| Tue, 23 Sep 2014 10:11:52 +0200 |
Tom Gottfried |
Put all macros for wst-data in one place and reduce code duplications.
|
| Mon, 22 Sep 2014 18:17:47 +0200 |
Tom Gottfried |
Remove duplications from discharge prototypes and put it all together.
|
| Mon, 22 Sep 2014 17:11:20 +0200 |
Raimund Renkert |
merged.
|
| Mon, 22 Sep 2014 17:10:23 +0200 |
Raimund Renkert |
Added injector for PNP.
|
| Mon, 22 Sep 2014 17:08:48 +0200 |
Raimund Renkert |
Updated the client to build a default artifact for gauge discharge curve.
|
| Mon, 22 Sep 2014 17:05:37 +0200 |
Raimund Renkert |
Configured gauge discharge curve to use a default D4EArtifact and two states to hold the parameters and outs.
|
| Fri, 19 Sep 2014 16:29:11 +0200 |
Tom Gottfried |
Classify and sort iteration over user-data non-recommendations.
|
| Fri, 19 Sep 2014 16:07:59 +0200 |
Tom Gottfried |
Classify and sort iteration over non-recommendations.
|
| Fri, 19 Sep 2014 15:45:54 +0200 |
Tom Gottfried |
Classify and sort iteration over recommendations.
|
| Fri, 19 Sep 2014 15:31:03 +0200 |
Tom Gottfried |
Purge clash of out-names, resulting hacks and tests for not existing outs and give some more meaningful names.
|
| Fri, 19 Sep 2014 09:49:09 +0200 |
Tom Gottfried |
Official sedimentload epochs should be seperated from other data in datacage.
|
| Thu, 18 Sep 2014 18:41:14 +0200 |
Tom Gottfried |
These meta-lines had been invented before.
|
| Thu, 18 Sep 2014 18:16:51 +0200 |
Tom Gottfried |
At least since rev eb052d759fcc, there are no bed height epochs anymore.
|
| Wed, 17 Sep 2014 19:46:19 +0200 |
Tom Gottfried |
Added tag 3.1.6 for changeset 301a32bd7045
|
| Wed, 17 Sep 2014 19:28:39 +0200 |
Tom Gottfried |
Though not yet part of the calculation, suspended load has to be optionally loadable through datacage.
3.1.6
|
| Wed, 17 Sep 2014 17:56:37 +0200 |
Tom Gottfried |
Set facet activity for middle bed height.
|
| Wed, 17 Sep 2014 17:35:36 +0200 |
Tom Gottfried |
Add theme for porosity and sync second with default.
|
| Wed, 17 Sep 2014 17:13:48 +0200 |
Tom Gottfried |
In case the list is not ordered, in the end diagrams might look weird.
|
| Wed, 17 Sep 2014 13:24:13 +0200 |
Tom Gottfried |
Consider new SQ-diagrams in datacage config.
|
| Wed, 17 Sep 2014 13:12:12 +0200 |
Tom Gottfried |
Essentially backout rev 8ad0b7bc3e73 as this makes some SQ-relation curves appear buckled.
|
| Wed, 17 Sep 2014 13:00:14 +0200 |
Tom Gottfried |
Avoid NPE if river is not accessible.
|
| Wed, 17 Sep 2014 12:32:24 +0200 |
Raimund Renkert |
merged.
|
| Wed, 17 Sep 2014 12:32:01 +0200 |
Raimund Renkert |
Fixed style for sq relation link in measurement station info grid.
|
| Wed, 17 Sep 2014 09:22:50 +0200 |
Tom Gottfried |
i18n is meant for translation and unfortunately the client has three files for that.
|
| Wed, 17 Sep 2014 09:04:30 +0200 |
Raimund Renkert |
merged.
|
| Wed, 17 Sep 2014 09:03:39 +0200 |
Raimund Renkert |
Avoid NPE in discharge context injector if no start km was set.
|
| Wed, 17 Sep 2014 09:02:44 +0200 |
Raimund Renkert |
Added themes for new fraction in sq relation.
|
| Wed, 17 Sep 2014 09:01:27 +0200 |
Raimund Renkert |
Added new fraction to sq relation.
|
| Tue, 16 Sep 2014 18:48:34 +0200 |
Tom Gottfried |
Outs might be set in the client.
|
| Tue, 16 Sep 2014 18:33:46 +0200 |
Tom Gottfried |
Crude script to find non-existant outs in meta-data.xml
|
| Tue, 16 Sep 2014 16:10:30 +0200 |
Tom Gottfried |
Update comment on conditional loading of user content.
|
| Tue, 16 Sep 2014 14:57:55 +0200 |
Raimund Renkert |
merged.
|
| Tue, 16 Sep 2014 14:57:14 +0200 |
Raimund Renkert |
The default state is no more abstract.
|
| Tue, 16 Sep 2014 12:12:06 +0200 |
Tom Gottfried |
Set facet activity for bed quality.
|
| Tue, 16 Sep 2014 11:33:08 +0200 |
Tom Gottfried |
Add metadata to bedheight facets in bed height differences.
|
| Mon, 15 Sep 2014 15:38:16 +0200 |
Sascha L. Teichmann |
Adopt configuation of artifacts into new xml documents to make them configurable inline.
|
| Mon, 15 Sep 2014 15:00:48 +0200 |
Tom Gottfried |
Purge some duplicated logging an misleading comments.
|
| Mon, 15 Sep 2014 11:58:31 +0200 |
Tom Gottfried |
Call orphaned macro originating from 'fix_wq_curve' in prototype.
|
| Mon, 15 Sep 2014 11:26:48 +0200 |
Tom Gottfried |
Make use of publicly available external WMS (Pegelonline) otherwise called from BfG-specific macro.
|
| Fri, 12 Sep 2014 19:09:24 +0200 |
Tom Gottfried |
Remove call of BfG-specific macro.
|
| Fri, 12 Sep 2014 19:00:45 +0200 |
Tom Gottfried |
A bit less chaos in i18n for bed heights.
|
| Fri, 12 Sep 2014 14:56:49 +0200 |
Raimund Renkert |
merged.
|
| Fri, 12 Sep 2014 14:56:22 +0200 |
Raimund Renkert |
Added themes for SQ relation overview chart.
|
| Fri, 12 Sep 2014 14:55:42 +0200 |
Raimund Renkert |
SQ relation overview is now a single chart containing all fractions.
|
| Fri, 12 Sep 2014 13:12:25 +0200 |
Sascha L. Teichmann |
Added discharge curve prototye.
|
| Fri, 12 Sep 2014 08:42:41 +0200 |
Raimund Renkert |
Fixed location distance panel. TODO: Switch to location table and select tabs.
|
| Fri, 12 Sep 2014 08:39:10 +0200 |
Raimund Renkert |
Fixed multi period panel in fix analysis.
|
| Thu, 11 Sep 2014 17:37:03 +0200 |
Tom Gottfried |
Making i18n work was just easier using less wrappers in this case (issue1631).
|
| Thu, 11 Sep 2014 16:12:39 +0200 |
Tom Gottfried |
Measurement stations without range should not be used in calculation and we assume the beginning of the range is the station.
|
| Thu, 11 Sep 2014 14:45:17 +0200 |
Tom Gottfried |
Suspended sand is part of total load.
|
| Thu, 11 Sep 2014 11:23:10 +0200 |
Raimund Renkert |
merged.
|
| Thu, 11 Sep 2014 11:22:38 +0200 |
Raimund Renkert |
Fixed date range panel in fix analysis.
|
| Wed, 10 Sep 2014 12:45:35 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
| Wed, 10 Sep 2014 12:42:39 +0200 |
Sascha L. Teichmann |
Made call context injectors a list of comma separated classes.
|
| Wed, 10 Sep 2014 10:02:46 +0200 |
Raimund Renkert |
merged.
|
| Wed, 10 Sep 2014 10:01:57 +0200 |
Raimund Renkert |
Added injectors to config and moved subtitle conf.
|
| Wed, 10 Sep 2014 10:01:11 +0200 |
Raimund Renkert |
Added context injectors for discharge curves.
|
| Tue, 09 Sep 2014 20:08:12 +0200 |
Tom Gottfried |
Added tag 3.1.5 for changeset d81c4b0d5ca7
|
| Tue, 09 Sep 2014 19:05:08 +0200 |
Tom Gottfried |
Write CSV-header only once.
3.1.5
|
| Tue, 09 Sep 2014 18:41:11 +0200 |
Tom Gottfried |
Fix duration curve i18n.
|
| Tue, 09 Sep 2014 17:05:21 +0200 |
Tom Gottfried |
Some i18n completion in hist. discharge curves.
|
| Tue, 09 Sep 2014 16:29:53 +0200 |
Tom Gottfried |
Enable dynamic zoom-range in subtitle.
|
| Tue, 09 Sep 2014 14:53:12 +0200 |
Tom Gottfried |
Patch build from given date not available anymore.
|
| Tue, 09 Sep 2014 13:49:28 +0200 |
Tom Gottfried |
We well want to average NaNs but want to know the cause of the result being NaN.
|
| Tue, 09 Sep 2014 12:03:46 +0200 |
Tom Gottfried |
Suggestion: sort measurement stations along the river and only along the river.
|
| Tue, 09 Sep 2014 11:13:37 +0200 |
Andre Heinecke |
(issue1448) Fix info service for epoch / periods and off epoch
|
| Tue, 09 Sep 2014 10:53:50 +0200 |
Tom Gottfried |
Suggestion: Load official epochs via recommendations instead of a pseudo-calculation.
|
| Mon, 08 Sep 2014 19:48:17 +0200 |
Andre Heinecke |
(issue1448) Actually filter out not matching sq_time_interval_ids
|
| Mon, 08 Sep 2014 19:47:01 +0200 |
Andre Heinecke |
(issue1448) Objectify sq_time_interval id.
|
| Mon, 08 Sep 2014 19:01:26 +0200 |
Andre Heinecke |
(issue1448) Finally use the sq time interval as filter in the calculation.
|
| Mon, 08 Sep 2014 19:00:30 +0200 |
Andre Heinecke |
(issue1448) Unify SedimentLoadData ctor again
|
| Mon, 08 Sep 2014 18:59:10 +0200 |
Andre Heinecke |
(issue1448) Add Sq time interval to sediment load accessor
|
| Mon, 08 Sep 2014 18:31:17 +0200 |
Andre Heinecke |
(issue1448) Look through all the data for sq_ti_id in following states.
|
| Mon, 08 Sep 2014 17:52:52 +0200 |
Andre Heinecke |
(issue1448) Carry sq_ti_date in artifact description anf fix sqtipanel
|
| Mon, 08 Sep 2014 17:50:10 +0200 |
Andre Heinecke |
(issue1448) Use correct data name for ti_id and carry string value of selected date.
|
| Mon, 08 Sep 2014 16:24:50 +0200 |
Andre Heinecke |
(issue1448) In a list of one element. Select the only element.
|
| Mon, 08 Sep 2014 16:24:16 +0200 |
Andre Heinecke |
(issue1448) Add Panel for new sq_ti_select state
|
| Mon, 08 Sep 2014 16:23:38 +0200 |
Andre Heinecke |
(issue1448) Extend SedimentLoadInfo request to handle sq time intervals
|
| Mon, 08 Sep 2014 16:21:26 +0200 |
Andre Heinecke |
(issue1448) Extend SL info service to handle sq_time_intervals
|
| Mon, 08 Sep 2014 16:19:15 +0200 |
Andre Heinecke |
(issue1448) Fix return values of SQ time interval accessors
|
| Mon, 08 Sep 2014 16:18:37 +0200 |
Andre Heinecke |
(issue1448) Add l10n for new sq time interval state.
|
| Mon, 08 Sep 2014 16:17:59 +0200 |
Andre Heinecke |
(issue1448) Add SQ Time interval select state
|
| Mon, 08 Sep 2014 16:14:43 +0200 |
Sascha L. Teichmann |
Pass request document to the context injectors.
|
| Mon, 08 Sep 2014 16:06:50 +0200 |
Sascha L. Teichmann |
Merged.
|
| Mon, 08 Sep 2014 16:06:34 +0200 |
Sascha L. Teichmann |
Made it compile with changed ContextInjector interface again.
|
| Mon, 08 Sep 2014 15:54:12 +0200 |
Tom Gottfried |
Let official epochs be showy and remove detritus of 'yields' in datacage config.
|
| Mon, 08 Sep 2014 15:48:11 +0200 |
Sascha L. Teichmann |
Call context inspector in output helper.
|
| Mon, 08 Sep 2014 13:33:39 +0200 |
Sascha L. Teichmann |
Stop stupid propagation of out subtype in generators. What is this? It is not used anyway.
|
| Mon, 08 Sep 2014 13:17:49 +0200 |
Sascha L. Teichmann |
Added context injector to generators.
|
| Mon, 08 Sep 2014 12:28:16 +0200 |
Sascha L. Teichmann |
Merged
|
| Mon, 08 Sep 2014 12:27:55 +0200 |
Sascha L. Teichmann |
Anti programming: Throw CrossSectionApp away. Not useful ATM. The backing data structures are fine now and the original purpose of the app was to figure them out.
|
| Mon, 08 Sep 2014 12:25:47 +0200 |
Tom Gottfried |
We only need to know what's going on upstream.
|
| Mon, 08 Sep 2014 12:21:32 +0200 |
Tom Gottfried |
Fetch missing values from database and show them in diagrams.
|
| Mon, 08 Sep 2014 10:03:00 +0200 |
Tom Gottfried |
Allow fractions without SQ-time interval (suspended sediment) to be loaded.
|
| Fri, 05 Sep 2014 20:57:31 +0200 |
Tom Gottfried |
Error reports for sediment load calculation.
|
| Fri, 05 Sep 2014 19:30:50 +0200 |
Andre Heinecke |
Do not inherit smartgwt include the javascript directly in FLYS.html
superdev
|
| Fri, 05 Sep 2014 19:29:11 +0200 |
Andre Heinecke |
Update GWT to 2.6.1
superdev
|
| Fri, 05 Sep 2014 15:09:44 +0200 |
Andre Heinecke |
(issue1448) Use left join to permit loads with empty sq_time intervals to be handled.
|
| Fri, 05 Sep 2014 18:30:20 +0200 |
Sascha L. Teichmann |
Fixed broken build.
|
| Fri, 05 Sep 2014 18:23:36 +0200 |
Sascha L. Teichmann |
Sediment load: converted grain fraction name to an array lookup.
|
| Fri, 05 Sep 2014 16:54:45 +0200 |
Raimund Renkert |
Added new processor for fix derived curve.
|
| Fri, 05 Sep 2014 15:57:39 +0200 |
Raimund Renkert |
Added processor for discharge curve in fixanalysis.
|
| Fri, 05 Sep 2014 15:26:40 +0200 |
Tom Gottfried |
Do not return pure NaN data.
|
| Fri, 05 Sep 2014 14:53:58 +0200 |
Tom Gottfried |
Sediment loads at measurement stations and longitudinal sections need different processing and styling for diagrams.
|
| Fri, 05 Sep 2014 13:19:22 +0200 |
Sascha L. Teichmann |
sed 's/logger/log/g' src/**/*.java
|
| Fri, 05 Sep 2014 12:58:17 +0200 |
Sascha L. Teichmann |
sed src/**/*.java 's/logger/log/g'
|
| Fri, 05 Sep 2014 12:54:58 +0200 |
Sascha L. Teichmann |
Make it compile again.
|
| Fri, 05 Sep 2014 12:50:33 +0200 |
Sascha L. Teichmann |
sed -i src/**/*.java 's/logger/log/g'
|
| Fri, 05 Sep 2014 12:22:42 +0200 |
Andre Heinecke |
(issue1448) Add sq time intervals to sediment load data model.
|
| Fri, 05 Sep 2014 12:19:13 +0200 |
Sascha L. Teichmann |
Forget to adjust a string reference to a moved backend utils class.
|
| Fri, 05 Sep 2014 10:27:50 +0200 |
Sascha L. Teichmann |
Anti programming: Removed obsolete classes in client. This may break stuff because of the GWT magic.
|
| Fri, 05 Sep 2014 10:10:42 +0200 |
Sascha L. Teichmann |
Find obsolete Java files in more than one project hierachie.
|
| Fri, 05 Sep 2014 10:09:16 +0200 |
Sascha L. Teichmann |
Anti programming: Removed TIM parser which ist not needed any longer.
|
| Thu, 04 Sep 2014 17:47:32 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
| Thu, 04 Sep 2014 17:33:01 +0200 |
Tom Gottfried |
Sum up fractions from stations and previous stations according to respective validity model.
|
| Thu, 04 Sep 2014 16:25:06 +0200 |
Sascha L. Teichmann |
Add Q'n'D Python script to find obsolete Java files.
|
| Thu, 04 Sep 2014 15:48:48 +0200 |
Sascha L. Teichmann |
merged
|
| Thu, 04 Sep 2014 15:43:13 +0200 |
Sascha L. Teichmann |
Anti programming.
|
| Thu, 04 Sep 2014 15:27:47 +0200 |
Raimund Renkert |
merged.
|
| Thu, 04 Sep 2014 15:26:55 +0200 |
Raimund Renkert |
Use processors for historical discharge curves.
|
| Thu, 04 Sep 2014 15:03:25 +0200 |
Sascha L. Teichmann |
Moved package org.dive4elements.river.utils to org.dive4elements.river.backend.utils.
|
| Thu, 04 Sep 2014 13:00:55 +0200 |
Sascha L. Teichmann |
Removed NASTY package clash. We had too org.dive4elements.river.util packages.
|
| Thu, 04 Sep 2014 12:03:02 +0200 |
Tom Gottfried |
Removed obsolete average and renamed some symbols to make the difference between single fractions and sums of them clearer in the calculation.
|
| Thu, 04 Sep 2014 12:00:17 +0200 |
Sascha L. Teichmann |
Remove dead class.
|
| Thu, 04 Sep 2014 11:15:34 +0200 |
Raimund Renkert |
merged.
|
| Thu, 04 Sep 2014 11:14:24 +0200 |
Raimund Renkert |
Changed discharge processor to plot only discharge curves and added processor for computed discharge curves.
|
| Thu, 04 Sep 2014 11:10:37 +0200 |
Raimund Renkert |
Added new processor to plot misc discharge data, e.g. from datacage or recommendations.
|
| Wed, 03 Sep 2014 18:21:35 +0200 |
Tom Gottfried |
The existing implementation respects the fact that months are 0-based.
|
