Mon, 22 Feb 2016 17:26:36 +0100 |
Sascha L. Teichmann |
Merged
|
Mon, 22 Feb 2016 17:26:11 +0100 |
Sascha L. Teichmann |
Use new XMLUtils signature when loading themes.
|
Tue, 16 Feb 2016 14:26:32 +0100 |
Tom Gottfried |
Document singularity of river axes at server start.
|
Wed, 03 Feb 2016 18:35:18 +0100 |
Tom Gottfried |
Do not use configuration EntityResolver here.
|
Mon, 28 Dec 2015 17:54:29 +0100 |
Tom Gottfried |
Added tag 3.2.1 for changeset d8e3b20e2c93
|
Mon, 28 Dec 2015 17:52:31 +0100 |
Tom Gottfried |
Add missing newline at end of file.
3.2.1
|
Thu, 24 Dec 2015 19:05:21 +0100 |
Tom Gottfried |
Entities will be resolved correctly if placeholder is given.
|
Thu, 24 Dec 2015 17:48:42 +0100 |
Tom Gottfried |
Control directory where axis mapfiles are written.
|
Tue, 22 Dec 2015 11:22:06 +0100 |
Tom Gottfried |
(Issue1856) Exclude ACC 3.1, use 3.2.2 instead.
|
Thu, 17 Dec 2015 18:34:28 +0100 |
Tom Gottfried |
Backout revision d793caaf5b5e.
|
Thu, 17 Dec 2015 18:31:26 +0100 |
Tom Gottfried |
CGI needs to be enabled in jessie.
|
Thu, 17 Dec 2015 17:07:53 +0100 |
Tom Gottfried |
Small corrections and cosmetics for install docs.
|
Wed, 16 Dec 2015 17:23:37 +0100 |
Tom Gottfried |
Update install docs.
|
Thu, 10 Dec 2015 18:25:11 +0100 |
Tom Gottfried |
createlang is deprecated and PL/pgSQL installed by default.
|
Thu, 10 Dec 2015 17:41:27 +0100 |
Tom Gottfried |
Add Dockerfile for Postgres-DB setup.
|
Thu, 10 Dec 2015 17:40:02 +0100 |
Tom Gottfried |
Improve Postgres-DB setup.
|
Thu, 10 Dec 2015 14:50:29 +0100 |
Tom Gottfried |
Added tag 3.2.0 for changeset e062d3afd682
|
Thu, 10 Dec 2015 14:41:31 +0100 |
Tom Gottfried |
Add missing newlines at end of file.
3.2.0
|
Thu, 10 Dec 2015 14:40:03 +0100 |
Tom Gottfried |
Remove unused imports.
|
Thu, 10 Dec 2015 14:38:32 +0100 |
Tom Gottfried |
Remove indirections internally.
|
Tue, 08 Dec 2015 20:44:18 +0100 |
Tom Gottfried |
Remove trailing whitespace.
|
Tue, 08 Dec 2015 20:33:07 +0100 |
Tom Gottfried |
Remove trailing whitespace in properties.
|
Tue, 08 Dec 2015 20:15:45 +0100 |
Tom Gottfried |
Issue1854: Avoid assumptions about limits of SQL datetime.
|
Tue, 08 Dec 2015 19:16:03 +0100 |
Tom Gottfried |
Remove unused or redundant imports.
|
Tue, 08 Dec 2015 18:44:41 +0100 |
Tom Gottfried |
It comes already ordered from the database.
|
Tue, 08 Dec 2015 18:10:18 +0100 |
Tom Gottfried |
Issue1854: Use the real data.
|
Tue, 08 Dec 2015 16:43:46 +0100 |
Tom Gottfried |
Add missing whitespace (syntax error).
|
Tue, 08 Dec 2015 16:03:30 +0100 |
Tom Gottfried |
Issue1854: Adapt to QualityMeasurementFactory and filter with river distance.
|
Tue, 08 Dec 2015 15:56:12 +0100 |
Tom Gottfried |
It's worth a warning.
|
Mon, 07 Dec 2015 17:03:34 +0100 |
Tom Gottfried |
Issue1854: Adapt statement to QualityMeasurementFactory
|
Thu, 03 Dec 2015 14:44:35 +0100 |
Tom Gottfried |
Issue1854: Filter BedOverview down to river distance.
|
Thu, 03 Dec 2015 12:20:03 +0100 |
Tom Gottfried |
Tidied.
|
Wed, 02 Dec 2015 20:20:03 +0100 |
Tom Gottfried |
Remove spammy debug line.
|
Wed, 02 Dec 2015 19:35:11 +0100 |
Tom Gottfried |
Tidied.
|
Tue, 24 Nov 2015 18:52:24 +0100 |
Tom Gottfried |
Add script to migrate an Oracle DB from schema 3.1.9 to 3.1.10.
|
Thu, 19 Nov 2015 19:55:12 +0100 |
Tom Gottfried |
Remove invalid public key file.
|
Fri, 28 Aug 2015 16:24:01 +0200 |
Tom Gottfried |
(issue1839) Consider more than one location in ld_locations.
|
Fri, 28 Aug 2015 12:56:53 +0200 |
Tom Gottfried |
Force clean dependency management in backend.
|
Fri, 28 Aug 2015 12:55:01 +0200 |
Tom Gottfried |
Cleanup backend dependencies.
|
Fri, 28 Aug 2015 12:44:23 +0200 |
Tom Gottfried |
Add unstated dependency.
|
Tue, 25 Aug 2015 19:52:33 +0200 |
Tom Gottfried |
Remove unused dependency.
|
Thu, 20 Aug 2015 19:14:56 +0200 |
Andre Heinecke |
issue1841 Only include loads where value != NaN in info service
|
Thu, 20 Aug 2015 14:21:54 +0200 |
Tom Gottfried |
Remove unused method.
|
Thu, 20 Aug 2015 10:56:14 +0200 |
Tom Gottfried |
Language corrections in docs.
|
Mon, 17 Aug 2015 11:06:23 +0200 |
Tom Gottfried |
(issue1838) Remove method in RiverUtils.
|
Mon, 17 Aug 2015 10:18:05 +0200 |
Tom Gottfried |
(issue1838) Get min and max directly from database.
|
Fri, 14 Aug 2015 18:24:04 +0200 |
Tom Gottfried |
Upgrade to DBCP 2.1.1
|
Thu, 13 Aug 2015 18:37:13 +0200 |
Tom Gottfried |
Clean up a few debug messages.
|
Tue, 11 Aug 2015 12:17:42 +0200 |
Sascha L. Teichmann |
Made ETL process more tolerant for dates in SGM/DIPS gauges. Upgrade to ojdbc6.jar.
|
Fri, 26 Jun 2015 19:33:17 +0200 |
Tom Gottfried |
Remove indirection via RiverUtils to obtain reference gauge and reduce casts.
|
Fri, 26 Jun 2015 18:11:27 +0200 |
Tom Gottfried |
(issue1801) Remove indirection via RiverUtils for obtaining reference gauge.
|
Fri, 26 Jun 2015 16:23:32 +0200 |
Tom Gottfried |
A duration curve is always calculated for a single location.
|
Fri, 26 Jun 2015 14:31:08 +0200 |
Tom Gottfried |
Remove further indirection in WINFOArtifact.
|
Wed, 24 Jun 2015 15:49:23 +0200 |
Andre Heinecke |
(issue1801) Code cleanups
|
Wed, 24 Jun 2015 14:07:26 +0200 |
Andre Heinecke |
(issue1801) Unify reference gauge finding code
|
Fri, 19 Jun 2015 17:42:23 +0200 |
Andre Heinecke |
Add quotes in Path tests to avoid wrong results if variables are unset
|
Fri, 19 Jun 2015 17:41:35 +0200 |
Andre Heinecke |
(issue1824) Install smartgwt from file base on SMARTGWT environment variable
|
Fri, 19 Jun 2015 17:23:35 +0200 |
Andre Heinecke |
(issue1824) Use fixed smartgwt version and add rationale for this.
|
Fri, 19 Jun 2015 17:00:32 +0200 |
Andre Heinecke |
Do not die if work dir is clean.
|
Fri, 19 Jun 2015 16:35:13 +0200 |
Andre Heinecke |
(issue1448) Make sq time intervals distinct only for non epoch loads
|
Mon, 08 Jun 2015 17:39:51 +0200 |
Andre Heinecke |
Remove unused variable and microoptimize loop variables.
|
Mon, 08 Jun 2015 16:53:54 +0200 |
Andre Heinecke |
(issue1788) Fix area split if there are no NaN's in the data
|
Fri, 05 Jun 2015 16:56:47 +0200 |
Tom Gottfried |
We expect that every river has only one RiverAxis of kind 1
|
Fri, 05 Jun 2015 16:53:07 +0200 |
Tom Gottfried |
Avoid writing defect mapfiles for layers without extent.
|
Thu, 21 May 2015 16:10:21 +0200 |
Tom Gottfried |
Remove accidentaly commited temporary debug lines.
|
Thu, 21 May 2015 13:46:37 +0200 |
Tom Gottfried |
(issue1550) Fix writing parameter -GEL to parameter file.
|
Fri, 08 May 2015 13:02:33 +0200 |
Tom Gottfried |
Install doc: update to latest changes in binary packages.
|
Thu, 07 May 2015 15:16:44 +0200 |
Tom Gottfried |
Importer-packaging: just a warning would end up with a package that really looks like VERSION.
|
Thu, 07 May 2015 09:52:56 +0200 |
Tom Gottfried |
Added tag 3.1.10 for changeset 1bc1d6969520
|
Thu, 07 May 2015 09:51:38 +0200 |
Tom Gottfried |
Release script: just a warning would end up with a package that really looks like VERSION (e.g. if -t was forgotten).
3.1.10
|
Thu, 07 May 2015 09:26:43 +0200 |
Tom Gottfried |
Release script: use newer patch build of Smart GWT.
|
Wed, 06 May 2015 18:46:57 +0200 |
Tom Gottfried |
(issue1798) Handle the case when there are no data in the diagram.
|
Wed, 06 May 2015 17:59:38 +0200 |
Tom Gottfried |
Facet-Metadata: Don't put the value into the key.
|
Wed, 06 May 2015 16:23:23 +0200 |
Tom Gottfried |
Bedheight differences PDF-export: there might be multiple differences, so place them at the bottom of the title band.
|
Wed, 06 May 2015 13:29:10 +0200 |
Tom Gottfried |
Release script: prevent gunzip from asking for overwrite.
|
Thu, 30 Apr 2015 20:02:30 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
Thu, 30 Apr 2015 19:57:45 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
Thu, 30 Apr 2015 18:13:15 +0200 |
Tom Gottfried |
(issue1754) Handle the case if no radius is given.
|
Thu, 30 Apr 2015 17:11:59 +0200 |
Andre Heinecke |
(issue1754) Remove default subtitle hack
|
Thu, 30 Apr 2015 13:06:51 +0200 |
Andre Heinecke |
(issue1754) Proper subtitle handling for Radius
|
Thu, 30 Apr 2015 13:02:37 +0200 |
Andre Heinecke |
(issue1754) Add subtitle to output for Minfo Diff's and Flow velocity
|
Wed, 29 Apr 2015 18:20:23 +0200 |
Tom Gottfried |
(issue1801) Reference gauge for waterlevel calculation depends on direction of calculation or flow direction.
|
Wed, 29 Apr 2015 18:17:53 +0200 |
Tom Gottfried |
(issue1801) Return defined gauge at limit between two gauge ranges.
|
Wed, 29 Apr 2015 16:36:29 +0200 |
Tom Gottfried |
Remove misuse of method for determining gauge for a long range.
|
Wed, 29 Apr 2015 14:13:57 +0200 |
Andre Heinecke |
(issue1754) Fix check for empty data bounds
|
Wed, 29 Apr 2015 12:30:57 +0200 |
Tom Gottfried |
(issue1801) Determine gauge at a station always with same tolerance.
|
Wed, 29 Apr 2015 11:56:04 +0200 |
Andre Heinecke |
(issue1754) Fix Radius calculation for filtered (smoothed) facets
|
Tue, 28 Apr 2015 14:22:47 +0200 |
Andre Heinecke |
(issue1754) Do not base smoothing radius on calculation range
|
Mon, 27 Apr 2015 17:35:28 +0200 |
Andre Heinecke |
(issue1754) Do not filter BedHeightSoundings to range.
|
Mon, 27 Apr 2015 15:15:44 +0200 |
Andre Heinecke |
Deduplicate code in Minfo / Wifo difference select states.
|
Mon, 27 Apr 2015 14:50:38 +0200 |
Andre Heinecke |
Deduplicate W / BedHeight Difference selection panel code
|
Mon, 27 Apr 2015 12:48:41 +0200 |
Andre Heinecke |
Backout 8716:b5ac17a10d22 Regression risk too high.
|
Mon, 27 Apr 2015 12:48:24 +0200 |
Andre Heinecke |
Backout 8709:71ae18553377 Regression risk too high.
|
Mon, 27 Apr 2015 11:45:31 +0200 |
Andre Heinecke |
(issue1754) Only create new Recommendations
|
Fri, 24 Apr 2015 18:03:46 +0200 |
Andre Heinecke |
(issue1448) There is no more need for off_epoch infos
|
Fri, 24 Apr 2015 18:01:18 +0200 |
Tom Gottfried |
(issue1602) We don't distinguish between types since sometime but we want to have metadata at the facet.
|
Fri, 24 Apr 2015 17:54:12 +0200 |
Andre Heinecke |
(issue1448) Remove obsolete code for OfficalEpoch "Calculation"
|
Fri, 24 Apr 2015 17:18:48 +0200 |
Andre Heinecke |
(issue1448) Localize SedimentLoadInfo Exceptions shown in the client
|
Fri, 24 Apr 2015 17:17:56 +0200 |
Andre Heinecke |
(issue1448) Also filter epoch values in sq_time_interval mode
|
Fri, 24 Apr 2015 15:57:49 +0200 |
Andre Heinecke |
Improve ArtifactHelper creation debug output
|
Fri, 24 Apr 2015 15:57:23 +0200 |
Andre Heinecke |
(issue1754) Also fixup master artifact for already loaded recommendations
|
Fri, 24 Apr 2015 12:45:55 +0200 |
Andre Heinecke |
Change database connection debug output to traces
|
Wed, 15 Apr 2015 17:22:02 +0200 |
Andre Heinecke |
Change some debugs to trace in theme factory
|
Fri, 24 Apr 2015 15:06:38 +0200 |
Tom Gottfried |
(issue1750) Apply schema changes to oracle, which are already done for PostgreSQL.
|
Thu, 23 Apr 2015 19:20:40 +0200 |
Tom Gottfried |
(issue1787) Globally sorting WST-columns over avg(Q)+max(Q) might give unexpected results at some kms. We thus sort locally since Rev 93a31cfb18c0.
|
Thu, 23 Apr 2015 19:13:33 +0200 |
Tom Gottfried |
(issue1787) Sort WQ data locally over Q bevor lookup of Qs for given W.
|
Thu, 23 Apr 2015 19:06:41 +0200 |
Tom Gottfried |
Avoid NPE: fixRes is null if wqkms.lenght==0.
|
Thu, 23 Apr 2015 16:42:42 +0200 |
Tom Gottfried |
Remove some superfluous debug output and obsolete outcommented code.
|
Wed, 22 Apr 2015 11:32:08 +0200 |
Tom Gottfried |
(issue1602) Use correct descriptor for sounding width y-data.
|
Mon, 20 Apr 2015 17:57:48 +0200 |
Tom Gottfried |
Remove useless line of code (thanks for the hint, SLT).
|
Mon, 20 Apr 2015 15:32:03 +0200 |
Tom Gottfried |
(issue1670) Remove parallel implementation for gaps in line themes.
|
Mon, 20 Apr 2015 15:31:12 +0200 |
Tom Gottfried |
(issue1670) Purge obsolete if-branching.
|
Mon, 20 Apr 2015 15:03:02 +0200 |
Tom Gottfried |
(issue1670) There is no point in refilling half of the gaps.
|
Mon, 20 Apr 2015 12:58:52 +0200 |
Tom Gottfried |
(issue1670) Remove 99-percent copy-paste method, which had been used only once.
|
Mon, 20 Apr 2015 12:50:00 +0200 |
Tom Gottfried |
(issue1670) We want to see gaps larger than 100 m, not 100 km.
|
Mon, 20 Apr 2015 10:23:40 +0200 |
Tom Gottfried |
(issue1750) Use new MeasuremenStation-methods to find companion station and do less checking for inconsistent data (schema or at least importer do the job now).
|
Mon, 20 Apr 2015 10:21:45 +0200 |
Tom Gottfried |
(issue1750) New methods for finding the actual location and companion station of a measurement station.
|
Fri, 17 Apr 2015 15:04:16 +0200 |
Tom Gottfried |
(issue1750) Consistently attach parameters of suspended respectively bedload material to measurement station of respective type.
|
Fri, 17 Apr 2015 14:55:42 +0200 |
Tom Gottfried |
(issue1750) There can be only one SQ-relation of a parameter for a time range (given by sq_relation_id) per station and some other attributes might be null.
|
Fri, 17 Apr 2015 14:50:08 +0200 |
Tom Gottfried |
Handle empty strings as missing values without warning when parsing SQ-relations.
|
Thu, 16 Apr 2015 18:38:19 +0200 |
Tom Gottfried |
(issue1763) Reduce code-duplication (patch by Sascha Teichmann).
|
Wed, 15 Apr 2015 18:36:11 +0200 |
Tom Gottfried |
(issue1763) Empty strings are most likely intended as missing values, so don't try to parse them (plus enhanced logging).
|
Wed, 15 Apr 2015 17:30:27 +0200 |
Tom Gottfried |
(issue1796) We don't necessarily need the river Rhine. SedDB river names are purely optional.
|
Tue, 14 Apr 2015 17:57:09 +0200 |
Tom Gottfried |
(issue1755) Remove redundant conditional checks.
|
Tue, 14 Apr 2015 17:23:15 +0200 |
Tom Gottfried |
(issue1755) The essence is that interpolation is impossible though their might be data.
|
Mon, 13 Apr 2015 11:26:44 +0200 |
Andre Heinecke |
(issue1796) Use seddb name of a river when accessing the seddb
|
Mon, 13 Apr 2015 11:24:32 +0200 |
Andre Heinecke |
(issue 1796) Scheme change! Add model for seddb_name lookup table.
|
Mon, 13 Apr 2015 11:03:00 +0200 |
Andre Heinecke |
issue1755 Prevent out of bounds access when there is no data
|
Fri, 10 Apr 2015 17:47:00 +0200 |
Tom Gottfried |
(issue1763) Fix filtering of lines when parsing bed heights.
|
Fri, 10 Apr 2015 17:42:10 +0200 |
Tom Gottfried |
(issue1763) We have UNIQUE(station, bedHeight) since Rev 2d16f4a0bdcc and comparing with the other parameters will never return any row if any of them is null.
|
Fri, 10 Apr 2015 13:26:59 +0200 |
Tom Gottfried |
Fix spelling and whitespace-cleanup in ETL-README.
|
Fri, 10 Apr 2015 11:17:03 +0200 |
Andre Heinecke |
(issue1755) Add non empty measurement facets again
|
Thu, 09 Apr 2015 19:27:54 +0200 |
Tom Gottfried |
Importer, do not jump knowingly over the cliff.
|
Thu, 09 Apr 2015 18:20:55 +0200 |
Tom Gottfried |
(issue1755) Fix i18n.
|
Thu, 09 Apr 2015 17:29:45 +0200 |
Tom Gottfried |
Mavenize importer packaging and allow packaging for specific versions and database systems.
|
Thu, 09 Apr 2015 17:08:51 +0200 |
Tom Gottfried |
(issue1763) Correct properties in importer scripts.
|
Thu, 09 Apr 2015 11:54:55 +0200 |
Tom Gottfried |
Correct usage section in release script.
|
Thu, 09 Apr 2015 11:13:45 +0200 |
Tom Gottfried |
Remove outdated contributed scripts in backend.
|
Thu, 09 Apr 2015 11:11:12 +0200 |
Tom Gottfried |
Remove outdated or useless README-files in backend.
|
Thu, 09 Apr 2015 10:52:51 +0200 |
Tom Gottfried |
Move importer configuration to a single place.
|
Thu, 09 Apr 2015 10:28:50 +0200 |
Andre Heinecke |
(issue1755) Some spelling fixes for problems in bedquality calc
|
Thu, 09 Apr 2015 10:27:00 +0200 |
Andre Heinecke |
(issue1755) Add Problem also if a result is not interpolateable
|
Wed, 08 Apr 2015 19:09:38 +0200 |
Andre Heinecke |
(issue1755) Only add facets / results when they do not consist exlcusively of NaN values.
|
Wed, 08 Apr 2015 18:15:55 +0200 |
Tom Gottfried |
(issue1763) Use more distinct constraint names and adapt drop-script.
|
Wed, 08 Apr 2015 14:47:30 +0200 |
Tom Gottfried |
Move static measurement types to their natural home.
|
Tue, 07 Apr 2015 16:35:11 +0200 |
Tom Gottfried |
(issue1787) Do not accept any non-NaN W-value but check for epsilon.
|
Tue, 07 Apr 2015 12:10:45 +0200 |
Tom Gottfried |
Sorting rows is a prerequisite.
|
Tue, 07 Apr 2015 11:20:36 +0200 |
Tom Gottfried |
Use EpsilonComparator instead of redundant implementation.
|
Thu, 02 Apr 2015 18:37:26 +0200 |
Andre Heinecke |
(issue1755) Fix typo in theme mapping for porosity sublayer
|
Thu, 02 Apr 2015 18:22:01 +0200 |
Andre Heinecke |
(issue1755) Do not add empty data facets in BedQuality State
|
Thu, 02 Apr 2015 17:40:18 +0200 |
Andre Heinecke |
(issue1803) Use MD5 instead of a homegrown hashing algorithm
|
Thu, 02 Apr 2015 17:17:51 +0200 |
Tom Gottfried |
Whitespace-cleanup schema files.
|
Thu, 02 Apr 2015 15:48:48 +0200 |
Andre Heinecke |
(issue1755) Add problem / report handling to BedQualityCalculation
|
Thu, 02 Apr 2015 14:10:25 +0200 |
Andre Heinecke |
(issue1755) Uppercase diameter names in CSV Header
|
Thu, 02 Apr 2015 14:09:27 +0200 |
Andre Heinecke |
(issue1755) Fix Y Axis label in Bed Quality facets. It's used in the CSV Export.
|
Thu, 02 Apr 2015 14:06:56 +0200 |
Andre Heinecke |
(issue1755) Fix typo that filtered out porosity.sublayer facets
|
Wed, 01 Apr 2015 17:10:03 +0200 |
Andre Heinecke |
(issue1755) Do not create interpolated themes and disable export of non interpolatable data.
|
Wed, 01 Apr 2015 13:11:30 +0200 |
Tom Gottfried |
User smarter new interface from RangeAccess.
|
Tue, 31 Mar 2015 17:28:27 +0200 |
Andre Heinecke |
Improve coding style in KMFilter loops
|
Tue, 31 Mar 2015 17:27:20 +0200 |
Andre Heinecke |
(issue1754) Do not switch W and Km data when Range filtering WKms
|
Tue, 31 Mar 2015 15:16:12 +0200 |
Andre Heinecke |
(issue1754) Increase m index after adding an interpolated result.
|
Mon, 30 Mar 2015 19:29:31 +0200 |
Andre Heinecke |
(issue1754) Handle a>b in static BedHeight facets.
|
Mon, 30 Mar 2015 19:28:41 +0200 |
Andre Heinecke |
(issue1754) Simplify code to handle a>b cases.
|
Mon, 30 Mar 2015 19:27:11 +0200 |
Andre Heinecke |
(issue1754) Extend RangeAccess to simplyfiy range access where it is assumed that from < to
|
Mon, 30 Mar 2015 19:11:35 +0200 |
Andre Heinecke |
Remove obsolete code.
|
Fri, 27 Mar 2015 19:10:02 +0100 |
Andre Heinecke |
Remove JavaScript greeting exception.
|
Fri, 27 Mar 2015 18:59:27 +0100 |
Andre Heinecke |
(issue1754) Handle inverted presentation in BedDifference exporter
|
Fri, 27 Mar 2015 18:54:03 +0100 |
Tom Gottfried |
Enforce strings we rely on.
|
Fri, 27 Mar 2015 17:42:27 +0100 |
Tom Gottfried |
SCHEMA CHANGE: Remove unnecessary direct relation of sq_relation with rivers.
|
Fri, 27 Mar 2015 17:27:08 +0100 |
Andre Heinecke |
(issue1755) Do not print empty rows for empty results in bedquality export
|
Fri, 27 Mar 2015 17:26:34 +0100 |
Andre Heinecke |
(issue1755) Fix check for valid date range.
|
Fri, 27 Mar 2015 17:25:30 +0100 |
Andre Heinecke |
(issue1755) Do not treat empty values as part of the result
|
Fri, 27 Mar 2015 16:55:58 +0100 |
Andre Heinecke |
(issue1755) Validate selected periods and ranges.
|
Fri, 27 Mar 2015 16:54:56 +0100 |
Andre Heinecke |
(issue1755) Extend validation to allow localized error messages.
|
Fri, 27 Mar 2015 14:39:01 +0100 |
Andre Heinecke |
Do not show lines if showlines is not set.
|
Fri, 27 Mar 2015 13:40:25 +0100 |
Andre Heinecke |
(issue1753) Fix theme for SQ Outliers and SQ Measurements
|
Thu, 26 Mar 2015 18:21:18 +0100 |
Andre Heinecke |
(issue1754) Unify PDF and CSV export and invert presentation if start > end
|
Thu, 26 Mar 2015 17:33:55 +0100 |
Andre Heinecke |
(issue1608) Determine field type with the first non empty element
|
Thu, 26 Mar 2015 17:11:36 +0100 |
Tom Gottfried |
SQ relation CSV export: order info lines according to columns plus whitespace cosmetics.
|
Thu, 26 Mar 2015 12:11:49 +0100 |
Andre Heinecke |
(issue1753) Fix number format for S
|
Thu, 26 Mar 2015 12:07:43 +0100 |
Andre Heinecke |
Handle the case where the period panel is used in a state without start and end
|
Thu, 26 Mar 2015 12:06:47 +0100 |
Andre Heinecke |
(issue1753) Fix CSV metadata explanation fields for Mesurement data
|
Thu, 26 Mar 2015 11:53:41 +0100 |
Andre Heinecke |
Add default value handling in MultiPeriodPanel
|
Thu, 26 Mar 2015 11:52:05 +0100 |
Andre Heinecke |
Cleanups
|
Thu, 26 Mar 2015 11:51:47 +0100 |
Andre Heinecke |
Add default value to BedQuality period selection
|
Thu, 26 Mar 2015 11:46:03 +0100 |
Andre Heinecke |
Fix unit displayed in WFree calculation
|
Thu, 26 Mar 2015 11:06:48 +0100 |
Andre Heinecke |
Actually check if there are no items instead of no data.
|
Thu, 26 Mar 2015 11:06:13 +0100 |
Andre Heinecke |
Handle surprising filter behaivor of *Overviews. Don't create items for unavailable data.
|
Wed, 25 Mar 2015 19:37:44 +0100 |
Andre Heinecke |
Fix handling of multiple entries in SQPeriodSelect default start/end calculation
|
Wed, 25 Mar 2015 19:20:13 +0100 |
Andre Heinecke |
Send default values for SQ Period selection to the client.
|
Wed, 25 Mar 2015 19:18:43 +0100 |
Andre Heinecke |
Try to find "default" data items for start and end in period panel
|
Wed, 25 Mar 2015 18:23:22 +0100 |
Andre Heinecke |
Remove another obsolete check for an unused (and removed) config value
|
Wed, 25 Mar 2015 18:22:34 +0100 |
Andre Heinecke |
Remove duplicated code.
|
Wed, 25 Mar 2015 18:12:16 +0100 |
Andre Heinecke |
Clean up bad code from 8614:e7a2234e7c3f
|
Wed, 25 Mar 2015 11:41:36 +0100 |
Andre Heinecke |
(issue1755) Clarify how default mecahnism works and remove unused config value.
|
Wed, 25 Mar 2015 11:25:28 +0100 |
Andre Heinecke |
(issue1608) Export appropiate data for different result types
|
Tue, 24 Mar 2015 18:17:23 +0100 |
Andre Heinecke |
(issue1755) Add good defaults for bedquality distance selection
|
Tue, 24 Mar 2015 15:22:16 +0100 |
Andre Heinecke |
(issue869) Add spacer for multiline items
|
Tue, 24 Mar 2015 11:57:23 +0100 |
Andre Heinecke |
(issue1799) Strip whitespace from river names
|
Tue, 24 Mar 2015 11:08:39 +0100 |
Andre Heinecke |
(issue1754) Allow ranges where start > end also for beddifferences.
|
Tue, 24 Mar 2015 11:06:47 +0100 |
Andre Heinecke |
(issue1754) Better fix for radius calculation then 8607:2010da0904b7
|
Tue, 24 Mar 2015 10:52:23 +0100 |
Andre Heinecke |
(issue1754) Check if start > end and handle this
|
Tue, 24 Mar 2015 10:50:46 +0100 |
Andre Heinecke |
(issue1754) Fix radius caluculation inf CurveFilter if Start > End
|
Fri, 20 Mar 2015 18:58:38 +0100 |
Andre Heinecke |
(issue1753) Align data columns to the right side.
|
Fri, 20 Mar 2015 18:42:00 +0100 |
Andre Heinecke |
(issue1750) Fix id handling with oracle
|
Fri, 20 Mar 2015 17:31:06 +0100 |
Andre Heinecke |
(issue1750) Check for stations according to measurement station range logic
|
Fri, 20 Mar 2015 16:36:37 +0100 |
Andre Heinecke |
(issue1753) Increase widht of PARAMETER column
|
Fri, 20 Mar 2015 16:32:44 +0100 |
Andre Heinecke |
(issue1753) Use epsilon comparator to compare range km's
|
Fri, 20 Mar 2015 15:20:32 +0100 |
Andre Heinecke |
Lowercase additional call to createPropertyUi
|
Fri, 20 Mar 2015 15:04:25 +0100 |
Andre Heinecke |
(issue1753) Fix editing the point color (not Color) of SQThemes.
|
Fri, 20 Mar 2015 14:31:14 +0100 |
Andre Heinecke |
(issue1051) Show offending value in year format error
|
Thu, 19 Mar 2015 16:50:24 +0100 |
Andre Heinecke |
(issue1051) Fix recommended official epochs for period mode
|
Thu, 19 Mar 2015 16:28:40 +0100 |
Andre Heinecke |
(issue1051) Validate epochs before adding them to the list
|
Thu, 19 Mar 2015 15:15:55 +0100 |
Andre Heinecke |
(issue1755) Filter out NaN values before creating the interplation function
|
Thu, 19 Mar 2015 14:21:39 +0100 |
Andre Heinecke |
(issue1755) Fix export order of multiple result columns
|
Thu, 19 Mar 2015 14:03:47 +0100 |
Andre Heinecke |
(issue1755) Fix filtering of BedQuality user facets
|
Thu, 19 Mar 2015 13:49:13 +0100 |
Andre Heinecke |
Don't warn for defined behavior.
|
Thu, 19 Mar 2015 13:36:38 +0100 |
Andre Heinecke |
(issue1755) Add interpolated facets and update themes accordingly
|
Thu, 19 Mar 2015 10:38:12 +0100 |
Andre Heinecke |
Don't die if only one year is selected for SedimentLoad calculation
|
Wed, 18 Mar 2015 18:59:17 +0100 |
Andre Heinecke |
Remove obsolete class
|
Wed, 18 Mar 2015 18:48:26 +0100 |
Andre Heinecke |
Remove additionally uneccessary file.
|
Wed, 18 Mar 2015 18:47:07 +0100 |
Andre Heinecke |
Remove unecessary imports
|
Wed, 18 Mar 2015 18:42:08 +0100 |
Andre Heinecke |
(issue1755) Generalise BedQuality result handling
|
Tue, 17 Mar 2015 18:52:00 +0100 |
Andre Heinecke |
(issue1599) Fix ManualPoints axis for bedheight_middle outputs.
|
Tue, 17 Mar 2015 16:37:17 +0100 |
Andre Heinecke |
Reduce duplicated functions to obtain layer descritpions for bedquality
|
Mon, 16 Mar 2015 17:38:08 +0100 |
Andre Heinecke |
(issue1754) Add range to W / Bed difference export.
|
Mon, 16 Mar 2015 17:08:04 +0100 |
Andre Heinecke |
Add jasper -> jrxml converted files.
|
Mon, 16 Mar 2015 16:59:37 +0100 |
Tom Gottfried |
Update SQL-statements to schema-changes in rev 6d8d7425a6b5.
|
Mon, 16 Mar 2015 15:36:38 +0100 |
Andre Heinecke |
(issue1755) Interpolate BedQuality Results
|
Mon, 16 Mar 2015 14:37:30 +0100 |
Andre Heinecke |
(issue1753) Format S with only up to three fractional digits
|
Mon, 16 Mar 2015 14:32:45 +0100 |
Andre Heinecke |
(issue1753) Add english measurements jasper template
|
Mon, 16 Mar 2015 11:35:19 +0100 |
Andre Heinecke |
(issue1753) Implement PDF export of SQ Measurement data.
|
Mon, 16 Mar 2015 10:00:39 +0100 |
Andre Heinecke |
(issue1753) Use different theme for measurements overview and single diagrams
|
Wed, 11 Mar 2015 17:44:27 +0100 |
Andre Heinecke |
Renable access to seddb sessions
|
Tue, 10 Mar 2015 17:01:42 +0100 |
Andre Heinecke |
Merge of MINFO improvement developments
|
Fri, 06 Mar 2015 12:26:12 +0100 |
Tom Gottfried |
There seems to be no use case for not overriding these methods.
|
Fri, 06 Mar 2015 11:21:36 +0100 |
Tom Gottfried |
The bug that motivated this extremely defensive error-handling was fixed in Rev fe7e9da6312a by nomore calling close() on a private variable.
|
Fri, 06 Mar 2015 10:57:56 +0100 |
Tom Gottfried |
Remove superfluous private variable.
|
Fri, 27 Feb 2015 19:07:25 +0100 |
Andre Heinecke |
(issue1798) Adjust WinCM according to W in NHN axis on explicit zoom
|
Thu, 26 Feb 2015 15:53:28 +0100 |
Andre Heinecke |
Do not get any wst values just to get the name of the differences for export.
|
Thu, 26 Feb 2015 15:52:04 +0100 |
Andre Heinecke |
Readd StaticWQKmsCacheKey and use it again.
|
Thu, 26 Feb 2015 15:37:03 +0100 |
Tom Gottfried |
Use updated class name instead of no more existant.
|
Tue, 24 Feb 2015 18:32:18 +0100 |
Andre Heinecke |
(issue1797) Increase session debug output
|
Tue, 24 Feb 2015 17:16:14 +0100 |
Andre Heinecke |
(issue1797) Move close into session release and guard it.
|
Tue, 17 Feb 2015 13:58:23 +0100 |
Andre Heinecke |
Replace offensive comment by a more constructive note.
|
Mon, 16 Feb 2015 18:03:09 +0100 |
Andre Heinecke |
(Issue1755) Add distance step selection to bed quality artifact
|
Mon, 16 Feb 2015 17:09:14 +0100 |
Andre Heinecke |
Move static operation out of loop.
|
Mon, 16 Feb 2015 15:58:52 +0100 |
Andre Heinecke |
(issue1755) Move KM Step handling from Winfo artifact to RangeAccess
|
Mon, 16 Feb 2015 12:12:12 +0100 |
Tom Gottfried |
Accept more elevation system names (e.g. with hyphen).
|
Mon, 16 Feb 2015 11:48:05 +0100 |
Tom Gottfried |
Meta-data on sounding width associated to bed heights is redundant to real data associated to values.
|
Mon, 16 Feb 2015 11:08:33 +0100 |
Tom Gottfried |
Bed heights are just bed heights since a while ('single' is obsolete).
|
Mon, 16 Feb 2015 10:12:12 +0100 |
Tom Gottfried |
Remove obsolete class hierarchy for bed height data.
|
Mon, 16 Feb 2015 09:50:39 +0100 |
Tom Gottfried |
Abstract parser for bed heights is obsolete.
|
Mon, 16 Feb 2015 09:35:06 +0100 |
Tom Gottfried |
Importer: Remove obsolete interface for bed heights.
|
Mon, 16 Feb 2015 09:21:49 +0100 |
Tom Gottfried |
Remove obsolete interface for bed height values.
|
Mon, 16 Feb 2015 09:00:08 +0100 |
Tom Gottfried |
Morphological width imported and stored with heights is redundant to table morphologic_width.
|
Mon, 16 Feb 2015 08:39:06 +0100 |
Tom Gottfried |
bed height differences datacage: only supply differences where subtrahend is older than minuend or year is unknown.
|
Mon, 16 Feb 2015 15:31:17 +0100 |
Andre Heinecke |
(issue1754) Add km filtering for winfo anf fixanal results in difference calculations
|
Mon, 16 Feb 2015 15:30:22 +0100 |
Andre Heinecke |
Actually configure a bedheight cache.
|
Mon, 16 Feb 2015 15:28:51 +0100 |
Andre Heinecke |
(issue1754) Fix wst static cache name.
|
Mon, 16 Feb 2015 15:28:22 +0100 |
Andre Heinecke |
(issue1754) Extend WKms interface for KM filtering
|
Mon, 16 Feb 2015 15:27:39 +0100 |
Andre Heinecke |
(issue1754) Gracefully handle empty differenc results (e.g from km 0,001 to 0,002)
|
Mon, 16 Feb 2015 12:55:38 +0100 |
Andre Heinecke |
(issue1754) Add distantce handling to WINFO differences state
|
Mon, 16 Feb 2015 11:30:27 +0100 |
Andre Heinecke |
Warn for not implemented difference handling of minfo artifacts.
|
Fri, 13 Feb 2015 16:36:52 +0100 |
Andre Heinecke |
(issue1750) It is an error if there are more then two stations at the same range.
|
Fri, 13 Feb 2015 16:17:46 +0100 |
Andre Heinecke |
(Issue1754) Make BedDifference calculation range dependent.
|
Fri, 13 Feb 2015 14:59:16 +0100 |
Andre Heinecke |
(issue1750) Take Static SQ Relations based on a range and merge them together
|
Fri, 13 Feb 2015 13:44:52 +0100 |
Andre Heinecke |
(issue1753) Remove "measured" from CSV header
|
Fri, 13 Feb 2015 12:35:18 +0100 |
Andre Heinecke |
(issue1753) Add measurements to CSV export
|
Fri, 13 Feb 2015 12:34:38 +0100 |
Andre Heinecke |
(issue1753) Add SQ Measurement dates as text annotations to points
|
Fri, 13 Feb 2015 12:34:06 +0100 |
Andre Heinecke |
(issue1753) Carry measurement date through SQ values
|
Fri, 13 Feb 2015 12:31:59 +0100 |
Andre Heinecke |
(issue1753) Add label theme for SQMeasurements
|
Fri, 13 Feb 2015 11:10:19 +0100 |
Andre Heinecke |
Log the server startup to stdout
|
Thu, 12 Feb 2015 17:29:33 +0100 |
Andre Heinecke |
(issue1599) Add manualpoints theme for MSH
|
Thu, 12 Feb 2015 12:18:47 +0100 |
Andre Heinecke |
(issue1068) Add different theme for SQOutlier curves and increase SQCurve linesize to 2
|
Thu, 12 Feb 2015 11:40:08 +0100 |
Andre Heinecke |
(issue1786) Enable manualline facets for cross section charts
|
Thu, 12 Feb 2015 11:17:46 +0100 |
Andre Heinecke |
(issue869) Remove horizontal lines in parameters
|
Wed, 11 Feb 2015 18:00:48 +0100 |
Andre Heinecke |
(issue1051) Use a list of single years in SedimentLoadYear mode
|
Wed, 11 Feb 2015 12:41:51 +0100 |
Andre Heinecke |
(issue1051) Add input support for epochs
|
Wed, 18 Feb 2015 17:17:20 +0100 |
Andre Heinecke |
(issue1788) Do not divide area by two.
|
Wed, 18 Feb 2015 16:57:58 +0100 |
Tom Gottfried |
(issue1717) Use unified description for y-field in editor for manual points in historical discharge time-diagrams.
|
Tue, 17 Feb 2015 16:17:31 +0100 |
Andre Heinecke |
(issue1795) Handle modules configuration for any module
|
Tue, 17 Feb 2015 12:36:13 +0100 |
Andre Heinecke |
(issue1794) Safeguard against layers without extent.
|
Fri, 30 Jan 2015 15:21:35 +0100 |
Andre Heinecke |
Update uuid of "Rhein"
|
Fri, 16 Jan 2015 18:35:35 +0100 |
Andre Heinecke |
(issue1777) Move logging code for existing tickets to the correct location
|
Mon, 12 Jan 2015 17:57:20 +0100 |
Tom Gottfried |
Remove useless i18n that cannot be called from server anyhow.
|
Fri, 19 Dec 2014 20:50:29 +0100 |
Tom Gottfried |
Release script: build binaries for publication when tagging and slightly mavenize the whole process.
|
Fri, 19 Dec 2014 19:32:05 +0100 |
Tom Gottfried |
Useful default for path to DEMs.
|
Fri, 19 Dec 2014 16:35:06 +0100 |
Tom Gottfried |
It's useful to have an uncompressed tar to which more files can be appended.
|
Fri, 19 Dec 2014 16:34:12 +0100 |
Tom Gottfried |
We don't need the base directory in the assembly.
|
Fri, 19 Dec 2014 15:24:43 +0100 |
Tom Gottfried |
Let overview be the first tab in SQ relation output.
|
Thu, 18 Dec 2014 16:12:01 +0100 |
Tom Gottfried |
On error log error.
|
Thu, 18 Dec 2014 15:45:17 +0100 |
Tom Gottfried |
Set useful default for mapserver-URLs.
|
Thu, 18 Dec 2014 11:20:51 +0100 |
Tom Gottfried |
Exclude transitive dependency because of conflicting version which breaks charting.
|
Wed, 17 Dec 2014 18:02:27 +0100 |
Tom Gottfried |
Update Oracle-POM in backend and add pom-oracle.xml with respective dependency to artifacts.
|
Wed, 17 Dec 2014 16:16:02 +0100 |
Tom Gottfried |
Configure standalone binary assembly.
|
Wed, 17 Dec 2014 15:56:41 +0100 |
Tom Gottfried |
Use Maven instead of potentially outdated JARs for creation of h2-databases. TODO: adapt release script.
|
Wed, 17 Dec 2014 10:50:35 +0100 |
Tom Gottfried |
OpenLayers download moved to github.
|
Tue, 16 Dec 2014 17:54:55 +0100 |
Tom Gottfried |
Put artifact server run-script in it's final place.
|
Tue, 16 Dec 2014 17:47:21 +0100 |
Tom Gottfried |
ETL: Upgrade PostgreSQL dependency to same version as river-backend.
|
Tue, 16 Dec 2014 15:58:33 +0100 |
Andre Heinecke |
(issue1782) Invert artifact range if necessary in officiallinefinder
|
Tue, 16 Dec 2014 15:40:00 +0100 |
Andre Heinecke |
(issue1782) Invert KM filter if from is larger then to
|
Tue, 16 Dec 2014 15:29:44 +0100 |
Andre Heinecke |
(issue1782) Select index based on km for step generation
|
Tue, 16 Dec 2014 14:27:13 +0100 |
Andre Heinecke |
(issue1777) Evaluate CLIENT_CONF environment variable
|
Tue, 16 Dec 2014 14:16:10 +0100 |
Andre Heinecke |
(issue1777) Add options to change login redirect and disable login
|
Tue, 16 Dec 2014 12:48:25 +0100 |
Andre Heinecke |
(issue1777) Log saml logins also as info without username.
|
Tue, 16 Dec 2014 12:47:46 +0100 |
Andre Heinecke |
(issue1777) Hide logout button if it is configured.
|
Tue, 16 Dec 2014 13:29:38 +0100 |
Tom Gottfried |
Whitespace-cleanup in XML-files.
|
Mon, 15 Dec 2014 19:30:10 +0100 |
Tom Gottfried |
Release script: remove installation specific defaults and give the possibility to overwrite any config-file in WEB-INF.
|
Mon, 15 Dec 2014 19:27:04 +0100 |
Tom Gottfried |
The used patch build of SmartGWT is not available anymore.
|
Mon, 15 Dec 2014 19:25:02 +0100 |
Tom Gottfried |
Release script: use trusted connections to repositories.
|
Mon, 15 Dec 2014 17:22:16 +0100 |
Tom Gottfried |
Remove obsolete Wiki-URL config in client.
|
Mon, 15 Dec 2014 16:40:21 +0100 |
Tom Gottfried |
The base-URL comes from elsewhere. Other *.properties-files know that already.
|
Fri, 12 Dec 2014 11:11:26 +0100 |
Tom Gottfried |
Do not filter tables without end date in recommendations for historical discharge tables.
|
Thu, 04 Dec 2014 18:15:05 +0100 |
Tom Gottfried |
Artifact-server config in release script: remove installation specific defaults and give the possibility to overwrite any config-file.
|
Thu, 04 Dec 2014 13:00:23 +0100 |
Tom Gottfried |
Do not give Oracle-JARs with hardcoded personal path in release script.
|
Thu, 04 Dec 2014 11:38:18 +0100 |
Tom Gottfried |
Correct header for release script.
|
Tue, 02 Dec 2014 17:58:45 +0100 |
Tom Gottfried |
Added tag 3.1.9 for changeset 7bc675e4e6e0
|
Tue, 02 Dec 2014 17:54:15 +0100 |
Sascha L. Teichmann |
Remove trailing whitespace.
3.1.9
|
Tue, 02 Dec 2014 17:51:56 +0100 |
Sascha L. Teichmann |
Removed obsolete imports.
|
Tue, 02 Dec 2014 15:25:34 +0100 |
Tom Gottfried |
Time series chart: bounds cannot allways be assumed to be given.
|
Tue, 02 Dec 2014 15:23:01 +0100 |
Tom Gottfried |
Do not flood log with details about all facets.
|
Tue, 02 Dec 2014 12:59:52 +0100 |
Tom Gottfried |
Datacage config: Oracle has no boolean data type and thus can not handle such CASE-statement in WHERE-clause.
|
Tue, 02 Dec 2014 12:03:50 +0100 |
Tom Gottfried |
Remove non-existant artifact from config.
|
Fri, 28 Nov 2014 16:34:40 +0100 |
Tom Gottfried |
Make maxWait configurable and wait for 30 seconds
|
Fri, 28 Nov 2014 10:21:40 +0100 |
Tom Gottfried |
maxWait should be set independendly of validationQuery.
|
Thu, 27 Nov 2014 20:25:31 +0100 |
Tom Gottfried |
Use validation queries for release.
|
Thu, 27 Nov 2014 20:15:38 +0100 |
Tom Gottfried |
Use explicit query to avoid hibernate connection leak.
|
Thu, 27 Nov 2014 19:55:55 +0100 |
Tom Gottfried |
Connection pool: do not wait forever for new connections and be more verbose.
|
Thu, 27 Nov 2014 19:14:05 +0100 |
Tom Gottfried |
Upgrade hibernate.
|
Thu, 27 Nov 2014 19:10:45 +0100 |
Tom Gottfried |
Add missing annotation.
|
Thu, 27 Nov 2014 17:46:37 +0100 |
Tom Gottfried |
Use RiverAccess instead of RiverUtils.
|
Thu, 27 Nov 2014 17:09:19 +0100 |
Tom Gottfried |
We depend on PostreSQL >= 9.1 at least since rev 598e4bec920b (because of CTE).
|
Wed, 26 Nov 2014 14:56:20 +0100 |
Tom Gottfried |
Use portable validation queries.
|
Wed, 26 Nov 2014 14:40:18 +0100 |
Tom Gottfried |
The used patch build of SmartGWT is not available anymore.
|
Tue, 25 Nov 2014 14:06:05 +0100 |
Andre Heinecke |
Add validation-query to example configuration.
|
Thu, 20 Nov 2014 11:27:10 +0100 |
Tom Gottfried |
Datacage: order WSTs according to column numbers in import files.
|
Tue, 18 Nov 2014 15:24:40 +0100 |
Andre Heinecke |
(issue1772) Use 0.001km tolarance instead of 0.1 to find matching km.
|
Thu, 13 Nov 2014 13:28:45 +0100 |
Tom Gottfried |
Remove obsolete lines from drop script.
|
Wed, 12 Nov 2014 13:31:53 +0100 |
Sascha L. Teichmann |
Added a validation SQL query to database backends.
|
Thu, 06 Nov 2014 15:16:37 +0100 |
Tom Gottfried |
Remove docs for specific system.
|
Wed, 05 Nov 2014 19:07:49 +0100 |
Tom Gottfried |
Cross section navigation: behave equally, regardless of whether an input value is below or above the range of possible values.
|
Wed, 05 Nov 2014 15:44:04 +0100 |
Andre Heinecke |
(issue1767) Fix lookup of closest value.
|
Wed, 05 Nov 2014 13:04:53 +0100 |
Tom Gottfried |
Gauge locations are obsolete since a long time.
|
Tue, 04 Nov 2014 17:09:04 +0100 |
Andre Heinecke |
(issue1767) Fix closet next value selection.
|
Tue, 04 Nov 2014 15:32:56 +0100 |
Tom Gottfried |
Add possibility to pack install-script in release tarball.
|
Thu, 30 Oct 2014 17:49:43 +0100 |
Tom Gottfried |
Remove no more existant processor from config.
|
Thu, 30 Oct 2014 15:03:55 +0100 |
Tom Gottfried |
Remove obsolete historical discharge curve implementations.
|
Thu, 30 Oct 2014 14:20:28 +0100 |
Tom Gottfried |
Load discharge curves via recommendations in historical discharge calculation. ToDo: Remove the other logic to load them.
|
Thu, 30 Oct 2014 14:17:49 +0100 |
Tom Gottfried |
Accept number as argument in dc:date-format().
|
Thu, 30 Oct 2014 14:10:41 +0100 |
Tom Gottfried |
Unify wording and spelling for axis fixation in chart properties editor.
|
Thu, 30 Oct 2014 11:03:19 +0100 |
Tom Gottfried |
Remove obsolete setting of start date.
|
Thu, 30 Oct 2014 10:33:16 +0100 |
Andre Heinecke |
(issue1764) Use datepicker with text field
|
Wed, 29 Oct 2014 19:52:06 +0100 |
Andre Heinecke |
Improve error handling.
|
Wed, 29 Oct 2014 19:51:39 +0100 |
Andre Heinecke |
(issue1764) Set upper-time and lower-time for time series axes
|
Wed, 29 Oct 2014 19:49:18 +0100 |
Andre Heinecke |
(issue1764) Handle date ranges in chart properties editor
|
Wed, 29 Oct 2014 16:02:37 +0100 |
Tom Gottfried |
Recognize the 'no-data value' of fromkm and tokm in datacage statement for discharge curves.
|
Tue, 28 Oct 2014 18:52:35 +0100 |
Andre Heinecke |
(issue1732) When duplication wsplgen artificats fix shapefile layers
|
Tue, 28 Oct 2014 16:10:42 +0100 |
Andre Heinecke |
(issue1733) Use rangeaccess to access range information in location select
|
Tue, 28 Oct 2014 11:31:33 +0100 |
Tom Gottfried |
The used patch build of SmartGWT is not available anymore. The newer was used for the 3.1.8 release already.
|
Mon, 27 Oct 2014 17:00:40 +0100 |
Andre Heinecke |
(issue1733) Fix locationdistancepanel
|
Mon, 27 Oct 2014 12:52:00 +0100 |
Andre Heinecke |
(issue1733) Fix switch between location and distance
|
Mon, 27 Oct 2014 12:38:22 +0100 |
Andre Heinecke |
(issue1733) Remove weird and broken code (fixes tab selection)
|
Mon, 27 Oct 2014 12:32:04 +0100 |
Andre Heinecke |
(issue1733) Clearly set location distance defaults
|
Fri, 24 Oct 2014 16:31:22 +0200 |
Andre Heinecke |
(issue1769) Adapt release script for new print url.
|
Fri, 24 Oct 2014 11:54:30 +0200 |
Tom Gottfried |
In case to equals from, and only in this case, there should be only one class. Then we have to set an arbitrary value > 0 for step because the user is allowed to give step=0.
|
Wed, 22 Oct 2014 17:33:43 +0200 |
Andre Heinecke |
(issue1762) Use getValue to obtain dateRange values
|
Tue, 21 Oct 2014 12:14:39 +0200 |
Tom Gottfried |
Do not transform Q values from cm to m.
|
Mon, 20 Oct 2014 18:26:15 +0200 |
Tom Gottfried |
Added tag 3.1.8 for changeset 7cb55659646d
|
Mon, 20 Oct 2014 18:22:07 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
3.1.8
|
Mon, 20 Oct 2014 18:15:44 +0200 |
Tom Gottfried |
Avoid encoding problem with NaN in bed difference export.
|
Mon, 20 Oct 2014 16:13:26 +0200 |
Tom Gottfried |
Adapt PDF-export to new columns in bed differences result.
|
Mon, 20 Oct 2014 14:22:51 +0200 |
Tom Gottfried |
Mention gauge name in theme name for historical discharge curves.
|
Mon, 20 Oct 2014 13:52:15 +0200 |
Tom Gottfried |
More cleanup in discharge data processing.
|
Mon, 20 Oct 2014 13:48:51 +0200 |
Tom Gottfried |
Unify descriptions of model discharge curve at gauge.
|
Mon, 20 Oct 2014 12:23:11 +0200 |
Tom Gottfried |
For fixation analysis, allow loading discharge curves from multiple gauges on calculation range via datacage.
|
Fri, 17 Oct 2014 19:21:45 +0200 |
Tom Gottfried |
Antiprogramming (in german: 'Softwareabwicklung')
|
Fri, 17 Oct 2014 19:13:40 +0200 |
Tom Gottfried |
i18n cleanup.
|
Fri, 17 Oct 2014 18:20:33 +0200 |
Tom Gottfried |
Load sounding width via recommendations for bed height differences and cleanup and fix related bed height macros.
|
Fri, 17 Oct 2014 17:39:34 +0200 |
Tom Gottfried |
Remove obsolete class.
|
Fri, 17 Oct 2014 17:29:30 +0200 |
Raimund Renkert |
Do not add a sounding width facet for bed height differences.
|
Fri, 17 Oct 2014 17:21:40 +0200 |
Raimund Renkert |
fixed bed difference export.
|
Fri, 17 Oct 2014 17:05:59 +0200 |
Tom Gottfried |
There might be no sounding width given at some stations of a bed height single.
|
Fri, 17 Oct 2014 16:08:25 +0200 |
Sascha L. Teichmann |
Removed obsolete import.
|
Fri, 17 Oct 2014 16:06:37 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
Fri, 17 Oct 2014 16:05:27 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
Fri, 17 Oct 2014 13:34:47 +0200 |
Raimund Renkert |
Added i18n strings for sounding width and data gap.
|
Fri, 17 Oct 2014 13:34:08 +0200 |
Raimund Renkert |
Bedheight differences exports sounding width and data gap for minuend and subtrahend.
|
Fri, 17 Oct 2014 13:17:12 +0200 |
Sascha L. Teichmann |
Only draw discharge curve if on same station as navigation.
|
Fri, 17 Oct 2014 12:50:35 +0200 |
Sascha L. Teichmann |
Removed morpho width from bed height diffs.
|
Fri, 17 Oct 2014 11:44:01 +0200 |
Tom Gottfried |
Do not filter bed heights by year in datacage for optional data (plus some cleanup).
|
Thu, 16 Oct 2014 16:45:53 +0200 |
Tom Gottfried |
Give ordered list of measurement stations at river.
|
Thu, 16 Oct 2014 13:39:22 +0200 |
Tom Gottfried |
Add comment to measurement stations info.
|
Thu, 16 Oct 2014 11:15:09 +0200 |
Tom Gottfried |
Reduce code duplication and repair filter for sediment load-recommendations.
|
Wed, 15 Oct 2014 19:48:20 +0200 |
Tom Gottfried |
SCHEMA CHANGE: 'comment' is not acceptable as column name for Oracle.
|
Wed, 15 Oct 2014 19:42:19 +0200 |
Tom Gottfried |
More detailed documentation on SQ-relation import.
|
Wed, 15 Oct 2014 19:35:35 +0200 |
Tom Gottfried |
We only want to use stations with an end km.
|
Wed, 15 Oct 2014 19:20:26 +0200 |
Tom Gottfried |
SCHEMA CHANGE: removed superfluous columns station and river_id from measurement_stations and adapted other components accordingly.
|
Wed, 15 Oct 2014 14:58:46 +0200 |
Tom Gottfried |
SCHEMA CHANGE: There is no boolean data type in oracle, and therefore it's no good idea to use it in postgresql.
|
Tue, 14 Oct 2014 19:21:33 +0200 |
Tom Gottfried |
Whitespace cleanup and small addition regarding sediment load at measurement stations.
|
Tue, 14 Oct 2014 16:33:54 +0200 |
Tom Gottfried |
Purge redundant station-column (the values will go to kmstart).
|
Tue, 14 Oct 2014 16:32:06 +0200 |
Tom Gottfried |
Purge sorting stations without range to end of list.
|
Tue, 14 Oct 2014 15:22:11 +0200 |
Tom Gottfried |
Put date range into facet descriptions for curve and measurements.
|
Tue, 14 Oct 2014 12:41:37 +0200 |
Tom Gottfried |
Distinguish between types of measurement stations and filter appropriately (plus minor cleanup in related classes).
|
Mon, 13 Oct 2014 17:22:52 +0200 |
Tom Gottfried |
Unify colors of SQ-relations and distinguish outliers by point size.
|
Mon, 13 Oct 2014 16:21:09 +0200 |
Tom Gottfried |
Remove non-mapped dependencies of removed theme.
|
Mon, 13 Oct 2014 14:40:47 +0200 |
Tom Gottfried |
Theme-style cleanup for discharge curves.
|
Fri, 10 Oct 2014 15:44:34 +0200 |
Tom Gottfried |
Add possibility to give custom client log4j.properties.
|
Fri, 10 Oct 2014 00:58:30 +0200 |
Tom Gottfried |
Added tag 3.1.7 for changeset 319aa972a1a3
|
Thu, 09 Oct 2014 12:13:56 +0200 |
Raimund Renkert |
Fixed date filter for fix overview.
3.1.7
|
Thu, 09 Oct 2014 12:20:48 +0200 |
Tom Gottfried |
Log successful/unsuccessful authentication without traceback.
|
Thu, 09 Oct 2014 12:13:30 +0200 |
Sascha L. Teichmann |
Backed out changeset da67b2bca1c0 Not needed.
|
Thu, 09 Oct 2014 11:57:17 +0200 |
Sascha L. Teichmann |
Fixing overview filter: Accept date range as UNIX time stamps, too.
|
Wed, 08 Oct 2014 16:28:02 +0200 |
Raimund Renkert |
Add location data to sq relation artifact. Fixed station name.
|
Wed, 08 Oct 2014 16:23:46 +0200 |
Raimund Renkert |
Added location to measurement station sq relation.
|
Wed, 08 Oct 2014 15:41:47 +0200 |
Tom Gottfried |
Further subtitle cleanup (including obsolete classes using them).
|
Wed, 08 Oct 2014 12:27:53 +0200 |
Raimund Renkert |
If context contains pnp, transform W to m.
|
Wed, 08 Oct 2014 11:49:07 +0200 |
Sascha L. Teichmann |
Only the master-artifact should decide about injected CURRENT_KM et al. (and removed dependend obsolete class).
|
Wed, 08 Oct 2014 11:02:16 +0200 |
Raimund Renkert |
Removed dependency to FixWQCurveGenerator in processor.
|
Tue, 07 Oct 2014 19:19:50 +0200 |
Tom Gottfried |
For whatever reason (if any) facet descriptions with trailing whitespace are stripped from the legend.
|
Tue, 07 Oct 2014 19:04:06 +0200 |
Tom Gottfried |
Removed some code duplication and moved macros to more appropriate places in file.
|
Tue, 07 Oct 2014 19:02:50 +0200 |
Tom Gottfried |
Fixed some typos in datacage docs.
|
Tue, 07 Oct 2014 15:23:08 +0200 |
Tom Gottfried |
Unify discharge curve subtitles.
|
Tue, 07 Oct 2014 13:41:54 +0200 |
Raimund Renkert |
Try to determine gauge by km in gauge discharge facet for exporter.
|
Tue, 07 Oct 2014 11:24:13 +0200 |
Tom Gottfried |
Use more recent SmartGWT-build.
|
Tue, 07 Oct 2014 11:23:39 +0200 |
Tom Gottfried |
Add possibility to give custom config for server log.
|
Mon, 06 Oct 2014 19:07:57 +0200 |
Tom Gottfried |
Transform export in cm at gauge. TODO: don't transfrom twice if coming from PegelInfo.
|
Mon, 06 Oct 2014 15:33:52 +0200 |
Raimund Renkert |
merged.
|
Mon, 06 Oct 2014 15:27:20 +0200 |
Raimund Renkert |
Use context constant for current km in fix delta w/t generator.
|
Mon, 06 Oct 2014 14:49:00 +0200 |
Tom Gottfried |
Purge RiverUtils from ATExporter.
|
Mon, 06 Oct 2014 13:41:14 +0200 |
Tom Gottfried |
Manual points shall be plotted in discharge diagrams.
|
Mon, 06 Oct 2014 11:21:42 +0200 |
Tom Gottfried |
It's the description we want to see in the legend, not the facet name.
|
Fri, 03 Oct 2014 10:26:58 +0200 |
Tom Gottfried |
Q-symmetric datacage configuration for user-data.
|
Thu, 02 Oct 2014 19:31:09 +0200 |
Tom Gottfried |
Make derived curve-diagram working with subtitle.
|
Thu, 02 Oct 2014 19:05:01 +0200 |
Tom Gottfried |
Re-add line previously removed accidentally between lots of comments.
|
Thu, 02 Oct 2014 18:57:10 +0200 |
Sascha L. Teichmann |
Added km sub title to fix derivate curve, too.
|
Thu, 02 Oct 2014 16:33:16 +0200 |
Sascha L. Teichmann |
Removed obsolete import.
|
Thu, 02 Oct 2014 14:02:57 +0200 |
Raimund Renkert |
merged.
|
Thu, 02 Oct 2014 14:01:13 +0200 |
Raimund Renkert |
Added i18n strings.
|
Thu, 02 Oct 2014 13:59:20 +0200 |
Raimund Renkert |
Fixed W/Q diagram subtitle in fix analysis.
|
Thu, 02 Oct 2014 13:57:50 +0200 |
Raimund Renkert |
Use the CURRENT_KM constant from injectors.
|
Thu, 02 Oct 2014 11:49:15 +0200 |
Tom Gottfried |
The current km is needed for SQ diagrams too.
|
Thu, 02 Oct 2014 11:46:44 +0200 |
Tom Gottfried |
Overwriting the current km in context gives unexpected results if artifacts from different km have been loaded.
|
Thu, 02 Oct 2014 11:04:14 +0200 |
Tom Gottfried |
s/logger/log/ or removed unused logger.
|
Thu, 02 Oct 2014 10:13:31 +0200 |
Tom Gottfried |
dataset can be null.
|
Thu, 02 Oct 2014 09:55:31 +0200 |
Tom Gottfried |
Fetch current km from context (and remove obsolete or superfluous comments and logging).
|
Thu, 02 Oct 2014 09:42:12 +0200 |
Tom Gottfried |
wUnit might be null.
|
Wed, 01 Oct 2014 15:54:47 +0200 |
Tom Gottfried |
Purge obsolete representation of reference system for discharge tables.
|
Wed, 01 Oct 2014 15:42:55 +0200 |
Tom Gottfried |
Instead of adding datum to Q-values, correctly transform W-values to meter above datum.
|
Wed, 01 Oct 2014 15:24:21 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
Wed, 01 Oct 2014 15:21:54 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
Wed, 01 Oct 2014 14:13:41 +0200 |
Tom Gottfried |
Deliver historical discharge curves in meter, not centimeter over datum.
|
Wed, 01 Oct 2014 13:42:19 +0200 |
Raimund Renkert |
merged.
|
Wed, 01 Oct 2014 13:41:38 +0200 |
Raimund Renkert |
Use the current km from context for fix analysis W/Q subtitle.
|
Wed, 01 Oct 2014 13:40:39 +0200 |
Raimund Renkert |
Updated i18n strings.
|
Wed, 01 Oct 2014 13:40:04 +0200 |
Raimund Renkert |
Added y axis label to discharge processors.
|
Wed, 01 Oct 2014 13:37:27 +0200 |
Raimund Renkert |
Use i18n string for w in cm axis.
|
Wed, 01 Oct 2014 13:36:35 +0200 |
Raimund Renkert |
Fixed i18n string for x axis label in discharge curves.
|
Wed, 01 Oct 2014 13:40:30 +0200 |
Tom Gottfried |
Never ever set current km via RiverUtils.
|
Wed, 01 Oct 2014 13:37:43 +0200 |
Tom Gottfried |
Remove misplaced file extension.
|
Wed, 01 Oct 2014 12:23:39 +0200 |
Tom Gottfried |
Let injectors be strictly distinct from each other and give more meaningful names (they know what they do, not where they will be used. The latter is configuration).
|
Wed, 01 Oct 2014 12:13:28 +0200 |
Sascha L. Teichmann |
Correct url parameter in client.
|
Wed, 01 Oct 2014 12:01:46 +0200 |
Sascha L. Teichmann |
There ist no need to format a number as a string and then re-parse it to double to get its double value. Just take the double value!
|
Wed, 01 Oct 2014 11:07:52 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
Tue, 30 Sep 2014 15:18:09 +0200 |
Tom Gottfried |
Auto-include zero in Q-domain axis.
|
Tue, 30 Sep 2014 14:40:02 +0200 |
Raimund Renkert |
Use ws in m for duration curve.
|
Tue, 30 Sep 2014 13:03:55 +0200 |
Tom Gottfried |
Remove duplication of AnnotationHelper-code in ChartGenerator.
|
Tue, 30 Sep 2014 11:52:17 +0200 |
Tom Gottfried |
Allow W-mainvalues in SQ-relation.
|
Tue, 30 Sep 2014 11:50:43 +0200 |
Tom Gottfried |
Introduce annotations, which know to which axis they belong.
|
Tue, 30 Sep 2014 10:57:58 +0200 |
Raimund Renkert |
Create mainvalue facets before setting up the artifact.
|
Mon, 29 Sep 2014 15:49:04 +0200 |
Raimund Renkert |
Look for gauge if no pnp is set in the context and return w in cm if at gauge.
|
Fri, 26 Sep 2014 18:23:45 +0200 |
Tom Gottfried |
Scale second W-axis in cm according to first axis, which is expanded relative to the data, and set bounds for zooming purposes (plus a bit of cleanup in DiagramGenerator).
|
Fri, 26 Sep 2014 17:22:51 +0200 |
Tom Gottfried |
Avoid NPE if river is not accessible.
|
Fri, 26 Sep 2014 14:22:37 +0200 |
Tom Gottfried |
The derivative curve is also a discharge diagram.
|
Fri, 26 Sep 2014 14:18:27 +0200 |
Tom Gottfried |
Throw non-lethal XPathException if not at gauge instead of lethal PSQLException if at gauge.
|
Fri, 26 Sep 2014 10:53:26 +0200 |
Tom Gottfried |
Q-main values as recommendations in SQ. TODO: solve DDZ.
|
Fri, 26 Sep 2014 10:50:54 +0200 |
Tom Gottfried |
Let's be more generous with facet activity of main values.
|
Fri, 26 Sep 2014 10:17:02 +0200 |
Tom Gottfried |
bed_height_single.old_elevation_model_id is not NOT NULL.
|
Fri, 26 Sep 2014 09:44:48 +0200 |
Tom Gottfried |
Main values: Reduce code duplication and correct logic to specify whether we are at gauge or not.
|
Fri, 26 Sep 2014 08:40:20 +0200 |
Tom Gottfried |
Avoid NPE if no dataset is activated in theme list.
|