Mercurial > dive4elements > river

log

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
less more | rev 747: (0) -240 +240 +1000 +3000 tip
age author description
Mon, 27 Jun 2011 13:58:03 +0000 Sascha L. Teichmann ATWriter: Fixed array size to construct spline with stricly increasing values.
Mon, 27 Jun 2011 10:24:54 +0000 Ingo Weinzierl Prepared Changes for the upcoming release.
Mon, 27 Jun 2011 09:42:21 +0000 Sascha L. Teichmann Fix for flys/issue150: Invert the x axis if its guessed that water is increasing.
Mon, 27 Jun 2011 09:17:41 +0000 Sascha L. Teichmann WQ: Added a method to guess is increasing.
Mon, 27 Jun 2011 07:45:32 +0000 Ingo Weinzierl #177 Commented out the code that generates the series names in discharge curves. This code currently generates memory problems and stops the server accepting new http requests.
Sun, 26 Jun 2011 17:18:59 +0000 Sascha L. Teichmann Removed trailing whitespace.
Sun, 26 Jun 2011 17:06:35 +0000 Sascha L. Teichmann Removed dead code.
Sun, 26 Jun 2011 16:40:35 +0000 Sascha L. Teichmann Forgot to check in last ChangeLog change.
Sun, 26 Jun 2011 16:19:02 +0000 Sascha L. Teichmann Fix for flys/issue173
Sun, 26 Jun 2011 14:46:48 +0000 Sascha L. Teichmann Fix for flys/issue147
Sun, 26 Jun 2011 13:07:44 +0000 Sascha L. Teichmann Fix for flys/issue86
Sun, 26 Jun 2011 10:33:38 +0000 Sascha L. Teichmann Fix for flys/issue86
Sat, 25 Jun 2011 17:35:50 +0000 Sascha L. Teichmann Fixed "W am Pegel" calculations.
Fri, 24 Jun 2011 12:05:13 +0000 Ingo Weinzierl #174 Longitudinal section charts will now have an upper margin again.
Fri, 24 Jun 2011 09:49:27 +0000 Ingo Weinzierl #172 Charts of type duration curve will now have a lower X set to '0'.
Thu, 23 Jun 2011 21:44:24 +0000 Sascha L. Teichmann ATWriter: Results are now in cm. Made it more robust against corner cases.
Thu, 23 Jun 2011 17:22:17 +0000 Sascha L. Teichmann Added generation and configuration of AT facets.
Thu, 23 Jun 2011 16:45:48 +0000 Sascha L. Teichmann Added exporter for AT facets.
Thu, 23 Jun 2011 15:50:44 +0000 Sascha L. Teichmann New AT writer for results.
Thu, 23 Jun 2011 13:42:47 +0000 Ingo Weinzierl #157 Both types of discharge curves will now include the '0' value on the x-axis.
Thu, 23 Jun 2011 12:39:59 +0000 Sascha L. Teichmann WQDay is based on WQ now to make it exportable as AT.
Thu, 23 Jun 2011 12:19:12 +0000 Sascha L. Teichmann Added base class WQ for WQKms.
Thu, 23 Jun 2011 08:58:30 +0000 Sascha L. Teichmann Corrected configuration for error reports.
Wed, 22 Jun 2011 14:47:22 +0000 Ingo Weinzierl #164 Create the items for the adapted WQ state with range information for W and Q.
Wed, 22 Jun 2011 10:54:30 +0000 Sascha L. Teichmann "Abflusskurve am Pegel" looks correct again.
Wed, 22 Jun 2011 10:36:27 +0000 Sascha L. Teichmann Improved situtation on rendering "Abflusskurve am Pegel". Not fully working, yet.
Wed, 22 Jun 2011 09:19:16 +0000 Sascha L. Teichmann Generate facets for "Abflusskurven am Pegel". Not working by now. :-/
Wed, 22 Jun 2011 06:51:36 +0000 Ingo Weinzierl #161 Include the 0 on the second y axis (the Q axis) in longitudinal section charts intially.
Tue, 21 Jun 2011 21:41:49 +0000 Sascha L. Teichmann Draw correction curve again.
Tue, 21 Jun 2011 18:10:49 +0000 Ingo Weinzierl #157 Computed discharge curve charts always have a lower bound set to 0.
Tue, 21 Jun 2011 17:39:29 +0000 Ingo Weinzierl #90 Added a margin between chart data and chart axes to avoid displaying curves on the chart border.
Tue, 21 Jun 2011 17:03:46 +0000 Sascha L. Teichmann Fix for flys/issue158
Tue, 21 Jun 2011 16:31:19 +0000 Sascha L. Teichmann Fix for flys/issue154
Tue, 21 Jun 2011 16:22:28 +0000 Sascha L. Teichmann Only generate 'outs' if they have facets.
Tue, 21 Jun 2011 14:33:00 +0000 Ingo Weinzierl Put the time-to-live of the collection into its DESCRIBE document.
Mon, 20 Jun 2011 14:36:42 +0000 Sascha L. Teichmann Configured states to generate report facets.
Mon, 20 Jun 2011 14:14:20 +0000 Sascha L. Teichmann Generate report facets if there are problems with the calculations.
Mon, 20 Jun 2011 13:47:59 +0000 Sascha L. Teichmann Added generator and facet for error reports.
Mon, 20 Jun 2011 12:32:32 +0000 Sascha L. Teichmann New model to transport data and error reports of calculations.
Sat, 18 Jun 2011 20:20:34 +0000 Sascha L. Teichmann Added calculation "am Pegel" version to the "Wasserspiegellage" calculation.
Sat, 18 Jun 2011 18:38:04 +0000 Sascha L. Teichmann Removed more dead code.
Sat, 18 Jun 2011 18:19:34 +0000 Sascha L. Teichmann Removed dead code.
Sat, 18 Jun 2011 17:03:17 +0000 Sascha L. Teichmann Only generate facets when needed.
Fri, 17 Jun 2011 16:17:03 +0000 Sascha L. Teichmann Merged revisions 2127-2133,2136-2137,2140,2143-2144,2146,2150-2151,2153-2154 via svnmerge from
Fri, 17 Jun 2011 14:37:09 +0000 Sascha L. Teichmann Generate data facets for the computed states. facets-slt
Fri, 17 Jun 2011 14:03:29 +0000 Sascha L. Teichmann Add facet to access raw computed data. facets-slt
Fri, 17 Jun 2011 13:45:50 +0000 Sascha L. Teichmann Base WST/CSV exports on facets. TODO: generate the facets. facets-slt
Fri, 17 Jun 2011 13:10:20 +0000 Sascha L. Teichmann call computeAdvance() if we want to advance. facets-slt
Fri, 17 Jun 2011 11:23:57 +0000 Sascha L. Teichmann mico opt: inter cmps are faster than str cmps. facets-slt
Fri, 17 Jun 2011 11:08:31 +0000 Sascha L. Teichmann make getGauges() more robust facets-slt
Fri, 17 Jun 2011 10:40:54 +0000 Sascha L. Teichmann Removed ComputeCallback because this was thought too complicated. Fixed issue with facets not be re-generated if same state is entered again. facets-slt
Fri, 17 Jun 2011 09:19:43 +0000 Ingo Weinzierl OutGenerators use now facets to fetch necessary data. facets-slt
Thu, 16 Jun 2011 14:31:41 +0000 Ingo Weinzierl OutGenerators doOut() takes a facet object now instead of just its name. facets-slt
Thu, 16 Jun 2011 14:10:49 +0000 Ingo Weinzierl Add index and description of facets to collections describe document. facets-slt
Thu, 16 Jun 2011 13:24:00 +0000 Ingo Weinzierl Write computed facets into artifacts describe document. facets-slt
Thu, 16 Jun 2011 10:05:44 +0000 Ingo Weinzierl Generated facets for each output aspect. facets-slt
Thu, 16 Jun 2011 09:04:59 +0000 Ingo Weinzierl Store facets for each state. facets-slt
Thu, 16 Jun 2011 08:57:05 +0000 Ingo Weinzierl Use enums to dispatch computeFeed() and computeAdvance(). facets-slt
Thu, 16 Jun 2011 08:43:58 +0000 Ingo Weinzierl Added two more compute() methods to ComputeCallback to distinguish between different phases of the artifact. facets-slt
Thu, 16 Jun 2011 08:25:06 +0000 Ingo Weinzierl Moved Waterlevel state into the correct package. facets-slt
Thu, 16 Jun 2011 07:50:56 +0000 Ingo Weinzierl Added a compute() method to WINFOArtifact which acts as a dispatcher for different computations. It triggers a calculation based on ComputeCallbacks that are generated by the current states. facets-slt
Wed, 15 Jun 2011 15:28:54 +0000 Ingo Weinzierl Merged with trunk and introduced hashing of computed values. facets-slt
Fri, 17 Jun 2011 13:00:54 +0000 Ingo Weinzierl Added a parameter 'wq_free' that determines that mode of calculation 1 (specifies if the calculation is bound to a gauge or not).
Fri, 17 Jun 2011 12:38:41 +0000 Ingo Weinzierl DischargeLongitudinalSectionCurve will have corrected W facets now.
Tue, 14 Jun 2011 16:26:59 +0000 Sascha L. Teichmann DistanceInfoService: Got rid of namespace in result document.
Tue, 14 Jun 2011 15:34:27 +0000 Ingo Weinzierl #77 The curves in a duration chart will have names now.
Tue, 14 Jun 2011 13:54:19 +0000 Ingo Weinzierl The min/max W/Q ranges in the panel for calculation4 are written into the DESCRIBE.
Tue, 14 Jun 2011 13:53:25 +0000 Sascha L. Teichmann Write top 'Oberkante' and bottom 'Unterkante' to out going XML if they exist.
Tue, 14 Jun 2011 10:38:00 +0000 Ingo Weinzierl The state that is used to enter locations writes the river's range into the DESCRIBE now.
Fri, 10 Jun 2011 15:59:47 +0000 Sascha L. Teichmann Added error reporting to 'Wasserspiegellage' calculation.
Fri, 10 Jun 2011 14:24:15 +0000 Sascha L. Teichmann Added error reporting to 'Abflusskurve' calculation.
Fri, 10 Jun 2011 12:38:08 +0000 Sascha L. Teichmann Added error reporting to 'Dauerzahlen' calculation.
Fri, 10 Jun 2011 10:10:04 +0000 Sascha L. Teichmann Added methods to remove NaN values.
Fri, 10 Jun 2011 09:19:27 +0000 Sascha L. Teichmann Added calculation base class to collect the problems during the calculations. Adjusted calculation 4 to use the mechanism.
Thu, 09 Jun 2011 10:48:13 +0000 Ingo Weinzierl Changed the zoom process - the values in the chart request document are percentual values that apply to every axis.
Thu, 09 Jun 2011 10:31:22 +0000 Ingo Weinzierl Corrected axes/datasets mappings.
Wed, 08 Jun 2011 19:11:18 +0000 Sascha L. Teichmann Berechnung 4: Determine the gauges by their station position. This hopefully fixes segment assignment problems.
Wed, 08 Jun 2011 18:50:40 +0000 Sascha L. Teichmann Berechnung 4: Added more debug output
Wed, 08 Jun 2011 13:57:43 +0000 Ingo Weinzierl #103 PART 1: The numbers which are written into the static DESCRIBE part are i18n formatted now.
Wed, 08 Jun 2011 13:32:56 +0000 Ingo Weinzierl #93 Changed the name of calculation type 4.
Wed, 08 Jun 2011 13:03:21 +0000 Ingo Weinzierl Made the chart range determination more robust against NaN values.
Wed, 08 Jun 2011 12:35:44 +0000 Ingo Weinzierl Set the second y axis to axis position 1 (starts at 0).
Wed, 08 Jun 2011 10:25:39 +0000 Sascha L. Teichmann s@m³/s@m\\u00b3/s@
Wed, 08 Jun 2011 10:21:36 +0000 Sascha L. Teichmann s@m³/s@m\u00b3/s@
Wed, 08 Jun 2011 10:19:23 +0000 Sascha L. Teichmann Only generate an axis element if a axis really exists.
Tue, 07 Jun 2011 21:01:09 +0000 Sascha L. Teichmann BackJumpCorrector: Simpified array swapping.
Tue, 07 Jun 2011 15:05:12 +0000 Sascha L. Teichmann Use java.util.List instead of java.util.Vector. Removed superfluous imports.
Tue, 07 Jun 2011 14:28:44 +0000 Sascha L. Teichmann code clean up in states
Tue, 07 Jun 2011 13:15:02 +0000 Ingo Weinzierl The ChartInfoGenerator appends axes range information to the document now.
Tue, 07 Jun 2011 11:43:30 +0000 Sascha L. Teichmann If Artifact.feed() fails do not store invalid values in database.
Mon, 06 Jun 2011 11:34:44 +0000 Sascha L. Teichmann Removed asymmetrical "- 1" from width calculation.
Sun, 05 Jun 2011 20:47:51 +0000 Sascha L. Teichmann Berechnung 4: Fixed problem when more than one value per segment are given.
Sun, 05 Jun 2011 18:24:46 +0000 Sascha L. Teichmann Refactored version of "Berechnung 4"
Fri, 03 Jun 2011 10:21:13 +0000 Ingo Weinzierl #90 Removed margins between data area border and curves.
Fri, 03 Jun 2011 07:20:39 +0000 Ingo Weinzierl Refactored the chart creation in the ChartInfoGenerators. Now, every chart is created by the XYChartGenerator again.
Fri, 03 Jun 2011 06:47:51 +0000 Ingo Weinzierl Charts are zoomed to a specified view if the attribute document for the chart creation contains an x and/or y range.
Thu, 02 Jun 2011 15:47:08 +0000 Sascha L. Teichmann Set collection ttl to 6 hours.
Wed, 01 Jun 2011 17:01:44 +0000 Sascha L. Teichmann Added parser for segments
Wed, 01 Jun 2011 09:57:22 +0000 Sascha L. Teichmann Fix crashes in back jump correction.
Wed, 01 Jun 2011 09:18:00 +0000 Ingo Weinzierl The matrix that is used to transform chart image coordinates into chart coordinates supports inverted x-axis now.
Wed, 01 Jun 2011 08:01:07 +0000 Ingo Weinzierl Introduced a new output generators for creating chart info documents.
Tue, 31 May 2011 14:56:18 +0000 Ingo Weinzierl Added support for the 'type' parameter of the collection's out() operation.
Tue, 31 May 2011 09:35:19 +0000 Sascha L. Teichmann Use an explicit reference km for interpolation now.
Mon, 30 May 2011 11:34:06 +0000 Sascha L. Teichmann Introduce a cache for the distance-info service
Mon, 30 May 2011 09:19:57 +0000 Sascha L. Teichmann flys/issue82: Only successful interpolations are named.
Fri, 27 May 2011 16:52:37 +0000 Sascha L. Teichmann Re-eanbled the calculation of the backjump correction.
Fri, 27 May 2011 10:09:46 +0000 Ingo Weinzierl Removed XML debug statement.
Fri, 27 May 2011 10:03:07 +0000 Ingo Weinzierl Moved the code part that skips themes to a better place. This let us paint empty charts with no themes at all.
Fri, 27 May 2011 09:47:13 +0000 Ingo Weinzierl We will no longer put deactivated themes into the chart.
Fri, 27 May 2011 08:46:26 +0000 Ingo Weinzierl Fixed the process of creating and storing the attribute of a collection.
Thu, 26 May 2011 16:54:16 +0000 Sascha L. Teichmann Make "Berechnungsart 4" work independent of flow direction. Commented out back jump correction temporarily.
Thu, 26 May 2011 15:55:48 +0000 Sascha L. Teichmann Generate fields for w/q input depend on flow direction.
Thu, 26 May 2011 14:27:06 +0000 Sascha L. Teichmann Take the flow direction into account.
Thu, 26 May 2011 09:41:57 +0000 Sascha L. Teichmann Round exploded values to a precision of 1e-6.
Wed, 25 May 2011 15:31:25 +0000 Sascha L. Teichmann WST value table: Qs are now stored in ranges for each column.
Tue, 24 May 2011 14:46:45 +0000 Sascha L. Teichmann First part of storing qs in ranges
Tue, 24 May 2011 13:24:24 +0000 Ingo Weinzierl Small bugfixes in the WQ selection state.
Tue, 24 May 2011 12:58:55 +0000 Ingo Weinzierl ISSUE-40 (part I/II) Write values that the user had former selected / inserted into DESCRIBE document to preselect such data in the UI.
Tue, 24 May 2011 12:40:06 +0000 Ingo Weinzierl Removed needless imports.
Tue, 24 May 2011 12:37:45 +0000 Ingo Weinzierl ISSUE-85 (part III/III) Use the given kilometer values for the waterlevel computation.
Tue, 24 May 2011 11:27:37 +0000 Ingo Weinzierl ISSUE-85 (part I/III) Added further fields for the location/range state.
Tue, 24 May 2011 11:23:57 +0000 Sascha L. Teichmann Moved WST value table cache key to a separate class.
Mon, 23 May 2011 22:33:37 +0000 Sascha L. Teichmann Introduce model to store q values of WST columns efficiently.
Mon, 23 May 2011 15:11:55 +0000 Ingo Weinzierl ISSUE-62 (part I/II) States are no longer filled with data - if a state needs user input, it needs to query the owner artifact.
Mon, 23 May 2011 14:32:17 +0000 Ingo Weinzierl Added a method to dump the artifacts state/data.
Mon, 23 May 2011 13:35:52 +0000 Sascha L. Teichmann flys/issue84: Forget to select wst kind.
Fri, 20 May 2011 10:41:46 +0000 Sascha L. Teichmann fix for flys/issue81: km weights were swapped
Fri, 20 May 2011 09:23:09 +0000 Ingo Weinzierl Tagged release 2.3.1 of flys-artifacts.
Fri, 20 May 2011 09:21:38 +0000 Ingo Weinzierl Prepared Changes for the upcoming release.
Tue, 28 Jun 2011 07:55:25 +0000 Ingo Weinzierl Tagged RELEASE 2.4 of flys-client.
Mon, 27 Jun 2011 15:15:34 +0000 Ingo Weinzierl #182 Initial WQ mode in adapted wq panel is now Q.
Mon, 27 Jun 2011 13:06:22 +0000 Ingo Weinzierl Prepared Changes for the upcoming release.
Sun, 26 Jun 2011 17:20:57 +0000 Sascha L. Teichmann Removed trailing whitespace.
Sun, 26 Jun 2011 17:02:31 +0000 Sascha L. Teichmann Removed superfluous imports.
Fri, 24 Jun 2011 11:19:35 +0000 Ingo Weinzierl #165 Set the max length of project names to 50 characters.
Fri, 24 Jun 2011 09:53:25 +0000 Ingo Weinzierl Zoom-to-max-extent will zoom to the initial chart range now (without zoom values given).
Fri, 24 Jun 2011 09:20:22 +0000 Ingo Weinzierl #21 Newly created projects cannot be opened twice.
Thu, 23 Jun 2011 17:46:08 +0000 Ingo Weinzierl #170 Changed the DOM manipulation while zoom and drag operation.
Thu, 23 Jun 2011 17:16:08 +0000 Sascha L. Teichmann Prepare for AT export.
Thu, 23 Jun 2011 11:28:42 +0000 Ingo Weinzierl Removed the formatter for project names in the project list.
Thu, 23 Jun 2011 10:07:52 +0000 Ingo Weinzierl Escape project's names in the project list.
Thu, 23 Jun 2011 09:29:46 +0000 Ingo Weinzierl #165 (part 1) Added tooltips and table headers in the project list.
Thu, 23 Jun 2011 09:22:54 +0000 Ingo Weinzierl Improved the exception handling.
Thu, 23 Jun 2011 09:11:54 +0000 Sascha L. Teichmann First version of error reports.
Wed, 22 Jun 2011 15:34:52 +0000 Sascha L. Teichmann Stub for report service.
Wed, 22 Jun 2011 15:11:15 +0000 Ingo Weinzierl The adapted WQ panel now displays warnings if no information are present to validate user input.
Wed, 22 Jun 2011 14:02:11 +0000 Ingo Weinzierl Register newly created CollectionViews at FLYSWorkspace to avoid an inconsistent view.
Wed, 22 Jun 2011 13:39:15 +0000 Ingo Weinzierl Open projects are removed from screen if the user deletes them (via project list).
Wed, 22 Jun 2011 12:50:20 +0000 Ingo Weinzierl Implemented the RPC stubs to set the TTL and name of a collection and to delete an existing collection.
Wed, 22 Jun 2011 11:47:07 +0000 Ingo Weinzierl Added stubs to set the name and ttl of a collection and to delete a collection.
Wed, 22 Jun 2011 10:14:57 +0000 Ingo Weinzierl Improved the project list - listeners are notified after setting the name and ttl of a project.
Wed, 22 Jun 2011 08:06:19 +0000 Ingo Weinzierl Adapted a german string in the WQ panel.
Wed, 22 Jun 2011 07:39:12 +0000 Ingo Weinzierl #104 The WQ panel now display the selected wq mode.
Tue, 21 Jun 2011 17:53:08 +0000 Ingo Weinzierl Initialize the combobox in the SelectProvider correctly.
Tue, 21 Jun 2011 17:29:18 +0000 Ingo Weinzierl #156 Do not display report modes as tabs in the project view.
Tue, 21 Jun 2011 17:18:47 +0000 Ingo Weinzierl The comboboxes to select the calculation mode are no longer editable.
Tue, 21 Jun 2011 17:09:31 +0000 Ingo Weinzierl Restore the size of project windows if they are brought up to front.
Tue, 21 Jun 2011 16:54:17 +0000 Ingo Weinzierl DoubleArrayPanel takes care on empty array fields when adding new double values. This avoids displaying 'null' values.
Tue, 21 Jun 2011 16:43:59 +0000 Sascha L. Teichmann Filter reports and dispatch them to updateReports().
Tue, 21 Jun 2011 16:41:09 +0000 Ingo Weinzierl #132 Set the initial mode of the location/distance panel to 'distance'.
Tue, 21 Jun 2011 16:22:39 +0000 Ingo Weinzierl The project list displays the favorite state of a collection now. A gold star means, that a collection is a owner's favorite project and will never die. A silver star means, that the project is a common project.
Tue, 21 Jun 2011 16:14:10 +0000 Sascha L. Teichmann Set project list update interval to 5 minutes.
Tue, 21 Jun 2011 10:05:04 +0000 Ingo Weinzierl #22 Introduced a polling mechanism to refresh the projects of a user in the project list.
Tue, 21 Jun 2011 08:13:47 +0000 Ingo Weinzierl Added i18n strings for each calculation report output.
Mon, 20 Jun 2011 16:57:11 +0000 Sascha L. Teichmann Forget to commit changelog
Mon, 20 Jun 2011 16:35:43 +0000 Sascha L. Teichmann Added dummy report panel.
Mon, 20 Jun 2011 16:25:48 +0000 Sascha L. Teichmann Removed more expensive XPath.
Mon, 20 Jun 2011 10:32:54 +0000 Ingo Weinzierl #140, #122: Splitted the WQD table in the WQInputPanel into two tables: a table for QD values and a table for W values - only the QD table is selectable.
Fri, 17 Jun 2011 13:46:28 +0000 Ingo Weinzierl #140 Code cleanup in WQ table.
Fri, 17 Jun 2011 13:03:32 +0000 Ingo Weinzierl #118 Added 'wq_free' parameter to feed document even if single value mode is selected.
Fri, 17 Jun 2011 11:14:02 +0000 Ingo Weinzierl #118 Added a further radio button to select 'Q at Gauge' to the WQ panel.
Fri, 17 Jun 2011 10:16:45 +0000 Ingo Weinzierl Added 'index' and 'description' of a facet to the collection's attribute document. The ChartThemePanel is now working again.
Fri, 17 Jun 2011 09:57:23 +0000 Ingo Weinzierl The description of a facet is now displayed in the ChartThemePanel.
Thu, 16 Jun 2011 15:57:20 +0000 Sascha L. Teichmann Alloc TreeNode arrays with the right size because its known.
Wed, 15 Jun 2011 09:03:27 +0000 Ingo Weinzierl The DoubleArrayPanel is more tolerant towards entered whitespaces.
Wed, 15 Jun 2011 09:01:22 +0000 Ingo Weinzierl Avoid GWT throwing warnings if no 'old' items exist for the parameter list.
Wed, 15 Jun 2011 08:28:54 +0000 Ingo Weinzierl #117 Improved double value parsing in DoubleArrayPanel and DoubleRangePanel.
Tue, 14 Jun 2011 16:43:09 +0000 Ingo Weinzierl #88 Modified strings in the location/distance panel.
Tue, 14 Jun 2011 16:28:19 +0000 Sascha L. Teichmann DistanceInfoService: Got rid of namespace. Use DOM instead of XPath.
Tue, 14 Jun 2011 15:46:31 +0000 Sascha L. Teichmann Bring Oberkante and Unterkante into UI.
Tue, 14 Jun 2011 14:19:45 +0000 Sascha L. Teichmann Loop through 'Unterkante' 'Oberkante' from service.
Tue, 14 Jun 2011 14:01:08 +0000 Ingo Weinzierl Adjusted a german error message.
Tue, 14 Jun 2011 14:00:19 +0000 Ingo Weinzierl Introduced a client side input validation for the adapted WQ panel.
Tue, 14 Jun 2011 11:31:33 +0000 Ingo Weinzierl Introduced a client side validation for the WQ panel.
Tue, 14 Jun 2011 10:42:34 +0000 Ingo Weinzierl Introduced an input validation for the location panels.
Thu, 09 Jun 2011 14:06:10 +0000 Ingo Weinzierl Introduced a client side validation before new user data are sent to the server - the range/location panel already implements this validation.
Thu, 09 Jun 2011 10:57:42 +0000 Ingo Weinzierl Parse the min/max axes ranges for the ChartInfo and modified the zoom and pan actions to match the current server implementation.
Thu, 09 Jun 2011 06:05:44 +0000 Ingo Weinzierl #139 Fixed NPE while initialising user defined values in the adapted wq panel.
Wed, 08 Jun 2011 14:49:47 +0000 Ingo Weinzierl Added units to the selected W or Q values in the static UI part.
Wed, 08 Jun 2011 13:28:23 +0000 Ingo Weinzierl #43 Modified an english warning text.
Wed, 08 Jun 2011 13:21:46 +0000 Ingo Weinzierl #21 There might be just a single window for each project now. Users can't open a project twice.
Wed, 08 Jun 2011 12:43:38 +0000 Ingo Weinzierl Avoid NPE while parsing axes in ChartInfoService.
Wed, 08 Jun 2011 10:57:28 +0000 Sascha L. Teichmann Don't crash if there is no transformer.
Wed, 08 Jun 2011 07:31:01 +0000 Ingo Weinzierl Added a dirty hack to display project names shorter than 30 characters.
Tue, 07 Jun 2011 13:58:38 +0000 Ingo Weinzierl The MouseOut event will now finish a current pan operation.
Tue, 07 Jun 2011 13:26:24 +0000 Ingo Weinzierl Adapted the ChartInfoService to return more information about charts than before. In addition, the PanControl is added to the chart toolbar.
Tue, 07 Jun 2011 13:07:27 +0000 Ingo Weinzierl Added a PanControl to pan charts.
Tue, 07 Jun 2011 12:51:57 +0000 Ingo Weinzierl Adjusted the return values of the CSVExportService, so that GWT can handle those values better.
Tue, 07 Jun 2011 10:03:19 +0000 Ingo Weinzierl Use the same code to create the attribute document for the chart creation in ChartOutputService and ChartInfoService.
Mon, 06 Jun 2011 11:56:15 +0000 Ingo Weinzierl Repaired broken zoom-out control.
Mon, 06 Jun 2011 11:31:21 +0000 Ingo Weinzierl #131 Repaired a broken XPath expression for the chart attributes.
Mon, 06 Jun 2011 08:21:08 +0000 Ingo Weinzierl Improved the zoombox control: cancel the zoom operation if the mouse pointer leaves the chart area.
Fri, 03 Jun 2011 12:19:34 +0000 Ingo Weinzierl Added missing icon for the zoom-out control.
Fri, 03 Jun 2011 12:18:03 +0000 Ingo Weinzierl Added a zoom-out control to the chart toolbar which zooms 10% of the current ranges out.
Fri, 03 Jun 2011 08:20:22 +0000 Ingo Weinzierl Added a control to reset the zoom of a chart. In addition, the zoom buttons are displayed as ImgButtons now.
Fri, 03 Jun 2011 06:34:32 +0000 Ingo Weinzierl Append the x and y ranges determined after zooming with the ZoomboxControl to the attribute document used for the chart creation.
Wed, 01 Jun 2011 14:13:29 +0000 Ingo Weinzierl Added the ChartOutputTab as ZoomHandler for the ZoomboxControl - no zooming is done yet.
Wed, 01 Jun 2011 13:43:35 +0000 Ingo Weinzierl Implemented a zoombox control and added it to the chart toolbar.
Wed, 01 Jun 2011 11:59:59 +0000 Ingo Weinzierl Improved the layout of the mouse position panel.
Wed, 01 Jun 2011 09:03:18 +0000 Ingo Weinzierl Adapted the MousePositionPanel to use the Transform2D object for computing the chart coordinates from image coordinates.
Wed, 01 Jun 2011 08:50:40 +0000 Ingo Weinzierl The collection object in the CollectionView is now accessible via getter method.
Wed, 01 Jun 2011 08:49:39 +0000 Ingo Weinzierl Removed a debug statement.
Wed, 01 Jun 2011 08:15:58 +0000 Ingo Weinzierl Added a chart info service to fetch the info document for a specific chart from artifact server.
Fri, 27 May 2011 15:38:24 +0000 Ingo Weinzierl Added a first implementation of a MousePositionPanel - work is not finished yet.
Fri, 27 May 2011 13:48:25 +0000 Ingo Weinzierl Moved the toolbar stuff of the chart panel into an own class.
Fri, 27 May 2011 13:10:09 +0000 Ingo Weinzierl Replaced buttons displayed as labels with real buttons.
Fri, 27 May 2011 09:50:57 +0000 Ingo Weinzierl The chart in the ChartOutputTab is refreshed when there occur any changes in the chart theme panel.
Fri, 27 May 2011 08:59:26 +0000 Ingo Weinzierl Connected the CollectionAttributeService with the artifact server - Collection modifications will now be stored in the artifact databae.
Fri, 27 May 2011 08:53:22 +0000 Ingo Weinzierl Changes in the chart theme panel will now have an effect on the themes stored at the collection.
Thu, 26 May 2011 13:53:36 +0000 Ingo Weinzierl Connected the actions in the navigation panel with the theme list in the ChartThemePanel - themes can be moved now.
Wed, 25 May 2011 16:23:16 +0000 Ingo Weinzierl Added a navigation panel to the bottom of the theme control panel to move themes up/down (function not implemented yet).
Wed, 25 May 2011 14:58:42 +0000 Ingo Weinzierl Added a service stub to update/modify the attribute of a collection (used in the theme control panel).
Wed, 25 May 2011 14:50:37 +0000 Ingo Weinzierl Removed a bug in the DefaultTheme that prevented setting the artifact of a Theme correctly.
Wed, 25 May 2011 13:42:04 +0000 Ingo Weinzierl The theme list information stored in the attribute of a collection is read and added in form of Themes and ThemeLists to the Collection.
Wed, 25 May 2011 11:34:34 +0000 Ingo Weinzierl Implemented the first step of a theme control panel for charts.
Wed, 25 May 2011 11:30:46 +0000 Ingo Weinzierl Removed needless imports.
Wed, 25 May 2011 08:03:02 +0000 Ingo Weinzierl Added a new package 'chart' that should be the place where chart relevant classes should be stored. Moved ChartOutputTab into that package.
Wed, 25 May 2011 07:05:22 +0000 Ingo Weinzierl Bugfix in the range/location panel - avoid NullPointerExceptions in getData().
Tue, 24 May 2011 16:22:34 +0000 Ingo Weinzierl ISSUE-90 & ISSUE-40 (part II/II) Former selected values are preselected after back jumps.
Tue, 24 May 2011 11:22:05 +0000 Ingo Weinzierl Added i18n error messages.
Tue, 24 May 2011 11:21:11 +0000 Ingo Weinzierl Take care on empty Data objects while initializing default values in Location/distance panel.
Tue, 24 May 2011 10:52:00 +0000 Ingo Weinzierl ISSUE-85 (part II/III) Repaired broken location/range panel.
Tue, 24 May 2011 10:46:48 +0000 Ingo Weinzierl The default values/labels for Data objects are read from DESCRIBE document.
Tue, 24 May 2011 10:44:59 +0000 Ingo Weinzierl Enhanced the Data object to save default values/labels.
Mon, 23 May 2011 14:30:54 +0000 Ingo Weinzierl Added a mechanism to listen to changes relating to output modes of collections and artifacts. Solves a part of ISSUE-62.
Fri, 20 May 2011 10:15:10 +0000 Ingo Weinzierl Reverted commit that changed the default port of the artifact server.
Fri, 20 May 2011 10:10:26 +0000 Ingo Weinzierl Added missing i18n strings for duration curve export.
Fri, 20 May 2011 09:28:07 +0000 Ingo Weinzierl Tagged release 2.3.1 of flys-client.
Fri, 20 May 2011 09:24:46 +0000 Ingo Weinzierl Prepared Changes for release 2.3.1
Fri, 28 Sep 2012 12:14:12 +0200 Thomas Arendsen Hein merged flys-backend/2.3.1 2.3.1
less more | rev 747: (0) -240 +240 +1000 +3000 tip
http://dive4elements.wald.intevation.org