| Fri, 24 Jun 2011 12:05:13 +0000 |
Ingo Weinzierl |
#174 Longitudinal section charts will now have an upper margin again.
|
| Fri, 24 Jun 2011 09:49:27 +0000 |
Ingo Weinzierl |
#172 Charts of type duration curve will now have a lower X set to '0'.
|
| Thu, 23 Jun 2011 21:44:24 +0000 |
Sascha L. Teichmann |
ATWriter: Results are now in cm. Made it more robust against corner cases.
|
| Thu, 23 Jun 2011 17:22:17 +0000 |
Sascha L. Teichmann |
Added generation and configuration of AT facets.
|
| Thu, 23 Jun 2011 16:45:48 +0000 |
Sascha L. Teichmann |
Added exporter for AT facets.
|
| Thu, 23 Jun 2011 15:50:44 +0000 |
Sascha L. Teichmann |
New AT writer for results.
|
| Thu, 23 Jun 2011 13:42:47 +0000 |
Ingo Weinzierl |
#157 Both types of discharge curves will now include the '0' value on the x-axis.
|
| Thu, 23 Jun 2011 12:39:59 +0000 |
Sascha L. Teichmann |
WQDay is based on WQ now to make it exportable as AT.
|
| Thu, 23 Jun 2011 12:19:12 +0000 |
Sascha L. Teichmann |
Added base class WQ for WQKms.
|
| Thu, 23 Jun 2011 08:58:30 +0000 |
Sascha L. Teichmann |
Corrected configuration for error reports.
|
| Wed, 22 Jun 2011 14:47:22 +0000 |
Ingo Weinzierl |
#164 Create the items for the adapted WQ state with range information for W and Q.
|
| Wed, 22 Jun 2011 10:54:30 +0000 |
Sascha L. Teichmann |
"Abflusskurve am Pegel" looks correct again.
|
| Wed, 22 Jun 2011 10:36:27 +0000 |
Sascha L. Teichmann |
Improved situtation on rendering "Abflusskurve am Pegel". Not fully working, yet.
|
| Wed, 22 Jun 2011 09:19:16 +0000 |
Sascha L. Teichmann |
Generate facets for "Abflusskurven am Pegel". Not working by now. :-/
|
| Wed, 22 Jun 2011 06:51:36 +0000 |
Ingo Weinzierl |
#161 Include the 0 on the second y axis (the Q axis) in longitudinal section charts intially.
|
| Tue, 21 Jun 2011 21:41:49 +0000 |
Sascha L. Teichmann |
Draw correction curve again.
|
| Tue, 21 Jun 2011 18:10:49 +0000 |
Ingo Weinzierl |
#157 Computed discharge curve charts always have a lower bound set to 0.
|
| Tue, 21 Jun 2011 17:39:29 +0000 |
Ingo Weinzierl |
#90 Added a margin between chart data and chart axes to avoid displaying curves on the chart border.
|
| Tue, 21 Jun 2011 17:03:46 +0000 |
Sascha L. Teichmann |
Fix for flys/issue158
|
| Tue, 21 Jun 2011 16:31:19 +0000 |
Sascha L. Teichmann |
Fix for flys/issue154
|
| Tue, 21 Jun 2011 16:22:28 +0000 |
Sascha L. Teichmann |
Only generate 'outs' if they have facets.
|
| Tue, 21 Jun 2011 14:33:00 +0000 |
Ingo Weinzierl |
Put the time-to-live of the collection into its DESCRIBE document.
|
| Mon, 20 Jun 2011 14:36:42 +0000 |
Sascha L. Teichmann |
Configured states to generate report facets.
|
| Mon, 20 Jun 2011 14:14:20 +0000 |
Sascha L. Teichmann |
Generate report facets if there are problems with the calculations.
|
| Mon, 20 Jun 2011 13:47:59 +0000 |
Sascha L. Teichmann |
Added generator and facet for error reports.
|
| Mon, 20 Jun 2011 12:32:32 +0000 |
Sascha L. Teichmann |
New model to transport data and error reports of calculations.
|
| Sat, 18 Jun 2011 20:20:34 +0000 |
Sascha L. Teichmann |
Added calculation "am Pegel" version to the "Wasserspiegellage" calculation.
|
| Sat, 18 Jun 2011 18:38:04 +0000 |
Sascha L. Teichmann |
Removed more dead code.
|
| Sat, 18 Jun 2011 18:19:34 +0000 |
Sascha L. Teichmann |
Removed dead code.
|
| Sat, 18 Jun 2011 17:03:17 +0000 |
Sascha L. Teichmann |
Only generate facets when needed.
|
| Fri, 17 Jun 2011 16:17:03 +0000 |
Sascha L. Teichmann |
Merged revisions 2127-2133,2136-2137,2140,2143-2144,2146,2150-2151,2153-2154 via svnmerge from
|
| Fri, 17 Jun 2011 14:37:09 +0000 |
Sascha L. Teichmann |
Generate data facets for the computed states.
facets-slt
|
| Fri, 17 Jun 2011 14:03:29 +0000 |
Sascha L. Teichmann |
Add facet to access raw computed data.
facets-slt
|
| Fri, 17 Jun 2011 13:45:50 +0000 |
Sascha L. Teichmann |
Base WST/CSV exports on facets. TODO: generate the facets.
facets-slt
|
| Fri, 17 Jun 2011 13:10:20 +0000 |
Sascha L. Teichmann |
call computeAdvance() if we want to advance.
facets-slt
|
| Fri, 17 Jun 2011 11:23:57 +0000 |
Sascha L. Teichmann |
mico opt: inter cmps are faster than str cmps.
facets-slt
|
| Fri, 17 Jun 2011 11:08:31 +0000 |
Sascha L. Teichmann |
make getGauges() more robust
facets-slt
|
| Fri, 17 Jun 2011 10:40:54 +0000 |
Sascha L. Teichmann |
Removed ComputeCallback because this was thought too complicated. Fixed issue with facets not be re-generated if same state is entered again.
facets-slt
|
| Fri, 17 Jun 2011 09:19:43 +0000 |
Ingo Weinzierl |
OutGenerators use now facets to fetch necessary data.
facets-slt
|
| Thu, 16 Jun 2011 14:31:41 +0000 |
Ingo Weinzierl |
OutGenerators doOut() takes a facet object now instead of just its name.
facets-slt
|
| Thu, 16 Jun 2011 14:10:49 +0000 |
Ingo Weinzierl |
Add index and description of facets to collections describe document.
facets-slt
|
| Thu, 16 Jun 2011 13:24:00 +0000 |
Ingo Weinzierl |
Write computed facets into artifacts describe document.
facets-slt
|
| Thu, 16 Jun 2011 10:05:44 +0000 |
Ingo Weinzierl |
Generated facets for each output aspect.
facets-slt
|
| Thu, 16 Jun 2011 09:04:59 +0000 |
Ingo Weinzierl |
Store facets for each state.
facets-slt
|
| Thu, 16 Jun 2011 08:57:05 +0000 |
Ingo Weinzierl |
Use enums to dispatch computeFeed() and computeAdvance().
facets-slt
|
| Thu, 16 Jun 2011 08:43:58 +0000 |
Ingo Weinzierl |
Added two more compute() methods to ComputeCallback to distinguish between different phases of the artifact.
facets-slt
|
| Thu, 16 Jun 2011 08:25:06 +0000 |
Ingo Weinzierl |
Moved Waterlevel state into the correct package.
facets-slt
|
| Thu, 16 Jun 2011 07:50:56 +0000 |
Ingo Weinzierl |
Added a compute() method to WINFOArtifact which acts as a dispatcher for different computations. It triggers a calculation based on ComputeCallbacks that are generated by the current states.
facets-slt
|
| Wed, 15 Jun 2011 15:28:54 +0000 |
Ingo Weinzierl |
Merged with trunk and introduced hashing of computed values.
facets-slt
|
| Fri, 17 Jun 2011 13:00:54 +0000 |
Ingo Weinzierl |
Added a parameter 'wq_free' that determines that mode of calculation 1 (specifies if the calculation is bound to a gauge or not).
|
| Fri, 17 Jun 2011 12:38:41 +0000 |
Ingo Weinzierl |
DischargeLongitudinalSectionCurve will have corrected W facets now.
|
| Tue, 14 Jun 2011 16:26:59 +0000 |
Sascha L. Teichmann |
DistanceInfoService: Got rid of namespace in result document.
|
| Tue, 14 Jun 2011 15:34:27 +0000 |
Ingo Weinzierl |
#77 The curves in a duration chart will have names now.
|
| Tue, 14 Jun 2011 13:54:19 +0000 |
Ingo Weinzierl |
The min/max W/Q ranges in the panel for calculation4 are written into the DESCRIBE.
|
| Tue, 14 Jun 2011 13:53:25 +0000 |
Sascha L. Teichmann |
Write top 'Oberkante' and bottom 'Unterkante' to out going XML if they exist.
|
| Tue, 14 Jun 2011 10:38:00 +0000 |
Ingo Weinzierl |
The state that is used to enter locations writes the river's range into the DESCRIBE now.
|
| Fri, 10 Jun 2011 15:59:47 +0000 |
Sascha L. Teichmann |
Added error reporting to 'Wasserspiegellage' calculation.
|
| Fri, 10 Jun 2011 14:24:15 +0000 |
Sascha L. Teichmann |
Added error reporting to 'Abflusskurve' calculation.
|
| Fri, 10 Jun 2011 12:38:08 +0000 |
Sascha L. Teichmann |
Added error reporting to 'Dauerzahlen' calculation.
|
| Fri, 10 Jun 2011 10:10:04 +0000 |
Sascha L. Teichmann |
Added methods to remove NaN values.
|
| Fri, 10 Jun 2011 09:19:27 +0000 |
Sascha L. Teichmann |
Added calculation base class to collect the problems during the calculations. Adjusted calculation 4 to use the mechanism.
|
| Thu, 09 Jun 2011 10:48:13 +0000 |
Ingo Weinzierl |
Changed the zoom process - the values in the chart request document are percentual values that apply to every axis.
|
| Thu, 09 Jun 2011 10:31:22 +0000 |
Ingo Weinzierl |
Corrected axes/datasets mappings.
|
| Wed, 08 Jun 2011 19:11:18 +0000 |
Sascha L. Teichmann |
Berechnung 4: Determine the gauges by their station position. This hopefully fixes segment assignment problems.
|
| Wed, 08 Jun 2011 18:50:40 +0000 |
Sascha L. Teichmann |
Berechnung 4: Added more debug output
|
| Wed, 08 Jun 2011 13:57:43 +0000 |
Ingo Weinzierl |
#103 PART 1: The numbers which are written into the static DESCRIBE part are i18n formatted now.
|
| Wed, 08 Jun 2011 13:32:56 +0000 |
Ingo Weinzierl |
#93 Changed the name of calculation type 4.
|
| Wed, 08 Jun 2011 13:03:21 +0000 |
Ingo Weinzierl |
Made the chart range determination more robust against NaN values.
|
| Wed, 08 Jun 2011 12:35:44 +0000 |
Ingo Weinzierl |
Set the second y axis to axis position 1 (starts at 0).
|
| Wed, 08 Jun 2011 10:25:39 +0000 |
Sascha L. Teichmann |
s@m³/s@m\\u00b3/s@
|
| Wed, 08 Jun 2011 10:21:36 +0000 |
Sascha L. Teichmann |
s@m³/s@m\u00b3/s@
|
| Wed, 08 Jun 2011 10:19:23 +0000 |
Sascha L. Teichmann |
Only generate an axis element if a axis really exists.
|
| Tue, 07 Jun 2011 21:01:09 +0000 |
Sascha L. Teichmann |
BackJumpCorrector: Simpified array swapping.
|
| Tue, 07 Jun 2011 15:05:12 +0000 |
Sascha L. Teichmann |
Use java.util.List instead of java.util.Vector. Removed superfluous imports.
|
| Tue, 07 Jun 2011 14:28:44 +0000 |
Sascha L. Teichmann |
code clean up in states
|
| Tue, 07 Jun 2011 13:15:02 +0000 |
Ingo Weinzierl |
The ChartInfoGenerator appends axes range information to the document now.
|
| Tue, 07 Jun 2011 11:43:30 +0000 |
Sascha L. Teichmann |
If Artifact.feed() fails do not store invalid values in database.
|
| Mon, 06 Jun 2011 11:34:44 +0000 |
Sascha L. Teichmann |
Removed asymmetrical "- 1" from width calculation.
|
| Sun, 05 Jun 2011 20:47:51 +0000 |
Sascha L. Teichmann |
Berechnung 4: Fixed problem when more than one value per segment are given.
|
| Sun, 05 Jun 2011 18:24:46 +0000 |
Sascha L. Teichmann |
Refactored version of "Berechnung 4"
|
| Fri, 03 Jun 2011 10:21:13 +0000 |
Ingo Weinzierl |
#90 Removed margins between data area border and curves.
|
| Fri, 03 Jun 2011 07:20:39 +0000 |
Ingo Weinzierl |
Refactored the chart creation in the ChartInfoGenerators. Now, every chart is created by the XYChartGenerator again.
|
| Fri, 03 Jun 2011 06:47:51 +0000 |
Ingo Weinzierl |
Charts are zoomed to a specified view if the attribute document for the chart creation contains an x and/or y range.
|
| Thu, 02 Jun 2011 15:47:08 +0000 |
Sascha L. Teichmann |
Set collection ttl to 6 hours.
|
| Wed, 01 Jun 2011 17:01:44 +0000 |
Sascha L. Teichmann |
Added parser for segments
|
| Wed, 01 Jun 2011 09:57:22 +0000 |
Sascha L. Teichmann |
Fix crashes in back jump correction.
|
| Wed, 01 Jun 2011 09:18:00 +0000 |
Ingo Weinzierl |
The matrix that is used to transform chart image coordinates into chart coordinates supports inverted x-axis now.
|
| Wed, 01 Jun 2011 08:01:07 +0000 |
Ingo Weinzierl |
Introduced a new output generators for creating chart info documents.
|
| Tue, 31 May 2011 14:56:18 +0000 |
Ingo Weinzierl |
Added support for the 'type' parameter of the collection's out() operation.
|
| Tue, 31 May 2011 09:35:19 +0000 |
Sascha L. Teichmann |
Use an explicit reference km for interpolation now.
|
| Mon, 30 May 2011 11:34:06 +0000 |
Sascha L. Teichmann |
Introduce a cache for the distance-info service
|
| Mon, 30 May 2011 09:19:57 +0000 |
Sascha L. Teichmann |
flys/issue82: Only successful interpolations are named.
|
| Fri, 27 May 2011 16:52:37 +0000 |
Sascha L. Teichmann |
Re-eanbled the calculation of the backjump correction.
|
| Fri, 27 May 2011 10:09:46 +0000 |
Ingo Weinzierl |
Removed XML debug statement.
|
| Fri, 27 May 2011 10:03:07 +0000 |
Ingo Weinzierl |
Moved the code part that skips themes to a better place. This let us paint empty charts with no themes at all.
|
| Fri, 27 May 2011 09:47:13 +0000 |
Ingo Weinzierl |
We will no longer put deactivated themes into the chart.
|
| Fri, 27 May 2011 08:46:26 +0000 |
Ingo Weinzierl |
Fixed the process of creating and storing the attribute of a collection.
|
| Thu, 26 May 2011 16:54:16 +0000 |
Sascha L. Teichmann |
Make "Berechnungsart 4" work independent of flow direction. Commented out back jump correction temporarily.
|
| Thu, 26 May 2011 15:55:48 +0000 |
Sascha L. Teichmann |
Generate fields for w/q input depend on flow direction.
|
| Thu, 26 May 2011 14:27:06 +0000 |
Sascha L. Teichmann |
Take the flow direction into account.
|
| Thu, 26 May 2011 09:41:57 +0000 |
Sascha L. Teichmann |
Round exploded values to a precision of 1e-6.
|
| Wed, 25 May 2011 15:31:25 +0000 |
Sascha L. Teichmann |
WST value table: Qs are now stored in ranges for each column.
|
| Tue, 24 May 2011 14:46:45 +0000 |
Sascha L. Teichmann |
First part of storing qs in ranges
|
| Tue, 24 May 2011 13:24:24 +0000 |
Ingo Weinzierl |
Small bugfixes in the WQ selection state.
|
| Tue, 24 May 2011 12:58:55 +0000 |
Ingo Weinzierl |
ISSUE-40 (part I/II) Write values that the user had former selected / inserted into DESCRIBE document to preselect such data in the UI.
|
| Tue, 24 May 2011 12:40:06 +0000 |
Ingo Weinzierl |
Removed needless imports.
|
| Tue, 24 May 2011 12:37:45 +0000 |
Ingo Weinzierl |
ISSUE-85 (part III/III) Use the given kilometer values for the waterlevel computation.
|
| Tue, 24 May 2011 11:27:37 +0000 |
Ingo Weinzierl |
ISSUE-85 (part I/III) Added further fields for the location/range state.
|
| Tue, 24 May 2011 11:23:57 +0000 |
Sascha L. Teichmann |
Moved WST value table cache key to a separate class.
|
| Mon, 23 May 2011 22:33:37 +0000 |
Sascha L. Teichmann |
Introduce model to store q values of WST columns efficiently.
|
| Mon, 23 May 2011 15:11:55 +0000 |
Ingo Weinzierl |
ISSUE-62 (part I/II) States are no longer filled with data - if a state needs user input, it needs to query the owner artifact.
|
| Mon, 23 May 2011 14:32:17 +0000 |
Ingo Weinzierl |
Added a method to dump the artifacts state/data.
|
| Mon, 23 May 2011 13:35:52 +0000 |
Sascha L. Teichmann |
flys/issue84: Forget to select wst kind.
|
| Fri, 20 May 2011 10:41:46 +0000 |
Sascha L. Teichmann |
fix for flys/issue81: km weights were swapped
|
| Fri, 20 May 2011 09:23:09 +0000 |
Ingo Weinzierl |
Tagged release 2.3.1 of flys-artifacts.
|
| Fri, 20 May 2011 09:21:38 +0000 |
Ingo Weinzierl |
Prepared Changes for the upcoming release.
|
| Tue, 28 Jun 2011 07:55:25 +0000 |
Ingo Weinzierl |
Tagged RELEASE 2.4 of flys-client.
|
| Mon, 27 Jun 2011 15:15:34 +0000 |
Ingo Weinzierl |
#182 Initial WQ mode in adapted wq panel is now Q.
|
| Mon, 27 Jun 2011 13:06:22 +0000 |
Ingo Weinzierl |
Prepared Changes for the upcoming release.
|
| Sun, 26 Jun 2011 17:20:57 +0000 |
Sascha L. Teichmann |
Removed trailing whitespace.
|
| Sun, 26 Jun 2011 17:02:31 +0000 |
Sascha L. Teichmann |
Removed superfluous imports.
|
| Fri, 24 Jun 2011 11:19:35 +0000 |
Ingo Weinzierl |
#165 Set the max length of project names to 50 characters.
|
| Fri, 24 Jun 2011 09:53:25 +0000 |
Ingo Weinzierl |
Zoom-to-max-extent will zoom to the initial chart range now (without zoom values given).
|
| Fri, 24 Jun 2011 09:20:22 +0000 |
Ingo Weinzierl |
#21 Newly created projects cannot be opened twice.
|
| Thu, 23 Jun 2011 17:46:08 +0000 |
Ingo Weinzierl |
#170 Changed the DOM manipulation while zoom and drag operation.
|
| Thu, 23 Jun 2011 17:16:08 +0000 |
Sascha L. Teichmann |
Prepare for AT export.
|
| Thu, 23 Jun 2011 11:28:42 +0000 |
Ingo Weinzierl |
Removed the formatter for project names in the project list.
|
| Thu, 23 Jun 2011 10:07:52 +0000 |
Ingo Weinzierl |
Escape project's names in the project list.
|
| Thu, 23 Jun 2011 09:29:46 +0000 |
Ingo Weinzierl |
#165 (part 1) Added tooltips and table headers in the project list.
|
| Thu, 23 Jun 2011 09:22:54 +0000 |
Ingo Weinzierl |
Improved the exception handling.
|
| Thu, 23 Jun 2011 09:11:54 +0000 |
Sascha L. Teichmann |
First version of error reports.
|
| Wed, 22 Jun 2011 15:34:52 +0000 |
Sascha L. Teichmann |
Stub for report service.
|
| Wed, 22 Jun 2011 15:11:15 +0000 |
Ingo Weinzierl |
The adapted WQ panel now displays warnings if no information are present to validate user input.
|
| Wed, 22 Jun 2011 14:02:11 +0000 |
Ingo Weinzierl |
Register newly created CollectionViews at FLYSWorkspace to avoid an inconsistent view.
|
| Wed, 22 Jun 2011 13:39:15 +0000 |
Ingo Weinzierl |
Open projects are removed from screen if the user deletes them (via project list).
|
| Wed, 22 Jun 2011 12:50:20 +0000 |
Ingo Weinzierl |
Implemented the RPC stubs to set the TTL and name of a collection and to delete an existing collection.
|
| Wed, 22 Jun 2011 11:47:07 +0000 |
Ingo Weinzierl |
Added stubs to set the name and ttl of a collection and to delete a collection.
|
| Wed, 22 Jun 2011 10:14:57 +0000 |
Ingo Weinzierl |
Improved the project list - listeners are notified after setting the name and ttl of a project.
|
| Wed, 22 Jun 2011 08:06:19 +0000 |
Ingo Weinzierl |
Adapted a german string in the WQ panel.
|
| Wed, 22 Jun 2011 07:39:12 +0000 |
Ingo Weinzierl |
#104 The WQ panel now display the selected wq mode.
|
| Tue, 21 Jun 2011 17:53:08 +0000 |
Ingo Weinzierl |
Initialize the combobox in the SelectProvider correctly.
|
| Tue, 21 Jun 2011 17:29:18 +0000 |
Ingo Weinzierl |
#156 Do not display report modes as tabs in the project view.
|
| Tue, 21 Jun 2011 17:18:47 +0000 |
Ingo Weinzierl |
The comboboxes to select the calculation mode are no longer editable.
|
| Tue, 21 Jun 2011 17:09:31 +0000 |
Ingo Weinzierl |
Restore the size of project windows if they are brought up to front.
|
| Tue, 21 Jun 2011 16:54:17 +0000 |
Ingo Weinzierl |
DoubleArrayPanel takes care on empty array fields when adding new double values. This avoids displaying 'null' values.
|
| Tue, 21 Jun 2011 16:43:59 +0000 |
Sascha L. Teichmann |
Filter reports and dispatch them to updateReports().
|
| Tue, 21 Jun 2011 16:41:09 +0000 |
Ingo Weinzierl |
#132 Set the initial mode of the location/distance panel to 'distance'.
|
| Tue, 21 Jun 2011 16:22:39 +0000 |
Ingo Weinzierl |
The project list displays the favorite state of a collection now. A gold star means, that a collection is a owner's favorite project and will never die. A silver star means, that the project is a common project.
|
| Tue, 21 Jun 2011 16:14:10 +0000 |
Sascha L. Teichmann |
Set project list update interval to 5 minutes.
|
| Tue, 21 Jun 2011 10:05:04 +0000 |
Ingo Weinzierl |
#22 Introduced a polling mechanism to refresh the projects of a user in the project list.
|
| Tue, 21 Jun 2011 08:13:47 +0000 |
Ingo Weinzierl |
Added i18n strings for each calculation report output.
|
| Mon, 20 Jun 2011 16:57:11 +0000 |
Sascha L. Teichmann |
Forget to commit changelog
|
| Mon, 20 Jun 2011 16:35:43 +0000 |
Sascha L. Teichmann |
Added dummy report panel.
|
| Mon, 20 Jun 2011 16:25:48 +0000 |
Sascha L. Teichmann |
Removed more expensive XPath.
|
| Mon, 20 Jun 2011 10:32:54 +0000 |
Ingo Weinzierl |
#140, #122: Splitted the WQD table in the WQInputPanel into two tables: a table for QD values and a table for W values - only the QD table is selectable.
|
| Fri, 17 Jun 2011 13:46:28 +0000 |
Ingo Weinzierl |
#140 Code cleanup in WQ table.
|
| Fri, 17 Jun 2011 13:03:32 +0000 |
Ingo Weinzierl |
#118 Added 'wq_free' parameter to feed document even if single value mode is selected.
|
| Fri, 17 Jun 2011 11:14:02 +0000 |
Ingo Weinzierl |
#118 Added a further radio button to select 'Q at Gauge' to the WQ panel.
|
| Fri, 17 Jun 2011 10:16:45 +0000 |
Ingo Weinzierl |
Added 'index' and 'description' of a facet to the collection's attribute document. The ChartThemePanel is now working again.
|
| Fri, 17 Jun 2011 09:57:23 +0000 |
Ingo Weinzierl |
The description of a facet is now displayed in the ChartThemePanel.
|
| Thu, 16 Jun 2011 15:57:20 +0000 |
Sascha L. Teichmann |
Alloc TreeNode arrays with the right size because its known.
|
| Wed, 15 Jun 2011 09:03:27 +0000 |
Ingo Weinzierl |
The DoubleArrayPanel is more tolerant towards entered whitespaces.
|
| Wed, 15 Jun 2011 09:01:22 +0000 |
Ingo Weinzierl |
Avoid GWT throwing warnings if no 'old' items exist for the parameter list.
|
| Wed, 15 Jun 2011 08:28:54 +0000 |
Ingo Weinzierl |
#117 Improved double value parsing in DoubleArrayPanel and DoubleRangePanel.
|
| Tue, 14 Jun 2011 16:43:09 +0000 |
Ingo Weinzierl |
#88 Modified strings in the location/distance panel.
|
| Tue, 14 Jun 2011 16:28:19 +0000 |
Sascha L. Teichmann |
DistanceInfoService: Got rid of namespace. Use DOM instead of XPath.
|
| Tue, 14 Jun 2011 15:46:31 +0000 |
Sascha L. Teichmann |
Bring Oberkante and Unterkante into UI.
|
| Tue, 14 Jun 2011 14:19:45 +0000 |
Sascha L. Teichmann |
Loop through 'Unterkante' 'Oberkante' from service.
|
| Tue, 14 Jun 2011 14:01:08 +0000 |
Ingo Weinzierl |
Adjusted a german error message.
|
| Tue, 14 Jun 2011 14:00:19 +0000 |
Ingo Weinzierl |
Introduced a client side input validation for the adapted WQ panel.
|
| Tue, 14 Jun 2011 11:31:33 +0000 |
Ingo Weinzierl |
Introduced a client side validation for the WQ panel.
|
| Tue, 14 Jun 2011 10:42:34 +0000 |
Ingo Weinzierl |
Introduced an input validation for the location panels.
|
| Thu, 09 Jun 2011 14:06:10 +0000 |
Ingo Weinzierl |
Introduced a client side validation before new user data are sent to the server - the range/location panel already implements this validation.
|
| Thu, 09 Jun 2011 10:57:42 +0000 |
Ingo Weinzierl |
Parse the min/max axes ranges for the ChartInfo and modified the zoom and pan actions to match the current server implementation.
|
| Thu, 09 Jun 2011 06:05:44 +0000 |
Ingo Weinzierl |
#139 Fixed NPE while initialising user defined values in the adapted wq panel.
|
| Wed, 08 Jun 2011 14:49:47 +0000 |
Ingo Weinzierl |
Added units to the selected W or Q values in the static UI part.
|
| Wed, 08 Jun 2011 13:28:23 +0000 |
Ingo Weinzierl |
#43 Modified an english warning text.
|
| Wed, 08 Jun 2011 13:21:46 +0000 |
Ingo Weinzierl |
#21 There might be just a single window for each project now. Users can't open a project twice.
|
| Wed, 08 Jun 2011 12:43:38 +0000 |
Ingo Weinzierl |
Avoid NPE while parsing axes in ChartInfoService.
|
| Wed, 08 Jun 2011 10:57:28 +0000 |
Sascha L. Teichmann |
Don't crash if there is no transformer.
|
| Wed, 08 Jun 2011 07:31:01 +0000 |
Ingo Weinzierl |
Added a dirty hack to display project names shorter than 30 characters.
|
| Tue, 07 Jun 2011 13:58:38 +0000 |
Ingo Weinzierl |
The MouseOut event will now finish a current pan operation.
|
| Tue, 07 Jun 2011 13:26:24 +0000 |
Ingo Weinzierl |
Adapted the ChartInfoService to return more information about charts than before. In addition, the PanControl is added to the chart toolbar.
|
| Tue, 07 Jun 2011 13:07:27 +0000 |
Ingo Weinzierl |
Added a PanControl to pan charts.
|
| Tue, 07 Jun 2011 12:51:57 +0000 |
Ingo Weinzierl |
Adjusted the return values of the CSVExportService, so that GWT can handle those values better.
|
| Tue, 07 Jun 2011 10:03:19 +0000 |
Ingo Weinzierl |
Use the same code to create the attribute document for the chart creation in ChartOutputService and ChartInfoService.
|
| Mon, 06 Jun 2011 11:56:15 +0000 |
Ingo Weinzierl |
Repaired broken zoom-out control.
|
| Mon, 06 Jun 2011 11:31:21 +0000 |
Ingo Weinzierl |
#131 Repaired a broken XPath expression for the chart attributes.
|
| Mon, 06 Jun 2011 08:21:08 +0000 |
Ingo Weinzierl |
Improved the zoombox control: cancel the zoom operation if the mouse pointer leaves the chart area.
|
| Fri, 03 Jun 2011 12:19:34 +0000 |
Ingo Weinzierl |
Added missing icon for the zoom-out control.
|
| Fri, 03 Jun 2011 12:18:03 +0000 |
Ingo Weinzierl |
Added a zoom-out control to the chart toolbar which zooms 10% of the current ranges out.
|
| Fri, 03 Jun 2011 08:20:22 +0000 |
Ingo Weinzierl |
Added a control to reset the zoom of a chart. In addition, the zoom buttons are displayed as ImgButtons now.
|
| Fri, 03 Jun 2011 06:34:32 +0000 |
Ingo Weinzierl |
Append the x and y ranges determined after zooming with the ZoomboxControl to the attribute document used for the chart creation.
|
| Wed, 01 Jun 2011 14:13:29 +0000 |
Ingo Weinzierl |
Added the ChartOutputTab as ZoomHandler for the ZoomboxControl - no zooming is done yet.
|
| Wed, 01 Jun 2011 13:43:35 +0000 |
Ingo Weinzierl |
Implemented a zoombox control and added it to the chart toolbar.
|
| Wed, 01 Jun 2011 11:59:59 +0000 |
Ingo Weinzierl |
Improved the layout of the mouse position panel.
|
| Wed, 01 Jun 2011 09:03:18 +0000 |
Ingo Weinzierl |
Adapted the MousePositionPanel to use the Transform2D object for computing the chart coordinates from image coordinates.
|
| Wed, 01 Jun 2011 08:50:40 +0000 |
Ingo Weinzierl |
The collection object in the CollectionView is now accessible via getter method.
|
| Wed, 01 Jun 2011 08:49:39 +0000 |
Ingo Weinzierl |
Removed a debug statement.
|
| Wed, 01 Jun 2011 08:15:58 +0000 |
Ingo Weinzierl |
Added a chart info service to fetch the info document for a specific chart from artifact server.
|
| Fri, 27 May 2011 15:38:24 +0000 |
Ingo Weinzierl |
Added a first implementation of a MousePositionPanel - work is not finished yet.
|
| Fri, 27 May 2011 13:48:25 +0000 |
Ingo Weinzierl |
Moved the toolbar stuff of the chart panel into an own class.
|
| Fri, 27 May 2011 13:10:09 +0000 |
Ingo Weinzierl |
Replaced buttons displayed as labels with real buttons.
|
| Fri, 27 May 2011 09:50:57 +0000 |
Ingo Weinzierl |
The chart in the ChartOutputTab is refreshed when there occur any changes in the chart theme panel.
|
| Fri, 27 May 2011 08:59:26 +0000 |
Ingo Weinzierl |
Connected the CollectionAttributeService with the artifact server - Collection modifications will now be stored in the artifact databae.
|
| Fri, 27 May 2011 08:53:22 +0000 |
Ingo Weinzierl |
Changes in the chart theme panel will now have an effect on the themes stored at the collection.
|
| Thu, 26 May 2011 13:53:36 +0000 |
Ingo Weinzierl |
Connected the actions in the navigation panel with the theme list in the ChartThemePanel - themes can be moved now.
|
| Wed, 25 May 2011 16:23:16 +0000 |
Ingo Weinzierl |
Added a navigation panel to the bottom of the theme control panel to move themes up/down (function not implemented yet).
|
| Wed, 25 May 2011 14:58:42 +0000 |
Ingo Weinzierl |
Added a service stub to update/modify the attribute of a collection (used in the theme control panel).
|
| Wed, 25 May 2011 14:50:37 +0000 |
Ingo Weinzierl |
Removed a bug in the DefaultTheme that prevented setting the artifact of a Theme correctly.
|
| Wed, 25 May 2011 13:42:04 +0000 |
Ingo Weinzierl |
The theme list information stored in the attribute of a collection is read and added in form of Themes and ThemeLists to the Collection.
|
| Wed, 25 May 2011 11:34:34 +0000 |
Ingo Weinzierl |
Implemented the first step of a theme control panel for charts.
|
| Wed, 25 May 2011 11:30:46 +0000 |
Ingo Weinzierl |
Removed needless imports.
|
| Wed, 25 May 2011 08:03:02 +0000 |
Ingo Weinzierl |
Added a new package 'chart' that should be the place where chart relevant classes should be stored. Moved ChartOutputTab into that package.
|
| Wed, 25 May 2011 07:05:22 +0000 |
Ingo Weinzierl |
Bugfix in the range/location panel - avoid NullPointerExceptions in getData().
|
| Tue, 24 May 2011 16:22:34 +0000 |
Ingo Weinzierl |
ISSUE-90 & ISSUE-40 (part II/II) Former selected values are preselected after back jumps.
|
| Tue, 24 May 2011 11:22:05 +0000 |
Ingo Weinzierl |
Added i18n error messages.
|
| Tue, 24 May 2011 11:21:11 +0000 |
Ingo Weinzierl |
Take care on empty Data objects while initializing default values in Location/distance panel.
|
| Tue, 24 May 2011 10:52:00 +0000 |
Ingo Weinzierl |
ISSUE-85 (part II/III) Repaired broken location/range panel.
|
| Tue, 24 May 2011 10:46:48 +0000 |
Ingo Weinzierl |
The default values/labels for Data objects are read from DESCRIBE document.
|
| Tue, 24 May 2011 10:44:59 +0000 |
Ingo Weinzierl |
Enhanced the Data object to save default values/labels.
|
| Mon, 23 May 2011 14:30:54 +0000 |
Ingo Weinzierl |
Added a mechanism to listen to changes relating to output modes of collections and artifacts. Solves a part of ISSUE-62.
|
| Fri, 20 May 2011 10:15:10 +0000 |
Ingo Weinzierl |
Reverted commit that changed the default port of the artifact server.
|
| Fri, 20 May 2011 10:10:26 +0000 |
Ingo Weinzierl |
Added missing i18n strings for duration curve export.
|
| Fri, 20 May 2011 09:28:07 +0000 |
Ingo Weinzierl |
Tagged release 2.3.1 of flys-client.
|
| Fri, 20 May 2011 09:24:46 +0000 |
Ingo Weinzierl |
Prepared Changes for release 2.3.1
|
| Fri, 28 Sep 2012 12:14:12 +0200 |
Thomas Arendsen Hein |
merged flys-backend/2.3.1
2.3.1
|
| Fri, 20 May 2011 09:30:08 +0000 |
Ingo Weinzierl |
Tagged release 2.3.1 of flys-backend.
|
| Fri, 13 May 2011 11:21:39 +0000 |
Ingo Weinzierl |
Prepared Changes for the upcoming release.
|
| Wed, 11 May 2011 08:44:14 +0000 |
Sascha L. Teichmann |
Schema: Added a column which tells if a river counts its km up or downwards.
|
| Tue, 10 May 2011 17:31:10 +0000 |
Sascha L. Teichmann |
Fixed flys/issue11 and flys51.
|
| Mon, 09 May 2011 10:04:23 +0000 |
Sascha L. Teichmann |
Importer: Added unsharp lookup to avoid numerical problems.
|
| Mon, 09 May 2011 00:38:13 +0000 |
Sascha L. Teichmann |
Importer: Fix silly bug and set Hibernate session flushing back to auto.
|
| Mon, 09 May 2011 00:15:45 +0000 |
Sascha L. Teichmann |
Importer: Change caching strategy not to cause OOM any more.
|
| Sun, 08 May 2011 22:41:07 +0000 |
Sascha L. Teichmann |
Importer: Use BigDecimals in hashing to prevent numerical problems. Cache ranges globally, too.
|
| Sun, 08 May 2011 21:34:43 +0000 |
Sascha L. Teichmann |
Importer: Only accept main value types 'Q', 'W', 'D' and 'T' by default.
|
| Sun, 08 May 2011 17:55:49 +0000 |
Sascha L. Teichmann |
Importer: Cache the discharge table values, too.
|
| Sun, 08 May 2011 15:29:45 +0000 |
Sascha L. Teichmann |
Importer: centralized caching
|
| Sun, 08 May 2011 11:20:39 +0000 |
Sascha L. Teichmann |
Schema: Dropped constraint which forces discharge tables to have a unique time interval for a given gauge and kind.
|
| Sun, 08 May 2011 11:07:22 +0000 |
Sascha L. Teichmann |
Importer: make column names in WST files unique by appending (1), (2) and so on in case of collision
|
| Fri, 06 May 2011 15:15:04 +0000 |
Sascha L. Teichmann |
Importer: Import the "HW-Schutzanlagen", too.
|
| Fri, 06 May 2011 10:27:32 +0000 |
Sascha L. Teichmann |
Importer: Make import of historical discharge tables work.
|
| Thu, 05 May 2011 15:25:16 +0000 |
Sascha L. Teichmann |
Importer: parse historical discharge tables, too. TODO: store them in database.
|
| Thu, 05 May 2011 14:51:54 +0000 |
Sascha L. Teichmann |
Importer: Prefix "Zusätzliche Längsschnitte" with "Zus.Längsschnitte" in description.
|
| Thu, 05 May 2011 14:46:41 +0000 |
Sascha L. Teichmann |
Import "Hochwasser-Marken", too.
|
| Thu, 05 May 2011 09:45:13 +0000 |
Sascha L. Teichmann |
Importer: Ignore lines that contain km positions which were found before in the same WST file.
|
| Thu, 05 May 2011 06:04:57 +0000 |
Ingo Weinzierl |
River got a new method that returns all gauges intersected by a given start and end point.
|
| Tue, 03 May 2011 17:40:02 +0000 |
Sascha L. Teichmann |
Importer: forgot to fetch time interval peer
|
| Tue, 03 May 2011 17:34:52 +0000 |
Sascha L. Teichmann |
Importer: Attach a time interval to a discharge table if we find one during import.
|
| Tue, 03 May 2011 17:09:38 +0000 |
Sascha L. Teichmann |
Importer: Try to extract time ranges from at files.
|
| Tue, 03 May 2011 14:18:43 +0000 |
Sascha L. Teichmann |
Parse and store "amtliche Linien" wst files.
|
| Tue, 03 May 2011 13:50:37 +0000 |
Sascha L. Teichmann |
Importer: parse and store fixation wst files as well
|
| Tue, 03 May 2011 11:32:11 +0000 |
Sascha L. Teichmann |
Importer: Support parsing "zusaetzliche Laengsschnitte".
|
| Mon, 02 May 2011 15:58:58 +0000 |
Sascha L. Teichmann |
Fixed flys/issue19
|
| Mon, 02 May 2011 11:33:32 +0000 |
Ingo Weinzierl |
Introduced a 'scale' parameter in Gauge.determineMinMaxW().
|
| Sun, 01 May 2011 11:14:18 +0000 |
Sascha L. Teichmann |
Removed superfluous import.
|
| Wed, 20 Apr 2011 07:21:03 +0000 |
Ingo Weinzierl |
Implemented a WstColumnValue cache to speed up inserting WST files into database.
|
| Mon, 18 Apr 2011 17:01:00 +0000 |
Sascha L. Teichmann |
Forgot to add db update to changelog
|
| Mon, 18 Apr 2011 15:52:53 +0000 |
Sascha L. Teichmann |
Added a view 'wst_value_table' which aggregates the data to build w/q value tables.
|
| Mon, 18 Apr 2011 13:34:07 +0000 |
Sascha L. Teichmann |
Add forgotten one to many relation Wst -> WstColumn.
|
| Mon, 18 Apr 2011 11:06:08 +0000 |
Sascha L. Teichmann |
Import of q ranges of wst files was totally broken.
|
| Mon, 18 Apr 2011 08:15:32 +0000 |
Sascha L. Teichmann |
Importer: Forgot kind parameter in peer fetching query.
|
| Mon, 18 Apr 2011 07:29:05 +0000 |
Ingo Weinzierl |
Added a new method to determine the selected gauge of a river based on a start and end point.
|
| Fri, 15 Apr 2011 16:06:15 +0000 |
Sascha L. Teichmann |
Added 'position' column to wst_columns to allow order them by there column position in the original wst file.
|
| Fri, 15 Apr 2011 15:28:35 +0000 |
Sascha L. Teichmann |
Forget ',' in schema.
|
| Fri, 15 Apr 2011 14:30:54 +0000 |
Sascha L. Teichmann |
Fixed index problem when an empty list is returned.
|
| Fri, 15 Apr 2011 13:45:06 +0000 |
Ingo Weinzierl |
Added methods to retrieve the min and max W and Q values of a Wst and Gauge.
|
| Fri, 15 Apr 2011 10:31:15 +0000 |
Sascha L. Teichmann |
Added new column 'kind' in discharge tables and wst to distinguish between different types.
|
| Fri, 15 Apr 2011 09:49:21 +0000 |
Ingo Weinzierl |
Moved the SessionHolder from flys-artifacts to flys-backend.
|
| Thu, 14 Apr 2011 13:43:53 +0000 |
Ingo Weinzierl |
Added a method to River that returns the min and max distance of the river.
|
| Sun, 03 Apr 2011 10:41:27 +0000 |
Sascha L. Teichmann |
Removed trailing whitespace.
|
| Wed, 30 Mar 2011 13:43:59 +0000 |
Ingo Weinzierl |
Tagged RELEASE 0.1 of FLYS backend.
|
| Fri, 28 Sep 2012 12:14:11 +0200 |
Thomas Arendsen Hein |
merged flys-artifacts/2.3.1
|
| Fri, 20 May 2011 09:23:09 +0000 |
Ingo Weinzierl |
Tagged release 2.3.1 of flys-artifacts.
|
| Fri, 20 May 2011 06:04:42 +0000 |
Hans Plum |
Notes to Release V 2.3.1
|
| Thu, 19 May 2011 14:51:53 +0000 |
Sascha L. Teichmann |
Increment kms array size by one to take the end of range, too.
|
| Thu, 19 May 2011 14:38:15 +0000 |
Sascha L. Teichmann |
Use unsharp km lookup (epsilon = 0.0001).
|
| Thu, 19 May 2011 12:39:41 +0000 |
Ingo Weinzierl |
ISSUE-66 Fixed broken english subtitle template for longitudinal section charts.
|
| Thu, 19 May 2011 12:33:12 +0000 |
Ingo Weinzierl |
The curve of a computed discharge curve has a human readable text now.
|
| Thu, 19 May 2011 09:54:57 +0000 |
Sascha L. Teichmann |
Reintroduced titles for the "W for unausgeglichene Abfluesse".
|
| Thu, 19 May 2011 09:45:29 +0000 |
Ingo Weinzierl |
Added names for discharge curves (at gauges).
|
| Thu, 19 May 2011 09:31:47 +0000 |
Sascha L. Teichmann |
Removed dead code
|
| Thu, 19 May 2011 09:24:08 +0000 |
Sascha L. Teichmann |
use correct kms and step width now now
|
| Wed, 18 May 2011 17:37:06 +0000 |
Sascha L. Teichmann |
Use new logic to calculate "W für ungleichwertige Abfluesse". Not working yet.
|
| Wed, 18 May 2011 10:59:38 +0000 |
Ingo Weinzierl |
Enabled the discharge longitudinal section to be exported as WST.
|
| Wed, 18 May 2011 09:11:10 +0000 |
Sascha L. Teichmann |
flys/issue69: Connected calculation with the UI
|
| Wed, 18 May 2011 09:02:50 +0000 |
Ingo Weinzierl |
W and Q curves in longitudinal section curves will now have names.
|
| Wed, 18 May 2011 08:04:54 +0000 |
Ingo Weinzierl |
WSTs will now have a header that contains the names of the Ws or Qs that had been defined for the computation.
|
| Tue, 17 May 2011 16:31:07 +0000 |
Ingo Weinzierl |
Implemented writer that creates WSTs and enabled the WaterlevelExporter to create those.
|
| Tue, 17 May 2011 14:22:27 +0000 |
Ingo Weinzierl |
Added a new class that supports formatters for different types of data.
|
| Tue, 17 May 2011 11:53:02 +0000 |
Ingo Weinzierl |
ISSUE-72 Repaired broken XPath expression in MainValuesService to extract start and end kilometer.
|
| Tue, 17 May 2011 08:55:38 +0000 |
Sascha L. Teichmann |
Separated the WST table loading logic from the calculations.
|
| Tue, 17 May 2011 07:39:33 +0000 |
Ingo Weinzierl |
Tagged RELEASE 2.3
|
| Fri, 20 May 2011 09:28:07 +0000 |
Ingo Weinzierl |
Tagged release 2.3.1 of flys-client.
|
| Fri, 20 May 2011 06:14:26 +0000 |
Hans Plum |
Reverted src/main/java/de/intevation/flys/client/client/config.xml after unintentional change
|
| Fri, 20 May 2011 06:10:48 +0000 |
Hans Plum |
NEWS to Release V 2.3.1
|
| Thu, 19 May 2011 14:51:35 +0000 |
Ingo Weinzierl |
Prepared Changes for the upcoming RELEASE 2.3.1
|
| Thu, 19 May 2011 13:02:47 +0000 |
Ingo Weinzierl |
ISSUE-35 The project view has a maximize button now.
|
| Thu, 19 May 2011 12:31:23 +0000 |
Ingo Weinzierl |
ISSUE-43 Adapted the english warning the is displayed before a language switch takes place.
|
| Thu, 19 May 2011 09:52:14 +0000 |
Ingo Weinzierl |
Added missing i18n strings for computed discharge curve exports.
|
| Wed, 18 May 2011 11:12:06 +0000 |
Ingo Weinzierl |
Added i18n strings for exports.
|
| Tue, 17 May 2011 10:14:22 +0000 |
Ingo Weinzierl |
Adjusted the width of an export button and added a tooltip to distinguish different exports.
|
| Tue, 17 May 2011 09:58:53 +0000 |
Ingo Weinzierl |
Adjusted a method signature of ClientProtocolUtils that has been changed in the last revision.
|
| Tue, 17 May 2011 07:51:26 +0000 |
Ingo Weinzierl |
Tagged RELEASE 2.3 of flys-client.
|
| Fri, 28 Sep 2012 12:14:10 +0200 |
Thomas Arendsen Hein |
merged flys-artifacts/2.3
2.3
|
| Tue, 17 May 2011 07:39:33 +0000 |
Ingo Weinzierl |
Tagged RELEASE 2.3
|
| Mon, 16 May 2011 10:34:59 +0000 |
Hans Plum |
Added NEWS File for collecting enduser-sepcific information for releases
|
| Sun, 15 May 2011 21:08:41 +0000 |
Sascha L. Teichmann |
First step to calculate "W fuer ungleichwertige Abfluesse" correctly. flys/issue55
|
| Sun, 15 May 2011 10:59:08 +0000 |
Sascha L. Teichmann |
Fix step to fix issue69: Do the right calculation
|
| Fri, 13 May 2011 11:26:29 +0000 |
Ingo Weinzierl |
Prepared Changes for the upcoming release 2.3.
|
| Fri, 13 May 2011 08:00:58 +0000 |
Ingo Weinzierl |
ISSUE-37 The river state wants to be rendered using a river_panel UI provider.
|
| Thu, 12 May 2011 09:11:16 +0000 |
Ingo Weinzierl |
Charts are generated using the size defined in the incoming request document.
|
| Wed, 11 May 2011 16:31:38 +0000 |
Ingo Weinzierl |
ISSUE-52 The longitudinal section charts will now always have the head of the river at the left side.
|
| Wed, 11 May 2011 09:51:54 +0000 |
Sascha L. Teichmann |
MetaDataService: Make incoming XML symmetric to DistanceInfoService.
|
| Tue, 10 May 2011 17:57:56 +0000 |
Ingo Weinzierl |
ISSUE-47 Adjusted the line color of W, Q and corrected W curves (temporarilly).
|
| Tue, 10 May 2011 17:12:15 +0000 |
Ingo Weinzierl |
Display gridlines in charts.
|
| Tue, 10 May 2011 16:10:01 +0000 |
Ingo Weinzierl |
ISSUE-53 Formatted number values of CSV exports.
|
| Tue, 10 May 2011 15:28:30 +0000 |
Ingo Weinzierl |
Implemented the input validation of WQ in the adapted WQ panel.
|
| Tue, 10 May 2011 13:18:03 +0000 |
Ingo Weinzierl |
The CSV exports will now have headers.
|
| Tue, 10 May 2011 12:43:12 +0000 |
Sascha L. Teichmann |
Datacage: Added river parameter to meta data services.
|
| Tue, 10 May 2011 12:19:17 +0000 |
Ingo Weinzierl |
Added subtitles to the available charts.
|
| Tue, 10 May 2011 11:40:15 +0000 |
Ingo Weinzierl |
Added a method to Resources that returns translated compound messages.
|
| Tue, 10 May 2011 10:26:26 +0000 |
Ingo Weinzierl |
Improved the OutGenerator interface to set a master artifact for the out generation.
|
| Tue, 10 May 2011 07:40:06 +0000 |
Ingo Weinzierl |
Enabled the WINFO artifact to choose between W and Q mode in the adapted wq panel of the discharge longitudinal section computation.
|
| Mon, 09 May 2011 19:54:24 +0000 |
Sascha L. Teichmann |
Datacage service: Cleanup served XML document.
|
| Mon, 09 May 2011 13:47:15 +0000 |
Sascha L. Teichmann |
Datacage: Added forgotten columns of fixation WST to datcage template.
|
| Mon, 09 May 2011 12:53:49 +0000 |
Ingo Weinzierl |
Enabled i18n support for charts.
|
| Mon, 09 May 2011 09:55:47 +0000 |
Ingo Weinzierl |
Added a CSV exporter for the discharge longitudinal section computation.
|
| Sat, 07 May 2011 21:34:02 +0000 |
Sascha L. Teichmann |
Back jump correction should work now for both flow directions.
|
| Fri, 06 May 2011 16:49:31 +0000 |
Sascha L. Teichmann |
Added data cage configuration for 'Längsschnitt'.
|
| Fri, 06 May 2011 16:15:18 +0000 |
Sascha L. Teichmann |
Add data cage configuration for "Abflusskurve [NN + m]".
|
| Fri, 06 May 2011 14:20:26 +0000 |
Ingo Weinzierl |
Added an OutGenerator to create discharge longitudinal section charts.
|
| Fri, 06 May 2011 14:19:27 +0000 |
Ingo Weinzierl |
Implemented methods to retrieve and compute the data used to create discharge longitudinal sections.
|
| Thu, 05 May 2011 12:34:53 +0000 |
Ingo Weinzierl |
Small bugfix in the adapted WQ state and further i18n strings.
|
| Thu, 05 May 2011 12:31:28 +0000 |
Ingo Weinzierl |
Changed the y-axis title of the computed discharge curve.
|
| Thu, 05 May 2011 06:12:44 +0000 |
Ingo Weinzierl |
Improved the transition model and added states to enable the 'discharge longitudinal section' computation - NOTE: the work in this computation has not finished yet.
|
| Thu, 05 May 2011 05:27:41 +0000 |
Ingo Weinzierl |
Use a default step width (100m) between two kilometers if no width is given.
|
| Thu, 05 May 2011 04:52:47 +0000 |
Ingo Weinzierl |
Fixed a potential NullPointerException while creating a longitudinal section chart.
|
| Wed, 04 May 2011 17:01:22 +0000 |
Sascha L. Teichmann |
fix flys/issue30
|
| Wed, 04 May 2011 13:51:25 +0000 |
Sascha L. Teichmann |
'berechnete Abflusskurve': generate ws from qs
|
| Wed, 04 May 2011 10:10:11 +0000 |
Ingo Weinzierl |
Filled the discharge curve exporter (CSV) with code - now, it generates a CSV export with the computed discharge curve data.
|
| Wed, 04 May 2011 08:24:50 +0000 |
Ingo Weinzierl |
Enabled the WINFO artifact to compute the data for discharge curves (computed) - ComputedDischargeCurveGenerator uses those values now to create the chart.
|
| Wed, 04 May 2011 07:48:39 +0000 |
Ingo Weinzierl |
Improved the transition model and added classes to enable the WINFO artifact to create computed discharge curves - NOTE: each of the new classes is just a stub.
|
| Tue, 03 May 2011 17:37:56 +0000 |
Ingo Weinzierl |
Added an exporter to export the computed data of a duration curve.
|
| Tue, 03 May 2011 17:34:29 +0000 |
Ingo Weinzierl |
Modified a confusing debug statement.
|
| Tue, 03 May 2011 16:36:21 +0000 |
Ingo Weinzierl |
Added an exporter (OutGenerator) for waterlevels which currently supports CSV exports.
|
| Tue, 03 May 2011 16:26:35 +0000 |
Ingo Weinzierl |
Introduced an export output target on collection level that enables collections to be exported.
|
| Tue, 03 May 2011 13:23:00 +0000 |
Ingo Weinzierl |
I18N Bugfix.
|
| Tue, 03 May 2011 13:15:56 +0000 |
Ingo Weinzierl |
Added i18n strings for the location selection.
|
| Tue, 03 May 2011 12:05:32 +0000 |
Ingo Weinzierl |
Enabled the WINFO artifact to create duration curves - new OutGenerator, added methods for data computation.
|
| Tue, 03 May 2011 09:23:17 +0000 |
Sascha L. Teichmann |
visualize-transitions.xsl: State quoting was done wrong.
|
| Mon, 02 May 2011 16:58:04 +0000 |
Ingo Weinzierl |
Enhanced the transition model to reach a state that creates duration curves.
|
| Mon, 02 May 2011 16:50:58 +0000 |
Sascha L. Teichmann |
Flush/persist cache at end of program.
|
| Mon, 02 May 2011 16:44:02 +0000 |
Ingo Weinzierl |
The DischargeCurveGenerator uses public methods of FLYSArtifact to retrieve all necessary information of the current settings.
|
| Mon, 02 May 2011 16:28:57 +0000 |
Sascha L. Teichmann |
Moved expensive allocation of result arrays out of km loop.
|
| Mon, 02 May 2011 15:17:04 +0000 |
Ingo Weinzierl |
Enabled the FLYSArtifact to handle an array of inserted WQ values (without given ranges).
|
| Mon, 02 May 2011 13:42:02 +0000 |
Sascha L. Teichmann |
Repaired DischargeTables.getQForW()
|
| Mon, 02 May 2011 12:47:10 +0000 |
Ingo Weinzierl |
Enabled the server to handle longitudinal section chart requests with inserted W data - Ws are transformed into Qs then.
|
| Mon, 02 May 2011 12:41:24 +0000 |
Ingo Weinzierl |
Removed an unused parameter from DischargeTables.getQForW().
|
| Mon, 02 May 2011 09:41:22 +0000 |
Ingo Weinzierl |
Ws and Qs of a longitudinal section chart are mapped to an own range axis now.
|
| Sun, 01 May 2011 10:58:38 +0000 |
Sascha L. Teichmann |
Added caching support for the wst value tables.
|
| Fri, 29 Apr 2011 16:56:37 +0000 |
Sascha L. Teichmann |
Added ehcache support.
|
| Fri, 29 Apr 2011 15:10:44 +0000 |
Sascha L. Teichmann |
Added meta data service.
|
| Fri, 29 Apr 2011 14:39:42 +0000 |
Sascha L. Teichmann |
Added meta service stub. TODO: Add meta data builder.
|
| Fri, 29 Apr 2011 13:06:49 +0000 |
Ingo Weinzierl |
Bugfix: Changed the datastructure of the ThemeList (inner class of FLYSArtifactCollection) to store the theme of a chart in an ordered list -> Q curves of longitudinal section charts are now drawn.
|
| Fri, 29 Apr 2011 10:13:24 +0000 |
Ingo Weinzierl |
Implemented the chart creation of a longitudinal section chart - W and Q facets.
|
| Fri, 29 Apr 2011 10:02:59 +0000 |
Ingo Weinzierl |
Improved the calculation of the step width of ranges.
|
| Fri, 29 Apr 2011 10:01:41 +0000 |
Ingo Weinzierl |
New method WQKms.size() to retrieve the number of elements in the data pool.
|
| Fri, 29 Apr 2011 08:39:17 +0000 |
Sascha L. Teichmann |
WQKms model: Added a get() method which takes destination array as an argument.
|
| Fri, 29 Apr 2011 08:28:44 +0000 |
Ingo Weinzierl |
Introduced GNU Trove to store WQKms values in a more performant data structure.
|
| Fri, 29 Apr 2011 08:13:56 +0000 |
Ingo Weinzierl |
Added the name of the facet to the parameterlist of OutGenerator.doOut().
|
| Fri, 29 Apr 2011 08:02:54 +0000 |
Ingo Weinzierl |
Added themes and mappings for the W and Q theme of a longitudinal section curve.
|
| Fri, 29 Apr 2011 07:46:27 +0000 |
Ingo Weinzierl |
Added necessary methods to start the computation of waterlevel data.
|
| Fri, 29 Apr 2011 07:27:05 +0000 |
Ingo Weinzierl |
Introduced a model class to store a set of triple data objects that consist of W, Q and Kms information.
|
| Fri, 29 Apr 2011 07:22:25 +0000 |
Ingo Weinzierl |
Bugfix: Removed endless loop and a bug while iterating over Hibernate results.
|
| Thu, 28 Apr 2011 12:54:11 +0000 |
Ingo Weinzierl |
Added an OutGenerator for creating longitudinal section curves.
|
| Thu, 28 Apr 2011 12:23:40 +0000 |
Ingo Weinzierl |
Bugfix: Added missing <output-generators> section to the global configuration.
|
| Thu, 28 Apr 2011 11:32:41 +0000 |
Ingo Weinzierl |
Added a further state that is reached if the waterlevel calculation mode has been chosen.
|
| Thu, 28 Apr 2011 11:22:45 +0000 |
Ingo Weinzierl |
Added a new Transition to compare values.
|
| Thu, 28 Apr 2011 11:20:11 +0000 |
Ingo Weinzierl |
Bugfixes: Adapted a broken method call of TransitionEngine.isStateReachable() and added the outputs of a current state to the DESCRIBE.
|
| Thu, 28 Apr 2011 11:16:21 +0000 |
Ingo Weinzierl |
Bugfix: Added the missing init() method to a Transition and call it in the TransitionFactory after a Transition has been created.
|
| Thu, 28 Apr 2011 11:13:06 +0000 |
Ingo Weinzierl |
Bugfix: The outputs of a Collection's attribute document are stored in an outputs node now instead of being stored toplevel in the document.
|
| Thu, 28 Apr 2011 11:08:34 +0000 |
Ingo Weinzierl |
Throw an illegal argument exception in LocationDistanceSelect.validate() and WQSelect.validate() if no data has been inserted so far.
|
| Thu, 28 Apr 2011 09:09:44 +0000 |
Sascha L. Teichmann |
Added XSL transformation do create Graphviz digraph out of conf.xml
|
| Thu, 28 Apr 2011 08:14:20 +0000 |
Ingo Weinzierl |
The OutGenerator gets the theme of a facet while output creation.
|
| Wed, 27 Apr 2011 14:42:52 +0000 |
Ingo Weinzierl |
Removed useless imports.
|
| Wed, 27 Apr 2011 14:40:44 +0000 |
Ingo Weinzierl |
Added an abstract OutGenerator that should be the base class for all generators which create charts.
|
| Wed, 27 Apr 2011 14:35:44 +0000 |
Ingo Weinzierl |
Improved the out() operation of a Collection - the OutGenerator gets to know about the facets and its theme.
|
| Tue, 26 Apr 2011 13:29:18 +0000 |
Ingo Weinzierl |
The Attributes of a collection are written into its DESCRIBE now.
|
| Tue, 26 Apr 2011 13:17:08 +0000 |
Ingo Weinzierl |
Initialized the facet2theme mappings configured in themes.xml and added a function to the ThemeFactory that retrieves a theme from FLYSContext based on its name.
|
| Fri, 22 Apr 2011 15:49:35 +0000 |
Sascha L. Teichmann |
Corrected a silly c&p mistake.
|
| Fri, 22 Apr 2011 09:57:27 +0000 |
Sascha L. Teichmann |
Implementation of the "Ruecksprungkorrektur" to be done in "W fuer angepassten Abflusslaengschnitt".
|
| Thu, 21 Apr 2011 08:49:58 +0000 |
Ingo Weinzierl |
Removed debug code that has been commited by accident.
|
| Thu, 21 Apr 2011 08:47:39 +0000 |
Ingo Weinzierl |
Added a first small theme configuration and code to read it.
|
| Thu, 21 Apr 2011 08:44:41 +0000 |
Ingo Weinzierl |
Implementation of interfaces and its default implementations and a factory to work with themes.
|
| Wed, 20 Apr 2011 14:26:51 +0000 |
Sascha L. Teichmann |
Implementation of "Abflusskurve/Abflusstafel" calculation.
|
| Wed, 20 Apr 2011 13:13:19 +0000 |
Sascha L. Teichmann |
Added dependency to Apache Commons Math 2.2 (Apache License 2.0)
|
| Wed, 20 Apr 2011 09:46:40 +0000 |
Sascha L. Teichmann |
Discharge table: Fix problem when sorting by q (copied w instead of q).
|
| Wed, 20 Apr 2011 08:00:38 +0000 |
Ingo Weinzierl |
Fixed broken HQL statement.
|
| Tue, 19 Apr 2011 17:43:39 +0000 |
Sascha L. Teichmann |
Implemented the "Wasserstand/Wasserspiegellagen" calculation.
|
| Tue, 19 Apr 2011 17:37:21 +0000 |
Sascha L. Teichmann |
Discharge table: we need a getQForW() and not a getWForQ().
|
| Tue, 19 Apr 2011 14:48:28 +0000 |
Sascha L. Teichmann |
Discharge tables: Sorting of q values was done wrong.
|
| Tue, 19 Apr 2011 13:10:27 +0000 |
Ingo Weinzierl |
The list of annotations returned by the AnnotationFactory is ordered by its range.
|
| Tue, 19 Apr 2011 12:33:39 +0000 |
Ingo Weinzierl |
Added a service that returns the MainValues of a Gauge based on a river name and a stationing.
|
| Tue, 19 Apr 2011 12:31:07 +0000 |
Ingo Weinzierl |
Added a factory that returns MainValues.
|
| Tue, 19 Apr 2011 11:05:27 +0000 |
Sascha L. Teichmann |
Discharge table: Added static method getWForQ() to interpolate a w value for a given q value based on a given discharge table.
|
| Tue, 19 Apr 2011 10:32:31 +0000 |
Sascha L. Teichmann |
Discharge tables: Added convenience constructors/methods to ease the access to the master discharge table of a gauge.
|
| Mon, 18 Apr 2011 16:01:23 +0000 |
Sascha L. Teichmann |
Moved the query complexity of creating a w/q value table into view
|
| Mon, 18 Apr 2011 14:40:35 +0000 |
Sascha L. Teichmann |
Fetches w/q value tables from the backend.
|
| Mon, 18 Apr 2011 13:23:12 +0000 |
Ingo Weinzierl |
Changed the error key that is written to the result document of the feed operation.
|
| Mon, 18 Apr 2011 13:21:52 +0000 |
Ingo Weinzierl |
The inserted river is validated in the feed operation().
|
| Mon, 18 Apr 2011 13:00:57 +0000 |
Ingo Weinzierl |
The calculation method is validated in the feed() operation.
|
| Mon, 18 Apr 2011 12:36:08 +0000 |
Ingo Weinzierl |
The inserted ranges (distance and WQ ranges) are validated in the feed() operation.
|
| Mon, 18 Apr 2011 09:34:18 +0000 |
Ingo Weinzierl |
Removed testing code that has been comitted by accident in the last revision.
|
| Mon, 18 Apr 2011 07:39:17 +0000 |
Ingo Weinzierl |
The getGauge() method of the FLYSArtifact returns the first gauge based on the given stationing now.
|
| Fri, 15 Apr 2011 13:47:10 +0000 |
Ingo Weinzierl |
The WQ state fills the DESCRIBE with default values for W and Q.
|
| Fri, 15 Apr 2011 13:46:22 +0000 |
Ingo Weinzierl |
Added a WstFactory to return Wst objects.
|
| Fri, 15 Apr 2011 13:37:51 +0000 |
Ingo Weinzierl |
FLYSArtifact provides methods to retrieve the real River, Gauge objects.
|
| Fri, 15 Apr 2011 10:10:37 +0000 |
Ingo Weinzierl |
Bugfix: repaired broken imports of the session holder.
|
| Fri, 15 Apr 2011 09:52:37 +0000 |
Ingo Weinzierl |
Removed the SessionHolder and adapted imports.
|
| Thu, 14 Apr 2011 13:45:50 +0000 |
Sascha L. Teichmann |
Acquire/release sessions in services to avoid db connection leaks.
|
| Thu, 14 Apr 2011 13:36:06 +0000 |
Ingo Weinzierl |
The location/distance state now writes default values into DESCRIBE.
|
| Thu, 14 Apr 2011 13:26:29 +0000 |
Ingo Weinzierl |
Added a new function to RiverFactory that retrieves a River object based on a given river name.
|
| Thu, 14 Apr 2011 13:15:16 +0000 |
Sascha L. Teichmann |
Backend access: Static methods are using the SessionHolder, too.
|
| Thu, 14 Apr 2011 13:11:12 +0000 |
Ingo Weinzierl |
Finalized the SessionCallContextListener and registered it as CallContext.Listener in the configuration.
|
| Thu, 14 Apr 2011 12:59:21 +0000 |
Ingo Weinzierl |
Bugfix: Call correct method to retrieve and initialize an instance of SessionFactoryProvider.
|
| Thu, 14 Apr 2011 12:08:47 +0000 |
Sascha L. Teichmann |
Added a session holder to hold hibernate sessions.
|
| Thu, 14 Apr 2011 11:18:28 +0000 |
Ingo Weinzierl |
Added an Implementation of CallContext.Listener to open/close Hibernate Sessions for each request.
|
| Thu, 14 Apr 2011 08:32:18 +0000 |
Ingo Weinzierl |
Modified the states' describe() method - related to the last commit.
|
| Thu, 14 Apr 2011 08:23:15 +0000 |
Ingo Weinzierl |
Removed the state to explicitly select a gauge.
|
| Wed, 13 Apr 2011 08:31:20 +0000 |
Ingo Weinzierl |
Bugfix: Repaired the dynamic UI part of the RiverSelect state in DESCRIBE.
|
| Tue, 12 Apr 2011 13:42:14 +0000 |
Ingo Weinzierl |
Write the name of an artifact into the DESCRIBE document.
|
| Tue, 12 Apr 2011 07:49:36 +0000 |
Ingo Weinzierl |
Bugfix: States are filled with data before they describe themself.
|
| Mon, 11 Apr 2011 12:54:03 +0000 |
Ingo Weinzierl |
Implemented a service that retrieves distance information for a specific river.
|
| Wed, 06 Apr 2011 10:01:49 +0000 |
Ingo Weinzierl |
The FLYSArtifactCollection overrides out() and uses OutGenerators to create output for this operation.
|
| Wed, 06 Apr 2011 09:56:38 +0000 |
Ingo Weinzierl |
Added a DischargeCurveGenerator that creates discharge curves.
|
| Wed, 06 Apr 2011 09:53:14 +0000 |
Ingo Weinzierl |
Changed the visibility of getData() method of FLYSArtifacts.
|
| Sun, 03 Apr 2011 10:55:16 +0000 |
Sascha L. Teichmann |
Removed trailing whitespace.
|
| Sun, 03 Apr 2011 10:53:14 +0000 |
Sascha L. Teichmann |
Make project compilable again.
|
| Thu, 31 Mar 2011 10:56:08 +0000 |
Ingo Weinzierl |
Added code to parse the configured OutGenerators in the global configuration and to save a map of such in the FLYSContext.
|
| Thu, 31 Mar 2011 10:54:07 +0000 |
Ingo Weinzierl |
Added an OutGenerator interface that might be used to generator collected outputs of a set of artifacts.
|
| Wed, 30 Mar 2011 16:00:51 +0000 |
Ingo Weinzierl |
Removed the Backend reference from FLYSArtifactCollection.
|
| Wed, 30 Mar 2011 15:21:12 +0000 |
Ingo Weinzierl |
Enhanced the output mode for discharge curves with three facets.
|
| Wed, 30 Mar 2011 13:47:02 +0000 |
Ingo Weinzierl |
Tagged RELEASE 0.1 of FLYS Artifacts.
|
| Tue, 17 May 2011 07:51:26 +0000 |
Ingo Weinzierl |
Tagged RELEASE 2.3 of flys-client.
|
| Mon, 16 May 2011 10:36:48 +0000 |
Hans Plum |
Added missing information for release
|
| Mon, 16 May 2011 10:27:47 +0000 |
Hans Plum |
Added NEWS File for collecting enduser-sepcific information for releases
|
| Fri, 13 May 2011 11:24:55 +0000 |
Ingo Weinzierl |
Prepared Changes for the upcoming release 2.3.
|
| Fri, 13 May 2011 09:06:13 +0000 |
Sascha L. Teichmann |
Datacage: Better converter for incoming XML tree
|
| Thu, 12 May 2011 16:47:23 +0000 |
Raimund Renkert |
ISSUE 61: Changed datacage button style.
|
| Thu, 12 May 2011 15:42:37 +0000 |
Raimund Renkert |
ISSUE 46: Removed the table header context menu.
|
| Thu, 12 May 2011 15:14:09 +0000 |
Raimund Renkert |
ISSUE 43: Changed i18n strings.
|
| Thu, 12 May 2011 14:59:18 +0000 |
Raimund Renkert |
Show rivers as links instead of a combobox.
|
| Thu, 12 May 2011 09:59:29 +0000 |
Ingo Weinzierl |
ISSUE-15 The charts in the chart panel are requested with the size of the parent panel.
|
| Thu, 12 May 2011 09:14:46 +0000 |
Ingo Weinzierl |
Enabled the client to request charts in different sizes.
|
| Thu, 12 May 2011 07:08:27 +0000 |
Ingo Weinzierl |
ISSUE-34 Limit the windows which are moved to the right lower corner to 10.
|
| Wed, 11 May 2011 16:38:54 +0000 |
Sascha L. Teichmann |
Datacage: transport rpc result to ui.
|
| Wed, 11 May 2011 15:33:54 +0000 |
Ingo Weinzierl |
Changed the height of the export panel.
|
| Wed, 11 May 2011 14:34:15 +0000 |
Sascha L. Teichmann |
UI stub for data cage
|
| Wed, 11 May 2011 14:29:35 +0000 |
Ingo Weinzierl |
ISSUE-56 Display download buttons to export the computed data.
|
| Wed, 11 May 2011 14:23:08 +0000 |
Ingo Weinzierl |
Added a service to export data from the artifact server.
|
| Wed, 11 May 2011 11:44:23 +0000 |
Raimund Renkert |
ISSUE 34: Move every new project window 20 px down and right.
|
| Wed, 11 May 2011 11:07:18 +0000 |
Raimund Renkert |
ISSUE 44: Moved the location/range and WQ input tables to the helper panel and
|
| Wed, 11 May 2011 10:04:49 +0000 |
Raimund Renkert |
Set the computation result panel width and height to 100%.
|
| Wed, 11 May 2011 09:11:40 +0000 |
Ingo Weinzierl |
Parse the facets of a Collection and distinguish between an ordinary OutputMode and an ExportMode (new).
|
| Wed, 11 May 2011 07:32:08 +0000 |
Ingo Weinzierl |
ISSUE-41 Moved the panel that shows the computation results right beside the parameterization - NOTE: issue is still open.
|
| Wed, 11 May 2011 07:06:22 +0000 |
Ingo Weinzierl |
ISSUE-57 Replaced wrong i18n function call.
|
| Tue, 10 May 2011 16:49:15 +0000 |
Ingo Weinzierl |
ISSUE-48 Added placeholder for the toolbar and the theme control in the chart output tab.
|
| Tue, 10 May 2011 16:25:00 +0000 |
Ingo Weinzierl |
ISSUE-38 Set the first value of a select box as default value.
|
| Tue, 10 May 2011 16:13:16 +0000 |
Ingo Weinzierl |
Added i18n error messages used in the adapted wq panel.
|
| Tue, 10 May 2011 15:44:43 +0000 |
Raimund Renkert |
Changed the empty table message for the WQ input table.
|
| Tue, 10 May 2011 15:36:07 +0000 |
Raimund Renkert |
Changed the empty table message for helper and data tables.
|
| Tue, 10 May 2011 13:44:57 +0000 |
Sascha L. Teichmann |
Added stub for meta data service.
|
| Tue, 10 May 2011 11:37:49 +0000 |
Raimund Renkert |
Fixed the location input. A range selection sets the correct location values
|
| Tue, 10 May 2011 10:57:57 +0000 |
Raimund Renkert |
Remove the data table on step back.
|
| Tue, 10 May 2011 10:03:00 +0000 |
Raimund Renkert |
Build a dynamic table for the CSV data.
|
| Tue, 10 May 2011 06:48:46 +0000 |
Ingo Weinzierl |
Fixed attributes/namespaces in the XML document that is used to fetch the CSV export of WINFO computations.
|
| Mon, 09 May 2011 16:22:11 +0000 |
Ingo Weinzierl |
Fixed a broken dependency in the maven pom file.
|
| Mon, 09 May 2011 14:29:53 +0000 |
Raimund Renkert |
Added table and service for calculation output to UI.
|
| Mon, 09 May 2011 13:51:39 +0000 |
Ingo Weinzierl |
Added radio buttons to choose between W/Q modes in the adapted WQ panel.
|
