Tue, 14 May 2013 18:55:55 +0200 |
Andre Heinecke |
Use the out attribute everywhere where there is a factory
3.0.4
|
Tue, 14 May 2013 18:43:08 +0200 |
Andre Heinecke |
Flys is still flys for the print url
|
Tue, 14 May 2013 18:41:43 +0200 |
Andre Heinecke |
Commit performance improvement written by Sascha Teichmann
|
Tue, 14 May 2013 18:36:04 +0200 |
Andre Heinecke |
Switch W Q labels in historcial discharges
|
Tue, 14 May 2013 10:11:29 +0200 |
Felix Wolfsteller |
issue1261: when tab is created, jump navi to 'default'-km. This overcomes
|
Tue, 14 May 2013 07:53:51 +0200 |
Felix Wolfsteller |
issue1320: Handle exception.
|
Mon, 13 May 2013 18:33:01 +0200 |
Felix Wolfsteller |
PRFParser: Re-enable line skipping. Act so on station change.
|
Mon, 13 May 2013 17:58:17 +0200 |
Felix Wolfsteller |
issue1259: i18n msg when named main value not found at all gauges.
|
Mon, 13 May 2013 17:57:18 +0200 |
Felix Wolfsteller |
i18n for issue1259.
|
Mon, 13 May 2013 18:22:58 +0200 |
Tom Gottfried |
merged
|
Mon, 13 May 2013 18:21:55 +0200 |
Tom Gottfried |
backout 6009:6ea171b6d8d2 because this was only really valid for fixations
|
Mon, 13 May 2013 18:16:40 +0200 |
Sascha L. Teichmann |
Fixed wrong quote.
|
Mon, 13 May 2013 17:48:32 +0200 |
Tom Gottfried |
Schema change because WST-columns without time interval are useless
|
Mon, 13 May 2013 15:53:36 +0200 |
Tom Gottfried |
Strip non-word characters from measurement station URL
|
Mon, 13 May 2013 13:21:05 +0200 |
Tom Gottfried |
use name and type instead of ID for measurement station link
|
Mon, 13 May 2013 11:37:14 +0200 |
Felix Wolfsteller |
WQAdaptedInputPanel: Start with w tabs disabled.
|
Mon, 13 May 2013 11:15:14 +0200 |
Tom Gottfried |
merged
|
Mon, 13 May 2013 11:14:38 +0200 |
Tom Gottfried |
Importer: use gauge official number as identifier, not name
|
Mon, 13 May 2013 11:20:08 +0200 |
Felix Wolfsteller |
issue949: meta-data.xml: for additional ls, use staticwqkms factory to have w
|
Mon, 13 May 2013 11:19:14 +0200 |
Felix Wolfsteller |
WQKmsFactory: Prevent NPE this time.
|
Mon, 13 May 2013 11:16:28 +0200 |
Felix Wolfsteller |
WQKmsFactory: prevent NPE.
|
Mon, 13 May 2013 11:14:13 +0200 |
Felix Wolfsteller |
issue949: staticwqkms/W facets are active.
|
Mon, 13 May 2013 10:10:09 +0200 |
Raimund Renkert |
Updated and added missing images for interactive image map.
|
Mon, 13 May 2013 10:14:23 +0200 |
Felix Wolfsteller |
issue949: allow longitudinal_section.q facets in 'new charts'.
|
Fri, 10 May 2013 16:23:06 +0200 |
Felix Wolfsteller |
ssue862: MiddleBedHeight facet names.
|
Fri, 10 May 2013 16:12:55 +0200 |
Felix Wolfsteller |
Doc.
|
Mon, 13 May 2013 10:05:22 +0200 |
Sascha L. Teichmann |
River ETL: Limit the discharge tables to load to the historical (kind = 1) ones. This prevents the wrong tables (values) to be deleted.
|
Sun, 12 May 2013 18:13:50 +0200 |
Sascha L. Teichmann |
Removed trailing whitespace.
|
Sun, 12 May 2013 18:10:57 +0200 |
Sascha L. Teichmann |
Removed trailing whitespace.
|
Sun, 12 May 2013 18:08:41 +0200 |
Sascha L. Teichmann |
Removed trailing whitespace.
|
Sun, 12 May 2013 18:07:03 +0200 |
Sascha L. Teichmann |
Removed trailing whitespace.
|
Sun, 12 May 2013 18:04:40 +0200 |
Sascha L. Teichmann |
Removed obsolete import.
|
Sun, 12 May 2013 18:03:30 +0200 |
Sascha L. Teichmann |
River ETL: removed wrong info output that discharge tables only found in FLYS are ignored.
|
Sun, 12 May 2013 17:04:19 +0200 |
Sascha L. Teichmann |
Datacage: Removed macros which are not called.
|
Sun, 12 May 2013 16:15:37 +0200 |
Sascha L. Teichmann |
Datacage: Added stylesheet to detect macros which are defined and not called and vice versa.
|
Fri, 10 May 2013 19:30:26 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
Fri, 10 May 2013 19:29:10 +0200 |
Sascha L. Teichmann |
Be more tolerant when try to find out if a location is at a gauge position.
|
Fri, 10 May 2013 19:07:00 +0200 |
Sascha L. Teichmann |
Fixed encoding in i18n
|
Fri, 10 May 2013 19:03:48 +0200 |
Bernhard Herzog |
Use name id as username in saml.User.
|
Fri, 10 May 2013 17:44:59 +0200 |
Andre Heinecke |
Added tag 3.0.3 for changeset b740f0c4179e
|
Fri, 10 May 2013 17:14:10 +0200 |
Raimund Renkert |
Use 'W [cm]' as CSV header if discharge table is at a gauge.
3.0.3
|
Fri, 10 May 2013 16:24:38 +0200 |
Raimund Renkert |
Revert changes in metadata.xml from r5978:ebd6e8e234e0.
|
Fri, 10 May 2013 15:45:40 +0200 |
Raimund Renkert |
Avoid duplicted mainvalues.
|
Fri, 10 May 2013 15:44:48 +0200 |
Raimund Renkert |
Added mainvalues to fixanalysis wq curves.
|
Fri, 10 May 2013 15:44:01 +0200 |
Raimund Renkert |
Renamed label for outlier test in fix analysis.
|
Fri, 10 May 2013 15:23:14 +0200 |
Andre Heinecke |
Add OUT parameter to each ids parameter
|
Fri, 10 May 2013 15:16:36 +0200 |
Andre Heinecke |
Add handling for OUT id's parameter to D4EArtifact
|
Fri, 10 May 2013 11:31:51 +0200 |
Andre Heinecke |
Add dc:iterate function
|
Fri, 10 May 2013 13:26:34 +0200 |
Raimund Renkert |
Increased column number in cell formater.
|
Fri, 10 May 2013 13:23:03 +0200 |
Raimund Renkert |
Fixed typo.
|
Fri, 10 May 2013 13:22:36 +0200 |
Raimund Renkert |
Added 'bfgid' column to helper panel in hist discharge curve.
|
Fri, 10 May 2013 12:26:44 +0200 |
Sascha L. Teichmann |
Removed obsolete import.
|
Fri, 10 May 2013 12:22:56 +0200 |
Sascha L. Teichmann |
Fixed NPE problem in fetching extram from discharge curves.
|
Fri, 10 May 2013 11:41:43 +0200 |
Raimund Renkert |
Fixed typos in interactive image map.
|
Fri, 10 May 2013 11:41:09 +0200 |
Raimund Renkert |
Added available rivers for fix analysis for interactive image map.
|
Fri, 10 May 2013 11:40:31 +0200 |
Raimund Renkert |
Only select available rivers in interactive image map.
|
Fri, 10 May 2013 11:29:29 +0200 |
Felix Wolfsteller |
issue1311: Update links on toolbar when km changed.
|
Fri, 10 May 2013 11:28:50 +0200 |
Felix Wolfsteller |
NaviChartOutputTab: In prep for issue1311, override getExportUrl to include km.
|
Fri, 10 May 2013 11:28:04 +0200 |
Felix Wolfsteller |
Cosmetics.
|
Fri, 10 May 2013 10:46:56 +0200 |
Sascha L. Teichmann |
Partial rewrite of historical discharge curves. Needs testing.
|
Fri, 10 May 2013 10:02:27 +0200 |
Andre Heinecke |
Only show localized elements in getfeatureinfo
|
Fri, 10 May 2013 09:28:24 +0200 |
Andre Heinecke |
Fix print configuration, in the config flys is still flys
|
Thu, 09 May 2013 22:07:14 +0200 |
Sascha L. Teichmann |
Removed obsolete constructor.
|
Thu, 09 May 2013 15:36:39 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
Thu, 09 May 2013 15:13:41 +0200 |
Sascha L. Teichmann |
Convert some Latin-1 source files to UTF-8
|
Wed, 08 May 2013 18:23:50 +0200 |
Tom Gottfried |
merge
|
Wed, 08 May 2013 18:23:41 +0200 |
Tom Gottfried |
STA parser: more informative warning
|
Wed, 08 May 2013 18:21:27 +0200 |
Tom Gottfried |
STA parser: Spaces after gauge name given in spec are sometimes used for gauge name, so parse them
|
Wed, 08 May 2013 17:57:51 +0200 |
Bernhard Herzog |
Add AuthenticationServlet, a common base class for the login servlets
|
Wed, 08 May 2013 17:56:14 +0200 |
Bernhard Herzog |
Treat SAML URL as login URL in GGInAFilter.
|
Wed, 08 May 2013 17:56:14 +0200 |
Bernhard Herzog |
Add saml servlet to web.xml configuration.
|
Wed, 08 May 2013 17:56:14 +0200 |
Bernhard Herzog |
Add SamlServlet to implement actual login via SAML Ticket.
|
Wed, 08 May 2013 17:56:14 +0200 |
Bernhard Herzog |
Add TicketValidator.checkTicket(InputStream) method.
|
Wed, 08 May 2013 17:56:14 +0200 |
Bernhard Herzog |
Make instantiation of saml.User easier.
|
Wed, 08 May 2013 17:56:14 +0200 |
Bernhard Herzog |
Move User class from was to saml sub-package.
|
Wed, 08 May 2013 17:56:14 +0200 |
Bernhard Herzog |
Remove now unused JDom namespace constants for SAML.
|
Wed, 08 May 2013 17:56:14 +0200 |
Bernhard Herzog |
Remove now unused old Assertion class.
|
Wed, 08 May 2013 17:56:14 +0200 |
Bernhard Herzog |
Adapt WAS Response to new SAML validation code.
|
Wed, 08 May 2013 17:56:14 +0200 |
Bernhard Herzog |
Pass trusted key filename to Response in WAS Authenticator.
|
Wed, 08 May 2013 17:56:14 +0200 |
Bernhard Herzog |
Add trusted key for SAML authentication and configure it in web.xml.
|
Wed, 08 May 2013 17:56:13 +0200 |
Bernhard Herzog |
Add SAML ticket validator classes.
|
Wed, 08 May 2013 17:56:13 +0200 |
Bernhard Herzog |
Add new SAML Assertion class based on WAS Assertion.
|
Wed, 08 May 2013 17:56:13 +0200 |
Bernhard Herzog |
Add XPathUtils, helper functions to process SAML with XPath.
|
Wed, 08 May 2013 17:56:13 +0200 |
Bernhard Herzog |
Add NamespaceContext for SAML handling.
|
Wed, 08 May 2013 17:56:13 +0200 |
Bernhard Herzog |
Remove unused method Assertion.getID() and the relate field
|
Wed, 08 May 2013 17:56:13 +0200 |
Bernhard Herzog |
Remove unused method Response.getRoot()
|
Wed, 08 May 2013 17:56:13 +0200 |
Bernhard Herzog |
Remove unused Signature class.
|
Wed, 08 May 2013 17:56:13 +0200 |
Bernhard Herzog |
Remove unused Assertion.getSiganture() method and the related field
|
Wed, 08 May 2013 17:56:13 +0200 |
Bernhard Herzog |
Pass LoginServlet's ServletContext to the Authenticators.
|
Wed, 08 May 2013 17:52:54 +0200 |
Sascha L. Teichmann |
Importer: Log an error if parsing a STA file failed.
|
Wed, 08 May 2013 17:12:48 +0200 |
Sascha L. Teichmann |
Removed obsolete import.
|
Wed, 08 May 2013 17:04:49 +0200 |
Sascha L. Teichmann |
Delete discharge tables which are in AFT but not in FLYS. Fixed Oracle specific pom.xml
|
Wed, 08 May 2013 17:02:51 +0200 |
Sascha L. Teichmann |
Fixed build error. Is this really supposed to work?
|
Wed, 08 May 2013 16:34:45 +0200 |
Raimund Renkert |
Implemented interaction design in project startup page.
|
Wed, 08 May 2013 16:32:23 +0200 |
Raimund Renkert |
CSS stuff to highlight river links.
|
Wed, 08 May 2013 16:31:49 +0200 |
Raimund Renkert |
HTML document and images for interactive image map.
|
Wed, 08 May 2013 15:04:04 +0200 |
Felix Wolfsteller |
PRFParser: Ignore skip-lines field, simplifies code a bit.
|
Wed, 08 May 2013 14:58:16 +0200 |
Felix Wolfsteller |
PRFParser: Documentation.
|
Wed, 08 May 2013 13:16:29 +0200 |
Tom Gottfried |
Schema change: leave it up to AFT whether time intervals are unique per gauge but do not accept duplicate bfg_id per gauge
|
Wed, 08 May 2013 11:42:08 +0200 |
Felix Wolfsteller |
issue1267: W80CSVParser do not stumble about malformed lines.
|
Wed, 08 May 2013 10:37:25 +0200 |
Felix Wolfsteller |
issue1259: Grey out inputhelper Ws when Qs are to be chosen and vice versa.
|
Tue, 07 May 2013 15:47:07 +0200 |
Felix Wolfsteller |
Partial fix for issue862: avoid NPE.
|
Wed, 08 May 2013 09:58:52 +0200 |
Sascha L. Teichmann |
Removed obsolete artifacts.
|
Wed, 08 May 2013 09:54:51 +0200 |
Sascha L. Teichmann |
Historical discharge curve: Fixed NPE in setup.
|
Tue, 07 May 2013 19:53:48 +0200 |
Sascha L. Teichmann |
ETL: Do not ignore open ended discharge tables.
|
Tue, 07 May 2013 19:07:08 +0200 |
Sascha L. Teichmann |
Historical discharge curves: Do not add calculation relevant curve into list of available curves.
|
Tue, 07 May 2013 18:19:57 +0200 |
Tom Gottfried |
Schema change: named_main_values.name is not unique, as we can have the same name for different types
|
Tue, 07 May 2013 17:32:33 +0200 |
Sascha L. Teichmann |
D4E river artifacts: Removed historical discharge calculation from WINFO artifact and use access instead.
|
Tue, 07 May 2013 12:47:05 +0200 |
Raimund Renkert |
Added output mode and generator to config and create facet for export.
|
Tue, 07 May 2013 12:45:57 +0200 |
Raimund Renkert |
New exporter and facet for wsplgen calculation result.
|
Tue, 07 May 2013 12:31:29 +0200 |
Sascha L. Teichmann |
GWT client: Fixed flys/issue1246
|
Tue, 07 May 2013 11:33:02 +0200 |
Sascha L. Teichmann |
Discharge Info Service: Added 'bfg-id' to result document.
|
Tue, 07 May 2013 11:00:20 +0200 |
Sascha L. Teichmann |
D4E river: Fixed substitution on help URL.
|
Mon, 06 May 2013 18:53:09 +0200 |
Sascha L. Teichmann |
Merged
|
Mon, 06 May 2013 18:52:03 +0200 |
Sascha L. Teichmann |
Importer: Store id of time interval in main values.
|
Mon, 06 May 2013 18:43:13 +0200 |
Tom Gottfried |
some additions and adjustments to annotation types
|
Mon, 06 May 2013 17:53:22 +0200 |
Sascha L. Teichmann |
flys/issue1244 Historical discharge curve: Suppress current discharge curve.
|
Mon, 06 May 2013 17:42:46 +0200 |
Sascha L. Teichmann |
Historical discharge curves: Fixed NPE.
|
Mon, 06 May 2013 13:10:16 +0200 |
Tom Gottfried |
changed title and lable of SQ input-data diagramm
|
Mon, 06 May 2013 12:15:51 +0200 |
Sascha L. Teichmann |
Backend: Fixed recognition of main values in STA parser.
|
Mon, 06 May 2013 11:38:50 +0200 |
Tom Gottfried |
BHP: more informative error instead of warning if file can not be imported.
|
Fri, 03 May 2013 18:03:41 +0200 |
Andre Heinecke |
Update after renaming and remove the binary artifact-database and common
|
Fri, 03 May 2013 16:16:04 +0200 |
Andre Heinecke |
Added tag 3.0.2 for changeset 387cbdecdfe3
|
Tue, 30 Apr 2013 17:10:17 +0200 |
Andre Heinecke |
Change a warning from FLYS to D4E
3.0.2
|
Fri, 03 May 2013 13:15:28 +0200 |
Tom Gottfried |
Schema change: increased precision of discharge_table_values.q to allow unique import of higher precision values
|
Fri, 03 May 2013 13:06:14 +0200 |
Sascha L. Teichmann |
Backend: Fixed constructor of ImportTimeInterval.
|
Fri, 03 May 2013 12:51:29 +0200 |
Sascha L. Teichmann |
backend: Fixed DateGuesser for DDMMYY.
|
Fri, 03 May 2013 10:31:34 +0200 |
Tom Gottfried |
Schema change: make gauges.official_number unique per river as we can have multiple identical gauges for different representations of the same river. Comments and TODOs
|
Fri, 03 May 2013 07:47:15 +0200 |
Tom Gottfried |
Schema change: remove UNIQUE-constraint from rivers.official number as we have different representations of the same river (e.g. for sommer and winter)
|
Thu, 02 May 2013 21:23:44 +0200 |
Sascha L. Teichmann |
Datacage: Repaired and simplified dc:filter code.
|
Thu, 02 May 2013 20:55:08 +0200 |
Sascha L. Teichmann |
Merged
|
Thu, 02 May 2013 20:52:18 +0200 |
Sascha L. Teichmann |
Datacage: Introduced <dc:group epxr="xpath" type="type"> ... </dc:group> and XPath function dc:group-key().
|
Thu, 02 May 2013 18:06:04 +0200 |
Tom Gottfried |
WST-import: do not match against description (mostly NULL)
|
Thu, 02 May 2013 17:58:16 +0200 |
Sascha L. Teichmann |
Backend: Fixed indentation.
|
Thu, 02 May 2013 17:55:01 +0200 |
Sascha L. Teichmann |
Datacage: Added some time meassuremnt for templating.
|
Tue, 30 Apr 2013 19:27:15 +0200 |
Tom Gottfried |
Schema change, importer, i18n: additional field for federal state stations
|
Tue, 30 Apr 2013 19:03:44 +0200 |
Sascha L. Teichmann |
Do not import discharge tables twice if no time interval given
|
Tue, 30 Apr 2013 17:46:29 +0200 |
Sascha L. Teichmann |
datacage: simplified range filtering for wsts.
|
Tue, 30 Apr 2013 12:53:10 +0200 |
Tom Gottfried |
Schema change: add constraint to discharge tables
|
Tue, 30 Apr 2013 11:14:58 +0200 |
Tom Gottfried |
DateGuesser: set times exactly (without parts of import time)
|
Tue, 30 Apr 2013 09:15:56 +0200 |
Andre Heinecke |
Make all_annotations translateable
|
Mon, 29 Apr 2013 17:23:12 +0200 |
Sascha L. Teichmann |
Another part of flys/issue1247: Now the main values are determined right if the gauge limits are in abitrary order.
|
Mon, 29 Apr 2013 16:04:14 +0200 |
Sascha L. Teichmann |
Merged
|
Mon, 29 Apr 2013 15:54:17 +0200 |
Sascha L. Teichmann |
Partial fix for flys/issue1247: When trying to find gauges take care of the fact that start and end position are in abitrary order.
|
Mon, 29 Apr 2013 13:42:20 +0200 |
Tom Gottfried |
document how to read schema with correct encoding
|
Mon, 29 Apr 2013 11:42:15 +0200 |
Sascha L. Teichmann |
river backend: Removed obsolete hibernate transformer class.
|
Mon, 29 Apr 2013 11:40:38 +0200 |
Sascha L. Teichmann |
river backend: repaired invalid packages.
|
Mon, 29 Apr 2013 11:37:30 +0200 |
Sascha L. Teichmann |
river backend: Adjusted internal references to SedDB hibernate model.
|
Mon, 29 Apr 2013 11:33:01 +0200 |
Sascha L. Teichmann |
river backend: Moved SedDB hibernate model to org/dive4elements/river/seddb.
|
Mon, 29 Apr 2013 11:14:25 +0200 |
Sascha L. Teichmann |
init.d: Adjusted startup script.
|
Sun, 28 Apr 2013 15:55:52 +0200 |
Sascha L. Teichmann |
River GWT client: Removed obsolete same package imports.
|
Sun, 28 Apr 2013 15:38:01 +0200 |
Sascha L. Teichmann |
River backend: Removed obsolete same package imports.
|
Sun, 28 Apr 2013 15:33:42 +0200 |
Sascha L. Teichmann |
River artifacts: Removed obsolete same package imports.
|
Sun, 28 Apr 2013 15:26:59 +0200 |
Sascha L. Teichmann |
River artifacts: Renamed FLYSService to D4EService.
|
Sun, 28 Apr 2013 15:23:01 +0200 |
Sascha L. Teichmann |
River artifacts: Renamed FLYSArtifact(Collection) to D4EArtifact(Collection).
|
Sun, 28 Apr 2013 15:14:30 +0200 |
Sascha L. Teichmann |
FLYS artifacts: Renamed FLYSContext(Factory) to RiverContext(Factory).
|
Sun, 28 Apr 2013 15:09:31 +0200 |
Sascha L. Teichmann |
River artifacts: Renamed FLYSUtils to RiverUtils.
|
Sun, 28 Apr 2013 15:04:44 +0200 |
Sascha L. Teichmann |
River artifacts: Renamed FLYSAnnotation to RiverAnnotation.
|
Sun, 28 Apr 2013 14:40:59 +0200 |
Sascha L. Teichmann |
River artifacts: Added new copyright headers.
|
Sun, 28 Apr 2013 14:38:44 +0200 |
Sascha L. Teichmann |
Removed old copyright headers.
|
Sun, 28 Apr 2013 14:30:15 +0200 |
Sascha L. Teichmann |
GWT client: Added copyright header.
|
Sun, 28 Apr 2013 14:27:25 +0200 |
Sascha L. Teichmann |
GWT client: Removed old header.
|
Sun, 28 Apr 2013 13:45:22 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
Sun, 28 Apr 2013 12:03:19 +0200 |
Sascha L. Teichmann |
River ETL: Harmonized maven ids. Adjusted README
|
Sun, 28 Apr 2013 11:56:54 +0200 |
Sascha L. Teichmann |
Backend: Fixed Oracle pom.xml and README.
|
Fri, 26 Apr 2013 19:12:13 +0200 |
Tom Gottfried |
it's worth more than a warning if the import is likely to fail
|
Fri, 26 Apr 2013 18:13:58 +0200 |
Tom Gottfried |
adjust importer build-script to new names
|
Fri, 26 Apr 2013 16:50:14 +0200 |
Tom Gottfried |
Schema change: new column 'waterbody' for floodmaps and importer
|
Fri, 26 Apr 2013 15:04:22 +0200 |
Tom Gottfried |
Localization of field names for feature info on map
|
Fri, 26 Apr 2013 13:13:23 +0200 |
Tom Gottfried |
merge
|
Fri, 26 Apr 2013 13:12:29 +0200 |
Tom Gottfried |
use correct attribute name STROVOER also for polygon boundaries
|
Fri, 26 Apr 2013 11:08:58 +0200 |
Felix Wolfsteller |
Wst: Avoid NPE.
|
Fri, 26 Apr 2013 11:06:55 +0200 |
Felix Wolfsteller |
Make showing of outlier facet depending on preprocessing choice.
|
Fri, 26 Apr 2013 11:04:48 +0200 |
Felix Wolfsteller |
issue949: Have W facets active, Q inactive.
|
Fri, 26 Apr 2013 11:03:43 +0200 |
Felix Wolfsteller |
Map fix wq points to FixPoints style.
|
Fri, 26 Apr 2013 11:02:57 +0200 |
Felix Wolfsteller |
issue949: Have fixations in longitudinal-sections have W and Q facet.
|
Fri, 26 Apr 2013 08:52:18 +0200 |
Tom Gottfried |
Importer-Parser: set time intevals for complete years when parsing years
|
Fri, 26 Apr 2013 08:25:41 +0200 |
Sascha L. Teichmann |
Added header to river backend.
|
Thu, 25 Apr 2013 19:26:20 +0200 |
Andre Heinecke |
Use gwt-client as artifactid
|
Thu, 25 Apr 2013 16:57:56 +0200 |
Andre Heinecke |
Remove duplicated dependency to jfreechart
|
Thu, 25 Apr 2013 17:06:50 +0200 |
Sascha L. Teichmann |
Added header to Java files in ETL process.
|
Thu, 25 Apr 2013 16:00:10 +0200 |
Sascha L. Teichmann |
Fixed broken maven ids ... again.
|
Thu, 25 Apr 2013 15:25:07 +0200 |
Sascha L. Teichmann |
Adjusted hgignore
|
Thu, 25 Apr 2013 15:23:37 +0200 |
Sascha L. Teichmann |
Rename modules to more fitting names.
|
Thu, 25 Apr 2013 15:06:21 +0200 |
Sascha L. Teichmann |
Added tag dive4elements-move for changeset 795218cf62eb
|
Thu, 25 Apr 2013 15:05:41 +0200 |
Sascha L. Teichmann |
Adjusted client pom.xml to let it build again.
dive4elements-move
|
Thu, 25 Apr 2013 13:12:15 +0200 |
Sascha L. Teichmann |
Fixed internal java dependencies
|
Thu, 25 Apr 2013 12:31:32 +0200 |
Sascha L. Teichmann |
Repaired internal references.
|
Thu, 25 Apr 2013 12:26:40 +0200 |
Sascha L. Teichmann |
Adjusted configs to new classes.
|
Thu, 25 Apr 2013 12:25:11 +0200 |
Sascha L. Teichmann |
Repair pom.xml
|
Thu, 25 Apr 2013 12:06:39 +0200 |
Sascha L. Teichmann |
Repaired internal references
|
Thu, 25 Apr 2013 12:01:30 +0200 |
Sascha L. Teichmann |
Repaired pom.xml
|