log

age author description
Tue, 10 May 2011 12:43:12 +0000 Sascha L. Teichmann Datacage: Added river parameter to meta data services.
Tue, 10 May 2011 12:19:17 +0000 Ingo Weinzierl Added subtitles to the available charts.
Tue, 10 May 2011 11:40:15 +0000 Ingo Weinzierl Added a method to Resources that returns translated compound messages.
Tue, 10 May 2011 10:26:26 +0000 Ingo Weinzierl Improved the OutGenerator interface to set a master artifact for the out generation.
Tue, 10 May 2011 07:40:06 +0000 Ingo Weinzierl Enabled the WINFO artifact to choose between W and Q mode in the adapted wq panel of the discharge longitudinal section computation.
Mon, 09 May 2011 19:54:24 +0000 Sascha L. Teichmann Datacage service: Cleanup served XML document.
Mon, 09 May 2011 13:47:15 +0000 Sascha L. Teichmann Datacage: Added forgotten columns of fixation WST to datcage template.
Mon, 09 May 2011 12:53:49 +0000 Ingo Weinzierl Enabled i18n support for charts.
Mon, 09 May 2011 09:55:47 +0000 Ingo Weinzierl Added a CSV exporter for the discharge longitudinal section computation.
Sat, 07 May 2011 21:34:02 +0000 Sascha L. Teichmann Back jump correction should work now for both flow directions.
Fri, 06 May 2011 16:49:31 +0000 Sascha L. Teichmann Added data cage configuration for 'Längsschnitt'.
Fri, 06 May 2011 16:15:18 +0000 Sascha L. Teichmann Add data cage configuration for "Abflusskurve [NN + m]".
Fri, 06 May 2011 14:20:26 +0000 Ingo Weinzierl Added an OutGenerator to create discharge longitudinal section charts.
Fri, 06 May 2011 14:19:27 +0000 Ingo Weinzierl Implemented methods to retrieve and compute the data used to create discharge longitudinal sections.
Thu, 05 May 2011 12:34:53 +0000 Ingo Weinzierl Small bugfix in the adapted WQ state and further i18n strings.
Thu, 05 May 2011 12:31:28 +0000 Ingo Weinzierl Changed the y-axis title of the computed discharge curve.
Thu, 05 May 2011 06:12:44 +0000 Ingo Weinzierl Improved the transition model and added states to enable the 'discharge longitudinal section' computation - NOTE: the work in this computation has not finished yet.
Thu, 05 May 2011 05:27:41 +0000 Ingo Weinzierl Use a default step width (100m) between two kilometers if no width is given.
Thu, 05 May 2011 04:52:47 +0000 Ingo Weinzierl Fixed a potential NullPointerException while creating a longitudinal section chart.
Wed, 04 May 2011 17:01:22 +0000 Sascha L. Teichmann fix flys/issue30
Wed, 04 May 2011 13:51:25 +0000 Sascha L. Teichmann 'berechnete Abflusskurve': generate ws from qs
Wed, 04 May 2011 10:10:11 +0000 Ingo Weinzierl Filled the discharge curve exporter (CSV) with code - now, it generates a CSV export with the computed discharge curve data.
Wed, 04 May 2011 08:24:50 +0000 Ingo Weinzierl Enabled the WINFO artifact to compute the data for discharge curves (computed) - ComputedDischargeCurveGenerator uses those values now to create the chart.
Wed, 04 May 2011 07:48:39 +0000 Ingo Weinzierl Improved the transition model and added classes to enable the WINFO artifact to create computed discharge curves - NOTE: each of the new classes is just a stub.
Tue, 03 May 2011 17:37:56 +0000 Ingo Weinzierl Added an exporter to export the computed data of a duration curve.
Tue, 03 May 2011 17:34:29 +0000 Ingo Weinzierl Modified a confusing debug statement.
Tue, 03 May 2011 16:36:21 +0000 Ingo Weinzierl Added an exporter (OutGenerator) for waterlevels which currently supports CSV exports.
Tue, 03 May 2011 16:26:35 +0000 Ingo Weinzierl Introduced an export output target on collection level that enables collections to be exported.
Tue, 03 May 2011 13:23:00 +0000 Ingo Weinzierl I18N Bugfix.
Tue, 03 May 2011 13:15:56 +0000 Ingo Weinzierl Added i18n strings for the location selection.
Tue, 03 May 2011 12:05:32 +0000 Ingo Weinzierl Enabled the WINFO artifact to create duration curves - new OutGenerator, added methods for data computation.
Tue, 03 May 2011 09:23:17 +0000 Sascha L. Teichmann visualize-transitions.xsl: State quoting was done wrong.
Mon, 02 May 2011 16:58:04 +0000 Ingo Weinzierl Enhanced the transition model to reach a state that creates duration curves.
Mon, 02 May 2011 16:50:58 +0000 Sascha L. Teichmann Flush/persist cache at end of program.
Mon, 02 May 2011 16:44:02 +0000 Ingo Weinzierl The DischargeCurveGenerator uses public methods of FLYSArtifact to retrieve all necessary information of the current settings.
Mon, 02 May 2011 16:28:57 +0000 Sascha L. Teichmann Moved expensive allocation of result arrays out of km loop.
Mon, 02 May 2011 15:17:04 +0000 Ingo Weinzierl Enabled the FLYSArtifact to handle an array of inserted WQ values (without given ranges).
Mon, 02 May 2011 13:42:02 +0000 Sascha L. Teichmann Repaired DischargeTables.getQForW()
Mon, 02 May 2011 12:47:10 +0000 Ingo Weinzierl Enabled the server to handle longitudinal section chart requests with inserted W data - Ws are transformed into Qs then.
Mon, 02 May 2011 12:41:24 +0000 Ingo Weinzierl Removed an unused parameter from DischargeTables.getQForW().
Mon, 02 May 2011 09:41:22 +0000 Ingo Weinzierl Ws and Qs of a longitudinal section chart are mapped to an own range axis now.
Sun, 01 May 2011 10:58:38 +0000 Sascha L. Teichmann Added caching support for the wst value tables.
Fri, 29 Apr 2011 16:56:37 +0000 Sascha L. Teichmann Added ehcache support.
Fri, 29 Apr 2011 15:10:44 +0000 Sascha L. Teichmann Added meta data service.
Fri, 29 Apr 2011 14:39:42 +0000 Sascha L. Teichmann Added meta service stub. TODO: Add meta data builder.
Fri, 29 Apr 2011 13:06:49 +0000 Ingo Weinzierl Bugfix: Changed the datastructure of the ThemeList (inner class of FLYSArtifactCollection) to store the theme of a chart in an ordered list -> Q curves of longitudinal section charts are now drawn.
Fri, 29 Apr 2011 10:13:24 +0000 Ingo Weinzierl Implemented the chart creation of a longitudinal section chart - W and Q facets.
Fri, 29 Apr 2011 10:02:59 +0000 Ingo Weinzierl Improved the calculation of the step width of ranges.
Fri, 29 Apr 2011 10:01:41 +0000 Ingo Weinzierl New method WQKms.size() to retrieve the number of elements in the data pool.
Fri, 29 Apr 2011 08:39:17 +0000 Sascha L. Teichmann WQKms model: Added a get() method which takes destination array as an argument.
Fri, 29 Apr 2011 08:28:44 +0000 Ingo Weinzierl Introduced GNU Trove to store WQKms values in a more performant data structure.
Fri, 29 Apr 2011 08:13:56 +0000 Ingo Weinzierl Added the name of the facet to the parameterlist of OutGenerator.doOut().
Fri, 29 Apr 2011 08:02:54 +0000 Ingo Weinzierl Added themes and mappings for the W and Q theme of a longitudinal section curve.
Fri, 29 Apr 2011 07:46:27 +0000 Ingo Weinzierl Added necessary methods to start the computation of waterlevel data.
Fri, 29 Apr 2011 07:27:05 +0000 Ingo Weinzierl Introduced a model class to store a set of triple data objects that consist of W, Q and Kms information.
Fri, 29 Apr 2011 07:22:25 +0000 Ingo Weinzierl Bugfix: Removed endless loop and a bug while iterating over Hibernate results.
Thu, 28 Apr 2011 12:54:11 +0000 Ingo Weinzierl Added an OutGenerator for creating longitudinal section curves.
Thu, 28 Apr 2011 12:23:40 +0000 Ingo Weinzierl Bugfix: Added missing <output-generators> section to the global configuration.
Thu, 28 Apr 2011 11:32:41 +0000 Ingo Weinzierl Added a further state that is reached if the waterlevel calculation mode has been chosen.
Thu, 28 Apr 2011 11:22:45 +0000 Ingo Weinzierl Added a new Transition to compare values.
Thu, 28 Apr 2011 11:20:11 +0000 Ingo Weinzierl Bugfixes: Adapted a broken method call of TransitionEngine.isStateReachable() and added the outputs of a current state to the DESCRIBE.
Thu, 28 Apr 2011 11:16:21 +0000 Ingo Weinzierl Bugfix: Added the missing init() method to a Transition and call it in the TransitionFactory after a Transition has been created.
Thu, 28 Apr 2011 11:13:06 +0000 Ingo Weinzierl Bugfix: The outputs of a Collection's attribute document are stored in an outputs node now instead of being stored toplevel in the document.
Thu, 28 Apr 2011 11:08:34 +0000 Ingo Weinzierl Throw an illegal argument exception in LocationDistanceSelect.validate() and WQSelect.validate() if no data has been inserted so far.
Thu, 28 Apr 2011 09:09:44 +0000 Sascha L. Teichmann Added XSL transformation do create Graphviz digraph out of conf.xml
Thu, 28 Apr 2011 08:14:20 +0000 Ingo Weinzierl The OutGenerator gets the theme of a facet while output creation.
Wed, 27 Apr 2011 14:42:52 +0000 Ingo Weinzierl Removed useless imports.
Wed, 27 Apr 2011 14:40:44 +0000 Ingo Weinzierl Added an abstract OutGenerator that should be the base class for all generators which create charts.
Wed, 27 Apr 2011 14:35:44 +0000 Ingo Weinzierl Improved the out() operation of a Collection - the OutGenerator gets to know about the facets and its theme.
Tue, 26 Apr 2011 13:29:18 +0000 Ingo Weinzierl The Attributes of a collection are written into its DESCRIBE now.
Tue, 26 Apr 2011 13:17:08 +0000 Ingo Weinzierl Initialized the facet2theme mappings configured in themes.xml and added a function to the ThemeFactory that retrieves a theme from FLYSContext based on its name.
Fri, 22 Apr 2011 15:49:35 +0000 Sascha L. Teichmann Corrected a silly c&p mistake.
Fri, 22 Apr 2011 09:57:27 +0000 Sascha L. Teichmann Implementation of the "Ruecksprungkorrektur" to be done in "W fuer angepassten Abflusslaengschnitt".
Thu, 21 Apr 2011 08:49:58 +0000 Ingo Weinzierl Removed debug code that has been commited by accident.
Thu, 21 Apr 2011 08:47:39 +0000 Ingo Weinzierl Added a first small theme configuration and code to read it.
Thu, 21 Apr 2011 08:44:41 +0000 Ingo Weinzierl Implementation of interfaces and its default implementations and a factory to work with themes.
Wed, 20 Apr 2011 14:26:51 +0000 Sascha L. Teichmann Implementation of "Abflusskurve/Abflusstafel" calculation.
Wed, 20 Apr 2011 13:13:19 +0000 Sascha L. Teichmann Added dependency to Apache Commons Math 2.2 (Apache License 2.0)
Wed, 20 Apr 2011 09:46:40 +0000 Sascha L. Teichmann Discharge table: Fix problem when sorting by q (copied w instead of q).
Wed, 20 Apr 2011 08:00:38 +0000 Ingo Weinzierl Fixed broken HQL statement.
Tue, 19 Apr 2011 17:43:39 +0000 Sascha L. Teichmann Implemented the "Wasserstand/Wasserspiegellagen" calculation.
Tue, 19 Apr 2011 17:37:21 +0000 Sascha L. Teichmann Discharge table: we need a getQForW() and not a getWForQ().
Tue, 19 Apr 2011 14:48:28 +0000 Sascha L. Teichmann Discharge tables: Sorting of q values was done wrong.
Tue, 19 Apr 2011 13:10:27 +0000 Ingo Weinzierl The list of annotations returned by the AnnotationFactory is ordered by its range.
Tue, 19 Apr 2011 12:33:39 +0000 Ingo Weinzierl Added a service that returns the MainValues of a Gauge based on a river name and a stationing.
Tue, 19 Apr 2011 12:31:07 +0000 Ingo Weinzierl Added a factory that returns MainValues.
Tue, 19 Apr 2011 11:05:27 +0000 Sascha L. Teichmann Discharge table: Added static method getWForQ() to interpolate a w value for a given q value based on a given discharge table.
Tue, 19 Apr 2011 10:32:31 +0000 Sascha L. Teichmann Discharge tables: Added convenience constructors/methods to ease the access to the master discharge table of a gauge.
Mon, 18 Apr 2011 16:01:23 +0000 Sascha L. Teichmann Moved the query complexity of creating a w/q value table into view
Mon, 18 Apr 2011 14:40:35 +0000 Sascha L. Teichmann Fetches w/q value tables from the backend.
Mon, 18 Apr 2011 13:23:12 +0000 Ingo Weinzierl Changed the error key that is written to the result document of the feed operation.
Mon, 18 Apr 2011 13:21:52 +0000 Ingo Weinzierl The inserted river is validated in the feed operation().
Mon, 18 Apr 2011 13:00:57 +0000 Ingo Weinzierl The calculation method is validated in the feed() operation.
Mon, 18 Apr 2011 12:36:08 +0000 Ingo Weinzierl The inserted ranges (distance and WQ ranges) are validated in the feed() operation.
Mon, 18 Apr 2011 09:34:18 +0000 Ingo Weinzierl Removed testing code that has been comitted by accident in the last revision.
Mon, 18 Apr 2011 07:39:17 +0000 Ingo Weinzierl The getGauge() method of the FLYSArtifact returns the first gauge based on the given stationing now.
Fri, 15 Apr 2011 13:47:10 +0000 Ingo Weinzierl The WQ state fills the DESCRIBE with default values for W and Q.
Fri, 15 Apr 2011 13:46:22 +0000 Ingo Weinzierl Added a WstFactory to return Wst objects.
Fri, 15 Apr 2011 13:37:51 +0000 Ingo Weinzierl FLYSArtifact provides methods to retrieve the real River, Gauge objects.
Fri, 15 Apr 2011 10:10:37 +0000 Ingo Weinzierl Bugfix: repaired broken imports of the session holder.
Fri, 15 Apr 2011 09:52:37 +0000 Ingo Weinzierl Removed the SessionHolder and adapted imports.
Thu, 14 Apr 2011 13:45:50 +0000 Sascha L. Teichmann Acquire/release sessions in services to avoid db connection leaks.
Thu, 14 Apr 2011 13:36:06 +0000 Ingo Weinzierl The location/distance state now writes default values into DESCRIBE.
Thu, 14 Apr 2011 13:26:29 +0000 Ingo Weinzierl Added a new function to RiverFactory that retrieves a River object based on a given river name.
Thu, 14 Apr 2011 13:15:16 +0000 Sascha L. Teichmann Backend access: Static methods are using the SessionHolder, too.
Thu, 14 Apr 2011 13:11:12 +0000 Ingo Weinzierl Finalized the SessionCallContextListener and registered it as CallContext.Listener in the configuration.
Thu, 14 Apr 2011 12:59:21 +0000 Ingo Weinzierl Bugfix: Call correct method to retrieve and initialize an instance of SessionFactoryProvider.
Thu, 14 Apr 2011 12:08:47 +0000 Sascha L. Teichmann Added a session holder to hold hibernate sessions.
Thu, 14 Apr 2011 11:18:28 +0000 Ingo Weinzierl Added an Implementation of CallContext.Listener to open/close Hibernate Sessions for each request.
Thu, 14 Apr 2011 08:32:18 +0000 Ingo Weinzierl Modified the states' describe() method - related to the last commit.
Thu, 14 Apr 2011 08:23:15 +0000 Ingo Weinzierl Removed the state to explicitly select a gauge.
Wed, 13 Apr 2011 08:31:20 +0000 Ingo Weinzierl Bugfix: Repaired the dynamic UI part of the RiverSelect state in DESCRIBE.
Tue, 12 Apr 2011 13:42:14 +0000 Ingo Weinzierl Write the name of an artifact into the DESCRIBE document.
Tue, 12 Apr 2011 07:49:36 +0000 Ingo Weinzierl Bugfix: States are filled with data before they describe themself.
Mon, 11 Apr 2011 12:54:03 +0000 Ingo Weinzierl Implemented a service that retrieves distance information for a specific river.
Wed, 06 Apr 2011 10:01:49 +0000 Ingo Weinzierl The FLYSArtifactCollection overrides out() and uses OutGenerators to create output for this operation.
Wed, 06 Apr 2011 09:56:38 +0000 Ingo Weinzierl Added a DischargeCurveGenerator that creates discharge curves.
Wed, 06 Apr 2011 09:53:14 +0000 Ingo Weinzierl Changed the visibility of getData() method of FLYSArtifacts.
Sun, 03 Apr 2011 10:55:16 +0000 Sascha L. Teichmann Removed trailing whitespace.
Sun, 03 Apr 2011 10:53:14 +0000 Sascha L. Teichmann Make project compilable again.
Thu, 31 Mar 2011 10:56:08 +0000 Ingo Weinzierl Added code to parse the configured OutGenerators in the global configuration and to save a map of such in the FLYSContext.
Thu, 31 Mar 2011 10:54:07 +0000 Ingo Weinzierl Added an OutGenerator interface that might be used to generator collected outputs of a set of artifacts.
Wed, 30 Mar 2011 16:00:51 +0000 Ingo Weinzierl Removed the Backend reference from FLYSArtifactCollection.
Wed, 30 Mar 2011 15:21:12 +0000 Ingo Weinzierl Enhanced the output mode for discharge curves with three facets.
Wed, 30 Mar 2011 13:47:02 +0000 Ingo Weinzierl Tagged RELEASE 0.1 of FLYS Artifacts.
Tue, 17 May 2011 07:51:26 +0000 Ingo Weinzierl Tagged RELEASE 2.3 of flys-client.
Mon, 16 May 2011 10:36:48 +0000 Hans Plum Added missing information for release
Mon, 16 May 2011 10:27:47 +0000 Hans Plum Added NEWS File for collecting enduser-sepcific information for releases
Fri, 13 May 2011 11:24:55 +0000 Ingo Weinzierl Prepared Changes for the upcoming release 2.3.
Fri, 13 May 2011 09:06:13 +0000 Sascha L. Teichmann Datacage: Better converter for incoming XML tree
Thu, 12 May 2011 16:47:23 +0000 Raimund Renkert ISSUE 61: Changed datacage button style.
Thu, 12 May 2011 15:42:37 +0000 Raimund Renkert ISSUE 46: Removed the table header context menu.
Thu, 12 May 2011 15:14:09 +0000 Raimund Renkert ISSUE 43: Changed i18n strings.
Thu, 12 May 2011 14:59:18 +0000 Raimund Renkert Show rivers as links instead of a combobox.
Thu, 12 May 2011 09:59:29 +0000 Ingo Weinzierl ISSUE-15 The charts in the chart panel are requested with the size of the parent panel.
Thu, 12 May 2011 09:14:46 +0000 Ingo Weinzierl Enabled the client to request charts in different sizes.
Thu, 12 May 2011 07:08:27 +0000 Ingo Weinzierl ISSUE-34 Limit the windows which are moved to the right lower corner to 10.
Wed, 11 May 2011 16:38:54 +0000 Sascha L. Teichmann Datacage: transport rpc result to ui.
Wed, 11 May 2011 15:33:54 +0000 Ingo Weinzierl Changed the height of the export panel.
Wed, 11 May 2011 14:34:15 +0000 Sascha L. Teichmann UI stub for data cage
Wed, 11 May 2011 14:29:35 +0000 Ingo Weinzierl ISSUE-56 Display download buttons to export the computed data.
Wed, 11 May 2011 14:23:08 +0000 Ingo Weinzierl Added a service to export data from the artifact server.
Wed, 11 May 2011 11:44:23 +0000 Raimund Renkert ISSUE 34: Move every new project window 20 px down and right.
Wed, 11 May 2011 11:07:18 +0000 Raimund Renkert ISSUE 44: Moved the location/range and WQ input tables to the helper panel and
Wed, 11 May 2011 10:04:49 +0000 Raimund Renkert Set the computation result panel width and height to 100%.
Wed, 11 May 2011 09:11:40 +0000 Ingo Weinzierl Parse the facets of a Collection and distinguish between an ordinary OutputMode and an ExportMode (new).
Wed, 11 May 2011 07:32:08 +0000 Ingo Weinzierl ISSUE-41 Moved the panel that shows the computation results right beside the parameterization - NOTE: issue is still open.
Wed, 11 May 2011 07:06:22 +0000 Ingo Weinzierl ISSUE-57 Replaced wrong i18n function call.
Tue, 10 May 2011 16:49:15 +0000 Ingo Weinzierl ISSUE-48 Added placeholder for the toolbar and the theme control in the chart output tab.
Tue, 10 May 2011 16:25:00 +0000 Ingo Weinzierl ISSUE-38 Set the first value of a select box as default value.
Tue, 10 May 2011 16:13:16 +0000 Ingo Weinzierl Added i18n error messages used in the adapted wq panel.
Tue, 10 May 2011 15:44:43 +0000 Raimund Renkert Changed the empty table message for the WQ input table.
Tue, 10 May 2011 15:36:07 +0000 Raimund Renkert Changed the empty table message for helper and data tables.
Tue, 10 May 2011 13:44:57 +0000 Sascha L. Teichmann Added stub for meta data service.
Tue, 10 May 2011 11:37:49 +0000 Raimund Renkert Fixed the location input. A range selection sets the correct location values
Tue, 10 May 2011 10:57:57 +0000 Raimund Renkert Remove the data table on step back.
Tue, 10 May 2011 10:03:00 +0000 Raimund Renkert Build a dynamic table for the CSV data.
Tue, 10 May 2011 06:48:46 +0000 Ingo Weinzierl Fixed attributes/namespaces in the XML document that is used to fetch the CSV export of WINFO computations.
Mon, 09 May 2011 16:22:11 +0000 Ingo Weinzierl Fixed a broken dependency in the maven pom file.
Mon, 09 May 2011 14:29:53 +0000 Raimund Renkert Added table and service for calculation output to UI.
Mon, 09 May 2011 13:51:39 +0000 Ingo Weinzierl Added radio buttons to choose between W/Q modes in the adapted WQ panel.
Mon, 09 May 2011 11:21:50 +0000 Ingo Weinzierl Bugfix: the current locale string is used to fetch chart images now.
Mon, 09 May 2011 10:31:54 +0000 Ingo Weinzierl Added a doubleclick listener to the project list to open a project.
Mon, 09 May 2011 10:23:20 +0000 Sascha L. Teichmann Removed superfluous imports.
Mon, 09 May 2011 10:20:45 +0000 Ingo Weinzierl Changed the wording when speaking about kilometer ranges.
Thu, 05 May 2011 15:42:38 +0000 Raimund Renkert Enable or disable table rows depending on the WQ selection.
Thu, 05 May 2011 13:32:36 +0000 Raimund Renkert Implemented handler for WQ value selection.
Thu, 05 May 2011 09:51:51 +0000 Raimund Renkert Added table for WQ inputs.
Thu, 05 May 2011 09:33:15 +0000 Ingo Weinzierl Implemented the createOld() of WQAdaptedInputPanel.
Thu, 05 May 2011 08:09:03 +0000 Ingo Weinzierl The WQAdaptedInputPanel displays input fields for each gauge and returns the correct w/q values now.
Wed, 04 May 2011 14:54:38 +0000 Raimund Renkert Added new WQ info service and data structures.
Wed, 04 May 2011 14:40:50 +0000 Raimund Renkert Do not update the locations table if no data is cached.
Wed, 04 May 2011 14:05:40 +0000 Ingo Weinzierl Added a stub implementation of a WQ panel for discharge longitudinal section computations.
Wed, 04 May 2011 13:02:00 +0000 Raimund Renkert Fixed the single location input panel.
Wed, 04 May 2011 08:41:55 +0000 Ingo Weinzierl Renamed non-computed discharge curve outputs.
Wed, 04 May 2011 07:36:20 +0000 Ingo Weinzierl Added i18n strings for the computed discharge curve.
Tue, 03 May 2011 16:22:27 +0000 Ingo Weinzierl Added new i18n strings for new output modes.
Tue, 03 May 2011 13:52:14 +0000 Raimund Renkert Added new UI provider for single location selection.
Mon, 02 May 2011 16:41:35 +0000 Raimund Renkert Cash the table data and rebuild the location table on distance selection.
Mon, 02 May 2011 14:54:11 +0000 Ingo Weinzierl Introduced two further parameters in the WQ panel to determine the selection mode (range/single, w/q).
Mon, 02 May 2011 14:47:12 +0000 Raimund Renkert Added location and distance tables.
Mon, 02 May 2011 10:18:56 +0000 Ingo Weinzierl Bugfix: the WQ panel now returns the correct step width value if the range mode is selected.
Fri, 29 Apr 2011 10:12:02 +0000 Raimund Renkert Prepared UI elements for the location and distance input tables.
Thu, 28 Apr 2011 12:50:42 +0000 Ingo Weinzierl Added i18n strings for a longitudinal section curve.
Thu, 28 Apr 2011 09:56:06 +0000 Raimund Renkert Added class diagrams for the client ui.
Mon, 18 Apr 2011 13:27:49 +0000 Ingo Weinzierl Added error messages that are displayed during the feed operation.
Thu, 14 Apr 2011 07:53:01 +0000 Ingo Weinzierl Each service is now called with the name of the current locale to set the request object's locale manually in the HttpClient.
Tue, 12 Apr 2011 13:48:11 +0000 Ingo Weinzierl The title of a the ParameterList tab depends on the Artifact's name if we create a new project window with an existing Artifact.
Tue, 12 Apr 2011 13:46:33 +0000 Ingo Weinzierl We can now distinuish between different artifact types based on its name in the DESCRIBE. The ArtifactCreator returns concrete instances of Artifacts now.
Tue, 12 Apr 2011 13:11:46 +0000 Ingo Weinzierl The project list is sorted now.
Tue, 12 Apr 2011 11:01:09 +0000 Ingo Weinzierl Filled the context menu point 'Open project' of the ProjectList with life - it opens a new window displaying the parameterization of the selected project.
Tue, 12 Apr 2011 10:54:59 +0000 Ingo Weinzierl Improved the CollectionView and the ParameterList - both can be initialized with an existing artifact (parameterization).
Tue, 12 Apr 2011 10:51:39 +0000 Ingo Weinzierl Added more i18n error messages.
Tue, 12 Apr 2011 10:50:32 +0000 Ingo Weinzierl The CollectionRecord implements a method that returns the Collection objects which is represented by the record now.
Tue, 12 Apr 2011 07:56:33 +0000 Ingo Weinzierl Added a new service to query an artifact description.
Mon, 11 Apr 2011 15:38:43 +0000 Ingo Weinzierl Implemented a context menu for the project list.
Mon, 11 Apr 2011 14:32:36 +0000 Ingo Weinzierl Implemented a service to fetch distance information of a river from the artifact server.
Mon, 11 Apr 2011 14:29:54 +0000 Ingo Weinzierl Added a model class that represents a distance information.
Fri, 08 Apr 2011 10:05:14 +0000 Ingo Weinzierl Improved the exception handling - added warnings for user authentication errors and errors that occur while fetching supported rivers.
Fri, 08 Apr 2011 09:51:41 +0000 Ingo Weinzierl Added an exception class that should be used if the user authentication fails.
Fri, 08 Apr 2011 08:51:28 +0000 Ingo Weinzierl Improved the exception handling of artifact / collection specific operations. Warning dialog are displayed after such an exception.
Fri, 08 Apr 2011 08:45:15 +0000 Ingo Weinzierl Added a new exception class that is used to be thrown after artifact / collection operation specific errors.
Thu, 07 Apr 2011 11:31:19 +0000 Ingo Weinzierl The ChartOutputTab calls the out() operation of a Collection now - no longer the out() of its first artifact.
Thu, 07 Apr 2011 10:33:48 +0000 Ingo Weinzierl Fixed the function to toggle the language and added a warning dialog that informs the user about the creation of a new session.
Tue, 05 Apr 2011 08:13:48 +0000 Ingo Weinzierl Removed the FLYSMessages interface and replaced it with a FLYSConstants interface - this interface has the ability to lookup i18n strings with given keys.
Tue, 05 Apr 2011 06:25:17 +0000 Ingo Weinzierl Implemented the button to toggle the current locale.
Tue, 05 Apr 2011 06:24:13 +0000 Ingo Weinzierl Added missing i18n footer strings.
Wed, 30 Mar 2011 13:49:28 +0000 Ingo Weinzierl Tagged RELEASE 0.1 of FLYS Client.
Fri, 28 Sep 2012 12:14:07 +0200 Thomas Arendsen Hein merged flys-backend/0.1 0.1
Mon, 28 Mar 2011 14:32:42 +0000 Sascha L. Teichmann Fixed swap of operands in importer.
Mon, 28 Mar 2011 09:46:24 +0000 Sascha L. Teichmann Forgot to save the last change before commit.
Mon, 28 Mar 2011 09:06:30 +0000 Sascha L. Teichmann Added methods to find out if two ranges intersects.
Thu, 24 Mar 2011 16:47:05 +0000 Sascha L. Teichmann Added an one to many relation to the discharge tables of a gauge.
Wed, 23 Mar 2011 16:33:36 +0000 Sascha L. Teichmann Finished import of WSTs.
Wed, 23 Mar 2011 15:22:32 +0000 Sascha L. Teichmann Build models for wsts, wst columns and q ranges and store them in the backend.
Wed, 23 Mar 2011 10:46:58 +0000 Sascha L. Teichmann Add a hack to repair the units in WST files extraction.
Tue, 22 Mar 2011 15:48:09 +0000 Sascha L. Teichmann Ported over some WST parsing stuff from desktop flys
Tue, 22 Mar 2011 12:15:18 +0000 Ingo Weinzierl Added import code for importing discharge tables.
Tue, 22 Mar 2011 11:10:01 +0000 Sascha L. Teichmann Added stub for WST parser.
Tue, 22 Mar 2011 11:01:51 +0000 Sascha L. Teichmann Added importer helper model stubs for WST imports.
Mon, 21 Mar 2011 15:06:47 +0000 Sascha L. Teichmann Second part of parsing/storing main values. Should be finished now.
Mon, 21 Mar 2011 10:52:33 +0000 Sascha L. Teichmann Fixed wrong unique constraint.
Mon, 21 Mar 2011 10:41:47 +0000 Sascha L. Teichmann Add forgotten column river_id in Gauges.
Mon, 21 Mar 2011 10:27:14 +0000 Sascha L. Teichmann Added missing ImportGauge.getPeer() method

http://dive4elements.wald.intevation.org