log

age author description
Wed, 03 Jul 2013 11:36:43 +0200 Felix Wolfsteller issue1370: In GWT chart property editor, suppres editing the "W [cm]" axis.
Wed, 03 Jul 2013 09:34:02 +0200 Felix Wolfsteller In analogy to w values allow q values to be calculated at the
Tue, 02 Jul 2013 15:43:11 +0200 Felix Wolfsteller MainValuesArtifact: Prevent NPE.
Tue, 02 Jul 2013 15:36:46 +0200 Felix Wolfsteller FixWQCurveGenerator: Set same tolerance to "at Gauge?"-definition as in other w/q cases.
Tue, 02 Jul 2013 15:03:04 +0200 Felix Wolfsteller FixWQCurveGenerator: Make second axis initial extends match first one.
Tue, 02 Jul 2013 09:57:55 +0200 Felix Wolfsteller RiverUtils: Made two debug output lines unique.
Tue, 02 Jul 2013 09:57:17 +0200 Felix Wolfsteller Antidoc: Strip "This method" from short doc strings.
Tue, 02 Jul 2013 08:21:10 +0200 Felix Wolfsteller issue1370: Translate main values if needed.
Tue, 02 Jul 2013 07:12:50 +0200 Felix Wolfsteller doc
Tue, 02 Jul 2013 07:11:59 +0200 Felix Wolfsteller MainValuesWFacet: Fetch the gauge-respecting mainvalues if in a navigable chart
Tue, 02 Jul 2013 07:10:25 +0200 Felix Wolfsteller MainValuesArtifact: Added method to determine whether at gauge or not.
Tue, 02 Jul 2013 07:09:19 +0200 Felix Wolfsteller Minor refactoring in MainValuesArtifact.
Mon, 01 Jul 2013 09:47:43 +0200 Andre Heinecke Added tag 3.0.10 for changeset bfcb513c1fda
Mon, 01 Jul 2013 09:47:38 +0200 Andre Heinecke Removed tag 3.0.10 3.0.10
Sat, 29 Jun 2013 09:32:44 +0200 Sascha L. Teichmann Merged
Sat, 29 Jun 2013 09:27:19 +0200 Sascha L. Teichmann Artifacts: Another fix for the 'Amtlichen Linien'. Stupid copy/paste error while taking the range of a gauge.
Fri, 28 Jun 2013 21:08:23 +0200 Tom Gottfried Longitudinal sections: partly renamed outs and configured recommendations at once
Fri, 28 Jun 2013 21:05:52 +0200 Tom Gottfried More consistent labeling for longitudinal section diagrams
Fri, 28 Jun 2013 21:57:30 +0200 Tom Gottfried Added tag 3.0.10 for changeset 5f4893db41e4
Fri, 28 Jun 2013 18:20:27 +0200 Felix Wolfsteller Doc.
Fri, 28 Jun 2013 17:00:44 +0200 Felix Wolfsteller Doc.
Fri, 28 Jun 2013 21:12:48 +0200 Sascha L. Teichmann Artifacts: DEACTIVATE SOME PATHS IN THE APP FOR THE 3.0.10 RELEASE. UNDO IT AFTERWARDS!
Fri, 28 Jun 2013 20:36:51 +0200 Sascha L. Teichmann GWT client: Removed obsolete imports.
Fri, 28 Jun 2013 20:26:05 +0200 Sascha L. Teichmann Artifacts: Removed obsolete imports.
Fri, 28 Jun 2013 20:20:14 +0200 Sascha L. Teichmann artifacts: Desktop-FLYS conform official line messages in error reports.
Fri, 28 Jun 2013 19:32:43 +0200 Tom Gottfried merged changes from default into double-precision branch double-precision
Fri, 28 Jun 2013 19:24:46 +0200 Sascha L. Teichmann Backend: WST parser. Detect ranges of years in column-datum
Fri, 28 Jun 2013 17:48:04 +0200 Tom Gottfried merged changes from default into double-precision branch double-precision
Fri, 28 Jun 2013 17:47:27 +0200 Sascha L. Teichmann Fix import of source from wst-files
Fri, 28 Jun 2013 17:03:48 +0200 Tom Gottfried merged changes from default into double-precision branch double-precision
Fri, 28 Jun 2013 17:00:55 +0200 Sascha L. Teichmann Backend: Store source of a wst column if available.
Fri, 28 Jun 2013 16:59:07 +0200 Tom Gottfried merged changes from default into double-precision branch double-precision
Fri, 28 Jun 2013 16:58:46 +0200 Tom Gottfried Schema change: add new field 'source' to wst_columns, currently only for official lines double-precision
Fri, 28 Jun 2013 14:11:58 +0200 Sascha L. Teichmann Amtl. Linien: Added report if an official line was found in report.
Fri, 28 Jun 2013 14:00:15 +0200 Felix Wolfsteller SedimentLoadCalculation: Handle boring cases in total sed load calculation.
Fri, 28 Jun 2013 13:59:45 +0200 Felix Wolfsteller issue1235: Avoid NPE.
Fri, 28 Jun 2013 13:59:15 +0200 Felix Wolfsteller issue1235: sort km when running over them for total sediment load.
Fri, 28 Jun 2013 11:30:35 +0200 Felix Wolfsteller SedimentLoadLSGenerator: Added vimline.
Fri, 28 Jun 2013 11:29:33 +0200 Felix Wolfsteller Doc.
Fri, 28 Jun 2013 13:37:00 +0200 Sascha L. Teichmann added recommendation for official lines in cross sections
Fri, 28 Jun 2013 12:52:51 +0200 Sascha L. Teichmann Amtl. Linien: Fixed problem that only a random official line is detect.
Fri, 28 Jun 2013 11:25:41 +0200 Felix Wolfsteller issue1383: Create new facet und resolve issue. Double-click symetry remains.
Fri, 28 Jun 2013 11:24:45 +0200 Felix Wolfsteller issue1383: FixWQCurveGenerator: handle new facet type.
Fri, 28 Jun 2013 11:23:54 +0200 Felix Wolfsteller issue1383: Added new facet type to fix_wq facet compat list, removed culprit longitudinal_section.w for now.
Fri, 28 Jun 2013 11:23:06 +0200 Felix Wolfsteller issue1383: Added new facet type.
Fri, 28 Jun 2013 09:53:53 +0200 Felix Wolfsteller FixRealizingCompute: Add hsah and id parameter to constructing call of
Fri, 28 Jun 2013 09:53:04 +0200 Felix Wolfsteller FixWaterlevelFacet: Turn around hash and stateId parameter in constructor, as in DataFacet.
Fri, 28 Jun 2013 09:52:38 +0200 Felix Wolfsteller fixanalysis: remove event facet (issue1372).
Fri, 28 Jun 2013 09:52:16 +0200 Felix Wolfsteller fixanalysis.xml: Make longitudinal conf same as in winfo.
Fri, 28 Jun 2013 09:43:25 +0200 Felix Wolfsteller WaterlevelFacet: Added a comment.
Thu, 27 Jun 2013 21:55:44 +0200 Felix Wolfsteller issue1372: Removed Event facet from vollmer curve.
Thu, 27 Jun 2013 12:03:38 +0200 Felix Wolfsteller issue1370: ExtremeWQCurveGenerator: correct second y axis label (cm).
Thu, 27 Jun 2013 18:14:49 +0200 Sascha L. Teichmann Official lines: Use river id instead of river name to be more precise when finding out which main values has a official line.
Thu, 27 Jun 2013 18:08:41 +0200 Sascha L. Teichmann Reference only Q main values for official lines double-precision
Thu, 27 Jun 2013 17:42:22 +0200 Christian Lins More robustness in FLYS.onModuleLoad() service calls.
Thu, 27 Jun 2013 17:36:51 +0200 Christian Lins Use help-url provided by ServerInfoService (fix for #1197).
Thu, 27 Jun 2013 17:25:12 +0200 Christian Lins Enable ServerInfoService (!! CONFIG !!).
Thu, 27 Jun 2013 16:24:55 +0200 Tom Gottfried 'start' is a reserved word in Oracle
Thu, 27 Jun 2013 14:51:04 +0200 Christian Lins Minor fix for ServerInfoService.
Thu, 27 Jun 2013 14:48:21 +0200 Christian Lins Add client side servlets and service stubs for ServerInfoService.
Thu, 27 Jun 2013 12:02:09 +0200 Felix Wolfsteller issue1370: FixWQCurveGenerator: second y axis for fix-w/q diagrams.
Thu, 27 Jun 2013 11:53:38 +0200 Felix Wolfsteller FixWQCurveGenerator: Fix second y axis label.
Thu, 27 Jun 2013 10:47:31 +0200 Felix Wolfsteller Doc.
Thu, 27 Jun 2013 10:47:13 +0200 Felix Wolfsteller ExtremeWQCurveGenerator: Put data on cm axis if at gauge.
Thu, 27 Jun 2013 10:46:13 +0200 Felix Wolfsteller i18n for axis labels.
Thu, 27 Jun 2013 10:45:41 +0200 Felix Wolfsteller ExtremeWQCurveGenerator: Fix axis labels.
Thu, 27 Jun 2013 10:44:59 +0200 Felix Wolfsteller ExtremeWQCurveGenerator: Do not use axis index directly. never.
Thu, 27 Jun 2013 10:44:31 +0200 Felix Wolfsteller FixWQCurveGenerator: Introduce second (cm) axis.
Thu, 27 Jun 2013 10:42:57 +0200 Felix Wolfsteller Removed indentation and added doc for prepare*Data.
Thu, 27 Jun 2013 10:41:36 +0200 Felix Wolfsteller StyledSeriesBuilder: More convenience methods to scale and translate values while adding.
Thu, 27 Jun 2013 10:40:50 +0200 Felix Wolfsteller Doc.
Thu, 27 Jun 2013 10:39:56 +0200 Felix Wolfsteller add tolerance to getCurrentGaugeDatum .
Wed, 26 Jun 2013 23:10:42 +0200 Felix Wolfsteller SyncNumberAxis: Open up constructor and setter of shift (why were these protected anyway?)
Wed, 26 Jun 2013 23:07:51 +0200 Felix Wolfsteller Added translations for fix w/q y- axis.
Wed, 26 Jun 2013 23:03:28 +0200 Felix Wolfsteller ComputedDischargeCurveGenerator: Removed garbage.
Thu, 27 Jun 2013 09:14:57 +0200 Raimund Renkert Added missing image to highlight 'Unstrut' on interactive image map.
Wed, 26 Jun 2013 23:10:34 +0200 Raimund Renkert Added tag 3.0.9 for changeset 41152c3a532d
Wed, 26 Jun 2013 23:07:24 +0200 Christian Lins Add ServerInfoService (currently inactive). 3.0.9
Wed, 26 Jun 2013 22:28:42 +0200 Raimund Renkert Call official lines macro in system context and fixed the macro.
Wed, 26 Jun 2013 22:23:57 +0200 Raimund Renkert Fixed container context variables: to upper case.
Wed, 26 Jun 2013 22:25:19 +0200 Felix Wolfsteller issue1370: Now that the default first y axis is in cm, change default label.
Wed, 26 Jun 2013 22:06:15 +0200 Felix Wolfsteller issue1370: swap default axis (now in cm), translate annotations if in cm.
Wed, 26 Jun 2013 21:13:43 +0200 Felix Wolfsteller StickyAxisAnnotation: Add setter for pos and docs.
Wed, 26 Jun 2013 21:51:47 +0200 Bernhard Reiter Corrected typos in "Eingabe fär Q Daten".
Wed, 26 Jun 2013 21:35:53 +0200 Sascha L. Teichmann GWT client: prevent too many create artifact calls at the same time by limiting them to 5.
Wed, 26 Jun 2013 21:22:37 +0200 Tom Gottfried Import main values of type '-' by default double-precision
Wed, 26 Jun 2013 20:50:58 +0200 Sascha L. Teichmann Set tokm and fromkm to location if we are at a location to apply km-filtering correctly
Wed, 26 Jun 2013 16:46:43 +0200 Felix Wolfsteller Add doc and override-annotation.
Wed, 26 Jun 2013 16:46:27 +0200 Felix Wolfsteller Adjust label of second y axis to show cm if it is the "cm" axis.
Wed, 26 Jun 2013 16:45:43 +0200 Felix Wolfsteller Moved code from ComputedDischargeCurveGenerator to DischargeCurveGenerator.
Wed, 26 Jun 2013 16:44:30 +0200 Felix Wolfsteller Remove unused definitions.
Wed, 26 Jun 2013 16:40:25 +0200 Tom Gottfried merged changes from default into double-precision branch double-precision
Wed, 26 Jun 2013 16:36:30 +0200 Felix Wolfsteller issue1313: Prevent double skip when looking at the first lines of a prf file.
Wed, 26 Jun 2013 15:09:33 +0200 Felix Wolfsteller ComputedDischargeCurveGenerator: Renamed function.
Wed, 26 Jun 2013 15:28:46 +0200 Tom Gottfried fix typo in make_release.sh
Wed, 26 Jun 2013 15:15:14 +0200 Raimund Renkert Enabled basedata datacage in fix analysis ls.
Wed, 26 Jun 2013 14:54:48 +0200 Felix Wolfsteller FixWQCurveGenerator: Remove second y axis (Q?), reference axis by enums id.
Wed, 26 Jun 2013 14:42:16 +0200 Christian Lins Info-Button now leads to $WIKI_URL/Info. Ticket for authentication not implemented yet.
Wed, 26 Jun 2013 13:53:18 +0200 Raimund Renkert Updated highlighting areas and added new image tag for 'Saale-Zwischen'.
Wed, 26 Jun 2013 13:51:34 +0200 Raimund Renkert Updated images for interactive image map.
Wed, 26 Jun 2013 13:33:15 +0200 Sascha L. Teichmann Partial fix for flys/1303
Wed, 26 Jun 2013 13:26:43 +0200 Raimund Renkert Do wqkms q facets out in discharge ls generator.
Wed, 26 Jun 2013 13:25:37 +0200 Raimund Renkert Added wqkms q and w facets to w differences config.
Wed, 26 Jun 2013 12:45:05 +0200 Tom Gottfried merge
Wed, 26 Jun 2013 12:38:43 +0200 Tom Gottfried Enable annotations in mean bed height longitudinal section diagramm.
Wed, 26 Jun 2013 12:40:27 +0200 Felix Wolfsteller issue1370: Add discharge q data to second axis.
Wed, 26 Jun 2013 12:38:54 +0200 Felix Wolfsteller issue1370: StyledSeriesBuilder: Added add function with translation and scale factors.
Wed, 26 Jun 2013 12:37:33 +0200 Felix Wolfsteller issue1370: Prepare a second y axis.
Wed, 26 Jun 2013 12:32:26 +0200 Felix Wolfsteller Cosmetics, doc.
Wed, 26 Jun 2013 12:32:03 +0200 Felix Wolfsteller Doc.
Wed, 26 Jun 2013 12:30:07 +0200 Felix Wolfsteller issue1370: Let a hypothetical second y axis be an SyncNumberAxis depending on first.
Wed, 26 Jun 2013 12:28:10 +0200 Felix Wolfsteller issue1370: helper to find Gauge datum if any.
Wed, 26 Jun 2013 12:26:40 +0200 Felix Wolfsteller ChartGenerator: Added getter for master artifact.
Wed, 26 Jun 2013 12:25:22 +0200 Felix Wolfsteller issue1370: Initial commit for new SyncNumberAxis.
Wed, 26 Jun 2013 11:32:44 +0200 Christian Lins Merged
Wed, 26 Jun 2013 11:32:06 +0200 Christian Lins Add replacement rule for wiki url in make_release.sh
Wed, 26 Jun 2013 10:39:10 +0200 Christian Lins Make wiki url configurable in gwt client (flys/#1197). It's probably better to retrieve
Tue, 25 Jun 2013 15:18:43 +0200 Tom Gottfried Importer: add skip flag for measurement stations to scripts
Tue, 25 Jun 2013 13:34:03 +0200 Tom Gottfried merged changes from default into double-precision branch double-precision
Tue, 25 Jun 2013 13:22:25 +0200 Tom Gottfried Flow Velocity Model Parser: another fix of main value guessing double-precision
Tue, 25 Jun 2013 10:57:08 +0200 Tom Gottfried Flow Velocity Parser: fixed regular expression for guessing main values double-precision
Tue, 25 Jun 2013 09:01:45 +0200 Felix Wolfsteller issue1259: fixing initial selected input helper tab. Believing that there is a bug in TabSet.
Tue, 25 Jun 2013 08:05:36 +0200 Felix Wolfsteller issue1235: revert some changes, use correct Schwebstoff/Geschiebe-measurement-stations.
Tue, 25 Jun 2013 07:59:44 +0200 Felix Wolfsteller Revert to rev 6404 for issue1235
Mon, 24 Jun 2013 15:24:07 +0200 Tom Gottfried merge changes from default into double-precision branch double-precision
Mon, 24 Jun 2013 15:02:26 +0200 Sascha L. Teichmann Backend: Fixed broken HQL statement in OfficialLine.
Mon, 24 Jun 2013 13:23:41 +0200 Sascha L. Teichmann Backend: Re-inserted OfficialLine.fetchAllOfficalLines()
Mon, 24 Jun 2013 11:06:08 +0200 Felix Wolfsteller issue1313: Use correct skip lines. In case of recognizing skip, the
Mon, 24 Jun 2013 10:35:35 +0200 Felix Wolfsteller issue1235: Fix, suspSand is also measured at susp-measurement stations (Schwebstoff).
Mon, 24 Jun 2013 10:34:55 +0200 Felix Wolfsteller issue1235: Respect that suspSand values are also measured at "suspended" (Schwebstoff)
Mon, 24 Jun 2013 10:15:34 +0200 Felix Wolfsteller prep issue1235: Rename functions and variable to indicate use of other susp values.
Fri, 21 Jun 2013 18:22:55 +0200 Felix Wolfsteller ComputedDischargeCurveGenerator: Fix misleading debug output.
Sat, 22 Jun 2013 00:13:52 +0200 Sascha L. Teichmann Datacage: Stop execution of dc:container-context earlier if there are nor results at all.
Sat, 22 Jun 2013 00:03:18 +0200 Sascha L. Teichmann Datacage: Rewrote the loading of the official lines based on the latest changes. Untested!
Fri, 21 Jun 2013 23:35:01 +0200 Sascha L. Teichmann Datacage: Store the official lines of an artifact under the key 'official-lines'. Can be treated with <dc:container-context>.
Fri, 21 Jun 2013 20:02:15 +0200 Sascha L. Teichmann Datacage: Introduced <dc:container-context>.
Fri, 21 Jun 2013 18:09:53 +0200 Andre Heinecke Add null pointer guard before encode
Fri, 21 Jun 2013 17:36:50 +0200 Sascha L. Teichmann Artifacts: Official lines finder: handle the cases from the state model.
Fri, 21 Jun 2013 17:28:57 +0200 Raimund Renkert Set image size in image map to have initial scroll bars.
Fri, 21 Jun 2013 16:28:47 +0200 Sascha L. Teichmann Artifacts: Official lines: Only apply in Q-Calculations and filter against the ranges of the gauges.
Fri, 21 Jun 2013 15:37:32 +0200 Raimund Renkert New themes for sediment load fraction 'unknown'.
Fri, 21 Jun 2013 15:36:48 +0200 Raimund Renkert Draw sediment load fraction 'unknown' in chart.
Fri, 21 Jun 2013 15:35:44 +0200 Raimund Renkert Load sedimentload fraction with sedimentload factory and add new facets to artifact.
Fri, 21 Jun 2013 15:33:06 +0200 Raimund Renkert Added new fraction 'unknown' to SedimentLoadFractions.
Fri, 21 Jun 2013 15:31:07 +0200 Raimund Renkert New facet type in FacetTypes.
Fri, 21 Jun 2013 15:30:26 +0200 Raimund Renkert Added new facet to minfo artifact config.
Fri, 21 Jun 2013 15:29:41 +0200 Raimund Renkert New Facet for sediment load fraction 'unknown'.
Fri, 21 Jun 2013 14:35:18 +0200 Tom Gottfried Flow velocity model parser: be more tolerant with main value strings in meta line double-precision
Fri, 21 Jun 2013 14:34:06 +0200 Tom Gottfried Flow velocity model parser: more and improved log output double-precision
Fri, 21 Jun 2013 12:46:59 +0200 Sascha L. Teichmann Artifacts: First part of the official lines guessing.
Fri, 21 Jun 2013 12:15:30 +0200 Andre Heinecke Further fix encoding handling in the print service
Fri, 21 Jun 2013 11:42:35 +0200 Felix Wolfsteller SedimentLoadResult: Add getter for load.
Fri, 21 Jun 2013 11:42:11 +0200 Felix Wolfsteller SedimentLoadFacet: Now that we have total load values with correct ranges in
Fri, 21 Jun 2013 11:41:10 +0200 Felix Wolfsteller SedimentLoadCalculation: Calculate and set Total Load values ind a brutal range merging manner.
Fri, 21 Jun 2013 11:34:22 +0200 Felix Wolfsteller Range: Add start and end setters, doc, clone function.
Fri, 21 Jun 2013 10:20:28 +0200 Andre Heinecke Search the river name also in the map.river state
Thu, 20 Jun 2013 17:55:18 +0200 Sascha L. Teichmann Artifacts: instanceof null == false, so extra null check needed.
Thu, 20 Jun 2013 16:10:58 +0200 Felix Wolfsteller Fix typos and NPEs.
Thu, 20 Jun 2013 11:42:47 +0200 Felix Wolfsteller SedimentLoad*: Switch from snake_case to camelCase.
Thu, 20 Jun 2013 10:09:41 +0200 Felix Wolfsteller declare nextStep variable for future use.
Thu, 20 Jun 2013 09:06:23 +0200 Felix Wolfsteller SedimentLoad*: Set range to fraction/fractions values.
Wed, 19 Jun 2013 16:53:27 +0200 Felix Wolfsteller Add fields, getters and setters for ranges in SedimentLoadFraction.
Wed, 19 Jun 2013 09:40:38 +0200 Felix Wolfsteller Add hashCode and equals implementation to Range.
Wed, 19 Jun 2013 15:03:05 +0200 Sascha L. Teichmann GWT client: Display official lines in helper panels.
Tue, 18 Jun 2013 19:33:40 +0200 Sascha L. Teichmann fix official lines import double-precision
Tue, 18 Jun 2013 19:32:31 +0200 Tom Gottfried Minimal schema change: allow longer names in discharge zones double-precision
Tue, 18 Jun 2013 17:30:28 +0200 Sascha L. Teichmann Merged
Tue, 18 Jun 2013 17:28:27 +0200 Sascha L. Teichmann Backend: Fixed Oracle scheme for official lines.
Tue, 18 Jun 2013 16:05:10 +0200 Tom Gottfried merged changes from default into double-precision branch double-precision
Tue, 18 Jun 2013 15:02:19 +0200 Raimund Renkert Added tag 3.0.8 for changeset eec895f6ec80
Tue, 18 Jun 2013 13:53:58 +0200 Raimund Renkert Fixed y axis label generation in sedimentload generator. 3.0.8
Tue, 18 Jun 2013 13:25:52 +0200 Raimund Renkert Add annotations to sediment load chart.
Tue, 18 Jun 2013 13:25:27 +0200 Raimund Renkert Test if artifact in a MINFO artifact to avoid NPE when getting unit data.
Tue, 18 Jun 2013 13:14:51 +0200 Raimund Renkert Set initial facet activity for sediment load fractions.
Tue, 18 Jun 2013 10:59:58 +0200 Raimund Renkert New images and hover areas for Saale and Saale-Thüringen.
Tue, 18 Jun 2013 09:26:00 +0200 Raimund Renkert Skip calculation parameters if no bed diameter data exist in CSV exporter.
Tue, 18 Jun 2013 09:09:42 +0200 Raimund Renkert Order bed quality data by km.
Tue, 18 Jun 2013 09:09:08 +0200 Raimund Renkert Fixed bed quality data facet index to get the correct diameter.
Mon, 17 Jun 2013 21:51:04 +0200 Sascha L. Teichmann Artifacts: Scan the official lines associated with a main value if it applies for the current river.
Mon, 17 Jun 2013 21:49:31 +0200 Sascha L. Teichmann Backend: Added one to many getter to fetch the official lines associated with a namend main value.
Mon, 17 Jun 2013 17:39:42 +0200 Raimund Renkert Removed umlaut stripping for image map and renamed 'Saale Thüringen'.
Mon, 17 Jun 2013 17:16:25 +0200 Tom Gottfried flow velocity model parser: accept braces in names of upper discharge double-precision
Mon, 17 Jun 2013 16:18:40 +0200 Raimund Renkert Insert Double.NaN for missing values in bed height factory.
Mon, 17 Jun 2013 15:37:26 +0200 Raimund Renkert Use Double.NaN for missing values in middle bedheight calculation and write empty strings in csv export.
Mon, 17 Jun 2013 14:30:00 +0200 Raimund Renkert Fixed SQ relation total bedload: Use the correct input data for calculation.
Mon, 17 Jun 2013 13:18:00 +0200 Christian Lins Fix the "Saale-Thüringen" hover effect in the interactive JS map.
Mon, 17 Jun 2013 12:05:49 +0200 Christian Lins Renaming "Thüringen" -> "Thueringen" to fix interactive JS map (#1322).
Fri, 14 Jun 2013 18:25:12 +0200 Sascha L. Teichmann Backend: Store official lines from config if they are any.
Fri, 14 Jun 2013 18:15:49 +0200 Sascha L. Teichmann Backend: Only use name of official config line as name of main value.
Fri, 14 Jun 2013 18:12:22 +0200 Sascha L. Teichmann Backend: Joined official lines with there importer model.
Fri, 14 Jun 2013 17:56:52 +0200 Sascha L. Teichmann Backend: Added importer model for official lines.
Fri, 14 Jun 2013 17:11:33 +0200 Felix Wolfsteller issue1235: Values are valid until next measurements station range start.
Fri, 14 Jun 2013 17:09:25 +0200 Felix Wolfsteller SedimentLoadFacet, issue1235: Ignore values not measured at measurement stations
Fri, 14 Jun 2013 17:08:31 +0200 Felix Wolfsteller Comment.
Fri, 14 Jun 2013 11:56:18 +0200 Felix Wolfsteller In prep for 1235: Renamed variables for improved readability.
Fri, 14 Jun 2013 16:56:30 +0200 Sascha L. Teichmann Backend: Added special ImportWstColumns for official lines. They have to be glued with the main values.
Fri, 14 Jun 2013 16:46:33 +0200 Tom Gottfried merge changes from default into double-precision double-precision
Fri, 14 Jun 2013 16:11:49 +0200 Sascha L. Teichmann Backend: Create ImportWsts for official lines expicitly. They are going to be somewhat special. Removed some cruft from the WstParser.
Fri, 14 Jun 2013 13:25:23 +0200 Sascha L. Teichmann Backend: Added factory to ImportWst to create columns which are derived from ImportWstColumns. This will be handy when creating columns for the official lines.
Fri, 14 Jun 2013 13:01:26 +0200 Sascha L. Teichmann Backend: First steps to integrate parsing of official config files.
Fri, 14 Jun 2013 12:32:28 +0200 Sascha L. Teichmann Backend: Extended list of recognized main value names in STA/official line classification
Fri, 14 Jun 2013 12:30:38 +0200 Sascha L. Teichmann Backend: Removed cruft code
Thu, 13 Jun 2013 17:24:56 +0200 Andre Heinecke Remove createBarriersLayer and createBarriers
Thu, 13 Jun 2013 17:23:51 +0200 Andre Heinecke Use group layer instead of adding two layers to barriers facet
Thu, 13 Jun 2013 17:17:45 +0200 Andre Heinecke Group barriers layer and fix polygon layer path to shapefile
Thu, 13 Jun 2013 17:17:06 +0200 Andre Heinecke Give the polygon barriers class a nice name
Thu, 13 Jun 2013 17:15:34 +0200 Sascha L. Teichmann Backend: Moved guessing of main values and there time intervals out of the STA parser. Same come will be useful to extend the WST parser to better handle official lines.
Thu, 13 Jun 2013 13:12:48 +0200 Sascha L. Teichmann Backend: removed scale factor from min/max value determination of gauge Ws.
Thu, 13 Jun 2013 12:48:12 +0200 Sascha L. Teichmann Artifacts: Moved code from WINFO artifact into state where it belongs.
Thu, 13 Jun 2013 11:43:02 +0200 Andre Heinecke Add special case handling for Fixing AT export at a gauge
Thu, 13 Jun 2013 10:01:01 +0200 Andre Heinecke Add location handling in waterlevels-fix macro
Thu, 13 Jun 2013 09:43:50 +0200 Andre Heinecke Fix dc:fromValue and dc:toValue for locations
Thu, 13 Jun 2013 09:22:46 +0200 Andre Heinecke Add SQ Relation KM formatter and use it fopr issue 1071
Thu, 13 Jun 2013 09:09:56 +0200 Felix Wolfsteller Doc.
Thu, 13 Jun 2013 07:12:35 +0200 Felix Wolfsteller issue1335: Set a single (0) QRange for Waterlevel diffs from csv.
Wed, 12 Jun 2013 12:36:43 +0200 Felix Wolfsteller issue1354: TimeIntervals in Waterlevels from csv files.
Wed, 12 Jun 2013 18:21:48 +0200 Sascha L. Teichmann Artifacts: Comment out broken official lines loading from datacage.
Wed, 12 Jun 2013 18:09:18 +0200 Andre Heinecke Add gauge validity information to dischargecurve exporter
Wed, 12 Jun 2013 18:13:47 +0200 Sascha L. Teichmann GWT client: Removed obsolete imports.
Wed, 12 Jun 2013 18:10:36 +0200 Sascha L. Teichmann Artifacts: Removed obsolete import.
Wed, 12 Jun 2013 18:08:31 +0200 Sascha L. Teichmann Backend: Removed obsolete import.
Wed, 12 Jun 2013 18:01:42 +0200 Sascha L. Teichmann Backend: Add Hibernate model for official lines.
Wed, 12 Jun 2013 17:46:56 +0200 Andre Heinecke Assume that the result is calculated if the wUnit is meter
Wed, 12 Jun 2013 17:46:22 +0200 Andre Heinecke Format km's in computed discharge export
Wed, 12 Jun 2013 17:45:56 +0200 Andre Heinecke Don't print two header at calculated gauges
Wed, 12 Jun 2013 17:45:35 +0200 Andre Heinecke Correctly set the reference system after conversion
Wed, 12 Jun 2013 16:59:46 +0200 Andre Heinecke Use the river unit in csv export if not converted
Wed, 12 Jun 2013 16:57:55 +0200 Andre Heinecke Only show gauge information if available
Wed, 12 Jun 2013 16:20:09 +0200 Andre Heinecke Remove some accidental debug output
Wed, 12 Jun 2013 16:10:56 +0200 Andre Heinecke Update PDF/CSV export for discharge curves
Wed, 12 Jun 2013 16:07:28 +0200 Andre Heinecke Rework ATWriter/Exporter
Wed, 12 Jun 2013 16:02:33 +0200 Andre Heinecke Add another constructor that takes a WQ object as parameter
Wed, 12 Jun 2013 16:01:46 +0200 Andre Heinecke Add conversion function that prepares a WQ table for export at gauge
Wed, 12 Jun 2013 10:54:27 +0200 Andre Heinecke Remove discharge table scaling but add reference system to W
Wed, 12 Jun 2013 16:36:34 +0200 Sascha L. Teichmann Backend: Modified schema for a better model of official lines.
Wed, 12 Jun 2013 14:28:37 +0200 Christian Lins Add missing hover image for "Saar (Wiltinger Bogen)" (#1322).
Wed, 12 Jun 2013 14:25:58 +0200 Tom Gottfried Bedheight single parser: do not reject lines with missing values double-precision
Wed, 12 Jun 2013 12:00:17 +0200 Felix Wolfsteller Weird merge.
Wed, 12 Jun 2013 11:51:25 +0200 Felix Wolfsteller Minor refac.
Wed, 12 Jun 2013 11:43:34 +0200 Felix Wolfsteller Remove code dupe, doc.
Wed, 12 Jun 2013 11:27:36 +0200 Felix Wolfsteller Doc.
Wed, 12 Jun 2013 11:20:36 +0200 Felix Wolfsteller Waterl.Diff.Parser issue1354: Extract years from name, to later set timeintervals.
Wed, 12 Jun 2013 11:18:47 +0200 Felix Wolfsteller Doc.
Wed, 12 Jun 2013 11:52:19 +0200 Felix Wolfsteller WaterlevelDifferencesParser: issue1354/1, set timeintervals from waterdiff-csvs.
Wed, 12 Jun 2013 11:51:25 +0200 Felix Wolfsteller Minor refac.
Wed, 12 Jun 2013 11:43:34 +0200 Felix Wolfsteller Remove code dupe, doc.
Wed, 12 Jun 2013 11:27:36 +0200 Felix Wolfsteller Doc.
Wed, 12 Jun 2013 11:20:36 +0200 Felix Wolfsteller Waterl.Diff.Parser issue1354: Extract years from name, to later set timeintervals.
Wed, 12 Jun 2013 11:18:47 +0200 Felix Wolfsteller Doc.
Wed, 12 Jun 2013 10:43:30 +0200 Sascha L. Teichmann Whitespace correction and cminor ruft code removal.
Wed, 12 Jun 2013 10:34:43 +0200 Andre Heinecke Add date format for artifact creation time
Wed, 12 Jun 2013 10:28:36 +0200 Felix Wolfsteller Switch wst_kinds of Waterleve/-Differences (6/7).
Wed, 12 Jun 2013 10:26:45 +0200 Felix Wolfsteller Switch wst-kind of waterlevel/-differences (7 and 6).
Wed, 12 Jun 2013 09:43:02 +0200 Felix Wolfsteller Cosemetics, doc.
Wed, 12 Jun 2013 09:39:51 +0200 Felix Wolfsteller Doc.
Wed, 12 Jun 2013 10:13:55 +0200 Andre Heinecke Add km range to description of waterlevels for issue565
Tue, 11 Jun 2013 17:19:59 +0200 Andre Heinecke Revert halfhearted logfile move. (r6127)
Tue, 11 Jun 2013 16:41:16 +0200 Andre Heinecke Add non recommendations for bed_difference_height_year
Tue, 11 Jun 2013 15:26:47 +0200 Christian Lins Add missing 'Saale-Thüringen' and 'Saar (Wiltinger Bogen)' hover images links. The latter is not available yet.
Tue, 11 Jun 2013 14:58:13 +0200 Raimund Renkert Order bed heights by station.
Tue, 11 Jun 2013 13:17:18 +0200 Tom Gottfried merged changes from default into double-precision branch double-precision
Tue, 11 Jun 2013 13:03:50 +0200 Tom Gottfried Bed height parser: check for duplicate stations double-precision
Tue, 11 Jun 2013 12:57:51 +0200 Raimund Renkert Replaced the 'old school' wiki link buttons with default links.
Tue, 11 Jun 2013 12:41:33 +0200 Felix Wolfsteller WQAdaptedInputPanel: Ensure correct initial default selection ("Q").
Tue, 11 Jun 2013 12:19:01 +0200 Felix Wolfsteller issue1267: Polishing: Move the sorting into the db/sql-query.
Tue, 11 Jun 2013 12:05:01 +0200 Felix Wolfsteller Doc.
Tue, 11 Jun 2013 12:01:27 +0200 Felix Wolfsteller issue1267: Do not downscale height.
Tue, 11 Jun 2013 12:00:57 +0200 Felix Wolfsteller Added TODO about braindead code.
Tue, 11 Jun 2013 11:59:25 +0200 Felix Wolfsteller issue1267: Sort the list of FastCrossSections before binarySearching it.
Tue, 11 Jun 2013 11:58:54 +0200 Felix Wolfsteller Doc.
Tue, 11 Jun 2013 09:40:56 +0200 Tom Gottfried merge changes from default into double-precision branch double-precision
Tue, 11 Jun 2013 09:21:04 +0200 Raimund Renkert Added styles for bed quality themes to config.
Tue, 11 Jun 2013 09:20:14 +0200 Raimund Renkert Set facet activity, have the correct facet order and added new facet to bed quality.
Tue, 11 Jun 2013 09:18:30 +0200 Raimund Renkert Added new bedload diameter facet to config.
Tue, 11 Jun 2013 09:17:29 +0200 Raimund Renkert New facet for bedload diameter measurements.
Tue, 11 Jun 2013 09:16:41 +0200 Raimund Renkert Removed obsolete member and minor code style.
Tue, 11 Jun 2013 09:14:12 +0200 Raimund Renkert Never return 'null' for bed(load) diameters.
Tue, 11 Jun 2013 09:12:35 +0200 Raimund Renkert Bring bedload average diameter to 'mm'.
Tue, 11 Jun 2013 08:44:38 +0200 Tom Gottfried Corrected typo
Mon, 10 Jun 2013 21:26:22 +0200 Tom Gottfried AT-Parser: Do not change unit of W and Q in discharge tables
Mon, 10 Jun 2013 16:30:41 +0200 Raimund Renkert I18N strings for facet descriptions.
Mon, 10 Jun 2013 16:30:01 +0200 Raimund Renkert New theme for bed diameter measurement facets.
Mon, 10 Jun 2013 16:28:57 +0200 Raimund Renkert Generate facets for bed diameter measurements and draw them into the generated chart.
Mon, 10 Jun 2013 16:23:39 +0200 Raimund Renkert Added new facet types for bed diameter measurements.
Mon, 10 Jun 2013 16:22:23 +0200 Raimund Renkert Added container and facet for bed diameter measurements.
Mon, 10 Jun 2013 16:24:45 +0200 Andre Heinecke Added tag 3.0.7 for changeset 5733d7f27196
Mon, 10 Jun 2013 15:45:12 +0200 Sascha L. Teichmann Removed obsolete import. 3.0.7
Mon, 10 Jun 2013 14:56:13 +0200 Andre Heinecke Enlarge white background so that it overlays correctly as
Mon, 10 Jun 2013 14:17:09 +0200 Christian Lins Refit PDF map legend (#767).
Mon, 10 Jun 2013 14:02:32 +0200 Christian Lins Limit PDF map title length to 20 characters (#767).
Mon, 10 Jun 2013 13:43:53 +0200 Christian Lins Enhance WSPLGEN legend's class names (#767).
Mon, 10 Jun 2013 13:06:30 +0200 Andre Heinecke Add Jasper report templates for bedheight differences
Mon, 10 Jun 2013 13:06:03 +0200 Andre Heinecke Implement pdf export for bedheight differences
Mon, 10 Jun 2013 13:04:48 +0200 Andre Heinecke Add method to get name pairs of differences
Mon, 10 Jun 2013 13:04:17 +0200 Andre Heinecke Add JR datasource for Bedheight differences
Mon, 10 Jun 2013 11:50:21 +0200 Andre Heinecke Change author I'm the culprit of that class.
Mon, 10 Jun 2013 10:57:14 +0200 Andre Heinecke Fix accidental mistake in group expression of some waterlevels
Mon, 10 Jun 2013 10:54:24 +0200 Andre Heinecke Fix uesk description for issue 770
Fri, 07 Jun 2013 18:08:45 +0200 Tom Gottfried Bedheight parser: improved logging
Fri, 07 Jun 2013 17:52:10 +0200 Tom Gottfried Bedheight parser: handle whitespace in metaline
Fri, 07 Jun 2013 17:09:26 +0200 Andre Heinecke Fix export at river km's for issue1275
Fri, 07 Jun 2013 13:06:20 +0200 Andre Heinecke Call update after setting the instance
Fri, 07 Jun 2013 11:49:53 +0200 Andre Heinecke Use WikiLink class for Help links
Fri, 07 Jun 2013 11:49:03 +0200 Andre Heinecke Subclass ImgLink with a new class WikiImgLink
Fri, 07 Jun 2013 11:47:47 +0200 Andre Heinecke Add imageLinkHTML function to WikiLinks class
Thu, 06 Jun 2013 18:23:17 +0200 Andre Heinecke Fix gauge determination.
Thu, 06 Jun 2013 18:10:19 +0200 Raimund Renkert Added i18n string for wst with kind=6 used in datacage.
Thu, 06 Jun 2013 18:09:21 +0200 Raimund Renkert Fixed i18n string to have the correct unit in y axis.
Thu, 06 Jun 2013 18:08:27 +0200 Raimund Renkert Added wsts with kind=6 (delta W ls) to datacage config.
Thu, 06 Jun 2013 17:33:47 +0200 Andre Heinecke Switch default seddb to postgres and handle the configuration
Thu, 06 Jun 2013 17:29:24 +0200 Andre Heinecke Default to a non internal wiki url
Thu, 06 Jun 2013 17:31:34 +0200 Raimund Renkert I965: Set bed heights initial inactive in bed height differences chart.
Wed, 05 Jun 2013 18:53:04 +0200 Andre Heinecke Fix AT export icon and file name after a km change
Thu, 06 Jun 2013 16:56:08 +0200 Christian Lins WMSLayer now use correct OnlineResource for map requests (e.g. Omniscale OSM Service is now working), see Issue #554.
Thu, 06 Jun 2013 16:43:37 +0200 Raimund Renkert I18N strings for bed difference CSV file header.
Thu, 06 Jun 2013 16:43:02 +0200 Raimund Renkert Add CSV data facet to have a CSV file export.
Thu, 06 Jun 2013 16:42:11 +0200 Raimund Renkert Added the new bed difference exporter to config files.
Thu, 06 Jun 2013 16:41:27 +0200 Raimund Renkert Added exporter for bed height differences.
Thu, 06 Jun 2013 13:29:02 +0200 Raimund Renkert Adjusted bed height difference tab title.
Thu, 06 Jun 2013 13:28:05 +0200 Raimund Renkert I999: Epochs and single years are handled in the same way in difference calc.
Thu, 06 Jun 2013 13:26:34 +0200 Raimund Renkert I999: Filter epochs ands single years in datacage config.
Thu, 06 Jun 2013 11:20:20 +0200 Felix Wolfsteller Remove stray debug logging.
Thu, 06 Jun 2013 11:20:01 +0200 Felix Wolfsteller flys/issue863: Create gaps for middlebedheight data if distance > 110 m.
Thu, 06 Jun 2013 10:56:05 +0200 Raimund Renkert Fixed facet display name in bed height difference calculation.
Thu, 06 Jun 2013 10:55:14 +0200 Raimund Renkert I1035: Fixed calculation of multiple bed height differences.
Wed, 05 Jun 2013 18:03:21 +0200 Andre Heinecke Fix empty column logic in FixAT export
Wed, 05 Jun 2013 18:02:39 +0200 Andre Heinecke Add * in the first line of AT Exports.
Wed, 05 Jun 2013 14:44:36 +0200 Andre Heinecke Updade sq relation pdf export as specified in issue1071
Wed, 05 Jun 2013 13:18:25 +0200 Tom Gottfried merge
Wed, 05 Jun 2013 13:16:28 +0200 Tom Gottfried merged
Wed, 05 Jun 2013 12:04:11 +0200 Tom Gottfried merged
Wed, 05 Jun 2013 11:56:38 +0200 Tom Gottfried backout backout as it is now safely in a branch double-precision
Wed, 05 Jun 2013 09:36:01 +0200 Tom Gottfried Do not use file extension for description of bed heights
Fri, 24 May 2013 16:26:41 +0200 Tom Gottfried Backed out changeset 53fca3392c9f
Fri, 24 May 2013 16:03:52 +0200 Tom Gottfried Schema change and Importer: use double to prevent rounding at import time
Wed, 05 Jun 2013 13:13:20 +0200 Christian Lins CapabilitiesParse parses the "queryable" attribute of a WMSLayer now (#1253).
Wed, 05 Jun 2013 12:56:24 +0200 Christian Lins CapabilitesParser can parse map format types now (#554).
Wed, 05 Jun 2013 11:54:24 +0200 Christian Lins Fix Non-UTF8 Umlaut characters.
Wed, 05 Jun 2013 11:40:14 +0200 Felix Wolfsteller issue697: Re-add style for vertical Q main values text. Had been removed.
Tue, 04 Jun 2013 11:51:06 +0200 Felix Wolfsteller Cosmetics, TODO, doc.
Tue, 04 Jun 2013 17:57:30 +0200 Bernhard Herzog Use WikiLinks cell formatter for the wiki-links in MeasurementStationListGrid.
Tue, 04 Jun 2013 17:41:02 +0200 Bernhard Herzog Generate SSO wiki links in RiverInfoPanel instead of plain Anchors.
Tue, 04 Jun 2013 17:40:00 +0200 Bernhard Herzog Instantiate RiverInfoPanel with a FLYS reference for SSO.
Tue, 04 Jun 2013 17:38:35 +0200 Bernhard Herzog Pass the FLYS instance to the InfoPanel class.
Tue, 04 Jun 2013 17:35:21 +0200 Bernhard Herzog Use WikiLinks cell formatter for the wiki-links in GaugeListGrid.
Tue, 04 Jun 2013 17:33:55 +0200 Bernhard Herzog Add helpers for links into the Flys wiki with optional SSO support.
Tue, 04 Jun 2013 17:20:50 +0200 Bernhard Herzog Extend the shared interface User with the SAML ticket
Tue, 04 Jun 2013 17:13:50 +0200 Bernhard Herzog Store the SAML ticket in the user object after authentication.
Tue, 04 Jun 2013 16:58:49 +0200 Andre Heinecke Add an Override to the compare method
Tue, 04 Jun 2013 16:45:23 +0200 Andre Heinecke Add sorting for discharge value
Tue, 04 Jun 2013 16:07:33 +0200 Andre Heinecke Remove getUser Hack.
Tue, 04 Jun 2013 16:04:08 +0200 Andre Heinecke Simplify and fix range filtering for server data.
Tue, 04 Jun 2013 16:02:17 +0200 Andre Heinecke Accept null mode in to/fromValue
Tue, 04 Jun 2013 16:01:43 +0200 Andre Heinecke Let get return a value
Tue, 04 Jun 2013 15:17:19 +0200 Sascha L. Teichmann Datacage: Added function dc:get('var-name'). Returns content of variable var-name or NULL if not
Tue, 04 Jun 2013 13:28:31 +0200 Christian Lins i18n: German Üsg -> ÜSG
Tue, 04 Jun 2013 12:26:27 +0200 Sascha L. Teichmann Datacage: If there is an artifact you likely need the artifact database, too.
Tue, 04 Jun 2013 10:27:54 +0200 Felix Wolfsteller Remove stray semicolon from sql schema.
Mon, 03 Jun 2013 18:17:45 +0200 Andre Heinecke Fix km filtering in Datacage, we default to mode distance now
Mon, 03 Jun 2013 17:46:59 +0200 Andre Heinecke Add unit to location and translate outliertest method
Mon, 03 Jun 2013 17:32:10 +0200 Andre Heinecke Add missing localisation for pdf export tooltip in fixing analysis
Mon, 03 Jun 2013 17:16:47 +0200 Andre Heinecke Add SQRelationJRDataSource class
Mon, 03 Jun 2013 17:15:09 +0200 Andre Heinecke Implement PDF export for SQ Relation
Mon, 03 Jun 2013 16:26:10 +0200 Andre Heinecke Add Jasper report templates for sqrelation
Mon, 03 Jun 2013 14:56:10 +0200 Christian Lins createWSPLGENClassName() now respects user locale (#767).
Mon, 03 Jun 2013 14:53:08 +0200 Felix Wolfsteller issue986: i18n, include wst-unit in axis label.
Mon, 03 Jun 2013 14:52:31 +0200 Felix Wolfsteller part of issue986: axis label includes correct wst-unit.
Mon, 03 Jun 2013 14:51:57 +0200 Felix Wolfsteller cosmetics: minor indentation fix.
Mon, 03 Jun 2013 13:47:04 +0200 Felix Wolfsteller issue1225: use river name for axis i18n.
Mon, 03 Jun 2013 13:46:20 +0200 Felix Wolfsteller i18n for issue1225: river-km/$river-km .
Mon, 03 Jun 2013 11:30:18 +0200 Andre Heinecke Fix location of features.xml
Mon, 03 Jun 2013 11:25:56 +0200 Andre Heinecke Handle FEATURES_XML environment setting
Mon, 03 Jun 2013 10:23:20 +0200 Andre Heinecke Add l10n for issue1310
Mon, 03 Jun 2013 10:22:25 +0200 Andre Heinecke Use HLayout instead of VLayout.
Mon, 03 Jun 2013 10:21:58 +0200 Christian Lins Stamp border thinkness of map print PDF fitted (#767).
Mon, 03 Jun 2013 10:20:12 +0200 Andre Heinecke Prophylactic fix for DeltaWt's before 1900
Mon, 03 Jun 2013 10:01:28 +0200 Christian Lins Make legend entries of WSPLGEN map more verbose and add units (#767).
Mon, 03 Jun 2013 09:58:16 +0200 Christian Lins Increase legend scale of map print PDF (#767).
Fri, 31 May 2013 16:42:02 +0200 Andre Heinecke Fix comment for newRegularTimePeriod
Sun, 02 Jun 2013 21:57:11 +0200 Christian Lins Increase legend size of map print PDF (#767).
Sun, 02 Jun 2013 21:09:12 +0200 Christian Lins Increase map title size for map print PDF (#767).
Sun, 02 Jun 2013 18:13:29 +0200 Sascha L. Teichmann LinearInterpolated#apply(): Added simple test if the two datasets intersect at all.
Sun, 02 Jun 2013 17:52:53 +0200 Sascha L. Teichmann Waterlevel differences & bed height differences: Add new model LinearInterpolated intented to unify the two very similiar calculations. The focus of the current implementation is correctness and not speed! The fact that the data sets more mostly sorted by station is not exploited. Doing so would improve performance significantly.
Sun, 02 Jun 2013 13:51:27 +0200 Sascha L. Teichmann Bed quality calculation: Replaced another iteration over the key set + directly fetching the values withan iteration over the entry set.

http://dive4elements.wald.intevation.org