Wed, 30 Oct 2013 16:03:28 +0100 |
Felix Wolfsteller |
issue1345: i18n for dc.
|
Wed, 30 Oct 2013 15:51:33 +0100 |
Andre Heinecke |
Dokumention zur Installation erweitert
|
Wed, 30 Oct 2013 15:26:21 +0100 |
Sascha L. Teichmann |
Experimental caching of datacage recommendations. The respective hook is called a lot and running the datacage over and over again when loading data can be expensive. So the generated recommendations are cached for some time.
|
Wed, 30 Oct 2013 15:02:16 +0100 |
Felix Wolfsteller |
issue1512: Fix loading of all former flow vel. calculation via folder.
|
Wed, 30 Oct 2013 14:53:26 +0100 |
Felix Wolfsteller |
issue1512: Show all flowvelocity facet in former calc. flow vel. part of dc.
|
Wed, 30 Oct 2013 12:24:03 +0100 |
Felix Wolfsteller |
issue1571: i18n.
|
Wed, 30 Oct 2013 12:03:07 +0100 |
Felix Wolfsteller |
issue1572: Call longitudinal-section-user-prototype for bedheight-diffs/year.
|
Wed, 30 Oct 2013 11:59:09 +0100 |
Sascha L. Teichmann |
Merged
|
Wed, 30 Oct 2013 11:58:57 +0100 |
Sascha L. Teichmann |
Datacage: Remove tree branches vom datacage tree on client side which do not contain loadable data.
|
Wed, 30 Oct 2013 11:57:04 +0100 |
Sascha L. Teichmann |
Simplified recommendattion monitor code a bit.
|
Wed, 30 Oct 2013 11:56:13 +0100 |
Sascha L. Teichmann |
Code cleanup.
|
Wed, 30 Oct 2013 11:55:10 +0100 |
Sascha L. Teichmann |
Fix for flys/issue1654: Divide through denisity, do not multiply.
|
Tue, 29 Oct 2013 19:59:59 +0100 |
Tom Gottfried |
Schema change: add lookup table for sediment yield kinds to have its values documented.
|
Tue, 29 Oct 2013 19:46:41 +0100 |
Sascha L. Teichmann |
flys/issue1625: Changed default sediment density factor from 1.8 to 1.9 . The value can be changed by adusting conf.xml (/artifact-databae/options/sediment-density-factor/text()).
|
Tue, 29 Oct 2013 19:17:28 +0100 |
Tom Gottfried |
Importer: document where annotations are searched for.
|
Tue, 29 Oct 2013 18:57:40 +0100 |
Tom Gottfried |
run_geo.sh: allow logging as documented.
|
Tue, 29 Oct 2013 11:32:56 +0100 |
Felix Wolfsteller |
issue1397: Fix reference_curve former calculations in dc.
|
Tue, 29 Oct 2013 11:31:59 +0100 |
Felix Wolfsteller |
dc i18n.
|
Tue, 29 Oct 2013 10:42:12 +0100 |
Felix Wolfsteller |
issue1512: Repair loading all of flowvelocitymeasurements by not equipping
|
Mon, 28 Oct 2013 15:46:26 +0100 |
Andre Heinecke |
inor Layout + Wiki
|
Mon, 28 Oct 2013 14:22:02 +0100 |
Andre Heinecke |
Rechtschreibkorrektur (durchgeführt von Bettina)
|
Mon, 28 Oct 2013 14:15:53 +0100 |
Andre Heinecke |
More installation documentation
|
Mon, 28 Oct 2013 12:14:46 +0100 |
Felix Wolfsteller |
issue1345: Sort sediment densities by year.
|
Mon, 28 Oct 2013 11:52:14 +0100 |
Felix Wolfsteller |
meta-data.xml: Simplify query for densities a bit, sort by depth.
|
Sun, 27 Oct 2013 17:30:38 +0100 |
Andre Heinecke |
Start installation documentation for specific client installation
|
Fri, 25 Oct 2013 17:06:30 +0200 |
Tom Gottfried |
Importer doc: fix some outdated or wrong infos.
|
Fri, 25 Oct 2013 16:57:15 +0200 |
Tom Gottfried |
Importer and doc: Warn instead of die if AT- or STA-file is missing for a gauge.
|
Fri, 25 Oct 2013 14:32:11 +0200 |
Felix Wolfsteller |
FacetTypes: Cosmetics.
|
Fri, 25 Oct 2013 14:31:56 +0200 |
Felix Wolfsteller |
Declare certain bedheight-diagrams as charttypes, for manual points.
|
Fri, 25 Oct 2013 14:29:38 +0200 |
Felix Wolfsteller |
meta-data.xml: Include bedheight-diffs per year in minfo-user-dc.
|
Fri, 25 Oct 2013 14:10:29 +0200 |
Felix Wolfsteller |
meta-data.xml: Subsume the different bed-quality dc-nodes.
|
Fri, 25 Oct 2013 13:53:48 +0200 |
Felix Wolfsteller |
i18n for dc added.
|
Fri, 25 Oct 2013 13:52:47 +0200 |
Felix Wolfsteller |
meta-data.xml: Ease i18nability.
|
Fri, 25 Oct 2013 15:39:59 +0200 |
Tom Gottfried |
Geoimporter: be case-insensitive when looking for floodplains.
|
Fri, 25 Oct 2013 15:02:08 +0200 |
Tom Gottfried |
make-opt-package.sh: give path to internal 'repository'.
|
Fri, 25 Oct 2013 07:25:19 +0200 |
Felix Wolfsteller |
meta-data.xml: Remove duplicates and 'special' macros fro special outs from
|
Fri, 25 Oct 2013 07:24:15 +0200 |
Felix Wolfsteller |
meta-data.xml: Remove delta-wt from longitudinal-section-user-prototype .
|
Fri, 25 Oct 2013 07:16:16 +0200 |
Felix Wolfsteller |
Fix Typo in german i18n (e.g. issue1345) .
|
Wed, 23 Oct 2013 17:45:56 +0200 |
Felix Wolfsteller |
Partly revert rev 7419, conservative guess about which "outs" are handcrafted.
|
Fri, 25 Oct 2013 03:47:04 +0200 |
Sascha L. Teichmann |
Experimental patch: Do not run datacage on artifacts that are loaded from datacage. His hopefully minimizes the datacage runs when a lot of data is loaded.
|
Thu, 24 Oct 2013 23:06:40 +0200 |
Tom Gottfried |
Importer doc: fix some layout issues.
|
Wed, 23 Oct 2013 17:20:55 +0200 |
Felix Wolfsteller |
Made SedimentDensityValue Serializable.
|
Wed, 23 Oct 2013 17:20:30 +0200 |
Felix Wolfsteller |
issue1345: Re-enable sediment load total loads, now that factory is fixed.
|
Wed, 23 Oct 2013 17:19:30 +0200 |
Felix Wolfsteller |
Fix total sediment load fetching.
|
Wed, 23 Oct 2013 17:08:07 +0200 |
Felix Wolfsteller |
issue1345: Showing sediment densitie by depth, comment total load.
|
Wed, 23 Oct 2013 14:53:47 +0200 |
Tom Gottfried |
Fix typo.
|
Wed, 23 Oct 2013 12:43:26 +0200 |
Andre Heinecke |
(issue965) Handle the case that diffids are not available
|
Wed, 23 Oct 2013 12:09:36 +0200 |
Felix Wolfsteller |
meta-data.xml: Be less restrictive in showing facets from waterlevels-discharge.
|
Wed, 23 Oct 2013 12:08:30 +0200 |
Felix Wolfsteller |
meta-data.xml: Exclude empty.facet s.
|
Wed, 23 Oct 2013 12:07:35 +0200 |
Felix Wolfsteller |
meta-meta.xml: Also fetch extreme_base curves via dc.
|
Wed, 23 Oct 2013 12:07:05 +0200 |
Felix Wolfsteller |
meta-data.xml: cosmetics.
|
Wed, 23 Oct 2013 11:41:24 +0200 |
Felix Wolfsteller |
Add another axis (height) to longitudinal-diagram-defaults.
|
Wed, 23 Oct 2013 11:33:31 +0200 |
Felix Wolfsteller |
meta-data.xml: Cosmetics.
|
Wed, 23 Oct 2013 11:22:47 +0200 |
Felix Wolfsteller |
meta-data.xml: More usage of collection-group-macro.
|
Wed, 23 Oct 2013 11:28:25 +0200 |
Sascha L. Teichmann |
Datacage: Consequently call macro 'longitudinal-section-user-prototype' in all longitudinal sections of old calculation. Moved asymmeterical stuff to prototype. This may crash!
|
Wed, 23 Oct 2013 11:04:06 +0200 |
Felix Wolfsteller |
meta-data.xml: Create and use collection-group macro.
|
Wed, 23 Oct 2013 09:59:46 +0200 |
Tom Gottfried |
BedHeightSingleParser: fix no-data-line detection.
|
Wed, 23 Oct 2013 08:20:11 +0200 |
Sascha L. Teichmann |
Datacage ref doc: More docs on functions.
|
Tue, 22 Oct 2013 17:00:47 +0200 |
Sascha L. Teichmann |
Datacage ref doc: More docs for functions.
|
Tue, 22 Oct 2013 16:24:08 +0200 |
Felix Wolfsteller |
issue1205: made SedimentDensity serializable.
|
Tue, 22 Oct 2013 15:51:33 +0200 |
Felix Wolfsteller |
meta-data.xml: Switch more longitudinal-section like user-dc content to prototype macro.
|
Tue, 22 Oct 2013 15:43:13 +0200 |
Sascha L. Teichmann |
Datacage: Fixed macro call.
|
Tue, 22 Oct 2013 15:34:51 +0200 |
Sascha L. Teichmann |
Fixed meta-data.xml
|
Tue, 22 Oct 2013 15:07:24 +0200 |
Sascha L. Teichmann |
Datacage ref doc: More doc for functions.
|
Tue, 22 Oct 2013 12:21:21 +0200 |
Felix Wolfsteller |
issue1512: Sort flow-velocity-models by discharge_zone.value.
|
Tue, 22 Oct 2013 12:15:33 +0200 |
Felix Wolfsteller |
issue1473: Show differences project name in dc.
|
Tue, 22 Oct 2013 11:57:17 +0200 |
Felix Wolfsteller |
meta-data.xml: Fix referenced out for discharge_longitudinal_section.
|
Mon, 21 Oct 2013 19:05:41 +0200 |
Andre Heinecke |
(issue965) Add a comment to explain what we do here
|
Mon, 21 Oct 2013 18:57:30 +0200 |
Andre Heinecke |
(issue965) Use new datacage magic to have year filtering for bedheights
|
Mon, 21 Oct 2013 17:54:34 +0200 |
Tom Gottfried |
Importer doc: mention flow direction retrieval from WST.
|
Mon, 21 Oct 2013 17:43:01 +0200 |
Sascha L. Teichmann |
Removed dc:to-date(). Added 'date' type for <dc:convert> instead.
|
Mon, 21 Oct 2013 12:21:40 +0200 |
Felix Wolfsteller |
issue1521: Adhere more to dc 'spec', show discharges of flow velocity models.
|
Mon, 21 Oct 2013 12:22:40 +0200 |
Sascha L. Teichmann |
Datacage reference doc: Explain dc:container-context and dc:properties.
|
Mon, 21 Oct 2013 11:43:50 +0200 |
Sascha L. Teichmann |
Datacage: Added TODOs for new functions in ref document.
|
Mon, 21 Oct 2013 11:28:14 +0200 |
Felix Wolfsteller |
issue1512: Make double entry of Q facet for flowvelocities dissappear.
|
Fri, 18 Oct 2013 16:41:10 +0200 |
Felix Wolfsteller |
Fix typo in german i18n.
|
Fri, 18 Oct 2013 12:20:55 +0200 |
Felix Wolfsteller |
issue1512: improved i18n for flow velocity measurement facets.
|
Thu, 17 Oct 2013 16:15:14 +0200 |
Felix Wolfsteller |
BedHeightProcessor: Finally display heights, not widths.
|
Thu, 17 Oct 2013 15:36:13 +0200 |
Felix Wolfsteller |
BedHeightProcessor: Set axis label.
|
Thu, 17 Oct 2013 15:36:00 +0200 |
Felix Wolfsteller |
BedHeight(Sounding)Processor: Use FacetTypes.
|
Thu, 17 Oct 2013 15:23:07 +0200 |
Felix Wolfsteller |
Removed debris.
|
Thu, 17 Oct 2013 15:21:57 +0200 |
Felix Wolfsteller |
Moved BedHeightEpoch to BedHeightEpochData.
|
Thu, 17 Oct 2013 15:08:59 +0200 |
Felix Wolfsteller |
Renamed artifacts/**/BedHeight(Single) to BedHeight(Single)Data, to resolve
|
Thu, 17 Oct 2013 11:12:14 +0200 |
Felix Wolfsteller |
Stub for new BedHeightProcessor.
|
Thu, 17 Oct 2013 10:53:34 +0200 |
Felix Wolfsteller |
BedHeightSoundingProcessor: Log if data is now handled.
|
Thu, 17 Oct 2013 10:50:04 +0200 |
Felix Wolfsteller |
BedHeightSoundingProcessor: refactored to avoid drifting behavior when using
|
Thu, 17 Oct 2013 09:40:12 +0200 |
Felix Wolfsteller |
meta-data.xml: cleanup longitudinal-section-user-prototype, removing dupes.
|
Mon, 21 Oct 2013 10:49:39 +0200 |
Sascha L. Teichmann |
Removed same package import.
|
Mon, 21 Oct 2013 10:48:51 +0200 |
Sascha L. Teichmann |
Removed obsolete import.
|
Fri, 18 Oct 2013 18:40:50 +0200 |
Sascha L. Teichmann |
Datacage: Add function dc:to-date(number) which converts a epoch base number to a date object.
|
Fri, 18 Oct 2013 18:36:18 +0200 |
Sascha L. Teichmann |
Datacage: Added dc:min-number(list) and dc:max-number(list) to extract the numerical
|
Fri, 18 Oct 2013 18:15:33 +0200 |
Sascha L. Teichmann |
Datacage: Add function dc:find-all(needle, haystack).
|
Fri, 18 Oct 2013 15:44:01 +0200 |
Andre Heinecke |
(issue1474) Fix deepCopy signatures and actually copy the facet index now
|
Fri, 18 Oct 2013 15:30:44 +0200 |
Andre Heinecke |
(issue1071) Handle the case where no MeasurementStation exists
|
Thu, 17 Oct 2013 18:56:44 +0200 |
Sascha L. Teichmann |
More datacage ref doc.
|
Thu, 17 Oct 2013 18:37:56 +0200 |
Andre Heinecke |
(issue1474) Fix copying of SQ* Facets
|
Thu, 17 Oct 2013 17:47:58 +0200 |
Tom Gottfried |
Importer: Avoid 0-lenght Q-ranges in WST-CSV-parsers.
|
Thu, 17 Oct 2013 15:26:12 +0200 |
Sascha L. Teichmann |
Replaced more tabs with spaces + minor cosmetics (removed out commented code from double precision branch).
|
Thu, 17 Oct 2013 15:13:32 +0200 |
Sascha L. Teichmann |
Replaced tabs with 4 spaces.
|
Thu, 17 Oct 2013 15:05:08 +0200 |
Tom Gottfried |
WstParser: Do not add Q-range for trailing Q-line.
|
Thu, 17 Oct 2013 12:14:10 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
Thu, 17 Oct 2013 12:11:09 +0200 |
Sascha L. Teichmann |
Removed obsolete import + whitespace cleanup.
|
Thu, 17 Oct 2013 08:29:46 +0200 |
Felix Wolfsteller |
Add getModelDescription to FlowVelocityModel.
|
Thu, 17 Oct 2013 07:48:51 +0200 |
Felix Wolfsteller |
White space cosmetics, added debug output.
|
Thu, 17 Oct 2013 07:46:36 +0200 |
Felix Wolfsteller |
SedimentYieldArtifact: Accept 'total' load, genreate facet for it.
|
Thu, 17 Oct 2013 07:45:41 +0200 |
Felix Wolfsteller |
FlowVelocityModelArtifact: Slightly improve facet names.
|
Thu, 17 Oct 2013 07:45:13 +0200 |
Felix Wolfsteller |
Cosmetics.
|
Thu, 17 Oct 2013 07:44:34 +0200 |
Felix Wolfsteller |
Cosmetics.
|
Thu, 17 Oct 2013 07:42:31 +0200 |
Felix Wolfsteller |
issue1473: Let vollmer curves appear under 'former calc/waterlevels from fix.'.
|
Thu, 17 Oct 2013 07:39:42 +0200 |
Felix Wolfsteller |
cosmetics.
|
Wed, 16 Oct 2013 15:25:56 +0200 |
Felix Wolfsteller |
Adjusted i18n to match the one in client.
|
Wed, 16 Oct 2013 18:48:02 +0200 |
Andre Heinecke |
Use more failsave pattern for SQ-facets.
|
Wed, 16 Oct 2013 18:46:43 +0200 |
Andre Heinecke |
Configure correct name for SQ-relation C-chart.
|
Wed, 16 Oct 2013 15:23:04 +0200 |
Felix Wolfsteller |
i18n for total load dc.
|
Wed, 16 Oct 2013 15:22:18 +0200 |
Felix Wolfsteller |
Offer total loads in dc.
|
Wed, 16 Oct 2013 15:21:14 +0200 |
Felix Wolfsteller |
Added i18n for upcoming total load via dc.
|
Wed, 16 Oct 2013 10:42:45 +0200 |
Felix Wolfsteller |
Refactoring: Move functionality of BedHeightAccess into BedHeightFacet for now.
|
Wed, 16 Oct 2013 10:33:09 +0200 |
Felix Wolfsteller |
Minor BedHeightAccess refactoring.
|
Wed, 16 Oct 2013 14:43:27 +0200 |
Tom Gottfried |
Remove code that was previously commented out.
|
Wed, 16 Oct 2013 14:40:19 +0200 |
Tom Gottfried |
BedHeightSingleParser: do not omit lines if last column is empty.
|
Wed, 16 Oct 2013 13:06:30 +0200 |
Sascha L. Teichmann |
Jim, he's dead.
double-precision
|
Wed, 16 Oct 2013 13:03:13 +0200 |
Sascha L. Teichmann |
Merged double-precision branch.
|
Wed, 16 Oct 2013 12:57:40 +0200 |
Sascha L. Teichmann |
Merge branch default
double-precision
|
Wed, 16 Oct 2013 12:39:33 +0200 |
Sascha L. Teichmann |
Reorder generation of static part of describe document for fast XML DOM handling.
|
Wed, 16 Oct 2013 12:00:29 +0200 |
Andre Heinecke |
(issue1353) Document that there are more things to syncing then just the Number
|
Wed, 16 Oct 2013 11:45:23 +0200 |
Andre Heinecke |
(issue1474) Add sqrelation user data and disable filtering for it
|
Wed, 16 Oct 2013 11:42:53 +0200 |
Andre Heinecke |
Add debug output for variables in user context
|
Tue, 15 Oct 2013 17:01:20 +0200 |
Andre Heinecke |
Break sometimes when dumping variables. Still ugly but a bit nicer.
|
Wed, 16 Oct 2013 10:18:19 +0200 |
Tom Gottfried |
Importer doc: fix syntax error.
double-precision
|
Wed, 16 Oct 2013 09:56:15 +0200 |
Tom Gottfried |
BedHeightSingleParser: do not log every data line in file.
double-precision
|
Tue, 15 Oct 2013 19:49:25 +0200 |
Tom Gottfried |
Do not log trace of WST-Parser parse exception and document it.
double-precision
|
Tue, 15 Oct 2013 19:19:45 +0200 |
Tom Gottfried |
WST-Parser: check consistence of station ordering in file.
double-precision
|
Tue, 15 Oct 2013 19:18:44 +0200 |
Tom Gottfried |
Comments.
double-precision
|
Tue, 15 Oct 2013 18:41:55 +0200 |
Tom Gottfried |
Merged changes from default into double precision branch.
double-precision
|
Tue, 15 Oct 2013 18:31:59 +0200 |
Sascha L. Teichmann |
WST Import: Added parse error exception to WST parser.
|
Tue, 15 Oct 2013 17:39:04 +0200 |
Felix Wolfsteller |
typo fix in doc.
|
Tue, 15 Oct 2013 17:38:50 +0200 |
Felix Wolfsteller |
BedHeightsArtifact: Use FacetTypes, eliminate local facet type definition.
|
Tue, 15 Oct 2013 17:31:44 +0200 |
Felix Wolfsteller |
Prepare new facet types for bedheights.
|
Tue, 15 Oct 2013 16:41:18 +0200 |
Felix Wolfsteller |
i18n for old calculations dc.
|
Tue, 15 Oct 2013 15:32:36 +0200 |
Tom Gottfried |
Importer manual: use unique revision identifier.
double-precision
|
Tue, 15 Oct 2013 15:37:54 +0200 |
Felix Wolfsteller |
Add aforementioned user-prototype.
|
Tue, 15 Oct 2013 15:37:24 +0200 |
Felix Wolfsteller |
Prototypically add longitudinal-section-user-prototype, with issues.
|
Tue, 15 Oct 2013 15:25:09 +0200 |
Tom Gottfried |
Importer packaging: run pdflatex three times to get references and page numbering right.
double-precision
|
Tue, 15 Oct 2013 15:06:29 +0200 |
Felix Wolfsteller |
issue1345: Show bedheight_type in tooltip.
|
Tue, 15 Oct 2013 15:03:51 +0200 |
Felix Wolfsteller |
issue1345: Bring back waterlevel/diffs from fixation into minfo dc element.
|
Tue, 15 Oct 2013 14:41:39 +0200 |
Felix Wolfsteller |
Fix DC group-by statement, there is no 'oid' variable around.
|
Tue, 15 Oct 2013 07:06:19 +0200 |
Felix Wolfsteller |
issue1345: DC: group bed heights of single years by year.
|
Tue, 15 Oct 2013 14:45:46 +0200 |
Tom Gottfried |
Importer: skip historical discharge tables per default as they come via ETL.
double-precision
|
Tue, 15 Oct 2013 10:11:38 +0200 |
Tom Gottfried |
Add warning on errors when importing duplicates.
double-precision
|
Mon, 14 Oct 2013 17:41:19 +0200 |
Felix Wolfsteller |
issue1345: Fix sediment load facet type, adjust theme name.
|
Mon, 14 Oct 2013 17:40:31 +0200 |
Felix Wolfsteller |
have same translations for sediment loads fractions.
|
Mon, 14 Oct 2013 16:38:16 +0200 |
Sascha L. Teichmann |
Datacage doc ref: Explain dc:group
|
Mon, 14 Oct 2013 16:06:36 +0200 |
Sascha L. Teichmann |
Datacage ref doc: Explain dc:filter.
|
Mon, 14 Oct 2013 15:55:36 +0200 |
Sascha L. Teichmann |
Datacage ref doc: Move dc:if & dc:choose up because they are more important than other elements.
|
Mon, 14 Oct 2013 15:53:06 +0200 |
Sascha L. Teichmann |
Datacage ref doc: Explain dc:for-each
|
Mon, 14 Oct 2013 15:43:34 +0200 |
Sascha L. Teichmann |
Datacage ref doc: Explain dc:virtual-column.
|
Mon, 14 Oct 2013 15:27:49 +0200 |
Sascha L. Teichmann |
Datacage ref doc: Explain dc:macro & Co.
|
Mon, 14 Oct 2013 14:40:51 +0200 |
Sascha L. Teichmann |
Datacage ref doc: Explain dc:variable and dc:convert.
|
Mon, 14 Oct 2013 13:44:54 +0200 |
Sascha L. Teichmann |
Dataage ref doc: Explain dc:context, dc:comment
|
Mon, 14 Oct 2013 13:08:33 +0200 |
Sascha L. Teichmann |
Datacage ref doc: More structure. Explain text interpolation.
|
Mon, 14 Oct 2013 12:16:33 +0200 |
Felix Wolfsteller |
Added sedimentdensity i18n.
|
Mon, 14 Oct 2013 12:15:34 +0200 |
Felix Wolfsteller |
issue1345: Added getDepth() to SedimentDensityFactory.
|
Mon, 14 Oct 2013 12:14:20 +0200 |
Felix Wolfsteller |
issue1345: Change Sediment Density Facet label.
|
Mon, 14 Oct 2013 11:49:15 +0200 |
Felix Wolfsteller |
SedimentDensityProcessor: Fix, use getAllDensities instead of only dens. in year 2006.
|
Mon, 14 Oct 2013 11:48:38 +0200 |
Felix Wolfsteller |
SedimentDensity: Fix getAllDensities and made it public.
|
Mon, 14 Oct 2013 10:01:33 +0200 |
Felix Wolfsteller |
i18n for dc and facet name generation.
|
Mon, 14 Oct 2013 09:55:41 +0200 |
Felix Wolfsteller |
cosmetics.
|
Mon, 14 Oct 2013 09:53:54 +0200 |
Felix Wolfsteller |
issue1345: Adjust name of sediment yield/load facets to include fraction name and times.
|
Mon, 14 Oct 2013 09:52:17 +0200 |
Felix Wolfsteller |
issue1345: Prepare SedimentLoadFactory to deliver fraction name and time ranges.
|
Mon, 14 Oct 2013 09:51:27 +0200 |
Felix Wolfsteller |
cosmetics.
|
Mon, 14 Oct 2013 07:33:32 +0200 |
Felix Wolfsteller |
Comment in meta-data.xml.
|
Mon, 14 Oct 2013 07:31:32 +0200 |
Felix Wolfsteller |
cosmetical description fix.
|
Sat, 12 Oct 2013 10:26:45 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
Fri, 11 Oct 2013 18:40:33 +0200 |
Andre Heinecke |
(issue1529) Be more tolerant in the fitting.
|
Fri, 11 Oct 2013 17:11:15 +0200 |
Andre Heinecke |
(issue1529) Only interpolate within a step limit in WQ diagram
|
Fri, 11 Oct 2013 15:35:25 +0200 |
Andre Heinecke |
Polish SQ Datacage and Facets
|
Fri, 11 Oct 2013 12:44:25 +0200 |
Felix Wolfsteller |
doc fix <3 .
|
Fri, 11 Oct 2013 12:40:52 +0200 |
Felix Wolfsteller |
doc fix.
|
Fri, 11 Oct 2013 12:38:57 +0200 |
Felix Wolfsteller |
Doc typo fix.
|
Fri, 11 Oct 2013 12:26:00 +0200 |
Felix Wolfsteller |
issue1345: include fix for display of epochs stoptime.
|
Fri, 11 Oct 2013 12:23:27 +0200 |
Felix Wolfsteller |
issue1512: conf.xml: configure flowvelocitymodel artifact-factory.
|
Fri, 11 Oct 2013 12:22:40 +0200 |
Felix Wolfsteller |
issue1512: Adde flow-velocity-models dc conf.
|
Fri, 11 Oct 2013 12:18:38 +0200 |
Felix Wolfsteller |
issue1345: Added accidentally ommitted i18n for sedimentload dc.
|
Fri, 11 Oct 2013 12:15:01 +0200 |
Felix Wolfsteller |
issue1512: spawn more facets for FlowVelocityMeasurementArtifact .
|
Fri, 11 Oct 2013 12:12:52 +0200 |
Felix Wolfsteller |
issue1512: Adjusted Q and WOutProcessors to handle data
|
Fri, 11 Oct 2013 11:44:21 +0200 |
Felix Wolfsteller |
More doc fixes.
|
Fri, 11 Oct 2013 11:42:56 +0200 |
Felix Wolfsteller |
Processor: Doc.
|
Fri, 11 Oct 2013 10:30:26 +0200 |
Felix Wolfsteller |
issue1512: Added method to get FlowVelocityModel by id.
|
Fri, 11 Oct 2013 10:29:37 +0200 |
Felix Wolfsteller |
issue1512: Initial commit of FlowVelocityModelArtifact.
|
Fri, 11 Oct 2013 10:28:07 +0200 |
Felix Wolfsteller |
issue1512: FlowVelocityCalculation: Opened prepareData(), added doc.
|
Fri, 11 Oct 2013 10:26:18 +0200 |
Felix Wolfsteller |
issue1512: Added comment, opened constructor as we will reuse this class.
|
Fri, 11 Oct 2013 10:25:34 +0200 |
Felix Wolfsteller |
issue1512: Prepare new facet types for flow velocity model facet, add comment.
|
Thu, 10 Oct 2013 18:34:04 +0200 |
Sascha L. Teichmann |
Fixings overview panel: Send valid encoded JSON filters to server part of the client.
|
Thu, 10 Oct 2013 11:27:56 +0200 |
Felix Wolfsteller |
issue1345: Factored out description creation for loads. Make epochs show end time.
|
Thu, 10 Oct 2013 11:22:16 +0200 |
Felix Wolfsteller |
issue1345: Added macro for the differing epoch-description, extended query.
|
Thu, 10 Oct 2013 11:19:30 +0200 |
Felix Wolfsteller |
issue1345: Minor refactoring, made structure for epoch loads equal year loads.
|
Thu, 10 Oct 2013 11:10:50 +0200 |
Felix Wolfsteller |
issue1345: Show fraction and year for sediment load dc subtree.
|
Thu, 10 Oct 2013 09:49:01 +0200 |
Felix Wolfsteller |
Revert 7273, add undefined macro to meta-data.xml.
|
Wed, 09 Oct 2013 17:56:39 +0200 |
Tom Gottfried |
Remove annotations from reference curve recommendations. There is no km-axis.
|
Wed, 09 Oct 2013 16:33:56 +0200 |
Sascha L. Teichmann |
DC: Remove accidentaly used user-macro from system-content part.
|
Wed, 09 Oct 2013 16:20:33 +0200 |
Sascha L. Teichmann |
Removed calls to undefined macro.
|
Wed, 09 Oct 2013 16:19:13 +0200 |
Sascha L. Teichmann |
Removed duplicate macro.
|
Wed, 09 Oct 2013 16:17:22 +0200 |
Sascha L. Teichmann |
Added check for duplicate macros.
|
Wed, 09 Oct 2013 13:05:37 +0200 |
Sascha L. Teichmann |
Little workaround not to crash uf there is no theme style. TODO: Figure out why the theme style is null at this point.
|
Wed, 09 Oct 2013 12:46:40 +0200 |
Tom Gottfried |
fixed typo.
|
Wed, 09 Oct 2013 12:15:09 +0200 |
Sascha L. Teichmann |
Vollmer curve: Added facet for generating error report.
|
Wed, 09 Oct 2013 11:20:06 +0200 |
Felix Wolfsteller |
meta-data.xml: Add more entries to discharge datacage ('user-part').
|
Wed, 09 Oct 2013 10:03:00 +0200 |
Felix Wolfsteller |
meta-data.xml: Let DC show (yet all) computed discharge curves as former calculations.
|
Wed, 09 Oct 2013 10:01:00 +0200 |
Felix Wolfsteller |
meta-data.xml: Refactored discharge-curve-prototype.
|
Wed, 09 Oct 2013 09:57:49 +0200 |
Felix Wolfsteller |
meta-data.xml: Add a macro to load previous discharge calculations.
|
Tue, 08 Oct 2013 15:24:33 +0200 |
Felix Wolfsteller |
BedHeightsArtifact: Import 'river' data, for use in "New Chart"-settings.
|
Tue, 08 Oct 2013 15:23:51 +0200 |
Felix Wolfsteller |
RangeAccess: Use min/max as from/to in RangeAccess.
|
Tue, 08 Oct 2013 14:50:58 +0200 |
Felix Wolfsteller |
Refactoring: Let RiverAccess.getRiver return an River.
|
Tue, 08 Oct 2013 12:07:18 +0200 |
Felix Wolfsteller |
issue1490: Fix text annotations of latest points.
|
Tue, 08 Oct 2013 11:49:28 +0200 |
Felix Wolfsteller |
issue1490: Translate other points as well, when at gauge.
|
Tue, 08 Oct 2013 09:26:09 +0200 |
Felix Wolfsteller |
issue1490: Translate text annotations position when displaying w/q- curve at gauge.
|
Tue, 08 Oct 2013 09:00:45 +0200 |
Felix Wolfsteller |
Minor code simplification.
|
Mon, 07 Oct 2013 11:13:40 +0200 |
Sascha L. Teichmann |
ETL: Added repair XSLT script to rename value of GEWAESSER attribute 'Untere Havel-Wasserstraße (UHW)' with 'Havel'.
|
Sun, 06 Oct 2013 15:15:45 +0200 |
Sascha L. Teichmann |
First draft of a german reference document for datacage elements and functions written in reStructuredText. Lots of TODOs.
|
Sat, 05 Oct 2013 17:52:16 +0200 |
Sascha L. Teichmann |
Reduce usage of careless 'for (int i = 0; i < x.size(); i++)' pattern.
|
Sat, 05 Oct 2013 12:49:53 +0200 |
Sascha L. Teichmann |
Repaced some tabs by spaces.
|
Sat, 05 Oct 2013 12:48:44 +0200 |
Sascha L. Teichmann |
Replaced some tabs by spaces. Guys, please configure your editors not to insert tabs!
|
Sat, 05 Oct 2013 12:19:54 +0200 |
Sascha L. Teichmann |
Removed trailing whitespace.
|
Sat, 05 Oct 2013 12:17:23 +0200 |
Sascha L. Teichmann |
Removed trailing whitespace.
|
Sat, 05 Oct 2013 12:16:02 +0200 |
Sascha L. Teichmann |
Remove obsolete same package import.
|
Sat, 05 Oct 2013 12:13:14 +0200 |
Sascha L. Teichmann |
Removed trailing whitespace.
|
Sat, 05 Oct 2013 12:06:25 +0200 |
Sascha L. Teichmann |
Remove obsolete import.
|
Fri, 04 Oct 2013 18:35:05 +0200 |
Andre Heinecke |
Check for inverted setting later.
|
Fri, 04 Oct 2013 18:33:44 +0200 |
Sascha L. Teichmann |
Code simplification + moved code out of inner loop.
|
Fri, 04 Oct 2013 18:21:25 +0200 |
Andre Heinecke |
Remove boundToOut facet pass. This is now only done if we filtered before.
|
Fri, 04 Oct 2013 18:00:29 +0200 |
Andre Heinecke |
Fix SQOverview the new generators need the master artifact set.
|
Fri, 04 Oct 2013 17:56:02 +0200 |
Andre Heinecke |
Polish labels and remove unused classes. SQOverview is currently broken.
|
Fri, 04 Oct 2013 17:02:01 +0200 |
Andre Heinecke |
Add new option to diagram axes "logarithmic" that can be set to an evaluator
|
Fri, 04 Oct 2013 17:00:05 +0200 |
Andre Heinecke |
Add SQRelation Processor
|
Fri, 04 Oct 2013 16:59:30 +0200 |
Andre Heinecke |
Configure SQ Relations to use new diagram way
|
Wed, 02 Oct 2013 18:27:14 +0200 |
Andre Heinecke |
Remove SQ Generator Subclasses for A-F
|
Wed, 02 Oct 2013 18:26:22 +0200 |
Andre Heinecke |
Remove obsolete classes
|
Wed, 02 Oct 2013 17:04:23 +0200 |
Andre Heinecke |
(issue1474) Add datacage loading for SQ Relations
|
Tue, 01 Oct 2013 17:10:55 +0200 |
Andre Heinecke |
Silence overly spammy debug output
|
Fri, 04 Oct 2013 12:16:37 +0200 |
Felix Wolfsteller |
Removed TODO which was already done.
|
Fri, 04 Oct 2013 11:59:26 +0200 |
Felix Wolfsteller |
issue1345: call longitudinal-section-prototype macro for flow-veloc. DC. Added todo.
|
Fri, 04 Oct 2013 11:37:50 +0200 |
Felix Wolfsteller |
issue 1345: Let sediment-load dc-config call longitdunal-section-prototype macro.
|
Fri, 04 Oct 2013 11:11:48 +0200 |
Felix Wolfsteller |
issue1345: Also let bed-quality use longitudinal-section-prototype.
|
Fri, 04 Oct 2013 10:52:07 +0200 |
Felix Wolfsteller |
issue1345: adjust dc-conf for befheight-diffs: is now longitudinal-section-prototype.
|
Fri, 04 Oct 2013 07:49:21 +0200 |
Felix Wolfsteller |
issue1345: meta-data.xml: For bedheight_middle, use the longitudinal-section-prototype.
|
Wed, 02 Oct 2013 23:11:59 +0200 |
Sascha L. Teichmann |
Global facet filtering with bound to out: The DiagramAttributes implements the FacetFilter and not the Generators.
|
Wed, 02 Oct 2013 19:24:43 +0200 |
Sascha L. Teichmann |
Use diagram configuration and there processors to define compatible facets in loaded data.
|
Wed, 02 Oct 2013 18:41:12 +0200 |
Sascha L. Teichmann |
Made lookup for generators a class of its own. First step to use it as a compat filter for facets, too.
|
Wed, 02 Oct 2013 14:14:09 +0200 |
Felix Wolfsteller |
meta-meta.xml: remove debugging info content.
|
Wed, 02 Oct 2013 14:13:19 +0200 |
Felix Wolfsteller |
issue1345: add flowvelocity-macro to winfo longitudinal-section.
|
Wed, 02 Oct 2013 11:44:23 +0200 |
Felix Wolfsteller |
issue1435: DC layout for sediment-loads more the way its requested.
|
Tue, 01 Oct 2013 18:46:30 +0200 |
Tom Gottfried |
WST-parser: making ranges tightly fit was broken since a<b was enforced. Re-enabled.
double-precision
|
Tue, 01 Oct 2013 18:32:01 +0200 |
Tom Gottfried |
Range importer: Do not allow to set invalid a or b.
double-precision
|
Tue, 01 Oct 2013 10:06:11 +0200 |
Felix Wolfsteller |
issue1435: For Sediment Density Facets, use densities name/description.
|
Tue, 01 Oct 2013 10:03:20 +0200 |
Felix Wolfsteller |
issue1435: SedimentDensityFactory: Changed variable name of query to reflect
|
Tue, 01 Oct 2013 10:01:00 +0200 |
Felix Wolfsteller |
issue1435: Add bedheights and morph. width to LS DC conf.
|
Tue, 01 Oct 2013 09:50:53 +0200 |
Andre Heinecke |
(issue1353) Document station check and warn message
|
Tue, 01 Oct 2013 05:58:47 +0200 |
Sascha L. Teichmann |
Bring themes back into sync.
|
Mon, 30 Sep 2013 17:41:15 +0200 |
Felix Wolfsteller |
Doc.
|
Mon, 30 Sep 2013 17:40:42 +0200 |
Felix Wolfsteller |
Initial commit of sediment density processor.
|
Mon, 30 Sep 2013 17:40:04 +0200 |
Felix Wolfsteller |
FlowVelocityGenerator: Simplify code a bit, master and its river is
|
Mon, 30 Sep 2013 17:38:11 +0200 |
Felix Wolfsteller |
SedimentDensityFactory: query densities by id only (not year).
|
Mon, 30 Sep 2013 17:36:44 +0200 |
Felix Wolfsteller |
issue1435: Add sedimentyield and sedimentdensity artifact factories to conf.xml.
|
Mon, 30 Sep 2013 17:35:43 +0200 |
Felix Wolfsteller |
i18n for densities.
|
Mon, 30 Sep 2013 17:33:29 +0200 |
Felix Wolfsteller |
issue1435: Call densities-macro of meta-data.xml thus show densities in datacage.
|
Mon, 30 Sep 2013 17:32:47 +0200 |
Felix Wolfsteller |
issue1435: Add densities-macro to meta-data.xml .
|
Mon, 30 Sep 2013 17:32:04 +0200 |
Felix Wolfsteller |
issue1435: Add SedimentDensityProcessor to longitudinal-diagram-defaults.xml to
|
Mon, 30 Sep 2013 17:31:10 +0200 |
Felix Wolfsteller |
issue1435: SedimentDensityFacet: Access sediment density data.
|
Mon, 30 Sep 2013 17:30:48 +0200 |
Felix Wolfsteller |
Cleaned imports.
|
Mon, 30 Sep 2013 17:30:31 +0200 |
Felix Wolfsteller |
issue1435: Store id of sediment yield only.
|
Mon, 30 Sep 2013 17:30:06 +0200 |
Felix Wolfsteller |
Cleaned imports.
|
Mon, 30 Sep 2013 17:29:47 +0200 |
Felix Wolfsteller |
Cleaned imports, added todo about naming.
|
Mon, 30 Sep 2013 17:29:26 +0200 |
Felix Wolfsteller |
issue1435: Added new sediment.density facet type.
|
Mon, 30 Sep 2013 17:28:58 +0200 |
Felix Wolfsteller |
issue1435: Add methods to get data in StyledSeriesBuilder-friendly format, doc.
|
Mon, 30 Sep 2013 09:38:09 +0200 |
Felix Wolfsteller |
issue1435: Stubs for SedimentDensityFacet and -Artifact.
|
Mon, 30 Sep 2013 09:08:50 +0200 |
Felix Wolfsteller |
issue1435: Prepare SedimentDensityFactory to delive data by sedimentdesity.id and .year.
|
Mon, 30 Sep 2013 07:40:19 +0200 |
Felix Wolfsteller |
Doc fix.
|
Mon, 30 Sep 2013 06:58:09 +0200 |
Felix Wolfsteller |
SedimentYieldArtifact: Removed unneeded documentation, removed but added one TODO.
|
Fri, 27 Sep 2013 22:09:12 +0200 |
Felix Wolfsteller |
issue1435: Remove hardcoded river for dc sediment yield sql query.
|
Fri, 27 Sep 2013 17:45:18 +0200 |
Tom Gottfried |
Remove method which was accidentally merged back from default.
double-precision
|
Fri, 27 Sep 2013 17:36:50 +0200 |
Tom Gottfried |
Merged changes from default into double-precision branch.
double-precision
|
Fri, 27 Sep 2013 16:17:03 +0200 |
Felix Wolfsteller |
Added accidentally omitted i18n.
|
Fri, 27 Sep 2013 16:13:54 +0200 |
Felix Wolfsteller |
issue1435: In DC conf, show sedimentyields in yield/[year|epoch]- structure, i18n.
|
Fri, 27 Sep 2013 14:42:03 +0200 |
Felix Wolfsteller |
issue1435: meta-data.xml: Add sedimentload/yield- part to minfo part of dc.
|
Fri, 27 Sep 2013 14:40:39 +0200 |
Felix Wolfsteller |
SedimentLoadProcessor: Add debug output when handling an out.
|
Fri, 27 Sep 2013 14:39:46 +0200 |
Felix Wolfsteller |
Doc.
|
Fri, 27 Sep 2013 14:39:07 +0200 |
Felix Wolfsteller |
StaticState: doc.
|
Fri, 27 Sep 2013 14:37:28 +0200 |
Felix Wolfsteller |
issue1435: SedimentYieldArtifact: Add functionality.
|
Fri, 27 Sep 2013 14:36:05 +0200 |
Felix Wolfsteller |
SedimentLoadFactory: Added method to quickly get the description of a given load.
|
Fri, 27 Sep 2013 14:35:42 +0200 |
Felix Wolfsteller |
SedimentLoadFactory: Fix query, added comment about correctness of
|
Fri, 27 Sep 2013 12:11:54 +0200 |
Sascha L. Teichmann |
flys/issue1500: The main wst file determines km_up now.
|
Thu, 26 Sep 2013 22:03:27 +0200 |
Felix Wolfsteller |
Initial commit for untested standalone sediment yield artifact.
|
Thu, 26 Sep 2013 21:44:53 +0200 |
Felix Wolfsteller |
issue1435: Add method to SedimentLoadFactory to fetch a SedimentLoad by id.
|
Thu, 26 Sep 2013 21:30:19 +0200 |
Felix Wolfsteller |
issue1435: Minor refactoring that will come handy to load SedimentLoads
|
Thu, 26 Sep 2013 19:55:49 +0200 |
Andre Heinecke |
Added tag 3.0.16 for changeset 12248d9eb326
|
Thu, 26 Sep 2013 19:15:17 +0200 |
Andre Heinecke |
Only filter the facets for unbound outs
3.0.16
|
Thu, 26 Sep 2013 19:14:37 +0200 |
Andre Heinecke |
Fix wrong usage of a_id and add more datacage stuff to WSPL longitundinal
|
Thu, 26 Sep 2013 19:13:42 +0200 |
Andre Heinecke |
Fix Y-Axis order for default longituidnals
|
Thu, 26 Sep 2013 19:02:36 +0200 |
Andre Heinecke |
Save target_out in the recommendation to ensure it is sent to the server
|
Thu, 26 Sep 2013 17:31:25 +0200 |
Tom Gottfried |
Filter waterleveldifferences according to unit.
|
Thu, 26 Sep 2013 16:18:55 +0200 |
Tom Gottfried |
Filter prefix of descriptions of MINFO-WSTs.
|
Thu, 26 Sep 2013 16:17:36 +0200 |
Tom Gottfried |
Move MINFO-fixation-stuff to MINFO-datacage and give specified names.
|
Thu, 26 Sep 2013 13:56:54 +0200 |
Felix Wolfsteller |
issue1435: Group minfo-stuff in dc, include waterlevels from csv.
|
Thu, 26 Sep 2013 13:02:02 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
Thu, 26 Sep 2013 12:56:30 +0200 |
Andre Heinecke |
Factor out longitudinal section default config and put it in its own file
|
Thu, 26 Sep 2013 12:22:22 +0200 |
Andre Heinecke |
Saveguard range access in case an artifact has no range
|
Thu, 26 Sep 2013 12:22:01 +0200 |
Andre Heinecke |
Add debug output triggered by debugging the last commit
|
Thu, 26 Sep 2013 12:21:34 +0200 |
Andre Heinecke |
TRUE != FALSE ;)
|
Thu, 26 Sep 2013 12:21:11 +0200 |
Andre Heinecke |
Add ShearStress Processor
|
Thu, 26 Sep 2013 10:39:38 +0200 |
Andre Heinecke |
Cosmetics
|
Thu, 26 Sep 2013 10:39:01 +0200 |
Andre Heinecke |
Handle flow velocity discharge in the new part of the QOutProcessor
|
Thu, 26 Sep 2013 10:38:21 +0200 |
Andre Heinecke |
Handle flow velocity measurements in the FlowVelocity processor
|
Thu, 26 Sep 2013 10:37:24 +0200 |
Andre Heinecke |
Handle flow velocity annotation in annoation processor
|
Thu, 26 Sep 2013 12:56:37 +0200 |
Sascha L. Teichmann |
Diagram attributes: Use evaluators for title arguments, too. This makes it more consistent, powerful and a little bit faster.
|
Thu, 26 Sep 2013 11:41:02 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
Thu, 26 Sep 2013 09:59:23 +0200 |
Andre Heinecke |
Use LongitudinalSectionGenerator2 in the LS diagrams.
|
Thu, 26 Sep 2013 09:58:06 +0200 |
Andre Heinecke |
Add startkm and endkm setting to longitudinal section generator 2
|
Wed, 25 Sep 2013 18:04:49 +0200 |
Andre Heinecke |
Add NPE guard to XYStyle.
|
Wed, 25 Sep 2013 18:04:14 +0200 |
Andre Heinecke |
Add FlowVelocity Processor
|
Wed, 25 Sep 2013 18:03:34 +0200 |
Andre Heinecke |
Configure SedimentLoad to use the new diagram Generator
|
Wed, 25 Sep 2013 17:40:43 +0200 |
Andre Heinecke |
Add SedimentLoadProcessor
|
Thu, 26 Sep 2013 08:38:12 +0200 |
Felix Wolfsteller |
Noted insights.
|
Wed, 25 Sep 2013 16:28:23 +0200 |
Felix Wolfsteller |
issue1493: Also transform NaN X values to empty string.
|
Wed, 25 Sep 2013 16:01:50 +0200 |
Andre Heinecke |
Configure BedQuality to use new DiagramGenerator
|
Wed, 25 Sep 2013 16:01:22 +0200 |
Andre Heinecke |
Remove obsolete classes
|
Wed, 25 Sep 2013 15:57:50 +0200 |
Andre Heinecke |
Add BedQuality Processors
|
Wed, 25 Sep 2013 15:08:48 +0200 |
Andre Heinecke |
Configure bed_difference_year in the new way
|
Wed, 25 Sep 2013 15:08:18 +0200 |
Andre Heinecke |
Add label for bed difference axis
|
Wed, 25 Sep 2013 15:07:41 +0200 |
Andre Heinecke |
Add BedWidthProcessor to handle width facets
|
Wed, 25 Sep 2013 13:09:45 +0200 |
Andre Heinecke |
Rename BedWidthProcessor to BedHeightSounding processor.
|
Wed, 25 Sep 2013 12:36:19 +0200 |
Sascha L. Teichmann |
Diagrams: Determine if axis should be inverted dynamically.
|
Wed, 25 Sep 2013 12:33:22 +0200 |
Andre Heinecke |
Configure BedDiffYear diagram and remove old generator
|
Wed, 25 Sep 2013 12:23:41 +0200 |
Felix Wolfsteller |
Doc.
|
Wed, 25 Sep 2013 12:22:46 +0200 |
Felix Wolfsteller |
issue971: Include encoding parameter hardwiredly in csv export panels
|
Wed, 25 Sep 2013 12:21:45 +0200 |
Felix Wolfsteller |
issue971: Let ExportServiceImpl handle encoding parameter,
|
Wed, 25 Sep 2013 12:20:49 +0200 |
Felix Wolfsteller |
issue971: For diagram csv export request windows-1252 encoded output.
|
Wed, 25 Sep 2013 12:20:01 +0200 |
Felix Wolfsteller |
issue971: Prepare client to include encoding in download url.
|
Wed, 25 Sep 2013 11:48:54 +0200 |
Felix Wolfsteller |
issue971: Let ChartOutputServiceImpl interprete an "encoding" parameter.
|
Wed, 25 Sep 2013 11:48:10 +0200 |
Felix Wolfsteller |
Doc.
|
Mon, 23 Sep 2013 11:40:11 +0200 |
Felix Wolfsteller |
Full stop at doc sentence end.
|
Wed, 25 Sep 2013 11:57:38 +0200 |
Andre Heinecke |
Fix diagram title
|
Wed, 25 Sep 2013 11:57:08 +0200 |
Andre Heinecke |
Remove obsolete MiddleBedHeightGenerator classes
|
Wed, 25 Sep 2013 11:53:45 +0200 |
Andre Heinecke |
Configure MiddleBedHeight diagram
|
Wed, 25 Sep 2013 11:52:05 +0200 |
Andre Heinecke |
Remove wrong docstring
|
Wed, 25 Sep 2013 11:51:47 +0200 |
Andre Heinecke |
Also handle bed height annotations
|
Wed, 25 Sep 2013 11:51:22 +0200 |
Andre Heinecke |
Rename BedheightProcessor to BedWidthProcessor
|
Wed, 25 Sep 2013 11:47:45 +0200 |
Andre Heinecke |
Add axis label to bedheight processor.
|
Wed, 25 Sep 2013 10:25:10 +0200 |
Andre Heinecke |
Add MiddleBedHeightProcessor
|
Wed, 25 Sep 2013 10:01:38 +0200 |
Andre Heinecke |
Add dW handling also to the other new longitudinal section diagrams
|
Tue, 24 Sep 2013 18:37:41 +0200 |
Andre Heinecke |
Configure Longitudinal section diagram to use the new way.
|
Tue, 24 Sep 2013 18:36:43 +0200 |
Andre Heinecke |
Add currentKM context / request mapping to RiverUtils and use it in DiagramGenerator
|
Tue, 24 Sep 2013 18:35:21 +0200 |
Andre Heinecke |
Handle multiple processors for axis labeling.
|
Tue, 24 Sep 2013 18:33:30 +0200 |
Andre Heinecke |
Cosmetics
|
Tue, 24 Sep 2013 18:32:55 +0200 |
Andre Heinecke |
Add DeltaWProcessor to process data for a delta W axis.
|
Tue, 24 Sep 2013 18:13:51 +0200 |
Andre Heinecke |
Fix area label rendering.
|
Tue, 24 Sep 2013 16:23:18 +0200 |
Sascha L. Teichmann |
Removed obsolete imports. Minor code cosmetics.
|
Tue, 24 Sep 2013 12:32:08 +0200 |
Andre Heinecke |
Close generator-refactoring
generator-refactoring
|
Tue, 24 Sep 2013 12:29:44 +0200 |
Andre Heinecke |
Merge branch generator-refectoring into default.
|
Tue, 24 Sep 2013 12:25:36 +0200 |
Andre Heinecke |
Migrate w_differences and remove unused classes
generator-refactoring
|
Tue, 24 Sep 2013 11:43:21 +0200 |
Andre Heinecke |
Actually commit the canHandle part of the last revision. (WQCKms in WOut proc.)
generator-refactoring
|
Tue, 24 Sep 2013 11:42:04 +0200 |
Andre Heinecke |
Process corrected WQkms (WQCKms) also in the WOutProcessor
generator-refactoring
|
Tue, 24 Sep 2013 11:40:43 +0200 |
Andre Heinecke |
Fix applying the inversion of diagrams.
generator-refactoring
|
Tue, 24 Sep 2013 11:38:07 +0200 |
Andre Heinecke |
Migrate discharge_longitudinal_section generator to the new architecture.
generator-refactoring
|
Tue, 24 Sep 2013 11:30:06 +0200 |
Andre Heinecke |
Reactivate CALCULATION_DISCHARGE_LONGITUDINAL_CURVE
generator-refactoring
|
Tue, 24 Sep 2013 11:29:18 +0200 |
Andre Heinecke |
Also handle subtypes of Discharge longitundial Q facets.
generator-refactoring
|
Tue, 24 Sep 2013 11:28:29 +0200 |
Andre Heinecke |
Default to the label of longitundial Q axis in the QProcessor
generator-refactoring
|
Tue, 24 Sep 2013 11:27:28 +0200 |
Andre Heinecke |
Handle axis include zero setting for the new processing architecture
generator-refactoring
|
Tue, 24 Sep 2013 11:26:45 +0200 |
Andre Heinecke |
Minor cleanup / doc
generator-refactoring
|
Mon, 23 Sep 2013 16:41:12 +0200 |
Andre Heinecke |
Add refactored LongitudinalSectionGenerator2 that inherits DiagramGenerator
generator-refactoring
|
Mon, 23 Sep 2013 16:00:02 +0200 |
Andre Heinecke |
Add more Inversion logic to the DiagramGenerator
generator-refactoring
|
Mon, 23 Sep 2013 15:55:09 +0200 |
Andre Heinecke |
Add AxisLabel handling to WDiffProcessor
generator-refactoring
|
Mon, 23 Sep 2013 15:46:05 +0200 |
Andre Heinecke |
Add WDiffProcessor
generator-refactoring
|
Mon, 23 Sep 2013 15:30:46 +0200 |
Andre Heinecke |
Add AreaProcessor
generator-refactoring
|
Mon, 23 Sep 2013 16:08:04 +0200 |
Sascha L. Teichmann |
Added diagram attributes as converter to longitudinal section diagrams.
generator-refactoring
|
Mon, 23 Sep 2013 12:28:22 +0200 |
Sascha L. Teichmann |
Use pre-converted diagram attributes now.
generator-refactoring
|
Mon, 23 Sep 2013 12:21:59 +0200 |
Andre Heinecke |
Fix domain axis label and add manualpoints processor to config
generator-refactoring
|
Mon, 23 Sep 2013 12:21:08 +0200 |
Andre Heinecke |
Move manual point handling into a Processor
generator-refactoring
|
Mon, 23 Sep 2013 12:20:27 +0200 |
Andre Heinecke |
Add useful debug output for diagram generator debugging
generator-refactoring
|
Mon, 23 Sep 2013 11:37:13 +0200 |
Felix Wolfsteller |
issue1493: Don't let NaNs slip through csv export.
|
Mon, 23 Sep 2013 11:24:17 +0200 |
Felix Wolfsteller |
Minor refactoring for 1493.
|
Mon, 23 Sep 2013 10:24:47 +0200 |
Andre Heinecke |
Add DiagramGenerator doOut function
generator-refactoring
|
Mon, 23 Sep 2013 10:23:21 +0200 |
Andre Heinecke |
Add DiagramGenerator doOut function
generator-refactoring
|
Mon, 23 Sep 2013 10:22:52 +0200 |
Andre Heinecke |
Simplify code to prepare DiagramGenerator signature
generator-refactoring
|
Mon, 23 Sep 2013 10:21:59 +0200 |
Andre Heinecke |
Add more proessors to longitudinal diagram
generator-refactoring
|
Mon, 23 Sep 2013 09:25:04 +0200 |
Andre Heinecke |
Remove accidental commited debug line
generator-refactoring
|
Sun, 22 Sep 2013 21:29:35 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
generator-refactoring
|
Sun, 22 Sep 2013 21:05:12 +0200 |
Sascha L. Teichmann |
Use Object instead of DOM Element as argument for setup of out generators. First step to remove dependency to XML DOM when using configuration.
generator-refactoring
|
Sun, 22 Sep 2013 17:15:15 +0200 |
Sascha L. Teichmann |
Little workaround to make diagram attribute parsing more thread safe. This is not the right solution.
generator-refactoring
|
Sun, 22 Sep 2013 17:07:17 +0200 |
Sascha L. Teichmann |
Moved generators to separate xml file.
generator-refactoring
|
Fri, 20 Sep 2013 19:18:04 +0200 |
Andre Heinecke |
Implement Label handling
generator-refactoring
|
Fri, 20 Sep 2013 19:17:49 +0200 |
Andre Heinecke |
Add info generator for refactored generators
generator-refactoring
|
Fri, 20 Sep 2013 17:58:30 +0200 |
Andre Heinecke |
Remove generator2 hacks
generator-refactoring
|
Fri, 20 Sep 2013 17:36:11 +0200 |
Andre Heinecke |
Simplyfy / unify "invert axis" logic
generator-refactoring
|
Fri, 20 Sep 2013 17:04:37 +0200 |
Sascha L. Teichmann |
Removed faked ChartInfoGenerator2 and LS Info generator.
generator-refactoring
|
Fri, 20 Sep 2013 17:00:59 +0200 |
Sascha L. Teichmann |
ChartGenerator2 can be used as ChartInfoGenerator, too.
generator-refactoring
|
Fri, 20 Sep 2013 16:34:37 +0200 |
Sascha L. Teichmann |
Merged
generator-refactoring
|
Fri, 20 Sep 2013 16:34:09 +0200 |
Sascha L. Teichmann |
Extended init() of OutGenerator to take name of the out to serve.
generator-refactoring
|
Fri, 20 Sep 2013 16:33:22 +0200 |
Andre Heinecke |
Add LTR inversion code to diagram generator.
generator-refactoring
|
Fri, 20 Sep 2013 16:25:43 +0200 |
Andre Heinecke |
More Processor refactoring
generator-refactoring
|
Fri, 20 Sep 2013 15:44:39 +0200 |
Sascha L. Teichmann |
Trim "names" and "class" attribute of out generators before using.
generator-refactoring
|
Fri, 20 Sep 2013 15:42:21 +0200 |
Sascha L. Teichmann |
Allow comma separated names in "names" attribute in out generators to allow registering for more than one name. Old "name" attribute is removed.
generator-refactoring
|
Fri, 20 Sep 2013 15:29:02 +0200 |
Sascha L. Teichmann |
Read out generator class info from "class" attribute instead of tags text body.
generator-refactoring
|
Fri, 20 Sep 2013 14:59:00 +0200 |
Andre Heinecke |
Use DiagramGenerator for longitudinal section.
generator-refactoring
|
Fri, 20 Sep 2013 14:57:26 +0200 |
Andre Heinecke |
Add NPE guard
generator-refactoring
|
Fri, 20 Sep 2013 14:56:46 +0200 |
Andre Heinecke |
Add InfoGenerator Hacks to be removed soon.
generator-refactoring
|
Fri, 20 Sep 2013 14:55:44 +0200 |
Andre Heinecke |
Remove Axis Walker, unabstract Diagram generator
generator-refactoring
|
Fri, 20 Sep 2013 14:54:26 +0200 |
Andre Heinecke |
Add second doOut implementations to work with diagram generator
generator-refactoring
|
Fri, 20 Sep 2013 14:22:44 +0200 |
Felix Wolfsteller |
issue1494: Spawn Q facet only if Q data is there.
|
Thu, 19 Sep 2013 12:53:11 +0200 |
Felix Wolfsteller |
Simplify code a bit.
|
Thu, 19 Sep 2013 12:52:06 +0200 |
Felix Wolfsteller |
Doc, comment.
|
Fri, 20 Sep 2013 13:11:22 +0200 |
Tom Gottfried |
Close branch longitudinal-symmetry. Diagram refactoring is now done in branch generator-refactoring.
longitudinal-symmetry
|
Fri, 20 Sep 2013 12:35:14 +0200 |
Sascha L. Teichmann |
Added 'include-zero' attribute to <axis> tag in diagram configuration.
generator-refactoring
|
Fri, 20 Sep 2013 12:28:15 +0200 |
Sascha L. Teichmann |
Added domain axis title to diagram attributes.
generator-refactoring
|
Fri, 20 Sep 2013 12:04:14 +0200 |
Andre Heinecke |
Some more accessors and typo fix
generator-refactoring
|
Fri, 20 Sep 2013 10:30:03 +0200 |
Andre Heinecke |
Remove AxisProcessor "glue" class and extend Processor interface
generator-refactoring
|
Fri, 20 Sep 2013 10:29:14 +0200 |
Andre Heinecke |
Fix indention / line length
generator-refactoring
|
Fri, 20 Sep 2013 09:55:17 +0200 |
Andre Heinecke |
Add Default Processor implementation and make processors inherit it.
generator-refactoring
|
Thu, 19 Sep 2013 17:08:02 +0200 |
Tom Gottfried |
Remove obsolete configuration of DGM-SRID.
|
Thu, 19 Sep 2013 16:27:33 +0200 |
Sascha L. Teichmann |
DGM SRIds are now fetched from database instead of configuration.
|
Thu, 19 Sep 2013 12:51:30 +0200 |
Felix Wolfsteller |
issue1436: Repair sedimentload epoch calculation,
|
Thu, 19 Sep 2013 10:39:15 +0200 |
Felix Wolfsteller |
Corrected debug output.
|
Thu, 19 Sep 2013 11:50:36 +0200 |
Sascha L. Teichmann |
Call processors from configuration.
generator-refactoring
|
Thu, 19 Sep 2013 11:39:00 +0200 |
Sascha L. Teichmann |
Parse config when setup a new diagram.
generator-refactoring
|
Thu, 19 Sep 2013 11:29:35 +0200 |
Andre Heinecke |
Add annotationProcessor
generator-refactoring
|
Thu, 19 Sep 2013 11:08:43 +0200 |
Sascha L. Teichmann |
Added alignment rules for diagrams.
generator-refactoring
|
Thu, 19 Sep 2013 10:57:47 +0200 |
Sascha L. Teichmann |
Simple interpolation logic for diagram titles and subtitles.
generator-refactoring
|
Thu, 19 Sep 2013 09:16:52 +0200 |
Felix Wolfsteller |
issue1493: Use other numberformat for csv data from diagram.
|
Wed, 18 Sep 2013 18:40:52 +0200 |
Felix Wolfsteller |
issue971: Bring a formatter in (a bad) place.
|
Wed, 18 Sep 2013 14:15:14 +0200 |
Felix Wolfsteller |
issue971: Use ";" as CSV separator also in ChartExportHelper, with the
|
Wed, 18 Sep 2013 17:13:17 +0200 |
Andre Heinecke |
Add DiagramGenerator which should mainly replace xygenerator
generator-refactoring
|
Wed, 18 Sep 2013 17:12:13 +0200 |
Andre Heinecke |
Factor out annotation handling code
generator-refactoring
|
Wed, 18 Sep 2013 16:26:12 +0200 |
Sascha L. Teichmann |
Fixed typo.
generator-refactoring
|
Wed, 18 Sep 2013 16:21:07 +0200 |
Andre Heinecke |
Correct group for jfreechart
generator-refactoring
|
Wed, 18 Sep 2013 16:20:59 +0200 |
Sascha L. Teichmann |
Added first version of diagram attribute parser.
generator-refactoring
|
Wed, 18 Sep 2013 16:05:56 +0200 |
Andre Heinecke |
Update jfreechart dependency to 1.0.15
generator-refactoring
|
Wed, 18 Sep 2013 15:44:49 +0200 |
Andre Heinecke |
Use combine instead of combineignoringNaN (for compatibility)
generator-refactoring
|
Wed, 18 Sep 2013 15:04:26 +0200 |
Sascha L. Teichmann |
Add setup(Element config) method to Generator interface to be initialized from configuration.
generator-refactoring
|
Wed, 18 Sep 2013 12:25:05 +0200 |
Felix Wolfsteller |
issue971: Change CSV column separator to ";".
|
Wed, 18 Sep 2013 12:24:33 +0200 |
Felix Wolfsteller |
issue971: Change CSV column separator to ";" for Exports, client-side change follows.
|
Wed, 18 Sep 2013 10:12:47 +0200 |
Andre Heinecke |
Combine AxisDataset implementations and remove / simplify handling code.
generator-refactoring
|
Tue, 17 Sep 2013 16:49:37 +0200 |
Andre Heinecke |
Add a copy of the ChartGenerator class.
generator-refactoring
|
Tue, 17 Sep 2013 15:34:28 +0200 |
Andre Heinecke |
(issue1023) We do not support html getfeatureinfo
|
Tue, 17 Sep 2013 11:45:44 +0200 |
Felix Wolfsteller |
Doc.
|
Tue, 17 Sep 2013 09:43:27 +0200 |
Felix Wolfsteller |
WDifferencesState: Remove empty constructor.
|
Tue, 17 Sep 2013 09:31:33 +0200 |
Felix Wolfsteller |
issue1470: Make validate of WDifferencesState return true if in "new chart".
|
Mon, 16 Sep 2013 17:30:14 +0200 |
Felix Wolfsteller |
Doc.
|
Mon, 16 Sep 2013 17:29:16 +0200 |
Felix Wolfsteller |
Doc.
|
Mon, 16 Sep 2013 17:28:34 +0200 |
Felix Wolfsteller |
Cosmetics, typo fix in comment.
|
Mon, 16 Sep 2013 17:26:16 +0200 |
Felix Wolfsteller |
Cosmetics.
|
Mon, 16 Sep 2013 17:11:16 +0200 |
Andre Heinecke |
Added tag 3.0.15 for changeset a18a43764793
|
Mon, 16 Sep 2013 16:18:01 +0200 |
Felix Wolfsteller |
issue1235: Do not add 'other' values twice to suspended sed. values, fix range.
3.0.15
|
Mon, 16 Sep 2013 15:11:02 +0200 |
Felix Wolfsteller |
Doc.
|
Mon, 16 Sep 2013 15:45:51 +0200 |
Andre Heinecke |
Fix syntax error on oracle by removing unused paramater
|
Mon, 16 Sep 2013 15:30:06 +0200 |
Andre Heinecke |
(issue1071) Change format for paramter a again
|
Mon, 16 Sep 2013 12:51:22 +0200 |
Andre Heinecke |
(Issue 1353): Add warning when a gauge is skipped because of station
|
Mon, 16 Sep 2013 09:52:28 +0200 |
Felix Wolfsteller |
issue1465: Assume that a "0" measurement for total sediment load is
|
Mon, 16 Sep 2013 09:17:33 +0200 |
Felix Wolfsteller |
issue1157: Fix sorting by start time (descending) for cross-section selection.
|
Fri, 13 Sep 2013 18:29:01 +0200 |
Tom Gottfried |
Schema change: increase precision of gauges.station to be able to hold nearby gauges.
double-precision
|
Fri, 13 Sep 2013 17:42:09 +0200 |
Sascha L. Teichmann |
Fixed misuse of x !=/== Double.NaN
|
Fri, 13 Sep 2013 16:10:10 +0200 |
Felix Wolfsteller |
issue1465: Adjust to new use of NaN instead of 0.
|
Fri, 13 Sep 2013 16:07:46 +0200 |
Felix Wolfsteller |
issue1465: Do not allow null ranges for fraction values, logger.error instead.
|
Fri, 13 Sep 2013 16:03:05 +0200 |
Felix Wolfsteller |
issue1465: Initialize sediment load fraction values with NaN instead of 0,
|
Fri, 13 Sep 2013 16:01:11 +0200 |
Felix Wolfsteller |
issue1465: Show space instead of '-' in table results view.
|
Fri, 13 Sep 2013 15:30:17 +0200 |
Sascha L. Teichmann |
Typo fix.
|
Fri, 13 Sep 2013 15:24:07 +0200 |
Sascha L. Teichmann |
Another tweak for flys/issue1353: Be more tolerant about river names.
|
Fri, 13 Sep 2013 12:28:13 +0200 |
Tom Gottfried |
make_release.sh: default DGM_PATH to path on poland.
|
Fri, 13 Sep 2013 12:30:42 +0200 |
Felix Wolfsteller |
issue1465: Prepare SedimentLoadExporter to show "-" for NaN-values.
|
Fri, 13 Sep 2013 12:02:40 +0200 |
Sascha L. Teichmann |
Fix for flys/issue1479: Really iterate over the FLYS river not over empty list.
|
Thu, 12 Sep 2013 21:12:59 +0200 |
Tom Gottfried |
SCHEMA CHANGE: a < b now enforced on ranges.
double-precision
|
Thu, 12 Sep 2013 19:15:07 +0200 |
Tom Gottfried |
DGM-importer: enforce a < b for ranges.
double-precision
|
Thu, 12 Sep 2013 18:58:19 +0200 |
Tom Gottfried |
Range import: enforce a<b not only for WSTs and set only a for zero-length ranges.
double-precision
|
Thu, 12 Sep 2013 18:43:21 +0200 |
Tom Gottfried |
Issue1333: expand single-line i.e. 0-lenght Q-range to minimal length.
double-precision
|
Fri, 30 Aug 2013 17:31:20 +0200 |
Tom Gottfried |
Minor schema change: allow to delete ranges with associated DEMs.
double-precision
|
Thu, 12 Sep 2013 18:04:48 +0200 |
Sascha L. Teichmann |
Fix for flys/issue1018: Sort the pairs of (q, w) in q before creating a spline also in case of non interpolation.
|
Thu, 12 Sep 2013 16:35:07 +0200 |
Sascha L. Teichmann |
Fix for flys/issue1479: The indices of the dates of the analysis periods where re-mapped wrong.
|
Thu, 12 Sep 2013 11:50:39 +0200 |
Felix Wolfsteller |
issue1472: Remove commented code.
|
Thu, 12 Sep 2013 11:33:26 +0200 |
Felix Wolfsteller |
issue1472: Do not guess flow direction from differences.
|
Thu, 12 Sep 2013 10:15:18 +0200 |
Tom Gottfried |
LocationDistancePanel error messages: do not imply calculation in the direction of kilometrage.
|
Thu, 12 Sep 2013 10:13:09 +0200 |
Tom Gottfried |
merged accidental head (nothing changed)
|
Thu, 12 Sep 2013 09:46:35 +0200 |
Felix Wolfsteller |
issue1378: Adjust style for flood-protection annotation values at y axis.
|