Mon, 19 Feb 2018 18:04:25 +0100 |
gernotbelger |
Activated theme 'streckeninformation
|
Mon, 19 Feb 2018 18:04:06 +0100 |
gernotbelger |
Using correct layer names
|
Mon, 19 Feb 2018 18:03:52 +0100 |
gernotbelger |
Reactivatd random stuff
|
Thu, 15 Feb 2018 18:40:40 +0100 |
gernotbelger |
SINFO FlowDepth - slight code cleanup
|
Thu, 15 Feb 2018 13:47:19 +0100 |
gernotbelger |
Flow-depth-axis and tkh-axis are now synchronized at 0. Show baseline for charts with tkhAxis
|
Thu, 15 Feb 2018 13:46:35 +0100 |
gernotbelger |
Introduced ChartExtender that allows to tweak the charts for very specific use cases.
|
Wed, 14 Feb 2018 19:06:21 +0100 |
gernotbelger |
Implemented access to bed measurements
|
Wed, 14 Feb 2018 18:45:42 +0100 |
gernotbelger |
Calculating moving average of flow depth output
|
Wed, 14 Feb 2018 18:45:01 +0100 |
gernotbelger |
Allow to configure lower and upper margin of a chart axis
|
Wed, 14 Feb 2018 18:16:03 +0100 |
gernotbelger |
Missed some places were axes were created
|
Wed, 14 Feb 2018 18:15:32 +0100 |
gernotbelger |
Missed some places were axes were created
|
Wed, 14 Feb 2018 18:10:53 +0100 |
gernotbelger |
SINFO-FlowDepth - work on tkh themes
|
Wed, 14 Feb 2018 18:10:28 +0100 |
gernotbelger |
Some minor changes on chart: allow area-themes to consider range; allow for axis-margins
|
Tue, 13 Feb 2018 14:53:23 +0100 |
gernotbelger |
Work on SINFO-FlowDepth
|
Fri, 09 Feb 2018 18:07:22 +0100 |
gernotbelger |
Further work on SINFO-FlowDepth
|
Fri, 09 Feb 2018 16:11:47 +0100 |
gernotbelger |
Further work on SINFO-FlowDepth
|
Fri, 09 Feb 2018 16:11:34 +0100 |
gernotbelger |
Slightly better abstraction for extraction waterlevels via datacage
|
Fri, 09 Feb 2018 15:39:49 +0100 |
Tom Gottfried |
Added tag 3.2.2 for changeset de423c2a3c1b
3.2.x
|
Fri, 09 Feb 2018 13:27:10 +0100 |
gernotbelger |
Further work on SINFO-FlowDepth
|
Fri, 09 Feb 2018 13:20:16 +0100 |
gernotbelger |
Fixed: reverting removal of module-localization because it is also used at a different place
|
Thu, 08 Feb 2018 18:48:24 +0100 |
gernotbelger |
Some work on SINFO FlowDepth
|
Thu, 08 Feb 2018 18:47:36 +0100 |
gernotbelger |
Allow access to staticwqkms data; also allow to acces by km range
|
Thu, 08 Feb 2018 18:46:34 +0100 |
gernotbelger |
Fixed: strange tweak in w-diferences panel always returned staticwkms factory instead of the original one. In sinfo we need the original one though.
|
Wed, 07 Feb 2018 18:04:53 +0100 |
gernotbelger |
Fixed some minro layout problems and initial selection.
|
Wed, 07 Feb 2018 12:11:05 +0100 |
gernotbelger |
Removed obsolete client side module localization
|
Wed, 07 Feb 2018 12:03:21 +0100 |
gernotbelger |
Just c comment describing an existing bug
|
Wed, 07 Feb 2018 12:02:58 +0100 |
gernotbelger |
Introduced groups for modules. Modules marked with the same group-id, will be put together in the ui.
|
Wed, 07 Feb 2018 11:59:13 +0100 |
gernotbelger |
Introduced groups for modules. Modules marked with the same group-id, will be put together in the ui.
|
Wed, 07 Feb 2018 11:52:04 +0100 |
gernotbelger |
Fixed some typos
|
Wed, 07 Feb 2018 11:50:26 +0100 |
gernotbelger |
Fixed typo
|
Mon, 22 Jan 2018 17:02:26 +0100 |
Tom Gottfried |
Checkstyle: define header inline.
3.2.x 3.2.2
|
Mon, 22 Jan 2018 16:59:03 +0100 |
Tom Gottfried |
Build script: Do not require branch or tag in all repositories.
3.2.x
|
Mon, 22 Jan 2018 16:38:32 +0100 |
Tom Gottfried |
URL-encode URLs (potentially) containing invalid characters.
3.2.x
|
Fri, 19 Jan 2018 20:30:47 +0100 |
Tom Gottfried |
Encode fixation preview image-URL with GWT-means.
3.2.x
|
Fri, 19 Jan 2018 18:47:53 +0100 |
gernotbelger |
Some work on flow depth exporter
|
Fri, 19 Jan 2018 18:47:18 +0100 |
gernotbelger |
Introduced new number formats for some new data types
|
Fri, 19 Jan 2018 18:46:20 +0100 |
gernotbelger |
Introduced new FLYS constants class that contains the version number
|
Fri, 19 Jan 2018 11:23:42 +0100 |
gernotbelger |
Merge with 0862ea5d66baf60e7eee496d130a35157cc9ec12
|
Thu, 18 Jan 2018 20:54:03 +0100 |
Tom Gottfried |
Add Checkstyle configuration.
3.2.x
|
Thu, 18 Jan 2018 20:52:41 +0100 |
Tom Gottfried |
Fix license headers.
3.2.x
|
Thu, 18 Jan 2018 20:37:25 +0100 |
Tom Gottfried |
Fix diverse coding issues.
3.2.x
|
Thu, 18 Jan 2018 20:12:01 +0100 |
Tom Gottfried |
Fix code style.
3.2.x
|
Thu, 18 Jan 2018 20:10:59 +0100 |
Tom Gottfried |
Remove unused test code.
3.2.x
|
Thu, 18 Jan 2018 18:34:41 +0100 |
gernotbelger |
SINFO - first prototype of BArt Fließtiefen
|
Thu, 18 Jan 2018 18:33:52 +0100 |
gernotbelger |
Some source code comments and fixme's
|
Thu, 18 Jan 2018 18:32:30 +0100 |
gernotbelger |
Refaktored the DatacageTwinPanel so it is reusable.
|
Thu, 18 Jan 2018 18:26:30 +0100 |
gernotbelger |
Generalized the FloodplainChoice to a reusable BooleanChoiceState
|
Thu, 18 Jan 2018 18:22:25 +0100 |
gernotbelger |
Better helper for acessing gauges by station
|
Thu, 18 Jan 2018 18:21:30 +0100 |
gernotbelger |
Using varargs for message arguments
|
Thu, 18 Jan 2018 17:59:39 +0100 |
gernotbelger |
Reverting test commit
|
Thu, 18 Jan 2018 15:42:52 +0100 |
gernotbelger |
Testcommit
|
Tue, 16 Jan 2018 18:39:52 +0100 |
Tom Gottfried |
Remove unused classes.
|
Tue, 16 Jan 2018 18:13:54 +0100 |
Tom Gottfried |
Documenting comment.
|
Fri, 12 Jan 2018 17:07:42 +0100 |
Tom Gottfried |
Encode print URL with GWT-means.
|
Fri, 12 Jan 2018 12:12:27 +0100 |
Tom Gottfried |
Mark constants final.
|
Fri, 12 Jan 2018 12:09:44 +0100 |
Tom Gottfried |
Whitespace cosmetics.
|
Fri, 12 Jan 2018 12:04:05 +0100 |
Tom Gottfried |
Add missing copyright headers.
|
Thu, 29 Jun 2017 18:25:20 +0200 |
Tom Gottfried |
Fix client build.
|
Wed, 28 Jun 2017 20:09:53 +0200 |
Tom Gottfried |
Add configurable time tolerance to SAML ticket validation.
|
Tue, 30 May 2017 12:51:42 +0200 |
Tom Gottfried |
Use the webservers log for MapServer.
|
Wed, 17 May 2017 17:45:56 +0200 |
Tom Gottfried |
ETL: Add shell parameters for config to run script.
|
Wed, 17 May 2017 16:15:41 +0200 |
Tom Gottfried |
Move README to doc as to include it in package.
|
Wed, 17 May 2017 16:11:04 +0200 |
Tom Gottfried |
ETL: use Java 7, include run-script and docs when packaging.
|
Wed, 17 May 2017 15:53:32 +0200 |
Tom Gottfried |
ETL: Update some dependencies.
|
Wed, 17 May 2017 12:44:49 +0200 |
Tom Gottfried |
Remove unused binaries.
|
Wed, 17 May 2017 12:44:13 +0200 |
Tom Gottfried |
Do not ignore JARs generally.
|
Wed, 17 May 2017 12:28:30 +0200 |
Tom Gottfried |
Remove obsolete paragraph in README.
|
Wed, 17 May 2017 12:14:45 +0200 |
Tom Gottfried |
Ignore TAGS file.
|
Tue, 16 May 2017 17:20:53 +0200 |
Tom Gottfried |
Geo-Importer: Install dependencies directly on target system.
|
Tue, 16 May 2017 17:07:20 +0200 |
Tom Gottfried |
Remove outdated script.
|
Tue, 16 May 2017 16:59:59 +0200 |
Tom Gottfried |
Upgrade importer to GDAL 1.11.
|
Tue, 16 May 2017 16:00:55 +0200 |
Tom Gottfried |
Whitespace cleanup.
|
Tue, 16 May 2017 15:59:00 +0200 |
Tom Gottfried |
Remove obsolete details from importer docs.
|
Tue, 16 May 2017 12:56:29 +0200 |
Tom Gottfried |
Fix dependency.
|
Mon, 15 May 2017 18:06:24 +0200 |
Tom Gottfried |
Fix path to python importer.
|
Mon, 15 May 2017 18:05:29 +0200 |
Tom Gottfried |
OpenLayers download moved.
|
Mon, 15 May 2017 16:36:39 +0200 |
Tom Gottfried |
Fix D4E framework API-call.
|
Mon, 15 May 2017 16:23:27 +0200 |
Tom Gottfried |
import_river.sh: log less verbose.
|
Fri, 12 May 2017 19:30:41 +0200 |
Tom Gottfried |
Add missing skip-option in import script.
|
Wed, 10 May 2017 13:28:02 +0200 |
Tom Gottfried |
Include init scripts in release bundle.
|
Wed, 10 May 2017 12:09:14 +0200 |
Tom Gottfried |
Add demodata and fix server startup in DB Dockerfile.
|
Tue, 09 May 2017 18:42:56 +0200 |
Tom Gottfried |
min and max must not be equal in LAYER EXTENT in mapfile.
|
Tue, 09 May 2017 17:58:10 +0200 |
Tom Gottfried |
Avoid some annoying NPEs when developing with sparsely filled database.
|
Tue, 09 May 2017 16:05:42 +0200 |
Tom Gottfried |
Report URL on DB connection failure.
|
Fri, 28 Apr 2017 19:03:56 +0200 |
Tom Gottfried |
Do not filter cross section points for display.
|
Thu, 13 Apr 2017 15:25:26 +0200 |
Tom Gottfried |
Remove unsed debugging code.
|
Tue, 14 Mar 2017 16:36:16 +0100 |
Tom Gottfried |
Importer: rename path to extra wsts to avoid non-ascii.
|
Tue, 14 Mar 2017 16:27:14 +0100 |
Tom Gottfried |
Upgrade to new PostgreSQL JDBC-driver.
|
Mon, 22 Feb 2016 17:26:36 +0100 |
Sascha L. Teichmann |
Merged
|
Mon, 22 Feb 2016 17:26:11 +0100 |
Sascha L. Teichmann |
Use new XMLUtils signature when loading themes.
|
Tue, 16 Feb 2016 14:26:32 +0100 |
Tom Gottfried |
Document singularity of river axes at server start.
|
Wed, 03 Feb 2016 18:35:18 +0100 |
Tom Gottfried |
Do not use configuration EntityResolver here.
|
Mon, 28 Dec 2015 17:54:29 +0100 |
Tom Gottfried |
Added tag 3.2.1 for changeset d8e3b20e2c93
|
Mon, 28 Dec 2015 17:52:31 +0100 |
Tom Gottfried |
Add missing newline at end of file.
3.2.1
|
Thu, 24 Dec 2015 19:05:21 +0100 |
Tom Gottfried |
Entities will be resolved correctly if placeholder is given.
|
Thu, 24 Dec 2015 17:48:42 +0100 |
Tom Gottfried |
Control directory where axis mapfiles are written.
|
Tue, 22 Dec 2015 11:22:06 +0100 |
Tom Gottfried |
(Issue1856) Exclude ACC 3.1, use 3.2.2 instead.
|
Thu, 17 Dec 2015 18:34:28 +0100 |
Tom Gottfried |
Backout revision d793caaf5b5e.
|
Thu, 17 Dec 2015 18:31:26 +0100 |
Tom Gottfried |
CGI needs to be enabled in jessie.
|
Thu, 17 Dec 2015 17:07:53 +0100 |
Tom Gottfried |
Small corrections and cosmetics for install docs.
|
Wed, 16 Dec 2015 17:23:37 +0100 |
Tom Gottfried |
Update install docs.
|
Thu, 10 Dec 2015 18:25:11 +0100 |
Tom Gottfried |
createlang is deprecated and PL/pgSQL installed by default.
|
Thu, 10 Dec 2015 17:41:27 +0100 |
Tom Gottfried |
Add Dockerfile for Postgres-DB setup.
|
Thu, 10 Dec 2015 17:40:02 +0100 |
Tom Gottfried |
Improve Postgres-DB setup.
|
Thu, 10 Dec 2015 14:50:29 +0100 |
Tom Gottfried |
Added tag 3.2.0 for changeset e062d3afd682
|
Thu, 10 Dec 2015 14:41:31 +0100 |
Tom Gottfried |
Add missing newlines at end of file.
3.2.0
|
Thu, 10 Dec 2015 14:40:03 +0100 |
Tom Gottfried |
Remove unused imports.
|
Thu, 10 Dec 2015 14:38:32 +0100 |
Tom Gottfried |
Remove indirections internally.
|
Tue, 08 Dec 2015 20:44:18 +0100 |
Tom Gottfried |
Remove trailing whitespace.
|
Tue, 08 Dec 2015 20:33:07 +0100 |
Tom Gottfried |
Remove trailing whitespace in properties.
|
Tue, 08 Dec 2015 20:15:45 +0100 |
Tom Gottfried |
Issue1854: Avoid assumptions about limits of SQL datetime.
|
Tue, 08 Dec 2015 19:16:03 +0100 |
Tom Gottfried |
Remove unused or redundant imports.
|
Tue, 08 Dec 2015 18:44:41 +0100 |
Tom Gottfried |
It comes already ordered from the database.
|
Tue, 08 Dec 2015 18:10:18 +0100 |
Tom Gottfried |
Issue1854: Use the real data.
|
Tue, 08 Dec 2015 16:43:46 +0100 |
Tom Gottfried |
Add missing whitespace (syntax error).
|
Tue, 08 Dec 2015 16:03:30 +0100 |
Tom Gottfried |
Issue1854: Adapt to QualityMeasurementFactory and filter with river distance.
|
Tue, 08 Dec 2015 15:56:12 +0100 |
Tom Gottfried |
It's worth a warning.
|
Mon, 07 Dec 2015 17:03:34 +0100 |
Tom Gottfried |
Issue1854: Adapt statement to QualityMeasurementFactory
|
Thu, 03 Dec 2015 14:44:35 +0100 |
Tom Gottfried |
Issue1854: Filter BedOverview down to river distance.
|
Thu, 03 Dec 2015 12:20:03 +0100 |
Tom Gottfried |
Tidied.
|
Wed, 02 Dec 2015 20:20:03 +0100 |
Tom Gottfried |
Remove spammy debug line.
|
Wed, 02 Dec 2015 19:35:11 +0100 |
Tom Gottfried |
Tidied.
|
Tue, 24 Nov 2015 18:52:24 +0100 |
Tom Gottfried |
Add script to migrate an Oracle DB from schema 3.1.9 to 3.1.10.
|
Thu, 19 Nov 2015 19:55:12 +0100 |
Tom Gottfried |
Remove invalid public key file.
|
Fri, 28 Aug 2015 16:24:01 +0200 |
Tom Gottfried |
(issue1839) Consider more than one location in ld_locations.
|
Fri, 28 Aug 2015 12:56:53 +0200 |
Tom Gottfried |
Force clean dependency management in backend.
|
Fri, 28 Aug 2015 12:55:01 +0200 |
Tom Gottfried |
Cleanup backend dependencies.
|
Fri, 28 Aug 2015 12:44:23 +0200 |
Tom Gottfried |
Add unstated dependency.
|
Tue, 25 Aug 2015 19:52:33 +0200 |
Tom Gottfried |
Remove unused dependency.
|
Thu, 20 Aug 2015 19:14:56 +0200 |
Andre Heinecke |
issue1841 Only include loads where value != NaN in info service
|
Thu, 20 Aug 2015 14:21:54 +0200 |
Tom Gottfried |
Remove unused method.
|
Thu, 20 Aug 2015 10:56:14 +0200 |
Tom Gottfried |
Language corrections in docs.
|
Mon, 17 Aug 2015 11:06:23 +0200 |
Tom Gottfried |
(issue1838) Remove method in RiverUtils.
|
Mon, 17 Aug 2015 10:18:05 +0200 |
Tom Gottfried |
(issue1838) Get min and max directly from database.
|
Fri, 14 Aug 2015 18:24:04 +0200 |
Tom Gottfried |
Upgrade to DBCP 2.1.1
|
Thu, 13 Aug 2015 18:37:13 +0200 |
Tom Gottfried |
Clean up a few debug messages.
|
Tue, 11 Aug 2015 12:17:42 +0200 |
Sascha L. Teichmann |
Made ETL process more tolerant for dates in SGM/DIPS gauges. Upgrade to ojdbc6.jar.
|
Fri, 26 Jun 2015 19:33:17 +0200 |
Tom Gottfried |
Remove indirection via RiverUtils to obtain reference gauge and reduce casts.
|
Fri, 26 Jun 2015 18:11:27 +0200 |
Tom Gottfried |
(issue1801) Remove indirection via RiverUtils for obtaining reference gauge.
|
Fri, 26 Jun 2015 16:23:32 +0200 |
Tom Gottfried |
A duration curve is always calculated for a single location.
|
Fri, 26 Jun 2015 14:31:08 +0200 |
Tom Gottfried |
Remove further indirection in WINFOArtifact.
|
Wed, 24 Jun 2015 15:49:23 +0200 |
Andre Heinecke |
(issue1801) Code cleanups
|
Wed, 24 Jun 2015 14:07:26 +0200 |
Andre Heinecke |
(issue1801) Unify reference gauge finding code
|
Fri, 19 Jun 2015 17:42:23 +0200 |
Andre Heinecke |
Add quotes in Path tests to avoid wrong results if variables are unset
|
Fri, 19 Jun 2015 17:41:35 +0200 |
Andre Heinecke |
(issue1824) Install smartgwt from file base on SMARTGWT environment variable
|
Fri, 19 Jun 2015 17:23:35 +0200 |
Andre Heinecke |
(issue1824) Use fixed smartgwt version and add rationale for this.
|
Fri, 19 Jun 2015 17:00:32 +0200 |
Andre Heinecke |
Do not die if work dir is clean.
|
Fri, 19 Jun 2015 16:35:13 +0200 |
Andre Heinecke |
(issue1448) Make sq time intervals distinct only for non epoch loads
|
Mon, 08 Jun 2015 17:39:51 +0200 |
Andre Heinecke |
Remove unused variable and microoptimize loop variables.
|
Mon, 08 Jun 2015 16:53:54 +0200 |
Andre Heinecke |
(issue1788) Fix area split if there are no NaN's in the data
|
Fri, 05 Jun 2015 16:56:47 +0200 |
Tom Gottfried |
We expect that every river has only one RiverAxis of kind 1
|
Fri, 05 Jun 2015 16:53:07 +0200 |
Tom Gottfried |
Avoid writing defect mapfiles for layers without extent.
|
Thu, 21 May 2015 16:10:21 +0200 |
Tom Gottfried |
Remove accidentaly commited temporary debug lines.
|
Thu, 21 May 2015 13:46:37 +0200 |
Tom Gottfried |
(issue1550) Fix writing parameter -GEL to parameter file.
|
Fri, 08 May 2015 13:02:33 +0200 |
Tom Gottfried |
Install doc: update to latest changes in binary packages.
|
Thu, 07 May 2015 15:16:44 +0200 |
Tom Gottfried |
Importer-packaging: just a warning would end up with a package that really looks like VERSION.
|
Thu, 07 May 2015 09:52:56 +0200 |
Tom Gottfried |
Added tag 3.1.10 for changeset 1bc1d6969520
|
Thu, 07 May 2015 09:51:38 +0200 |
Tom Gottfried |
Release script: just a warning would end up with a package that really looks like VERSION (e.g. if -t was forgotten).
3.1.10
|
Thu, 07 May 2015 09:26:43 +0200 |
Tom Gottfried |
Release script: use newer patch build of Smart GWT.
|
Wed, 06 May 2015 18:46:57 +0200 |
Tom Gottfried |
(issue1798) Handle the case when there are no data in the diagram.
|
Wed, 06 May 2015 17:59:38 +0200 |
Tom Gottfried |
Facet-Metadata: Don't put the value into the key.
|
Wed, 06 May 2015 16:23:23 +0200 |
Tom Gottfried |
Bedheight differences PDF-export: there might be multiple differences, so place them at the bottom of the title band.
|
Wed, 06 May 2015 13:29:10 +0200 |
Tom Gottfried |
Release script: prevent gunzip from asking for overwrite.
|
Thu, 30 Apr 2015 20:02:30 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
Thu, 30 Apr 2015 19:57:45 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
Thu, 30 Apr 2015 18:13:15 +0200 |
Tom Gottfried |
(issue1754) Handle the case if no radius is given.
|
Thu, 30 Apr 2015 17:11:59 +0200 |
Andre Heinecke |
(issue1754) Remove default subtitle hack
|
Thu, 30 Apr 2015 13:06:51 +0200 |
Andre Heinecke |
(issue1754) Proper subtitle handling for Radius
|
Thu, 30 Apr 2015 13:02:37 +0200 |
Andre Heinecke |
(issue1754) Add subtitle to output for Minfo Diff's and Flow velocity
|
Wed, 29 Apr 2015 18:20:23 +0200 |
Tom Gottfried |
(issue1801) Reference gauge for waterlevel calculation depends on direction of calculation or flow direction.
|
Wed, 29 Apr 2015 18:17:53 +0200 |
Tom Gottfried |
(issue1801) Return defined gauge at limit between two gauge ranges.
|
Wed, 29 Apr 2015 16:36:29 +0200 |
Tom Gottfried |
Remove misuse of method for determining gauge for a long range.
|
Wed, 29 Apr 2015 14:13:57 +0200 |
Andre Heinecke |
(issue1754) Fix check for empty data bounds
|
Wed, 29 Apr 2015 12:30:57 +0200 |
Tom Gottfried |
(issue1801) Determine gauge at a station always with same tolerance.
|
Wed, 29 Apr 2015 11:56:04 +0200 |
Andre Heinecke |
(issue1754) Fix Radius calculation for filtered (smoothed) facets
|
Tue, 28 Apr 2015 14:22:47 +0200 |
Andre Heinecke |
(issue1754) Do not base smoothing radius on calculation range
|
Mon, 27 Apr 2015 17:35:28 +0200 |
Andre Heinecke |
(issue1754) Do not filter BedHeightSoundings to range.
|
Mon, 27 Apr 2015 15:15:44 +0200 |
Andre Heinecke |
Deduplicate code in Minfo / Wifo difference select states.
|
Mon, 27 Apr 2015 14:50:38 +0200 |
Andre Heinecke |
Deduplicate W / BedHeight Difference selection panel code
|
Mon, 27 Apr 2015 12:48:41 +0200 |
Andre Heinecke |
Backout 8716:b5ac17a10d22 Regression risk too high.
|
Mon, 27 Apr 2015 12:48:24 +0200 |
Andre Heinecke |
Backout 8709:71ae18553377 Regression risk too high.
|
Mon, 27 Apr 2015 11:45:31 +0200 |
Andre Heinecke |
(issue1754) Only create new Recommendations
|
Fri, 24 Apr 2015 18:03:46 +0200 |
Andre Heinecke |
(issue1448) There is no more need for off_epoch infos
|
Fri, 24 Apr 2015 18:01:18 +0200 |
Tom Gottfried |
(issue1602) We don't distinguish between types since sometime but we want to have metadata at the facet.
|
Fri, 24 Apr 2015 17:54:12 +0200 |
Andre Heinecke |
(issue1448) Remove obsolete code for OfficalEpoch "Calculation"
|
Fri, 24 Apr 2015 17:18:48 +0200 |
Andre Heinecke |
(issue1448) Localize SedimentLoadInfo Exceptions shown in the client
|
Fri, 24 Apr 2015 17:17:56 +0200 |
Andre Heinecke |
(issue1448) Also filter epoch values in sq_time_interval mode
|
Fri, 24 Apr 2015 15:57:49 +0200 |
Andre Heinecke |
Improve ArtifactHelper creation debug output
|
Fri, 24 Apr 2015 15:57:23 +0200 |
Andre Heinecke |
(issue1754) Also fixup master artifact for already loaded recommendations
|
Fri, 24 Apr 2015 12:45:55 +0200 |
Andre Heinecke |
Change database connection debug output to traces
|
Wed, 15 Apr 2015 17:22:02 +0200 |
Andre Heinecke |
Change some debugs to trace in theme factory
|
Fri, 24 Apr 2015 15:06:38 +0200 |
Tom Gottfried |
(issue1750) Apply schema changes to oracle, which are already done for PostgreSQL.
|
Thu, 23 Apr 2015 19:20:40 +0200 |
Tom Gottfried |
(issue1787) Globally sorting WST-columns over avg(Q)+max(Q) might give unexpected results at some kms. We thus sort locally since Rev 93a31cfb18c0.
|
Thu, 23 Apr 2015 19:13:33 +0200 |
Tom Gottfried |
(issue1787) Sort WQ data locally over Q bevor lookup of Qs for given W.
|
Thu, 23 Apr 2015 19:06:41 +0200 |
Tom Gottfried |
Avoid NPE: fixRes is null if wqkms.lenght==0.
|
Thu, 23 Apr 2015 16:42:42 +0200 |
Tom Gottfried |
Remove some superfluous debug output and obsolete outcommented code.
|
Wed, 22 Apr 2015 11:32:08 +0200 |
Tom Gottfried |
(issue1602) Use correct descriptor for sounding width y-data.
|
Mon, 20 Apr 2015 17:57:48 +0200 |
Tom Gottfried |
Remove useless line of code (thanks for the hint, SLT).
|
Mon, 20 Apr 2015 15:32:03 +0200 |
Tom Gottfried |
(issue1670) Remove parallel implementation for gaps in line themes.
|
Mon, 20 Apr 2015 15:31:12 +0200 |
Tom Gottfried |
(issue1670) Purge obsolete if-branching.
|
Mon, 20 Apr 2015 15:03:02 +0200 |
Tom Gottfried |
(issue1670) There is no point in refilling half of the gaps.
|
Mon, 20 Apr 2015 12:58:52 +0200 |
Tom Gottfried |
(issue1670) Remove 99-percent copy-paste method, which had been used only once.
|
Mon, 20 Apr 2015 12:50:00 +0200 |
Tom Gottfried |
(issue1670) We want to see gaps larger than 100 m, not 100 km.
|
Mon, 20 Apr 2015 10:23:40 +0200 |
Tom Gottfried |
(issue1750) Use new MeasuremenStation-methods to find companion station and do less checking for inconsistent data (schema or at least importer do the job now).
|
Mon, 20 Apr 2015 10:21:45 +0200 |
Tom Gottfried |
(issue1750) New methods for finding the actual location and companion station of a measurement station.
|
Fri, 17 Apr 2015 15:04:16 +0200 |
Tom Gottfried |
(issue1750) Consistently attach parameters of suspended respectively bedload material to measurement station of respective type.
|
Fri, 17 Apr 2015 14:55:42 +0200 |
Tom Gottfried |
(issue1750) There can be only one SQ-relation of a parameter for a time range (given by sq_relation_id) per station and some other attributes might be null.
|
Fri, 17 Apr 2015 14:50:08 +0200 |
Tom Gottfried |
Handle empty strings as missing values without warning when parsing SQ-relations.
|
Thu, 16 Apr 2015 18:38:19 +0200 |
Tom Gottfried |
(issue1763) Reduce code-duplication (patch by Sascha Teichmann).
|
Wed, 15 Apr 2015 18:36:11 +0200 |
Tom Gottfried |
(issue1763) Empty strings are most likely intended as missing values, so don't try to parse them (plus enhanced logging).
|
Wed, 15 Apr 2015 17:30:27 +0200 |
Tom Gottfried |
(issue1796) We don't necessarily need the river Rhine. SedDB river names are purely optional.
|
Tue, 14 Apr 2015 17:57:09 +0200 |
Tom Gottfried |
(issue1755) Remove redundant conditional checks.
|
Tue, 14 Apr 2015 17:23:15 +0200 |
Tom Gottfried |
(issue1755) The essence is that interpolation is impossible though their might be data.
|
Mon, 13 Apr 2015 11:26:44 +0200 |
Andre Heinecke |
(issue1796) Use seddb name of a river when accessing the seddb
|
Mon, 13 Apr 2015 11:24:32 +0200 |
Andre Heinecke |
(issue 1796) Scheme change! Add model for seddb_name lookup table.
|
Mon, 13 Apr 2015 11:03:00 +0200 |
Andre Heinecke |
issue1755 Prevent out of bounds access when there is no data
|
Fri, 10 Apr 2015 17:47:00 +0200 |
Tom Gottfried |
(issue1763) Fix filtering of lines when parsing bed heights.
|
Fri, 10 Apr 2015 17:42:10 +0200 |
Tom Gottfried |
(issue1763) We have UNIQUE(station, bedHeight) since Rev 2d16f4a0bdcc and comparing with the other parameters will never return any row if any of them is null.
|
Fri, 10 Apr 2015 13:26:59 +0200 |
Tom Gottfried |
Fix spelling and whitespace-cleanup in ETL-README.
|
Fri, 10 Apr 2015 11:17:03 +0200 |
Andre Heinecke |
(issue1755) Add non empty measurement facets again
|
Thu, 09 Apr 2015 19:27:54 +0200 |
Tom Gottfried |
Importer, do not jump knowingly over the cliff.
|
Thu, 09 Apr 2015 18:20:55 +0200 |
Tom Gottfried |
(issue1755) Fix i18n.
|
Thu, 09 Apr 2015 17:29:45 +0200 |
Tom Gottfried |
Mavenize importer packaging and allow packaging for specific versions and database systems.
|
Thu, 09 Apr 2015 17:08:51 +0200 |
Tom Gottfried |
(issue1763) Correct properties in importer scripts.
|
Thu, 09 Apr 2015 11:54:55 +0200 |
Tom Gottfried |
Correct usage section in release script.
|
Thu, 09 Apr 2015 11:13:45 +0200 |
Tom Gottfried |
Remove outdated contributed scripts in backend.
|
Thu, 09 Apr 2015 11:11:12 +0200 |
Tom Gottfried |
Remove outdated or useless README-files in backend.
|
Thu, 09 Apr 2015 10:52:51 +0200 |
Tom Gottfried |
Move importer configuration to a single place.
|
Thu, 09 Apr 2015 10:28:50 +0200 |
Andre Heinecke |
(issue1755) Some spelling fixes for problems in bedquality calc
|
Thu, 09 Apr 2015 10:27:00 +0200 |
Andre Heinecke |
(issue1755) Add Problem also if a result is not interpolateable
|
Wed, 08 Apr 2015 19:09:38 +0200 |
Andre Heinecke |
(issue1755) Only add facets / results when they do not consist exlcusively of NaN values.
|
Wed, 08 Apr 2015 18:15:55 +0200 |
Tom Gottfried |
(issue1763) Use more distinct constraint names and adapt drop-script.
|
Wed, 08 Apr 2015 14:47:30 +0200 |
Tom Gottfried |
Move static measurement types to their natural home.
|
Tue, 07 Apr 2015 16:35:11 +0200 |
Tom Gottfried |
(issue1787) Do not accept any non-NaN W-value but check for epsilon.
|
Tue, 07 Apr 2015 12:10:45 +0200 |
Tom Gottfried |
Sorting rows is a prerequisite.
|
Tue, 07 Apr 2015 11:20:36 +0200 |
Tom Gottfried |
Use EpsilonComparator instead of redundant implementation.
|
Thu, 02 Apr 2015 18:37:26 +0200 |
Andre Heinecke |
(issue1755) Fix typo in theme mapping for porosity sublayer
|
Thu, 02 Apr 2015 18:22:01 +0200 |
Andre Heinecke |
(issue1755) Do not add empty data facets in BedQuality State
|
Thu, 02 Apr 2015 17:40:18 +0200 |
Andre Heinecke |
(issue1803) Use MD5 instead of a homegrown hashing algorithm
|
Thu, 02 Apr 2015 17:17:51 +0200 |
Tom Gottfried |
Whitespace-cleanup schema files.
|
Thu, 02 Apr 2015 15:48:48 +0200 |
Andre Heinecke |
(issue1755) Add problem / report handling to BedQualityCalculation
|
Thu, 02 Apr 2015 14:10:25 +0200 |
Andre Heinecke |
(issue1755) Uppercase diameter names in CSV Header
|
Thu, 02 Apr 2015 14:09:27 +0200 |
Andre Heinecke |
(issue1755) Fix Y Axis label in Bed Quality facets. It's used in the CSV Export.
|
Thu, 02 Apr 2015 14:06:56 +0200 |
Andre Heinecke |
(issue1755) Fix typo that filtered out porosity.sublayer facets
|
Wed, 01 Apr 2015 17:10:03 +0200 |
Andre Heinecke |
(issue1755) Do not create interpolated themes and disable export of non interpolatable data.
|
Wed, 01 Apr 2015 13:11:30 +0200 |
Tom Gottfried |
User smarter new interface from RangeAccess.
|
Tue, 31 Mar 2015 17:28:27 +0200 |
Andre Heinecke |
Improve coding style in KMFilter loops
|
Tue, 31 Mar 2015 17:27:20 +0200 |
Andre Heinecke |
(issue1754) Do not switch W and Km data when Range filtering WKms
|
Tue, 31 Mar 2015 15:16:12 +0200 |
Andre Heinecke |
(issue1754) Increase m index after adding an interpolated result.
|
Mon, 30 Mar 2015 19:29:31 +0200 |
Andre Heinecke |
(issue1754) Handle a>b in static BedHeight facets.
|
Mon, 30 Mar 2015 19:28:41 +0200 |
Andre Heinecke |
(issue1754) Simplify code to handle a>b cases.
|
Mon, 30 Mar 2015 19:27:11 +0200 |
Andre Heinecke |
(issue1754) Extend RangeAccess to simplyfiy range access where it is assumed that from < to
|
Mon, 30 Mar 2015 19:11:35 +0200 |
Andre Heinecke |
Remove obsolete code.
|
Fri, 27 Mar 2015 19:10:02 +0100 |
Andre Heinecke |
Remove JavaScript greeting exception.
|
Fri, 27 Mar 2015 18:59:27 +0100 |
Andre Heinecke |
(issue1754) Handle inverted presentation in BedDifference exporter
|
Fri, 27 Mar 2015 18:54:03 +0100 |
Tom Gottfried |
Enforce strings we rely on.
|