014 17:47:21 +0100 Tom Gottfried ETL: Upgrade PostgreSQL dependency to same version as river-backend.
Tue, 16 Dec 2014 15:58:33 +0100 Andre Heinecke (issue1782) Invert artifact range if necessary in officiallinefinder
Tue, 16 Dec 2014 15:40:00 +0100 Andre Heinecke (issue1782) Invert KM filter if from is larger then to
Tue, 16 Dec 2014 15:29:44 +0100 Andre Heinecke (issue1782) Select index based on km for step generation
Tue, 16 Dec 2014 14:27:13 +0100 Andre Heinecke (issue1777) Evaluate CLIENT_CONF environment variable
Tue, 16 Dec 2014 14:16:10 +0100 Andre Heinecke (issue1777) Add options to change login redirect and disable login
Tue, 16 Dec 2014 12:48:25 +0100 Andre Heinecke (issue1777) Log saml logins also as info without username.
Tue, 16 Dec 2014 12:47:46 +0100 Andre Heinecke (issue1777) Hide logout button if it is configured.
Tue, 16 Dec 2014 13:29:38 +0100 Tom Gottfried Whitespace-cleanup in XML-files.
Mon, 15 Dec 2014 19:30:10 +0100 Tom Gottfried Release script: remove installation specific defaults and give the possibility to overwrite any config-file in WEB-INF.
Mon, 15 Dec 2014 19:27:04 +0100 Tom Gottfried The used patch build of SmartGWT is not available anymore.
Mon, 15 Dec 2014 19:25:02 +0100 Tom Gottfried Release script: use trusted connections to repositories.
Mon, 15 Dec 2014 17:22:16 +0100 Tom Gottfried Remove obsolete Wiki-URL config in client.
Mon, 15 Dec 2014 16:40:21 +0100 Tom Gottfried The base-URL comes from elsewhere. Other *.properties-files know that already.
Fri, 12 Dec 2014 11:11:26 +0100 Tom Gottfried Do not filter tables without end date in recommendations for historical discharge tables.
Thu, 04 Dec 2014 18:15:05 +0100 Tom Gottfried Artifact-server config in release script: remove installation specific defaults and give the possibility to overwrite any config-file.
Thu, 04 Dec 2014 13:00:23 +0100 Tom Gottfried Do not give Oracle-JARs with hardcoded personal path in release script.
Thu, 04 Dec 2014 11:38:18 +0100 Tom Gottfried Correct header for release script.
Tue, 02 Dec 2014 17:58:45 +0100 Tom Gottfried Added tag 3.1.9 for changeset 7bc675e4e6e0
Tue, 02 Dec 2014 17:54:15 +0100 Sascha L. Teichmann Remove trailing whitespace. 3.1.9
Tue, 02 Dec 2014 17:51:56 +0100 Sascha L. Teichmann Removed obsolete imports.
Tue, 02 Dec 2014 15:25:34 +0100 Tom Gottfried Time series chart: bounds cannot allways be assumed to be given.
Tue, 02 Dec 2014 15:23:01 +0100 Tom Gottfried Do not flood log with details about all facets.
Tue, 02 Dec 2014 12:59:52 +0100 Tom Gottfried Datacage config: Oracle has no boolean data type and thus can not handle such CASE-statement in WHERE-clause.
Tue, 02 Dec 2014 12:03:50 +0100 Tom Gottfried Remove non-existant artifact from config.
Fri, 28 Nov 2014 16:34:40 +0100 Tom Gottfried Make maxWait configurable and wait for 30 seconds
Fri, 28 Nov 2014 10:21:40 +0100 Tom Gottfried maxWait should be set independendly of validationQuery.
Thu, 27 Nov 2014 20:25:31 +0100 Tom Gottfried Use validation queries for release.
Thu, 27 Nov 2014 20:15:38 +0100 Tom Gottfried Use explicit query to avoid hibernate connection leak.
Thu, 27 Nov 2014 19:55:55 +0100 Tom Gottfried Connection pool: do not wait forever for new connections and be more verbose.
Thu, 27 Nov 2014 19:14:05 +0100 Tom Gottfried Upgrade hibernate.
Thu, 27 Nov 2014 19:10:45 +0100 Tom Gottfried Add missing annotation.
Thu, 27 Nov 2014 17:46:37 +0100 Tom Gottfried Use RiverAccess instead of RiverUtils.
Thu, 27 Nov 2014 17:09:19 +0100 Tom Gottfried We depend on PostreSQL >= 9.1 at least since rev 598e4bec920b (because of CTE).
Wed, 26 Nov 2014 14:56:20 +0100 Tom Gottfried Use portable validation queries.
Wed, 26 Nov 2014 14:40:18 +0100 Tom Gottfried The used patch build of SmartGWT is not available anymore.
Tue, 25 Nov 2014 14:06:05 +0100 Andre Heinecke Add validation-query to example configuration.
Thu, 20 Nov 2014 11:27:10 +0100 Tom Gottfried Datacage: order WSTs according to column numbers in import files.
Tue, 18 Nov 2014 15:24:40 +0100 Andre Heinecke (issue1772) Use 0.001km tolarance instead of 0.1 to find matching km.
Thu, 13 Nov 2014 13:28:45 +0100 Tom Gottfried Remove obsolete lines from drop script.
Wed, 12 Nov 2014 13:31:53 +0100 Sascha L. Teichmann Added a validation SQL query to database backends.
Thu, 06 Nov 2014 15:16:37 +0100 Tom Gottfried Remove docs for specific system.
Wed, 05 Nov 2014 19:07:49 +0100 Tom Gottfried Cross section navigation: behave equally, regardless of whether an input value is below or above the range of possible values.
Wed, 05 Nov 2014 15:44:04 +0100 Andre Heinecke (issue1767) Fix lookup of closest value.
Wed, 05 Nov 2014 13:04:53 +0100 Tom Gottfried Gauge locations are obsolete since a long time.
Tue, 04 Nov 2014 17:09:04 +0100 Andre Heinecke (issue1767) Fix closet next value selection.
Tue, 04 Nov 2014 15:32:56 +0100 Tom Gottfried Add possibility to pack install-script in release tarball.
Thu, 30 Oct 2014 17:49:43 +0100 Tom Gottfried Remove no more existant processor from config.
Thu, 30 Oct 2014 15:03:55 +0100 Tom Gottfried Remove obsolete historical discharge curve implementations.
Thu, 30 Oct 2014 14:20:28 +0100 Tom Gottfried Load discharge curves via recommendations in historical discharge calculation. ToDo: Remove the other logic to load them.
Thu, 30 Oct 2014 14:17:49 +0100 Tom Gottfried Accept number as argument in dc:date-format().
Thu, 30 Oct 2014 14:10:41 +0100 Tom Gottfried Unify wording and spelling for axis fixation in chart properties editor.
Thu, 30 Oct 2014 11:03:19 +0100 Tom Gottfried Remove obsolete setting of start date.
Thu, 30 Oct 2014 10:33:16 +0100 Andre Heinecke (issue1764) Use datepicker with text field
Wed, 29 Oct 2014 19:52:06 +0100 Andre Heinecke Improve error handling.
Wed, 29 Oct 2014 19:51:39 +0100 Andre Heinecke (issue1764) Set upper-time and lower-time for time series axes
Wed, 29 Oct 2014 19:49:18 +0100 Andre Heinecke (issue1764) Handle date ranges in chart properties editor
Wed, 29 Oct 2014 16:02:37 +0100 Tom Gottfried Recognize the 'no-data value' of fromkm and tokm in datacage statement for discharge curves.
Tue, 28 Oct 2014 18:52:35 +0100 Andre Heinecke (issue1732) When duplication wsplgen artificats fix shapefile layers
Tue, 28 Oct 2014 16:10:42 +0100 Andre Heinecke (issue1733) Use rangeaccess to access range information in location select
Tue, 28 Oct 2014 11:31:33 +0100 Tom Gottfried The used patch build of SmartGWT is not available anymore. The newer was used for the 3.1.8 release already.
Mon, 27 Oct 2014 17:00:40 +0100 Andre Heinecke (issue1733) Fix locationdistancepanel
Mon, 27 Oct 2014 12:52:00 +0100 Andre Heinecke (issue1733) Fix switch between location and distance
Mon, 27 Oct 2014 12:38:22 +0100 Andre Heinecke (issue1733) Remove weird and broken code (fixes tab selection)
Mon, 27 Oct 2014 12:32:04 +0100 Andre Heinecke (issue1733) Clearly set location distance defaults
Fri, 24 Oct 2014 16:31:22 +0200 Andre Heinecke (issue1769) Adapt release script for new print url.
Fri, 24 Oct 2014 11:54:30 +0200 Tom Gottfried In case to equals from, and only in this case, there should be only one class. Then we have to set an arbitrary value > 0 for step because the user is allowed to give step=0.
Wed, 22 Oct 2014 17:33:43 +0200 Andre Heinecke (issue1762) Use getValue to obtain dateRange values
Tue, 21 Oct 2014 12:14:39 +0200 Tom Gottfried Do not transform Q values from cm to m.
Mon, 20 Oct 2014 18:26:15 +0200 Tom Gottfried Added tag 3.1.8 for changeset 7cb55659646d
Mon, 20 Oct 2014 18:22:07 +0200 Sascha L. Teichmann Removed obsolete imports. 3.1.8
Mon, 20 Oct 2014 18:15:44 +0200 Tom Gottfried Avoid encoding problem with NaN in bed difference export.
Mon, 20 Oct 2014 16:13:26 +0200 Tom Gottfried Adapt PDF-export to new columns in bed differences result.
Mon, 20 Oct 2014 14:22:51 +0200 Tom Gottfried Mention gauge name in theme name for historical discharge curves.
Mon, 20 Oct 2014 13:52:15 +0200 Tom Gottfried More cleanup in discharge data processing.
Mon, 20 Oct 2014 13:48:51 +0200 Tom Gottfried Unify descriptions of model discharge curve at gauge.
Mon, 20 Oct 2014 12:23:11 +0200 Tom Gottfried For fixation analysis, allow loading discharge curves from multiple gauges on calculation range via datacage.
Fri, 17 Oct 2014 19:21:45 +0200 Tom Gottfried Antiprogramming (in german: 'Softwareabwicklung')
Fri, 17 Oct 2014 19:13:40 +0200 Tom Gottfried i18n cleanup.
Fri, 17 Oct 2014 18:20:33 +0200 Tom Gottfried Load sounding width via recommendations for bed height differences and cleanup and fix related bed height macros.
Fri, 17 Oct 2014 17:39:34 +0200 Tom Gottfried Remove obsolete class.
Fri, 17 Oct 2014 17:29:30 +0200 Raimund Renkert Do not add a sounding width facet for bed height differences.
Fri, 17 Oct 2014 17:21:40 +0200 Raimund Renkert fixed bed difference export.
Fri, 17 Oct 2014 17:05:59 +0200 Tom Gottfried There might be no sounding width given at some stations of a bed height single.
Fri, 17 Oct 2014 16:08:25 +0200 Sascha L. Teichmann Removed obsolete import.
Fri, 17 Oct 2014 16:06:37 +0200 Sascha L. Teichmann Removed obsolete imports.
Fri, 17 Oct 2014 16:05:27 +0200 Sascha L. Teichmann Removed obsolete imports.
Fri, 17 Oct 2014 13:34:47 +0200 Raimund Renkert Added i18n strings for sounding width and data gap.
Fri, 17 Oct 2014 13:34:08 +0200 Raimund Renkert Bedheight differences exports sounding width and data gap for minuend and subtrahend.
Fri, 17 Oct 2014 13:17:12 +0200 Sascha L. Teichmann Only draw discharge curve if on same station as navigation.
Fri, 17 Oct 2014 12:50:35 +0200 Sascha L. Teichmann Removed morpho width from bed height diffs.
Fri, 17 Oct 2014 11:44:01 +0200 Tom Gottfried Do not filter bed heights by year in datacage for optional data (plus some cleanup).
Thu, 16 Oct 2014 16:45:53 +0200 Tom Gottfried Give ordered list of measurement stations at river.
Thu, 16 Oct 2014 13:39:22 +0200 Tom Gottfried Add comment to measurement stations info.
Thu, 16 Oct 2014 11:15:09 +0200 Tom Gottfried Reduce code duplication and repair filter for sediment load-recommendations.
Wed, 15 Oct 2014 19:48:20 +0200 Tom Gottfried SCHEMA CHANGE: 'comment' is not acceptable as column name for Oracle.
Wed, 15 Oct 2014 19:42:19 +0200 Tom Gottfried More detailed documentation on SQ-relation import.
Wed, 15 Oct 2014 19:35:35 +0200 Tom Gottfried We only want to use stations with an end km.
Wed, 15 Oct 2014 19:20:26 +0200 Tom Gottfried SCHEMA CHANGE: removed superfluous columns station and river_id from measurement_stations and adapted other components accordingly.
Wed, 15 Oct 2014 14:58:46 +0200 Tom Gottfried SCHEMA CHANGE: There is no boolean data type in oracle, and therefore it's no good idea to use it in postgresql.
Tue, 14 Oct 2014 19:21:33 +0200 Tom Gottfried Whitespace cleanup and small addition regarding sediment load at measurement stations.
Tue, 14 Oct 2014 16:33:54 +0200 Tom Gottfried Purge redundant station-column (the values will go to kmstart).
Tue, 14 Oct 2014 16:32:06 +0200 Tom Gottfried Purge sorting stations without range to end of list.
Tue, 14 Oct 2014 15:22:11 +0200 Tom Gottfried Put date range into facet descriptions for curve and measurements.
Tue, 14 Oct 2014 12:41:37 +0200 Tom Gottfried Distinguish between types of measurement stations and filter appropriately (plus minor cleanup in related classes).
Mon, 13 Oct 2014 17:22:52 +0200 Tom Gottfried Unify colors of SQ-relations and distinguish outliers by point size.
Mon, 13 Oct 2014 16:21:09 +0200 Tom Gottfried Remove non-mapped dependencies of removed theme.
Mon, 13 Oct 2014 14:40:47 +0200 Tom Gottfried Theme-style cleanup for discharge curves.
Fri, 10 Oct 2014 15:44:34 +0200 Tom Gottfried Add possibility to give custom client log4j.properties.
Fri, 10 Oct 2014 00:58:30 +0200 Tom Gottfried Added tag 3.1.7 for changeset 319aa972a1a3
Thu, 09 Oct 2014 12:13:56 +0200 Raimund Renkert Fixed date filter for fix overview. 3.1.7
Thu, 09 Oct 2014 12:20:48 +0200 Tom Gottfried Log successful/unsuccessful authentication without traceback.
Thu, 09 Oct 2014 12:13:30 +0200 Sascha L. Teichmann Backed out changeset da67b2bca1c0 Not needed.
Thu, 09 Oct 2014 11:57:17 +0200 Sascha L. Teichmann Fixing overview filter: Accept date range as UNIX time stamps, too.
Wed, 08 Oct 2014 16:28:02 +0200 Raimund Renkert Add location data to sq relation artifact. Fixed station name.
Wed, 08 Oct 2014 16:23:46 +0200 Raimund Renkert Added location to measurement station sq relation.
Wed, 08 Oct 2014 15:41:47 +0200 Tom Gottfried Further subtitle cleanup (including obsolete classes using them).
Wed, 08 Oct 2014 12:27:53 +0200 Raimund Renkert If context contains pnp, transform W to m.
Wed, 08 Oct 2014 11:49:07 +0200 Sascha L. Teichmann Only the master-artifact should decide about injected CURRENT_KM et al. (and removed dependend obsolete class).
Wed, 08 Oct 2014 11:02:16 +0200 Raimund Renkert Removed dependency to FixWQCurveGenerator in processor.
Tue, 07 Oct 2014 19:19:50 +0200 Tom Gottfried For whatever reason (if any) facet descriptions with trailing whitespace are stripped from the legend.
Tue, 07 Oct 2014 19:04:06 +0200 Tom Gottfried Removed some code duplication and moved macros to more appropriate places in file.
Tue, 07 Oct 2014 19:02:50 +0200 Tom Gottfried Fixed some typos in datacage docs.
Tue, 07 Oct 2014 15:23:08 +0200 Tom Gottfried Unify discharge curve subtitles.
Tue, 07 Oct 2014 13:41:54 +0200 Raimund Renkert Try to determine gauge by km in gauge discharge facet for exporter.
Tue, 07 Oct 2014 11:24:13 +0200 Tom Gottfried Use more recent SmartGWT-build.
Tue, 07 Oct 2014 11:23:39 +0200 Tom Gottfried Add possibility to give custom config for server log.
Mon, 06 Oct 2014 19:07:57 +0200 Tom Gottfried Transform export in cm at gauge. TODO: don't transfrom twice if coming from PegelInfo.
Mon, 06 Oct 2014 15:33:52 +0200 Raimund Renkert merged.
Mon, 06 Oct 2014 15:27:20 +0200 Raimund Renkert Use context constant for current km in fix delta w/t generator.
Mon, 06 Oct 2014 14:49:00 +0200 Tom Gottfried Purge RiverUtils from ATExporter.
Mon, 06 Oct 2014 13:41:14 +0200 Tom Gottfried Manual points shall be plotted in discharge diagrams.
Mon, 06 Oct 2014 11:21:42 +0200 Tom Gottfried It's the description we want to see in the legend, not the facet name.
Fri, 03 Oct 2014 10:26:58 +0200 Tom Gottfried Q-symmetric datacage configuration for user-data.
Thu, 02 Oct 2014 19:31:09 +0200 Tom Gottfried Make derived curve-diagram working with subtitle.
Thu, 02 Oct 2014 19:05:01 +0200 Tom Gottfried Re-add line previously removed accidentally between lots of comments.
Thu, 02 Oct 2014 18:57:10 +0200 Sascha L. Teichmann Added km sub title to fix derivate curve, too.
Thu, 02 Oct 2014 16:33:16 +0200 Sascha L. Teichmann Removed obsolete import.
Thu, 02 Oct 2014 14:02:57 +0200 Raimund Renkert merged.
Thu, 02 Oct 2014 14:01:13 +0200 Raimund Renkert Added i18n strings.
Thu, 02 Oct 2014 13:59:20 +0200 Raimund Renkert Fixed W/Q diagram subtitle in fix analysis.
Thu, 02 Oct 2014 13:57:50 +0200 Raimund Renkert Use the CURRENT_KM constant from injectors.
Thu, 02 Oct 2014 11:49:15 +0200 Tom Gottfried The current km is needed for SQ diagrams too.
Thu, 02 Oct 2014 11:46:44 +0200 Tom Gottfried Overwriting the current km in context gives unexpected results if artifacts from different km have been loaded.
Thu, 02 Oct 2014 11:04:14 +0200 Tom Gottfried s/logger/log/ or removed unused logger.
Thu, 02 Oct 2014 10:13:31 +0200 Tom Gottfried dataset can be null.
Thu, 02 Oct 2014 09:55:31 +0200 Tom Gottfried Fetch current km from context (and remove obsolete or superfluous comments and logging).
Thu, 02 Oct 2014 09:42:12 +0200 Tom Gottfried wUnit might be null.
Wed, 01 Oct 2014 15:54:47 +0200 Tom Gottfried Purge obsolete representation of reference system for discharge tables.
Wed, 01 Oct 2014 15:42:55 +0200 Tom Gottfried Instead of adding datum to Q-values, correctly transform W-values to meter above datum.
Wed, 01 Oct 2014 15:24:21 +0200 Sascha L. Teichmann Removed obsolete imports.
Wed, 01 Oct 2014 15:21:54 +0200 Sascha L. Teichmann Removed obsolete imports.
Wed, 01 Oct 2014 14:13:41 +0200 Tom Gottfried Deliver historical discharge curves in meter, not centimeter over datum.
Wed, 01 Oct 2014 13:42:19 +0200 Raimund Renkert merged.
Wed, 01 Oct 2014 13:41:38 +0200 Raimund Renkert Use the current km from context for fix analysis W/Q subtitle.
Wed, 01 Oct 2014 13:40:39 +0200 Raimund Renkert Updated i18n strings.
Wed, 01 Oct 2014 13:40:04 +0200 Raimund Renkert Added y axis label to discharge processors.
Wed, 01 Oct 2014 13:37:27 +0200 Raimund Renkert Use i18n string for w in cm axis.
Wed, 01 Oct 2014 13:36:35 +0200 Raimund Renkert Fixed i18n string for x axis label in discharge curves.
Wed, 01 Oct 2014 13:40:30 +0200 Tom Gottfried Never ever set current km via RiverUtils.
Wed, 01 Oct 2014 13:37:43 +0200 Tom Gottfried Remove misplaced file extension.
Wed, 01 Oct 2014 12:23:39 +0200 Tom Gottfried Let injectors be strictly distinct from each other and give more meaningful names (they know what they do, not where they will be used. The latter is configuration).
Wed, 01 Oct 2014 12:13:28 +0200 Sascha L. Teichmann Correct url parameter in client.
Wed, 01 Oct 2014 12:01:46 +0200 Sascha L. Teichmann There ist no need to format a number as a string and then re-parse it to double to get its double value. Just take the double value!
Wed, 01 Oct 2014 11:07:52 +0200 Sascha L. Teichmann Removed obsolete imports.
Tue, 30 Sep 2014 15:18:09 +0200 Tom Gottfried Auto-include zero in Q-domain axis.
Tue, 30 Sep 2014 14:40:02 +0200 Raimund Renkert Use ws in m for duration curve.
Tue, 30 Sep 2014 13:03:55 +0200 Tom Gottfried Remove duplication of AnnotationHelper-code in ChartGenerator.
Tue, 30 Sep 2014 11:52:17 +0200 Tom Gottfried Allow W-mainvalues in SQ-relation.
Tue, 30 Sep 2014 11:50:43 +0200 Tom Gottfried Introduce annotations, which know to which axis they belong.
Tue, 30 Sep 2014 10:57:58 +0200 Raimund Renkert Create mainvalue facets before setting up the artifact.
Mon, 29 Sep 2014 15:49:04 +0200 Raimund Renkert Look for gauge if no pnp is set in the context and return w in cm if at gauge.
Fri, 26 Sep 2014 18:23:45 +0200 Tom Gottfried Scale second W-axis in cm according to first axis, which is expanded relative to the data, and set bounds for zooming purposes (plus a bit of cleanup in DiagramGenerator).
Fri, 26 Sep 2014 17:22:51 +0200 Tom Gottfried Avoid NPE if river is not accessible.
Fri, 26 Sep 2014 14:22:37 +0200 Tom Gottfried The derivative curve is also a discharge diagram.
Fri, 26 Sep 2014 14:18:27 +0200 Tom Gottfried Throw non-lethal XPathException if not at gauge instead of lethal PSQLException if at gauge.
Fri, 26 Sep 2014 10:53:26 +0200 Tom Gottfried Q-main values as recommendations in SQ. TODO: solve DDZ.
Fri, 26 Sep 2014 10:50:54 +0200 Tom Gottfried Let's be more generous with facet activity of main values.
Fri, 26 Sep 2014 10:17:02 +0200 Tom Gottfried bed_height_single.old_elevation_model_id is not NOT NULL.
Fri, 26 Sep 2014 09:44:48 +0200 Tom Gottfried Main values: Reduce code duplication and correct logic to specify whether we are at gauge or not.
Fri, 26 Sep 2014 08:40:20 +0200 Tom Gottfried Avoid NPE if no dataset is activated in theme list.
Fri, 26 Sep 2014 08:36:28 +0200 Raimund Renkert Added config for sq relation loaded via datacage.
Thu, 25 Sep 2014 17:25:07 +0200 Raimund Renkert merged.
Thu, 25 Sep 2014 17:24:35 +0200 Raimund Renkert Use the sq relation artifact to load data from datacage.
Thu, 25 Sep 2014 17:23:12 +0200 Raimund Renkert Inject current km and pnp into the context used to calculate W in cm at gauge.
Thu, 25 Sep 2014 12:21:47 +0200 Tom Gottfried Reduce misspelled, superfluous logging.
Thu, 25 Sep 2014 11:00:31 +0200 Sascha L. Teichmann Removed obsolete imports.
Thu, 25 Sep 2014 10:56:44 +0200 Sascha L. Teichmann Use right logger in DischargeGenerator.
Thu, 25 Sep 2014 10:38:21 +0200 Sascha L. Teichmann Run native2ascii over FLYS*.properties.
Wed, 24 Sep 2014 18:33:11 +0200 Sascha L. Teichmann Added missing l10n strings.
Wed, 24 Sep 2014 17:39:29 +0200 Sascha L. Teichmann Generate a W in CM axis if there are W data.
Wed, 24 Sep 2014 16:42:55 +0200 Sascha L. Teichmann Added PNP injectors to Q/X diagrams.
Wed, 24 Sep 2014 16:38:13 +0200 Sascha L. Teichmann And Developer said, Let there be Q symmetry and there was Q symmetry.
Wed, 24 Sep 2014 16:24:32 +0200 Tom Gottfried Do not die if values <= 0 are tried to be plotted on log axis.
Wed, 24 Sep 2014 13:29:34 +0200 Tom Gottfried Make ChartArea and thus annotations sensible for logarithmic axes (plus some minor cleanup).
Wed, 24 Sep 2014 12:16:53 +0200 Sascha L. Teichmann Removed obsolete imports.
less more | rev 8554: (0) -3000 -1000 -240 +240 +1000 tip
http://dive4elements.wald.intevation.org