| Thu, 30 Apr 2015 13:02:37 +0200 |
Andre Heinecke |
(issue1754) Add subtitle to output for Minfo Diff's and Flow velocity
|
| Wed, 29 Apr 2015 18:20:23 +0200 |
Tom Gottfried |
(issue1801) Reference gauge for waterlevel calculation depends on direction of calculation or flow direction.
|
| Wed, 29 Apr 2015 18:17:53 +0200 |
Tom Gottfried |
(issue1801) Return defined gauge at limit between two gauge ranges.
|
| Wed, 29 Apr 2015 16:36:29 +0200 |
Tom Gottfried |
Remove misuse of method for determining gauge for a long range.
|
| Wed, 29 Apr 2015 14:13:57 +0200 |
Andre Heinecke |
(issue1754) Fix check for empty data bounds
|
| Wed, 29 Apr 2015 12:30:57 +0200 |
Tom Gottfried |
(issue1801) Determine gauge at a station always with same tolerance.
|
| Wed, 29 Apr 2015 11:56:04 +0200 |
Andre Heinecke |
(issue1754) Fix Radius calculation for filtered (smoothed) facets
|
| Tue, 28 Apr 2015 14:22:47 +0200 |
Andre Heinecke |
(issue1754) Do not base smoothing radius on calculation range
|
| Mon, 27 Apr 2015 17:35:28 +0200 |
Andre Heinecke |
(issue1754) Do not filter BedHeightSoundings to range.
|
| Mon, 27 Apr 2015 15:15:44 +0200 |
Andre Heinecke |
Deduplicate code in Minfo / Wifo difference select states.
|
| Mon, 27 Apr 2015 14:50:38 +0200 |
Andre Heinecke |
Deduplicate W / BedHeight Difference selection panel code
|
| Mon, 27 Apr 2015 12:48:41 +0200 |
Andre Heinecke |
Backout 8716:b5ac17a10d22 Regression risk too high.
|
| Mon, 27 Apr 2015 12:48:24 +0200 |
Andre Heinecke |
Backout 8709:71ae18553377 Regression risk too high.
|
| Mon, 27 Apr 2015 11:45:31 +0200 |
Andre Heinecke |
(issue1754) Only create new Recommendations
|
| Fri, 24 Apr 2015 18:03:46 +0200 |
Andre Heinecke |
(issue1448) There is no more need for off_epoch infos
|
| Fri, 24 Apr 2015 18:01:18 +0200 |
Tom Gottfried |
(issue1602) We don't distinguish between types since sometime but we want to have metadata at the facet.
|
| Fri, 24 Apr 2015 17:54:12 +0200 |
Andre Heinecke |
(issue1448) Remove obsolete code for OfficalEpoch "Calculation"
|
| Fri, 24 Apr 2015 17:18:48 +0200 |
Andre Heinecke |
(issue1448) Localize SedimentLoadInfo Exceptions shown in the client
|
| Fri, 24 Apr 2015 17:17:56 +0200 |
Andre Heinecke |
(issue1448) Also filter epoch values in sq_time_interval mode
|
| Fri, 24 Apr 2015 15:57:49 +0200 |
Andre Heinecke |
Improve ArtifactHelper creation debug output
|
| Fri, 24 Apr 2015 15:57:23 +0200 |
Andre Heinecke |
(issue1754) Also fixup master artifact for already loaded recommendations
|
| Fri, 24 Apr 2015 12:45:55 +0200 |
Andre Heinecke |
Change database connection debug output to traces
|
| Wed, 15 Apr 2015 17:22:02 +0200 |
Andre Heinecke |
Change some debugs to trace in theme factory
|
| Fri, 24 Apr 2015 15:06:38 +0200 |
Tom Gottfried |
(issue1750) Apply schema changes to oracle, which are already done for PostgreSQL.
|
| Thu, 23 Apr 2015 19:20:40 +0200 |
Tom Gottfried |
(issue1787) Globally sorting WST-columns over avg(Q)+max(Q) might give unexpected results at some kms. We thus sort locally since Rev 93a31cfb18c0.
|
| Thu, 23 Apr 2015 19:13:33 +0200 |
Tom Gottfried |
(issue1787) Sort WQ data locally over Q bevor lookup of Qs for given W.
|
| Thu, 23 Apr 2015 19:06:41 +0200 |
Tom Gottfried |
Avoid NPE: fixRes is null if wqkms.lenght==0.
|
| Thu, 23 Apr 2015 16:42:42 +0200 |
Tom Gottfried |
Remove some superfluous debug output and obsolete outcommented code.
|
| Wed, 22 Apr 2015 11:32:08 +0200 |
Tom Gottfried |
(issue1602) Use correct descriptor for sounding width y-data.
|
| Mon, 20 Apr 2015 17:57:48 +0200 |
Tom Gottfried |
Remove useless line of code (thanks for the hint, SLT).
|
| Mon, 20 Apr 2015 15:32:03 +0200 |
Tom Gottfried |
(issue1670) Remove parallel implementation for gaps in line themes.
|
| Mon, 20 Apr 2015 15:31:12 +0200 |
Tom Gottfried |
(issue1670) Purge obsolete if-branching.
|
| Mon, 20 Apr 2015 15:03:02 +0200 |
Tom Gottfried |
(issue1670) There is no point in refilling half of the gaps.
|
| Mon, 20 Apr 2015 12:58:52 +0200 |
Tom Gottfried |
(issue1670) Remove 99-percent copy-paste method, which had been used only once.
|
| Mon, 20 Apr 2015 12:50:00 +0200 |
Tom Gottfried |
(issue1670) We want to see gaps larger than 100 m, not 100 km.
|
| Mon, 20 Apr 2015 10:23:40 +0200 |
Tom Gottfried |
(issue1750) Use new MeasuremenStation-methods to find companion station and do less checking for inconsistent data (schema or at least importer do the job now).
|
| Mon, 20 Apr 2015 10:21:45 +0200 |
Tom Gottfried |
(issue1750) New methods for finding the actual location and companion station of a measurement station.
|
| Fri, 17 Apr 2015 15:04:16 +0200 |
Tom Gottfried |
(issue1750) Consistently attach parameters of suspended respectively bedload material to measurement station of respective type.
|
| Fri, 17 Apr 2015 14:55:42 +0200 |
Tom Gottfried |
(issue1750) There can be only one SQ-relation of a parameter for a time range (given by sq_relation_id) per station and some other attributes might be null.
|
| Fri, 17 Apr 2015 14:50:08 +0200 |
Tom Gottfried |
Handle empty strings as missing values without warning when parsing SQ-relations.
|
| Thu, 16 Apr 2015 18:38:19 +0200 |
Tom Gottfried |
(issue1763) Reduce code-duplication (patch by Sascha Teichmann).
|
| Wed, 15 Apr 2015 18:36:11 +0200 |
Tom Gottfried |
(issue1763) Empty strings are most likely intended as missing values, so don't try to parse them (plus enhanced logging).
|
| Wed, 15 Apr 2015 17:30:27 +0200 |
Tom Gottfried |
(issue1796) We don't necessarily need the river Rhine. SedDB river names are purely optional.
|
| Tue, 14 Apr 2015 17:57:09 +0200 |
Tom Gottfried |
(issue1755) Remove redundant conditional checks.
|
| Tue, 14 Apr 2015 17:23:15 +0200 |
Tom Gottfried |
(issue1755) The essence is that interpolation is impossible though their might be data.
|
| Mon, 13 Apr 2015 11:26:44 +0200 |
Andre Heinecke |
(issue1796) Use seddb name of a river when accessing the seddb
|
| Mon, 13 Apr 2015 11:24:32 +0200 |
Andre Heinecke |
(issue 1796) Scheme change! Add model for seddb_name lookup table.
|
| Mon, 13 Apr 2015 11:03:00 +0200 |
Andre Heinecke |
issue1755 Prevent out of bounds access when there is no data
|
| Fri, 10 Apr 2015 17:47:00 +0200 |
Tom Gottfried |
(issue1763) Fix filtering of lines when parsing bed heights.
|
| Fri, 10 Apr 2015 17:42:10 +0200 |
Tom Gottfried |
(issue1763) We have UNIQUE(station, bedHeight) since Rev 2d16f4a0bdcc and comparing with the other parameters will never return any row if any of them is null.
|
| Fri, 10 Apr 2015 13:26:59 +0200 |
Tom Gottfried |
Fix spelling and whitespace-cleanup in ETL-README.
|
| Fri, 10 Apr 2015 11:17:03 +0200 |
Andre Heinecke |
(issue1755) Add non empty measurement facets again
|
| Thu, 09 Apr 2015 19:27:54 +0200 |
Tom Gottfried |
Importer, do not jump knowingly over the cliff.
|
| Thu, 09 Apr 2015 18:20:55 +0200 |
Tom Gottfried |
(issue1755) Fix i18n.
|
| Thu, 09 Apr 2015 17:29:45 +0200 |
Tom Gottfried |
Mavenize importer packaging and allow packaging for specific versions and database systems.
|
| Thu, 09 Apr 2015 17:08:51 +0200 |
Tom Gottfried |
(issue1763) Correct properties in importer scripts.
|
| Thu, 09 Apr 2015 11:54:55 +0200 |
Tom Gottfried |
Correct usage section in release script.
|
| Thu, 09 Apr 2015 11:13:45 +0200 |
Tom Gottfried |
Remove outdated contributed scripts in backend.
|
| Thu, 09 Apr 2015 11:11:12 +0200 |
Tom Gottfried |
Remove outdated or useless README-files in backend.
|
| Thu, 09 Apr 2015 10:52:51 +0200 |
Tom Gottfried |
Move importer configuration to a single place.
|
| Thu, 09 Apr 2015 10:28:50 +0200 |
Andre Heinecke |
(issue1755) Some spelling fixes for problems in bedquality calc
|
| Thu, 09 Apr 2015 10:27:00 +0200 |
Andre Heinecke |
(issue1755) Add Problem also if a result is not interpolateable
|
| Wed, 08 Apr 2015 19:09:38 +0200 |
Andre Heinecke |
(issue1755) Only add facets / results when they do not consist exlcusively of NaN values.
|
| Wed, 08 Apr 2015 18:15:55 +0200 |
Tom Gottfried |
(issue1763) Use more distinct constraint names and adapt drop-script.
|
| Wed, 08 Apr 2015 14:47:30 +0200 |
Tom Gottfried |
Move static measurement types to their natural home.
|
| Tue, 07 Apr 2015 16:35:11 +0200 |
Tom Gottfried |
(issue1787) Do not accept any non-NaN W-value but check for epsilon.
|
| Tue, 07 Apr 2015 12:10:45 +0200 |
Tom Gottfried |
Sorting rows is a prerequisite.
|
| Tue, 07 Apr 2015 11:20:36 +0200 |
Tom Gottfried |
Use EpsilonComparator instead of redundant implementation.
|
| Thu, 02 Apr 2015 18:37:26 +0200 |
Andre Heinecke |
(issue1755) Fix typo in theme mapping for porosity sublayer
|
| Thu, 02 Apr 2015 18:22:01 +0200 |
Andre Heinecke |
(issue1755) Do not add empty data facets in BedQuality State
|
| Thu, 02 Apr 2015 17:40:18 +0200 |
Andre Heinecke |
(issue1803) Use MD5 instead of a homegrown hashing algorithm
|
| Thu, 02 Apr 2015 17:17:51 +0200 |
Tom Gottfried |
Whitespace-cleanup schema files.
|
| Thu, 02 Apr 2015 15:48:48 +0200 |
Andre Heinecke |
(issue1755) Add problem / report handling to BedQualityCalculation
|
| Thu, 02 Apr 2015 14:10:25 +0200 |
Andre Heinecke |
(issue1755) Uppercase diameter names in CSV Header
|
| Thu, 02 Apr 2015 14:09:27 +0200 |
Andre Heinecke |
(issue1755) Fix Y Axis label in Bed Quality facets. It's used in the CSV Export.
|
| Thu, 02 Apr 2015 14:06:56 +0200 |
Andre Heinecke |
(issue1755) Fix typo that filtered out porosity.sublayer facets
|
| Wed, 01 Apr 2015 17:10:03 +0200 |
Andre Heinecke |
(issue1755) Do not create interpolated themes and disable export of non interpolatable data.
|
| Wed, 01 Apr 2015 13:11:30 +0200 |
Tom Gottfried |
User smarter new interface from RangeAccess.
|
| Tue, 31 Mar 2015 17:28:27 +0200 |
Andre Heinecke |
Improve coding style in KMFilter loops
|
| Tue, 31 Mar 2015 17:27:20 +0200 |
Andre Heinecke |
(issue1754) Do not switch W and Km data when Range filtering WKms
|
| Tue, 31 Mar 2015 15:16:12 +0200 |
Andre Heinecke |
(issue1754) Increase m index after adding an interpolated result.
|
| Mon, 30 Mar 2015 19:29:31 +0200 |
Andre Heinecke |
(issue1754) Handle a>b in static BedHeight facets.
|
| Mon, 30 Mar 2015 19:28:41 +0200 |
Andre Heinecke |
(issue1754) Simplify code to handle a>b cases.
|
| Mon, 30 Mar 2015 19:27:11 +0200 |
Andre Heinecke |
(issue1754) Extend RangeAccess to simplyfiy range access where it is assumed that from < to
|
| Mon, 30 Mar 2015 19:11:35 +0200 |
Andre Heinecke |
Remove obsolete code.
|
| Fri, 27 Mar 2015 19:10:02 +0100 |
Andre Heinecke |
Remove JavaScript greeting exception.
|
| Fri, 27 Mar 2015 18:59:27 +0100 |
Andre Heinecke |
(issue1754) Handle inverted presentation in BedDifference exporter
|
| Fri, 27 Mar 2015 18:54:03 +0100 |
Tom Gottfried |
Enforce strings we rely on.
|
| Fri, 27 Mar 2015 17:42:27 +0100 |
Tom Gottfried |
SCHEMA CHANGE: Remove unnecessary direct relation of sq_relation with rivers.
|
| Fri, 27 Mar 2015 17:27:08 +0100 |
Andre Heinecke |
(issue1755) Do not print empty rows for empty results in bedquality export
|
| Fri, 27 Mar 2015 17:26:34 +0100 |
Andre Heinecke |
(issue1755) Fix check for valid date range.
|
| Fri, 27 Mar 2015 17:25:30 +0100 |
Andre Heinecke |
(issue1755) Do not treat empty values as part of the result
|
| Fri, 27 Mar 2015 16:55:58 +0100 |
Andre Heinecke |
(issue1755) Validate selected periods and ranges.
|
| Fri, 27 Mar 2015 16:54:56 +0100 |
Andre Heinecke |
(issue1755) Extend validation to allow localized error messages.
|
| Fri, 27 Mar 2015 14:39:01 +0100 |
Andre Heinecke |
Do not show lines if showlines is not set.
|
| Fri, 27 Mar 2015 13:40:25 +0100 |
Andre Heinecke |
(issue1753) Fix theme for SQ Outliers and SQ Measurements
|
| Thu, 26 Mar 2015 18:21:18 +0100 |
Andre Heinecke |
(issue1754) Unify PDF and CSV export and invert presentation if start > end
|
| Thu, 26 Mar 2015 17:33:55 +0100 |
Andre Heinecke |
(issue1608) Determine field type with the first non empty element
|
| Thu, 26 Mar 2015 17:11:36 +0100 |
Tom Gottfried |
SQ relation CSV export: order info lines according to columns plus whitespace cosmetics.
|
| Thu, 26 Mar 2015 12:11:49 +0100 |
Andre Heinecke |
(issue1753) Fix number format for S
|
| Thu, 26 Mar 2015 12:07:43 +0100 |
Andre Heinecke |
Handle the case where the period panel is used in a state without start and end
|
| Thu, 26 Mar 2015 12:06:47 +0100 |
Andre Heinecke |
(issue1753) Fix CSV metadata explanation fields for Mesurement data
|
| Thu, 26 Mar 2015 11:53:41 +0100 |
Andre Heinecke |
Add default value handling in MultiPeriodPanel
|
| Thu, 26 Mar 2015 11:52:05 +0100 |
Andre Heinecke |
Cleanups
|
| Thu, 26 Mar 2015 11:51:47 +0100 |
Andre Heinecke |
Add default value to BedQuality period selection
|
| Thu, 26 Mar 2015 11:46:03 +0100 |
Andre Heinecke |
Fix unit displayed in WFree calculation
|
| Thu, 26 Mar 2015 11:06:48 +0100 |
Andre Heinecke |
Actually check if there are no items instead of no data.
|
| Thu, 26 Mar 2015 11:06:13 +0100 |
Andre Heinecke |
Handle surprising filter behaivor of *Overviews. Don't create items for unavailable data.
|
| Wed, 25 Mar 2015 19:37:44 +0100 |
Andre Heinecke |
Fix handling of multiple entries in SQPeriodSelect default start/end calculation
|
| Wed, 25 Mar 2015 19:20:13 +0100 |
Andre Heinecke |
Send default values for SQ Period selection to the client.
|
| Wed, 25 Mar 2015 19:18:43 +0100 |
Andre Heinecke |
Try to find "default" data items for start and end in period panel
|
| Wed, 25 Mar 2015 18:23:22 +0100 |
Andre Heinecke |
Remove another obsolete check for an unused (and removed) config value
|
| Wed, 25 Mar 2015 18:22:34 +0100 |
Andre Heinecke |
Remove duplicated code.
|
| Wed, 25 Mar 2015 18:12:16 +0100 |
Andre Heinecke |
Clean up bad code from 8614:e7a2234e7c3f
|
| Wed, 25 Mar 2015 11:41:36 +0100 |
Andre Heinecke |
(issue1755) Clarify how default mecahnism works and remove unused config value.
|
| Wed, 25 Mar 2015 11:25:28 +0100 |
Andre Heinecke |
(issue1608) Export appropiate data for different result types
|
| Tue, 24 Mar 2015 18:17:23 +0100 |
Andre Heinecke |
(issue1755) Add good defaults for bedquality distance selection
|
| Tue, 24 Mar 2015 15:22:16 +0100 |
Andre Heinecke |
(issue869) Add spacer for multiline items
|
| Tue, 24 Mar 2015 11:57:23 +0100 |
Andre Heinecke |
(issue1799) Strip whitespace from river names
|
| Tue, 24 Mar 2015 11:08:39 +0100 |
Andre Heinecke |
(issue1754) Allow ranges where start > end also for beddifferences.
|
| Tue, 24 Mar 2015 11:06:47 +0100 |
Andre Heinecke |
(issue1754) Better fix for radius calculation then 8607:2010da0904b7
|
| Tue, 24 Mar 2015 10:52:23 +0100 |
Andre Heinecke |
(issue1754) Check if start > end and handle this
|
| Tue, 24 Mar 2015 10:50:46 +0100 |
Andre Heinecke |
(issue1754) Fix radius caluculation inf CurveFilter if Start > End
|
| Fri, 20 Mar 2015 18:58:38 +0100 |
Andre Heinecke |
(issue1753) Align data columns to the right side.
|
| Fri, 20 Mar 2015 18:42:00 +0100 |
Andre Heinecke |
(issue1750) Fix id handling with oracle
|
| Fri, 20 Mar 2015 17:31:06 +0100 |
Andre Heinecke |
(issue1750) Check for stations according to measurement station range logic
|
| Fri, 20 Mar 2015 16:36:37 +0100 |
Andre Heinecke |
(issue1753) Increase widht of PARAMETER column
|
| Fri, 20 Mar 2015 16:32:44 +0100 |
Andre Heinecke |
(issue1753) Use epsilon comparator to compare range km's
|
| Fri, 20 Mar 2015 15:20:32 +0100 |
Andre Heinecke |
Lowercase additional call to createPropertyUi
|
| Fri, 20 Mar 2015 15:04:25 +0100 |
Andre Heinecke |
(issue1753) Fix editing the point color (not Color) of SQThemes.
|
| Fri, 20 Mar 2015 14:31:14 +0100 |
Andre Heinecke |
(issue1051) Show offending value in year format error
|
| Thu, 19 Mar 2015 16:50:24 +0100 |
Andre Heinecke |
(issue1051) Fix recommended official epochs for period mode
|
| Thu, 19 Mar 2015 16:28:40 +0100 |
Andre Heinecke |
(issue1051) Validate epochs before adding them to the list
|
| Thu, 19 Mar 2015 15:15:55 +0100 |
Andre Heinecke |
(issue1755) Filter out NaN values before creating the interplation function
|
| Thu, 19 Mar 2015 14:21:39 +0100 |
Andre Heinecke |
(issue1755) Fix export order of multiple result columns
|
| Thu, 19 Mar 2015 14:03:47 +0100 |
Andre Heinecke |
(issue1755) Fix filtering of BedQuality user facets
|
| Thu, 19 Mar 2015 13:49:13 +0100 |
Andre Heinecke |
Don't warn for defined behavior.
|
| Thu, 19 Mar 2015 13:36:38 +0100 |
Andre Heinecke |
(issue1755) Add interpolated facets and update themes accordingly
|
| Thu, 19 Mar 2015 10:38:12 +0100 |
Andre Heinecke |
Don't die if only one year is selected for SedimentLoad calculation
|
| Wed, 18 Mar 2015 18:59:17 +0100 |
Andre Heinecke |
Remove obsolete class
|
| Wed, 18 Mar 2015 18:48:26 +0100 |
Andre Heinecke |
Remove additionally uneccessary file.
|
| Wed, 18 Mar 2015 18:47:07 +0100 |
Andre Heinecke |
Remove unecessary imports
|
| Wed, 18 Mar 2015 18:42:08 +0100 |
Andre Heinecke |
(issue1755) Generalise BedQuality result handling
|
| Tue, 17 Mar 2015 18:52:00 +0100 |
Andre Heinecke |
(issue1599) Fix ManualPoints axis for bedheight_middle outputs.
|
| Tue, 17 Mar 2015 16:37:17 +0100 |
Andre Heinecke |
Reduce duplicated functions to obtain layer descritpions for bedquality
|
| Mon, 16 Mar 2015 17:38:08 +0100 |
Andre Heinecke |
(issue1754) Add range to W / Bed difference export.
|
| Mon, 16 Mar 2015 17:08:04 +0100 |
Andre Heinecke |
Add jasper -> jrxml converted files.
|
| Mon, 16 Mar 2015 16:59:37 +0100 |
Tom Gottfried |
Update SQL-statements to schema-changes in rev 6d8d7425a6b5.
|
| Mon, 16 Mar 2015 15:36:38 +0100 |
Andre Heinecke |
(issue1755) Interpolate BedQuality Results
|
| Mon, 16 Mar 2015 14:37:30 +0100 |
Andre Heinecke |
(issue1753) Format S with only up to three fractional digits
|
| Mon, 16 Mar 2015 14:32:45 +0100 |
Andre Heinecke |
(issue1753) Add english measurements jasper template
|
| Mon, 16 Mar 2015 11:35:19 +0100 |
Andre Heinecke |
(issue1753) Implement PDF export of SQ Measurement data.
|
| Mon, 16 Mar 2015 10:00:39 +0100 |
Andre Heinecke |
(issue1753) Use different theme for measurements overview and single diagrams
|
| Wed, 11 Mar 2015 17:44:27 +0100 |
Andre Heinecke |
Renable access to seddb sessions
|
| Tue, 10 Mar 2015 17:01:42 +0100 |
Andre Heinecke |
Merge of MINFO improvement developments
|
| Fri, 06 Mar 2015 12:26:12 +0100 |
Tom Gottfried |
There seems to be no use case for not overriding these methods.
|
| Fri, 06 Mar 2015 11:21:36 +0100 |
Tom Gottfried |
The bug that motivated this extremely defensive error-handling was fixed in Rev fe7e9da6312a by nomore calling close() on a private variable.
|
| Fri, 06 Mar 2015 10:57:56 +0100 |
Tom Gottfried |
Remove superfluous private variable.
|
| Fri, 27 Feb 2015 19:07:25 +0100 |
Andre Heinecke |
(issue1798) Adjust WinCM according to W in NHN axis on explicit zoom
|
| Thu, 26 Feb 2015 15:53:28 +0100 |
Andre Heinecke |
Do not get any wst values just to get the name of the differences for export.
|
| Thu, 26 Feb 2015 15:52:04 +0100 |
Andre Heinecke |
Readd StaticWQKmsCacheKey and use it again.
|
| Thu, 26 Feb 2015 15:37:03 +0100 |
Tom Gottfried |
Use updated class name instead of no more existant.
|
| Tue, 24 Feb 2015 18:32:18 +0100 |
Andre Heinecke |
(issue1797) Increase session debug output
|
| Tue, 24 Feb 2015 17:16:14 +0100 |
Andre Heinecke |
(issue1797) Move close into session release and guard it.
|
| Tue, 17 Feb 2015 13:58:23 +0100 |
Andre Heinecke |
Replace offensive comment by a more constructive note.
|
| Mon, 16 Feb 2015 18:03:09 +0100 |
Andre Heinecke |
(Issue1755) Add distance step selection to bed quality artifact
|
| Mon, 16 Feb 2015 17:09:14 +0100 |
Andre Heinecke |
Move static operation out of loop.
|
| Mon, 16 Feb 2015 15:58:52 +0100 |
Andre Heinecke |
(issue1755) Move KM Step handling from Winfo artifact to RangeAccess
|
| Mon, 16 Feb 2015 12:12:12 +0100 |
Tom Gottfried |
Accept more elevation system names (e.g. with hyphen).
|
| Mon, 16 Feb 2015 11:48:05 +0100 |
Tom Gottfried |
Meta-data on sounding width associated to bed heights is redundant to real data associated to values.
|
| Mon, 16 Feb 2015 11:08:33 +0100 |
Tom Gottfried |
Bed heights are just bed heights since a while ('single' is obsolete).
|
| Mon, 16 Feb 2015 10:12:12 +0100 |
Tom Gottfried |
Remove obsolete class hierarchy for bed height data.
|
| Mon, 16 Feb 2015 09:50:39 +0100 |
Tom Gottfried |
Abstract parser for bed heights is obsolete.
|
| Mon, 16 Feb 2015 09:35:06 +0100 |
Tom Gottfried |
Importer: Remove obsolete interface for bed heights.
|
| Mon, 16 Feb 2015 09:21:49 +0100 |
Tom Gottfried |
Remove obsolete interface for bed height values.
|
| Mon, 16 Feb 2015 09:00:08 +0100 |
Tom Gottfried |
Morphological width imported and stored with heights is redundant to table morphologic_width.
|
| Mon, 16 Feb 2015 08:39:06 +0100 |
Tom Gottfried |
bed height differences datacage: only supply differences where subtrahend is older than minuend or year is unknown.
|
| Mon, 16 Feb 2015 15:31:17 +0100 |
Andre Heinecke |
(issue1754) Add km filtering for winfo anf fixanal results in difference calculations
|
| Mon, 16 Feb 2015 15:30:22 +0100 |
Andre Heinecke |
Actually configure a bedheight cache.
|
| Mon, 16 Feb 2015 15:28:51 +0100 |
Andre Heinecke |
(issue1754) Fix wst static cache name.
|
| Mon, 16 Feb 2015 15:28:22 +0100 |
Andre Heinecke |
(issue1754) Extend WKms interface for KM filtering
|
| Mon, 16 Feb 2015 15:27:39 +0100 |
Andre Heinecke |
(issue1754) Gracefully handle empty differenc results (e.g from km 0,001 to 0,002)
|
| Mon, 16 Feb 2015 12:55:38 +0100 |
Andre Heinecke |
(issue1754) Add distantce handling to WINFO differences state
|
| Mon, 16 Feb 2015 11:30:27 +0100 |
Andre Heinecke |
Warn for not implemented difference handling of minfo artifacts.
|
| Fri, 13 Feb 2015 16:36:52 +0100 |
Andre Heinecke |
(issue1750) It is an error if there are more then two stations at the same range.
|
| Fri, 13 Feb 2015 16:17:46 +0100 |
Andre Heinecke |
(Issue1754) Make BedDifference calculation range dependent.
|
| Fri, 13 Feb 2015 14:59:16 +0100 |
Andre Heinecke |
(issue1750) Take Static SQ Relations based on a range and merge them together
|
| Fri, 13 Feb 2015 13:44:52 +0100 |
Andre Heinecke |
(issue1753) Remove "measured" from CSV header
|
| Fri, 13 Feb 2015 12:35:18 +0100 |
Andre Heinecke |
(issue1753) Add measurements to CSV export
|
| Fri, 13 Feb 2015 12:34:38 +0100 |
Andre Heinecke |
(issue1753) Add SQ Measurement dates as text annotations to points
|
| Fri, 13 Feb 2015 12:34:06 +0100 |
Andre Heinecke |
(issue1753) Carry measurement date through SQ values
|
| Fri, 13 Feb 2015 12:31:59 +0100 |
Andre Heinecke |
(issue1753) Add label theme for SQMeasurements
|
| Fri, 13 Feb 2015 11:10:19 +0100 |
Andre Heinecke |
Log the server startup to stdout
|
| Thu, 12 Feb 2015 17:29:33 +0100 |
Andre Heinecke |
(issue1599) Add manualpoints theme for MSH
|
| Thu, 12 Feb 2015 12:18:47 +0100 |
Andre Heinecke |
(issue1068) Add different theme for SQOutlier curves and increase SQCurve linesize to 2
|
| Thu, 12 Feb 2015 11:40:08 +0100 |
Andre Heinecke |
(issue1786) Enable manualline facets for cross section charts
|
| Thu, 12 Feb 2015 11:17:46 +0100 |
Andre Heinecke |
(issue869) Remove horizontal lines in parameters
|
| Wed, 11 Feb 2015 18:00:48 +0100 |
Andre Heinecke |
(issue1051) Use a list of single years in SedimentLoadYear mode
|
| Wed, 11 Feb 2015 12:41:51 +0100 |
Andre Heinecke |
(issue1051) Add input support for epochs
|
| Wed, 18 Feb 2015 17:17:20 +0100 |
Andre Heinecke |
(issue1788) Do not divide area by two.
|
| Wed, 18 Feb 2015 16:57:58 +0100 |
Tom Gottfried |
(issue1717) Use unified description for y-field in editor for manual points in historical discharge time-diagrams.
|
| Tue, 17 Feb 2015 16:17:31 +0100 |
Andre Heinecke |
(issue1795) Handle modules configuration for any module
|
| Tue, 17 Feb 2015 12:36:13 +0100 |
Andre Heinecke |
(issue1794) Safeguard against layers without extent.
|
| Fri, 30 Jan 2015 15:21:35 +0100 |
Andre Heinecke |
Update uuid of "Rhein"
|
| Fri, 16 Jan 2015 18:35:35 +0100 |
Andre Heinecke |
(issue1777) Move logging code for existing tickets to the correct location
|
| Mon, 12 Jan 2015 17:57:20 +0100 |
Tom Gottfried |
Remove useless i18n that cannot be called from server anyhow.
|
| Fri, 19 Dec 2014 20:50:29 +0100 |
Tom Gottfried |
Release script: build binaries for publication when tagging and slightly mavenize the whole process.
|
| Fri, 19 Dec 2014 19:32:05 +0100 |
Tom Gottfried |
Useful default for path to DEMs.
|
| Fri, 19 Dec 2014 16:35:06 +0100 |
Tom Gottfried |
It's useful to have an uncompressed tar to which more files can be appended.
|
| Fri, 19 Dec 2014 16:34:12 +0100 |
Tom Gottfried |
We don't need the base directory in the assembly.
|
| Fri, 19 Dec 2014 15:24:43 +0100 |
Tom Gottfried |
Let overview be the first tab in SQ relation output.
|
| Thu, 18 Dec 2014 16:12:01 +0100 |
Tom Gottfried |
On error log error.
|
| Thu, 18 Dec 2014 15:45:17 +0100 |
Tom Gottfried |
Set useful default for mapserver-URLs.
|
| Thu, 18 Dec 2014 11:20:51 +0100 |
Tom Gottfried |
Exclude transitive dependency because of conflicting version which breaks charting.
|
| Wed, 17 Dec 2014 18:02:27 +0100 |
Tom Gottfried |
Update Oracle-POM in backend and add pom-oracle.xml with respective dependency to artifacts.
|
| Wed, 17 Dec 2014 16:16:02 +0100 |
Tom Gottfried |
Configure standalone binary assembly.
|
| Wed, 17 Dec 2014 15:56:41 +0100 |
Tom Gottfried |
Use Maven instead of potentially outdated JARs for creation of h2-databases. TODO: adapt release script.
|
| Wed, 17 Dec 2014 10:50:35 +0100 |
Tom Gottfried |
OpenLayers download moved to github.
|
| Tue, 16 Dec 2014 17:54:55 +0100 |
Tom Gottfried |
Put artifact server run-script in it's final place.
|
| Tue, 16 Dec 2014 17:47:21 +0100 |
Tom Gottfried |
ETL: Upgrade PostgreSQL dependency to same version as river-backend.
|
| Tue, 16 Dec 2014 15:58:33 +0100 |
Andre Heinecke |
(issue1782) Invert artifact range if necessary in officiallinefinder
|
| Tue, 16 Dec 2014 15:40:00 +0100 |
Andre Heinecke |
(issue1782) Invert KM filter if from is larger then to
|
| Tue, 16 Dec 2014 15:29:44 +0100 |
Andre Heinecke |
(issue1782) Select index based on km for step generation
|
| Tue, 16 Dec 2014 14:27:13 +0100 |
Andre Heinecke |
(issue1777) Evaluate CLIENT_CONF environment variable
|
| Tue, 16 Dec 2014 14:16:10 +0100 |
Andre Heinecke |
(issue1777) Add options to change login redirect and disable login
|
| Tue, 16 Dec 2014 12:48:25 +0100 |
Andre Heinecke |
(issue1777) Log saml logins also as info without username.
|
| Tue, 16 Dec 2014 12:47:46 +0100 |
Andre Heinecke |
(issue1777) Hide logout button if it is configured.
|
| Tue, 16 Dec 2014 13:29:38 +0100 |
Tom Gottfried |
Whitespace-cleanup in XML-files.
|
| Mon, 15 Dec 2014 19:30:10 +0100 |
Tom Gottfried |
Release script: remove installation specific defaults and give the possibility to overwrite any config-file in WEB-INF.
|
| Mon, 15 Dec 2014 19:27:04 +0100 |
Tom Gottfried |
The used patch build of SmartGWT is not available anymore.
|
| Mon, 15 Dec 2014 19:25:02 +0100 |
Tom Gottfried |
Release script: use trusted connections to repositories.
|
| Mon, 15 Dec 2014 17:22:16 +0100 |
Tom Gottfried |
Remove obsolete Wiki-URL config in client.
|
| Mon, 15 Dec 2014 16:40:21 +0100 |
Tom Gottfried |
The base-URL comes from elsewhere. Other *.properties-files know that already.
|
| Fri, 12 Dec 2014 11:11:26 +0100 |
Tom Gottfried |
Do not filter tables without end date in recommendations for historical discharge tables.
|
| Thu, 04 Dec 2014 18:15:05 +0100 |
Tom Gottfried |
Artifact-server config in release script: remove installation specific defaults and give the possibility to overwrite any config-file.
|
| Thu, 04 Dec 2014 13:00:23 +0100 |
Tom Gottfried |
Do not give Oracle-JARs with hardcoded personal path in release script.
|
| Thu, 04 Dec 2014 11:38:18 +0100 |
Tom Gottfried |
Correct header for release script.
|
| Tue, 02 Dec 2014 17:58:45 +0100 |
Tom Gottfried |
Added tag 3.1.9 for changeset 7bc675e4e6e0
|
| Tue, 02 Dec 2014 17:54:15 +0100 |
Sascha L. Teichmann |
Remove trailing whitespace.
3.1.9
|
| Tue, 02 Dec 2014 17:51:56 +0100 |
Sascha L. Teichmann |
Removed obsolete imports.
|
| Tue, 02 Dec 2014 15:25:34 +0100 |
Tom Gottfried |
Time series chart: bounds cannot allways be assumed to be given.
|
| Tue, 02 Dec 2014 15:23:01 +0100 |
Tom Gottfried |
Do not flood log with details about all facets.
|
| Tue, 02 Dec 2014 12:59:52 +0100 |
Tom Gottfried |
Datacage config: Oracle has no boolean data type and thus can not handle such CASE-statement in WHERE-clause.
|
| Tue, 02 Dec 2014 12:03:50 +0100 |
Tom Gottfried |
Remove non-existant artifact from config.
|
| Fri, 28 Nov 2014 16:34:40 +0100 |
Tom Gottfried |
Make maxWait configurable and wait for 30 seconds
|
| Fri, 28 Nov 2014 10:21:40 +0100 |
Tom Gottfried |
maxWait should be set independendly of validationQuery.
|
| Thu, 27 Nov 2014 20:25:31 +0100 |
Tom Gottfried |
Use validation queries for release.
|
| Thu, 27 Nov 2014 20:15:38 +0100 |
Tom Gottfried |
Use explicit query to avoid hibernate connection leak.
|
| Thu, 27 Nov 2014 19:55:55 +0100 |
Tom Gottfried |
Connection pool: do not wait forever for new connections and be more verbose.
|
| Thu, 27 Nov 2014 19:14:05 +0100 |
Tom Gottfried |
Upgrade hibernate.
|
| Thu, 27 Nov 2014 19:10:45 +0100 |
Tom Gottfried |
Add missing annotation.
|
| Thu, 27 Nov 2014 17:46:37 +0100 |
Tom Gottfried |
Use RiverAccess instead of RiverUtils.
|
| Thu, 27 Nov 2014 17:09:19 +0100 |
Tom Gottfried |
We depend on PostreSQL >= 9.1 at least since rev 598e4bec920b (because of CTE).
|
| Wed, 26 Nov 2014 14:56:20 +0100 |
Tom Gottfried |
Use portable validation queries.
|
| Wed, 26 Nov 2014 14:40:18 +0100 |
Tom Gottfried |
The used patch build of SmartGWT is not available anymore.
|
| Tue, 25 Nov 2014 14:06:05 +0100 |
Andre Heinecke |
Add validation-query to example configuration.
|
| Thu, 20 Nov 2014 11:27:10 +0100 |
Tom Gottfried |
Datacage: order WSTs according to column numbers in import files.
|
| Tue, 18 Nov 2014 15:24:40 +0100 |
Andre Heinecke |
(issue1772) Use 0.001km tolarance instead of 0.1 to find matching km.
|
| Thu, 13 Nov 2014 13:28:45 +0100 |
Tom Gottfried |
Remove obsolete lines from drop script.
|
| Wed, 12 Nov 2014 13:31:53 +0100 |
Sascha L. Teichmann |
Added a validation SQL query to database backends.
|
| Thu, 06 Nov 2014 15:16:37 +0100 |
Tom Gottfried |
Remove docs for specific system.
|
| Wed, 05 Nov 2014 19:07:49 +0100 |
Tom Gottfried |
Cross section navigation: behave equally, regardless of whether an input value is below or above the range of possible values.
|
| Wed, 05 Nov 2014 15:44:04 +0100 |
Andre Heinecke |
(issue1767) Fix lookup of closest value.
|
| Wed, 05 Nov 2014 13:04:53 +0100 |
Tom Gottfried |
Gauge locations are obsolete since a long time.
|
| Tue, 04 Nov 2014 17:09:04 +0100 |
Andre Heinecke |
(issue1767) Fix closet next value selection.
|
| Tue, 04 Nov 2014 15:32:56 +0100 |
Tom Gottfried |
Add possibility to pack install-script in release tarball.
|
| Thu, 30 Oct 2014 17:49:43 +0100 |
Tom Gottfried |
Remove no more existant processor from config.
|
| Thu, 30 Oct 2014 15:03:55 +0100 |
Tom Gottfried |
Remove obsolete historical discharge curve implementations.
|
| Thu, 30 Oct 2014 14:20:28 +0100 |
Tom Gottfried |
Load discharge curves via recommendations in historical discharge calculation. ToDo: Remove the other logic to load them.
|
| Thu, 30 Oct 2014 14:17:49 +0100 |
Tom Gottfried |
Accept number as argument in dc:date-format().
|
| Thu, 30 Oct 2014 14:10:41 +0100 |
Tom Gottfried |
Unify wording and spelling for axis fixation in chart properties editor.
|
| Thu, 30 Oct 2014 11:03:19 +0100 |
Tom Gottfried |
Remove obsolete setting of start date.
|
| Thu, 30 Oct 2014 10:33:16 +0100 |
Andre Heinecke |
(issue1764) Use datepicker with text field
|
| Wed, 29 Oct 2014 19:52:06 +0100 |
Andre Heinecke |
Improve error handling.
|
| Wed, 29 Oct 2014 19:51:39 +0100 |
Andre Heinecke |
(issue1764) Set upper-time and lower-time for time series axes
|
| Wed, 29 Oct 2014 19:49:18 +0100 |
Andre Heinecke |
(issue1764) Handle date ranges in chart properties editor
|
| Wed, 29 Oct 2014 16:02:37 +0100 |
Tom Gottfried |
Recognize the 'no-data value' of fromkm and tokm in datacage statement for discharge curves.
|
| Tue, 28 Oct 2014 18:52:35 +0100 |
Andre Heinecke |
(issue1732) When duplication wsplgen artificats fix shapefile layers
|
| Tue, 28 Oct 2014 16:10:42 +0100 |
Andre Heinecke |
(issue1733) Use rangeaccess to access range information in location select
|
| Tue, 28 Oct 2014 11:31:33 +0100 |
Tom Gottfried |
The used patch build of SmartGWT is not available anymore. The newer was used for the 3.1.8 release already.
|
| Mon, 27 Oct 2014 17:00:40 +0100 |
Andre Heinecke |
(issue1733) Fix locationdistancepanel
|
| Mon, 27 Oct 2014 12:52:00 +0100 |
Andre Heinecke |
(issue1733) Fix switch between location and distance
|
| Mon, 27 Oct 2014 12:38:22 +0100 |
Andre Heinecke |
(issue1733) Remove weird and broken code (fixes tab selection)
|
| Mon, 27 Oct 2014 12:32:04 +0100 |
Andre Heinecke |
(issue1733) Clearly set location distance defaults
|
| Fri, 24 Oct 2014 16:31:22 +0200 |
Andre Heinecke |
(issue1769) Adapt release script for new print url.
|
| Fri, 24 Oct 2014 11:54:30 +0200 |
Tom Gottfried |
In case to equals from, and only in this case, there should be only one class. Then we have to set an arbitrary value > 0 for step because the user is allowed to give step=0.
|
| Wed, 22 Oct 2014 17:33:43 +0200 |
Andre Heinecke |
(issue1762) Use getValue to obtain dateRange values
|
| Tue, 21 Oct 2014 12:14:39 +0200 |
Tom Gottfried |
Do not transform Q values from cm to m.
|
| Mon, 20 Oct 2014 18:26:15 +0200 |
Tom Gottfried |
Added tag 3.1.8 for changeset 7cb55659646d
|
| Mon, 20 Oct 2014 18:22:07 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
3.1.8
|
| Mon, 20 Oct 2014 18:15:44 +0200 |
Tom Gottfried |
Avoid encoding problem with NaN in bed difference export.
|
| Mon, 20 Oct 2014 16:13:26 +0200 |
Tom Gottfried |
Adapt PDF-export to new columns in bed differences result.
|
| Mon, 20 Oct 2014 14:22:51 +0200 |
Tom Gottfried |
Mention gauge name in theme name for historical discharge curves.
|
| Mon, 20 Oct 2014 13:52:15 +0200 |
Tom Gottfried |
More cleanup in discharge data processing.
|
| Mon, 20 Oct 2014 13:48:51 +0200 |
Tom Gottfried |
Unify descriptions of model discharge curve at gauge.
|
| Mon, 20 Oct 2014 12:23:11 +0200 |
Tom Gottfried |
For fixation analysis, allow loading discharge curves from multiple gauges on calculation range via datacage.
|
| Fri, 17 Oct 2014 19:21:45 +0200 |
Tom Gottfried |
Antiprogramming (in german: 'Softwareabwicklung')
|
| Fri, 17 Oct 2014 19:13:40 +0200 |
Tom Gottfried |
i18n cleanup.
|
| Fri, 17 Oct 2014 18:20:33 +0200 |
Tom Gottfried |
Load sounding width via recommendations for bed height differences and cleanup and fix related bed height macros.
|
| Fri, 17 Oct 2014 17:39:34 +0200 |
Tom Gottfried |
Remove obsolete class.
|
| Fri, 17 Oct 2014 17:29:30 +0200 |
Raimund Renkert |
Do not add a sounding width facet for bed height differences.
|
| Fri, 17 Oct 2014 17:21:40 +0200 |
Raimund Renkert |
fixed bed difference export.
|
| Fri, 17 Oct 2014 17:05:59 +0200 |
Tom Gottfried |
There might be no sounding width given at some stations of a bed height single.
|
| Fri, 17 Oct 2014 16:08:25 +0200 |
Sascha L. Teichmann |
Removed obsolete import.
|
| Fri, 17 Oct 2014 16:06:37 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
| Fri, 17 Oct 2014 16:05:27 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
| Fri, 17 Oct 2014 13:34:47 +0200 |
Raimund Renkert |
Added i18n strings for sounding width and data gap.
|
| Fri, 17 Oct 2014 13:34:08 +0200 |
Raimund Renkert |
Bedheight differences exports sounding width and data gap for minuend and subtrahend.
|
| Fri, 17 Oct 2014 13:17:12 +0200 |
Sascha L. Teichmann |
Only draw discharge curve if on same station as navigation.
|
| Fri, 17 Oct 2014 12:50:35 +0200 |
Sascha L. Teichmann |
Removed morpho width from bed height diffs.
|
| Fri, 17 Oct 2014 11:44:01 +0200 |
Tom Gottfried |
Do not filter bed heights by year in datacage for optional data (plus some cleanup).
|
| Thu, 16 Oct 2014 16:45:53 +0200 |
Tom Gottfried |
Give ordered list of measurement stations at river.
|
| Thu, 16 Oct 2014 13:39:22 +0200 |
Tom Gottfried |
Add comment to measurement stations info.
|
| Thu, 16 Oct 2014 11:15:09 +0200 |
Tom Gottfried |
Reduce code duplication and repair filter for sediment load-recommendations.
|
| Wed, 15 Oct 2014 19:48:20 +0200 |
Tom Gottfried |
SCHEMA CHANGE: 'comment' is not acceptable as column name for Oracle.
|
| Wed, 15 Oct 2014 19:42:19 +0200 |
Tom Gottfried |
More detailed documentation on SQ-relation import.
|
| Wed, 15 Oct 2014 19:35:35 +0200 |
Tom Gottfried |
We only want to use stations with an end km.
|
| Wed, 15 Oct 2014 19:20:26 +0200 |
Tom Gottfried |
SCHEMA CHANGE: removed superfluous columns station and river_id from measurement_stations and adapted other components accordingly.
|
| Wed, 15 Oct 2014 14:58:46 +0200 |
Tom Gottfried |
SCHEMA CHANGE: There is no boolean data type in oracle, and therefore it's no good idea to use it in postgresql.
|
| Tue, 14 Oct 2014 19:21:33 +0200 |
Tom Gottfried |
Whitespace cleanup and small addition regarding sediment load at measurement stations.
|
| Tue, 14 Oct 2014 16:33:54 +0200 |
Tom Gottfried |
Purge redundant station-column (the values will go to kmstart).
|
| Tue, 14 Oct 2014 16:32:06 +0200 |
Tom Gottfried |
Purge sorting stations without range to end of list.
|
| Tue, 14 Oct 2014 15:22:11 +0200 |
Tom Gottfried |
Put date range into facet descriptions for curve and measurements.
|
| Tue, 14 Oct 2014 12:41:37 +0200 |
Tom Gottfried |
Distinguish between types of measurement stations and filter appropriately (plus minor cleanup in related classes).
|
| Mon, 13 Oct 2014 17:22:52 +0200 |
Tom Gottfried |
Unify colors of SQ-relations and distinguish outliers by point size.
|
| Mon, 13 Oct 2014 16:21:09 +0200 |
Tom Gottfried |
Remove non-mapped dependencies of removed theme.
|
| Mon, 13 Oct 2014 14:40:47 +0200 |
Tom Gottfried |
Theme-style cleanup for discharge curves.
|
| Fri, 10 Oct 2014 15:44:34 +0200 |
Tom Gottfried |
Add possibility to give custom client log4j.properties.
|
| Fri, 10 Oct 2014 00:58:30 +0200 |
Tom Gottfried |
Added tag 3.1.7 for changeset 319aa972a1a3
|
| Thu, 09 Oct 2014 12:13:56 +0200 |
Raimund Renkert |
Fixed date filter for fix overview.
3.1.7
|
| Thu, 09 Oct 2014 12:20:48 +0200 |
Tom Gottfried |
Log successful/unsuccessful authentication without traceback.
|
| Thu, 09 Oct 2014 12:13:30 +0200 |
Sascha L. Teichmann |
Backed out changeset da67b2bca1c0 Not needed.
|
| Thu, 09 Oct 2014 11:57:17 +0200 |
Sascha L. Teichmann |
Fixing overview filter: Accept date range as UNIX time stamps, too.
|
| Wed, 08 Oct 2014 16:28:02 +0200 |
Raimund Renkert |
Add location data to sq relation artifact. Fixed station name.
|
| Wed, 08 Oct 2014 16:23:46 +0200 |
Raimund Renkert |
Added location to measurement station sq relation.
|
| Wed, 08 Oct 2014 15:41:47 +0200 |
Tom Gottfried |
Further subtitle cleanup (including obsolete classes using them).
|
| Wed, 08 Oct 2014 12:27:53 +0200 |
Raimund Renkert |
If context contains pnp, transform W to m.
|
| Wed, 08 Oct 2014 11:49:07 +0200 |
Sascha L. Teichmann |
Only the master-artifact should decide about injected CURRENT_KM et al. (and removed dependend obsolete class).
|
| Wed, 08 Oct 2014 11:02:16 +0200 |
Raimund Renkert |
Removed dependency to FixWQCurveGenerator in processor.
|
| Tue, 07 Oct 2014 19:19:50 +0200 |
Tom Gottfried |
For whatever reason (if any) facet descriptions with trailing whitespace are stripped from the legend.
|
| Tue, 07 Oct 2014 19:04:06 +0200 |
Tom Gottfried |
Removed some code duplication and moved macros to more appropriate places in file.
|
| Tue, 07 Oct 2014 19:02:50 +0200 |
Tom Gottfried |
Fixed some typos in datacage docs.
|
| Tue, 07 Oct 2014 15:23:08 +0200 |
Tom Gottfried |
Unify discharge curve subtitles.
|
| Tue, 07 Oct 2014 13:41:54 +0200 |
Raimund Renkert |
Try to determine gauge by km in gauge discharge facet for exporter.
|
| Tue, 07 Oct 2014 11:24:13 +0200 |
Tom Gottfried |
Use more recent SmartGWT-build.
|
| Tue, 07 Oct 2014 11:23:39 +0200 |
Tom Gottfried |
Add possibility to give custom config for server log.
|
| Mon, 06 Oct 2014 19:07:57 +0200 |
Tom Gottfried |
Transform export in cm at gauge. TODO: don't transfrom twice if coming from PegelInfo.
|
| Mon, 06 Oct 2014 15:33:52 +0200 |
Raimund Renkert |
merged.
|
| Mon, 06 Oct 2014 15:27:20 +0200 |
Raimund Renkert |
Use context constant for current km in fix delta w/t generator.
|
| Mon, 06 Oct 2014 14:49:00 +0200 |
Tom Gottfried |
Purge RiverUtils from ATExporter.
|
| Mon, 06 Oct 2014 13:41:14 +0200 |
Tom Gottfried |
Manual points shall be plotted in discharge diagrams.
|
| Mon, 06 Oct 2014 11:21:42 +0200 |
Tom Gottfried |
It's the description we want to see in the legend, not the facet name.
|
| Fri, 03 Oct 2014 10:26:58 +0200 |
Tom Gottfried |
Q-symmetric datacage configuration for user-data.
|
| Thu, 02 Oct 2014 19:31:09 +0200 |
Tom Gottfried |
Make derived curve-diagram working with subtitle.
|
| Thu, 02 Oct 2014 19:05:01 +0200 |
Tom Gottfried |
Re-add line previously removed accidentally between lots of comments.
|
| Thu, 02 Oct 2014 18:57:10 +0200 |
Sascha L. Teichmann |
Added km sub title to fix derivate curve, too.
|
| Thu, 02 Oct 2014 16:33:16 +0200 |
Sascha L. Teichmann |
Removed obsolete import.
|
| Thu, 02 Oct 2014 14:02:57 +0200 |
Raimund Renkert |
merged.
|
| Thu, 02 Oct 2014 14:01:13 +0200 |
Raimund Renkert |
Added i18n strings.
|
| Thu, 02 Oct 2014 13:59:20 +0200 |
Raimund Renkert |
Fixed W/Q diagram subtitle in fix analysis.
|
| Thu, 02 Oct 2014 13:57:50 +0200 |
Raimund Renkert |
Use the CURRENT_KM constant from injectors.
|
| Thu, 02 Oct 2014 11:49:15 +0200 |
Tom Gottfried |
The current km is needed for SQ diagrams too.
|
| Thu, 02 Oct 2014 11:46:44 +0200 |
Tom Gottfried |
Overwriting the current km in context gives unexpected results if artifacts from different km have been loaded.
|
| Thu, 02 Oct 2014 11:04:14 +0200 |
Tom Gottfried |
s/logger/log/ or removed unused logger.
|
| Thu, 02 Oct 2014 10:13:31 +0200 |
Tom Gottfried |
dataset can be null.
|
| Thu, 02 Oct 2014 09:55:31 +0200 |
Tom Gottfried |
Fetch current km from context (and remove obsolete or superfluous comments and logging).
|
| Thu, 02 Oct 2014 09:42:12 +0200 |
Tom Gottfried |
wUnit might be null.
|
| Wed, 01 Oct 2014 15:54:47 +0200 |
Tom Gottfried |
Purge obsolete representation of reference system for discharge tables.
|
| Wed, 01 Oct 2014 15:42:55 +0200 |
Tom Gottfried |
Instead of adding datum to Q-values, correctly transform W-values to meter above datum.
|
| Wed, 01 Oct 2014 15:24:21 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
| Wed, 01 Oct 2014 15:21:54 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
| Wed, 01 Oct 2014 14:13:41 +0200 |
Tom Gottfried |
Deliver historical discharge curves in meter, not centimeter over datum.
|
| Wed, 01 Oct 2014 13:42:19 +0200 |
Raimund Renkert |
merged.
|
| Wed, 01 Oct 2014 13:41:38 +0200 |
Raimund Renkert |
Use the current km from context for fix analysis W/Q subtitle.
|
| Wed, 01 Oct 2014 13:40:39 +0200 |
Raimund Renkert |
Updated i18n strings.
|
| Wed, 01 Oct 2014 13:40:04 +0200 |
Raimund Renkert |
Added y axis label to discharge processors.
|
| Wed, 01 Oct 2014 13:37:27 +0200 |
Raimund Renkert |
Use i18n string for w in cm axis.
|
| Wed, 01 Oct 2014 13:36:35 +0200 |
Raimund Renkert |
Fixed i18n string for x axis label in discharge curves.
|
| Wed, 01 Oct 2014 13:40:30 +0200 |
Tom Gottfried |
Never ever set current km via RiverUtils.
|
| Wed, 01 Oct 2014 13:37:43 +0200 |
Tom Gottfried |
Remove misplaced file extension.
|
| Wed, 01 Oct 2014 12:23:39 +0200 |
Tom Gottfried |
Let injectors be strictly distinct from each other and give more meaningful names (they know what they do, not where they will be used. The latter is configuration).
|
| Wed, 01 Oct 2014 12:13:28 +0200 |
Sascha L. Teichmann |
Correct url parameter in client.
|
| Wed, 01 Oct 2014 12:01:46 +0200 |
Sascha L. Teichmann |
There ist no need to format a number as a string and then re-parse it to double to get its double value. Just take the double value!
|
| Wed, 01 Oct 2014 11:07:52 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
| Tue, 30 Sep 2014 15:18:09 +0200 |
Tom Gottfried |
Auto-include zero in Q-domain axis.
|
| Tue, 30 Sep 2014 14:40:02 +0200 |
Raimund Renkert |
Use ws in m for duration curve.
|
| Tue, 30 Sep 2014 13:03:55 +0200 |
Tom Gottfried |
Remove duplication of AnnotationHelper-code in ChartGenerator.
|
| Tue, 30 Sep 2014 11:52:17 +0200 |
Tom Gottfried |
Allow W-mainvalues in SQ-relation.
|
| Tue, 30 Sep 2014 11:50:43 +0200 |
Tom Gottfried |
Introduce annotations, which know to which axis they belong.
|
| Tue, 30 Sep 2014 10:57:58 +0200 |
Raimund Renkert |
Create mainvalue facets before setting up the artifact.
|
| Mon, 29 Sep 2014 15:49:04 +0200 |
Raimund Renkert |
Look for gauge if no pnp is set in the context and return w in cm if at gauge.
|
| Fri, 26 Sep 2014 18:23:45 +0200 |
Tom Gottfried |
Scale second W-axis in cm according to first axis, which is expanded relative to the data, and set bounds for zooming purposes (plus a bit of cleanup in DiagramGenerator).
|
| Fri, 26 Sep 2014 17:22:51 +0200 |
Tom Gottfried |
Avoid NPE if river is not accessible.
|
| Fri, 26 Sep 2014 14:22:37 +0200 |
Tom Gottfried |
The derivative curve is also a discharge diagram.
|
| Fri, 26 Sep 2014 14:18:27 +0200 |
Tom Gottfried |
Throw non-lethal XPathException if not at gauge instead of lethal PSQLException if at gauge.
|
| Fri, 26 Sep 2014 10:53:26 +0200 |
Tom Gottfried |
Q-main values as recommendations in SQ. TODO: solve DDZ.
|
| Fri, 26 Sep 2014 10:50:54 +0200 |
Tom Gottfried |
Let's be more generous with facet activity of main values.
|
| Fri, 26 Sep 2014 10:17:02 +0200 |
Tom Gottfried |
bed_height_single.old_elevation_model_id is not NOT NULL.
|
| Fri, 26 Sep 2014 09:44:48 +0200 |
Tom Gottfried |
Main values: Reduce code duplication and correct logic to specify whether we are at gauge or not.
|
| Fri, 26 Sep 2014 08:40:20 +0200 |
Tom Gottfried |
Avoid NPE if no dataset is activated in theme list.
|
| Fri, 26 Sep 2014 08:36:28 +0200 |
Raimund Renkert |
Added config for sq relation loaded via datacage.
|
| Thu, 25 Sep 2014 17:25:07 +0200 |
Raimund Renkert |
merged.
|
| Thu, 25 Sep 2014 17:24:35 +0200 |
Raimund Renkert |
Use the sq relation artifact to load data from datacage.
|
| Thu, 25 Sep 2014 17:23:12 +0200 |
Raimund Renkert |
Inject current km and pnp into the context used to calculate W in cm at gauge.
|
| Thu, 25 Sep 2014 12:21:47 +0200 |
Tom Gottfried |
Reduce misspelled, superfluous logging.
|
| Thu, 25 Sep 2014 11:00:31 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
| Thu, 25 Sep 2014 10:56:44 +0200 |
Sascha L. Teichmann |
Use right logger in DischargeGenerator.
|
| Thu, 25 Sep 2014 10:38:21 +0200 |
Sascha L. Teichmann |
Run native2ascii over FLYS*.properties.
|
| Wed, 24 Sep 2014 18:33:11 +0200 |
Sascha L. Teichmann |
Added missing l10n strings.
|
| Wed, 24 Sep 2014 17:39:29 +0200 |
Sascha L. Teichmann |
Generate a W in CM axis if there are W data.
|
| Wed, 24 Sep 2014 16:42:55 +0200 |
Sascha L. Teichmann |
Added PNP injectors to Q/X diagrams.
|
| Wed, 24 Sep 2014 16:38:13 +0200 |
Sascha L. Teichmann |
And Developer said, Let there be Q symmetry and there was Q symmetry.
|
| Wed, 24 Sep 2014 16:24:32 +0200 |
Tom Gottfried |
Do not die if values <= 0 are tried to be plotted on log axis.
|
| Wed, 24 Sep 2014 13:29:34 +0200 |
Tom Gottfried |
Make ChartArea and thus annotations sensible for logarithmic axes (plus some minor cleanup).
|
| Wed, 24 Sep 2014 12:16:53 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
| Wed, 24 Sep 2014 12:02:37 +0200 |
Raimund Renkert |
merged.
|
| Wed, 24 Sep 2014 12:02:05 +0200 |
Raimund Renkert |
Updated the client to build a default artifact for sq relations.
|
| Wed, 24 Sep 2014 11:59:49 +0200 |
Raimund Renkert |
Configured "static" sq relation to use a default D4EArtifact and two states to hold the parameters and outs.
|
| Wed, 24 Sep 2014 11:56:03 +0200 |
Raimund Renkert |
Renamed ui provider for static data panel.
|
| Tue, 23 Sep 2014 16:45:47 +0200 |
Tom Gottfried |
Make SQ-relations loadable in WQ-diagrams.
|
| Tue, 23 Sep 2014 15:07:39 +0200 |
Tom Gottfried |
Make WQ-data loadable in SQ-diagrams. We still need to handle mainvalues and values <=0 on x-axis.
|
| Tue, 23 Sep 2014 12:56:23 +0200 |
Tom Gottfried |
Q-symmetry: SQ-relations should not be filtered for specific outs (and optimised statement a bit).
|
| Tue, 23 Sep 2014 10:11:52 +0200 |
Tom Gottfried |
Put all macros for wst-data in one place and reduce code duplications.
|
| Mon, 22 Sep 2014 18:17:47 +0200 |
Tom Gottfried |
Remove duplications from discharge prototypes and put it all together.
|
| Mon, 22 Sep 2014 17:11:20 +0200 |
Raimund Renkert |
merged.
|
| Mon, 22 Sep 2014 17:10:23 +0200 |
Raimund Renkert |
Added injector for PNP.
|
| Mon, 22 Sep 2014 17:08:48 +0200 |
Raimund Renkert |
Updated the client to build a default artifact for gauge discharge curve.
|
| Mon, 22 Sep 2014 17:05:37 +0200 |
Raimund Renkert |
Configured gauge discharge curve to use a default D4EArtifact and two states to hold the parameters and outs.
|
| Fri, 19 Sep 2014 16:29:11 +0200 |
Tom Gottfried |
Classify and sort iteration over user-data non-recommendations.
|
| Fri, 19 Sep 2014 16:07:59 +0200 |
Tom Gottfried |
Classify and sort iteration over non-recommendations.
|
| Fri, 19 Sep 2014 15:45:54 +0200 |
Tom Gottfried |
Classify and sort iteration over recommendations.
|
| Fri, 19 Sep 2014 15:31:03 +0200 |
Tom Gottfried |
Purge clash of out-names, resulting hacks and tests for not existing outs and give some more meaningful names.
|
| Fri, 19 Sep 2014 09:49:09 +0200 |
Tom Gottfried |
Official sedimentload epochs should be seperated from other data in datacage.
|
| Thu, 18 Sep 2014 18:41:14 +0200 |
Tom Gottfried |
These meta-lines had been invented before.
|
| Thu, 18 Sep 2014 18:16:51 +0200 |
Tom Gottfried |
At least since rev eb052d759fcc, there are no bed height epochs anymore.
|
| Wed, 17 Sep 2014 19:46:19 +0200 |
Tom Gottfried |
Added tag 3.1.6 for changeset 301a32bd7045
|
| Wed, 17 Sep 2014 19:28:39 +0200 |
Tom Gottfried |
Though not yet part of the calculation, suspended load has to be optionally loadable through datacage.
3.1.6
|
| Wed, 17 Sep 2014 17:56:37 +0200 |
Tom Gottfried |
Set facet activity for middle bed height.
|
| Wed, 17 Sep 2014 17:35:36 +0200 |
Tom Gottfried |
Add theme for porosity and sync second with default.
|
| Wed, 17 Sep 2014 17:13:48 +0200 |
Tom Gottfried |
In case the list is not ordered, in the end diagrams might look weird.
|
| Wed, 17 Sep 2014 13:24:13 +0200 |
Tom Gottfried |
Consider new SQ-diagrams in datacage config.
|
| Wed, 17 Sep 2014 13:12:12 +0200 |
Tom Gottfried |
Essentially backout rev 8ad0b7bc3e73 as this makes some SQ-relation curves appear buckled.
|
| Wed, 17 Sep 2014 13:00:14 +0200 |
Tom Gottfried |
Avoid NPE if river is not accessible.
|
| Wed, 17 Sep 2014 12:32:24 +0200 |
Raimund Renkert |
merged.
|
| Wed, 17 Sep 2014 12:32:01 +0200 |
Raimund Renkert |
Fixed style for sq relation link in measurement station info grid.
|
| Wed, 17 Sep 2014 09:22:50 +0200 |
Tom Gottfried |
i18n is meant for translation and unfortunately the client has three files for that.
|
| Wed, 17 Sep 2014 09:04:30 +0200 |
Raimund Renkert |
merged.
|
| Wed, 17 Sep 2014 09:03:39 +0200 |
Raimund Renkert |
Avoid NPE in discharge context injector if no start km was set.
|
| Wed, 17 Sep 2014 09:02:44 +0200 |
Raimund Renkert |
Added themes for new fraction in sq relation.
|
| Wed, 17 Sep 2014 09:01:27 +0200 |
Raimund Renkert |
Added new fraction to sq relation.
|
| Tue, 16 Sep 2014 18:48:34 +0200 |
Tom Gottfried |
Outs might be set in the client.
|
| Tue, 16 Sep 2014 18:33:46 +0200 |
Tom Gottfried |
Crude script to find non-existant outs in meta-data.xml
|
| Tue, 16 Sep 2014 16:10:30 +0200 |
Tom Gottfried |
Update comment on conditional loading of user content.
|
| Tue, 16 Sep 2014 14:57:55 +0200 |
Raimund Renkert |
merged.
|
| Tue, 16 Sep 2014 14:57:14 +0200 |
Raimund Renkert |
The default state is no more abstract.
|
| Tue, 16 Sep 2014 12:12:06 +0200 |
Tom Gottfried |
Set facet activity for bed quality.
|
| Tue, 16 Sep 2014 11:33:08 +0200 |
Tom Gottfried |
Add metadata to bedheight facets in bed height differences.
|
| Mon, 15 Sep 2014 15:38:16 +0200 |
Sascha L. Teichmann |
Adopt configuation of artifacts into new xml documents to make them configurable inline.
|
| Mon, 15 Sep 2014 15:00:48 +0200 |
Tom Gottfried |
Purge some duplicated logging an misleading comments.
|
| Mon, 15 Sep 2014 11:58:31 +0200 |
Tom Gottfried |
Call orphaned macro originating from 'fix_wq_curve' in prototype.
|
| Mon, 15 Sep 2014 11:26:48 +0200 |
Tom Gottfried |
Make use of publicly available external WMS (Pegelonline) otherwise called from BfG-specific macro.
|
| Fri, 12 Sep 2014 19:09:24 +0200 |
Tom Gottfried |
Remove call of BfG-specific macro.
|
| Fri, 12 Sep 2014 19:00:45 +0200 |
Tom Gottfried |
A bit less chaos in i18n for bed heights.
|
| Fri, 12 Sep 2014 14:56:49 +0200 |
Raimund Renkert |
merged.
|
| Fri, 12 Sep 2014 14:56:22 +0200 |
Raimund Renkert |
Added themes for SQ relation overview chart.
|
| Fri, 12 Sep 2014 14:55:42 +0200 |
Raimund Renkert |
SQ relation overview is now a single chart containing all fractions.
|
| Fri, 12 Sep 2014 13:12:25 +0200 |
Sascha L. Teichmann |
Added discharge curve prototye.
|
| Fri, 12 Sep 2014 08:42:41 +0200 |
Raimund Renkert |
Fixed location distance panel. TODO: Switch to location table and select tabs.
|
| Fri, 12 Sep 2014 08:39:10 +0200 |
Raimund Renkert |
Fixed multi period panel in fix analysis.
|
| Thu, 11 Sep 2014 17:37:03 +0200 |
Tom Gottfried |
Making i18n work was just easier using less wrappers in this case (issue1631).
|
| Thu, 11 Sep 2014 16:12:39 +0200 |
Tom Gottfried |
Measurement stations without range should not be used in calculation and we assume the beginning of the range is the station.
|
| Thu, 11 Sep 2014 14:45:17 +0200 |
Tom Gottfried |
Suspended sand is part of total load.
|
| Thu, 11 Sep 2014 11:23:10 +0200 |
Raimund Renkert |
merged.
|
| Thu, 11 Sep 2014 11:22:38 +0200 |
Raimund Renkert |
Fixed date range panel in fix analysis.
|
| Wed, 10 Sep 2014 12:45:35 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
| Wed, 10 Sep 2014 12:42:39 +0200 |
Sascha L. Teichmann |
Made call context injectors a list of comma separated classes.
|
| Wed, 10 Sep 2014 10:02:46 +0200 |
Raimund Renkert |
merged.
|
| Wed, 10 Sep 2014 10:01:57 +0200 |
Raimund Renkert |
Added injectors to config and moved subtitle conf.
|
| Wed, 10 Sep 2014 10:01:11 +0200 |
Raimund Renkert |
Added context injectors for discharge curves.
|
| Tue, 09 Sep 2014 20:08:12 +0200 |
Tom Gottfried |
Added tag 3.1.5 for changeset d81c4b0d5ca7
|
| Tue, 09 Sep 2014 19:05:08 +0200 |
Tom Gottfried |
Write CSV-header only once.
3.1.5
|
| Tue, 09 Sep 2014 18:41:11 +0200 |
Tom Gottfried |
Fix duration curve i18n.
|
| Tue, 09 Sep 2014 17:05:21 +0200 |
Tom Gottfried |
Some i18n completion in hist. discharge curves.
|
| Tue, 09 Sep 2014 16:29:53 +0200 |
Tom Gottfried |
Enable dynamic zoom-range in subtitle.
|
| Tue, 09 Sep 2014 14:53:12 +0200 |
Tom Gottfried |
Patch build from given date not available anymore.
|
| Tue, 09 Sep 2014 13:49:28 +0200 |
Tom Gottfried |
We well want to average NaNs but want to know the cause of the result being NaN.
|
| Tue, 09 Sep 2014 12:03:46 +0200 |
Tom Gottfried |
Suggestion: sort measurement stations along the river and only along the river.
|
| Tue, 09 Sep 2014 11:13:37 +0200 |
Andre Heinecke |
(issue1448) Fix info service for epoch / periods and off epoch
|
| Tue, 09 Sep 2014 10:53:50 +0200 |
Tom Gottfried |
Suggestion: Load official epochs via recommendations instead of a pseudo-calculation.
|
| Mon, 08 Sep 2014 19:48:17 +0200 |
Andre Heinecke |
(issue1448) Actually filter out not matching sq_time_interval_ids
|
| Mon, 08 Sep 2014 19:47:01 +0200 |
Andre Heinecke |
(issue1448) Objectify sq_time_interval id.
|
| Mon, 08 Sep 2014 19:01:26 +0200 |
Andre Heinecke |
(issue1448) Finally use the sq time interval as filter in the calculation.
|
| Mon, 08 Sep 2014 19:00:30 +0200 |
Andre Heinecke |
(issue1448) Unify SedimentLoadData ctor again
|
| Mon, 08 Sep 2014 18:59:10 +0200 |
Andre Heinecke |
(issue1448) Add Sq time interval to sediment load accessor
|
| Mon, 08 Sep 2014 18:31:17 +0200 |
Andre Heinecke |
(issue1448) Look through all the data for sq_ti_id in following states.
|
| Mon, 08 Sep 2014 17:52:52 +0200 |
Andre Heinecke |
(issue1448) Carry sq_ti_date in artifact description anf fix sqtipanel
|
| Mon, 08 Sep 2014 17:50:10 +0200 |
Andre Heinecke |
(issue1448) Use correct data name for ti_id and carry string value of selected date.
|
| Mon, 08 Sep 2014 16:24:50 +0200 |
Andre Heinecke |
(issue1448) In a list of one element. Select the only element.
|
| Mon, 08 Sep 2014 16:24:16 +0200 |
Andre Heinecke |
(issue1448) Add Panel for new sq_ti_select state
|
| Mon, 08 Sep 2014 16:23:38 +0200 |
Andre Heinecke |
(issue1448) Extend SedimentLoadInfo request to handle sq time intervals
|
| Mon, 08 Sep 2014 16:21:26 +0200 |
Andre Heinecke |
(issue1448) Extend SL info service to handle sq_time_intervals
|
| Mon, 08 Sep 2014 16:19:15 +0200 |
Andre Heinecke |
(issue1448) Fix return values of SQ time interval accessors
|
| Mon, 08 Sep 2014 16:18:37 +0200 |
Andre Heinecke |
(issue1448) Add l10n for new sq time interval state.
|
| Mon, 08 Sep 2014 16:17:59 +0200 |
Andre Heinecke |
(issue1448) Add SQ Time interval select state
|
| Mon, 08 Sep 2014 16:14:43 +0200 |
Sascha L. Teichmann |
Pass request document to the context injectors.
|
| Mon, 08 Sep 2014 16:06:50 +0200 |
Sascha L. Teichmann |
Merged.
|
| Mon, 08 Sep 2014 16:06:34 +0200 |
Sascha L. Teichmann |
Made it compile with changed ContextInjector interface again.
|
| Mon, 08 Sep 2014 15:54:12 +0200 |
Tom Gottfried |
Let official epochs be showy and remove detritus of 'yields' in datacage config.
|
| Mon, 08 Sep 2014 15:48:11 +0200 |
Sascha L. Teichmann |
Call context inspector in output helper.
|
| Mon, 08 Sep 2014 13:33:39 +0200 |
Sascha L. Teichmann |
Stop stupid propagation of out subtype in generators. What is this? It is not used anyway.
|
| Mon, 08 Sep 2014 13:17:49 +0200 |
Sascha L. Teichmann |
Added context injector to generators.
|
| Mon, 08 Sep 2014 12:28:16 +0200 |
Sascha L. Teichmann |
Merged
|
| Mon, 08 Sep 2014 12:27:55 +0200 |
Sascha L. Teichmann |
Anti programming: Throw CrossSectionApp away. Not useful ATM. The backing data structures are fine now and the original purpose of the app was to figure them out.
|
| Mon, 08 Sep 2014 12:25:47 +0200 |
Tom Gottfried |
We only need to know what's going on upstream.
|
| Mon, 08 Sep 2014 12:21:32 +0200 |
Tom Gottfried |
Fetch missing values from database and show them in diagrams.
|
| Mon, 08 Sep 2014 10:03:00 +0200 |
Tom Gottfried |
Allow fractions without SQ-time interval (suspended sediment) to be loaded.
|
| Fri, 05 Sep 2014 20:57:31 +0200 |
Tom Gottfried |
Error reports for sediment load calculation.
|
| Fri, 05 Sep 2014 19:30:50 +0200 |
Andre Heinecke |
Do not inherit smartgwt include the javascript directly in FLYS.html
superdev
|
| Fri, 05 Sep 2014 19:29:11 +0200 |
Andre Heinecke |
Update GWT to 2.6.1
superdev
|
| Fri, 05 Sep 2014 15:09:44 +0200 |
Andre Heinecke |
(issue1448) Use left join to permit loads with empty sq_time intervals to be handled.
|
| Fri, 05 Sep 2014 18:30:20 +0200 |
Sascha L. Teichmann |
Fixed broken build.
|
| Fri, 05 Sep 2014 18:23:36 +0200 |
Sascha L. Teichmann |
Sediment load: converted grain fraction name to an array lookup.
|
| Fri, 05 Sep 2014 16:54:45 +0200 |
Raimund Renkert |
Added new processor for fix derived curve.
|
| Fri, 05 Sep 2014 15:57:39 +0200 |
Raimund Renkert |
Added processor for discharge curve in fixanalysis.
|
| Fri, 05 Sep 2014 15:26:40 +0200 |
Tom Gottfried |
Do not return pure NaN data.
|
| Fri, 05 Sep 2014 14:53:58 +0200 |
Tom Gottfried |
Sediment loads at measurement stations and longitudinal sections need different processing and styling for diagrams.
|
| Fri, 05 Sep 2014 13:19:22 +0200 |
Sascha L. Teichmann |
sed 's/logger/log/g' src/**/*.java
|
| Fri, 05 Sep 2014 12:58:17 +0200 |
Sascha L. Teichmann |
sed src/**/*.java 's/logger/log/g'
|
| Fri, 05 Sep 2014 12:54:58 +0200 |
Sascha L. Teichmann |
Make it compile again.
|
| Fri, 05 Sep 2014 12:50:33 +0200 |
Sascha L. Teichmann |
sed -i src/**/*.java 's/logger/log/g'
|
| Fri, 05 Sep 2014 12:22:42 +0200 |
Andre Heinecke |
(issue1448) Add sq time intervals to sediment load data model.
|
| Fri, 05 Sep 2014 12:19:13 +0200 |
Sascha L. Teichmann |
Forget to adjust a string reference to a moved backend utils class.
|
| Fri, 05 Sep 2014 10:27:50 +0200 |
Sascha L. Teichmann |
Anti programming: Removed obsolete classes in client. This may break stuff because of the GWT magic.
|
| Fri, 05 Sep 2014 10:10:42 +0200 |
Sascha L. Teichmann |
Find obsolete Java files in more than one project hierachie.
|
| Fri, 05 Sep 2014 10:09:16 +0200 |
Sascha L. Teichmann |
Anti programming: Removed TIM parser which ist not needed any longer.
|
| Thu, 04 Sep 2014 17:47:32 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
| Thu, 04 Sep 2014 17:33:01 +0200 |
Tom Gottfried |
Sum up fractions from stations and previous stations according to respective validity model.
|
| Thu, 04 Sep 2014 16:25:06 +0200 |
Sascha L. Teichmann |
Add Q'n'D Python script to find obsolete Java files.
|
| Thu, 04 Sep 2014 15:48:48 +0200 |
Sascha L. Teichmann |
merged
|
| Thu, 04 Sep 2014 15:43:13 +0200 |
Sascha L. Teichmann |
Anti programming.
|
| Thu, 04 Sep 2014 15:27:47 +0200 |
Raimund Renkert |
merged.
|
| Thu, 04 Sep 2014 15:26:55 +0200 |
Raimund Renkert |
Use processors for historical discharge curves.
|
| Thu, 04 Sep 2014 15:03:25 +0200 |
Sascha L. Teichmann |
Moved package org.dive4elements.river.utils to org.dive4elements.river.backend.utils.
|
| Thu, 04 Sep 2014 13:00:55 +0200 |
Sascha L. Teichmann |
Removed NASTY package clash. We had too org.dive4elements.river.util packages.
|
| Thu, 04 Sep 2014 12:03:02 +0200 |
Tom Gottfried |
Removed obsolete average and renamed some symbols to make the difference between single fractions and sums of them clearer in the calculation.
|
| Thu, 04 Sep 2014 12:00:17 +0200 |
Sascha L. Teichmann |
Remove dead class.
|
| Thu, 04 Sep 2014 11:15:34 +0200 |
Raimund Renkert |
merged.
|
| Thu, 04 Sep 2014 11:14:24 +0200 |
Raimund Renkert |
Changed discharge processor to plot only discharge curves and added processor for computed discharge curves.
|
| Thu, 04 Sep 2014 11:10:37 +0200 |
Raimund Renkert |
Added new processor to plot misc discharge data, e.g. from datacage or recommendations.
|
| Wed, 03 Sep 2014 18:21:35 +0200 |
Tom Gottfried |
The existing implementation respects the fact that months are 0-based.
|
| Wed, 03 Sep 2014 16:46:09 +0200 |
Tom Gottfried |
Complete CSV-export and correct headers.
|
| Wed, 03 Sep 2014 10:24:39 +0200 |
Tom Gottfried |
Rev aa80f9ba56a9 was incomplete. Shame on me.
|
| Wed, 03 Sep 2014 09:55:32 +0200 |
Tom Gottfried |
We have to calculate bed load plus suspended sand instead of suspended load.
|
| Tue, 02 Sep 2014 17:47:03 +0200 |
Tom Gottfried |
Let epochs be averages over their years.
|
| Tue, 02 Sep 2014 17:10:22 +0200 |
Tom Gottfried |
Precalculated sums from the database will come through recommendations.
|
| Tue, 02 Sep 2014 14:46:20 +0200 |
Tom Gottfried |
Make sedimentload loadable as old calculation.
|
| Mon, 01 Sep 2014 17:50:22 +0200 |
Tom Gottfried |
Only calculated sums of fractions should be initially shown in diagram.
|
| Mon, 01 Sep 2014 12:34:39 +0200 |
Tom Gottfried |
Fix fraction respectively facet names and descriptions.
|
| Mon, 01 Sep 2014 10:15:57 +0200 |
Tom Gottfried |
Broken -> broke away.
|
| Mon, 01 Sep 2014 10:09:53 +0200 |
Tom Gottfried |
Do not handle the impossible.
|
| Mon, 01 Sep 2014 09:43:55 +0200 |
Tom Gottfried |
Handle missing years in bed height differences without assuming an unknown year to be BC 1.
|
| Fri, 29 Aug 2014 17:00:26 +0200 |
Sascha L. Teichmann |
Converted configuration for discharge diagrams to the new Q symmetry style.
|
| Fri, 29 Aug 2014 16:42:58 +0200 |
Sascha L. Teichmann |
Added diagram defaults for discharge diagrams.
|
| Fri, 29 Aug 2014 16:24:12 +0200 |
Sascha L. Teichmann |
Renamed tag in sq relation defaults to a more fitting name.
|
| Fri, 29 Aug 2014 16:21:31 +0200 |
Sascha L. Teichmann |
Added new diagramm generator for Q symmetry.
|
| Fri, 29 Aug 2014 15:44:08 +0200 |
Sascha L. Teichmann |
More shoveling araound generators.
|
| Fri, 29 Aug 2014 15:22:33 +0200 |
Sascha L. Teichmann |
Added a woking copy for discharge diagramm generators. All modifications are go in here. If the process is finished we'll remove the old one and rename the copy to discharge-diagramms.xml
|
| Fri, 29 Aug 2014 13:03:11 +0200 |
Tom Gottfried |
We have only 4 of them.
|
| Fri, 29 Aug 2014 12:42:00 +0200 |
Sascha L. Teichmann |
More fixes for conf.xml
|
| Fri, 29 Aug 2014 12:27:35 +0200 |
Sascha L. Teichmann |
Moved external system entites back to conf.xml. Uncool.
|
| Fri, 29 Aug 2014 11:56:10 +0200 |
Sascha L. Teichmann |
Cleaned up generator dependencies.
|
| Fri, 29 Aug 2014 11:43:15 +0200 |
Sascha L. Teichmann |
Moved more generator stuff in reguarding sub directory.
|
| Fri, 29 Aug 2014 11:31:17 +0200 |
Sascha L. Teichmann |
Allow deeper nesting of output-generators in conf.xml. This allows better separation of concerns of different generator types.
|
| Fri, 29 Aug 2014 11:24:52 +0200 |
Sascha L. Teichmann |
Moved generators.xml and its dependencies to a directory of their own.
|
| Fri, 29 Aug 2014 11:21:35 +0200 |
Sascha L. Teichmann |
Moved external system entity for longitudinal sections default to generators.xml. TODO: Move in entirely different file.
|
| Fri, 29 Aug 2014 11:03:38 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
| Fri, 29 Aug 2014 10:49:38 +0200 |
Sascha L. Teichmann |
Fixed build error.
|
| Fri, 29 Aug 2014 09:25:00 +0200 |
Tom Gottfried |
The relevant contents are now in artifacts/doc/datacage_ref_de.rst.
|
| Thu, 28 Aug 2014 18:42:20 +0200 |
Tom Gottfried |
IDs can be assumed to be unique.
|
| Thu, 28 Aug 2014 15:34:57 +0200 |
Tom Gottfried |
Do not put metadata on series if there are none (avoid NPE).
|
| Thu, 28 Aug 2014 12:00:52 +0200 |
Tom Gottfried |
Quoting is done elsewhere since rev 7021753b3797.
|
| Wed, 27 Aug 2014 19:52:51 +0200 |
Tom Gottfried |
The rest is silence.
|
| Wed, 27 Aug 2014 16:47:38 +0200 |
Sascha L. Teichmann |
Make Logarithmic axis immun against negative values (not throwing Exceptions in that case).
|
| Wed, 27 Aug 2014 15:09:45 +0200 |
Tom Gottfried |
Let the facet know the period of it's data.
|
| Wed, 27 Aug 2014 15:01:54 +0200 |
Tom Gottfried |
Calculate all single years in given interval but only once.
|
| Tue, 26 Aug 2014 17:21:42 +0200 |
Sascha L. Teichmann |
Merged.
|
| Tue, 26 Aug 2014 17:21:16 +0200 |
Sascha L. Teichmann |
Datacage: Insert variable values literally into output.
|
| Tue, 26 Aug 2014 17:16:21 +0200 |
Tom Gottfried |
With the exception of real calculation results, descriptions of sediment loads can all follow the same pattern.
|
| Tue, 26 Aug 2014 12:09:18 +0200 |
Tom Gottfried |
Metadata in datacage tooltips for sediment densities, bed heights, flow velocities and sounding widhts.
|
| Tue, 26 Aug 2014 11:35:47 +0200 |
Sascha L. Teichmann |
Added missing generics parameter.
|
| Tue, 26 Aug 2014 11:28:03 +0200 |
Sascha L. Teichmann |
Sediment load: Remove simple tail recursive calls from SedimentLoadData.recursiveFindStations(). More carefully this time.
|
| Tue, 26 Aug 2014 11:18:03 +0200 |
Sascha L. Teichmann |
Removed obsolete same package imports.
|
| Tue, 26 Aug 2014 11:16:21 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
| Mon, 25 Aug 2014 20:12:11 +0200 |
Andre Heinecke |
Fix exporter loops
|
| Mon, 25 Aug 2014 20:03:35 +0200 |
Andre Heinecke |
Acctually use the new Sedilmentload calculation
|
| Mon, 25 Aug 2014 20:02:28 +0200 |
Andre Heinecke |
Make SedimentloadExporter work with the new result scheme.
|
| Mon, 25 Aug 2014 20:01:44 +0200 |
Andre Heinecke |
Correctly handle not creating facets and error reports.
|
| Mon, 25 Aug 2014 20:00:45 +0200 |
Andre Heinecke |
GetFractionByName now returns a list as it can differ in Epochs
|
| Mon, 25 Aug 2014 19:59:14 +0200 |
Andre Heinecke |
Add period to sedimentloaddataresult fraction
|
| Mon, 25 Aug 2014 19:58:00 +0200 |
Andre Heinecke |
Use old names for SedimentloadDataFractions and add average fraction
|
| Mon, 25 Aug 2014 17:28:48 +0200 |
Andre Heinecke |
Actually return the period in SedimentLoadAccess
|
| Mon, 25 Aug 2014 17:28:18 +0200 |
Andre Heinecke |
Fix compilation of last commit
|
| Mon, 25 Aug 2014 17:14:49 +0200 |
Sascha L. Teichmann |
Another fix for find stations in sediment load.
|
| Mon, 25 Aug 2014 16:04:35 +0200 |
Andre Heinecke |
Correctly output problems in SedimentLoadDataCalculate
|
| Mon, 25 Aug 2014 15:56:09 +0200 |
Andre Heinecke |
(issue1448) Add WIP SedimentLoadDataFacet and use it in calculation.
|
| Mon, 25 Aug 2014 12:18:35 +0200 |
Andre Heinecke |
(issue 1448) Use new data model for sedimentloadinfo
|
| Mon, 25 Aug 2014 12:05:37 +0200 |
Sascha L. Teichmann |
Sediment load: Fixed findStations() and add findLoads().
|
| Fri, 22 Aug 2014 18:00:35 +0200 |
Tom Gottfried |
Tooltip for sediment loads in datacage.
|
| Fri, 22 Aug 2014 17:43:36 +0200 |
Tom Gottfried |
Add SQ time interval to selection tree in datacage for sediment loads.
|
| Fri, 22 Aug 2014 13:19:02 +0200 |
Tom Gottfried |
Remove code duplications in sedimentload datacage.
|
| Fri, 22 Aug 2014 08:04:43 +0200 |
Tom Gottfried |
Format timestamps in datacage tooltip for porosities.
|
| Thu, 21 Aug 2014 18:58:10 +0200 |
Tom Gottfried |
Dashed lines shall be used for sediment load at measurement stations (issue1352).
|
| Thu, 21 Aug 2014 18:09:37 +0200 |
Tom Gottfried |
Complete mapping and themes for sediment load.
|
| Thu, 21 Aug 2014 15:48:01 +0200 |
Tom Gottfried |
Make a difference between themes representing loads in different units.
|
| Wed, 20 Aug 2014 17:54:12 +0200 |
Tom Gottfried |
i18n for sediment loads.
|
| Wed, 20 Aug 2014 17:47:58 +0200 |
Tom Gottfried |
Reconstruct facet description of sediment load longitudinal sections. i18n will follow.
|
| Wed, 20 Aug 2014 17:07:17 +0200 |
Tom Gottfried |
Reconstruct facet description of sediment load at measurement stations. i18n will follow.
|
| Wed, 20 Aug 2014 14:53:29 +0200 |
Tom Gottfried |
Let hg ignore downloaded SmartGWT stuff.
|
| Wed, 20 Aug 2014 14:26:42 +0200 |
Andre Heinecke |
Change facet.sedimentload.dc to facet.sedimentload.ls
|
| Wed, 20 Aug 2014 13:17:20 +0200 |
Andre Heinecke |
(issue1681) Add l10n for grain fractions
|
| Wed, 20 Aug 2014 13:17:03 +0200 |
Andre Heinecke |
(issue1681) Handle different grain fraction kinds
|
| Wed, 20 Aug 2014 12:59:01 +0200 |
Andre Heinecke |
Fix typo in sedimentload i18n
|
| Wed, 20 Aug 2014 12:55:55 +0200 |
Andre Heinecke |
(issue1681) Add themes for sedimentloads
|
| Wed, 20 Aug 2014 12:12:18 +0200 |
Andre Heinecke |
Remove todos about sedimentload_ls facet
|
| Wed, 20 Aug 2014 12:10:59 +0200 |
Andre Heinecke |
Remove unecessary debut output
|
| Wed, 20 Aug 2014 12:10:32 +0200 |
Andre Heinecke |
Configure SedimentLoadLSFacet
|
| Wed, 20 Aug 2014 12:09:41 +0200 |
Andre Heinecke |
Add SedimentLoadLSFacet
|
| Wed, 20 Aug 2014 12:00:50 +0200 |
Andre Heinecke |
Add getSedimentLoadById accessor
|
| Tue, 19 Aug 2014 18:46:13 +0200 |
Tom Gottfried |
Distinction by measurement station gives lots of duplicates, as we always get a whole longitudinal section.
|
| Fri, 15 Aug 2014 18:56:02 +0200 |
Andre Heinecke |
Fix binarysearch logic in SedimentLoadData
|
| Fri, 15 Aug 2014 18:42:39 +0200 |
Andre Heinecke |
Add translation for sedimentloads
|
| Fri, 15 Aug 2014 18:27:19 +0200 |
Andre Heinecke |
Add new and simplyfied SedimentLoadFacet
|
| Fri, 15 Aug 2014 18:25:43 +0200 |
Andre Heinecke |
Fix ti_stop_time naming
|
| Fri, 15 Aug 2014 18:24:55 +0200 |
Andre Heinecke |
Change sedimentload factory from yields to loads.
|
| Fri, 15 Aug 2014 18:21:10 +0200 |
Andre Heinecke |
Configure sedimentload static facet
|
| Fri, 15 Aug 2014 18:10:16 +0200 |
Andre Heinecke |
Rename the SedimentLoadDataFacet and add deprection comment
|
| Fri, 15 Aug 2014 18:09:47 +0200 |
Andre Heinecke |
Revert accidental change.
|
| Fri, 15 Aug 2014 18:09:08 +0200 |
Andre Heinecke |
Expose sedimentLoad stations
|
| Fri, 15 Aug 2014 18:03:41 +0200 |
Andre Heinecke |
merge
|
| Fri, 15 Aug 2014 14:28:26 +0200 |
Andre Heinecke |
Move the old data facet out of the way.
|
| Fri, 15 Aug 2014 18:01:06 +0200 |
Sascha L. Teichmann |
Use list() instead of iterator(). Why does this not work?
|
| Mon, 11 Aug 2014 18:34:21 +0200 |
Andre Heinecke |
Add comment on how to obtain smartgwt
|
| Mon, 11 Aug 2014 18:33:50 +0200 |
Andre Heinecke |
Do not try to load empty files.
|
| Tue, 12 Aug 2014 10:57:53 +0200 |
Sascha L. Teichmann |
Be more tolerant with not existing artifact configurations.
|
| Mon, 11 Aug 2014 17:18:36 +0200 |
Sascha L. Teichmann |
Added the broken calculation state of the new sediment load calc.
|
| Mon, 11 Aug 2014 16:45:42 +0200 |
Sascha L. Teichmann |
Removed same package import.
|
| Mon, 11 Aug 2014 16:43:56 +0200 |
Sascha L. Teichmann |
Removed obsolete import.
|
| Mon, 11 Aug 2014 16:42:31 +0200 |
Sascha L. Teichmann |
Merged
|
| Mon, 11 Aug 2014 16:41:15 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
| Mon, 11 Aug 2014 15:41:12 +0200 |
Andre Heinecke |
Build is locale sensitive. Force a UTF-8 locale for building.
|
| Fri, 08 Aug 2014 13:24:11 +0200 |
Tom Gottfried |
Datacage config for new sediment load structures. Missing: some facets and everything down from the innermost macros for sediment load at measurement stations.
|
| Thu, 07 Aug 2014 20:03:44 +0200 |
Sascha L. Teichmann |
Added $RADIUS zoom scale sub title logic to other diagrams.
|
| Thu, 07 Aug 2014 19:59:08 +0200 |
Tom Gottfried |
Some typos in datacage config reference.
|
| Thu, 07 Aug 2014 19:56:15 +0200 |
Sascha L. Teichmann |
Fixed sub title zoom stuff.
|
| Thu, 07 Aug 2014 17:26:18 +0200 |
Sascha L. Teichmann |
Merged
|
| Thu, 07 Aug 2014 17:24:33 +0200 |
Sascha L. Teichmann |
flys/issue1262: Introduce variable $RADIUS to be used in user defined chart sub titles.
|
| Thu, 07 Aug 2014 13:05:35 +0200 |
Tom Gottfried |
Cleaned layout for infolines (issue1635).
|
| Wed, 06 Aug 2014 19:17:12 +0200 |
Tom Gottfried |
SCHEMA CHANGE: rename database tables from yield to load_ls according to respective classes.
|
| Tue, 05 Aug 2014 18:28:04 +0200 |
Sascha L. Teichmann |
Parse meta data for multi attribute data.
|
| Tue, 05 Aug 2014 18:03:45 +0200 |
Sascha L. Teichmann |
Added meta infos for multi items to enable client to order the columns in a defined order.
|
| Tue, 05 Aug 2014 16:34:04 +0200 |
Sascha L. Teichmann |
More idiomatic Java string concat.
|
| Thu, 31 Jul 2014 18:14:22 +0200 |
Sascha L. Teichmann |
Sediment load: transform units for official epochs, too.
|
| Thu, 31 Jul 2014 17:04:41 +0200 |
Sascha L. Teichmann |
Sediment load: refactored epoch calculation to not average over all but per year.
|
| Wed, 30 Jul 2014 19:26:20 +0200 |
Sascha L. Teichmann |
Sediment load: fetch sediment density for transforming t/a to m^3/a.
|
| Wed, 30 Jul 2014 19:06:35 +0200 |
Sascha L. Teichmann |
Sediment load: Cached sediment values dont depend on year. The cached object is an index over year so there is not need to ask the factory for this.
|
| Wed, 30 Jul 2014 18:54:14 +0200 |
Sascha L. Teichmann |
Sediment load: Ensure that the lists of values are always ordered station wise. This was a hidden bug. :-/
|
| Wed, 30 Jul 2014 18:34:48 +0200 |
Sascha L. Teichmann |
Sediment density: Got rid of stupid extra year tracking.
|
| Wed, 30 Jul 2014 16:50:26 +0200 |
Sascha L. Teichmann |
Sedimen load: Added bundle for fraction results.
|
| Wed, 23 Jul 2014 18:19:15 +0200 |
Andre Heinecke |
Fix wsplgen name
|
| Fri, 18 Jul 2014 18:55:39 +0200 |
Sascha L. Teichmann |
Sediment load: More of official epochs.
|
| Fri, 18 Jul 2014 18:01:49 +0200 |
Tom Gottfried |
SCHEMA CHANGE and Importer: get time intervals of SQ-relations from metalines in sediment load files.
|
| Fri, 18 Jul 2014 17:43:27 +0200 |
Sascha L. Teichmann |
Sediment load: Fetch kind of sediment load from database to tell if it is official or not.
|
| Fri, 18 Jul 2014 16:05:21 +0200 |
Sascha L. Teichmann |
Sediment load: More on calculating epoch loads.
|
| Fri, 18 Jul 2014 15:37:26 +0200 |
Tom Gottfried |
Importer: Import sediment load at measurement stations.
|
| Fri, 18 Jul 2014 13:03:28 +0200 |
Sascha L. Teichmann |
Sediment load. More off year based calculations.
|
| Fri, 18 Jul 2014 12:22:51 +0200 |
Tom Gottfried |
My hint that MeasurementStation does not know it's river was not true. Thus backout rev 8c14588d1f78.
|
| Fri, 18 Jul 2014 11:58:59 +0200 |
Sascha L. Teichmann |
Sediment load: dispatch calculation modes.
|
| Fri, 18 Jul 2014 11:16:50 +0200 |
Sascha L. Teichmann |
Sediment load: take arguments from sediment access.
|
| Fri, 18 Jul 2014 11:05:34 +0200 |
Sascha L. Teichmann |
Sediment load access: Cache values.
|
| Thu, 17 Jul 2014 18:22:16 +0200 |
Sascha L. Teichmann |
Sediment load: Added more 'sums' to be calculated.
|
| Thu, 17 Jul 2014 16:51:18 +0200 |
Sascha L. Teichmann |
Sediment load: (incomplete) new sediment load calculation.
|
| Thu, 17 Jul 2014 11:37:25 +0200 |
Sascha L. Teichmann |
Sediment Load: Added table to figure out where grain fractions are measured.
|
| Thu, 17 Jul 2014 11:19:59 +0200 |
Sascha L. Teichmann |
Sediment load: Added join to fetch measurement station via ranges which know the river. Added a visitor for values, too.
|
| Thu, 17 Jul 2014 10:56:38 +0200 |
Sascha L. Teichmann |
ImporterSession: Load measurement stations via ranges which hold a reference to the river.
|
| Thu, 17 Jul 2014 07:46:18 +0200 |
Sascha L. Teichmann |
Merged.
|
| Thu, 17 Jul 2014 07:45:14 +0200 |
Sascha L. Teichmann |
Sediment load: Merge measurement stations if they have the same km. The chaining was too complicated to build algorithms on top of it.
|
| Wed, 16 Jul 2014 19:11:31 +0200 |
Tom Gottfried |
Divide SedimentLoadLSParser into AbstractSedimentLoadParser and SedimentLoadLSParser to be able to reuse code for a new SedimentLoadParser for data at measurement stations.
|
| Wed, 16 Jul 2014 18:33:28 +0200 |
Sascha L. Teichmann |
Introduce LineParserException for CSV file parsing.
|
| Wed, 16 Jul 2014 17:09:02 +0200 |
Sascha L. Teichmann |
Sediment load: Recognize grain fractions 'total', 'bed_load' and 'suspended_load' from pre-calculations.
|
| Wed, 16 Jul 2014 16:03:50 +0200 |
Sascha L. Teichmann |
Replace station list with a plain array.
|
| Wed, 16 Jul 2014 15:53:11 +0200 |
Sascha L. Teichmann |
Use GF_UNKNOWN constant instead of -1 to identify unknown grain fractions.
|
| Wed, 16 Jul 2014 13:06:09 +0200 |
Sascha L. Teichmann |
Directly chain stations with the same km position together. This ease some summations.
|
| Wed, 16 Jul 2014 11:55:46 +0200 |
Sascha L. Teichmann |
Added filters for loaded sediment data values. Year, Epochs (time ranges), And and Or.
|
| Wed, 16 Jul 2014 11:05:59 +0200 |
Sascha L. Teichmann |
Throw out old visitor model and use grain fraction filters instead. Fixed neighborhood wirinng of measument stations.
|
| Tue, 15 Jul 2014 21:31:11 +0200 |
Sascha L. Teichmann |
Sediment loads from cache are sorted in station order so range filters
|
| Tue, 15 Jul 2014 18:52:22 +0200 |
Sascha L. Teichmann |
Wire the neighbors to the measurement stations together. This eases the lookup for same types (suspended or bed load).
|
| Tue, 15 Jul 2014 12:47:52 +0200 |
Sascha L. Teichmann |
New way to loaded sediment loads from database and cache it. The data structure a way more straight forward. TODO: Implement calculation on this basis.
|
| Mon, 14 Jul 2014 15:36:44 +0200 |
Tom Gottfried |
SCHEMA CHANGE and Importer (only longitudinal section data so far): only grain fractions given now in schema are valid. We are handling sediment loads, not yields.
|
| Fri, 11 Jul 2014 13:10:05 +0200 |
Sascha L. Teichmann |
Renamed ImportSedimentYield to ImportSedimentLoadLS.
|
| Fri, 11 Jul 2014 11:32:18 +0200 |
Sascha L. Teichmann |
Fix for flys/issue1735 (Versatz in den HYK-Dateien)
|
| Thu, 10 Jul 2014 18:02:08 +0200 |
Sascha L. Teichmann |
Added method to importer session to fetch the measurement station for given (river, km).
|
| Thu, 10 Jul 2014 16:57:32 +0200 |
Sascha L. Teichmann |
Added importer models for sediment load and sediment load values.
|
| Thu, 10 Jul 2014 16:11:55 +0200 |
Sascha L. Teichmann |
Load grain fractions from database only. Do not store new ones.
|
| Thu, 10 Jul 2014 12:04:56 +0200 |
Sascha L. Teichmann |
Added Hibernate mappings for new sediment load database model.
|
| Wed, 09 Jul 2014 18:13:13 +0200 |
Sascha L. Teichmann |
Renamed SedimentYield to SedimentLoadLS and SedimentYieldValue to SedimentLoadLSValue. Adjust the names of the parsers and the rest of the glue.
|
| Wed, 09 Jul 2014 17:33:57 +0200 |
Sascha L. Teichmann |
Renamed SedimentLoad to SedimentLoadLSData to make place for SedimentLoad in backend.
|
| Wed, 09 Jul 2014 17:10:18 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
| Wed, 09 Jul 2014 16:38:29 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
| Wed, 09 Jul 2014 16:03:04 +0200 |
Sascha L. Teichmann |
Merged
|
| Wed, 09 Jul 2014 16:01:48 +0200 |
Sascha L. Teichmann |
Support the "new" HYK format which enables setting the end of the last flow zone.
|
| Wed, 09 Jul 2014 15:56:15 +0200 |
Tom Gottfried |
Repair last commit.
|
| Wed, 09 Jul 2014 15:51:31 +0200 |
Tom Gottfried |
SCHEMA CHANGE: consistent naming scheme and drop script for sediment load at measurement stations.
|
| Tue, 08 Jul 2014 19:44:54 +0200 |
Tom Gottfried |
SCHEMA CHANGE: Added new structure for sediment loads measured at measurement stations.
|
| Tue, 08 Jul 2014 18:47:40 +0200 |
Tom Gottfried |
Close branch facet-metadata. It's all in default now.
facet-metadata
|
| Tue, 08 Jul 2014 18:37:27 +0200 |
Tom Gottfried |
Merged branch facet-metadata into default.
|
| Tue, 08 Jul 2014 18:19:04 +0200 |
Tom Gottfried |
merged default into branch facet-metadata.
facet-metadata
|
| Fri, 04 Jul 2014 09:11:37 +0200 |
Raimund Renkert |
Updated german i18n strings.
facet-metadata
|
| Thu, 03 Jul 2014 17:21:22 +0200 |
Raimund Renkert |
merged.
facet-metadata
|
| Thu, 03 Jul 2014 17:20:37 +0200 |
Raimund Renkert |
Write an empty string if year is 0 in middle bedheight exporter.
facet-metadata
|
| Thu, 03 Jul 2014 17:17:28 +0200 |
Raimund Renkert |
Updated german i18n string.
facet-metadata
|
| Thu, 03 Jul 2014 16:36:43 +0200 |
Tom Gottfried |
Allow differences between years and epochs (accidentally did that in branch facet-metadata already too)
|
| Thu, 03 Jul 2014 16:34:28 +0200 |
Tom Gottfried |
Allow differences between years and epochs.
facet-metadata
|
| Thu, 03 Jul 2014 13:47:42 +0200 |
Raimund Renkert |
Fixed i18n strings.
facet-metadata
|
| Thu, 03 Jul 2014 13:27:14 +0200 |
Raimund Renkert |
Avoid NPE if some meta data does not exist.
facet-metadata
|
| Thu, 03 Jul 2014 12:31:13 +0200 |
Raimund Renkert |
Added i18n strings for middle bedheights.
facet-metadata
|
| Thu, 03 Jul 2014 12:30:41 +0200 |
Raimund Renkert |
Added macro for middle bedheights for old calculations.
facet-metadata
|
| Thu, 03 Jul 2014 11:34:46 +0200 |
Raimund Renkert |
Added i18n strings.
facet-metadata
|
| Thu, 03 Jul 2014 11:34:30 +0200 |
Raimund Renkert |
Removed unused imports and avoid using RiverUtils.
facet-metadata
|
| Thu, 03 Jul 2014 11:33:41 +0200 |
Raimund Renkert |
Fixed NPE when loading folders from datacage.
facet-metadata
|
| Thu, 03 Jul 2014 11:32:22 +0200 |
Raimund Renkert |
Translate csv meta data lines in middle bed height chart export.
facet-metadata
|
| Thu, 03 Jul 2014 11:31:26 +0200 |
Raimund Renkert |
Add river elevation model to middle bed height csv export.
facet-metadata
|
| Thu, 03 Jul 2014 11:30:19 +0200 |
Raimund Renkert |
Fixed i18n strings.
facet-metadata
|
| Thu, 03 Jul 2014 11:27:41 +0200 |
Raimund Renkert |
Add river elevation model to bed diff chart export.
facet-metadata
|
| Wed, 02 Jul 2014 16:35:23 +0200 |
Tom Gottfried |
Allow building Release from specific branch. Beware that branches to not get different ports automatically.
|
| Wed, 02 Jul 2014 15:54:23 +0200 |
Raimund Renkert |
Added missing facet.
facet-metadata
|
| Wed, 02 Jul 2014 14:42:43 +0200 |
Raimund Renkert |
Add meta data to middle bed height CSV export.
facet-metadata
|
| Wed, 02 Jul 2014 14:42:07 +0200 |
Raimund Renkert |
Added som more meta data to middle bed height result.
facet-metadata
|
| Wed, 02 Jul 2014 12:34:52 +0200 |
Raimund Renkert |
Separate meta data key and value by ':'.
facet-metadata
|
| Wed, 02 Jul 2014 12:34:06 +0200 |
Raimund Renkert |
Removed unused importsRemoved unused imports..
facet-metadata
|
| Wed, 02 Jul 2014 12:33:43 +0200 |
Raimund Renkert |
Add meta data to chart series in sq relation.
facet-metadata
|
| Wed, 02 Jul 2014 12:32:59 +0200 |
Raimund Renkert |
Add units as meta data to middle bed height facets.
facet-metadata
|
| Wed, 02 Jul 2014 12:31:57 +0200 |
Raimund Renkert |
Updated meta data in facets.
facet-metadata
|
| Wed, 02 Jul 2014 09:31:14 +0200 |
Raimund Renkert |
Split bed quality facets and updated processors and state.
facet-metadata
|
| Wed, 02 Jul 2014 09:29:39 +0200 |
Raimund Renkert |
Removed debug output.
facet-metadata
|
| Tue, 01 Jul 2014 15:09:56 +0200 |
Raimund Renkert |
Split bed differences facet into data specific facets.
facet-metadata
|
| Tue, 01 Jul 2014 13:27:53 +0200 |
Raimund Renkert |
Bedheight facet now returns double[][]. Removed obsolete processor code.
facet-metadata
|
| Tue, 01 Jul 2014 13:25:46 +0200 |
Raimund Renkert |
Moved MiddleBedHeight classes to minfo package. Facet now returns double[][] data.
facet-metadata
|
| Tue, 01 Jul 2014 13:11:43 +0200 |
Raimund Renkert |
Fixed some smartgwt 4.1 related issues.
|
| Mon, 30 Jun 2014 11:29:45 +0200 |
Raimund Renkert |
merged with default.
facet-metadata
|
| Fri, 27 Jun 2014 19:28:08 +0200 |
Tom Gottfried |
Added tag 3.1.4 for changeset 6fef38a526c7
|
| Fri, 27 Jun 2014 19:25:29 +0200 |
Tom Gottfried |
There is no year/epoche choice anymore for bed differences.
3.1.4
|
| Fri, 27 Jun 2014 18:47:55 +0200 |
Tom Gottfried |
Exclude annotation types without trailing unit (assumed after whitespace).
|
| Fri, 27 Jun 2014 16:52:00 +0200 |
Sascha L. Teichmann |
Removed obsolete XPath expression.
|
| Fri, 27 Jun 2014 15:52:05 +0200 |
Tom Gottfried |
Minor cleanup in meta-data.xml.
|
| Fri, 27 Jun 2014 15:10:10 +0200 |
Raimund Renkert |
Select complete differences matrix to have a well sorted dc-tree.
|
| Fri, 27 Jun 2014 13:05:34 +0200 |
Raimund Renkert |
Removed code that ignores a user subtitle and sets a default subtitle.
|
| Fri, 27 Jun 2014 09:50:46 +0200 |
Raimund Renkert |
Fixed datacage info field for bed height differences.
|
| Thu, 26 Jun 2014 15:00:28 +0200 |
Raimund Renkert |
merged.
|
| Thu, 26 Jun 2014 14:59:28 +0200 |
Raimund Renkert |
Changed twin dc panel in bed height deifferences to single dc and use the new differences dc macro.
|
| Thu, 26 Jun 2014 14:54:04 +0200 |
Raimund Renkert |
Updated macros and db statement for minfo bedheight differences.
|
| Thu, 26 Jun 2014 13:00:18 +0200 |
Sascha L. Teichmann |
Datacage function resolver: Declare static functions static.
|
| Thu, 26 Jun 2014 12:54:31 +0200 |
Sascha L. Teichmann |
Added dc:coalesce(a, b). Returns first element which is not empty or not zero.
|
| Thu, 26 Jun 2014 12:44:40 +0200 |
Sascha L. Teichmann |
Added dc:lowercase() dc:uppercase()
|
| Wed, 25 Jun 2014 15:40:44 +0200 |
Raimund Renkert |
Set identifier for listgridfields and resized columns.
|
| Tue, 24 Jun 2014 16:02:41 +0200 |
Tom Gottfried |
issue1633: Add missing info line.
|
| Fri, 20 Jun 2014 16:52:14 +0200 |
Sascha L. Teichmann |
DC: Flatten bed height diff tree a bit.
|
| Fri, 20 Jun 2014 16:41:30 +0200 |
Sascha L. Teichmann |
DC: Group bedheight diffs by both years.
|
| Fri, 20 Jun 2014 16:33:36 +0200 |
Raimund Renkert |
merged.
|
| Fri, 20 Jun 2014 16:33:09 +0200 |
Raimund Renkert |
New macros for bed height differneces.
|
| Fri, 20 Jun 2014 16:26:26 +0200 |
Sascha L. Teichmann |
Datacage: Make it possible to group a value tuple into more than one group.
|
| Fri, 20 Jun 2014 13:45:54 +0200 |
Raimund Renkert |
Fixed river selection for interactive map.
|
| Fri, 20 Jun 2014 12:51:08 +0200 |
Tom Gottfried |
i18n for WMS legend window title.
|
| Thu, 19 Jun 2014 18:20:39 +0200 |
Sascha L. Teichmann |
Added script to find unused i18n in *.java and *.xml files.
|
| Thu, 19 Jun 2014 15:07:15 +0200 |
Sascha L. Teichmann |
Fixed last anomalie in i18n files.
|
| Thu, 19 Jun 2014 15:02:41 +0200 |
Sascha L. Teichmann |
Removed more anomalies from i18n.
|
| Thu, 19 Jun 2014 14:48:11 +0200 |
Sascha L. Teichmann |
Run native2ascii over i18n files.
|
| Thu, 19 Jun 2014 13:54:02 +0200 |
Tom Gottfried |
Fixed i18n string in other german translation.
|
| Thu, 19 Jun 2014 13:36:40 +0200 |
Raimund Renkert |
Fixed i18n string in german translation.
|
| Thu, 19 Jun 2014 11:06:12 +0200 |
Tom Gottfried |
This additional version of JFreeChart prevented diagrams to be drawn.
|
| Wed, 18 Jun 2014 18:49:50 +0200 |
Tom Gottfried |
Remove obsolete generator references.
|
| Wed, 18 Jun 2014 18:18:04 +0200 |
Tom Gottfried |
Avoid having to set VERSION in external script.
|
| Wed, 18 Jun 2014 16:34:08 +0200 |
Tom Gottfried |
Override bad defaults of isc-maven-plugin. Please set DEFAULT_WD in make_release_sh to something individual if you are on a multi-user system.
|
| Wed, 18 Jun 2014 15:30:39 +0200 |
Sascha L. Teichmann |
Datacage: Moved year filtering of bed heights to separate macro to be reusable in other contextes.
|
| Wed, 18 Jun 2014 15:20:07 +0200 |
Tom Gottfried |
Use version-specific mapserver-URLs for release.
|
| Wed, 18 Jun 2014 14:29:05 +0200 |
Raimund Renkert |
merged.
|
| Wed, 18 Jun 2014 14:27:56 +0200 |
Raimund Renkert |
Fixed sediment load epoch input panel.
|
| Wed, 18 Jun 2014 14:27:17 +0200 |
Raimund Renkert |
Fixed "pegelinfo"-wiki links.
|
| Wed, 18 Jun 2014 14:26:36 +0200 |
Raimund Renkert |
Fixed date range input panels.
|
| Wed, 18 Jun 2014 14:25:46 +0200 |
Raimund Renkert |
Fixed columns in location/distance helper panels.
|
| Wed, 18 Jun 2014 14:25:01 +0200 |
Raimund Renkert |
Fixed compile errors for smartgwt 4.1.
|
| Wed, 18 Jun 2014 14:23:25 +0200 |
Raimund Renkert |
Use SmartGWT version 4.1p. Updated release script to download SmartGWT.
|
| Wed, 18 Jun 2014 12:32:24 +0200 |
Tom Gottfried |
Importer: document import of UUIDs.
|
| Tue, 17 Jun 2014 17:57:25 +0200 |
Tom Gottfried |
issue1633: Add info lines in SQ-relation CSV export.
|
| Tue, 17 Jun 2014 17:50:59 +0200 |
Tom Gottfried |
So you do not need to type every string twice.
|
| Tue, 17 Jun 2014 09:54:40 +0200 |
Raimund Renkert |
Removed unnecessary container widgets and layouts.
|
| Tue, 17 Jun 2014 09:47:45 +0200 |
Raimund Renkert |
Moved info stack section to top level widget (parameterlist).
|
| Tue, 17 Jun 2014 09:45:48 +0200 |
Raimund Renkert |
Replaced plain gwt with smartgwt components in info panels.
|
| Fri, 13 Jun 2014 16:34:29 +0200 |
Tom Gottfried |
Add unit for Q in SQ relation exports.
|
| Thu, 12 Jun 2014 19:43:02 +0200 |
Tom Gottfried |
Include last year of epoch in calculation.
|
| Thu, 12 Jun 2014 19:16:30 +0200 |
Sascha L. Teichmann |
Small Java related cosmetics.
|
| Thu, 12 Jun 2014 12:29:03 +0200 |
Tom Gottfried |
Nasty little detail overlooked in last commit.
|
| Thu, 12 Jun 2014 12:26:05 +0200 |
Tom Gottfried |
This guess was not always correct.
|
| Thu, 12 Jun 2014 12:21:55 +0200 |
Tom Gottfried |
Add new DateUtil class.
|
| Tue, 10 Jun 2014 15:27:31 +0200 |
Tom Gottfried |
Complete rev7925.
|
| Tue, 10 Jun 2014 15:23:40 +0200 |
Tom Gottfried |
Importer: remove system property and documentation for bed height epochs.
|
| Tue, 10 Jun 2014 15:11:36 +0200 |
Tom Gottfried |
SCHEMA CHANGE: Removed bed height epochs.
|
| Tue, 10 Jun 2014 12:51:08 +0200 |
Raimund Renkert |
Removed bed differences epoch from datacage.
|
| Fri, 06 Jun 2014 17:02:03 +0200 |
Raimund Renkert |
Removed datacage macro calls for bed height epochs.
|
| Fri, 06 Jun 2014 17:00:56 +0200 |
Raimund Renkert |
Removed clientside filter for bed height epochs.
|
| Fri, 06 Jun 2014 17:00:01 +0200 |
Raimund Renkert |
Removed obsolete bed height epoch files.
|
| Fri, 06 Jun 2014 16:59:16 +0200 |
Raimund Renkert |
Removed serverside path for bed height epochs.
|
| Fri, 06 Jun 2014 16:47:48 +0200 |
Raimund Renkert |
Removed bed height epoch in importer.
|
| Thu, 05 Jun 2014 15:32:52 +0200 |
Tom Gottfried |
Make grain fraction type 'unknown' explicit and use it where appropriate.
|
| Wed, 04 Jun 2014 18:22:14 +0200 |
Tom Gottfried |
Adapted bed differences PDF export to CSV export and some cleanup of field names.
|
| Wed, 04 Jun 2014 15:34:22 +0200 |
Sascha L. Teichmann |
flys/issue1628: Adjusted the PDF export.
|
| Wed, 04 Jun 2014 13:06:52 +0200 |
Tom Gottfried |
Change column order in bed differences export.
|
| Wed, 04 Jun 2014 12:53:28 +0200 |
Sascha L. Teichmann |
Added diff pair column to CSV export of bed height differences. TODO: same for PDF, adjust client.
|
| Wed, 04 Jun 2014 12:22:01 +0200 |
Tom Gottfried |
Allow differentiating between units of sediment sources/sinks in annotation types also in datacage.
|
| Wed, 04 Jun 2014 11:16:52 +0200 |
Tom Gottfried |
Annotations are not points.
|
| Wed, 04 Jun 2014 10:55:04 +0200 |
Sascha L. Teichmann |
Added text color for annotation labels.
|
| Tue, 03 Jun 2014 17:57:07 +0200 |
Sascha L. Teichmann |
Feed unit to PDF template.
|
| Tue, 03 Jun 2014 15:42:49 +0200 |
Sascha L. Teichmann |
Fixed flys/issue1628. Made "unit" a configurable field in PDF export.
|
| Sun, 01 Jun 2014 08:26:37 +0200 |
Sascha L. Teichmann |
Fixed typos in datacage manual.
|
| Fri, 30 May 2014 16:56:40 +0200 |
Tom Gottfried |
issue1628: correct unit and at least partly complete column name for CSV.
|
| Fri, 30 May 2014 15:46:53 +0200 |
Tom Gottfried |
issue661: prototyped tooltip for porosities in datacage.
|
| Wed, 28 May 2014 12:26:13 +0200 |
Sascha L. Teichmann |
Potential fix for exception reported in flys/issue1717.
|
| Tue, 27 May 2014 19:56:13 +0200 |
Tom Gottfried |
Upgrade to SmartGWT 3.1 (bugfix Release) as this did at least not seem to cause any problems.
|
| Mon, 26 May 2014 17:00:28 +0200 |
Sascha L. Teichmann |
Potential fix for flys/issue1717: Draw manuel points on W or Q axis depending on the calculation.
|
| Mon, 26 May 2014 12:40:19 +0200 |
Sascha L. Teichmann |
Fix for flys/issue1670: Introduce 100m gaps in single bed width.
|
| Wed, 21 May 2014 17:26:12 +0200 |
Sascha L. Teichmann |
Added tag 3.1.3 for changeset 8333b9b06c98
|
| Wed, 21 May 2014 17:03:02 +0200 |
Raimund Renkert |
Return NaN for width if no width exists for the requested station in bedheights data.
3.1.3
|
| Wed, 21 May 2014 13:22:44 +0200 |
Raimund Renkert |
Added tag 3.1.3 for changeset e0d06f4edaa6
|
| Wed, 21 May 2014 13:22:31 +0200 |
Raimund Renkert |
Removed tag 3.1.13
|
| Wed, 21 May 2014 12:08:14 +0200 |
Raimund Renkert |
Added tag 3.1.13 for changeset 9d5385ccad07
|
| Wed, 21 May 2014 11:44:58 +0200 |
Sascha L. Teichmann |
Use old version of iReport to generate binary compatible version of the PDF S/Q template.
|
| Wed, 21 May 2014 11:43:10 +0200 |
Raimund Renkert |
Added metadata to facets.
facet-metadata
|
| Wed, 21 May 2014 11:41:06 +0200 |
Raimund Renkert |
Use the metadata to write csv header when exporting a chart.
facet-metadata
|
| Wed, 21 May 2014 11:40:14 +0200 |
Raimund Renkert |
Add metadata to chart series and datasets.
facet-metadata
|
| Wed, 21 May 2014 11:36:21 +0200 |
Raimund Renkert |
Added metadata to styled series.
facet-metadata
|
| Wed, 21 May 2014 11:35:09 +0200 |
Raimund Renkert |
New class and interface for metadata in chart series and datasets.
facet-metadata
|
| Wed, 21 May 2014 11:25:05 +0200 |
Sascha L. Teichmann |
Fix flys/issue1719: s@Abflusskurve/-tafel@Modell-Abflusskurve/-tafel@
|
| Mon, 19 May 2014 12:47:50 +0200 |
Raimund Renkert |
Use the new way of building static facets if such facets exist else ignore this way.
|
| Fri, 16 May 2014 18:50:56 +0200 |
Tom Gottfried |
Added tag 3.1.3 for changeset 952b57b43e2f
|
| Fri, 16 May 2014 17:51:55 +0200 |
Tom Gottfried |
Importer: depths are always numbers assumed to represent centimeters.
|
| Fri, 16 May 2014 17:12:36 +0200 |
Sascha L. Teichmann |
Removed trailing whitespace.
|
| Fri, 16 May 2014 17:11:12 +0200 |
Sascha L. Teichmann |
Removed trailing whitespace.
|
| Fri, 16 May 2014 17:10:10 +0200 |
Sascha L. Teichmann |
Removed trailing whitespace.
|
| Fri, 16 May 2014 14:57:46 +0200 |
Tom Gottfried |
Add porosity importer to helper script.
|
| Fri, 16 May 2014 13:17:29 +0200 |
Raimund Renkert |
Use description from database for i18n (completed revision dc8910e29dd4).
|
| Fri, 16 May 2014 13:14:52 +0200 |
Tom Gottfried |
PorosityParser: Strip file extension for description.
|
| Fri, 16 May 2014 12:26:11 +0200 |
Tom Gottfried |
Number an unit have to separated by whitespace.
|
| Fri, 16 May 2014 12:11:31 +0200 |
Tom Gottfried |
i18n for porosities (needs to be filled with data).
|
| Fri, 16 May 2014 10:55:59 +0200 |
Raimund Renkert |
Fixed subtitle handling and added flowvelocity subtitle.
|
| Fri, 16 May 2014 09:32:51 +0200 |
Raimund Renkert |
merged.
|
| Fri, 16 May 2014 09:32:19 +0200 |
Raimund Renkert |
Changed column names in sounding select state ui.
|
| Thu, 15 May 2014 17:19:55 +0200 |
Sascha L. Teichmann |
flys/issue1716: Adjusted installation from binaries.
|
| Thu, 15 May 2014 11:56:10 +0200 |
Sascha L. Teichmann |
Issue1308 Forgot to rename columns.
|
| Wed, 14 May 2014 16:58:07 +0200 |
Tom Gottfried |
Corrected wording for moving average.
|
| Wed, 14 May 2014 10:11:16 +0200 |
Raimund Renkert |
Added importer documentation for porosity data.
|
| Wed, 14 May 2014 10:07:35 +0200 |
Raimund Renkert |
Backed out changeset 0c88a5d30ca2
facet-metadata
|
| Wed, 14 May 2014 09:59:47 +0200 |
Raimund Renkert |
Added importer documentation for porosity data.
facet-metadata
|
| Tue, 13 May 2014 17:27:14 +0200 |
Raimund Renkert |
merged.
|
| Tue, 13 May 2014 17:07:26 +0200 |
Raimund Renkert |
Removed step back button for river selection. Fix/Workarround for issue 1203/1714.
|
| Tue, 13 May 2014 10:30:00 +0200 |
Tom Gottfried |
Precision and scale have to be set to represent integers with NUMBER; DOUBLE PRECISION is preferable for floating point (see issue1304).
|
| Thu, 08 May 2014 15:26:32 +0200 |
Sascha L. Teichmann |
Removed obsolete import.
|
| Thu, 08 May 2014 13:52:47 +0200 |
Raimund Renkert |
merged.
|
| Thu, 08 May 2014 13:52:20 +0200 |
Raimund Renkert |
Updated oracle minfo schema (added porosity).
|
| Thu, 08 May 2014 13:48:45 +0200 |
Raimund Renkert |
Fixed porosity importer. Find existing db entries and parse values from string, not via double.
|
| Thu, 08 May 2014 13:46:32 +0200 |
Raimund Renkert |
Fixed getPeer for depth. Select with a small epsilon, not extact match.
|
| Thu, 08 May 2014 13:45:23 +0200 |
Raimund Renkert |
Order porosities by station.
|
| Tue, 06 May 2014 17:24:59 +0200 |
Sascha L. Teichmann |
Fixes flys/issue1308. Add new column "Messstellenart" in "Messstellen-Info".
|
| Tue, 06 May 2014 16:12:34 +0200 |
Sascha L. Teichmann |
Preparation for flys/issue1643: Introduced four new annotation types:
|
| Tue, 06 May 2014 15:44:44 +0200 |
Sascha L. Teichmann |
Fixed some whitespace in annotation classifier xml.
|
| Mon, 05 May 2014 12:40:13 +0200 |
Sascha L. Teichmann |
Fix for flys/issue1635: Added legend for table. TODO: Adjust english template. BTW: Who threw the original templates away?
|
| Wed, 30 Apr 2014 17:23:28 +0200 |
Sascha L. Teichmann |
Fixed imports and make it build again.
|
| Wed, 30 Apr 2014 17:16:57 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
| Wed, 30 Apr 2014 15:29:50 +0200 |
Raimund Renkert |
merged.
|
| Wed, 30 Apr 2014 15:28:04 +0200 |
Raimund Renkert |
Added cache key class for porosity.
|
| Wed, 30 Apr 2014 15:26:44 +0200 |
Raimund Renkert |
New macro for porosities in datacage config.
|
| Wed, 30 Apr 2014 15:25:50 +0200 |
Raimund Renkert |
Added porosity facet to minfo artifact config.
|
| Wed, 30 Apr 2014 15:25:06 +0200 |
Raimund Renkert |
Added config for porosity artifact.
|
| Wed, 30 Apr 2014 15:22:27 +0200 |
Raimund Renkert |
Handle porosity facets in a processor.
|
| Wed, 30 Apr 2014 15:20:41 +0200 |
Raimund Renkert |
Added new facet to facettypes.
|
| Wed, 30 Apr 2014 15:20:11 +0200 |
Raimund Renkert |
New Facet, datatype and data factory for porosities.
|
| Wed, 30 Apr 2014 15:17:54 +0200 |
Raimund Renkert |
Build static facets in D4EArtifact.
|
| Wed, 30 Apr 2014 15:16:42 +0200 |
Raimund Renkert |
Removed name and getter for name (Moved to DefaultArtifact).
|
| Wed, 30 Apr 2014 15:15:35 +0200 |
Raimund Renkert |
D4EArtifact is no longer abstract.
|
| Wed, 30 Apr 2014 15:12:32 +0200 |
Raimund Renkert |
Updated signature of artifacts setup method; Removed unnecessary setup overrides.
|
| Wed, 30 Apr 2014 14:12:59 +0200 |
Raimund Renkert |
Parse and import porosities.
|
| Wed, 30 Apr 2014 14:11:29 +0200 |
Raimund Renkert |
Added model, parser and importer for porosities.
|
| Wed, 30 Apr 2014 14:09:53 +0200 |
Raimund Renkert |
Added tables for porosity and porosity values to postgres schema.
|
| Fri, 25 Apr 2014 15:46:06 +0200 |
Sascha L. Teichmann |
Bring date format on par with server format. Hopefully fixes flys/issue1445.
|
| Thu, 17 Apr 2014 17:06:15 +0200 |
Tom Gottfried |
Use correct URL from config files in release script.
|
| Thu, 17 Apr 2014 11:45:23 +0200 |
Tom Gottfried |
Close branch minfo-opt as it is now merged to default.
minfo-opt
|
| Thu, 17 Apr 2014 11:42:12 +0200 |
Tom Gottfried |
Merged minfo-opt branch into default.
|
| Thu, 03 Apr 2014 14:10:53 +0200 |
Raimund Renkert |
Draw lines with gaps for sounding width, and bed heights.
minfo-opt
|
| Thu, 03 Apr 2014 14:01:01 +0200 |
Raimund Renkert |
Avoid NPE in sounding select state if no year is set for bed heights.
minfo-opt
|
| Fri, 28 Mar 2014 11:22:55 +0100 |
Raimund Renkert |
Added i18n stings for morph active width.
minfo-opt
|
| Fri, 28 Mar 2014 11:22:18 +0100 |
Raimund Renkert |
Added new columns for morph active width.
minfo-opt
|
| Fri, 28 Mar 2014 11:21:49 +0100 |
Raimund Renkert |
Add new facet for morph active width to bed height difference calculation.
minfo-opt
|
| Fri, 28 Mar 2014 11:20:49 +0100 |
Raimund Renkert |
Added morph. active width to bed height difference calculation.
minfo-opt
|
| Thu, 27 Mar 2014 14:56:34 +0100 |
Raimund Renkert |
Renamed the incorrectly named morph width to sounding width.
minfo-opt
|
| Thu, 27 Mar 2014 11:21:31 +0100 |
Sascha L. Teichmann |
Added GNU Affero General Public License text to DiveElements/River.
|
| Thu, 20 Mar 2014 13:36:59 +0100 |
Raimund Renkert |
Display the additional information extracted from multiattribute data.
minfo-opt
|
| Thu, 20 Mar 2014 13:36:20 +0100 |
Raimund Renkert |
Added the new multiattribute data type.
minfo-opt
|
| Thu, 20 Mar 2014 13:35:45 +0100 |
Raimund Renkert |
New method to extract multi attribute data.
minfo-opt
|
| Thu, 20 Mar 2014 13:35:13 +0100 |
Raimund Renkert |
Add additional data in soundigs select state.
minfo-opt
|
| Thu, 20 Mar 2014 13:34:05 +0100 |
Raimund Renkert |
Changed state datatype for soundings select state.
minfo-opt
|
| Thu, 20 Mar 2014 13:32:43 +0100 |
Raimund Renkert |
Added new state data type.
minfo-opt
|
| Wed, 19 Mar 2014 15:08:44 +0100 |
Raimund Renkert |
Fixed WSPLGEN classes. Allow 0 for 'to' in differences.
|
| Wed, 12 Mar 2014 11:16:45 +0100 |
Raimund Renkert |
Use the sediment yield kind to get data to avoid mixing epoch with off. epoch data.
minfo-opt
|
| Tue, 18 Mar 2014 18:07:27 +0100 |
Tom Gottfried |
Mention DIPS field-names in ETL-README.
|
| Mon, 17 Mar 2014 12:51:41 +0100 |
Tom Gottfried |
Use new OSM-WMS.
|
| Mon, 17 Mar 2014 10:30:39 +0100 |
Tom Gottfried |
Release script broke with r7814:242e790fb4ee.
|
| Fri, 07 Mar 2014 18:40:31 +0100 |
Sascha L. Teichmann |
Added tag 3.1.2 for changeset 242e790fb4ee
|
| Fri, 07 Mar 2014 18:38:35 +0100 |
Sascha L. Teichmann |
More fixes for the Free Software installation.
3.1.2
|
| Fri, 07 Mar 2014 17:14:35 +0100 |
Raimund Renkert |
Replace model uuid of 'Beispielfluss' with model_uuid of 'Elbe'.
|
| Fri, 07 Mar 2014 16:28:23 +0100 |
Raimund Renkert |
Added apache example config, updated install doku.
|
| Fri, 07 Mar 2014 16:26:44 +0100 |
Raimund Renkert |
Added images and html references for inactive rivers: Rhein, Oder.
|
| Fri, 07 Mar 2014 16:25:47 +0100 |
Raimund Renkert |
Changed model uuid of 'Elbe' to model uuid of 'Beispielfluss'.
|
| Fri, 07 Mar 2014 11:16:24 +0100 |
Raimund Renkert |
Added i18n strings for chart subtitle.
minfo-opt
|
| Fri, 07 Mar 2014 11:15:38 +0100 |
Raimund Renkert |
Calculate the zoom dependent radius and add the informations to chart subtitle.
minfo-opt
|
| Fri, 07 Mar 2014 11:12:59 +0100 |
Raimund Renkert |
Concatenate the subtitle parts and add them to the default subtitle.
minfo-opt
|
| Fri, 07 Mar 2014 11:11:11 +0100 |
Raimund Renkert |
Added subtitle parts to modify the chart subtitle via the outprocessor.
minfo-opt
|
| Fri, 07 Mar 2014 11:09:46 +0100 |
Raimund Renkert |
Use the updated default subtitle or the 'old' one from chart settings.
minfo-opt
|
| Thu, 06 Mar 2014 18:45:40 +0100 |
Tom Gottfried |
Add extra config files for modules and zoom scales and give option to use custom files for release.
|
| Thu, 06 Mar 2014 18:19:01 +0100 |
Tom Gottfried |
INSTALL_DE: use useradd with defaults.
|
| Thu, 06 Mar 2014 18:08:04 +0100 |
Tom Gottfried |
INSTALL_DE: more small improvements and corrections.
|
| Thu, 06 Mar 2014 17:30:59 +0100 |
Tom Gottfried |
Remove not publicly available WMS services and enable custom configuration through release script.
|
| Thu, 06 Mar 2014 16:43:49 +0100 |
Tom Gottfried |
Remove obsolete MapServer stuff.
|
| Thu, 06 Mar 2014 16:42:35 +0100 |
Tom Gottfried |
Remove obsolete WSPLGEN binary.
|
| Thu, 06 Mar 2014 16:39:12 +0100 |
Tom Gottfried |
Ignore python byte code.
|
| Thu, 06 Mar 2014 16:38:45 +0100 |
Tom Gottfried |
Use latest WSPLGEN binary.
|
| Thu, 06 Mar 2014 14:10:24 +0100 |
Raimund Renkert |
Added i18n strings for winfo difference facet names.
minfo-opt
|
| Thu, 06 Mar 2014 14:10:00 +0100 |
Raimund Renkert |
Fixed datacage macro for winfo differences and added the new facet.
minfo-opt
|
| Thu, 06 Mar 2014 14:09:10 +0100 |
Raimund Renkert |
Mapped a theme for the new differences facet.
minfo-opt
|
| Thu, 06 Mar 2014 14:08:37 +0100 |
Raimund Renkert |
Add the new facet to drawable facets.
minfo-opt
|
| Thu, 06 Mar 2014 14:07:24 +0100 |
Raimund Renkert |
Add the new difference facet and set facets active/inactive.
minfo-opt
|
| Thu, 06 Mar 2014 14:04:46 +0100 |
Raimund Renkert |
Added new facet for filtered winfo differences.
minfo-opt
|
| Thu, 06 Mar 2014 14:03:10 +0100 |
Raimund Renkert |
Added default zoom scales.
minfo-opt
|
| Thu, 06 Mar 2014 14:02:36 +0100 |
Raimund Renkert |
Try to load default zoom scales if no zoom scale defined for the current river.
minfo-opt
|
| Wed, 05 Mar 2014 19:47:54 +0100 |
Tom Gottfried |
INSTALL_DE: more small improvements and corrections.
|
| Wed, 05 Mar 2014 19:33:55 +0100 |
Tom Gottfried |
Set useful DB connection configuration for demo installation.
|
| Wed, 05 Mar 2014 17:52:19 +0100 |
Tom Gottfried |
INSTALL_DE: small corrections and (hopefully) improvements.
|
| Wed, 05 Mar 2014 17:51:23 +0100 |
Tom Gottfried |
INSTALL_DE: we don't want links to internalt sites and to build WSPLGEN
|
| Wed, 05 Mar 2014 17:47:14 +0100 |
Tom Gottfried |
INSTALL_DE: install Java 7 prior to tomcat to avoid Java 6 installation.
|
| Wed, 05 Mar 2014 15:53:46 +0100 |
Tom Gottfried |
Useful server-logging for demo installation.
|
| Tue, 04 Mar 2014 19:24:10 +0100 |
Tom Gottfried |
Set appropriate client log-file for demo installation.
|
| Tue, 04 Mar 2014 19:14:15 +0100 |
Tom Gottfried |
INSTALL_DE: remove obsolete server configuration.
|
| Tue, 04 Mar 2014 19:08:02 +0100 |
Tom Gottfried |
Remove FLYS-specific stuff from map configuration and allow to give a custom files in release script.
|
| Tue, 04 Mar 2014 18:40:00 +0100 |
Tom Gottfried |
INSTALL_DE: remove obsolete client configuration.
|
| Tue, 04 Mar 2014 18:34:24 +0100 |
Tom Gottfried |
Remove FLYS-specific stuff from config.yaml and allow to give a custom file in release script.
|
| Tue, 04 Mar 2014 17:58:10 +0100 |
Tom Gottfried |
Set print URL to useful value for demo installation.
|
| Tue, 04 Mar 2014 17:42:31 +0100 |
Tom Gottfried |
INSTALL_DE: mention tested system and simplify dependency installation.
|
| Tue, 04 Mar 2014 17:19:48 +0100 |
Tom Gottfried |
Defaulting to GGinA authentication in release script instead of client sources.
|
| Tue, 04 Mar 2014 15:23:50 +0100 |
Tom Gottfried |
Replace FLYS-specific features.xml.
|
| Mon, 03 Mar 2014 15:40:25 +0100 |
Raimund Renkert |
merged.
|
| Mon, 03 Mar 2014 15:39:35 +0100 |
Raimund Renkert |
Validate waterlevel 'to' value on change.
|
| Mon, 03 Mar 2014 12:27:04 +0100 |
Andre Heinecke |
Change to work dir bevor creating artifacts and datacage db
|
| Mon, 03 Mar 2014 11:46:45 +0100 |
Raimund Renkert |
merged.
|
| Mon, 03 Mar 2014 11:46:09 +0100 |
Raimund Renkert |
Added german INSTALL.
|
| Mon, 03 Mar 2014 11:44:56 +0100 |
Raimund Renkert |
Changed directory variable in h2 create scripts.
|
| Thu, 27 Feb 2014 18:09:39 +0100 |
Sascha L. Teichmann |
Removed obsolete imports.
|
| Thu, 27 Feb 2014 16:45:36 +0100 |
Raimund Renkert |
merged.
|
| Thu, 27 Feb 2014 16:43:24 +0100 |
Raimund Renkert |
Replaced river names with model_uuid for available rivers.
|
| Thu, 27 Feb 2014 16:42:35 +0100 |
Raimund Renkert |
Use river model_uuid to identify rivers.
|
| Thu, 27 Feb 2014 16:41:47 +0100 |
Raimund Renkert |
Replaced hard coded rivers with rivers loaded from module service.
|
| Thu, 27 Feb 2014 16:40:33 +0100 |
Raimund Renkert |
Use the river model_uuid as value for data items.
|
| Thu, 27 Feb 2014 16:38:45 +0100 |
Raimund Renkert |
Load modules with supported rivers and rivers with model_uuid.
|
| Thu, 27 Feb 2014 15:11:59 +0100 |
Raimund Renkert |
Added list to module to store supported rivers.
|
| Thu, 27 Feb 2014 15:10:44 +0100 |
Raimund Renkert |
Added model_uuid to river info.
|
| Thu, 27 Feb 2014 15:10:04 +0100 |
Raimund Renkert |
Added model_uuid to river model.
|
| Thu, 27 Feb 2014 15:00:09 +0100 |
Raimund Renkert |
Added rivers to each module.
|
| Thu, 27 Feb 2014 14:56:36 +0100 |
Raimund Renkert |
Read rivers supported by a module from config file.
|
| Thu, 27 Feb 2014 14:55:38 +0100 |
Raimund Renkert |
Added list of rivers a module supports.
|
| Thu, 27 Feb 2014 14:51:35 +0100 |
Raimund Renkert |
Replaced river name with model_uuid as value in RiverSelect state.
|
| Thu, 27 Feb 2014 14:49:58 +0100 |
Raimund Renkert |
Include river model_uuid in RiverService.
|
| Thu, 27 Feb 2014 14:48:59 +0100 |
Raimund Renkert |
Include river model_uuid in RiverInfoService.
|
| Thu, 27 Feb 2014 14:46:30 +0100 |
Raimund Renkert |
Parse and import model_uuid for rivers.
|
| Thu, 27 Feb 2014 14:45:22 +0100 |
Raimund Renkert |
Added model_uuid column to river model.
|
| Mon, 24 Feb 2014 18:55:14 +0100 |
Andre Heinecke |
Add german howto to describe how to set up putty / wald and mercurial on windows
|
| Fri, 21 Feb 2014 15:28:08 +0100 |
Sascha L. Teichmann |
Hopefully a cleaner fix for flys/issue1549 using the FloatRangeValidator from SmartGWT to verify that the 'to' field stays positive.
|
| Tue, 11 Feb 2014 16:18:57 +0100 |
Felix Wolfsteller |
Partial fix issue1532: at least clone artifacts data when cloning
|
| Tue, 11 Feb 2014 16:18:11 +0100 |
Felix Wolfsteller |
Upcoming issue1532: Extracted method where 'cloning/initialize' takes place.
|
| Tue, 11 Feb 2014 12:37:16 +0100 |
Felix Wolfsteller |
issue1549: Add live-validation to wsplgen to-field.
|
| Fri, 07 Feb 2014 15:48:43 +0100 |
Felix Wolfsteller |
issue765: When creating a WMSLayerFacet copy, also copy original
|
| Fri, 07 Feb 2014 10:54:03 +0100 |
Tom Gottfried |
Schema correction following yesterday's brain failure.
|
| Thu, 06 Feb 2014 15:05:29 +0100 |
Tom Gottfried |
merged
|
| Thu, 06 Feb 2014 15:04:29 +0100 |
Tom Gottfried |
SCHEMA CHANGE: renamed uuid-column to avoid collision with data type.
|
| Thu, 06 Feb 2014 14:47:29 +0100 |
Felix Wolfsteller |
Implement deepCopy on WMSLayerFacet WMSDBLayerFacet and WSPLGENLayerFacet
|
| Thu, 06 Feb 2014 13:22:10 +0100 |
Tom Gottfried |
SCHEMA CHANGE: Add UUIDs to rivers.
|
| Tue, 04 Feb 2014 11:08:57 +0100 |
Andre Heinecke |
(issue1692) Ãberarbeitetes Init script
|
| Fri, 31 Jan 2014 19:57:35 +0100 |
Tom Gottfried |
This was obsolete since r5294.
|
| Thu, 23 Jan 2014 17:48:55 +0100 |
Sascha L. Teichmann |
Server side validation for flys/issue1549.
|
| Wed, 22 Jan 2014 13:26:35 +0100 |
Tom Gottfried |
Cross section importer: avoid logging of unused feature.
|
| Wed, 22 Jan 2014 13:25:25 +0100 |
Tom Gottfried |
Close branch slt-simplify-cross-sections.
slt-simplify-cross-sections
|
| Wed, 22 Jan 2014 12:54:18 +0100 |
Tom Gottfried |
Merge slt-simplify-cross-sections branch into default.
|
| Mon, 20 Jan 2014 14:54:35 +0100 |
Sascha L. Teichmann |
Merged
|
| Mon, 20 Jan 2014 12:44:16 +0100 |
Sascha L. Teichmann |
Client side fix for flys/issue1549
|
| Mon, 20 Jan 2014 14:04:20 +0100 |
Tom Gottfried |
Merged default into slt-simplify-cross-sections branch and updated package and class names.
slt-simplify-cross-sections
|
| Mon, 20 Jan 2014 13:01:02 +0100 |
Tom Gottfried |
Add .jar to hgignore.
|
| Thu, 16 Jan 2014 12:02:54 +0100 |
Tom Gottfried |
Importer: fix logging in import_river.sh.
|
| Mon, 13 Jan 2014 11:52:22 +0100 |
Sascha L. Teichmann |
Removed obsolete imports. Fixed Logger in SQ measurement.
|
| Fri, 20 Dec 2013 18:52:09 +0100 |
Andre Heinecke |
Added tag 3.1.1 for changeset 837b620b58b4
|
| Fri, 20 Dec 2013 18:52:05 +0100 |
Andre Heinecke |
Removed tag 3.1.1
3.1.1
|
| Fri, 20 Dec 2013 18:50:55 +0100 |
Andre Heinecke |
Fix doOut for Porosity sublayer
|
| Fri, 20 Dec 2013 18:49:54 +0100 |
Andre Heinecke |
Make GAP_TOLERANCE static
|
| Fri, 20 Dec 2013 18:31:02 +0100 |
Andre Heinecke |
(issue1502) Allow annotation handling to be overwritten
|
| Fri, 20 Dec 2013 16:49:50 +0100 |
Andre Heinecke |
Remove extremly spammy debug output
|
| Fri, 20 Dec 2013 15:10:56 +0100 |
Andre Heinecke |
Added tag 3.1.1 for changeset 20b4dd8a47eb
|
| Fri, 20 Dec 2013 15:10:51 +0100 |
Andre Heinecke |
Removed tag 3.1.1
|
| Fri, 20 Dec 2013 15:10:08 +0100 |
Andre Heinecke |
Fix compilation of the AreaData change.
|
| Fri, 20 Dec 2013 13:09:25 +0100 |
Andre Heinecke |
Added tag 3.1.1 for changeset aa5ad2f62def
|
| Fri, 20 Dec 2013 13:06:03 +0100 |
Andre Heinecke |
Areas are not Volumes!
|
| Fri, 20 Dec 2013 12:50:01 +0100 |
Andre Heinecke |
(issue1574) Add correction curves to W Area compatibility lists
|
| Fri, 20 Dec 2013 12:40:08 +0100 |
Andre Heinecke |
(issue1574) Add area handling for correction curves
|
| Thu, 19 Dec 2013 18:36:00 +0100 |
Andre Heinecke |
(issue1622) Paint W Differences on diffW Axis
|
| Thu, 19 Dec 2013 18:35:03 +0100 |
Andre Heinecke |
(issue1622) Allow areas with w_differences
|
| Thu, 19 Dec 2013 18:19:24 +0100 |
Andre Heinecke |
Only show 3 as we are 3.1.x now
|
| Thu, 19 Dec 2013 10:45:14 +0100 |
Sascha L. Teichmann |
S/Q relation be more correct with judgment if a sieve is correct. Needs load and diameter.
|
| Wed, 18 Dec 2013 19:51:23 +0100 |
Sascha L. Teichmann |
S/Q relation removed false COALSCE from SQL statement. Removed misplaced sieve adjustment.
|
| Wed, 18 Dec 2013 15:37:53 +0100 |
Sascha L. Teichmann |
S/Q relation: Adjust sieves only once during construction.
|
| Wed, 18 Dec 2013 12:39:18 +0100 |
Tom Gottfried |
Variance is defined as the sum of squared differences.
|
| Wed, 18 Dec 2013 09:53:44 +0100 |
Andre Heinecke |
(issue1594) Get the correct differences data
|
| Tue, 17 Dec 2013 18:27:13 +0100 |
Andre Heinecke |
(issue1594) Move Bed differences absolute height into the correct processor
|
| Tue, 17 Dec 2013 17:59:37 +0100 |
Sascha L. Teichmann |
SQ relation: only take sieve which have values at all.
|
| Tue, 17 Dec 2013 17:21:37 +0100 |
Andre Heinecke |
(issue1577, issue1494) Wrap wst name depending on Q > 0
|
| Tue, 17 Dec 2013 14:43:26 +0100 |
Andre Heinecke |
(issue1581) Remove Minfo-heights from differencable
|
| Mon, 16 Dec 2013 19:09:50 +0100 |
Andre Heinecke |
(issue1579) Add Hack to not syncronize and add second axis in static GaugeDischarge
|
| Mon, 16 Dec 2013 19:08:39 +0100 |
Andre Heinecke |
(issue1559) Improve Exception handling and allow null titles
|
| Mon, 16 Dec 2013 16:42:24 +0100 |
Sascha L. Teichmann |
Removed obsolete imports.
|
| Mon, 16 Dec 2013 16:39:12 +0100 |
Sascha L. Teichmann |
SQ Relation: Added CSV dumping to raw SedDB query results.
|
| Mon, 16 Dec 2013 16:24:07 +0100 |
Andre Heinecke |
(issue1649) Remove broken getWKms from RiverUtils and use WDifferencesState instead
|
| Mon, 16 Dec 2013 16:00:10 +0100 |
Andre Heinecke |
(issue1649) Better check for waterlevel data and accept wkms data
|
| Mon, 16 Dec 2013 15:14:40 +0100 |
Sascha L. Teichmann |
Removed obsolete imports.
|
| Mon, 16 Dec 2013 12:41:16 +0100 |
Andre Heinecke |
Add Override marker and fix indention
|
| Mon, 16 Dec 2013 12:26:52 +0100 |
Andre Heinecke |
(issue1596) Sort Export of Middle bedHeight
|
| Mon, 16 Dec 2013 12:23:01 +0100 |
Andre Heinecke |
(issue1596) Make MiddleBedHeightData comparable
|
| Fri, 13 Dec 2013 19:03:00 +0100 |
Andre Heinecke |
(issue1579) Fix axes syncronisation at Gauges
|
| Fri, 13 Dec 2013 17:44:57 +0100 |
Andre Heinecke |
Fix build by removing bedheightsoundingprocessor from old Longitundinal Generator
|
| Fri, 13 Dec 2013 15:39:05 +0100 |
Andre Heinecke |
(issue1225) Unify "Width" processor
|
| Thu, 12 Dec 2013 16:26:21 +0100 |
Andre Heinecke |
(issue1632) Use DOS line endings
|
| Thu, 12 Dec 2013 16:01:40 +0100 |
Andre Heinecke |
(issue1666) Calculate wRow after rounding the first value.
|
| Thu, 12 Dec 2013 07:57:13 +0100 |
Felix Wolfsteller |
issue1577: Add W-Wrapping of wst-names in WKmsFactory if kind is one
|
| Wed, 11 Dec 2013 17:13:26 +0100 |
Andre Heinecke |
(issue1614) Handle NaN in Styled Series created by SedimentLoadProcessors
|
| Wed, 11 Dec 2013 17:11:43 +0100 |
Andre Heinecke |
Remove obsolete Sedimentload class to avoid confusion
|
| Wed, 11 Dec 2013 11:20:10 +0100 |
Felix Wolfsteller |
issue1594/issue1603: Put bed_differences to correct axis.
|
| Wed, 11 Dec 2013 10:39:11 +0100 |
Felix Wolfsteller |
Extracted method.
|
| Tue, 10 Dec 2013 11:22:06 +0100 |
Felix Wolfsteller |
issue1574: Also allow area creation for longitudinal_discharge_sections.
|
| Tue, 10 Dec 2013 09:25:10 +0100 |
Felix Wolfsteller |
issue1547: Add more facets to lists of facets with which areas can be created.
|
| Tue, 10 Dec 2013 09:24:05 +0100 |
Felix Wolfsteller |
issue1574: Set target out for area artifact at creation time.
|
| Tue, 10 Dec 2013 07:15:06 +0100 |
Felix Wolfsteller |
issue1542: I18n change.
|
| Mon, 09 Dec 2013 10:49:34 +0100 |
Sascha L. Teichmann |
dc:sort: Removed unnecessary if check. Forgot to push before tag.
|
| Mon, 09 Dec 2013 10:31:24 +0100 |
Felix Wolfsteller |
Cosmetics, doc.
|
| Mon, 09 Dec 2013 09:56:01 +0100 |
Felix Wolfsteller |
issue1020: Show official lines in datacage to compute uesks, too.
|
| Fri, 06 Dec 2013 16:52:08 +0100 |
Andre Heinecke |
Added tag 3.1.0 for changeset 28f287e84296
|
| Fri, 06 Dec 2013 16:52:00 +0100 |
Andre Heinecke |
Removed tag 3.1.0
3.1.0
|
| Fri, 06 Dec 2013 16:47:02 +0100 |
Andre Heinecke |
(issue1474) Change order of measurement stations
|
| Fri, 06 Dec 2013 16:49:43 +0100 |
Andre Heinecke |
Added tag 3.1.0 for changeset 03dc5cc22e26
|
| Fri, 06 Dec 2013 16:44:37 +0100 |
Tom Gottfried |
Update coefficients in porosity formula.
|
| Fri, 06 Dec 2013 16:34:58 +0100 |
Sascha L. Teichmann |
Datacage: Added <dc:sort>
|
| Fri, 06 Dec 2013 15:36:47 +0100 |
Felix Wolfsteller |
issue1688: In flow velocity, discharges are now initially inactive.
|
| Fri, 06 Dec 2013 14:51:48 +0100 |
Tom Gottfried |
Order by years in SQ-relation datacage.
|
| Fri, 06 Dec 2013 14:27:03 +0100 |
Tom Gottfried |
Order by year in sediment yield datacage.
|
| Fri, 06 Dec 2013 13:58:27 +0100 |
Tom Gottfried |
Add sources/sinks to sediment yield datacage.
|
| Fri, 06 Dec 2013 13:17:05 +0100 |
Tom Gottfried |
Add recommendations for bed quality and flow velocity.
|
| Fri, 06 Dec 2013 12:56:14 +0100 |
Andre Heinecke |
Use correct quotes for long names
|
| Fri, 06 Dec 2013 12:10:24 +0100 |
Felix Wolfsteller |
issue1691: Sedimentload-fetching via datacage now picks right facet.
|
| Fri, 06 Dec 2013 11:21:56 +0100 |
Sascha L. Teichmann |
Removed obsolete import.
|
| Fri, 06 Dec 2013 10:53:01 +0100 |
Felix Wolfsteller |
Fix.
|
| Fri, 06 Dec 2013 10:52:39 +0100 |
Felix Wolfsteller |
issue1020: Do not write Q-Lines with wstwriter from floodmapstate.
|
| Fri, 06 Dec 2013 10:51:47 +0100 |
Felix Wolfsteller |
issue1020: WstWriter: Add flag to ignore Qs alltogether.
|
| Thu, 05 Dec 2013 22:22:37 +0100 |
Felix Wolfsteller |
Improved logging.
|
| Thu, 05 Dec 2013 22:04:15 +0100 |
Felix Wolfsteller |
Cosmetics of WstWriter. Actually, a decent class now.
|
| Thu, 05 Dec 2013 19:37:59 +0100 |
Andre Heinecke |
Do not NPE if there is a folder without mapfiles in the shapefile path
|
| Thu, 05 Dec 2013 19:29:52 +0100 |
Andre Heinecke |
(issue1620) Fix WstWriter Column Header format.
|
| Thu, 05 Dec 2013 17:38:10 +0100 |
Felix Wolfsteller |
issue1020 and others: Let StaticWQKmsState spawn other facets, implement computeAdvance.
|
| Thu, 05 Dec 2013 17:34:10 +0100 |
Felix Wolfsteller |
Doc.
|
| Thu, 05 Dec 2013 17:33:43 +0100 |
Felix Wolfsteller |
Doc.
|
| Thu, 05 Dec 2013 17:33:02 +0100 |
Felix Wolfsteller |
Doc.
|
| Thu, 05 Dec 2013 17:32:34 +0100 |
Felix Wolfsteller |
Whitespace-cosmetics.
|
| Thu, 05 Dec 2013 16:58:26 +0100 |
Felix Wolfsteller |
issue1020: Add WQ constructor that accepts TDoubleArrayList .
|
| Thu, 05 Dec 2013 15:38:35 +0100 |
Felix Wolfsteller |
issue1020: When preparing wsts for wsplgen handle other than standard wqkms calculations.
|
| Thu, 05 Dec 2013 15:35:53 +0100 |
Felix Wolfsteller |
issue1020: Cosmetics.
|
| Thu, 05 Dec 2013 15:35:04 +0100 |
Felix Wolfsteller |
issue1020: Make WQKms able to build from WKms.
|
| Wed, 04 Dec 2013 10:21:08 +0100 |
Felix Wolfsteller |
Added two comments about improvements.
|
| Wed, 04 Dec 2013 10:19:10 +0100 |
Felix Wolfsteller |
Whitespace.
|
| Wed, 04 Dec 2013 10:18:14 +0100 |
Felix Wolfsteller |
Improve logger output.
|
| Tue, 03 Dec 2013 18:00:35 +0100 |
Andre Heinecke |
(issue1610) Add units also for _de
|
| Tue, 03 Dec 2013 16:44:20 +0100 |
Sascha L. Teichmann |
flys/issue1638: Calculate ntot correctly.
|
| Tue, 03 Dec 2013 16:11:54 +0100 |
Sascha L. Teichmann |
Removed obsolete imports.
|
| Tue, 03 Dec 2013 15:09:17 +0100 |
Felix Wolfsteller |
issue1020: Avoid some traps, use WKms and handle data from StaticArtifact.
|
| Tue, 03 Dec 2013 12:25:57 +0100 |
Felix Wolfsteller |
issue1020: Do not set a data with value null, this breaks stuff further
|
| Tue, 03 Dec 2013 12:25:03 +0100 |
Felix Wolfsteller |
issue1020: Handle FixRealizingResult for UESK waterlevel-selection.
|
| Tue, 03 Dec 2013 12:55:17 +0100 |
Andre Heinecke |
(issue1632) Use correct l10n for unit
|
| Tue, 03 Dec 2013 12:50:15 +0100 |
Andre Heinecke |
(issue1632) Add Unit to CSV export
|
| Tue, 03 Dec 2013 11:48:20 +0100 |
Andre Heinecke |
(issue1630) Flush the correct outer output stream
|
| Mon, 02 Dec 2013 14:47:51 +0100 |
Felix Wolfsteller |
issue1043: Add i18n for 'dm'.
|
| Mon, 02 Dec 2013 14:45:57 +0100 |
Felix Wolfsteller |
issue1043: Add 'dm' type.
|
| Mon, 02 Dec 2013 14:43:43 +0100 |
Felix Wolfsteller |
issue1043: Fetch 'dm'-values in QualityMeasurementFactory.
|
| Mon, 02 Dec 2013 14:42:49 +0100 |
Felix Wolfsteller |
issue1043: Add 'dm' to types enum in BedQualityDiameterResult.
|
| Mon, 02 Dec 2013 12:17:33 +0100 |
Felix Wolfsteller |
issue1630: Fix column calculation for bed quality values.
|
| Mon, 02 Dec 2013 12:16:50 +0100 |
Felix Wolfsteller |
Doc.
|
| Mon, 02 Dec 2013 10:47:30 +0100 |
Felix Wolfsteller |
BedQualityExporter: Continue/exit early when no results.
|
| Mon, 02 Dec 2013 10:42:43 +0100 |
Felix Wolfsteller |
Refactoring: extracted method
|
| Mon, 02 Dec 2013 10:08:23 +0100 |
Felix Wolfsteller |
issue1579: Load those official lines automatically.
|
| Mon, 02 Dec 2013 09:56:35 +0100 |
Felix Wolfsteller |
issue1579: ComputedDischargeCurveGenerator: Handle WQKms data.
|
| Mon, 02 Dec 2013 09:55:14 +0100 |
Felix Wolfsteller |
Whistespace.
|
| Mon, 02 Dec 2013 09:48:48 +0100 |
Felix Wolfsteller |
issue1579: Added macro to load interpolated official lines.
|
| Fri, 29 Nov 2013 12:18:16 +0100 |
Felix Wolfsteller |
Use IsOfficialAccess instead of direct property in WaterlevelExporter.
|
| Fri, 29 Nov 2013 12:17:22 +0100 |
Felix Wolfsteller |
Remove close-isOfficial-Handling in StaticWQKmsArtifact.
|
| Fri, 29 Nov 2013 12:16:34 +0100 |
Felix Wolfsteller |
Added new IsOfficalAccess to avoid keeping data too close to StaticWQKmsArtifact.
|
| Fri, 29 Nov 2013 10:49:41 +0100 |
Felix Wolfsteller |
Avoid certain exception, added todo about issues with implementation.
|
| Thu, 28 Nov 2013 12:04:18 +0100 |
Felix Wolfsteller |
Fix doc/debug.
|
| Fri, 29 Nov 2013 11:13:31 +0100 |
Andre Heinecke |
(issue1620) join column names with two empty spaces
|
| Fri, 29 Nov 2013 11:12:31 +0100 |
Andre Heinecke |
(issue1620) Print the real official Q value instead of the first
|
| Thu, 28 Nov 2013 10:16:55 +0100 |
Felix Wolfsteller |
BedQualityExporter: Use foreach instead of manual array loop.
|
| Thu, 28 Nov 2013 10:14:33 +0100 |
Felix Wolfsteller |
BedQualityExporter: Fix ancient i/j variable mix-up.
|
| Thu, 28 Nov 2013 10:13:53 +0100 |
Felix Wolfsteller |
BedQualityExporter: Refactoring.
|
| Thu, 28 Nov 2013 09:54:21 +0100 |
Felix Wolfsteller |
Cosmetics, removed obsolete code.
|
| Thu, 28 Nov 2013 07:26:36 +0100 |
Felix Wolfsteller |
Cosmetics, doc fix.
|
| Wed, 27 Nov 2013 19:14:01 +0100 |
Andre Heinecke |
(issue1611) Correct i18n property for axis label
|
| Wed, 27 Nov 2013 18:50:21 +0100 |
Andre Heinecke |
(issue1667) Remove duplicate points in the same series in Diagram CSV export
|
| Wed, 27 Nov 2013 18:06:04 +0100 |
Andre Heinecke |
(issue1666) Update CSV link in updateLinks, too
|
| Wed, 27 Nov 2013 17:17:54 +0100 |
Andre Heinecke |
(issue1560) Fix off by one error in ATWriter causing the last value to be omitted.
|
| Wed, 27 Nov 2013 16:21:00 +0100 |
Andre Heinecke |
(issue1620) Add export of official lines in WST as specified
|
| Mon, 25 Nov 2013 17:40:47 +0100 |
Andre Heinecke |
(issue1225) Use label code also when only one item is present
|
| Wed, 27 Nov 2013 14:55:25 +0100 |
Felix Wolfsteller |
issue1596: Store table (cell) data twice: Once as (formatted) string
|
| Wed, 27 Nov 2013 14:36:35 +0100 |
Felix Wolfsteller |
Typo fix in doc.
|
| Wed, 27 Nov 2013 11:06:25 +0100 |
Felix Wolfsteller |
issue1596: include river wst unit in csv header for middle bed height.
|
| Wed, 27 Nov 2013 11:05:38 +0100 |
Felix Wolfsteller |
issue1596: Add unit to middlebedheight csv header.
|
| Mon, 25 Nov 2013 14:59:21 +0100 |
Andre Heinecke |
Remove uneccessary debug output added in last commit.
|
| Mon, 25 Nov 2013 14:58:14 +0100 |
Andre Heinecke |
(issue1225) Implement Magic labels.
|
| Mon, 25 Nov 2013 14:53:50 +0100 |
Andre Heinecke |
(issue1225) Unify Height BedHeight and W axis
|
| Thu, 21 Nov 2013 17:27:14 +0100 |
Felix Wolfsteller |
issue1558: Allow fixed axis for timeseries-diagrams.
|
| Thu, 21 Nov 2013 15:40:05 +0100 |
Andre Heinecke |
Add isValid method for single double arrays
|
| Thu, 21 Nov 2013 15:37:43 +0100 |
Andre Heinecke |
Rename the Global Facet filter to reduce ambiguity with the old facet filter
|
| Thu, 21 Nov 2013 15:35:32 +0100 |
Andre Heinecke |
Add timestamp type
|
| Thu, 21 Nov 2013 15:33:42 +0100 |
Andre Heinecke |
issue1225 Add i18n for bedheight and use wst height system as unit
|
| Wed, 20 Nov 2013 11:06:17 +0100 |
Felix Wolfsteller |
Allow more compact display of mainvalue-table.
|
| Wed, 20 Nov 2013 11:03:53 +0100 |
Felix Wolfsteller |
issue1542: Profit from refactoring, use same columns/fields for QDTable.
|
| Wed, 20 Nov 2013 11:03:26 +0100 |
Felix Wolfsteller |
issue1542: Only show year of date for mainvalues validity, refactoring.
|
| Wed, 20 Nov 2013 11:02:55 +0100 |
Felix Wolfsteller |
issue1542: Reorder columns for main value validity dates.
|
| Wed, 20 Nov 2013 10:02:27 +0100 |
Felix Wolfsteller |
issue1613: added accidentally omitted i18n.
|
| Tue, 19 Nov 2013 11:30:50 +0100 |
Felix Wolfsteller |
issue1597: Re-enable w/q points in DischargeProcessor. It's yet unclear why it was disabled.
|
| Tue, 19 Nov 2013 10:46:24 +0100 |
Felix Wolfsteller |
Renamed winfo variable to more fitting name artifact.
|
| Tue, 19 Nov 2013 10:20:27 +0100 |
Felix Wolfsteller |
issue1606: Handle annotation text as well.
|
| Tue, 19 Nov 2013 10:19:25 +0100 |
Felix Wolfsteller |
issue1606: Added methods to parse omitted theme properties.
|
| Tue, 19 Nov 2013 10:17:59 +0100 |
Felix Wolfsteller |
issue1606: Handle textstyle property in clients StyleEditorWindow.
|
| Mon, 18 Nov 2013 15:38:52 +0100 |
Felix Wolfsteller |
issue1063: Always create data for all parameters, even if not specified.
|
| Mon, 18 Nov 2013 15:37:33 +0100 |
Felix Wolfsteller |
issue1063: Expose column names in ParameterMatrix.
|
| Mon, 18 Nov 2013 14:37:35 +0100 |
Tom Gottfried |
Add i18n for SQ-Outliermethod help-URL.
|
| Mon, 18 Nov 2013 13:11:12 +0100 |
Tom Gottfried |
Add units to flow velocity export headers.
|
| Mon, 18 Nov 2013 12:30:36 +0100 |
Felix Wolfsteller |
issue1613: In DC, also show the 'diff' facets, define former calc. for hist. W/Q out.
|
| Mon, 18 Nov 2013 12:22:22 +0100 |
Felix Wolfsteller |
issue1631: Allow loading of some former historical-discharge facets.
|
| Thu, 14 Nov 2013 12:02:26 +0100 |
Felix Wolfsteller |
Doc.
|
| Thu, 14 Nov 2013 12:00:43 +0100 |
Felix Wolfsteller |
Builder: Slightly more verbose errormessage.
|
| Thu, 14 Nov 2013 11:58:51 +0100 |
Felix Wolfsteller |
issue1020: Display more waterlevels for uesk.
|
| Thu, 14 Nov 2013 11:56:47 +0100 |
Felix Wolfsteller |
issue1020: In WaterlevelSelectState create label more differentiated at
|
| Thu, 14 Nov 2013 11:54:02 +0100 |
Felix Wolfsteller |
issue1020: Let WspDatacagePanel also handle non-winfo (prev. calc) rec.
|
| Thu, 14 Nov 2013 06:44:11 +0100 |
Felix Wolfsteller |
issue1020: Added pointers as comments in code.
|
| Wed, 13 Nov 2013 12:00:21 +0100 |
Felix Wolfsteller |
Fix i18n.
|
| Wed, 13 Nov 2013 11:59:26 +0100 |
Felix Wolfsteller |
issue1611,1046: Adjusted i18n for tau.
|
| Wed, 13 Nov 2013 11:32:47 +0100 |
Felix Wolfsteller |
issue1592: Fix csv headers for w or q calculations.
|
| Wed, 13 Nov 2013 08:10:00 +0100 |
Felix Wolfsteller |
issue1542: Include validity also in qdtable, reorder code, widen column width.
|
| Wed, 13 Nov 2013 08:09:19 +0100 |
Felix Wolfsteller |
issue1542: Sweeten i18n.
|
| Tue, 12 Nov 2013 19:47:24 +0100 |
Sascha L. Teichmann |
flys/issue1503: Evil hack to force loaded of data to be bound to 'w_differences'. TODO: Remove all the broken code from DataCageTwinPanel.
|
| Tue, 12 Nov 2013 17:46:04 +0100 |
Felix Wolfsteller |
issue1542: Do not show link to w/q value view if no mainvalues are there.
|
| Tue, 12 Nov 2013 17:15:21 +0100 |
Felix Wolfsteller |
issue1542: Let client to i18n and formatting of dates.
|
| Tue, 12 Nov 2013 17:14:52 +0100 |
Felix Wolfsteller |
issue1542: WQInfoObjectImpl: Changed implementation from String to Date.
|
| Tue, 12 Nov 2013 17:14:24 +0100 |
Felix Wolfsteller |
issue1542: WQInfoObject: Changed properties from String to Date.
|
| Tue, 12 Nov 2013 17:13:07 +0100 |
Felix Wolfsteller |
issue1542: Added i18n for start/stoptimes of main values.
|
| Tue, 12 Nov 2013 17:11:51 +0100 |
Felix Wolfsteller |
issue1542: Make WQInfoObjects and server provide start and end date for mainvalues, display in table.
|
| Tue, 12 Nov 2013 17:10:38 +0100 |
Felix Wolfsteller |
Typo fix in debug output.
|
| Tue, 12 Nov 2013 12:11:23 +0100 |
Felix Wolfsteller |
issue1542: Let MainValues have localized dates.
|
| Tue, 12 Nov 2013 11:47:25 +0100 |
Felix Wolfsteller |
Add start- and stoptime to WQInfoObjects.
|
| Tue, 12 Nov 2013 11:46:24 +0100 |
Felix Wolfsteller |
issue1542: Add timeinterval-data to mainvalues made available via service.
|
| Tue, 12 Nov 2013 11:45:47 +0100 |
Felix Wolfsteller |
Doc, cosmetics.
|
| Mon, 11 Nov 2013 11:45:00 +0100 |
Felix Wolfsteller |
Removed obsolete method.
|
| Mon, 11 Nov 2013 11:33:53 +0100 |
Felix Wolfsteller |
Minor refactoring for future readability and refactoring.
|
| Tue, 12 Nov 2013 16:54:18 +0100 |
Sascha L. Teichmann |
Previous fix for flys/issue1675 was broken. :-/
|
| Tue, 12 Nov 2013 15:37:38 +0100 |
Sascha L. Teichmann |
Workaround for flys/issue1675: Guarantee that the years are always between 0 and 9999 in macro 'minfo-heights'.
|
| Fri, 08 Nov 2013 18:26:55 +0100 |
Sascha L. Teichmann |
Added tag 3.0.18 for changeset b82750667e1a
|
| Fri, 08 Nov 2013 18:04:51 +0100 |
Sascha L. Teichmann |
Some i18n for Vollmer curve calculation.
3.0.18
|
| Fri, 08 Nov 2013 16:15:38 +0100 |
Sascha L. Teichmann |
More on flys/issue1585: Do not fill circle for interpolated W/Q points.
|
| Fri, 08 Nov 2013 12:27:08 +0100 |
Felix Wolfsteller |
Fix i18n (missing closing bracket).
|
| Fri, 08 Nov 2013 12:26:38 +0100 |
Felix Wolfsteller |
issue1762: correct facet names.
|
| Fri, 08 Nov 2013 11:58:55 +0100 |
sascha teichmann |
issue1585: Part 2/2 of patch from Sascha Teichmann to define datapoint shapes.
|
| Fri, 08 Nov 2013 11:57:37 +0100 |
sascha teichmann |
issue1585: Part 1/2 of patch from Sascha Teichmann to define shape for datapoints.
|
| Fri, 08 Nov 2013 10:38:37 +0100 |
Felix Wolfsteller |
Fixed logger instantiations that were done with wrong class.
|
| Fri, 08 Nov 2013 10:22:32 +0100 |
Felix Wolfsteller |
Added spooky ruby script to get started fixing logger instances of wrong classes.
|
| Fri, 08 Nov 2013 08:03:42 +0100 |
Felix Wolfsteller |
Whacky little script to find possibly wrong loggers.
|
| Thu, 07 Nov 2013 19:31:16 +0100 |
Tom Gottfried |
Add units to bedquality exporter columns.
|
| Thu, 07 Nov 2013 18:13:45 +0100 |
Tom Gottfried |
Change column name in bedheight export.
|
| Thu, 07 Nov 2013 18:13:00 +0100 |
Tom Gottfried |
Fix column names in flow velocity export.
|
| Thu, 07 Nov 2013 11:10:58 +0100 |
Felix Wolfsteller |
issue1512: i18n.
|
| Thu, 07 Nov 2013 10:27:41 +0100 |
Felix Wolfsteller |
Cosmetics, break overlong lines.
|
| Thu, 07 Nov 2013 09:44:38 +0100 |
Felix Wolfsteller |
Doc.
|
| Thu, 07 Nov 2013 09:43:44 +0100 |
Felix Wolfsteller |
Cosmetics.
|
| Thu, 07 Nov 2013 09:43:20 +0100 |
Felix Wolfsteller |
SedimentLoadAccess: Slightly improved readability.
|
| Thu, 07 Nov 2013 09:42:19 +0100 |
Felix Wolfsteller |
issue1658: Do not store Access in State.
|
| Thu, 07 Nov 2013 09:03:34 +0100 |
Felix Wolfsteller |
Fix SedimentLoadAccess logger instance.
|
| Wed, 06 Nov 2013 19:41:12 +0100 |
Sascha L. Teichmann |
Simplified code.
|
| Wed, 06 Nov 2013 19:18:50 +0100 |
Sascha L. Teichmann |
Removed obsolete facet for fix events in vollmer curve.
|
| Wed, 06 Nov 2013 19:12:46 +0100 |
Sascha L. Teichmann |
Part fix for flys/issue1585: Use result from fitting to display interpolated W/Q points, too. TODO: Draw interpolated as circles.
|
| Wed, 06 Nov 2013 12:07:48 +0100 |
Felix Wolfsteller |
issue1664: Let DC instruct StaticWKmsArtifact to spawn facets
|
| Wed, 06 Nov 2013 12:03:38 +0100 |
Felix Wolfsteller |
issue1664: Add new Processors to old axis and map them in longitudinal-diagram-defaults.
|
| Wed, 06 Nov 2013 11:57:35 +0100 |
Felix Wolfsteller |
issue1664: Prepare new Facets to go to different axis (for wkms from fixa/diffs).
|
| Wed, 06 Nov 2013 09:40:23 +0100 |
Felix Wolfsteller |
issue1658: Fix fine_middle epoch facet name.
|
| Mon, 04 Nov 2013 17:24:33 +0100 |
Felix Wolfsteller |
issue1658: Adjuste facet descriptions to include unit.
|
| Mon, 04 Nov 2013 17:15:20 +0100 |
Felix Wolfsteller |
issue1658: Add unit name to facet description.
|
| Mon, 04 Nov 2013 17:13:44 +0100 |
Felix Wolfsteller |
issue1658: i18n for upcoming sediment load facet names (including t/a or m^3/a).
|
| Mon, 04 Nov 2013 15:57:47 +0100 |
Felix Wolfsteller |
issue1658: Fix theme styles for sediment load (t/a and m^3/a) facets.
|
| Mon, 04 Nov 2013 15:15:13 +0100 |
Felix Wolfsteller |
issue1663: Fix. HistoricalDischargeFacet transmorphed to WaterlevelFacet when cloned.
|
| Mon, 04 Nov 2013 11:26:02 +0100 |
Sascha L. Teichmann |
Merged
|
| Mon, 04 Nov 2013 11:24:30 +0100 |
Sascha L. Teichmann |
Added tag 3.0.17 for changeset 607246315009
|
| Mon, 04 Nov 2013 11:24:02 +0100 |
Sascha L. Teichmann |
Removed tag 3.0.17
|
| Mon, 04 Nov 2013 10:53:23 +0100 |
Sascha L. Teichmann |
Added tag 3.0.17 for changeset e97867879a45
|
| Fri, 01 Nov 2013 18:36:39 +0100 |
Sascha L. Teichmann |
Removed obsolete imports.
|
| Fri, 01 Nov 2013 16:44:49 +0100 |
Felix Wolfsteller |
WOutProcessor: Reorder statements so that function-call-debug-msg comes first.
|
| Fri, 01 Nov 2013 16:41:54 +0100 |
Felix Wolfsteller |
White-space cosmetics.
|
| Fri, 01 Nov 2013 16:41:16 +0100 |
Felix Wolfsteller |
cosmetics - full stop.
|
| Fri, 01 Nov 2013 16:40:16 +0100 |
Felix Wolfsteller |
cosmetics, doc.
|
| Fri, 01 Nov 2013 16:38:03 +0100 |
Felix Wolfsteller |
Whitespace-cosmetics.
|
| Fri, 01 Nov 2013 16:37:19 +0100 |
Felix Wolfsteller |
issue1658: Fix SedimentLoadLSGenerator (with surprise: isnt that done via processors?).
|
| Fri, 01 Nov 2013 16:31:24 +0100 |
Felix Wolfsteller |
Remove now obsolete SedimentLoadProcessor.
|
| Fri, 01 Nov 2013 16:30:52 +0100 |
Felix Wolfsteller |
issue1658: New Processors for t/a and m^3/a -axis (stripped down from SedimentLoadProcessor).
|
| Fri, 01 Nov 2013 16:29:40 +0100 |
Felix Wolfsteller |
issue1658: Handle new Facet-Types for SedimentLoad.
|
| Fri, 01 Nov 2013 16:27:49 +0100 |
Felix Wolfsteller |
issue1658: Adjust Facet to new facet-types (t/a and m^3/a).
|
| Fri, 01 Nov 2013 16:26:15 +0100 |
Felix Wolfsteller |
issue1658: Define new FacetTypes and IS functions.
|
| Fri, 01 Nov 2013 16:25:19 +0100 |
Felix Wolfsteller |
issue1658: Let SedimentYieldArtifact create facet based on Sed.L. unit.
|
| Fri, 01 Nov 2013 16:23:32 +0100 |
Felix Wolfsteller |
issue1658: Have SedimentLoadFactory deliver unit name for given id.
|
| Fri, 01 Nov 2013 16:22:11 +0100 |
Felix Wolfsteller |
issue1658: Instead of one SedimentLoad-Axis, have two (t/a, m^3/a).
|
| Fri, 01 Nov 2013 16:21:20 +0100 |
Felix Wolfsteller |
issue1658: Prepare minfo-artifact (.xml) to output t/a and m^3/a facets.
|
| Fri, 01 Nov 2013 15:05:35 +0100 |
Sascha L. Teichmann |
Datacage: Removed macro "delta-wt-ls" from meta-data.xml as it is not used.
3.0.17
|
| Fri, 01 Nov 2013 13:25:54 +0100 |
Sascha L. Teichmann |
Fixed half broken interpolation code for lines to 'Dauerlinie'.
|
| Fri, 01 Nov 2013 12:12:24 +0100 |
Felix Wolfsteller |
meta-data.xml: Removed junk.
|
| Fri, 01 Nov 2013 12:11:59 +0100 |
Felix Wolfsteller |
issue1571: Exclude vollmer curves from general longitudinal dc folder.
|
| Fri, 01 Nov 2013 11:13:38 +0100 |
Felix Wolfsteller |
issue1571: Hav eown folder in dc for vollmer curves.
|
| Fri, 01 Nov 2013 11:12:38 +0100 |
Felix Wolfsteller |
issue1571: i18n.
|
| Fri, 01 Nov 2013 11:50:11 +0100 |
Sascha L. Teichmann |
Removed redundant lookup for km in call context.
|
| Thu, 31 Oct 2013 21:56:04 +0100 |
Tom Gottfried |
WST-Parser: revert the assumption of only complete columns.
|
| Thu, 31 Oct 2013 19:16:42 +0100 |
Tom Gottfried |
Correct r7481: use ParseException instead of IllegalArgument that was catched at wrong place.
|
| Thu, 31 Oct 2013 19:03:57 +0100 |
Sascha L. Teichmann |
Removed charset encoding on outs. They are mainly binary data which simply should be proxied through.
|
| Thu, 31 Oct 2013 18:34:10 +0100 |
Sascha L. Teichmann |
Merged
|
| Thu, 31 Oct 2013 18:30:46 +0100 |
Sascha L. Teichmann |
WQDay is increasing(?) if it is empty of last is greater than first.
|
| Thu, 31 Oct 2013 18:26:49 +0100 |
Sascha L. Teichmann |
Dont assume that wqdays are always of none zero length.
|
| Thu, 31 Oct 2013 18:25:26 +0100 |
Sascha L. Teichmann |
Datacage recommendations: Sort outs to to generate consistent cache keys.
|
| Thu, 31 Oct 2013 15:25:31 +0100 |
Tom Gottfried |
WST-Parser and doc: reject files with wrong number of columns.
|
| Thu, 31 Oct 2013 13:11:03 +0100 |
Tom Gottfried |
WST-Parser: Improve handling of line-endings.
|
| Thu, 31 Oct 2013 11:56:45 +0100 |
Tom Gottfried |
Log errors instead of starting WSPLGEN if required arguments are missing.
|
| Thu, 31 Oct 2013 11:44:09 +0100 |
Felix Wolfsteller |
issue1657: Adjust DC conf to spawn sounding widths.
|
| Thu, 31 Oct 2013 11:43:32 +0100 |
Felix Wolfsteller |
issue1657: Spawn BEDHEIGHT_SOUNDING_WIDTH facet if asked to. Twiggly.
|
| Thu, 31 Oct 2013 11:41:39 +0100 |
Felix Wolfsteller |
i18n for sounding with axis and facet.
|
| Wed, 30 Oct 2013 17:35:12 +0100 |
Sascha L. Teichmann |
Datacage recommendations caching: Use LFU strategy to rotate parameter recommendations out earlier. This should be a better config in multiuser user setups because the more frequently used terminal state recs will survive longer.
|
| Wed, 30 Oct 2013 16:04:06 +0100 |
Felix Wolfsteller |
issue1345: Add flow_velocities folder.
|
| Wed, 30 Oct 2013 16:03:28 +0100 |
Felix Wolfsteller |
issue1345: i18n for dc.
|
| Wed, 30 Oct 2013 15:51:33 +0100 |
Andre Heinecke |
Dokumention zur Installation erweitert
|
| Wed, 30 Oct 2013 15:26:21 +0100 |
Sascha L. Teichmann |
Experimental caching of datacage recommendations. The respective hook is called a lot and running the datacage over and over again when loading data can be expensive. So the generated recommendations are cached for some time.
|
| Wed, 30 Oct 2013 15:02:16 +0100 |
Felix Wolfsteller |
issue1512: Fix loading of all former flow vel. calculation via folder.
|
| Wed, 30 Oct 2013 14:53:26 +0100 |
Felix Wolfsteller |
issue1512: Show all flowvelocity facet in former calc. flow vel. part of dc.
|
| Wed, 30 Oct 2013 12:24:03 +0100 |
Felix Wolfsteller |
issue1571: i18n.
|
| Wed, 30 Oct 2013 12:03:07 +0100 |
Felix Wolfsteller |
issue1572: Call longitudinal-section-user-prototype for bedheight-diffs/year.
|
| Wed, 30 Oct 2013 11:59:09 +0100 |
Sascha L. Teichmann |
Merged
|
| Wed, 30 Oct 2013 11:58:57 +0100 |
Sascha L. Teichmann |
Datacage: Remove tree branches vom datacage tree on client side which do not contain loadable data.
|
| Wed, 30 Oct 2013 11:57:04 +0100 |
Sascha L. Teichmann |
Simplified recommendattion monitor code a bit.
|
| Wed, 30 Oct 2013 11:56:13 +0100 |
Sascha L. Teichmann |
Code cleanup.
|
| Wed, 30 Oct 2013 11:55:10 +0100 |
Sascha L. Teichmann |
Fix for flys/issue1654: Divide through denisity, do not multiply.
|
| Tue, 29 Oct 2013 19:59:59 +0100 |
Tom Gottfried |
Schema change: add lookup table for sediment yield kinds to have its values documented.
|
| Tue, 29 Oct 2013 19:46:41 +0100 |
Sascha L. Teichmann |
flys/issue1625: Changed default sediment density factor from 1.8 to 1.9 . The value can be changed by adusting conf.xml (/artifact-databae/options/sediment-density-factor/text()).
|
| Tue, 29 Oct 2013 19:17:28 +0100 |
Tom Gottfried |
Importer: document where annotations are searched for.
|
| Tue, 29 Oct 2013 18:57:40 +0100 |
Tom Gottfried |
run_geo.sh: allow logging as documented.
|
| Tue, 29 Oct 2013 11:32:56 +0100 |
Felix Wolfsteller |
issue1397: Fix reference_curve former calculations in dc.
|
| Tue, 29 Oct 2013 11:31:59 +0100 |
Felix Wolfsteller |
dc i18n.
|
| Tue, 29 Oct 2013 10:42:12 +0100 |
Felix Wolfsteller |
issue1512: Repair loading all of flowvelocitymeasurements by not equipping
|
| Mon, 28 Oct 2013 15:46:26 +0100 |
Andre Heinecke |
inor Layout + Wiki
|
| Mon, 28 Oct 2013 14:22:02 +0100 |
Andre Heinecke |
Rechtschreibkorrektur (durchgeführt von Bettina)
|
| Mon, 28 Oct 2013 14:15:53 +0100 |
Andre Heinecke |
More installation documentation
|
| Mon, 28 Oct 2013 12:14:46 +0100 |
Felix Wolfsteller |
issue1345: Sort sediment densities by year.
|
| Mon, 28 Oct 2013 11:52:14 +0100 |
Felix Wolfsteller |
meta-data.xml: Simplify query for densities a bit, sort by depth.
|
| Sun, 27 Oct 2013 17:30:38 +0100 |
Andre Heinecke |
Start installation documentation for specific client installation
|
| Fri, 25 Oct 2013 17:06:30 +0200 |
Tom Gottfried |
Importer doc: fix some outdated or wrong infos.
|
| Fri, 25 Oct 2013 16:57:15 +0200 |
Tom Gottfried |
Importer and doc: Warn instead of die if AT- or STA-file is missing for a gauge.
|
| Fri, 25 Oct 2013 14:32:11 +0200 |
Felix Wolfsteller |
FacetTypes: Cosmetics.
|
| Fri, 25 Oct 2013 14:31:56 +0200 |
Felix Wolfsteller |
Declare certain bedheight-diagrams as charttypes, for manual points.
|
| Fri, 25 Oct 2013 14:29:38 +0200 |
Felix Wolfsteller |
meta-data.xml: Include bedheight-diffs per year in minfo-user-dc.
|
| Fri, 25 Oct 2013 14:10:29 +0200 |
Felix Wolfsteller |
meta-data.xml: Subsume the different bed-quality dc-nodes.
|
| Fri, 25 Oct 2013 13:53:48 +0200 |
Felix Wolfsteller |
i18n for dc added.
|
| Fri, 25 Oct 2013 13:52:47 +0200 |
Felix Wolfsteller |
meta-data.xml: Ease i18nability.
|
| Fri, 25 Oct 2013 15:39:59 +0200 |
Tom Gottfried |
Geoimporter: be case-insensitive when looking for floodplains.
|
| Fri, 25 Oct 2013 15:02:08 +0200 |
Tom Gottfried |
make-opt-package.sh: give path to internal 'repository'.
|
| Fri, 25 Oct 2013 07:25:19 +0200 |
Felix Wolfsteller |
meta-data.xml: Remove duplicates and 'special' macros fro special outs from
|
| Fri, 25 Oct 2013 07:24:15 +0200 |
Felix Wolfsteller |
meta-data.xml: Remove delta-wt from longitudinal-section-user-prototype .
|
| Fri, 25 Oct 2013 07:16:16 +0200 |
Felix Wolfsteller |
Fix Typo in german i18n (e.g. issue1345) .
|
| Wed, 23 Oct 2013 17:45:56 +0200 |
Felix Wolfsteller |
Partly revert rev 7419, conservative guess about which "outs" are handcrafted.
|
| Fri, 25 Oct 2013 03:47:04 +0200 |
Sascha L. Teichmann |
Experimental patch: Do not run datacage on artifacts that are loaded from datacage. His hopefully minimizes the datacage runs when a lot of data is loaded.
|
| Thu, 24 Oct 2013 23:06:40 +0200 |
Tom Gottfried |
Importer doc: fix some layout issues.
|
| Wed, 23 Oct 2013 17:20:55 +0200 |
Felix Wolfsteller |
Made SedimentDensityValue Serializable.
|
| Wed, 23 Oct 2013 17:20:30 +0200 |
Felix Wolfsteller |
issue1345: Re-enable sediment load total loads, now that factory is fixed.
|
| Wed, 23 Oct 2013 17:19:30 +0200 |
Felix Wolfsteller |
Fix total sediment load fetching.
|
| Wed, 23 Oct 2013 17:08:07 +0200 |
Felix Wolfsteller |
issue1345: Showing sediment densitie by depth, comment total load.
|
| Wed, 23 Oct 2013 14:53:47 +0200 |
Tom Gottfried |
Fix typo.
|
| Wed, 23 Oct 2013 12:43:26 +0200 |
Andre Heinecke |
(issue965) Handle the case that diffids are not available
|
| Wed, 23 Oct 2013 12:09:36 +0200 |
Felix Wolfsteller |
meta-data.xml: Be less restrictive in showing facets from waterlevels-discharge.
|
| Wed, 23 Oct 2013 12:08:30 +0200 |
Felix Wolfsteller |
meta-data.xml: Exclude empty.facet s.
|
| Wed, 23 Oct 2013 12:07:35 +0200 |
Felix Wolfsteller |
meta-meta.xml: Also fetch extreme_base curves via dc.
|
| Wed, 23 Oct 2013 12:07:05 +0200 |
Felix Wolfsteller |
meta-data.xml: cosmetics.
|
| Wed, 23 Oct 2013 11:41:24 +0200 |
Felix Wolfsteller |
Add another axis (height) to longitudinal-diagram-defaults.
|
| Wed, 23 Oct 2013 11:33:31 +0200 |
Felix Wolfsteller |
meta-data.xml: Cosmetics.
|
| Wed, 23 Oct 2013 11:22:47 +0200 |
Felix Wolfsteller |
meta-data.xml: More usage of collection-group-macro.
|
| Wed, 23 Oct 2013 11:28:25 +0200 |
Sascha L. Teichmann |
Datacage: Consequently call macro 'longitudinal-section-user-prototype' in all longitudinal sections of old calculation. Moved asymmeterical stuff to prototype. This may crash!
|
| Wed, 23 Oct 2013 11:04:06 +0200 |
Felix Wolfsteller |
meta-data.xml: Create and use collection-group macro.
|
| Wed, 23 Oct 2013 09:59:46 +0200 |
Tom Gottfried |
BedHeightSingleParser: fix no-data-line detection.
|
| Wed, 23 Oct 2013 08:20:11 +0200 |
Sascha L. Teichmann |
Datacage ref doc: More docs on functions.
|
| Tue, 22 Oct 2013 17:00:47 +0200 |
Sascha L. Teichmann |
Datacage ref doc: More docs for functions.
|
| Tue, 22 Oct 2013 16:24:08 +0200 |
Felix Wolfsteller |
issue1205: made SedimentDensity serializable.
|
| Tue, 22 Oct 2013 15:51:33 +0200 |
Felix Wolfsteller |
meta-data.xml: Switch more longitudinal-section like user-dc content to prototype macro.
|
| Tue, 22 Oct 2013 15:43:13 +0200 |
Sascha L. Teichmann |
Datacage: Fixed macro call.
|
| Tue, 22 Oct 2013 15:34:51 +0200 |
Sascha L. Teichmann |
Fixed meta-data.xml
|
| Tue, 22 Oct 2013 15:07:24 +0200 |
Sascha L. Teichmann |
Datacage ref doc: More doc for functions.
|
| Tue, 22 Oct 2013 12:21:21 +0200 |
Felix Wolfsteller |
issue1512: Sort flow-velocity-models by discharge_zone.value.
|
| Tue, 22 Oct 2013 12:15:33 +0200 |
Felix Wolfsteller |
issue1473: Show differences project name in dc.
|
| Tue, 22 Oct 2013 11:57:17 +0200 |
Felix Wolfsteller |
meta-data.xml: Fix referenced out for discharge_longitudinal_section.
|
| Mon, 21 Oct 2013 19:05:41 +0200 |
Andre Heinecke |
(issue965) Add a comment to explain what we do here
|
| Mon, 21 Oct 2013 18:57:30 +0200 |
Andre Heinecke |
(issue965) Use new datacage magic to have year filtering for bedheights
|
| Mon, 21 Oct 2013 17:54:34 +0200 |
Tom Gottfried |
Importer doc: mention flow direction retrieval from WST.
|
| Mon, 21 Oct 2013 17:43:01 +0200 |
Sascha L. Teichmann |
Removed dc:to-date(). Added 'date' type for <dc:convert> instead.
|
| Mon, 21 Oct 2013 12:21:40 +0200 |
Felix Wolfsteller |
issue1521: Adhere more to dc 'spec', show discharges of flow velocity models.
|
| Mon, 21 Oct 2013 12:22:40 +0200 |
Sascha L. Teichmann |
Datacage reference doc: Explain dc:container-context and dc:properties.
|
| Mon, 21 Oct 2013 11:43:50 +0200 |
Sascha L. Teichmann |
Datacage: Added TODOs for new functions in ref document.
|
| Mon, 21 Oct 2013 11:28:14 +0200 |
Felix Wolfsteller |
issue1512: Make double entry of Q facet for flowvelocities dissappear.
|
| Fri, 18 Oct 2013 16:41:10 +0200 |
Felix Wolfsteller |
Fix typo in german i18n.
|
| Fri, 18 Oct 2013 12:20:55 +0200 |
Felix Wolfsteller |
issue1512: improved i18n for flow velocity measurement facets.
|
| Thu, 17 Oct 2013 16:15:14 +0200 |
Felix Wolfsteller |
BedHeightProcessor: Finally display heights, not widths.
|
| Thu, 17 Oct 2013 15:36:13 +0200 |
Felix Wolfsteller |
BedHeightProcessor: Set axis label.
|
| Thu, 17 Oct 2013 15:36:00 +0200 |
Felix Wolfsteller |
BedHeight(Sounding)Processor: Use FacetTypes.
|
| Thu, 17 Oct 2013 15:23:07 +0200 |
Felix Wolfsteller |
Removed debris.
|
| Thu, 17 Oct 2013 15:21:57 +0200 |
Felix Wolfsteller |
Moved BedHeightEpoch to BedHeightEpochData.
|
| Thu, 17 Oct 2013 15:08:59 +0200 |
Felix Wolfsteller |
Renamed artifacts/**/BedHeight(Single) to BedHeight(Single)Data, to resolve
|
| Thu, 17 Oct 2013 11:12:14 +0200 |
Felix Wolfsteller |
Stub for new BedHeightProcessor.
|
| Thu, 17 Oct 2013 10:53:34 +0200 |
Felix Wolfsteller |
BedHeightSoundingProcessor: Log if data is now handled.
|
| Thu, 17 Oct 2013 10:50:04 +0200 |
Felix Wolfsteller |
BedHeightSoundingProcessor: refactored to avoid drifting behavior when using
|
| Thu, 17 Oct 2013 09:40:12 +0200 |
Felix Wolfsteller |
meta-data.xml: cleanup longitudinal-section-user-prototype, removing dupes.
|
| Mon, 21 Oct 2013 10:49:39 +0200 |
Sascha L. Teichmann |
Removed same package import.
|
| Mon, 21 Oct 2013 10:48:51 +0200 |
Sascha L. Teichmann |
Removed obsolete import.
|
| Fri, 18 Oct 2013 18:40:50 +0200 |
Sascha L. Teichmann |
Datacage: Add function dc:to-date(number) which converts a epoch base number to a date object.
|
| Fri, 18 Oct 2013 18:36:18 +0200 |
Sascha L. Teichmann |
Datacage: Added dc:min-number(list) and dc:max-number(list) to extract the numerical
|
| Fri, 18 Oct 2013 18:15:33 +0200 |
Sascha L. Teichmann |
Datacage: Add function dc:find-all(needle, haystack).
|
| Fri, 18 Oct 2013 15:44:01 +0200 |
Andre Heinecke |
(issue1474) Fix deepCopy signatures and actually copy the facet index now
|
| Fri, 18 Oct 2013 15:30:44 +0200 |
Andre Heinecke |
(issue1071) Handle the case where no MeasurementStation exists
|
| Thu, 17 Oct 2013 18:56:44 +0200 |
Sascha L. Teichmann |
More datacage ref doc.
|
| Thu, 17 Oct 2013 18:37:56 +0200 |
Andre Heinecke |
(issue1474) Fix copying of SQ* Facets
|
| Thu, 17 Oct 2013 17:47:58 +0200 |
Tom Gottfried |
Importer: Avoid 0-lenght Q-ranges in WST-CSV-parsers.
|
| Thu, 17 Oct 2013 15:26:12 +0200 |
Sascha L. Teichmann |
Replaced more tabs with spaces + minor cosmetics (removed out commented code from double precision branch).
|
| Thu, 17 Oct 2013 15:13:32 +0200 |
Sascha L. Teichmann |
Replaced tabs with 4 spaces.
|
| Thu, 17 Oct 2013 15:05:08 +0200 |
Tom Gottfried |
WstParser: Do not add Q-range for trailing Q-line.
|
| Thu, 17 Oct 2013 12:14:10 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
| Thu, 17 Oct 2013 12:11:09 +0200 |
Sascha L. Teichmann |
Removed obsolete import + whitespace cleanup.
|
| Thu, 17 Oct 2013 08:29:46 +0200 |
Felix Wolfsteller |
Add getModelDescription to FlowVelocityModel.
|
| Thu, 17 Oct 2013 07:48:51 +0200 |
Felix Wolfsteller |
White space cosmetics, added debug output.
|
| Thu, 17 Oct 2013 07:46:36 +0200 |
Felix Wolfsteller |
SedimentYieldArtifact: Accept 'total' load, genreate facet for it.
|
| Thu, 17 Oct 2013 07:45:41 +0200 |
Felix Wolfsteller |
FlowVelocityModelArtifact: Slightly improve facet names.
|
| Thu, 17 Oct 2013 07:45:13 +0200 |
Felix Wolfsteller |
Cosmetics.
|
| Thu, 17 Oct 2013 07:44:34 +0200 |
Felix Wolfsteller |
Cosmetics.
|
| Thu, 17 Oct 2013 07:42:31 +0200 |
Felix Wolfsteller |
issue1473: Let vollmer curves appear under 'former calc/waterlevels from fix.'.
|
| Thu, 17 Oct 2013 07:39:42 +0200 |
Felix Wolfsteller |
cosmetics.
|
| Wed, 16 Oct 2013 15:25:56 +0200 |
Felix Wolfsteller |
Adjusted i18n to match the one in client.
|
| Wed, 16 Oct 2013 18:48:02 +0200 |
Andre Heinecke |
Use more failsave pattern for SQ-facets.
|
| Wed, 16 Oct 2013 18:46:43 +0200 |
Andre Heinecke |
Configure correct name for SQ-relation C-chart.
|
| Wed, 16 Oct 2013 15:23:04 +0200 |
Felix Wolfsteller |
i18n for total load dc.
|
| Wed, 16 Oct 2013 15:22:18 +0200 |
Felix Wolfsteller |
Offer total loads in dc.
|
| Wed, 16 Oct 2013 15:21:14 +0200 |
Felix Wolfsteller |
Added i18n for upcoming total load via dc.
|
| Wed, 16 Oct 2013 10:42:45 +0200 |
Felix Wolfsteller |
Refactoring: Move functionality of BedHeightAccess into BedHeightFacet for now.
|
| Wed, 16 Oct 2013 10:33:09 +0200 |
Felix Wolfsteller |
Minor BedHeightAccess refactoring.
|
| Wed, 16 Oct 2013 14:43:27 +0200 |
Tom Gottfried |
Remove code that was previously commented out.
|
| Wed, 16 Oct 2013 14:40:19 +0200 |
Tom Gottfried |
BedHeightSingleParser: do not omit lines if last column is empty.
|
| Wed, 16 Oct 2013 13:06:30 +0200 |
Sascha L. Teichmann |
Jim, he's dead.
double-precision
|
| Wed, 16 Oct 2013 13:03:13 +0200 |
Sascha L. Teichmann |
Merged double-precision branch.
|
| Wed, 16 Oct 2013 12:57:40 +0200 |
Sascha L. Teichmann |
Merge branch default
double-precision
|
| Wed, 16 Oct 2013 12:39:33 +0200 |
Sascha L. Teichmann |
Reorder generation of static part of describe document for fast XML DOM handling.
|
| Wed, 16 Oct 2013 12:00:29 +0200 |
Andre Heinecke |
(issue1353) Document that there are more things to syncing then just the Number
|
| Wed, 16 Oct 2013 11:45:23 +0200 |
Andre Heinecke |
(issue1474) Add sqrelation user data and disable filtering for it
|
| Wed, 16 Oct 2013 11:42:53 +0200 |
Andre Heinecke |
Add debug output for variables in user context
|
| Tue, 15 Oct 2013 17:01:20 +0200 |
Andre Heinecke |
Break sometimes when dumping variables. Still ugly but a bit nicer.
|
| Wed, 16 Oct 2013 10:18:19 +0200 |
Tom Gottfried |
Importer doc: fix syntax error.
double-precision
|
| Wed, 16 Oct 2013 09:56:15 +0200 |
Tom Gottfried |
BedHeightSingleParser: do not log every data line in file.
double-precision
|
| Tue, 15 Oct 2013 19:49:25 +0200 |
Tom Gottfried |
Do not log trace of WST-Parser parse exception and document it.
double-precision
|
| Tue, 15 Oct 2013 19:19:45 +0200 |
Tom Gottfried |
WST-Parser: check consistence of station ordering in file.
double-precision
|
| Tue, 15 Oct 2013 19:18:44 +0200 |
Tom Gottfried |
Comments.
double-precision
|
| Tue, 15 Oct 2013 18:41:55 +0200 |
Tom Gottfried |
Merged changes from default into double precision branch.
double-precision
|
| Tue, 15 Oct 2013 18:31:59 +0200 |
Sascha L. Teichmann |
WST Import: Added parse error exception to WST parser.
|
| Tue, 15 Oct 2013 17:39:04 +0200 |
Felix Wolfsteller |
typo fix in doc.
|
| Tue, 15 Oct 2013 17:38:50 +0200 |
Felix Wolfsteller |
BedHeightsArtifact: Use FacetTypes, eliminate local facet type definition.
|
| Tue, 15 Oct 2013 17:31:44 +0200 |
Felix Wolfsteller |
Prepare new facet types for bedheights.
|
| Tue, 15 Oct 2013 16:41:18 +0200 |
Felix Wolfsteller |
i18n for old calculations dc.
|
| Tue, 15 Oct 2013 15:32:36 +0200 |
Tom Gottfried |
Importer manual: use unique revision identifier.
double-precision
|
| Tue, 15 Oct 2013 15:37:54 +0200 |
Felix Wolfsteller |
Add aforementioned user-prototype.
|
| Tue, 15 Oct 2013 15:37:24 +0200 |
Felix Wolfsteller |
Prototypically add longitudinal-section-user-prototype, with issues.
|
| Tue, 15 Oct 2013 15:25:09 +0200 |
Tom Gottfried |
Importer packaging: run pdflatex three times to get references and page numbering right.
double-precision
|
| Tue, 15 Oct 2013 15:06:29 +0200 |
Felix Wolfsteller |
issue1345: Show bedheight_type in tooltip.
|
| Tue, 15 Oct 2013 15:03:51 +0200 |
Felix Wolfsteller |
issue1345: Bring back waterlevel/diffs from fixation into minfo dc element.
|
| Tue, 15 Oct 2013 14:41:39 +0200 |
Felix Wolfsteller |
Fix DC group-by statement, there is no 'oid' variable around.
|
| Tue, 15 Oct 2013 07:06:19 +0200 |
Felix Wolfsteller |
issue1345: DC: group bed heights of single years by year.
|
| Tue, 15 Oct 2013 14:45:46 +0200 |
Tom Gottfried |
Importer: skip historical discharge tables per default as they come via ETL.
double-precision
|
| Tue, 15 Oct 2013 10:11:38 +0200 |
Tom Gottfried |
Add warning on errors when importing duplicates.
double-precision
|
| Mon, 14 Oct 2013 17:41:19 +0200 |
Felix Wolfsteller |
issue1345: Fix sediment load facet type, adjust theme name.
|
| Mon, 14 Oct 2013 17:40:31 +0200 |
Felix Wolfsteller |
have same translations for sediment loads fractions.
|
| Mon, 14 Oct 2013 16:38:16 +0200 |
Sascha L. Teichmann |
Datacage doc ref: Explain dc:group
|
| Mon, 14 Oct 2013 16:06:36 +0200 |
Sascha L. Teichmann |
Datacage ref doc: Explain dc:filter.
|
| Mon, 14 Oct 2013 15:55:36 +0200 |
Sascha L. Teichmann |
Datacage ref doc: Move dc:if & dc:choose up because they are more important than other elements.
|
| Mon, 14 Oct 2013 15:53:06 +0200 |
Sascha L. Teichmann |
Datacage ref doc: Explain dc:for-each
|
| Mon, 14 Oct 2013 15:43:34 +0200 |
Sascha L. Teichmann |
Datacage ref doc: Explain dc:virtual-column.
|
| Mon, 14 Oct 2013 15:27:49 +0200 |
Sascha L. Teichmann |
Datacage ref doc: Explain dc:macro & Co.
|
| Mon, 14 Oct 2013 14:40:51 +0200 |
Sascha L. Teichmann |
Datacage ref doc: Explain dc:variable and dc:convert.
|
| Mon, 14 Oct 2013 13:44:54 +0200 |
Sascha L. Teichmann |
Dataage ref doc: Explain dc:context, dc:comment
|
| Mon, 14 Oct 2013 13:08:33 +0200 |
Sascha L. Teichmann |
Datacage ref doc: More structure. Explain text interpolation.
|
| Mon, 14 Oct 2013 12:16:33 +0200 |
Felix Wolfsteller |
Added sedimentdensity i18n.
|
| Mon, 14 Oct 2013 12:15:34 +0200 |
Felix Wolfsteller |
issue1345: Added getDepth() to SedimentDensityFactory.
|
| Mon, 14 Oct 2013 12:14:20 +0200 |
Felix Wolfsteller |
issue1345: Change Sediment Density Facet label.
|
| Mon, 14 Oct 2013 11:49:15 +0200 |
Felix Wolfsteller |
SedimentDensityProcessor: Fix, use getAllDensities instead of only dens. in year 2006.
|
| Mon, 14 Oct 2013 11:48:38 +0200 |
Felix Wolfsteller |
SedimentDensity: Fix getAllDensities and made it public.
|
| Mon, 14 Oct 2013 10:01:33 +0200 |
Felix Wolfsteller |
i18n for dc and facet name generation.
|
| Mon, 14 Oct 2013 09:55:41 +0200 |
Felix Wolfsteller |
cosmetics.
|
| Mon, 14 Oct 2013 09:53:54 +0200 |
Felix Wolfsteller |
issue1345: Adjust name of sediment yield/load facets to include fraction name and times.
|
| Mon, 14 Oct 2013 09:52:17 +0200 |
Felix Wolfsteller |
issue1345: Prepare SedimentLoadFactory to deliver fraction name and time ranges.
|
| Mon, 14 Oct 2013 09:51:27 +0200 |
Felix Wolfsteller |
cosmetics.
|
| Mon, 14 Oct 2013 07:33:32 +0200 |
Felix Wolfsteller |
Comment in meta-data.xml.
|
| Mon, 14 Oct 2013 07:31:32 +0200 |
Felix Wolfsteller |
cosmetical description fix.
|
| Sat, 12 Oct 2013 10:26:45 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
| Fri, 11 Oct 2013 18:40:33 +0200 |
Andre Heinecke |
(issue1529) Be more tolerant in the fitting.
|
| Fri, 11 Oct 2013 17:11:15 +0200 |
Andre Heinecke |
(issue1529) Only interpolate within a step limit in WQ diagram
|
| Fri, 11 Oct 2013 15:35:25 +0200 |
Andre Heinecke |
Polish SQ Datacage and Facets
|
| Fri, 11 Oct 2013 12:44:25 +0200 |
Felix Wolfsteller |
doc fix <3 .
|
| Fri, 11 Oct 2013 12:40:52 +0200 |
Felix Wolfsteller |
doc fix.
|
| Fri, 11 Oct 2013 12:38:57 +0200 |
Felix Wolfsteller |
Doc typo fix.
|
| Fri, 11 Oct 2013 12:26:00 +0200 |
Felix Wolfsteller |
issue1345: include fix for display of epochs stoptime.
|
| Fri, 11 Oct 2013 12:23:27 +0200 |
Felix Wolfsteller |
issue1512: conf.xml: configure flowvelocitymodel artifact-factory.
|
| Fri, 11 Oct 2013 12:22:40 +0200 |
Felix Wolfsteller |
issue1512: Adde flow-velocity-models dc conf.
|
| Fri, 11 Oct 2013 12:18:38 +0200 |
Felix Wolfsteller |
issue1345: Added accidentally ommitted i18n for sedimentload dc.
|
| Fri, 11 Oct 2013 12:15:01 +0200 |
Felix Wolfsteller |
issue1512: spawn more facets for FlowVelocityMeasurementArtifact .
|
| Fri, 11 Oct 2013 12:12:52 +0200 |
Felix Wolfsteller |
issue1512: Adjusted Q and WOutProcessors to handle data
|
| Fri, 11 Oct 2013 11:44:21 +0200 |
Felix Wolfsteller |
More doc fixes.
|
| Fri, 11 Oct 2013 11:42:56 +0200 |
Felix Wolfsteller |
Processor: Doc.
|
| Fri, 11 Oct 2013 10:30:26 +0200 |
Felix Wolfsteller |
issue1512: Added method to get FlowVelocityModel by id.
|
| Fri, 11 Oct 2013 10:29:37 +0200 |
Felix Wolfsteller |
issue1512: Initial commit of FlowVelocityModelArtifact.
|
| Fri, 11 Oct 2013 10:28:07 +0200 |
Felix Wolfsteller |
issue1512: FlowVelocityCalculation: Opened prepareData(), added doc.
|
| Fri, 11 Oct 2013 10:26:18 +0200 |
Felix Wolfsteller |
issue1512: Added comment, opened constructor as we will reuse this class.
|
| Fri, 11 Oct 2013 10:25:34 +0200 |
Felix Wolfsteller |
issue1512: Prepare new facet types for flow velocity model facet, add comment.
|
| Thu, 10 Oct 2013 18:34:04 +0200 |
Sascha L. Teichmann |
Fixings overview panel: Send valid encoded JSON filters to server part of the client.
|
| Thu, 10 Oct 2013 11:27:56 +0200 |
Felix Wolfsteller |
issue1345: Factored out description creation for loads. Make epochs show end time.
|
| Thu, 10 Oct 2013 11:22:16 +0200 |
Felix Wolfsteller |
issue1345: Added macro for the differing epoch-description, extended query.
|
| Thu, 10 Oct 2013 11:19:30 +0200 |
Felix Wolfsteller |
issue1345: Minor refactoring, made structure for epoch loads equal year loads.
|
| Thu, 10 Oct 2013 11:10:50 +0200 |
Felix Wolfsteller |
issue1345: Show fraction and year for sediment load dc subtree.
|
| Thu, 10 Oct 2013 09:49:01 +0200 |
Felix Wolfsteller |
Revert 7273, add undefined macro to meta-data.xml.
|
| Wed, 09 Oct 2013 17:56:39 +0200 |
Tom Gottfried |
Remove annotations from reference curve recommendations. There is no km-axis.
|
| Wed, 09 Oct 2013 16:33:56 +0200 |
Sascha L. Teichmann |
DC: Remove accidentaly used user-macro from system-content part.
|
| Wed, 09 Oct 2013 16:20:33 +0200 |
Sascha L. Teichmann |
Removed calls to undefined macro.
|
| Wed, 09 Oct 2013 16:19:13 +0200 |
Sascha L. Teichmann |
Removed duplicate macro.
|
| Wed, 09 Oct 2013 16:17:22 +0200 |
Sascha L. Teichmann |
Added check for duplicate macros.
|
| Wed, 09 Oct 2013 13:05:37 +0200 |
Sascha L. Teichmann |
Little workaround not to crash uf there is no theme style. TODO: Figure out why the theme style is null at this point.
|
| Wed, 09 Oct 2013 12:46:40 +0200 |
Tom Gottfried |
fixed typo.
|
| Wed, 09 Oct 2013 12:15:09 +0200 |
Sascha L. Teichmann |
Vollmer curve: Added facet for generating error report.
|
| Wed, 09 Oct 2013 11:20:06 +0200 |
Felix Wolfsteller |
meta-data.xml: Add more entries to discharge datacage ('user-part').
|
| Wed, 09 Oct 2013 10:03:00 +0200 |
Felix Wolfsteller |
meta-data.xml: Let DC show (yet all) computed discharge curves as former calculations.
|
| Wed, 09 Oct 2013 10:01:00 +0200 |
Felix Wolfsteller |
meta-data.xml: Refactored discharge-curve-prototype.
|
| Wed, 09 Oct 2013 09:57:49 +0200 |
Felix Wolfsteller |
meta-data.xml: Add a macro to load previous discharge calculations.
|
| Tue, 08 Oct 2013 15:24:33 +0200 |
Felix Wolfsteller |
BedHeightsArtifact: Import 'river' data, for use in "New Chart"-settings.
|
| Tue, 08 Oct 2013 15:23:51 +0200 |
Felix Wolfsteller |
RangeAccess: Use min/max as from/to in RangeAccess.
|
| Tue, 08 Oct 2013 14:50:58 +0200 |
Felix Wolfsteller |
Refactoring: Let RiverAccess.getRiver return an River.
|
| Tue, 08 Oct 2013 12:07:18 +0200 |
Felix Wolfsteller |
issue1490: Fix text annotations of latest points.
|
| Tue, 08 Oct 2013 11:49:28 +0200 |
Felix Wolfsteller |
issue1490: Translate other points as well, when at gauge.
|
| Tue, 08 Oct 2013 09:26:09 +0200 |
Felix Wolfsteller |
issue1490: Translate text annotations position when displaying w/q- curve at gauge.
|
| Tue, 08 Oct 2013 09:00:45 +0200 |
Felix Wolfsteller |
Minor code simplification.
|
| Mon, 07 Oct 2013 11:13:40 +0200 |
Sascha L. Teichmann |
ETL: Added repair XSLT script to rename value of GEWAESSER attribute 'Untere Havel-Wasserstraße (UHW)' with 'Havel'.
|
| Sun, 06 Oct 2013 15:15:45 +0200 |
Sascha L. Teichmann |
First draft of a german reference document for datacage elements and functions written in reStructuredText. Lots of TODOs.
|
| Sat, 05 Oct 2013 17:52:16 +0200 |
Sascha L. Teichmann |
Reduce usage of careless 'for (int i = 0; i < x.size(); i++)' pattern.
|
| Sat, 05 Oct 2013 12:49:53 +0200 |
Sascha L. Teichmann |
Repaced some tabs by spaces.
|
| Sat, 05 Oct 2013 12:48:44 +0200 |
Sascha L. Teichmann |
Replaced some tabs by spaces. Guys, please configure your editors not to insert tabs!
|
| Sat, 05 Oct 2013 12:19:54 +0200 |
Sascha L. Teichmann |
Removed trailing whitespace.
|
| Sat, 05 Oct 2013 12:17:23 +0200 |
Sascha L. Teichmann |
Removed trailing whitespace.
|
| Sat, 05 Oct 2013 12:16:02 +0200 |
Sascha L. Teichmann |
Remove obsolete same package import.
|
| Sat, 05 Oct 2013 12:13:14 +0200 |
Sascha L. Teichmann |
Removed trailing whitespace.
|
| Sat, 05 Oct 2013 12:06:25 +0200 |
Sascha L. Teichmann |
Remove obsolete import.
|
| Fri, 04 Oct 2013 18:35:05 +0200 |
Andre Heinecke |
Check for inverted setting later.
|
| Fri, 04 Oct 2013 18:33:44 +0200 |
Sascha L. Teichmann |
Code simplification + moved code out of inner loop.
|
| Fri, 04 Oct 2013 18:21:25 +0200 |
Andre Heinecke |
Remove boundToOut facet pass. This is now only done if we filtered before.
|
| Fri, 04 Oct 2013 18:00:29 +0200 |
Andre Heinecke |
Fix SQOverview the new generators need the master artifact set.
|
| Fri, 04 Oct 2013 17:56:02 +0200 |
Andre Heinecke |
Polish labels and remove unused classes. SQOverview is currently broken.
|
| Fri, 04 Oct 2013 17:02:01 +0200 |
Andre Heinecke |
Add new option to diagram axes "logarithmic" that can be set to an evaluator
|
| Fri, 04 Oct 2013 17:00:05 +0200 |
Andre Heinecke |
Add SQRelation Processor
|
| Fri, 04 Oct 2013 16:59:30 +0200 |
Andre Heinecke |
Configure SQ Relations to use new diagram way
|
| Wed, 02 Oct 2013 18:27:14 +0200 |
Andre Heinecke |
Remove SQ Generator Subclasses for A-F
|
| Wed, 02 Oct 2013 18:26:22 +0200 |
Andre Heinecke |
Remove obsolete classes
|
| Wed, 02 Oct 2013 17:04:23 +0200 |
Andre Heinecke |
(issue1474) Add datacage loading for SQ Relations
|
| Tue, 01 Oct 2013 17:10:55 +0200 |
Andre Heinecke |
Silence overly spammy debug output
|
| Fri, 04 Oct 2013 12:16:37 +0200 |
Felix Wolfsteller |
Removed TODO which was already done.
|
| Fri, 04 Oct 2013 11:59:26 +0200 |
Felix Wolfsteller |
issue1345: call longitudinal-section-prototype macro for flow-veloc. DC. Added todo.
|
| Fri, 04 Oct 2013 11:37:50 +0200 |
Felix Wolfsteller |
issue 1345: Let sediment-load dc-config call longitdunal-section-prototype macro.
|
| Fri, 04 Oct 2013 11:11:48 +0200 |
Felix Wolfsteller |
issue1345: Also let bed-quality use longitudinal-section-prototype.
|
| Fri, 04 Oct 2013 10:52:07 +0200 |
Felix Wolfsteller |
issue1345: adjust dc-conf for befheight-diffs: is now longitudinal-section-prototype.
|
| Fri, 04 Oct 2013 07:49:21 +0200 |
Felix Wolfsteller |
issue1345: meta-data.xml: For bedheight_middle, use the longitudinal-section-prototype.
|
| Wed, 02 Oct 2013 23:11:59 +0200 |
Sascha L. Teichmann |
Global facet filtering with bound to out: The DiagramAttributes implements the FacetFilter and not the Generators.
|
| Wed, 02 Oct 2013 19:24:43 +0200 |
Sascha L. Teichmann |
Use diagram configuration and there processors to define compatible facets in loaded data.
|
| Wed, 02 Oct 2013 18:41:12 +0200 |
Sascha L. Teichmann |
Made lookup for generators a class of its own. First step to use it as a compat filter for facets, too.
|
| Wed, 02 Oct 2013 14:14:09 +0200 |
Felix Wolfsteller |
meta-meta.xml: remove debugging info content.
|
| Wed, 02 Oct 2013 14:13:19 +0200 |
Felix Wolfsteller |
issue1345: add flowvelocity-macro to winfo longitudinal-section.
|
| Wed, 02 Oct 2013 11:44:23 +0200 |
Felix Wolfsteller |
issue1435: DC layout for sediment-loads more the way its requested.
|
| Tue, 01 Oct 2013 18:46:30 +0200 |
Tom Gottfried |
WST-parser: making ranges tightly fit was broken since a<b was enforced. Re-enabled.
double-precision
|
| Tue, 01 Oct 2013 18:32:01 +0200 |
Tom Gottfried |
Range importer: Do not allow to set invalid a or b.
double-precision
|
| Tue, 01 Oct 2013 10:06:11 +0200 |
Felix Wolfsteller |
issue1435: For Sediment Density Facets, use densities name/description.
|
| Tue, 01 Oct 2013 10:03:20 +0200 |
Felix Wolfsteller |
issue1435: SedimentDensityFactory: Changed variable name of query to reflect
|
| Tue, 01 Oct 2013 10:01:00 +0200 |
Felix Wolfsteller |
issue1435: Add bedheights and morph. width to LS DC conf.
|
| Tue, 01 Oct 2013 09:50:53 +0200 |
Andre Heinecke |
(issue1353) Document station check and warn message
|
| Tue, 01 Oct 2013 05:58:47 +0200 |
Sascha L. Teichmann |
Bring themes back into sync.
|
| Mon, 30 Sep 2013 17:41:15 +0200 |
Felix Wolfsteller |
Doc.
|
| Mon, 30 Sep 2013 17:40:42 +0200 |
Felix Wolfsteller |
Initial commit of sediment density processor.
|
| Mon, 30 Sep 2013 17:40:04 +0200 |
Felix Wolfsteller |
FlowVelocityGenerator: Simplify code a bit, master and its river is
|
| Mon, 30 Sep 2013 17:38:11 +0200 |
Felix Wolfsteller |
SedimentDensityFactory: query densities by id only (not year).
|
| Mon, 30 Sep 2013 17:36:44 +0200 |
Felix Wolfsteller |
issue1435: Add sedimentyield and sedimentdensity artifact factories to conf.xml.
|
| Mon, 30 Sep 2013 17:35:43 +0200 |
Felix Wolfsteller |
i18n for densities.
|
| Mon, 30 Sep 2013 17:33:29 +0200 |
Felix Wolfsteller |
issue1435: Call densities-macro of meta-data.xml thus show densities in datacage.
|
| Mon, 30 Sep 2013 17:32:47 +0200 |
Felix Wolfsteller |
issue1435: Add densities-macro to meta-data.xml .
|
| Mon, 30 Sep 2013 17:32:04 +0200 |
Felix Wolfsteller |
issue1435: Add SedimentDensityProcessor to longitudinal-diagram-defaults.xml to
|
| Mon, 30 Sep 2013 17:31:10 +0200 |
Felix Wolfsteller |
issue1435: SedimentDensityFacet: Access sediment density data.
|
| Mon, 30 Sep 2013 17:30:48 +0200 |
Felix Wolfsteller |
Cleaned imports.
|
| Mon, 30 Sep 2013 17:30:31 +0200 |
Felix Wolfsteller |
issue1435: Store id of sediment yield only.
|
| Mon, 30 Sep 2013 17:30:06 +0200 |
Felix Wolfsteller |
Cleaned imports.
|
| Mon, 30 Sep 2013 17:29:47 +0200 |
Felix Wolfsteller |
Cleaned imports, added todo about naming.
|
| Mon, 30 Sep 2013 17:29:26 +0200 |
Felix Wolfsteller |
issue1435: Added new sediment.density facet type.
|
| Mon, 30 Sep 2013 17:28:58 +0200 |
Felix Wolfsteller |
issue1435: Add methods to get data in StyledSeriesBuilder-friendly format, doc.
|
| Mon, 30 Sep 2013 09:38:09 +0200 |
Felix Wolfsteller |
issue1435: Stubs for SedimentDensityFacet and -Artifact.
|
| Mon, 30 Sep 2013 09:08:50 +0200 |
Felix Wolfsteller |
issue1435: Prepare SedimentDensityFactory to delive data by sedimentdesity.id and .year.
|
| Mon, 30 Sep 2013 07:40:19 +0200 |
Felix Wolfsteller |
Doc fix.
|
| Mon, 30 Sep 2013 06:58:09 +0200 |
Felix Wolfsteller |
SedimentYieldArtifact: Removed unneeded documentation, removed but added one TODO.
|
| Fri, 27 Sep 2013 22:09:12 +0200 |
Felix Wolfsteller |
issue1435: Remove hardcoded river for dc sediment yield sql query.
|
| Fri, 27 Sep 2013 17:45:18 +0200 |
Tom Gottfried |
Remove method which was accidentally merged back from default.
double-precision
|
| Fri, 27 Sep 2013 17:36:50 +0200 |
Tom Gottfried |
Merged changes from default into double-precision branch.
double-precision
|
| Fri, 27 Sep 2013 16:17:03 +0200 |
Felix Wolfsteller |
Added accidentally omitted i18n.
|
| Fri, 27 Sep 2013 16:13:54 +0200 |
Felix Wolfsteller |
issue1435: In DC conf, show sedimentyields in yield/[year|epoch]- structure, i18n.
|
| Fri, 27 Sep 2013 14:42:03 +0200 |
Felix Wolfsteller |
issue1435: meta-data.xml: Add sedimentload/yield- part to minfo part of dc.
|
| Fri, 27 Sep 2013 14:40:39 +0200 |
Felix Wolfsteller |
SedimentLoadProcessor: Add debug output when handling an out.
|
| Fri, 27 Sep 2013 14:39:46 +0200 |
Felix Wolfsteller |
Doc.
|
| Fri, 27 Sep 2013 14:39:07 +0200 |
Felix Wolfsteller |
StaticState: doc.
|
| Fri, 27 Sep 2013 14:37:28 +0200 |
Felix Wolfsteller |
issue1435: SedimentYieldArtifact: Add functionality.
|
| Fri, 27 Sep 2013 14:36:05 +0200 |
Felix Wolfsteller |
SedimentLoadFactory: Added method to quickly get the description of a given load.
|
| Fri, 27 Sep 2013 14:35:42 +0200 |
Felix Wolfsteller |
SedimentLoadFactory: Fix query, added comment about correctness of
|
| Fri, 27 Sep 2013 12:11:54 +0200 |
Sascha L. Teichmann |
flys/issue1500: The main wst file determines km_up now.
|
| Thu, 26 Sep 2013 22:03:27 +0200 |
Felix Wolfsteller |
Initial commit for untested standalone sediment yield artifact.
|
| Thu, 26 Sep 2013 21:44:53 +0200 |
Felix Wolfsteller |
issue1435: Add method to SedimentLoadFactory to fetch a SedimentLoad by id.
|
| Thu, 26 Sep 2013 21:30:19 +0200 |
Felix Wolfsteller |
issue1435: Minor refactoring that will come handy to load SedimentLoads
|
| Thu, 26 Sep 2013 19:55:49 +0200 |
Andre Heinecke |
Added tag 3.0.16 for changeset 12248d9eb326
|
| Thu, 26 Sep 2013 19:15:17 +0200 |
Andre Heinecke |
Only filter the facets for unbound outs
3.0.16
|
| Thu, 26 Sep 2013 19:14:37 +0200 |
Andre Heinecke |
Fix wrong usage of a_id and add more datacage stuff to WSPL longitundinal
|
| Thu, 26 Sep 2013 19:13:42 +0200 |
Andre Heinecke |
Fix Y-Axis order for default longituidnals
|
| Thu, 26 Sep 2013 19:02:36 +0200 |
Andre Heinecke |
Save target_out in the recommendation to ensure it is sent to the server
|
| Thu, 26 Sep 2013 17:31:25 +0200 |
Tom Gottfried |
Filter waterleveldifferences according to unit.
|
| Thu, 26 Sep 2013 16:18:55 +0200 |
Tom Gottfried |
Filter prefix of descriptions of MINFO-WSTs.
|
| Thu, 26 Sep 2013 16:17:36 +0200 |
Tom Gottfried |
Move MINFO-fixation-stuff to MINFO-datacage and give specified names.
|
| Thu, 26 Sep 2013 13:56:54 +0200 |
Felix Wolfsteller |
issue1435: Group minfo-stuff in dc, include waterlevels from csv.
|
| Thu, 26 Sep 2013 13:02:02 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
| Thu, 26 Sep 2013 12:56:30 +0200 |
Andre Heinecke |
Factor out longitudinal section default config and put it in its own file
|
| Thu, 26 Sep 2013 12:22:22 +0200 |
Andre Heinecke |
Saveguard range access in case an artifact has no range
|
| Thu, 26 Sep 2013 12:22:01 +0200 |
Andre Heinecke |
Add debug output triggered by debugging the last commit
|
| Thu, 26 Sep 2013 12:21:34 +0200 |
Andre Heinecke |
TRUE != FALSE ;)
|
| Thu, 26 Sep 2013 12:21:11 +0200 |
Andre Heinecke |
Add ShearStress Processor
|
| Thu, 26 Sep 2013 10:39:38 +0200 |
Andre Heinecke |
Cosmetics
|
| Thu, 26 Sep 2013 10:39:01 +0200 |
Andre Heinecke |
Handle flow velocity discharge in the new part of the QOutProcessor
|
| Thu, 26 Sep 2013 10:38:21 +0200 |
Andre Heinecke |
Handle flow velocity measurements in the FlowVelocity processor
|
| Thu, 26 Sep 2013 10:37:24 +0200 |
Andre Heinecke |
Handle flow velocity annotation in annoation processor
|
| Thu, 26 Sep 2013 12:56:37 +0200 |
Sascha L. Teichmann |
Diagram attributes: Use evaluators for title arguments, too. This makes it more consistent, powerful and a little bit faster.
|
| Thu, 26 Sep 2013 11:41:02 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
| Thu, 26 Sep 2013 09:59:23 +0200 |
Andre Heinecke |
Use LongitudinalSectionGenerator2 in the LS diagrams.
|
| Thu, 26 Sep 2013 09:58:06 +0200 |
Andre Heinecke |
Add startkm and endkm setting to longitudinal section generator 2
|
| Wed, 25 Sep 2013 18:04:49 +0200 |
Andre Heinecke |
Add NPE guard to XYStyle.
|
| Wed, 25 Sep 2013 18:04:14 +0200 |
Andre Heinecke |
Add FlowVelocity Processor
|
| Wed, 25 Sep 2013 18:03:34 +0200 |
Andre Heinecke |
Configure SedimentLoad to use the new diagram Generator
|
| Wed, 25 Sep 2013 17:40:43 +0200 |
Andre Heinecke |
Add SedimentLoadProcessor
|
| Thu, 26 Sep 2013 08:38:12 +0200 |
Felix Wolfsteller |
Noted insights.
|
| Wed, 25 Sep 2013 16:28:23 +0200 |
Felix Wolfsteller |
issue1493: Also transform NaN X values to empty string.
|
| Wed, 25 Sep 2013 16:01:50 +0200 |
Andre Heinecke |
Configure BedQuality to use new DiagramGenerator
|
| Wed, 25 Sep 2013 16:01:22 +0200 |
Andre Heinecke |
Remove obsolete classes
|
| Wed, 25 Sep 2013 15:57:50 +0200 |
Andre Heinecke |
Add BedQuality Processors
|
| Wed, 25 Sep 2013 15:08:48 +0200 |
Andre Heinecke |
Configure bed_difference_year in the new way
|
| Wed, 25 Sep 2013 15:08:18 +0200 |
Andre Heinecke |
Add label for bed difference axis
|
| Wed, 25 Sep 2013 15:07:41 +0200 |
Andre Heinecke |
Add BedWidthProcessor to handle width facets
|
| Wed, 25 Sep 2013 13:09:45 +0200 |
Andre Heinecke |
Rename BedWidthProcessor to BedHeightSounding processor.
|
| Wed, 25 Sep 2013 12:36:19 +0200 |
Sascha L. Teichmann |
Diagrams: Determine if axis should be inverted dynamically.
|
| Wed, 25 Sep 2013 12:33:22 +0200 |
Andre Heinecke |
Configure BedDiffYear diagram and remove old generator
|
| Wed, 25 Sep 2013 12:23:41 +0200 |
Felix Wolfsteller |
Doc.
|
| Wed, 25 Sep 2013 12:22:46 +0200 |
Felix Wolfsteller |
issue971: Include encoding parameter hardwiredly in csv export panels
|
| Wed, 25 Sep 2013 12:21:45 +0200 |
Felix Wolfsteller |
issue971: Let ExportServiceImpl handle encoding parameter,
|
| Wed, 25 Sep 2013 12:20:49 +0200 |
Felix Wolfsteller |
issue971: For diagram csv export request windows-1252 encoded output.
|
| Wed, 25 Sep 2013 12:20:01 +0200 |
Felix Wolfsteller |
issue971: Prepare client to include encoding in download url.
|
| Wed, 25 Sep 2013 11:48:54 +0200 |
Felix Wolfsteller |
issue971: Let ChartOutputServiceImpl interprete an "encoding" parameter.
|
| Wed, 25 Sep 2013 11:48:10 +0200 |
Felix Wolfsteller |
Doc.
|
| Mon, 23 Sep 2013 11:40:11 +0200 |
Felix Wolfsteller |
Full stop at doc sentence end.
|
| Wed, 25 Sep 2013 11:57:38 +0200 |
Andre Heinecke |
Fix diagram title
|
| Wed, 25 Sep 2013 11:57:08 +0200 |
Andre Heinecke |
Remove obsolete MiddleBedHeightGenerator classes
|
| Wed, 25 Sep 2013 11:53:45 +0200 |
Andre Heinecke |
Configure MiddleBedHeight diagram
|
| Wed, 25 Sep 2013 11:52:05 +0200 |
Andre Heinecke |
Remove wrong docstring
|
| Wed, 25 Sep 2013 11:51:47 +0200 |
Andre Heinecke |
Also handle bed height annotations
|
| Wed, 25 Sep 2013 11:51:22 +0200 |
Andre Heinecke |
Rename BedheightProcessor to BedWidthProcessor
|
| Wed, 25 Sep 2013 11:47:45 +0200 |
Andre Heinecke |
Add axis label to bedheight processor.
|
| Wed, 25 Sep 2013 10:25:10 +0200 |
Andre Heinecke |
Add MiddleBedHeightProcessor
|
| Wed, 25 Sep 2013 10:01:38 +0200 |
Andre Heinecke |
Add dW handling also to the other new longitudinal section diagrams
|
| Tue, 24 Sep 2013 18:37:41 +0200 |
Andre Heinecke |
Configure Longitudinal section diagram to use the new way.
|
| Tue, 24 Sep 2013 18:36:43 +0200 |
Andre Heinecke |
Add currentKM context / request mapping to RiverUtils and use it in DiagramGenerator
|
| Tue, 24 Sep 2013 18:35:21 +0200 |
Andre Heinecke |
Handle multiple processors for axis labeling.
|
| Tue, 24 Sep 2013 18:33:30 +0200 |
Andre Heinecke |
Cosmetics
|
| Tue, 24 Sep 2013 18:32:55 +0200 |
Andre Heinecke |
Add DeltaWProcessor to process data for a delta W axis.
|
| Tue, 24 Sep 2013 18:13:51 +0200 |
Andre Heinecke |
Fix area label rendering.
|
| Tue, 24 Sep 2013 16:23:18 +0200 |
Sascha L. Teichmann |
Removed obsolete imports. Minor code cosmetics.
|
| Tue, 24 Sep 2013 12:32:08 +0200 |
Andre Heinecke |
Close generator-refactoring
generator-refactoring
|
| Tue, 24 Sep 2013 12:29:44 +0200 |
Andre Heinecke |
Merge branch generator-refectoring into default.
|
| Tue, 24 Sep 2013 12:25:36 +0200 |
Andre Heinecke |
Migrate w_differences and remove unused classes
generator-refactoring
|
| Tue, 24 Sep 2013 11:43:21 +0200 |
Andre Heinecke |
Actually commit the canHandle part of the last revision. (WQCKms in WOut proc.)
generator-refactoring
|
| Tue, 24 Sep 2013 11:42:04 +0200 |
Andre Heinecke |
Process corrected WQkms (WQCKms) also in the WOutProcessor
generator-refactoring
|
| Tue, 24 Sep 2013 11:40:43 +0200 |
Andre Heinecke |
Fix applying the inversion of diagrams.
generator-refactoring
|
| Tue, 24 Sep 2013 11:38:07 +0200 |
Andre Heinecke |
Migrate discharge_longitudinal_section generator to the new architecture.
generator-refactoring
|
| Tue, 24 Sep 2013 11:30:06 +0200 |
Andre Heinecke |
Reactivate CALCULATION_DISCHARGE_LONGITUDINAL_CURVE
generator-refactoring
|
| Tue, 24 Sep 2013 11:29:18 +0200 |
Andre Heinecke |
Also handle subtypes of Discharge longitundial Q facets.
generator-refactoring
|
| Tue, 24 Sep 2013 11:28:29 +0200 |
Andre Heinecke |
Default to the label of longitundial Q axis in the QProcessor
generator-refactoring
|
| Tue, 24 Sep 2013 11:27:28 +0200 |
Andre Heinecke |
Handle axis include zero setting for the new processing architecture
generator-refactoring
|
| Tue, 24 Sep 2013 11:26:45 +0200 |
Andre Heinecke |
Minor cleanup / doc
generator-refactoring
|
| Mon, 23 Sep 2013 16:41:12 +0200 |
Andre Heinecke |
Add refactored LongitudinalSectionGenerator2 that inherits DiagramGenerator
generator-refactoring
|
| Mon, 23 Sep 2013 16:00:02 +0200 |
Andre Heinecke |
Add more Inversion logic to the DiagramGenerator
generator-refactoring
|
| Mon, 23 Sep 2013 15:55:09 +0200 |
Andre Heinecke |
Add AxisLabel handling to WDiffProcessor
generator-refactoring
|
| Mon, 23 Sep 2013 15:46:05 +0200 |
Andre Heinecke |
Add WDiffProcessor
generator-refactoring
|
| Mon, 23 Sep 2013 15:30:46 +0200 |
Andre Heinecke |
Add AreaProcessor
generator-refactoring
|
| Mon, 23 Sep 2013 16:08:04 +0200 |
Sascha L. Teichmann |
Added diagram attributes as converter to longitudinal section diagrams.
generator-refactoring
|
| Mon, 23 Sep 2013 12:28:22 +0200 |
Sascha L. Teichmann |
Use pre-converted diagram attributes now.
generator-refactoring
|
| Mon, 23 Sep 2013 12:21:59 +0200 |
Andre Heinecke |
Fix domain axis label and add manualpoints processor to config
generator-refactoring
|
| Mon, 23 Sep 2013 12:21:08 +0200 |
Andre Heinecke |
Move manual point handling into a Processor
generator-refactoring
|
| Mon, 23 Sep 2013 12:20:27 +0200 |
Andre Heinecke |
Add useful debug output for diagram generator debugging
generator-refactoring
|
| Mon, 23 Sep 2013 11:37:13 +0200 |
Felix Wolfsteller |
issue1493: Don't let NaNs slip through csv export.
|
| Mon, 23 Sep 2013 11:24:17 +0200 |
Felix Wolfsteller |
Minor refactoring for 1493.
|
| Mon, 23 Sep 2013 10:24:47 +0200 |
Andre Heinecke |
Add DiagramGenerator doOut function
generator-refactoring
|
| Mon, 23 Sep 2013 10:23:21 +0200 |
Andre Heinecke |
Add DiagramGenerator doOut function
generator-refactoring
|
| Mon, 23 Sep 2013 10:22:52 +0200 |
Andre Heinecke |
Simplify code to prepare DiagramGenerator signature
generator-refactoring
|
| Mon, 23 Sep 2013 10:21:59 +0200 |
Andre Heinecke |
Add more proessors to longitudinal diagram
generator-refactoring
|
| Mon, 23 Sep 2013 09:25:04 +0200 |
Andre Heinecke |
Remove accidental commited debug line
generator-refactoring
|
| Sun, 22 Sep 2013 21:29:35 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
generator-refactoring
|
| Sun, 22 Sep 2013 21:05:12 +0200 |
Sascha L. Teichmann |
Use Object instead of DOM Element as argument for setup of out generators. First step to remove dependency to XML DOM when using configuration.
generator-refactoring
|
| Sun, 22 Sep 2013 17:15:15 +0200 |
Sascha L. Teichmann |
Little workaround to make diagram attribute parsing more thread safe. This is not the right solution.
generator-refactoring
|
| Sun, 22 Sep 2013 17:07:17 +0200 |
Sascha L. Teichmann |
Moved generators to separate xml file.
generator-refactoring
|
| Fri, 20 Sep 2013 19:18:04 +0200 |
Andre Heinecke |
Implement Label handling
generator-refactoring
|
| Fri, 20 Sep 2013 19:17:49 +0200 |
Andre Heinecke |
Add info generator for refactored generators
generator-refactoring
|
| Fri, 20 Sep 2013 17:58:30 +0200 |
Andre Heinecke |
Remove generator2 hacks
generator-refactoring
|
| Fri, 20 Sep 2013 17:36:11 +0200 |
Andre Heinecke |
Simplyfy / unify "invert axis" logic
generator-refactoring
|
| Fri, 20 Sep 2013 17:04:37 +0200 |
Sascha L. Teichmann |
Removed faked ChartInfoGenerator2 and LS Info generator.
generator-refactoring
|
| Fri, 20 Sep 2013 17:00:59 +0200 |
Sascha L. Teichmann |
ChartGenerator2 can be used as ChartInfoGenerator, too.
generator-refactoring
|
| Fri, 20 Sep 2013 16:34:37 +0200 |
Sascha L. Teichmann |
Merged
generator-refactoring
|
| Fri, 20 Sep 2013 16:34:09 +0200 |
Sascha L. Teichmann |
Extended init() of OutGenerator to take name of the out to serve.
generator-refactoring
|
| Fri, 20 Sep 2013 16:33:22 +0200 |
Andre Heinecke |
Add LTR inversion code to diagram generator.
generator-refactoring
|
| Fri, 20 Sep 2013 16:25:43 +0200 |
Andre Heinecke |
More Processor refactoring
generator-refactoring
|
| Fri, 20 Sep 2013 15:44:39 +0200 |
Sascha L. Teichmann |
Trim "names" and "class" attribute of out generators before using.
generator-refactoring
|
| Fri, 20 Sep 2013 15:42:21 +0200 |
Sascha L. Teichmann |
Allow comma separated names in "names" attribute in out generators to allow registering for more than one name. Old "name" attribute is removed.
generator-refactoring
|
| Fri, 20 Sep 2013 15:29:02 +0200 |
Sascha L. Teichmann |
Read out generator class info from "class" attribute instead of tags text body.
generator-refactoring
|
| Fri, 20 Sep 2013 14:59:00 +0200 |
Andre Heinecke |
Use DiagramGenerator for longitudinal section.
generator-refactoring
|
| Fri, 20 Sep 2013 14:57:26 +0200 |
Andre Heinecke |
Add NPE guard
generator-refactoring
|
| Fri, 20 Sep 2013 14:56:46 +0200 |
Andre Heinecke |
Add InfoGenerator Hacks to be removed soon.
generator-refactoring
|
| Fri, 20 Sep 2013 14:55:44 +0200 |
Andre Heinecke |
Remove Axis Walker, unabstract Diagram generator
generator-refactoring
|
| Fri, 20 Sep 2013 14:54:26 +0200 |
Andre Heinecke |
Add second doOut implementations to work with diagram generator
generator-refactoring
|
| Fri, 20 Sep 2013 14:22:44 +0200 |
Felix Wolfsteller |
issue1494: Spawn Q facet only if Q data is there.
|
| Thu, 19 Sep 2013 12:53:11 +0200 |
Felix Wolfsteller |
Simplify code a bit.
|
| Thu, 19 Sep 2013 12:52:06 +0200 |
Felix Wolfsteller |
Doc, comment.
|
| Fri, 20 Sep 2013 13:11:22 +0200 |
Tom Gottfried |
Close branch longitudinal-symmetry. Diagram refactoring is now done in branch generator-refactoring.
longitudinal-symmetry
|
| Fri, 20 Sep 2013 12:35:14 +0200 |
Sascha L. Teichmann |
Added 'include-zero' attribute to <axis> tag in diagram configuration.
generator-refactoring
|
| Fri, 20 Sep 2013 12:28:15 +0200 |
Sascha L. Teichmann |
Added domain axis title to diagram attributes.
generator-refactoring
|
| Fri, 20 Sep 2013 12:04:14 +0200 |
Andre Heinecke |
Some more accessors and typo fix
generator-refactoring
|
| Fri, 20 Sep 2013 10:30:03 +0200 |
Andre Heinecke |
Remove AxisProcessor "glue" class and extend Processor interface
generator-refactoring
|
| Fri, 20 Sep 2013 10:29:14 +0200 |
Andre Heinecke |
Fix indention / line length
generator-refactoring
|
| Fri, 20 Sep 2013 09:55:17 +0200 |
Andre Heinecke |
Add Default Processor implementation and make processors inherit it.
generator-refactoring
|
| Thu, 19 Sep 2013 17:08:02 +0200 |
Tom Gottfried |
Remove obsolete configuration of DGM-SRID.
|
| Thu, 19 Sep 2013 16:27:33 +0200 |
Sascha L. Teichmann |
DGM SRIds are now fetched from database instead of configuration.
|
| Thu, 19 Sep 2013 12:51:30 +0200 |
Felix Wolfsteller |
issue1436: Repair sedimentload epoch calculation,
|
| Thu, 19 Sep 2013 10:39:15 +0200 |
Felix Wolfsteller |
Corrected debug output.
|
| Thu, 19 Sep 2013 11:50:36 +0200 |
Sascha L. Teichmann |
Call processors from configuration.
generator-refactoring
|
| Thu, 19 Sep 2013 11:39:00 +0200 |
Sascha L. Teichmann |
Parse config when setup a new diagram.
generator-refactoring
|
| Thu, 19 Sep 2013 11:29:35 +0200 |
Andre Heinecke |
Add annotationProcessor
generator-refactoring
|
| Thu, 19 Sep 2013 11:08:43 +0200 |
Sascha L. Teichmann |
Added alignment rules for diagrams.
generator-refactoring
|
| Thu, 19 Sep 2013 10:57:47 +0200 |
Sascha L. Teichmann |
Simple interpolation logic for diagram titles and subtitles.
generator-refactoring
|
| Thu, 19 Sep 2013 09:16:52 +0200 |
Felix Wolfsteller |
issue1493: Use other numberformat for csv data from diagram.
|
| Wed, 18 Sep 2013 18:40:52 +0200 |
Felix Wolfsteller |
issue971: Bring a formatter in (a bad) place.
|
| Wed, 18 Sep 2013 14:15:14 +0200 |
Felix Wolfsteller |
issue971: Use ";" as CSV separator also in ChartExportHelper, with the
|
| Wed, 18 Sep 2013 17:13:17 +0200 |
Andre Heinecke |
Add DiagramGenerator which should mainly replace xygenerator
generator-refactoring
|
| Wed, 18 Sep 2013 17:12:13 +0200 |
Andre Heinecke |
Factor out annotation handling code
generator-refactoring
|
| Wed, 18 Sep 2013 16:26:12 +0200 |
Sascha L. Teichmann |
Fixed typo.
generator-refactoring
|
| Wed, 18 Sep 2013 16:21:07 +0200 |
Andre Heinecke |
Correct group for jfreechart
generator-refactoring
|
| Wed, 18 Sep 2013 16:20:59 +0200 |
Sascha L. Teichmann |
Added first version of diagram attribute parser.
generator-refactoring
|
| Wed, 18 Sep 2013 16:05:56 +0200 |
Andre Heinecke |
Update jfreechart dependency to 1.0.15
generator-refactoring
|
| Wed, 18 Sep 2013 15:44:49 +0200 |
Andre Heinecke |
Use combine instead of combineignoringNaN (for compatibility)
generator-refactoring
|
| Wed, 18 Sep 2013 15:04:26 +0200 |
Sascha L. Teichmann |
Add setup(Element config) method to Generator interface to be initialized from configuration.
generator-refactoring
|
| Wed, 18 Sep 2013 12:25:05 +0200 |
Felix Wolfsteller |
issue971: Change CSV column separator to ";".
|
| Wed, 18 Sep 2013 12:24:33 +0200 |
Felix Wolfsteller |
issue971: Change CSV column separator to ";" for Exports, client-side change follows.
|
| Wed, 18 Sep 2013 10:12:47 +0200 |
Andre Heinecke |
Combine AxisDataset implementations and remove / simplify handling code.
generator-refactoring
|
| Tue, 17 Sep 2013 16:49:37 +0200 |
Andre Heinecke |
Add a copy of the ChartGenerator class.
generator-refactoring
|
| Tue, 17 Sep 2013 15:34:28 +0200 |
Andre Heinecke |
(issue1023) We do not support html getfeatureinfo
|
| Tue, 17 Sep 2013 11:45:44 +0200 |
Felix Wolfsteller |
Doc.
|
| Tue, 17 Sep 2013 09:43:27 +0200 |
Felix Wolfsteller |
WDifferencesState: Remove empty constructor.
|
| Tue, 17 Sep 2013 09:31:33 +0200 |
Felix Wolfsteller |
issue1470: Make validate of WDifferencesState return true if in "new chart".
|
| Mon, 16 Sep 2013 17:30:14 +0200 |
Felix Wolfsteller |
Doc.
|
| Mon, 16 Sep 2013 17:29:16 +0200 |
Felix Wolfsteller |
Doc.
|
| Mon, 16 Sep 2013 17:28:34 +0200 |
Felix Wolfsteller |
Cosmetics, typo fix in comment.
|
| Mon, 16 Sep 2013 17:26:16 +0200 |
Felix Wolfsteller |
Cosmetics.
|
| Mon, 16 Sep 2013 17:11:16 +0200 |
Andre Heinecke |
Added tag 3.0.15 for changeset a18a43764793
|
| Mon, 16 Sep 2013 16:18:01 +0200 |
Felix Wolfsteller |
issue1235: Do not add 'other' values twice to suspended sed. values, fix range.
3.0.15
|
| Mon, 16 Sep 2013 15:11:02 +0200 |
Felix Wolfsteller |
Doc.
|
| Mon, 16 Sep 2013 15:45:51 +0200 |
Andre Heinecke |
Fix syntax error on oracle by removing unused paramater
|
| Mon, 16 Sep 2013 15:30:06 +0200 |
Andre Heinecke |
(issue1071) Change format for paramter a again
|
| Mon, 16 Sep 2013 12:51:22 +0200 |
Andre Heinecke |
(Issue 1353): Add warning when a gauge is skipped because of station
|
| Mon, 16 Sep 2013 09:52:28 +0200 |
Felix Wolfsteller |
issue1465: Assume that a "0" measurement for total sediment load is
|
| Mon, 16 Sep 2013 09:17:33 +0200 |
Felix Wolfsteller |
issue1157: Fix sorting by start time (descending) for cross-section selection.
|
| Fri, 13 Sep 2013 18:29:01 +0200 |
Tom Gottfried |
Schema change: increase precision of gauges.station to be able to hold nearby gauges.
double-precision
|
| Fri, 13 Sep 2013 17:42:09 +0200 |
Sascha L. Teichmann |
Fixed misuse of x !=/== Double.NaN
|
| Fri, 13 Sep 2013 16:10:10 +0200 |
Felix Wolfsteller |
issue1465: Adjust to new use of NaN instead of 0.
|
| Fri, 13 Sep 2013 16:07:46 +0200 |
Felix Wolfsteller |
issue1465: Do not allow null ranges for fraction values, logger.error instead.
|
| Fri, 13 Sep 2013 16:03:05 +0200 |
Felix Wolfsteller |
issue1465: Initialize sediment load fraction values with NaN instead of 0,
|
| Fri, 13 Sep 2013 16:01:11 +0200 |
Felix Wolfsteller |
issue1465: Show space instead of '-' in table results view.
|
| Fri, 13 Sep 2013 15:30:17 +0200 |
Sascha L. Teichmann |
Typo fix.
|
| Fri, 13 Sep 2013 15:24:07 +0200 |
Sascha L. Teichmann |
Another tweak for flys/issue1353: Be more tolerant about river names.
|
| Fri, 13 Sep 2013 12:28:13 +0200 |
Tom Gottfried |
make_release.sh: default DGM_PATH to path on poland.
|
| Fri, 13 Sep 2013 12:30:42 +0200 |
Felix Wolfsteller |
issue1465: Prepare SedimentLoadExporter to show "-" for NaN-values.
|
| Fri, 13 Sep 2013 12:02:40 +0200 |
Sascha L. Teichmann |
Fix for flys/issue1479: Really iterate over the FLYS river not over empty list.
|
| Thu, 12 Sep 2013 21:12:59 +0200 |
Tom Gottfried |
SCHEMA CHANGE: a < b now enforced on ranges.
double-precision
|
| Thu, 12 Sep 2013 19:15:07 +0200 |
Tom Gottfried |
DGM-importer: enforce a < b for ranges.
double-precision
|
| Thu, 12 Sep 2013 18:58:19 +0200 |
Tom Gottfried |
Range import: enforce a<b not only for WSTs and set only a for zero-length ranges.
double-precision
|
| Thu, 12 Sep 2013 18:43:21 +0200 |
Tom Gottfried |
Issue1333: expand single-line i.e. 0-lenght Q-range to minimal length.
double-precision
|
| Fri, 30 Aug 2013 17:31:20 +0200 |
Tom Gottfried |
Minor schema change: allow to delete ranges with associated DEMs.
double-precision
|
| Thu, 12 Sep 2013 18:04:48 +0200 |
Sascha L. Teichmann |
Fix for flys/issue1018: Sort the pairs of (q, w) in q before creating a spline also in case of non interpolation.
|
| Thu, 12 Sep 2013 16:35:07 +0200 |
Sascha L. Teichmann |
Fix for flys/issue1479: The indices of the dates of the analysis periods where re-mapped wrong.
|
| Thu, 12 Sep 2013 11:50:39 +0200 |
Felix Wolfsteller |
issue1472: Remove commented code.
|
| Thu, 12 Sep 2013 11:33:26 +0200 |
Felix Wolfsteller |
issue1472: Do not guess flow direction from differences.
|
| Thu, 12 Sep 2013 10:15:18 +0200 |
Tom Gottfried |
LocationDistancePanel error messages: do not imply calculation in the direction of kilometrage.
|
| Thu, 12 Sep 2013 10:13:09 +0200 |
Tom Gottfried |
merged accidental head (nothing changed)
|
| Thu, 12 Sep 2013 09:46:35 +0200 |
Felix Wolfsteller |
issue1378: Adjust style for flood-protection annotation values at y axis.
|
| Wed, 11 Sep 2013 17:04:06 +0200 |
Bernhard Reiter |
Closing branch 'dc-km-filter', should already be integrated in default (but not tracked by hg).
dc-km-filter
|
| Wed, 11 Sep 2013 16:04:14 +0200 |
Bernhard Reiter |
(issue1023) mapserver templates mapfile.vm, wsplgen_layer.vm explicitely adding the three projects, so that mapserver offers the in the capabilities.
|
| Wed, 11 Sep 2013 15:40:51 +0200 |
Bernhard Reiter |
Closing inaktive branch "dc-km-filter-rr".
dc-km-filter-rr
|
| Wed, 11 Sep 2013 15:37:05 +0200 |
Bernhard Reiter |
Closing inactive branch.
facets-slt
|
| Wed, 11 Sep 2013 15:30:38 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
| Wed, 11 Sep 2013 13:15:30 +0200 |
Sascha L. Teichmann |
flys/issue1485 Better titles for UESK layers.
|
| Wed, 11 Sep 2013 11:41:29 +0200 |
Bernhard Reiter |
Closing branch 'interaktive-karte', the contents must have been merged (without hg tracking it) to default long ago because it is in there.
interaktive-karte
|
| Wed, 11 Sep 2013 11:41:29 +0200 |
Sascha L. Teichmann |
GWT client: Do not assumed there is always a SAML ticket when generating Wiki links.
|
| Wed, 11 Sep 2013 09:59:00 +0200 |
Felix Wolfsteller |
issue1465: Removed fix for non-matching measurement station and stations range.
|
| Wed, 11 Sep 2013 09:46:11 +0200 |
Felix Wolfsteller |
Backed out changeset 6b9402377d07
|
| Tue, 10 Sep 2013 17:48:48 +0200 |
Sascha L. Teichmann |
flys/issue1417 Be more fault tolerant if a river has no flood plain.
|
| Tue, 10 Sep 2013 15:22:59 +0200 |
Felix Wolfsteller |
issue1378: For additionals and basedata via datacage for
|
| Tue, 10 Sep 2013 11:49:01 +0200 |
Felix Wolfsteller |
issue1457: Handle symbolic discharge of -1 as 'no discharge'.
|
| Mon, 09 Sep 2013 16:05:31 +0200 |
Felix Wolfsteller |
Doc.
|
| Tue, 10 Sep 2013 09:42:34 +0200 |
Bernhard Reiter |
mapserver templates for flys.map and rivers.map: correcting the wms_onlineresource URL to partly help (issue1023)
|
| Mon, 09 Sep 2013 18:22:47 +0200 |
Sascha L. Teichmann |
Fix for Browser and server running both on localhost. Previously all requests from localhost where accepted w/o auth. Now they are only accepted when a HTTP header X_NO_GGINA_AUTH=TRUE is send, too. This is ddone when printing maps.
|
| Fri, 06 Sep 2013 15:48:46 +0200 |
Felix Wolfsteller |
Corrected doc.
|
| Fri, 06 Sep 2013 15:44:02 +0200 |
Felix Wolfsteller |
D4EArtifactCollection: Do not push CallContext and reference to db around.
|
| Fri, 06 Sep 2013 15:40:38 +0200 |
Felix Wolfsteller |
Doc.
|
| Fri, 06 Sep 2013 15:37:56 +0200 |
Felix Wolfsteller |
Doc.
|
| Fri, 06 Sep 2013 15:36:59 +0200 |
Felix Wolfsteller |
Doc.
|
| Fri, 06 Sep 2013 12:37:42 +0200 |
Felix Wolfsteller |
Correct SedimentLoadExporters compilability-fix.
|
| Thu, 05 Sep 2013 19:05:00 +0200 |
Tom Gottfried |
Make EpsilonComparator serializable.
|
| Thu, 05 Sep 2013 17:15:04 +0200 |
Sascha L. Teichmann |
flys/issue1235: Same kicks against a few inconsistencies and bugs in the calculation of sediment loads. I believe it _do_not_ delivers the right results.
|
| Thu, 05 Sep 2013 15:47:24 +0200 |
Felix Wolfsteller |
Doc.
|
| Thu, 05 Sep 2013 15:46:57 +0200 |
Felix Wolfsteller |
issue1465: Fetch correct measurement station (also if the km does not
|
| Thu, 05 Sep 2013 15:31:58 +0200 |
Felix Wolfsteller |
SedimentLoadFactory: Improved readability.
|
| Thu, 05 Sep 2013 15:28:59 +0200 |
Felix Wolfsteller |
SedimentLoadFactory: Further code simplification.
|
| Thu, 05 Sep 2013 15:27:56 +0200 |
Felix Wolfsteller |
SedimentLoadFactory: Minor simplification.
|
| Thu, 05 Sep 2013 15:23:54 +0200 |
Felix Wolfsteller |
SedimentLoadFactory: Extracted method to find range of matching
|
| Thu, 05 Sep 2013 11:48:38 +0200 |
Felix Wolfsteller |
SedimentLoadExporter: Minor refac. Determine a displayed string
|
| Wed, 04 Sep 2013 10:53:53 +0200 |
Sascha L. Teichmann |
Workaround for flys/issue14070. TODO: Find the reason why a null document is given to the ThemeDocument.
|
| Tue, 03 Sep 2013 21:51:58 +0200 |
Felix Wolfsteller |
issue1458: Avoid facet duplicates.
|
| Tue, 03 Sep 2013 21:50:23 +0200 |
Felix Wolfsteller |
Implement ManagedFacet.isSame to determine whether two facets are the same.
|
| Tue, 03 Sep 2013 21:49:30 +0200 |
Felix Wolfsteller |
Added new CompareUtil (singleton Helper class).
|
| Tue, 03 Sep 2013 10:33:38 +0200 |
Felix Wolfsteller |
AttributeWriter: Even better variable name.
|
| Tue, 03 Sep 2013 10:31:26 +0200 |
Felix Wolfsteller |
AttributeWriter: Slightly improved variable naming and comments.
|
| Fri, 30 Aug 2013 16:30:54 +0200 |
Felix Wolfsteller |
Added loadTotalRange getter.
|
| Fri, 30 Aug 2013 15:45:14 +0200 |
Andre Heinecke |
(issue1452) Coalesce to zero to avoid NaN arithmetic.
|
| Fri, 30 Aug 2013 12:32:08 +0200 |
Andre Heinecke |
(issue1023) Start returning more useful information
|
| Fri, 30 Aug 2013 12:33:50 +0200 |
Felix Wolfsteller |
issue1462/3: When changing units (t/a -> m^3/a), also change total load.
|
| Fri, 30 Aug 2013 12:32:29 +0200 |
Felix Wolfsteller |
SedimentLoad: Allow to set range of total load.
|
| Fri, 30 Aug 2013 12:31:33 +0200 |
Felix Wolfsteller |
Doc fix.
|
| Fri, 30 Aug 2013 12:30:51 +0200 |
Felix Wolfsteller |
SedimentLoadCalculation: Log an error on unknown mode.
|
| Fri, 30 Aug 2013 09:48:11 +0200 |
Felix Wolfsteller |
issue1462: 1) & 4) Fix wrong density interpolation code.
|
| Fri, 30 Aug 2013 09:47:15 +0200 |
Felix Wolfsteller |
Cosmetics, docs.
|
| Fri, 30 Aug 2013 09:45:04 +0200 |
Felix Wolfsteller |
Cosmetics.
|
| Fri, 30 Aug 2013 09:44:44 +0200 |
Felix Wolfsteller |
Doc.
|
| Thu, 29 Aug 2013 16:37:53 +0200 |
Felix Wolfsteller |
Let hibernate do the parsing/casting.
|
| Thu, 29 Aug 2013 16:33:43 +0200 |
Felix Wolfsteller |
issue957: Better name for flowvelocity measured values facets.
|
| Thu, 29 Aug 2013 12:15:28 +0200 |
Felix Wolfsteller |
Assign theme to flowvelocitymeasurementvaluefacets.
|
| Thu, 29 Aug 2013 12:15:05 +0200 |
Felix Wolfsteller |
Slightly better name for flowvelocitymeasurementvaluefacets.
|
| Thu, 29 Aug 2013 11:28:55 +0200 |
Andre Heinecke |
(issue1451) Round Q's in the way it is done for AT's and localize KM
|
| Thu, 29 Aug 2013 11:33:30 +0200 |
Felix Wolfsteller |
issue1466: Fix, sort stations before gap detection.
|
| Thu, 29 Aug 2013 09:14:53 +0200 |
Felix Wolfsteller |
DischargeCurveGenerator: Prevent NPE when no gauge can be found.
|
| Wed, 28 Aug 2013 12:02:56 +0200 |
Felix Wolfsteller |
issue1436: Exploit validity-rule of sedimentdensities.
|
| Wed, 28 Aug 2013 11:55:14 +0200 |
Felix Wolfsteller |
issue1436: Towards finding the best match in years for densities.
|
| Wed, 28 Aug 2013 11:22:40 +0200 |
Felix Wolfsteller |
issue1460: prevent NPEs when backstepping and changing Q values for WINFO
|
| Wed, 28 Aug 2013 10:54:21 +0200 |
Tom Gottfried |
Importer Doc: be clearer on DEM-metadata import.
double-precision
|
| Tue, 27 Aug 2013 12:32:48 +0200 |
Tom Gottfried |
Importer doc: added remark considering re-import of modified data
double-precision
|
| Tue, 27 Aug 2013 19:14:12 +0200 |
Sascha L. Teichmann |
Datacage: Add dc:all-state-successors() to enable predicates like dc:contains(dc:all-state-successors($artifact-name, $current-state-id), 'state.winfo.calculation_mode') which recursively collects all successor state ids an check for containment.
|
| Tue, 27 Aug 2013 18:37:24 +0200 |
Andre Heinecke |
(issue1451) Use distinct values for single_wq mode filtering instead of ranges.
|
| Tue, 27 Aug 2013 18:35:51 +0200 |
Andre Heinecke |
Fix NPE in case the artifact does not even have the master attribute
|
| Tue, 27 Aug 2013 16:16:13 +0200 |
Felix Wolfsteller |
DischargeLongitudinalSectionGenerator: Use QOutProcessor, fix compilation.
|
| Tue, 27 Aug 2013 16:15:45 +0200 |
Felix Wolfsteller |
Let QOutProcessor also handle Discharge/Q-data.
|
| Tue, 27 Aug 2013 14:58:03 +0200 |
Felix Wolfsteller |
SedimentLoadCalculation: Refactoring, extracted method.
|
| Tue, 27 Aug 2013 12:46:11 +0200 |
Felix Wolfsteller |
issue1455: Extract QOutProcessor, use it
|
| Tue, 27 Aug 2013 11:35:37 +0200 |
Felix Wolfsteller |
issue1455: Prepare MiddleBedHeightDiagram to show Q values.
|
| Mon, 26 Aug 2013 15:35:39 +0200 |
Felix Wolfsteller |
WQKmsInterpolArtifact: Add different facet if wst has only 'fake' Qs.
|
| Mon, 26 Aug 2013 15:34:46 +0200 |
Felix Wolfsteller |
Doc, cosmetics.
|
| Mon, 26 Aug 2013 15:32:57 +0200 |
Felix Wolfsteller |
WstValueTable: Add method to find out wether the Qs are 'fake'
|
| Mon, 26 Aug 2013 15:28:46 +0200 |
Felix Wolfsteller |
DischargeProcessor: Handle interpolated w values
|
| Mon, 26 Aug 2013 15:24:21 +0200 |
Felix Wolfsteller |
Cosmetics, added @Override annotation, vim line.
|
| Mon, 26 Aug 2013 15:23:46 +0200 |
Felix Wolfsteller |
Doc.
|
| Mon, 26 Aug 2013 15:03:37 +0200 |
Felix Wolfsteller |
Added new Theme.
|
| Mon, 26 Aug 2013 15:02:52 +0200 |
Felix Wolfsteller |
Added new ThemeMappings.
|
| Mon, 26 Aug 2013 15:01:34 +0200 |
Felix Wolfsteller |
Mapping new facet type to theme.
|
| Mon, 26 Aug 2013 14:53:41 +0200 |
Felix Wolfsteller |
Added new facet type to gaugedischargecurve.xml compat matrix.
|
| Mon, 26 Aug 2013 14:40:53 +0200 |
Felix Wolfsteller |
FacetTypes: Added new type other.w.interpol .
|
| Mon, 26 Aug 2013 14:28:19 +0200 |
Felix Wolfsteller |
Minor refactoring, renamed variable, extracted method.
|
| Thu, 22 Aug 2013 14:58:56 +0200 |
Felix Wolfsteller |
Typo fix in debug message.
|
| Fri, 23 Aug 2013 14:37:54 +0200 |
Sascha L. Teichmann |
Artifacts: ThemeDocument. More debug output. Make more getters private to only expose the parsed values.
|
| Fri, 23 Aug 2013 14:17:35 +0200 |
Sascha L. Teichmann |
Artifacts: Make TextStyle Make more robust.
|
| Fri, 23 Aug 2013 12:57:21 +0200 |
Tom Gottfried |
a bit of debug output
|
| Fri, 23 Aug 2013 11:39:24 +0200 |
Sascha L. Teichmann |
Artifacts: ThemeDocument. Removed some zero length checks because we do not store zero length strings in the backing map.
|
| Fri, 23 Aug 2013 11:07:11 +0200 |
Sascha L. Teichmann |
Artifacts: ThemeDocument. The bloody part: Removal of the XPaths. Now the theme XML document is scanned once(!) at construction time for field values and the resulting key/value pairs are store in a map.
|
| Fri, 23 Aug 2013 01:17:13 +0200 |
Sascha L. Teichmann |
Artifacts: Removed ThemeUtil.
|
| Fri, 23 Aug 2013 01:16:13 +0200 |
Sascha L. Teichmann |
Artifacts: Moved logic of ThemeUtils into ThemeDocument. TODO: Remove ThemeUtils
|
| Thu, 22 Aug 2013 23:31:38 +0200 |
Sascha L. Teichmann |
Artifacts: Introduce ThemeDocument & make stuff compileable again. THIS BREAKS THE SYSTEM! TODO: Move ThemeUtils into ThemeDocument.
|
| Thu, 22 Aug 2013 15:38:57 +0200 |
Sascha L. Teichmann |
Artifacts: Make it compilable again.
|
| Thu, 22 Aug 2013 15:31:09 +0200 |
Sascha L. Teichmann |
ETL: Take care of the fact that one river in AFT/SGM may correspond to N rivers in FLYS.
|
| Thu, 22 Aug 2013 15:22:59 +0200 |
Andre Heinecke |
Added tag 3.0.14 for changeset 84b1e87e8669
|
| Thu, 22 Aug 2013 14:27:42 +0200 |
Felix Wolfsteller |
ComputedDischargeCurveGenerator: Use DischargeProcessor to add main values.
|
| Thu, 22 Aug 2013 14:26:04 +0200 |
Felix Wolfsteller |
ChartGenerator: Changed visibility of doAnnotations,
|
| Thu, 22 Aug 2013 14:24:44 +0200 |
Felix Wolfsteller |
DischargeCurveGenerator: Use DischargeProcessor.
|
| Thu, 22 Aug 2013 14:24:13 +0200 |
Felix Wolfsteller |
DischargeProcessor: Handle main-values. Temporarily disable w/q data handling.
|
| Thu, 22 Aug 2013 14:23:41 +0200 |
Felix Wolfsteller |
DischargeProcessor: Minor refactoring (use getter), warn when no Ẁ/Q data found.
|
| Wed, 21 Aug 2013 17:15:06 +0200 |
Tom Gottfried |
Give correct name to outlier method
3.0.14
|
| Wed, 21 Aug 2013 16:15:37 +0200 |
Sascha L. Teichmann |
Potential fix for flys/1453.
|
| Wed, 21 Aug 2013 16:14:29 +0200 |
Sascha L. Teichmann |
Backed out changeset 60f39ee19473
|
| Wed, 21 Aug 2013 16:13:36 +0200 |
Sascha L. Teichmann |
ETL: Potential fix for flys/1453.
|
| Wed, 21 Aug 2013 15:46:39 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
| Wed, 21 Aug 2013 15:41:58 +0200 |
Sascha L. Teichmann |
FixA: Remapped indices of analysis periods, too. Needs testing!
|
| Wed, 21 Aug 2013 15:32:53 +0200 |
Tom Gottfried |
BWASTR-Import: name of tributary contains name of river, not the other way round.
double-precision
|
| Wed, 21 Aug 2013 15:00:40 +0200 |
Felix Wolfsteller |
issue1378: Add axis markers for additional long-sect. without Q (e.g. dike heights).
|
| Wed, 21 Aug 2013 15:00:04 +0200 |
Felix Wolfsteller |
Cosmetics.
|
| Wed, 21 Aug 2013 12:24:45 +0200 |
Felix Wolfsteller |
issue1378: Also add ability to add text-annotations.
|
| Wed, 21 Aug 2013 12:40:42 +0200 |
Tom Gottfried |
Geo-Importer: import axes 2D to avoid problems with invalid z-coordinates
double-precision
|
| Wed, 21 Aug 2013 12:01:50 +0200 |
Sascha L. Teichmann |
FixA: Fix logger class reference.
|
| Wed, 21 Aug 2013 11:12:39 +0200 |
Felix Wolfsteller |
issue1378 (part): Make DC config for discharge curve offer correct
|
| Wed, 21 Aug 2013 11:11:56 +0200 |
Felix Wolfsteller |
issue1378: Prepare DischargeCurveGenerator to digest wq-interpolated data.
|
| Wed, 21 Aug 2013 11:11:22 +0200 |
Felix Wolfsteller |
Cosmetics.
|
| Wed, 21 Aug 2013 11:10:45 +0200 |
Felix Wolfsteller |
issue1378: Prepare StyledSeriesBuilder to get double[][] values to translate.
|
| Tue, 20 Aug 2013 15:05:07 +0200 |
Felix Wolfsteller |
issue1378: Preparing DischargeProcessor to be able to draw W/Q points,
|
| Tue, 20 Aug 2013 14:35:48 +0200 |
Felix Wolfsteller |
Cosmetics.
|
| Tue, 20 Aug 2013 13:03:03 +0200 |
Felix Wolfsteller |
Initial DischargeProcessor-commit (skeleton).
|
| Wed, 21 Aug 2013 01:09:25 +0200 |
Sascha L. Teichmann |
FixA: Make dates of analysis periods unique, too. TODO: Remap the indices like the reference interval.
|
| Tue, 20 Aug 2013 19:50:37 +0200 |
Sascha L. Teichmann |
FixA W/Q Diagram: Allow duplicate points. It should work but it doesn't. :-/
|
| Tue, 20 Aug 2013 19:24:26 +0200 |
Sascha L. Teichmann |
FixA: Fixed reference events mapping. TODO: Same for analysis periods.
|
| Tue, 20 Aug 2013 11:20:25 +0200 |
Sascha L. Teichmann |
FixA Delta W(t): Add 30 seconds to colliding dates to avoid them vanishing from the diagrams.
|
| Mon, 19 Aug 2013 22:19:09 +0200 |
Sascha L. Teichmann |
FixA: Reference points facets: the index of the point is stored in the lower 8 bits of the facect index. Why was it search via getIndex()?
|
| Mon, 19 Aug 2013 22:04:03 +0200 |
Sascha L. Teichmann |
FixA overview: Fetch dates in higher resolution from database.
|
| Mon, 19 Aug 2013 17:29:52 +0200 |
Tom Gottfried |
Undo misguided schema change from r5207
double-precision
|
| Mon, 19 Aug 2013 16:28:01 +0200 |
Andre Heinecke |
(issue1071) Increase river km column width
|
| Mon, 19 Aug 2013 16:37:04 +0200 |
Felix Wolfsteller |
issue738: Adjust S/Q-Relation Diagram subtitles.
|
| Mon, 19 Aug 2013 16:29:28 +0200 |
Sascha L. Teichmann |
Fix Analysis: Code simplification in facets.
|
| Mon, 19 Aug 2013 16:02:48 +0200 |
Sascha L. Teichmann |
Client: Removed an XPath eval and simplified a loop.
|
| Mon, 19 Aug 2013 12:48:03 +0200 |
Andre Heinecke |
Add small script to generate an issue overview from a roundup querry.
|
| Mon, 19 Aug 2013 12:45:27 +0200 |
Sascha L. Teichmann |
Factored our date formatter.
|
| Mon, 19 Aug 2013 12:44:11 +0200 |
Sascha L. Teichmann |
Break long lines.
|
| Mon, 19 Aug 2013 12:43:24 +0200 |
Felix Wolfsteller |
issue1225: Add bedheight/year-difference points with a scale factor,
|
| Mon, 19 Aug 2013 12:42:27 +0200 |
Felix Wolfsteller |
StyledSeriesBuilder: Added new method to add points with a scane factor.
|
| Mon, 19 Aug 2013 12:22:31 +0200 |
Felix Wolfsteller |
Minor refactoring.
|
| Mon, 19 Aug 2013 11:56:17 +0200 |
Felix Wolfsteller |
issue1395: Add missing w_differences compat to new chart ls.
|
| Mon, 19 Aug 2013 11:41:09 +0200 |
Andre Heinecke |
(issue1347) Add SQ Relation fields for measurement station information
|
| Mon, 19 Aug 2013 11:40:34 +0200 |
Andre Heinecke |
(issue1347) Update jasper templates with new fields
|
| Mon, 19 Aug 2013 11:34:47 +0200 |
Andre Heinecke |
(issue1347) Add measurement station getter for location
|
| Mon, 19 Aug 2013 10:35:27 +0200 |
Andre Heinecke |
Make debug functions of D4EArtifact public
|
| Mon, 19 Aug 2013 10:55:52 +0200 |
Felix Wolfsteller |
Merged backout of changes for 1440 (gap-detection in bedquality).
|
| Mon, 19 Aug 2013 10:55:13 +0200 |
Felix Wolfsteller |
Backed out changeset 10646f31efec
|
| Mon, 19 Aug 2013 10:20:51 +0200 |
Felix Wolfsteller |
Merged.
|
| Mon, 19 Aug 2013 10:19:06 +0200 |
Felix Wolfsteller |
issue1157: Only look at the best match for CrossSections to activate.
|
| Fri, 16 Aug 2013 11:30:07 +0200 |
Andre Heinecke |
(issue1391): Build the current discarge curve name as requested
|
| Fri, 16 Aug 2013 10:43:44 +0200 |
Andre Heinecke |
(issue1391)Add compatibility for hist.discharge in Hist discharge output
|
| Fri, 16 Aug 2013 09:39:27 +0200 |
Andre Heinecke |
(issue1391) Filter by reference_gauge or by KM
|
| Fri, 16 Aug 2013 09:38:15 +0200 |
Andre Heinecke |
Minor layout change
|
| Sat, 17 Aug 2013 20:08:51 +0200 |
Sascha L. Teichmann |
Fixing Analysis: Significantly (8-10x) improved the performance of the generation of the overview data. The data is now prefetched in batches.
|
| Sat, 17 Aug 2013 12:17:42 +0200 |
Sascha L. Teichmann |
Removed _stupid_ TODO question. WE WANT PULL OUT LOGIC OUT OF ARTIFACTS!
|
| Fri, 16 Aug 2013 09:16:30 +0200 |
Andre Heinecke |
Add FixingCalculatedPoint to second theme, too
|
| Thu, 15 Aug 2013 18:56:20 +0200 |
Sascha L. Teichmann |
Part of flys/issue1168: Make facet names unique. It should help but there must be bug before the facet generation.
|
| Thu, 15 Aug 2013 18:00:16 +0200 |
Andre Heinecke |
(issue1444) Add theme for fixing calculated point
|
| Thu, 15 Aug 2013 16:50:21 +0200 |
Andre Heinecke |
Readd accidentally removed line
|
| Thu, 15 Aug 2013 16:26:50 +0200 |
Andre Heinecke |
(Issue1357) Pull river name into getReferenceGauge
|
| Thu, 15 Aug 2013 16:25:50 +0200 |
Andre Heinecke |
Improve debug output in timerangestate
|
| Thu, 15 Aug 2013 16:05:17 +0200 |
Andre Heinecke |
(issue1353) Add river name handling
|
| Thu, 15 Aug 2013 15:57:54 +0200 |
Andre Heinecke |
(issue1353) Add method to model to gauge by number and river name
|
| Thu, 15 Aug 2013 15:57:13 +0200 |
Andre Heinecke |
(issue1353) Add river name to query for discharge Info
|
| Thu, 15 Aug 2013 15:50:42 +0200 |
Sascha L. Teichmann |
Part of flys/issue1168: Fix themes of fixings delta w averages. Bring default and second theme back in snyc.
|
| Thu, 15 Aug 2013 15:01:18 +0200 |
Sascha L. Teichmann |
Part of flys/issue1168: Show discharge sector averages as lines again.
|
| Thu, 15 Aug 2013 13:40:43 +0200 |
Christian Lins |
Add missing import in ArtifactMapfileGenerator
|
| Thu, 15 Aug 2013 13:35:18 +0200 |
Christian Lins |
(issue657) Prevent errornous recreation of usershape mapfile fragment.
|
| Thu, 15 Aug 2013 13:30:16 +0200 |
Christian Lins |
(issue657) Use regular expressions in Mapfile templates to catch various spellings of feature class types.
|
| Wed, 14 Aug 2013 16:50:35 +0200 |
Sascha L. Teichmann |
Backed out changeset 74a437805e2a
|
| Wed, 14 Aug 2013 16:24:12 +0200 |
Andre Heinecke |
(issue1347) Localize outliers and pdf Header
|
| Wed, 14 Aug 2013 15:26:50 +0200 |
Andre Heinecke |
(Issue1347) Update jasper files for pdf export of new data
|
| Wed, 14 Aug 2013 15:23:36 +0200 |
Andre Heinecke |
(issue1347) Add new variables to SQ Relation output.
|
| Wed, 14 Aug 2013 15:20:01 +0200 |
Andre Heinecke |
Fix typo in SQRelation calculation
|
| Wed, 14 Aug 2013 14:20:59 +0200 |
Christian Lins |
Mapfile templates contain regex expressions to catch features more robust (#657).
|
| Wed, 14 Aug 2013 12:54:00 +0200 |
Tom Gottfried |
import_rivers.sh: skip cross sections instead of WST-file in first run.
double-precision
|
| Wed, 14 Aug 2013 12:21:13 +0200 |
Tom Gottfried |
Importer Doc: force import of waterlevel WST-file in first run.
double-precision
|
| Wed, 14 Aug 2013 12:10:44 +0200 |
Tom Gottfried |
Importer: force import of waterlevel WST-file in first run.
double-precision
|
| Wed, 14 Aug 2013 11:28:30 +0200 |
Sascha L. Teichmann |
S/Q relation: Fixed broken parameter creator constructor.
|
| Wed, 14 Aug 2013 11:01:16 +0200 |
Sascha L. Teichmann |
S/Q relation: Added forgotten class.
|
| Tue, 13 Aug 2013 15:24:19 +0200 |
Tom Gottfried |
issue1328: improved i18n message
|
| Tue, 13 Aug 2013 09:51:15 +0200 |
Tom Gottfried |
WstParser: warn only once if no unit comment is found
double-precision
|
| Mon, 12 Aug 2013 18:14:12 +0200 |
Tom Gottfried |
Make postgresql-setup helper script work on different platforms.
double-precision
|
| Mon, 12 Aug 2013 18:12:14 +0200 |
Tom Gottfried |
fixed syntax errors in Postgres-schema.
double-precision
|
| Mon, 12 Aug 2013 08:27:21 +0200 |
Tom Gottfried |
Importer: set memory size according to doc
double-precision
|
| Mon, 12 Aug 2013 08:16:13 +0200 |
Tom Gottfried |
Geo-importer: remove leftovers of catchment and gauge location importers
double-precision
|
| Sat, 10 Aug 2013 12:25:58 +0200 |
Tom Gottfried |
Importer Doc: Update title page automatically.
double-precision
|
| Fri, 09 Aug 2013 21:40:30 +0200 |
Tom Gottfried |
Importer Doc: remove obsolete README. It is all in the tex-files now.
double-precision
|
| Fri, 09 Aug 2013 21:35:53 +0200 |
Tom Gottfried |
Importer doc: correctly document use of gew-file for geo-importer.
double-precision
|
| Fri, 09 Aug 2013 21:27:57 +0200 |
Tom Gottfried |
Geo-importer and doc: use commandline-argument instead of configuration for river selection.
double-precision
|
| Fri, 09 Aug 2013 20:47:10 +0200 |
Tom Gottfried |
Importer Doc: complete master data of gauges and waterlevel model and move to top.
double-precision
|
| Fri, 09 Aug 2013 20:30:14 +0200 |
Tom Gottfried |
WstParser and Importer doc: More sensible default unit and warn if it is used.
double-precision
|
| Fri, 09 Aug 2013 18:07:49 +0200 |
Tom Gottfried |
Importer Doc: move general information on geo-importer to overview.
double-precision
|
| Fri, 09 Aug 2013 18:06:40 +0200 |
Tom Gottfried |
Importer Doc: corrections to starting of geo-importer.
double-precision
|
| Fri, 09 Aug 2013 17:59:02 +0200 |
Tom Gottfried |
Importer Doc: corrections of geo-importer configuration.
double-precision
|
| Fri, 09 Aug 2013 17:57:12 +0200 |
Tom Gottfried |
Geo-importer: use commandline-argument instead of configuration for river selection.
double-precision
|
| Fri, 09 Aug 2013 17:27:16 +0200 |
Tom Gottfried |
Importer Doc: document DEM-Metadata import.
double-precision
|
| Fri, 09 Aug 2013 17:11:13 +0200 |
Tom Gottfried |
Importer Doc: reworked sectioning of geo-importer overview.
double-precision
|
| Fri, 09 Aug 2013 16:52:08 +0200 |
Tom Gottfried |
Importer Doc: completed description of shapefile-parsers.
double-precision
|
| Fri, 09 Aug 2013 15:55:50 +0200 |
Tom Gottfried |
Importer Doc: add description of alternativ attribut-names.
double-precision
|
| Fri, 09 Aug 2013 15:42:36 +0200 |
Tom Gottfried |
Importer Doc: reformat tables in parser descriptions of geo-importer.
double-precision
|
| Fri, 09 Aug 2013 13:36:05 +0200 |
Tom Gottfried |
Removed obsolete imports.
longitudinal-symmetry
|
| Fri, 09 Aug 2013 13:32:47 +0200 |
Tom Gottfried |
Move Funcionality related to bed quality from FlowVelocityGenerator to LongitudinalSectionGenerator (previously left over).
longitudinal-symmetry
|
| Fri, 09 Aug 2013 18:29:08 +0200 |
Sascha L. Teichmann |
S/Q relation: Spell Ferguson with F.
|
| Fri, 09 Aug 2013 18:24:55 +0200 |
Sascha L. Teichmann |
flys/issue1347: Added missing calcutions. TODO: Bring them into the generated outs.
|
| Fri, 09 Aug 2013 12:20:32 +0200 |
Felix Wolfsteller |
Cosmetics.
|
| Fri, 09 Aug 2013 12:11:53 +0200 |
Tom Gottfried |
Moved most of the functionality of FlowVelocityGenerator to LongitudinalSectionGenerator on the way to longitudinal-section symmetry. ToDos left.
longitudinal-symmetry
|
| Thu, 08 Aug 2013 17:36:44 +0200 |
Tom Gottfried |
merged changes from default into longitudinal-symmetry branch
longitudinal-symmetry
|
| Wed, 07 Aug 2013 18:57:29 +0200 |
Tom Gottfried |
merged changes from default into longitudinal-symmetrie branch
longitudinal-symmetry
|
| Wed, 07 Aug 2013 18:53:15 +0200 |
Tom Gottfried |
merge changes from default into longitudinal-symmetrie branch and make it build
longitudinal-symmetry
|
| Fri, 09 Aug 2013 08:34:10 +0200 |
Felix Wolfsteller |
issue1378: Handle static_wqkms.w as annotations.
|
| Fri, 09 Aug 2013 08:33:38 +0200 |
Felix Wolfsteller |
Cosmetics.
|
| Fri, 09 Aug 2013 08:32:37 +0200 |
Felix Wolfsteller |
issue1378: Add wqkms.w|q to discharge curve facet compat list.
|
| Thu, 08 Aug 2013 18:14:38 +0200 |
Sascha L. Teichmann |
S/Q: Excel compat completed: Now the data is linearized before fitting. This can be prevented by setting the system property S/Q: Excel compat completed: Now the data is linearized before fitting. This can be prevented by setting the system property "minfo.sq.calcution.non.linear.fitting" to true.
|
| Thu, 08 Aug 2013 16:19:59 +0200 |
Felix Wolfsteller |
Removed debug output.
|
| Thu, 08 Aug 2013 16:03:41 +0200 |
Felix Wolfsteller |
SedimentLoadFactory: Survive not completely defined sediment loads.
|
| Thu, 08 Aug 2013 15:46:18 +0200 |
Felix Wolfsteller |
issue1060: i18n.
|
| Thu, 08 Aug 2013 12:09:48 +0200 |
Felix Wolfsteller |
Added @Override-Annotation.
|
| Thu, 08 Aug 2013 12:09:26 +0200 |
Felix Wolfsteller |
added vimline
|
| Thu, 08 Aug 2013 12:08:18 +0200 |
Felix Wolfsteller |
Doc.
|
| Thu, 08 Aug 2013 12:17:03 +0200 |
Sascha L. Teichmann |
S/Q relation: Part I of 'faking' fitting linear data. S/Qs can now be subclassed and processed through views. TODO: Add knob to setup a linear data path.
|
| Thu, 08 Aug 2013 12:06:54 +0200 |
Felix Wolfsteller |
offer differences for bedheight-diffs in dc, and bedheight diffs in ls.
|
| Thu, 08 Aug 2013 10:38:36 +0200 |
Felix Wolfsteller |
issue1439: Show line segments for points that have gaps on both sides. Small refac.
|
| Wed, 07 Aug 2013 19:36:05 +0200 |
Sascha L. Teichmann |
S/Q relation: More Excel compat.
|
| Wed, 07 Aug 2013 18:24:07 +0200 |
Andre Heinecke |
Remove accidentally commited debug output
|
| Wed, 07 Aug 2013 16:04:05 +0200 |
Felix Wolfsteller |
issue1415: Corrected update query and parameter setting.
|
| Wed, 07 Aug 2013 14:29:25 +0200 |
Tom Gottfried |
Geo-importer: removed unused variable.
double-precision
|
| Wed, 07 Aug 2013 14:22:48 +0200 |
Tom Gottfried |
Geo-importer: removed obsolete run-script.
double-precision
|
| Wed, 07 Aug 2013 14:05:07 +0200 |
Felix Wolfsteller |
issue1440: Add gap detection at >101m for BedQuality LS diagrams.
|
| Wed, 07 Aug 2013 11:07:37 +0200 |
Felix Wolfsteller |
issue1439: reduce gap-tolerance to 101m.
|
| Wed, 07 Aug 2013 11:04:12 +0200 |
Felix Wolfsteller |
issue1439: Use auto-gap detect when adding points to series for bed diff data.
|
| Wed, 07 Aug 2013 11:02:43 +0200 |
Felix Wolfsteller |
StyledSeriesBuilder: Minor doc improvement.
|
| Wed, 07 Aug 2013 11:02:01 +0200 |
Felix Wolfsteller |
Cosmetics.
|
| Wed, 07 Aug 2013 11:00:55 +0200 |
Felix Wolfsteller |
QualityMeasurementFactory: Doc about singleton usage.
|
| Wed, 07 Aug 2013 10:59:53 +0200 |
Felix Wolfsteller |
Made trivial QualityMeasurement-constructor private, as it shouldnt be used.
|
| Wed, 07 Aug 2013 10:59:02 +0200 |
Felix Wolfsteller |
Doc.
|
| Wed, 07 Aug 2013 10:54:05 +0200 |
Felix Wolfsteller |
Cosmetics.
|
| Wed, 07 Aug 2013 10:48:53 +0200 |
Felix Wolfsteller |
cosmetics.
|
| Tue, 06 Aug 2013 18:46:40 +0200 |
Tom Gottfried |
Importer Doc: error in W80CSV-Parser.
double-precision
|
| Tue, 06 Aug 2013 17:00:49 +0200 |
Sascha L. Teichmann |
flys/issue748: Force linear curve fitting. This is a real hack! Set the system property "minfo.sq.fitting.nonlinear" to re-enable the old behavior.
|
| Tue, 06 Aug 2013 16:57:47 +0200 |
Felix Wolfsteller |
issue1416: missing english i18n.
|
| Tue, 06 Aug 2013 16:56:45 +0200 |
Felix Wolfsteller |
issue1416: exporter for sedimentload and i18n.
|
| Tue, 06 Aug 2013 16:39:41 +0200 |
Felix Wolfsteller |
issue1436: Remove wrong condition where previous value does not exist but is
|
| Tue, 06 Aug 2013 16:03:56 +0200 |
Felix Wolfsteller |
issue1435: Tolerate missing measurement values in QualityMeasurements.
|
| Tue, 06 Aug 2013 12:26:21 +0200 |
Felix Wolfsteller |
issue1433: Update caller for last commit.
|
| Tue, 06 Aug 2013 12:25:53 +0200 |
Felix Wolfsteller |
issue1433: Filter loaded unknown sediment yields by kind.
|
| Tue, 06 Aug 2013 11:04:12 +0200 |
Tom Gottfried |
merged changes from default into double-precision branch
double-precision
|
| Tue, 06 Aug 2013 11:06:25 +0200 |
Felix Wolfsteller |
issue1433: Include trailing empty strings in stringsplit, this prevents emission
|
| Tue, 06 Aug 2013 10:54:41 +0200 |
Felix Wolfsteller |
issue1433: Do not emit warning when tolerated empty string as value.
|
| Mon, 05 Aug 2013 18:39:12 +0200 |
Tom Gottfried |
Importer Doc: partly completed geo-importer parsers (with layout issues)
double-precision
|
| Mon, 05 Aug 2013 11:39:59 +0200 |
Tom Gottfried |
Importer Doc: completion and corrections to overview of geo-importer.
double-precision
|
| Mon, 05 Aug 2013 11:21:05 +0200 |
Tom Gottfried |
Importer Doc: Document reprojection of geo-data.
double-precision
|
| Mon, 05 Aug 2013 15:24:44 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
| Sat, 03 Aug 2013 13:06:29 +0200 |
Tom Gottfried |
Importer Dok: added missing warnings to hydr-morph section
double-precision
|
| Fri, 02 Aug 2013 11:51:08 +0200 |
Tom Gottfried |
Sediment Density parser: avoid NPE when no year is given
double-precision
|
| Fri, 02 Aug 2013 11:36:33 +0200 |
Tom Gottfried |
Sediment density parser: fetch year from metaline and parse
double-precision
|
| Thu, 01 Aug 2013 15:37:17 +0200 |
Felix Wolfsteller |
issue1337: fix. Let theme not inherit from longitudinal_section, as this
|
| Thu, 01 Aug 2013 15:16:32 +0200 |
Felix Wolfsteller |
meta-data.xml/DC: Automatically add annotations to middle bed height diagrams.
|
| Thu, 01 Aug 2013 13:07:37 +0200 |
Tom Gottfried |
Importer Doc: fix syntax error.
double-precision
|
| Thu, 01 Aug 2013 12:08:46 +0200 |
Felix Wolfsteller |
issue1393: Survive when off-epochs no total data, but other.
|
| Thu, 01 Aug 2013 11:58:25 +0200 |
Felix Wolfsteller |
Cosmetics, docs, in range of issue1393.
|
| Thu, 01 Aug 2013 10:15:00 +0200 |
Felix Wolfsteller |
issue1418: Fetch correct (not necessarily first) gauge
|
| Thu, 01 Aug 2013 10:02:36 +0200 |
Tom Gottfried |
Geo-Importer: Don not import misc. floodplains as hydraulic boundary.
double-precision
|
| Wed, 31 Jul 2013 15:41:57 +0200 |
Felix Wolfsteller |
issue1393: Avoid NPE for off-epoch when actually no off-epoch data available.
|
| Wed, 31 Jul 2013 15:27:51 +0200 |
Felix Wolfsteller |
issue1393: Fix theme association for sedimentload.total_load .
|
| Wed, 31 Jul 2013 14:29:12 +0200 |
Tom Gottfried |
Schema change: Store station of cross section lines with higher precision to avoid duplicates due to rounding.
double-precision
|
| Wed, 31 Jul 2013 13:10:34 +0200 |
Felix Wolfsteller |
Doc.
|
| Wed, 31 Jul 2013 12:31:09 +0200 |
Tom Gottfried |
merged changes from default into double-precision branch
double-precision
|
| Wed, 31 Jul 2013 12:40:04 +0200 |
Felix Wolfsteller |
Remove cryptic warning messages.
|
| Wed, 31 Jul 2013 12:31:35 +0200 |
Felix Wolfsteller |
issue1393: Fix display, no description, just years needed to select official epochs.
|
| Wed, 31 Jul 2013 11:31:23 +0200 |
Tom Gottfried |
merged changes from default into double-precision branch
double-precision
|
| Wed, 31 Jul 2013 11:36:21 +0200 |
Felix Wolfsteller |
Cosmetics.
|
| Wed, 31 Jul 2013 11:35:54 +0200 |
Felix Wolfsteller |
issue1393/SedLoadOffEpochPanel: Request the correct (off-epoch) data
|
| Wed, 31 Jul 2013 11:34:31 +0200 |
Felix Wolfsteller |
Doc.
|
| Wed, 31 Jul 2013 11:32:33 +0200 |
Felix Wolfsteller |
Cosmetics, docs.
|
| Wed, 31 Jul 2013 11:32:00 +0200 |
Felix Wolfsteller |
issu1393/SedimentLoadFactory: Handle off_epoch type queries.
|
| Wed, 31 Jul 2013 11:13:41 +0200 |
Felix Wolfsteller |
issue1393/ImportRiver: Import official epochs from directory, minor refac.
|
| Wed, 31 Jul 2013 11:12:53 +0200 |
Felix Wolfsteller |
issue1393/SedimentYieldParser: set kind of SedimentYields
|
| Wed, 31 Jul 2013 11:12:08 +0200 |
Felix Wolfsteller |
issue1393/backend: Add kind property to ImportSedimentYield and SedimentYield.
|
| Wed, 31 Jul 2013 11:10:11 +0200 |
Felix Wolfsteller |
minfo-schema-change/issue1393: add kind column to sediment_yield table.
|
| Wed, 31 Jul 2013 11:07:48 +0200 |
Felix Wolfsteller |
Doc.
|
| Tue, 30 Jul 2013 18:27:58 +0200 |
Felix Wolfsteller |
Cosmetics.
|
| Tue, 30 Jul 2013 19:15:41 +0200 |
Andre Heinecke |
Added tag 3.0.13 for changeset 71da3d4ffb4a
|
| Tue, 30 Jul 2013 19:14:49 +0200 |
Andre Heinecke |
issue1391: Some more unification fix km filtering for calculated discharges
3.0.13
|
| Tue, 30 Jul 2013 18:59:35 +0200 |
Andre Heinecke |
Add compatibility with more facet names for mainvalues.
|
| Tue, 30 Jul 2013 18:54:53 +0200 |
Tom Gottfried |
Importer Doc: completed and corrected section with warnings.
double-precision
|
| Tue, 30 Jul 2013 17:32:28 +0200 |
Andre Heinecke |
issue748: Change StandardDeviation implmentation to what BFG calls Standard Deviation
|
| Tue, 30 Jul 2013 16:24:59 +0200 |
Felix Wolfsteller |
Doc
|
| Tue, 30 Jul 2013 15:56:34 +0200 |
Felix Wolfsteller |
Cosmetics.
|
| Tue, 30 Jul 2013 07:35:57 +0200 |
Felix Wolfsteller |
Doc.
|
| Tue, 30 Jul 2013 16:09:40 +0200 |
Christian Lins |
Remove duplicate code for mapfile generation. ID problem still not fixed (#657).
|
| Tue, 30 Jul 2013 12:33:05 +0200 |
Andre Heinecke |
issue767: Do not encode the complete legend url
|
| Tue, 30 Jul 2013 11:19:54 +0200 |
Andre Heinecke |
Remove accidental commited debug output
|
| Tue, 30 Jul 2013 11:19:27 +0200 |
Andre Heinecke |
issue1391: Unify theme styles and add facet compatibilities
|
| Tue, 30 Jul 2013 09:54:59 +0200 |
Tom Gottfried |
Importer scripts: add skip flag for W80-CSV to import_river.sh
double-precision
|
| Mon, 29 Jul 2013 19:21:07 +0200 |
Andre Heinecke |
issue766: Minimal fix for doubled RiverAxis.
|
| Mon, 29 Jul 2013 17:27:48 +0200 |
Andre Heinecke |
Fix syntax error
|
| Mon, 29 Jul 2013 12:53:52 +0200 |
Andre Heinecke |
issue1391: Add forgotten i18n for historical discharges
|
| Mon, 29 Jul 2013 15:21:44 +0200 |
Tom Gottfried |
Importer Doc: Errors not documented so far
double-precision
|
| Mon, 29 Jul 2013 13:39:24 +0200 |
Tom Gottfried |
Importer doc: Document error when no measurement station fits station in SQ-file
double-precision
|
| Mon, 29 Jul 2013 12:32:29 +0200 |
Tom Gottfried |
Importer Dok: removed redundant doc and syntax error
double-precision
|
| Mon, 29 Jul 2013 12:26:13 +0200 |
Tom Gottfried |
Importer Doc: small corrections to configuration and typo
double-precision
|
| Mon, 29 Jul 2013 12:10:59 +0200 |
Tom Gottfried |
Importer Dok: document import_river.sh
double-precision
|
| Mon, 29 Jul 2013 11:56:21 +0200 |
Tom Gottfried |
Importer Doc: small corrections to morphological data
double-precision
|
| Mon, 29 Jul 2013 11:49:30 +0200 |
Tom Gottfried |
Importer Dok: documented measurement stations
double-precision
|
| Mon, 29 Jul 2013 15:02:22 +0200 |
Felix Wolfsteller |
issue1418: skip MainValues with NaN values.
|
| Mon, 29 Jul 2013 12:29:40 +0200 |
Andre Heinecke |
issue1391: Add new facets for gaugedischarge
|
| Mon, 29 Jul 2013 12:19:57 +0200 |
Andre Heinecke |
issue1391: Enable GaugeDischarge artifact to directly load a table by its ID
|
| Mon, 29 Jul 2013 12:17:11 +0200 |
Andre Heinecke |
issue1891: Add method to get a discharge table by it's id
|
| Mon, 29 Jul 2013 12:16:12 +0200 |
Andre Heinecke |
issue1391: Unify datacage elements in discharge curve outs and add historical discharges
|
| Mon, 29 Jul 2013 12:14:51 +0200 |
Andre Heinecke |
issue1391: Fix syntax in gauge macros and add km filtering
|
| Mon, 29 Jul 2013 11:56:03 +0200 |
Felix Wolfsteller |
issue1393: Handle bedheightdiff-facets in LS Generator.
|
| Mon, 29 Jul 2013 11:55:35 +0200 |
Felix Wolfsteller |
issue1393: Add bedheight-difference facets to chart.xml longitudinal-section
|
| Mon, 29 Jul 2013 10:14:32 +0200 |
Andre Heinecke |
Do not translate river annotations twice. (issue1370)
|
| Fri, 26 Jul 2013 16:28:34 +0200 |
Andre Heinecke |
Activate also in historical discharge
|
| Mon, 29 Jul 2013 09:30:44 +0200 |
Felix Wolfsteller |
issue1416: SedimentLoadExporter: Implemented rough output.
|
| Mon, 29 Jul 2013 09:28:32 +0200 |
Felix Wolfsteller |
Prepare i18n for issue1416.
|
| Mon, 29 Jul 2013 09:26:32 +0200 |
Felix Wolfsteller |
Use full stop in doc. This fixes my syntax highlight :) .
|
| Mon, 29 Jul 2013 09:25:04 +0200 |
Felix Wolfsteller |
Doc.
|
