log

age author description
Thu, 04 Sep 2014 12:03:02 +0200 Tom Gottfried Removed obsolete average and renamed some symbols to make the difference between single fractions and sums of them clearer in the calculation.
Thu, 04 Sep 2014 12:00:17 +0200 Sascha L. Teichmann Remove dead class.
Thu, 04 Sep 2014 11:15:34 +0200 Raimund Renkert merged.
Thu, 04 Sep 2014 11:14:24 +0200 Raimund Renkert Changed discharge processor to plot only discharge curves and added processor for computed discharge curves.
Thu, 04 Sep 2014 11:10:37 +0200 Raimund Renkert Added new processor to plot misc discharge data, e.g. from datacage or recommendations.
Wed, 03 Sep 2014 18:21:35 +0200 Tom Gottfried The existing implementation respects the fact that months are 0-based.
Wed, 03 Sep 2014 16:46:09 +0200 Tom Gottfried Complete CSV-export and correct headers.
Wed, 03 Sep 2014 10:24:39 +0200 Tom Gottfried Rev aa80f9ba56a9 was incomplete. Shame on me.
Wed, 03 Sep 2014 09:55:32 +0200 Tom Gottfried We have to calculate bed load plus suspended sand instead of suspended load.
Tue, 02 Sep 2014 17:47:03 +0200 Tom Gottfried Let epochs be averages over their years.
Tue, 02 Sep 2014 17:10:22 +0200 Tom Gottfried Precalculated sums from the database will come through recommendations.
Tue, 02 Sep 2014 14:46:20 +0200 Tom Gottfried Make sedimentload loadable as old calculation.
Mon, 01 Sep 2014 17:50:22 +0200 Tom Gottfried Only calculated sums of fractions should be initially shown in diagram.
Mon, 01 Sep 2014 12:34:39 +0200 Tom Gottfried Fix fraction respectively facet names and descriptions.
Mon, 01 Sep 2014 10:15:57 +0200 Tom Gottfried Broken -> broke away.
Mon, 01 Sep 2014 10:09:53 +0200 Tom Gottfried Do not handle the impossible.
Mon, 01 Sep 2014 09:43:55 +0200 Tom Gottfried Handle missing years in bed height differences without assuming an unknown year to be BC 1.
Fri, 29 Aug 2014 17:00:26 +0200 Sascha L. Teichmann Converted configuration for discharge diagrams to the new Q symmetry style.
Fri, 29 Aug 2014 16:42:58 +0200 Sascha L. Teichmann Added diagram defaults for discharge diagrams.
Fri, 29 Aug 2014 16:24:12 +0200 Sascha L. Teichmann Renamed tag in sq relation defaults to a more fitting name.
Fri, 29 Aug 2014 16:21:31 +0200 Sascha L. Teichmann Added new diagramm generator for Q symmetry.
Fri, 29 Aug 2014 15:44:08 +0200 Sascha L. Teichmann More shoveling araound generators.
Fri, 29 Aug 2014 15:22:33 +0200 Sascha L. Teichmann Added a woking copy for discharge diagramm generators. All modifications are go in here. If the process is finished we'll remove the old one and rename the copy to discharge-diagramms.xml
Fri, 29 Aug 2014 13:03:11 +0200 Tom Gottfried We have only 4 of them.
Fri, 29 Aug 2014 12:42:00 +0200 Sascha L. Teichmann More fixes for conf.xml
Fri, 29 Aug 2014 12:27:35 +0200 Sascha L. Teichmann Moved external system entites back to conf.xml. Uncool.
Fri, 29 Aug 2014 11:56:10 +0200 Sascha L. Teichmann Cleaned up generator dependencies.
Fri, 29 Aug 2014 11:43:15 +0200 Sascha L. Teichmann Moved more generator stuff in reguarding sub directory.
Fri, 29 Aug 2014 11:31:17 +0200 Sascha L. Teichmann Allow deeper nesting of output-generators in conf.xml. This allows better separation of concerns of different generator types.
Fri, 29 Aug 2014 11:24:52 +0200 Sascha L. Teichmann Moved generators.xml and its dependencies to a directory of their own.
Fri, 29 Aug 2014 11:21:35 +0200 Sascha L. Teichmann Moved external system entity for longitudinal sections default to generators.xml. TODO: Move in entirely different file.
Fri, 29 Aug 2014 11:03:38 +0200 Sascha L. Teichmann Removed obsolete imports.
Fri, 29 Aug 2014 10:49:38 +0200 Sascha L. Teichmann Fixed build error.
Fri, 29 Aug 2014 09:25:00 +0200 Tom Gottfried The relevant contents are now in artifacts/doc/datacage_ref_de.rst.
Thu, 28 Aug 2014 18:42:20 +0200 Tom Gottfried IDs can be assumed to be unique.
Thu, 28 Aug 2014 15:34:57 +0200 Tom Gottfried Do not put metadata on series if there are none (avoid NPE).
Thu, 28 Aug 2014 12:00:52 +0200 Tom Gottfried Quoting is done elsewhere since rev 7021753b3797.
Wed, 27 Aug 2014 19:52:51 +0200 Tom Gottfried The rest is silence.
Wed, 27 Aug 2014 16:47:38 +0200 Sascha L. Teichmann Make Logarithmic axis immun against negative values (not throwing Exceptions in that case).
Wed, 27 Aug 2014 15:09:45 +0200 Tom Gottfried Let the facet know the period of it's data.
Wed, 27 Aug 2014 15:01:54 +0200 Tom Gottfried Calculate all single years in given interval but only once.
Tue, 26 Aug 2014 17:21:42 +0200 Sascha L. Teichmann Merged.
Tue, 26 Aug 2014 17:21:16 +0200 Sascha L. Teichmann Datacage: Insert variable values literally into output.
Tue, 26 Aug 2014 17:16:21 +0200 Tom Gottfried With the exception of real calculation results, descriptions of sediment loads can all follow the same pattern.
Tue, 26 Aug 2014 12:09:18 +0200 Tom Gottfried Metadata in datacage tooltips for sediment densities, bed heights, flow velocities and sounding widhts.
Tue, 26 Aug 2014 11:35:47 +0200 Sascha L. Teichmann Added missing generics parameter.
Tue, 26 Aug 2014 11:28:03 +0200 Sascha L. Teichmann Sediment load: Remove simple tail recursive calls from SedimentLoadData.recursiveFindStations(). More carefully this time.
Tue, 26 Aug 2014 11:18:03 +0200 Sascha L. Teichmann Removed obsolete same package imports.
Tue, 26 Aug 2014 11:16:21 +0200 Sascha L. Teichmann Removed obsolete imports.
Mon, 25 Aug 2014 20:12:11 +0200 Andre Heinecke Fix exporter loops
Mon, 25 Aug 2014 20:03:35 +0200 Andre Heinecke Acctually use the new Sedilmentload calculation
Mon, 25 Aug 2014 20:02:28 +0200 Andre Heinecke Make SedimentloadExporter work with the new result scheme.
Mon, 25 Aug 2014 20:01:44 +0200 Andre Heinecke Correctly handle not creating facets and error reports.
Mon, 25 Aug 2014 20:00:45 +0200 Andre Heinecke GetFractionByName now returns a list as it can differ in Epochs
Mon, 25 Aug 2014 19:59:14 +0200 Andre Heinecke Add period to sedimentloaddataresult fraction
Mon, 25 Aug 2014 19:58:00 +0200 Andre Heinecke Use old names for SedimentloadDataFractions and add average fraction
Mon, 25 Aug 2014 17:28:48 +0200 Andre Heinecke Actually return the period in SedimentLoadAccess
Mon, 25 Aug 2014 17:28:18 +0200 Andre Heinecke Fix compilation of last commit
Mon, 25 Aug 2014 17:14:49 +0200 Sascha L. Teichmann Another fix for find stations in sediment load.
Mon, 25 Aug 2014 16:04:35 +0200 Andre Heinecke Correctly output problems in SedimentLoadDataCalculate
Mon, 25 Aug 2014 15:56:09 +0200 Andre Heinecke (issue1448) Add WIP SedimentLoadDataFacet and use it in calculation.
Mon, 25 Aug 2014 12:18:35 +0200 Andre Heinecke (issue 1448) Use new data model for sedimentloadinfo
Mon, 25 Aug 2014 12:05:37 +0200 Sascha L. Teichmann Sediment load: Fixed findStations() and add findLoads().
Fri, 22 Aug 2014 18:00:35 +0200 Tom Gottfried Tooltip for sediment loads in datacage.
Fri, 22 Aug 2014 17:43:36 +0200 Tom Gottfried Add SQ time interval to selection tree in datacage for sediment loads.
Fri, 22 Aug 2014 13:19:02 +0200 Tom Gottfried Remove code duplications in sedimentload datacage.
Fri, 22 Aug 2014 08:04:43 +0200 Tom Gottfried Format timestamps in datacage tooltip for porosities.
Thu, 21 Aug 2014 18:58:10 +0200 Tom Gottfried Dashed lines shall be used for sediment load at measurement stations (issue1352).
Thu, 21 Aug 2014 18:09:37 +0200 Tom Gottfried Complete mapping and themes for sediment load.
Thu, 21 Aug 2014 15:48:01 +0200 Tom Gottfried Make a difference between themes representing loads in different units.
Wed, 20 Aug 2014 17:54:12 +0200 Tom Gottfried i18n for sediment loads.
Wed, 20 Aug 2014 17:47:58 +0200 Tom Gottfried Reconstruct facet description of sediment load longitudinal sections. i18n will follow.
Wed, 20 Aug 2014 17:07:17 +0200 Tom Gottfried Reconstruct facet description of sediment load at measurement stations. i18n will follow.
Wed, 20 Aug 2014 14:53:29 +0200 Tom Gottfried Let hg ignore downloaded SmartGWT stuff.
Wed, 20 Aug 2014 14:26:42 +0200 Andre Heinecke Change facet.sedimentload.dc to facet.sedimentload.ls
Wed, 20 Aug 2014 13:17:20 +0200 Andre Heinecke (issue1681) Add l10n for grain fractions
Wed, 20 Aug 2014 13:17:03 +0200 Andre Heinecke (issue1681) Handle different grain fraction kinds
Wed, 20 Aug 2014 12:59:01 +0200 Andre Heinecke Fix typo in sedimentload i18n
Wed, 20 Aug 2014 12:55:55 +0200 Andre Heinecke (issue1681) Add themes for sedimentloads
Wed, 20 Aug 2014 12:12:18 +0200 Andre Heinecke Remove todos about sedimentload_ls facet
Wed, 20 Aug 2014 12:10:59 +0200 Andre Heinecke Remove unecessary debut output
Wed, 20 Aug 2014 12:10:32 +0200 Andre Heinecke Configure SedimentLoadLSFacet
Wed, 20 Aug 2014 12:09:41 +0200 Andre Heinecke Add SedimentLoadLSFacet
Wed, 20 Aug 2014 12:00:50 +0200 Andre Heinecke Add getSedimentLoadById accessor
Tue, 19 Aug 2014 18:46:13 +0200 Tom Gottfried Distinction by measurement station gives lots of duplicates, as we always get a whole longitudinal section.
Fri, 15 Aug 2014 18:56:02 +0200 Andre Heinecke Fix binarysearch logic in SedimentLoadData
Fri, 15 Aug 2014 18:42:39 +0200 Andre Heinecke Add translation for sedimentloads
Fri, 15 Aug 2014 18:27:19 +0200 Andre Heinecke Add new and simplyfied SedimentLoadFacet
Fri, 15 Aug 2014 18:25:43 +0200 Andre Heinecke Fix ti_stop_time naming
Fri, 15 Aug 2014 18:24:55 +0200 Andre Heinecke Change sedimentload factory from yields to loads.
Fri, 15 Aug 2014 18:21:10 +0200 Andre Heinecke Configure sedimentload static facet
Fri, 15 Aug 2014 18:10:16 +0200 Andre Heinecke Rename the SedimentLoadDataFacet and add deprection comment
Fri, 15 Aug 2014 18:09:47 +0200 Andre Heinecke Revert accidental change.
Fri, 15 Aug 2014 18:09:08 +0200 Andre Heinecke Expose sedimentLoad stations
Fri, 15 Aug 2014 18:03:41 +0200 Andre Heinecke merge
Fri, 15 Aug 2014 14:28:26 +0200 Andre Heinecke Move the old data facet out of the way.
Fri, 15 Aug 2014 18:01:06 +0200 Sascha L. Teichmann Use list() instead of iterator(). Why does this not work?
Mon, 11 Aug 2014 18:34:21 +0200 Andre Heinecke Add comment on how to obtain smartgwt
Mon, 11 Aug 2014 18:33:50 +0200 Andre Heinecke Do not try to load empty files.
Tue, 12 Aug 2014 10:57:53 +0200 Sascha L. Teichmann Be more tolerant with not existing artifact configurations.
Mon, 11 Aug 2014 17:18:36 +0200 Sascha L. Teichmann Added the broken calculation state of the new sediment load calc.
Mon, 11 Aug 2014 16:45:42 +0200 Sascha L. Teichmann Removed same package import.
Mon, 11 Aug 2014 16:43:56 +0200 Sascha L. Teichmann Removed obsolete import.
Mon, 11 Aug 2014 16:42:31 +0200 Sascha L. Teichmann Merged
Mon, 11 Aug 2014 16:41:15 +0200 Sascha L. Teichmann Removed obsolete imports.
Mon, 11 Aug 2014 15:41:12 +0200 Andre Heinecke Build is locale sensitive. Force a UTF-8 locale for building.
Fri, 08 Aug 2014 13:24:11 +0200 Tom Gottfried Datacage config for new sediment load structures. Missing: some facets and everything down from the innermost macros for sediment load at measurement stations.
Thu, 07 Aug 2014 20:03:44 +0200 Sascha L. Teichmann Added $RADIUS zoom scale sub title logic to other diagrams.
Thu, 07 Aug 2014 19:59:08 +0200 Tom Gottfried Some typos in datacage config reference.
Thu, 07 Aug 2014 19:56:15 +0200 Sascha L. Teichmann Fixed sub title zoom stuff.
Thu, 07 Aug 2014 17:26:18 +0200 Sascha L. Teichmann Merged
Thu, 07 Aug 2014 17:24:33 +0200 Sascha L. Teichmann flys/issue1262: Introduce variable $RADIUS to be used in user defined chart sub titles.
Thu, 07 Aug 2014 13:05:35 +0200 Tom Gottfried Cleaned layout for infolines (issue1635).
Wed, 06 Aug 2014 19:17:12 +0200 Tom Gottfried SCHEMA CHANGE: rename database tables from yield to load_ls according to respective classes.
Tue, 05 Aug 2014 18:28:04 +0200 Sascha L. Teichmann Parse meta data for multi attribute data.
Tue, 05 Aug 2014 18:03:45 +0200 Sascha L. Teichmann Added meta infos for multi items to enable client to order the columns in a defined order.
Tue, 05 Aug 2014 16:34:04 +0200 Sascha L. Teichmann More idiomatic Java string concat.
Thu, 31 Jul 2014 18:14:22 +0200 Sascha L. Teichmann Sediment load: transform units for official epochs, too.
Thu, 31 Jul 2014 17:04:41 +0200 Sascha L. Teichmann Sediment load: refactored epoch calculation to not average over all but per year.
Wed, 30 Jul 2014 19:26:20 +0200 Sascha L. Teichmann Sediment load: fetch sediment density for transforming t/a to m^3/a.

http://dive4elements.wald.intevation.org