| Thu, 21 Jul 2011 15:23:03 +0000 |
Ingo Weinzierl |
Repaired broken recommendation parsing from Artifact's DESCRIBE document (which structure has changed).
|
| Wed, 20 Jul 2011 13:31:20 +0000 |
Ingo Weinzierl |
The layers created in the floodmap reflect to the facets this output mode has.
|
| Wed, 20 Jul 2011 07:52:19 +0000 |
Ingo Weinzierl |
Refactored code of theme panel and added a MapThemePanel.
|
| Tue, 19 Jul 2011 16:32:52 +0000 |
Ingo Weinzierl |
Facets read from Collection's DESCRIBE document keep all their attributes after the Collection's attribute has been modified.
|
| Mon, 18 Jul 2011 09:52:16 +0000 |
Ingo Weinzierl |
Read/create recommended Artifacts and add them to the current Collection.
|
| Tue, 12 Jul 2011 15:04:50 +0000 |
Ingo Weinzierl |
Added map tools to measure lines and polygons.
|
| Tue, 12 Jul 2011 13:44:27 +0000 |
Ingo Weinzierl |
Added missing ChangeLog entry for the last commit.
|
| Tue, 12 Jul 2011 13:43:49 +0000 |
Ingo Weinzierl |
Added map controls for digitizing and removing barriers.
|
| Mon, 11 Jul 2011 13:29:57 +0000 |
Ingo Weinzierl |
Added controls to navigate in the map.
|
| Mon, 11 Jul 2011 10:21:16 +0000 |
Ingo Weinzierl |
Finished layouting the map components.
|
| Fri, 08 Jul 2011 14:56:02 +0000 |
Ingo Weinzierl |
Introduced GwtOpenLayers to bring up maps.
|
| Fri, 08 Jul 2011 08:54:08 +0000 |
Ingo Weinzierl |
Improved the process of creating OutputTabs. Added support for map output.
|
| Thu, 07 Jul 2011 15:04:45 +0000 |
Ingo Weinzierl |
Added strings for the output mode 'floodmap'.
|
| Thu, 07 Jul 2011 14:46:55 +0000 |
Ingo Weinzierl |
Set default values in the BooleanPanel, TextProvider and AutoIntegerPanel.
|
| Thu, 07 Jul 2011 14:12:21 +0000 |
Ingo Weinzierl |
Finished the panel to enter waterlevel/ground information (from, to, diff).
|
| Thu, 07 Jul 2011 12:10:50 +0000 |
Ingo Weinzierl |
Finished the panel to activate/deactivate optional parameters.
|
| Thu, 07 Jul 2011 10:33:29 +0000 |
Ingo Weinzierl |
Finished the panel that allows integers and the string 'auto'.
|
| Wed, 06 Jul 2011 15:34:38 +0000 |
Ingo Weinzierl |
Made stepping forward/backword much smoother in the parameter list.
|
| Wed, 06 Jul 2011 13:06:04 +0000 |
Ingo Weinzierl |
Layout improvements related to the height of components in the current parameterlist.
|
| Wed, 06 Jul 2011 12:31:32 +0000 |
Ingo Weinzierl |
Integrated a stacked panel on the right side of the ParameterList that enables users to see calculation results and the helper panel at the same time.
|
| Tue, 05 Jul 2011 17:28:04 +0000 |
Ingo Weinzierl |
Added new UI providers.
|
| Tue, 05 Jul 2011 16:13:08 +0000 |
Ingo Weinzierl |
Commit forgotten ChangeLog.
|
| Tue, 05 Jul 2011 16:12:34 +0000 |
Ingo Weinzierl |
Added a panel that lets users step to a next state without feeding the current artifact with new data.
|
| Mon, 04 Jul 2011 07:15:44 +0000 |
Ingo Weinzierl |
Added the missing 'back'-button to the DistancePanel.
|
| Fri, 01 Jul 2011 09:11:39 +0000 |
Ingo Weinzierl |
#159 Added listeners to the locations and distances tables of the kilometer range panel to set the from/to fields.
|
| Fri, 01 Jul 2011 08:44:24 +0000 |
Ingo Weinzierl |
#159 The tables in the WQ panel for calculation 4 are now filled with data.
|
| Thu, 30 Jun 2011 11:59:02 +0000 |
Ingo Weinzierl |
The distance panel got two tables for locations and ranges. Both do not load any data until now.
|
| Thu, 30 Jun 2011 10:29:43 +0000 |
Ingo Weinzierl |
Implemented a new panel to enter kilometer ranges (with no option to insert locations).
|
| Wed, 29 Jun 2011 12:33:58 +0000 |
Ingo Weinzierl |
#185 Repaired zooming for IE8 and Chrome.
|
| Wed, 29 Jun 2011 11:14:43 +0000 |
Sascha L. Teichmann |
Reordered delete and rename in project context menu, add separator.
|
| Wed, 29 Jun 2011 07:59:46 +0000 |
Ingo Weinzierl |
#181 Repaired activate/deactivate function in theme list.
|
| Tue, 28 Jun 2011 15:55:56 +0000 |
Ingo Weinzierl |
GWT version upgrade from 2.1.1 to 2.3.0
|
| Tue, 28 Jun 2011 07:55:25 +0000 |
Ingo Weinzierl |
Tagged RELEASE 2.4 of flys-client.
|
| Fri, 28 Sep 2012 12:14:15 +0200 |
Thomas Arendsen Hein |
merged flys-backend/2.4
2.4
|
| Tue, 28 Jun 2011 07:57:43 +0000 |
Ingo Weinzierl |
Tagged RELEASE 2.4 of flys-backend.
|
| Mon, 27 Jun 2011 13:58:40 +0000 |
Ingo Weinzierl |
Prepared Changes for the upcoming release.
|
| Sun, 26 Jun 2011 17:13:53 +0000 |
Sascha L. Teichmann |
Removed trailing whitespace.
|
| Sun, 26 Jun 2011 17:04:44 +0000 |
Sascha L. Teichmann |
Removed superfluous imports.
|
| Sun, 26 Jun 2011 16:13:08 +0000 |
Sascha L. Teichmann |
Added a method to river to find the gauge with the max overlap with a given interval.
|
| Sun, 26 Jun 2011 12:16:36 +0000 |
Sascha L. Teichmann |
When
|
| Wed, 22 Jun 2011 08:56:09 +0000 |
Sascha L. Teichmann |
River: Added method to find gauge by its name.
|
| Sun, 19 Jun 2011 17:43:38 +0000 |
Sascha L. Teichmann |
Importer: Fix import of annotation type classification.
|
| Sun, 19 Jun 2011 12:26:12 +0000 |
Sascha L. Teichmann |
Added classification of annotation types. Needs testing!
|
| Sat, 18 Jun 2011 20:13:31 +0000 |
Sascha L. Teichmann |
river model: Added method to find gauge by a position lying in its range.
|
| Wed, 15 Jun 2011 09:22:00 +0000 |
Sascha L. Teichmann |
First part of flys/issue18
|
| Tue, 14 Jun 2011 17:30:09 +0000 |
Sascha L. Teichmann |
Fix for flys/issue110: Start index was shifted by one.
|
| Tue, 14 Jun 2011 13:55:49 +0000 |
Sascha L. Teichmann |
Forgot to store reference to edge.
|
| Tue, 14 Jun 2011 13:31:34 +0000 |
Sascha L. Teichmann |
Register the backend model.
|
| Tue, 14 Jun 2011 13:13:58 +0000 |
Sascha L. Teichmann |
Import edges to database.
|
| Tue, 14 Jun 2011 12:34:08 +0000 |
Sascha L. Teichmann |
Added 'Kanten' model
|
| Wed, 08 Jun 2011 19:03:44 +0000 |
Sascha L. Teichmann |
River: add method to find gauge by its station position.
|
| Thu, 26 May 2011 15:00:04 +0000 |
Sascha L. Teichmann |
River: Make search for gauges independent of from/to order.
|
| Tue, 24 May 2011 11:12:59 +0000 |
Sascha L. Teichmann |
Added a new view to select qs of a WST.
|
| Tue, 24 May 2011 10:49:14 +0000 |
Sascha L. Teichmann |
Added a new view to select ws of a WST.
|
| Mon, 23 May 2011 15:01:58 +0000 |
Sascha L. Teichmann |
flys/issue76: Close gaps between q ranges
|
| Fri, 20 May 2011 09:30:08 +0000 |
Ingo Weinzierl |
Tagged release 2.3.1 of flys-backend.
|
| Fri, 28 Sep 2012 12:14:14 +0200 |
Thomas Arendsen Hein |
merged flys-artifacts/2.4
|
| Tue, 28 Jun 2011 09:56:52 +0000 |
Ingo Weinzierl |
Tagged RELEASE 2.4 of flys-artifacts.
|
| Mon, 27 Jun 2011 16:07:24 +0000 |
Ingo Weinzierl |
The WST export contains the corrected W values now.
|
| Mon, 27 Jun 2011 14:06:16 +0000 |
Sascha L. Teichmann |
WQ: Guessing increaing w is not based on direct neighbors any more.
|
| Mon, 27 Jun 2011 13:58:03 +0000 |
Sascha L. Teichmann |
ATWriter: Fixed array size to construct spline with stricly increasing values.
|
| Mon, 27 Jun 2011 10:24:54 +0000 |
Ingo Weinzierl |
Prepared Changes for the upcoming release.
|
| Mon, 27 Jun 2011 09:42:21 +0000 |
Sascha L. Teichmann |
Fix for flys/issue150: Invert the x axis if its guessed that water is increasing.
|
| Mon, 27 Jun 2011 09:17:41 +0000 |
Sascha L. Teichmann |
WQ: Added a method to guess is increasing.
|
| Mon, 27 Jun 2011 07:45:32 +0000 |
Ingo Weinzierl |
#177 Commented out the code that generates the series names in discharge curves. This code currently generates memory problems and stops the server accepting new http requests.
|
| Sun, 26 Jun 2011 17:18:59 +0000 |
Sascha L. Teichmann |
Removed trailing whitespace.
|
| Sun, 26 Jun 2011 17:06:35 +0000 |
Sascha L. Teichmann |
Removed dead code.
|
| Sun, 26 Jun 2011 16:40:35 +0000 |
Sascha L. Teichmann |
Forgot to check in last ChangeLog change.
|
| Sun, 26 Jun 2011 16:19:02 +0000 |
Sascha L. Teichmann |
Fix for flys/issue173
|
| Sun, 26 Jun 2011 14:46:48 +0000 |
Sascha L. Teichmann |
Fix for flys/issue147
|
| Sun, 26 Jun 2011 13:07:44 +0000 |
Sascha L. Teichmann |
Fix for flys/issue86
|
| Sun, 26 Jun 2011 10:33:38 +0000 |
Sascha L. Teichmann |
Fix for flys/issue86
|
| Sat, 25 Jun 2011 17:35:50 +0000 |
Sascha L. Teichmann |
Fixed "W am Pegel" calculations.
|
| Fri, 24 Jun 2011 12:05:13 +0000 |
Ingo Weinzierl |
#174 Longitudinal section charts will now have an upper margin again.
|
| Fri, 24 Jun 2011 09:49:27 +0000 |
Ingo Weinzierl |
#172 Charts of type duration curve will now have a lower X set to '0'.
|
| Thu, 23 Jun 2011 21:44:24 +0000 |
Sascha L. Teichmann |
ATWriter: Results are now in cm. Made it more robust against corner cases.
|
| Thu, 23 Jun 2011 17:22:17 +0000 |
Sascha L. Teichmann |
Added generation and configuration of AT facets.
|
| Thu, 23 Jun 2011 16:45:48 +0000 |
Sascha L. Teichmann |
Added exporter for AT facets.
|
| Thu, 23 Jun 2011 15:50:44 +0000 |
Sascha L. Teichmann |
New AT writer for results.
|
| Thu, 23 Jun 2011 13:42:47 +0000 |
Ingo Weinzierl |
#157 Both types of discharge curves will now include the '0' value on the x-axis.
|
| Thu, 23 Jun 2011 12:39:59 +0000 |
Sascha L. Teichmann |
WQDay is based on WQ now to make it exportable as AT.
|
| Thu, 23 Jun 2011 12:19:12 +0000 |
Sascha L. Teichmann |
Added base class WQ for WQKms.
|
| Thu, 23 Jun 2011 08:58:30 +0000 |
Sascha L. Teichmann |
Corrected configuration for error reports.
|
| Wed, 22 Jun 2011 14:47:22 +0000 |
Ingo Weinzierl |
#164 Create the items for the adapted WQ state with range information for W and Q.
|
| Wed, 22 Jun 2011 10:54:30 +0000 |
Sascha L. Teichmann |
"Abflusskurve am Pegel" looks correct again.
|
| Wed, 22 Jun 2011 10:36:27 +0000 |
Sascha L. Teichmann |
Improved situtation on rendering "Abflusskurve am Pegel". Not fully working, yet.
|
| Wed, 22 Jun 2011 09:19:16 +0000 |
Sascha L. Teichmann |
Generate facets for "Abflusskurven am Pegel". Not working by now. :-/
|
| Wed, 22 Jun 2011 06:51:36 +0000 |
Ingo Weinzierl |
#161 Include the 0 on the second y axis (the Q axis) in longitudinal section charts intially.
|
| Tue, 21 Jun 2011 21:41:49 +0000 |
Sascha L. Teichmann |
Draw correction curve again.
|
| Tue, 21 Jun 2011 18:10:49 +0000 |
Ingo Weinzierl |
#157 Computed discharge curve charts always have a lower bound set to 0.
|
| Tue, 21 Jun 2011 17:39:29 +0000 |
Ingo Weinzierl |
#90 Added a margin between chart data and chart axes to avoid displaying curves on the chart border.
|
| Tue, 21 Jun 2011 17:03:46 +0000 |
Sascha L. Teichmann |
Fix for flys/issue158
|
| Tue, 21 Jun 2011 16:31:19 +0000 |
Sascha L. Teichmann |
Fix for flys/issue154
|
| Tue, 21 Jun 2011 16:22:28 +0000 |
Sascha L. Teichmann |
Only generate 'outs' if they have facets.
|
| Tue, 21 Jun 2011 14:33:00 +0000 |
Ingo Weinzierl |
Put the time-to-live of the collection into its DESCRIBE document.
|
| Mon, 20 Jun 2011 14:36:42 +0000 |
Sascha L. Teichmann |
Configured states to generate report facets.
|
| Mon, 20 Jun 2011 14:14:20 +0000 |
Sascha L. Teichmann |
Generate report facets if there are problems with the calculations.
|
| Mon, 20 Jun 2011 13:47:59 +0000 |
Sascha L. Teichmann |
Added generator and facet for error reports.
|
| Mon, 20 Jun 2011 12:32:32 +0000 |
Sascha L. Teichmann |
New model to transport data and error reports of calculations.
|
| Sat, 18 Jun 2011 20:20:34 +0000 |
Sascha L. Teichmann |
Added calculation "am Pegel" version to the "Wasserspiegellage" calculation.
|
| Sat, 18 Jun 2011 18:38:04 +0000 |
Sascha L. Teichmann |
Removed more dead code.
|
| Sat, 18 Jun 2011 18:19:34 +0000 |
Sascha L. Teichmann |
Removed dead code.
|
| Sat, 18 Jun 2011 17:03:17 +0000 |
Sascha L. Teichmann |
Only generate facets when needed.
|
| Fri, 17 Jun 2011 16:17:03 +0000 |
Sascha L. Teichmann |
Merged revisions 2127-2133,2136-2137,2140,2143-2144,2146,2150-2151,2153-2154 via svnmerge from
|
| Fri, 17 Jun 2011 14:37:09 +0000 |
Sascha L. Teichmann |
Generate data facets for the computed states.
facets-slt
|
| Fri, 17 Jun 2011 14:03:29 +0000 |
Sascha L. Teichmann |
Add facet to access raw computed data.
facets-slt
|
| Fri, 17 Jun 2011 13:45:50 +0000 |
Sascha L. Teichmann |
Base WST/CSV exports on facets. TODO: generate the facets.
facets-slt
|
| Fri, 17 Jun 2011 13:10:20 +0000 |
Sascha L. Teichmann |
call computeAdvance() if we want to advance.
facets-slt
|
| Fri, 17 Jun 2011 11:23:57 +0000 |
Sascha L. Teichmann |
mico opt: inter cmps are faster than str cmps.
facets-slt
|
| Fri, 17 Jun 2011 11:08:31 +0000 |
Sascha L. Teichmann |
make getGauges() more robust
facets-slt
|
| Fri, 17 Jun 2011 10:40:54 +0000 |
Sascha L. Teichmann |
Removed ComputeCallback because this was thought too complicated. Fixed issue with facets not be re-generated if same state is entered again.
facets-slt
|
| Fri, 17 Jun 2011 09:19:43 +0000 |
Ingo Weinzierl |
OutGenerators use now facets to fetch necessary data.
facets-slt
|
| Thu, 16 Jun 2011 14:31:41 +0000 |
Ingo Weinzierl |
OutGenerators doOut() takes a facet object now instead of just its name.
facets-slt
|
| Thu, 16 Jun 2011 14:10:49 +0000 |
Ingo Weinzierl |
Add index and description of facets to collections describe document.
facets-slt
|
| Thu, 16 Jun 2011 13:24:00 +0000 |
Ingo Weinzierl |
Write computed facets into artifacts describe document.
facets-slt
|
| Thu, 16 Jun 2011 10:05:44 +0000 |
Ingo Weinzierl |
Generated facets for each output aspect.
facets-slt
|
| Thu, 16 Jun 2011 09:04:59 +0000 |
Ingo Weinzierl |
Store facets for each state.
facets-slt
|
| Thu, 16 Jun 2011 08:57:05 +0000 |
Ingo Weinzierl |
Use enums to dispatch computeFeed() and computeAdvance().
facets-slt
|
| Thu, 16 Jun 2011 08:43:58 +0000 |
Ingo Weinzierl |
Added two more compute() methods to ComputeCallback to distinguish between different phases of the artifact.
facets-slt
|
| Thu, 16 Jun 2011 08:25:06 +0000 |
Ingo Weinzierl |
Moved Waterlevel state into the correct package.
facets-slt
|
| Thu, 16 Jun 2011 07:50:56 +0000 |
Ingo Weinzierl |
Added a compute() method to WINFOArtifact which acts as a dispatcher for different computations. It triggers a calculation based on ComputeCallbacks that are generated by the current states.
facets-slt
|
| Wed, 15 Jun 2011 15:28:54 +0000 |
Ingo Weinzierl |
Merged with trunk and introduced hashing of computed values.
facets-slt
|
| Fri, 17 Jun 2011 13:00:54 +0000 |
Ingo Weinzierl |
Added a parameter 'wq_free' that determines that mode of calculation 1 (specifies if the calculation is bound to a gauge or not).
|
| Fri, 17 Jun 2011 12:38:41 +0000 |
Ingo Weinzierl |
DischargeLongitudinalSectionCurve will have corrected W facets now.
|
| Tue, 14 Jun 2011 16:26:59 +0000 |
Sascha L. Teichmann |
DistanceInfoService: Got rid of namespace in result document.
|
| Tue, 14 Jun 2011 15:34:27 +0000 |
Ingo Weinzierl |
#77 The curves in a duration chart will have names now.
|
| Tue, 14 Jun 2011 13:54:19 +0000 |
Ingo Weinzierl |
The min/max W/Q ranges in the panel for calculation4 are written into the DESCRIBE.
|
| Tue, 14 Jun 2011 13:53:25 +0000 |
Sascha L. Teichmann |
Write top 'Oberkante' and bottom 'Unterkante' to out going XML if they exist.
|
