log

age author description
2011-12-16 Sascha L. Teichmann Load DIPS XML
2011-12-16 Sascha L. Teichmann Load gauges from both dbs.
2011-12-14 Sascha L. Teichmann Sync each river.
2011-12-13 Sascha L. Teichmann Improved infrastructure for prepared statements.
2011-12-13 Sascha L. Teichmann start syncing at river level.
2011-12-13 Sascha L. Teichmann load configuration an setup db connections.
2011-12-13 Sascha L. Teichmann Added configuration file
2011-12-13 Sascha L. Teichmann Added XML/XPath support.
2011-12-12 Sascha L. Teichmann Added support for symbolic SQL statements.
2011-12-12 Sascha L. Teichmann Add infrastructure to load SQL statements for databases.
2011-12-11 Sascha L. Teichmann Added AFT sync module.
2012-10-09 Sascha L. Teichmann S/Q relation: Fixed problem with loosing meassurement points.
2012-10-09 Ingo Weinzierl Added build script for FLYS release.
2012-10-09 Christian Lins Show river map only once.
2012-10-08 Christian Lins Merged
2012-10-08 Christian Lins Handle error conditions more robust.
2012-10-08 Felix Wolfsteller Handle new percent_input ui provider name.
2012-10-08 Felix Wolfsteller Documentation, vimline.
2012-10-08 Felix Wolfsteller Documentation.
2012-10-08 Felix Wolfsteller Added Percentage-Input state to extreme value analysis state model.
2012-10-08 Felix Wolfsteller Move ChangeLog entry to right ChangeLog.
2012-10-08 Felix Wolfsteller Fix paths in ChangeLog.
2012-10-08 Felix Wolfsteller Dummy state model for extreme value analysis.
2012-10-08 Felix Wolfsteller fix issue909: strange validation code. be fearles.
2012-10-08 Felix Wolfsteller Documentation.
2012-10-08 Felix Wolfsteller Do cumentation.
2012-10-06 Sascha L. Teichmann More dead code removal. Minor code clean ups.
2012-10-06 Sascha L. Teichmann Cleaned up iterating over maps. Removed some dead code.
2012-10-06 Sascha L. Teichmann Removed dead code
2012-10-06 Sascha L. Teichmann Removed dead code.
2012-10-06 Sascha L. Teichmann Removed dead code
2012-10-06 Sascha L. Teichmann LegendProcessor: avoid redundant hashing. removed dead code.
2012-10-05 Christian Lins Fix for ArrayIndexOutOfBoundsException (#818).
2012-10-05 Christian Lins Add chart legend entries for interpolated series (#838).
2012-10-05 Felix Wolfsteller Cosmetics, documentation.
2012-10-05 Felix Wolfsteller Fix typo in DC query.
2012-10-05 Felix Wolfsteller Register new calculation mode 'extreme'.
2012-10-05 Felix Wolfsteller Documentation.
2012-10-04 Sascha L. Teichmann Removed dead code.
2012-10-04 Felix Wolfsteller Cosmetics, refac.
2012-10-04 Felix Wolfsteller Doc.
2012-10-04 Felix Wolfsteller Use static method from class not object.
2012-10-04 Björn Ricks Allow to set a uiprovider for a static state
2012-10-04 Björn Ricks Set translated data descriptions
2012-10-04 Björn Ricks Add messages for displaying the river name and gauge reference.
2012-10-04 Björn Ricks Add description and set correct name for GaugeDischargeCurveFacet
2012-10-04 Felix Wolfsteller issue889/2
2012-10-04 Björn Ricks Add template for the gauge discharge curve description
2012-10-04 Björn Ricks Fix dates in changelog and a typo
2012-10-04 Björn Ricks Improve debug output
2012-10-04 Björn Ricks Fix xpath for attributes
2012-10-04 Björn Ricks Fix typo and change out type to chart
2012-10-04 Björn Ricks Add warning if no compatible facet is found
2012-10-04 Björn Ricks Avoid NPE if no attribute outs are present
2012-10-04 Felix Wolfsteller Merged.
2012-10-04 Felix Wolfsteller issue417: main-value-annotations.
2012-10-04 Christian Lins Add message for 'state.chart.km'
2012-10-04 Felix Wolfsteller Merged.
2012-10-02 Felix Wolfsteller i18n for annotations.
2012-10-02 Sascha L. Teichmann Added tag flys-2.9.2 for changeset e1691b74f3aa
2012-10-02 Felix Wolfsteller Let AnnotationFacet have name of type, if type was chosen. flys-2.9.2
2012-10-02 Felix Wolfsteller Merged.
2012-10-02 Felix Wolfsteller Handle annotationtypes in AnnotationArtifact and -Facet.
2012-10-02 Felix Wolfsteller Show 'per-type' annotations in longitudinal-section DC.
2012-10-02 Christian Lins Set overflow behaviour of Toolbars to HIDDEN to avoid auto scrollbars.
2012-10-02 Felix Wolfsteller Reverted merge-victims in ChangeLog.
2012-10-02 Felix Wolfsteller Merged
2012-10-01 Felix Wolfsteller Added TODOs for issue880.
2012-10-01 Sascha L. Teichmann S(Q) relation. Fixed SQL statements.
2012-10-01 Sascha L. Teichmann S(Q) relation: Totals are now fetched with separate SQL statement. Fixed join to GEWAESSER table.
2012-10-01 Sascha L. Teichmann S(Q) Fixed AIOOBE
2012-10-01 Sascha L. Teichmann S(Q) relation: Removed unused field from SQL statement.
2012-10-01 Sascha L. Teichmann Calculate S(Q) fractions
2012-10-01 Sascha L. Teichmann S(Q) calculate effective width
2012-10-01 Björn Ricks Add missing import of FLYSConstants
2012-10-01 Sascha L. Teichmann Fix compiling bug
2012-10-01 Sascha L. Teichmann S(Q) accumulated same diameter meassurements per bank distance.
2012-10-01 Björn Ricks Add a ChangeLog entry for commit cfbc80cc0ce4
2012-10-01 Björn Ricks Update changelog for my last flys-artifact commits
2012-10-01 Björn Ricks Add correct debug output for GaugeDischargeCurveArtifact
2012-10-01 Björn Ricks Add Facet type for GaugeDischargeCurveArtifact
2012-10-01 Björn Ricks Add a default constructor for StaticState
2012-10-01 Björn Ricks Add config for the GaugeDischargeCurveArtifact
2012-10-01 Felix Wolfsteller fix issue898 (crash when no param selected for parametermatrix).
2012-10-01 Felix Wolfsteller Doc.
2012-09-30 Sascha L. Teichmann Simpify the S(Q) fraction sieving stuff.
2012-09-30 Sascha L. Teichmann Removed dead code.
2012-09-30 Sascha L. Teichmann Added initial .hgignore
2012-09-30 Christian Lins More robust exception handler (#897)
2012-09-30 Christian Lins Fixing Delta W/t chart: reference period area can now switched to invisible (#877)
2012-09-30 Christian Lins Correct i18n fixation outlier widget (state.fixation.preprocess).
2012-09-30 Sascha L. Teichmann Removed heavy weight data from the gauge discharge curve facet.
2012-09-30 Sascha L. Teichmann Removed superflous imports.
2012-09-29 Christian Lins Manual points working in fixing Delta W/t char (#462).
2012-09-29 Christian Lins ManualPointsEditor supports Date x axis values.
2012-09-28 Felix Wolfsteller improvements on issue860: display parameter matrix as grid list in helperpane.
2012-09-28 Sascha L. Teichmann More code for S(Q) relation.
2012-09-28 Björn Ricks Fix typo
2012-09-28 Thomas Arendsen Hein added tags
2012-09-28 Thomas Arendsen Hein dummy merge for repo head
2012-09-28 Thomas Arendsen Hein dummy merge for repo head
2012-09-28 Thomas Arendsen Hein dummy merge for repo head
2012-09-28 Thomas Arendsen Hein dummy merge for repo head
2012-09-28 Thomas Arendsen Hein dummy merge for repo head
2012-09-28 Thomas Arendsen Hein dummy merge for repo head
2012-09-28 Thomas Arendsen Hein dummy merge for repo head
2012-09-28 Thomas Arendsen Hein dummy merge for repo head
2012-09-28 Thomas Arendsen Hein dummy merge for repo head
2012-09-28 Thomas Arendsen Hein dummy merge for repo head
2012-09-28 Thomas Arendsen Hein dummy merge for repo head
2012-09-28 Thomas Arendsen Hein dummy merge for repo head
2012-09-28 Thomas Arendsen Hein dummy merge for repo head
2012-09-28 Thomas Arendsen Hein dummy merge for repo head
2012-09-28 Thomas Arendsen Hein dummy merge for repo head
2012-09-28 Thomas Arendsen Hein dummy merge for repo head
2012-09-28 Thomas Arendsen Hein merged flys-backend
2012-09-28 Ingo Weinzierl Adapted the spatial schema for DEMs and the DgmSqlConverter.
2012-09-27 Felix Wolfsteller fix issue862/1.
2012-09-27 Ingo Weinzierl Added a new method to RiverAxis to query a special kind of river axes (default, official, outsourced).
2012-09-27 Felix Wolfsteller fix issue863: Handle missing data points for epoch bed height data.
2012-09-27 Felix Wolfsteller Documentation (d o c u m e n t a t i o n).
2012-09-27 Felix Wolfsteller Removed debug output.
2012-09-27 Felix Wolfsteller Let importer handle gappy single bed height values.
2012-09-27 Felix Wolfsteller Cosmetics, docs.
2012-09-27 Felix Wolfsteller Towards fix for issue863 (gaps in bedheight data).
2012-09-27 Sascha L. Teichmann Backend: Code simplification. Removed trailing whietspace.
2012-09-27 Ingo Weinzierl Modified the schema for DGMs; added converter for CSV to SQL for DGM information.
2012-09-24 Ingo Weinzierl Adapted postgresql spatial schema and fixed a bug in the geo importer.
2012-09-24 Ingo Weinzierl Some minor bugfixes for MINFO import.
2012-09-24 Ingo Weinzierl Adapted PostgreSQL spatial schema.
2012-09-24 Bjoern Ricks Remove fetchInfoURL methods from River and gauge
2012-09-22 Sascha L. Teichmann Backend: Added 'official_number' column to rivers table to model the 'Bundeswasserstrassen Identnummer'.
2012-09-21 Bjoern Ricks Change methods names until the url is really be fetched from the db
2012-09-21 Bjoern Ricks Add a new method to River and Gauge classes to return a http url for additional
2012-09-19 Ingo Weinzierl Store minfo values into database only if their peer has been successfully stored.
2012-09-18 Sascha L. Teichmann Removed trailing whitespace.
2012-09-18 Ingo Weinzierl Added missing GrainFraction type to parser; accept 'Querprofil' as valid BedHeightType during MINFO import.
2012-09-18 Ingo Weinzierl Improved logging and stabilized minfo import.
2012-09-17 Ingo Weinzierl Tagged 'flys-backend' as 2.9.1
2012-09-28 Thomas Arendsen Hein merged flys-artifacts
2012-09-28 Bjoern Ricks Also add the name to the artifact description
2012-09-28 Bjoern Ricks Add new Artifacts and State for displaying discharge curves at a gauge
2012-09-28 Bjoern Ricks Make addOutput of StaticState public
2012-09-28 Bjoern Ricks Add FLYSArtifact addFacets method
2012-09-28 Ingo Weinzierl Added an 'info' node to DEMs in the datacage.
2012-09-28 Felix Wolfsteller i18n.
2012-09-27 Felix Wolfsteller Cosmetics, docs.
2012-09-27 Felix Wolfsteller Work in i18n issue724.
2012-09-27 Sascha L. Teichmann S(Q) relation: Fixed SQL projection.
2012-09-27 Sascha L. Teichmann S(Q) relation. Extract more values from database.
2012-09-27 Felix Wolfsteller Partly fix issue871.
2012-09-27 Felix Wolfsteller Fix issue863.
2012-09-27 Ingo Weinzierl Set the missing 'originalExtent' attribute for WSPLGEN layers.
2012-09-27 Felix Wolfsteller Towards fix of issue863 (gaps in middle heigh bed data).
2012-09-27 Sascha L. Teichmann Removed trailing whitespace.
2012-09-27 Sascha L. Teichmann S/Q: More symbols in reconstruction of Excel macros.
2012-09-26 Bjoern Ricks Mark createOutputModes as private
2012-09-26 Bjoern Ricks Convert FKYSArtifact data member to a private variable
2012-09-26 Christian Lins Enable line labels for Delta W/t sector average lines
2012-09-26 Ingo Weinzierl Fixed various projection issues during map creation.
2012-09-26 Christian Lins Rename fix_derivate to fix_derivate_curve to enable manual points on it
2012-09-25 Felix Wolfsteller Re-enable manual point facets for some fix* charts.
2012-09-24 Christian Lins Fix for #825 ?
2012-09-24 Raimund Renkert MINFO: Fixed SQL statement in BedloadOverview. Exclude data where km is null.
2012-09-24 Christian Lins Fixing analysis longitudinal section chart has now initially deactivated A1/B facets
2012-09-24 Bjoern Ricks Remove info-url and add official number
2012-09-23 Christian Lins W(Q) chart: q sectors are now black and labeled by default
2012-09-23 Sascha L. Teichmann Cosmetics.
2012-09-23 Sascha L. Teichmann Removed trailing whitespace.
2012-09-23 Christian Lins Theming and i18n of Delta W/t A1/B facets
2012-09-22 Christian Lins Add reference period facet to delta W/t chart
2012-09-22 Christian Lins Fix for area clipping problem in longitudinal section char
2012-09-22 Felix Wolfsteller Cosmetics, docs.
2012-09-22 Felix Wolfsteller Prevent ArrayIndexOutOfBounds-Exception.
2012-09-22 Felix Wolfsteller Document issue880
2012-09-22 Sascha L. Teichmann Removed trailing whitespace.
2012-09-21 Raimund Renkert Added i18n strings for bedheight difference charts.
2012-09-21 Raimund Renkert Added themes for bedheight difference charts.
2012-09-21 Raimund Renkert Add river annotations to bedheight difference charts.
2012-09-21 Raimund Renkert Bedheight difference calculation has chart outpus now.
2012-09-21 Raimund Renkert MINFO: Updated data fields to fit the needs of bedheight difference calculation.
2012-09-21 Bjoern Ricks Return also the official gauge number in a service response
2012-09-21 Bjoern Ricks Use fetchInfoURL instead of getInfoURL until the URL is fetched from the db
2012-09-21 Felix Wolfsteller fix issue887 (hyk in new chart).
2012-09-21 Bjoern Ricks Return also the river and gauge info-url in a service response
2012-09-21 Felix Wolfsteller Fix issue886 (no extrapolation of waterlines).
2012-09-21 Felix Wolfsteller Better Partial fix for issue880 (dc).
2012-09-21 Felix Wolfsteller Partial issue880 (dc).
2012-09-20 Christian Lins Area transparency fix
2012-09-20 Felix Wolfsteller improve manual points in fix. charts.
2012-09-20 Raimund Renkert New calcultion in MINFO: Bed height difference calculation.
2012-09-20 Raimund Renkert Split bed heights into bed height epochs and single bed heights.
2012-09-20 Raimund Renkert Add dates to csv header in bed quality export.
2012-09-20 Raimund Renkert Added i18n string for bed quality CSV export.
2012-09-20 Christian Lins Manual points (work in progress)
2012-09-19 Sascha L. Teichmann Removed trailing whitespace.
2012-09-19 Bjoern Ricks Fix date in changelog entry
2012-09-19 Raimund Renkert Added CSV export to bed quality calculation.
2012-09-19 Bjoern Ricks Add the gauge station to the GaugeOverviewInfoService xml response
2012-09-18 Christian Lins A and B facets of fix analyis are now deactivated by default
2012-09-18 Sascha L. Teichmann Some more little steps towards "Auslagerung extremer Wasserspiegellagen".
2012-09-18 Sascha L. Teichmann Use generics aware Collections.emptyList().
2012-09-18 Sascha L. Teichmann The usual whitespace and import cleanups.
2012-09-18 Raimund Renkert Fixed some stupid bugs in bed quality data factory and calculation.
2012-09-18 Raimund Renkert Removed incorrect characteristic diameter.
2012-09-18 Christian Lins Update themes to show point descriptions
2012-09-18 Felix Wolfsteller i18n for area label (fix issue487).
2012-09-18 Christian Lins Add robustness checks to prevent NPEs
2012-09-18 Felix Wolfsteller fix issue865 - missing showarea theme prop.
2012-09-17 Raimund Renkert Fixed date range in minfo bed quality result.
2012-09-17 Raimund Renkert Refactor MINFO bed quality resultsets and facets.
2012-09-17 Ingo Weinzierl Tagged 'flys-artifacts' as 2.9.1
2012-09-28 Bjoern Ricks Allow to create a discharge curve from a gauge info
2012-09-28 Bjoern Ricks Add the river name to the gaugeinfo
2012-09-27 Felix Wolfsteller Added accidentally omitted ChangeLog entry.
2012-09-27 Felix Wolfsteller work on issue724 (i18n).
2012-09-27 Felix Wolfsteller Cosmetics, docs.
2012-09-27 Felix Wolfsteller Donate own error message when no users were found.
2012-09-27 Christian Lins Work on "Date" support for ManualPointsEditor.
2012-09-27 Sascha L. Teichmann Removed trailing whitespace
2012-09-27 Bjoern Ricks Add servelet mapping for the GaugeOverviewInfoService
2012-09-26 Ingo Weinzierl #897: Readded missing empty constructor.
2012-09-25 Christian Lins Fix for #854
2012-09-25 Felix Wolfsteller Improved fix for issue860 (parameter in helper pane).
2012-09-25 Felix Wolfsteller Attempt at issue860.
2012-09-24 Christian Lins KMSpinner height is now normal again
2012-09-24 Bjoern Ricks Use the Context PATH servlet variable when using URLs in the GGInAFilter
2012-09-24 Felix Wolfsteller issue871 (tiny bit messy parameterization for flowvelocity).
2012-09-24 Felix Wolfsteller Cosmetics, docs.
2012-09-24 Bjoern Ricks Fix setting kmup in the GaugeInfo class
2012-09-24 Bjoern Ricks Calculate the info url via i18n
2012-09-22 Christian Lins Show full function instead of internal function name (#873).
2012-09-21 Raimund Renkert Added i18n strings for bedheight difference calculation.
2012-09-21 Bjoern Ricks Open gauge tree fold for historicalq reference too
2012-09-21 Bjoern Ricks Add the official gauge number to the GaugeInfo class
2012-09-21 Bjoern Ricks Move GaugeTree to its own java file
2012-09-21 Bjoern Ricks Refactor GaugeTree folding for different states
2012-09-21 Bjoern Ricks Refactor to avoid code duplication
2012-09-21 Bjoern Ricks Add html links for the additinal river and gauge info pages
2012-09-21 Bjoern Ricks Extend RiverInfo and GaugeInfo to store also the info http url
2012-09-21 Bjoern Ricks Open and close gauge tree folds that correspond to the selected WINFO
2012-09-21 Bjoern Ricks Fix NullPointerException
2012-09-20 Christian Lins i18n (#872)
2012-09-20 Sascha L. Teichmann Prevent AIOOB exception.
2012-09-20 Sascha L. Teichmann Removed superfluous import.
2012-09-19 Christian Lins i18n
2012-09-19 Bjoern Ricks Use the wstunit from the river as unit for the Pegelnullpunkt
2012-09-19 Bjoern Ricks Don't display the GaugePanel if no river is selected
2012-09-19 Bjoern Ricks Fix a NullPointerException
2012-09-19 Bjoern Ricks Improve the GaugePanel
2012-09-19 Bjoern Ricks Improve the handling of the GaugePanel in the ParameterList
2012-09-19 Bjoern Ricks Add station info to the gauges
2012-09-19 Bjoern Ricks Implement a scrolling gauge info tree
2012-09-19 Bjoern Ricks Add missing Changelog entry for r5472
2012-09-18 Sascha L. Teichmann Removed trailing whitespace.
2012-09-17 Ingo Weinzierl Tagged 'flys-client' as 2.9.1
2012-09-17 Ingo Weinzierl Added missing i18n strings for minfo state description.
2012-09-28 Thomas Arendsen Hein merged flys-backend/pre2.7-2012-03-16 pre2.7-2012-03-16
2012-03-16 Ingo Weinzierl Tagged module 'flys-backend' as 'pre2.7-2012-03-16'.
2012-09-28 Thomas Arendsen Hein merged flys-artifacts/pre2.7-2012-03-16
2012-03-19 Felix Wolfsteller Prevent follow-up errors.
2012-03-19 Felix Wolfsteller Disable legend entry aggregation.
2012-09-28 Thomas Arendsen Hein merged flys-backend/pre2.6-2012-01-04 pre2.6-2012-01-04
2012-09-28 Thomas Arendsen Hein merged flys-artifacts/pre2.6-2012-01-04
2012-09-28 Thomas Arendsen Hein merged flys-backend/pre2.6-2011-12-05 pre2.6-2011-12-05
2012-09-28 Thomas Arendsen Hein merged flys-artifacts/pre2.6-2011-12-05
2011-12-07 Ingo Weinzierl Picked rev3357, rev3359 and rev3360 from trunk.
2011-12-05 Ingo Weinzierl Picked rev3354 from trunk.
2011-12-05 Ingo Weinzierl Picked rev3347-rev3351 from trunk.
2011-12-07 Ingo Weinzierl Picked rev3356 and rev3358 from trunk.
2012-09-28 Thomas Arendsen Hein merged flys-backend/pre2.6-2011-11-04 pre2.6-2011-11-04
2012-09-28 Thomas Arendsen Hein merged flys-artifacts/pre2.6-2011-11-04
2011-11-08 Ingo Weinzierl Picked rev3182 from trunk.
2011-11-08 Ingo Weinzierl Picked rev3180 from trunk.
2011-11-08 Ingo Weinzierl Picked rev3178 from trunk.
2011-11-08 Ingo Weinzierl Picked rev3186 from trunk.
2011-11-04 Ingo Weinzierl Tagged flys-client as 'pre2.6-2011-11-04'
2012-09-28 Thomas Arendsen Hein merged flys-backend/2.9.1 2.9.1
2012-09-17 Ingo Weinzierl Fixed broken loops to find the bed height epochs and singles for a given river and km range.
2012-09-13 Sascha L. Teichmann Made importer more robust
2012-09-13 Sascha L. Teichmann Importer: Added flag to invert skipping behaviour by default. Makes importing single features much easier.
2012-09-12 Sascha L. Teichmann FLYS backend: Fixed postgresql scheme.
2012-09-12 Bjoern Ricks Fix hibernate query
2012-09-12 Bjoern Ricks Add new method determineMinMaxQ to the River class to fetch the mimimum and maximum q values
2012-09-11 Sascha L. Teichmann FYLS-Backend: Bring MINFO schemes of Oracle and PostgreSQL back in sync.
2012-09-10 Sascha L. Teichmann Backend: Java 1.5 -> 1.6
2012-09-10 Christian Lins Remove obsolet method
2012-09-10 Sascha L. Teichmann Backend: 'Pegelinfo' needs min/max Q, too.
2012-09-10 Bjoern Ricks Add method fetchMinMaxWQ to Gauge
2012-09-08 Sascha L. Teichmann Moved some code over from flys-artifacts.
2012-09-07 Ingo Weinzierl Tagged 'flys-backend' as 2.9
2012-09-28 Thomas Arendsen Hein merged flys-artifacts/2.9.1
2012-09-19 Ingo Weinzierl Merged revisions 5501-5502,5504-5508,5511-5513,5516-5519 via svnmerge from
2012-09-19 Ingo Weinzierl Merged revisions 5498-5499 via svnmerge from
2012-09-17 Ingo Weinzierl Added more missing translations for state in minfo.
2012-09-17 Ingo Weinzierl Added missing translation of minfo state.
2012-09-17 Ingo Weinzierl Defined colors for bed quality themes.
2012-09-17 Raimund Renkert Avoid NPE if the user selects onlyone sort of characteristic diameter.
2012-09-16 Sascha L. Teichmann Commit ChangeLog change
2012-09-16 Sascha L. Teichmann Fixed wrong assigned loggers.
2012-09-16 Sascha L. Teichmann Added base class RiverAccess to dense code to access the river name.
2012-09-16 Sascha L. Teichmann Implemented the access for 'Auslagerung extremer Wasserspiegellagen'
2012-09-16 Sascha L. Teichmann More infrastructure stuff for the "Auslagerung extremer Wasserspiegellagen".
2012-09-16 Sascha L. Teichmann flys-artifacts: Removed some superfluous implementations of FacetTypes.
2012-09-15 Sascha L. Teichmann Removed now dead code from the early days of the cross sections.
2012-09-15 Sascha L. Teichmann The usual wipe after for ill configured Eclipses.
2012-09-15 Christian Lins Locales fix
2012-09-15 Christian Lins Manual Points for fixing charts (not working yet)
2012-09-14 Raimund Renkert Implemented bed quality calculation in minfo module.
2012-09-14 Raimund Renkert Added getter for characteristic diameter in bed quality access.
2012-09-14 Ingo Weinzierl Created i18n descriptions for facets in bed quality calculation.
2012-09-14 Ingo Weinzierl Use data of bed quality facets to fill the chart.
2012-09-14 Ingo Weinzierl Added JFreeUtil.randomizeLine() to generate randomized lines.
2012-09-14 Ingo Weinzierl Added themes for bed quality facets.
2012-09-14 Raimund Renkert Updated minfo bed quality result objects.
2012-09-14 Ingo Weinzierl Splitted up facets for porosity and density into two facets: a toplayer and a sublayer facet for each. BedQualityState will now create facets based on the calculation result.
2012-09-13 Christian Lins Fix missing import
2012-09-13 Raimund Renkert Added result objects for minfo bed quality calculation.
2012-09-13 Ingo Weinzierl Renamed input parameters of MINFO flow velocity calculation.
2012-09-13 Raimund Renkert Added depth parameter to bed quality data.
2012-09-13 Ingo Weinzierl Added facets and chart generator for bed quality calculation.
2012-09-13 Raimund Renkert The factory for minfo bed quality calculation can load bedload and bed data from seddb now.
2012-09-13 Raimund Renkert Data objects and factory for minfo bedquality calculation.
2012-09-13 Felix Wolfsteller Added figures for DC conf doc.
2012-09-13 Bjoern Ricks Add also min and max q values to the river info.
2012-09-12 Sascha L. Teichmann Removed trailing whitespace.
2012-09-12 Raimund Renkert Added new services to render overview charts in minfo bed quality calculation
2012-09-12 Sascha L. Teichmann Removed trailing whitespace.
2012-09-12 Ingo Weinzierl Created the initial structure for MINFO bed quality chart generation.
2012-09-11 Sascha L. Teichmann Pegelinfo: Made generation of datum and aeo NPE proof.
2012-09-11 Bjoern Ricks Use getGaugeValue method also for aeo and datum
2012-09-11 Christian Lins Fix for #837
2012-09-10 Christian Lins Check to prevent NPE
2012-09-10 Sascha L. Teichmann Slightly refactored range with values code to be useful in extreme waterlevels.
2012-09-10 Sascha L. Teichmann Extreme waterlevels: calculate the segments for Q km ranges.
2012-09-10 Sascha L. Teichmann Added type safety.
2012-09-10 Sascha L. Teichmann Java 1.5 -> 1.6
2012-09-10 Christian Lins Remove unnecessary theme attributes (#836)
2012-09-10 Bjoern Ricks Add new artifact service for the gauge overview
2012-09-09 Christian Lins Theme transparency attribute support (#840)
2012-09-09 Sascha L. Teichmann Simplified code for extreme curves.
2012-09-09 Sascha L. Teichmann WST tables: Added interpolation of tabulated values only.
2012-09-09 Christian Lins Updating area themes
2012-09-09 Christian Lins Modify every second theme to differ from default theme (#835)
2012-09-08 Sascha L. Teichmann Some first models needed for the extreme waterlevels.
2012-09-08 Sascha L. Teichmann More iterator code simplification.
2012-09-08 Sascha L. Teichmann Simplified code.
2012-09-08 Sascha L. Teichmann FixA: Improved robustness and performance in facet generation for dates.
2012-09-08 Sascha L. Teichmann Factored out a pure QW model to be more reusable.
2012-09-08 Sascha L. Teichmann Removed obsolete code. Removed NPE as regular flow control.
2012-09-08 Sascha L. Teichmann Removed code duplication.
2012-09-08 Sascha L. Teichmann Removed trailing whitespace. Back from future.
2012-09-08 Sascha L. Teichmann Removed superfluous imports.
2012-09-07 Felix Wolfsteller Added acidentally omitted ChangeLog entry for last commit.
2012-09-07 Felix Wolfsteller Cosmetics, docs.
2012-09-07 Raimund Renkert Set data for characteristic diameter for use in parameter matrix UI.
2012-09-07 Raimund Renkert Issue 791.
2012-09-07 Ingo Weinzierl Tagged 'flys-artifacts' as 2.9
2012-09-19 Ingo Weinzierl Merged revisions 5495-5496,5509,5514-5515,5521-5526 via svnmerge from
2012-09-17 Ingo Weinzierl Tagged 'flys-client' as 2.9.1
2012-09-16 Christian Lins KMSpinner refactoring
2012-09-15 Sascha L. Teichmann Removed trailing whitespace and superfluous imports.
2012-09-14 Bjoern Ricks Add first draft for the gauge overview info ui
2012-09-14 Bjoern Ricks Missing file from last commit
2012-09-14 Bjoern Ricks Implement a gauge service
2012-09-14 Christian Lins Add "to" and "from" strings to table columns.
2012-09-13 Ingo Weinzierl Translated german strings in english language files.
2012-09-13 Ingo Weinzierl Improved i18n in minfo code.
2012-09-13 Christian Lins Scrolling the project list is now more robust.
2012-09-13 Ingo Weinzierl Added i18n strings for bed quality chart and export.
2012-09-13 Christian Lins Add constant string for error_no_modules_found.
2012-09-13 Christian Lins Cosmetics
2012-09-12 Raimund Renkert Added UI for minfo bed quality calculation and added new services for overview
2012-09-12 Raimund Renkert Fixed constructor.
2012-09-11 Christian Lins Fix for line label text in Delta W(t) chart (#837).
2012-09-10 Christian Lins Transparency combobox appearence fix for #840.
2012-09-10 Sascha L. Teichmann Java 1.5 -> Java 1.6
2012-09-09 Christian Lins Transparency attribute theme fixes
2012-09-09 Christian Lins Add 'error_updating_collection_attribute' (#843).
2012-09-09 Christian Lins Catch MissingResourceException on unexpected server exceptions.
2012-09-08 Sascha L. Teichmann Removed trailing whitespace. Reverted functional change in parsing plain user file.
2012-09-08 Christian Lins Cosmetics
2012-09-07 Sascha L. Teichmann Be more defensive about fetchimg users from session.
2012-09-07 Felix Wolfsteller Improved panning in TimeseriesCharts (issue715).
2012-09-07 Felix Wolfsteller Cosmetics, docs.
2012-09-07 Bjoern Ricks Refactor UserServiceImpl getCurrentUser method
2012-09-07 Bjoern Ricks Move RemoteServiceServlet to server package
2012-09-07 Ingo Weinzierl Tagged 'flys-client' as 2.9
2012-09-28 Thomas Arendsen Hein merged flys-backend/2.9 2.9
2012-09-07 Bjoern Ricks Rename method to satisfy hibernate
2012-09-06 Bjoern Ricks Used wrong class in ChangeLog message
2012-09-06 Bjoern Ricks Add getDurationCurveData method to Gauge class
2012-08-30 Felix Wolfsteller Removed conflict markers from ChangeLog.
2012-08-30 Felix Wolfsteller issue821 (cross sections beyond 500m).
2012-08-30 Ingo Weinzierl Added run scripts for both importers.
2012-08-30 Ingo Weinzierl Fixed typo.
2012-08-30 Ingo Weinzierl Corrected name of run scripts for importers in docu.
2012-08-30 Ingo Weinzierl Added error description of geo importer; fixed bugs.
2012-08-30 Ingo Weinzierl Fixed broken method call in geo importer.
2012-08-30 Ingo Weinzierl Added hint for root permission in documentation.
2012-08-30 Ingo Weinzierl Added 'path' attribute to each geo relation; adapted the shape importer to set the path for each feature.
2012-08-30 Ingo Weinzierl Finalized geo part of importer documentation; set document revision and date.
2012-08-30 Ingo Weinzierl Added manual line breaks.
2012-08-30 Ingo Weinzierl Fixed bugs during PDF creation.
2012-08-30 Ingo Weinzierl Fixed bugs in hydrological and morphological documentation.
2012-08-30 Ingo Weinzierl Describe unpack process and schema creation.
2012-08-30 Ingo Weinzierl Describe connection error in geo importer.
2012-08-29 Ingo Weinzierl Documented install steps for Oracle Instantclient, Python and GDAL.
2012-08-27 Ingo Weinzierl Describe Log4J configuration in importer documentation.
2012-08-27 Ingo Weinzierl Mention the structure of a river directory and describe the morphological file import in the german documentation.
2012-08-27 Ingo Weinzierl Fixes and structural changes in the german documentation.
2012-08-27 Ingo Weinzierl Transfered README into latex documentation (german).
2012-08-26 Sascha L. Teichmann backend: Importer: Documented which hydrological files are taken into account.
2012-08-26 Sascha L. Teichmann backend: Importer: Documented the classification of the annotations.
2012-08-26 Sascha L. Teichmann backend: Importer: Documented the db credentials.
2012-08-24 Sascha L. Teichmann backend: Completed the error messages of the importer.
2012-08-24 Ingo Weinzierl Initial checkin of documentation of importer and shape importer.
2012-08-23 Sascha L. Teichmann backend: Mention backend warnings in importer.
2012-08-23 Sascha L. Teichmann backend: Mention backend errors in importer.
2012-08-23 Ingo Weinzierl Initial checkin of documentation of the shape importer.
2012-08-23 Sascha L. Teichmann backend: Added first part of the importer documentation.
2012-08-23 Ingo Weinzierl Shape importer: modified structure of run.sh script.
2012-08-22 Ingo Weinzierl Shape importer: added command line option dry_run to supress database transactions.
2012-08-22 Ingo Weinzierl Shape importer: use python's OptionParse to read user specific configuration from command line.
2012-08-09 Sascha L. Teichmann Added FastAnnotation.Annotation.toString()
2012-07-27 Ingo Weinzierl Tagged module flys-backend as '2.8.1'.
2012-09-28 Thomas Arendsen Hein merged flys-artifacts/2.9
2012-09-07 Ingo Weinzierl Merged revisions 5391-5392 via svnmerge from
2012-09-07 Ingo Weinzierl Merged revisions 5375,5379,5382 via svnmerge from
2012-09-07 Sascha L. Teichmann Removed superfluous imports.
2012-09-07 Sascha L. Teichmann Removed deprecated method.
2012-09-06 Bjoern Ricks Mark getDurationCurveData method as deprecated
2012-09-06 Felix Wolfsteller Revert acidentally committed experiment.
2012-09-06 Felix Wolfsteller smaller part of issue825 fixed (column ordering of dwt-export).
2012-09-05 Sascha L. Teichmann FixA: AT export: prevent some numerical problems with steep functions around zero.
2012-09-05 Sascha L. Teichmann FixA: Increase Q max about 5% if storing as AT file.
2012-09-04 Sascha L. Teichmann Fixed issue687: Rewrote AT export in FixA
2012-09-04 Felix Wolfsteller issue820: changed label for middle height/depth.
2012-09-03 Felix Wolfsteller Default horizontal and vertical logo placement to top/center instead of 'none'.
2012-09-03 Felix Wolfsteller Better comment for logo-adders.
2012-09-03 Raimund Renkert Fixed logo integration in timeseries charts.
2012-09-02 Felix Wolfsteller Adjusted ChangeLog, issue number for last commit was 744.
2012-09-02 Felix Wolfsteller Fix issue774 (wrong items).
2012-09-01 Felix Wolfsteller Fix issue829, wst col indices start with 0.
2012-09-01 Sascha L. Teichmann Removed trailing whitespace.
2012-08-31 Felix Wolfsteller Fix invalid cast.
2012-08-31 Raimund Renkert Added i18n strings for minfo bed quality parameters.
2012-08-31 Bjoern Ricks Add a module service. It's now possible to configure the modules which are
2012-08-31 Raimund Renkert MINFO: Added states and config for bed quality calculation.
2012-08-31 Raimund Renkert Refactored location/distance state to use FLYSArtifact instead of WINFOArtifact.
2012-08-31 Felix Wolfsteller fix issue817, removed double entries from dc conf.
2012-08-30 Felix Wolfsteller issue729, show default line labels for line sin cross sections.
2012-08-30 Felix Wolfsteller issue814 line labels always visible.
2012-08-30 Felix Wolfsteller issue695, fix path to showlevel style property.
2012-08-29 Felix Wolfsteller Include logos in resources.
2012-08-29 Felix Wolfsteller Enable logo rendering in timeseries charts.
2012-08-29 Felix Wolfsteller Deal with inverted axes in longitudinal charts and logos.
2012-08-29 Felix Wolfsteller Improved logo placement.
2012-08-29 Felix Wolfsteller Add logo settings to cross section chartsettings.
2012-08-29 Felix Wolfsteller Split logo placement property in two (vertical/horizontal).
2012-08-28 Felix Wolfsteller sloppy logo placement property implementation.
2012-08-28 Felix Wolfsteller Add rather faked image annotations to chart, if property is set accordingly.
2012-08-28 Felix Wolfsteller Preparations for logo inclusion in charts.
2012-08-28 Raimund Renkert MINFO: Implemented UI and facet/artifact stack for bed height differences.
2012-08-27 Felix Wolfsteller Fixed typo.
2012-08-23 Sascha L. Teichmann Removed superfluous import.
2012-08-23 Raimund Renkert FixA: Changed sector average form point to line in delta W(t) chart.
2012-08-23 Raimund Renkert Issue 716.
2012-08-22 Sascha L. Teichmann FixA: Using trove to map int->int instead of bloated generics.
2012-08-22 Sascha L. Teichmann FLYSArtifactCollection: Prevent another NPE. Removed dead code.
2012-08-22 Sascha L. Teichmann FixA: Generate indices for each analysis periods.
2012-08-22 Christian Lins Fix for NPE
2012-08-22 Sascha L. Teichmann FixA: Made indices of analysis periods QWs zero based.
2012-08-22 Sascha L. Teichmann FixA: Store unique coulun index into QW models.
2012-08-22 Sascha L. Teichmann FixA: Use the column cache to establish a consistent index scheme.
2012-08-22 Christian Lins Issue #806 and NullPointerExceptions in CrossSectionGenerator fixed
2012-08-20 Sascha L. Teichmann Removed superfluous import. s/Double.valueOf/Double.parseDouble/
2012-08-17 Raimund Renkert Removed debug outputs in exporter.
2012-08-17 Raimund Renkert FixA: Added exporter for AT files.
2012-08-16 Felix Wolfsteller More facets in ausgelagerte WSP/ W/Q diag.
2012-08-16 Sascha L. Teichmann Shortend overlong line. Simplified code.
2012-08-16 Felix Wolfsteller Handle former W calculations in fixA W/Q out.
2012-08-16 Felix Wolfsteller Add ls facet type to compat. list of w/q outs.
2012-08-16 Raimund Renkert FixA: Added getter for ui provider in function select state.
2012-08-16 Sascha L. Teichmann Simplified code
2012-08-15 Felix Wolfsteller Do not hard-recommend gauge-discharges for fix wq.
2012-08-15 Felix Wolfsteller Fail more gracefully.
2012-08-15 Felix Wolfsteller More former calculations in fixa dwt dc.
2012-08-15 Felix Wolfsteller More former calculations in FixA DC.
2012-08-14 Felix Wolfsteller Add more discharge curve data to DC and W/Q diag.
2012-08-14 Felix Wolfsteller Add more facets to DC and W/Q diag.
2012-08-14 Felix Wolfsteller Added accidentally omitted ChangeLog entry.
2012-08-14 Felix Wolfsteller Basedata in FixA WQ DC and diagram.
2012-08-13 Felix Wolfsteller Added deltawt-out.
2012-08-13 Felix Wolfsteller Show former calculation in FixA WQ DC.
2012-08-13 Felix Wolfsteller Show former calculations in Fix/DeltaWT DC, fixes.
2012-08-13 Felix Wolfsteller Show more former calculation in FixA LS DC.
2012-08-13 Felix Wolfsteller Fix factory name.
2012-08-13 Felix Wolfsteller Add annotations to fixA longitudinal Sections.
2012-08-13 Felix Wolfsteller Theme the qsector markers.
2012-08-10 Felix Wolfsteller Rudimentary Themeing for qsector lines.
2012-08-10 Felix Wolfsteller i18n and renderering of qsectors in w/q diag.
2012-08-10 Felix Wolfsteller Added State for QSector artifact.
2012-08-10 Felix Wolfsteller Add more qsectory infrastructure.
2012-08-10 Felix Wolfsteller Added stub of QSector-Artifact-infrastructure.
2012-08-09 Sascha L. Teichmann Removed superfluous imports.
2012-08-09 Felix Wolfsteller Cosmetics.
2012-08-08 Felix Wolfsteller Set info attribute in datacage, to have tooltips in gui.
2012-08-07 Felix Wolfsteller Changed wording for reference curves reference station(s).
2012-08-07 Felix Wolfsteller Corrected ChangeLog of last commit, fixed issue798, not 795.
2012-08-07 Felix Wolfsteller Fix issue795.
2012-08-01 Sascha L. Teichmann S/Q relation: Fixed flys/issue748
2012-07-31 Sascha L. Teichmann FixA: Only evict only one(!) data point as outlier before recalculating the function.
2012-07-31 Sascha L. Teichmann FixA: Corrected the formulas of Grubbs' test for outliers. Still a bit broken.
2012-07-30 Sascha L. Teichmann S/Q relation: Setup better initial activity for the facets of the S/Q results.
2012-07-30 Sascha L. Teichmann Use getCurrentKmFromRequest().doubleValue() in i18n formatting.
2012-07-29 Sascha L. Teichmann Partly reverted Double->double change of clins.
2012-07-29 Sascha L. Teichmann S/Q relation: Initially activate/deactivate facets.
2012-07-29 Sascha L. Teichmann S/Q relation: Initially activate/deactivate facets.
2012-07-29 Sascha L. Teichmann Adjusted to follow the Chain-of-responsibility pattern in figuring out facet activities.
2012-07-29 Sascha L. Teichmann Made expensive XMLUtils.toString() debug output conditional.
2012-07-29 Sascha L. Teichmann Use the new infrastructure to figure out if a facet should
2012-07-28 Sascha L. Teichmann s/container.size() == 0/container.isEmpty()/
2012-07-28 Sascha L. Teichmann FLYSArtifact: Lowered logging output level from info to debug. Made some more debug outputs conditional.
2012-07-28 Sascha L. Teichmann FLYSArtifact: Some code simplifications.
2012-07-27 Sascha L. Teichmann S/Q: Extented the result data model of the S/Q calculation to
2012-07-27 Ingo Weinzierl Avoid class cast exception in FixWQCurveGenerator.
2012-07-27 Ingo Weinzierl Tagged flys-artifacts as '2.8.1'.
2012-09-07 Ingo Weinzierl Merged revisions 5384 via svnmerge from
2012-09-07 Ingo Weinzierl Merged revisions 5373,5377-5378 via svnmerge from
2012-09-04 Sascha L. Teichmann Removed trailing whitespace
2012-09-04 Felix Wolfsteller fix issue63
2012-09-04 Bjoern Ricks Add debug output to log which local file will be used for authentication data
2012-09-04 Bjoern Ricks Add allowed features for flys_wsa_schweinfurt role
2012-09-04 Raimund Renkert Issue 808.
2012-09-04 Raimund Renkert Issue 664.
2012-09-04 Christian Lins Revert pom.xml web.xml changes
2012-09-04 Christian Lins Add missing imports and fix package declaration of RemoteServiceServlet
2012-09-04 Raimund Renkert Issue 791: Do not allow the same values in reference and target location.
2012-09-04 Felix Wolfsteller issue820: Changed i18 for middle height -> middle depth.
2012-09-03 Felix Wolfsteller Do not show labels in logo selection combo box.
2012-09-03 Felix Wolfsteller Show logos in select box.
2012-09-01 Sascha L. Teichmann Removed superfluous imports.
2012-09-01 Christian Lins Overflow for toolbars is now HIDDEN.
2012-09-01 Christian Lins Change button title in DatacagePairWidget (#746).
2012-08-31 Christian Lins ThemePanel are now resizable (fix for #750)
2012-08-31 Felix Wolfsteller Maybe squashed issue531.
2012-08-31 Bjoern Ricks Set the default value of the RadioGroupItem if a loaded module is selected
2012-08-31 Bjoern Ricks Load the list of modules from the flys artifact server
2012-08-31 Bjoern Ricks Add isSelected method to Module classes
2012-08-31 Raimund Renkert MINFO: Added new UI provider for bed quality calculation.
2012-08-31 Raimund Renkert Use river data in all states not only winfo in location/distance ui provider.
2012-08-31 Raimund Renkert Hide the W/Q AT export button in fix analysis parameter tab.
2012-08-31 Bjoern Ricks Use xml namespace for XPath query to get the accout name attribute.
2012-08-31 Bjoern Ricks Add servlet settings for ModuleService
2012-08-30 Christian Lins New projects are now maximized by default.
2012-08-30 Christian Lins Fixed size for GetFeatureInfoWindow.
2012-08-29 Felix Wolfsteller i18n for logo placement.
2012-08-29 Bjoern Ricks Fix typo: add missing ,
2012-08-29 Bjoern Ricks User ModuleService to get all modules for a user
2012-08-29 Bjoern Ricks Hardcode German module translations temporarily
2012-08-29 Bjoern Ricks Set roles and features for GGinA
2012-08-29 Bjoern Ricks Add service to list available modules for a user
2012-08-29 Bjoern Ricks Added class representation of a module artifact
2012-08-29 Felix Wolfsteller Updated to use split properties for logo placement.
2012-08-28 Felix Wolfsteller i18n and interpretation for logo placement chart property.
2012-08-28 Felix Wolfsteller Show logo selection box for logo chart property.
2012-08-28 Felix Wolfsteller First i18n strings for logo-stuff in charts.
2012-08-28 Felix Wolfsteller Cosmetics.
2012-08-28 Raimund Renkert MINFO: Added UI for minfo differences calculation.
2012-08-24 Bjoern Ricks User new find-user REST service in UserClient
2012-08-24 Bjoern Ricks Send account data to artifact rest interface to create a user
2012-08-24 Bjoern Ricks Don't use XPath Query to get attribute of a XML Node
2012-08-24 Bjoern Ricks Add account information to flys-client user classes
2012-08-24 Bjoern Ricks Add debug output if a database user will be created
2012-08-23 Bjoern Ricks Avoid using XPath queries for getting attributes of a node
2012-08-22 Christian Lins Delete empty project after closing CollectionView (#785).
2012-08-20 Sascha L. Teichmann Removed superfluous import. Removed some inner whitespace. Made debug output conditional.
2012-08-17 Raimund Renkert FixA: Added AT file export to FixAnalysis W/Q.
2012-08-16 Sascha L. Teichmann ProxyServlet: Use block instead of byte wise copy.
2012-08-16 Bjoern Ricks Implement a ProxyServlet
2012-08-16 Sascha L. Teichmann Replaced another attribute fetching XPath with a simple DOM getAttributeNS() call.
2012-08-15 Bjoern Ricks Add ChangeLog entry for last commit
2012-08-15 Bjoern Ricks Avoid NullPointerException if user authetication is deactivated. If user
2012-08-15 Raimund Renkert Issue 752.
2012-08-15 Bjoern Ricks Don't display not allowed rivers to the user
2012-08-15 Bjoern Ricks Add new RemoteServiceServlet class
2012-08-13 Sascha L. Teichmann Removed superfluous imports.
2012-08-10 Bjoern Ricks Add debug log of a successfull authentification
2012-08-10 Bjoern Ricks Add example features for GGinA/WAS role flys_bfg
2012-08-10 Bjoern Ricks Don't use xml namespace to get the "name" attribute of a role
2012-08-10 Bjoern Ricks Implement Features handling for WAS authentication
2012-08-10 Bjoern Ricks Refactor Authentication to allow to pass the Freatures to the user class
2012-08-09 Sascha L. Teichmann XMLFileFeatures: Cosmetics.
2012-08-09 Sascha L. Teichmann Removed trailing whitespace.
2012-08-08 Bjoern Ricks Add missing import of ArrayList
2012-08-08 Bjoern Ricks Some optimization of the code mentioned by Sascha T.
2012-08-08 Bjoern Ricks Fix indentation of my last changelog entries
2012-08-08 Bjoern Ricks Remove the BaseServlet class which is obsolete now
2012-08-08 Bjoern Ricks Rename FeatureServletContextListener and move it out of the features package
2012-08-08 Bjoern Ricks Add servlet context parameters and load FeaturesServletContextListener
2012-08-08 Bjoern Ricks Implement a class representation of features corresponding to roles
2012-08-08 Felix Wolfsteller Show tooltips for datacage rows.
2012-08-08 Felix Wolfsteller Doc added, uses static map in converter.
2012-07-30 Sascha L. Teichmann Removed superfluous imports.
2012-07-27 Ingo Weinzierl Tagged flys-client as '2.8.1'.
2012-09-28 Thomas Arendsen Hein merged flys-backend/2.8.1 2.8.1
2012-07-18 Felix Wolfsteller Adjusted official lines views schemata to include wst column pos.
2012-07-16 Ingo Weinzierl Tagged flys-backend module as '2.8'.
2012-09-28 Thomas Arendsen Hein merged flys-artifacts/2.8.1
2012-07-26 Felix Wolfsteller Towards issue745 (lines for averages in deltawt).
2012-07-26 Ingo Weinzierl Registered new output 'fix_vollmer_wq_curve' for the vollmer path of fixings analysis module; create required Facets for it after calculation.
2012-07-26 Felix Wolfsteller Adjusted i18n strings
2012-07-26 Christian Lins Point labels can have a background color now.
2012-07-26 Felix Wolfsteller i18n
2012-07-26 Ingo Weinzierl Added new Output WaterlevelExport (CSV, WST and PDF) to FixRealizingCompute State.
2012-07-25 Sascha L. Teichmann FixA: Removed instanceof hack to fetch the WQKms of the fix realizations.
2012-07-25 Ingo Weinzierl Create proper facets for Ws and Qs in FixRealizingCompute state.
2012-07-25 Felix Wolfsteller Also add Q-facets for fixrealization.
2012-07-25 Felix Wolfsteller Commit accidentally kept change.
2012-07-25 Felix Wolfsteller Add waterlevel facet and longitudinal_section out for fixationrealization.
2012-07-25 Felix Wolfsteller Fix data names in access for fixrealizing.
2012-07-25 Felix Wolfsteller Let WaterlevelFacet handle FixationArtifact.
2012-07-25 Felix Wolfsteller fix vol/l/mer.
2012-07-24 Sascha L. Teichmann Replace string comparison with empty string with length equals zero comparison
2012-07-24 Sascha L. Teichmann Removed some superfluous casts.
2012-07-23 Sascha L. Teichmann FixA: Removed some inner whitespace.
2012-07-23 Sascha L. Teichmann FixA/Vollmer: return the result now.
2012-07-23 Sascha L. Teichmann FixA: Vollmer. Calculated the Q -> Ws. TODO: Produce result.
2012-07-23 Felix Wolfsteller Adjusted i18n.
2012-07-23 Felix Wolfsteller Set ld_mode.
2012-07-23 Felix Wolfsteller Adjusted i18n.
2012-07-23 Felix Wolfsteller Handle FixationArtifacts in WQAdapted-State.
2012-07-23 Felix Wolfsteller Preparing W/Q per gauge input for FixationArtifact.
2012-07-23 Felix Wolfsteller Commit accidentally ommitted cosmetic in winfo.xml.
2012-07-23 Felix Wolfsteller Cosmetics, docs.
2012-07-23 Sascha L. Teichmann FixA: Moved Q -> W conversion code into segments to be reusable.
2012-07-23 Christian Lins Remove line style attributes from FixingReferenceEvents
2012-07-23 Sascha L. Teichmann FixA 'ausgelagerte Wasserspiegellagen' move comparator code into segment class.
2012-07-23 Christian Lins Simplify annotation code
2012-07-23 Sascha L. Teichmann FixA: Made calculation base class abstract. Sub classes are called with fixings overview an function to fit.
2012-07-23 Sascha L. Teichmann FLYSArtifact: Prevent NPE in getOutputForState(). Why does this happen?
2012-07-22 Sascha L. Teichmann FixA: Made curve fitting over the given calculation range reusable. Removed dead code.
2012-07-22 Sascha L. Teichmann FixA: Moved more common calculation code into base class.
2012-07-21 Sascha L. Teichmann FixA: Overview: Clip the displayed from/to ranges of the gauges to the max extent of the events.
2012-07-21 Sascha L. Teichmann FixA: Embed german and english translations into the overview stylesheet.
2012-07-21 Sascha L. Teichmann FixA: Introduced i18n to overview transformation.
2012-07-20 Sascha L. Teichmann FixA: fixed aggregation bug in calculation of range spreads.
2012-07-20 Sascha L. Teichmann FixA: XSL overview transform renders the names of the gauges into the head line.
2012-07-20 Ingo Weinzierl Use a new state - specific for SQ relation - for the period input in the SQ relation.
2012-07-20 Sascha L. Teichmann FixA: Bring XSLT in sync with flys-client to ease development.
2012-07-20 Ingo Weinzierl Limited the input of time periods in SQ relation calculation to 1.
2012-07-20 Ingo Weinzierl Disabled legends in SQ relation overview generator.
2012-07-20 Sascha L. Teichmann Removed superfluous imports.
2012-07-20 Sascha L. Teichmann i18n: Fixed anomalies in properties files
2012-07-20 Ingo Weinzierl OutGenerators got a setCollection() method; analogous to setMasterArtifact(). Registered the SQOverviewGenerator as OutGenerator for 'sq_overview' Output.
2012-07-19 Sascha L. Teichmann FixA: Added a list of gauges to the output of the fixings overview service which intersect the selected fixings.
2012-07-19 Sascha L. Teichmann FixA: Minor refactoring
2012-07-19 Sascha L. Teichmann FixA: Created a common base class for the fixing related calculations.
2012-07-19 Sascha L. Teichmann FixA: Moved common parameter access to common base class.
2012-07-19 Sascha L. Teichmann FixA: Prevent NPE when exporting parameters.
2012-07-19 Sascha L. Teichmann Small optimization.
2012-07-19 Sascha L. Teichmann FixA: Renamed FixResult to FixAnalysisResult.
2012-07-19 Sascha L. Teichmann FixA: Added stub for the "Ausgelagerte Wasserspiegellagen" calculation.
2012-07-19 Sascha L. Teichmann FixA: Renamed FixationVolmerCompute to FixRealizingCompute.
2012-07-19 Sascha L. Teichmann FixA: Renamed FixationCompute to FixAnalysisCompute
2012-07-19 Sascha L. Teichmann FixA: Renamed FixCalculation to FixAnalysisCalculation.
2012-07-19 Christian Lins Add analysis periods as subtitle to W/Q chart
2012-07-19 Christian Lins Add subtitle to Fix W/Q chart and refactor addSubtitle() method(s)
2012-07-19 Sascha L. Teichmann FixA: Renamed FixationArtifactAccess to FixAnalysisAccess
2012-07-19 Ingo Weinzierl Set default value of MINFO SQ relation's outliers parameter to 3.
2012-07-19 Christian Lins Add kilometer to chart titles
2012-07-19 Sascha L. Teichmann Use Integer.parseInt() instead of Integer.valueOf() + Autounboxing.
2012-07-19 Sascha L. Teichmann Simplified code.
2012-07-18 Sascha L. Teichmann FixA: KM chart service: Use only blue as point color.
2012-07-18 Sascha L. Teichmann Adjusted Delta W(t) CSV exporter to customers wishes.
2012-07-18 Sascha L. Teichmann FixA: Overview: classify Q ranges by intersecting gauges.
2012-07-18 Felix Wolfsteller smaller bandwidth fixes.
2012-07-18 Felix Wolfsteller Change bandwidth theme attribute type to double (but bugged).
2012-07-18 Sascha L. Teichmann FixA: Added time range column to Delta W(t) CSV export.
2012-07-18 Sascha L. Teichmann FixA: Added discharge column to DeltaW(t) CSV export.
2012-07-18 Sascha L. Teichmann Removed trailing whitespace.
2012-07-17 Felix Wolfsteller Cosmetics, doc.
2012-07-17 Felix Wolfsteller Partial implementation of bandwidths for curves (issue720).
2012-07-17 Sascha L. Teichmann S/Q relation: Out commented the LEFT JOINs which produce a lot of empty and
2012-07-16 Sascha L. Teichmann S/Q relation: Write parameters as export result.
2012-07-16 Felix Wolfsteller Doc, TODO added.
2012-07-16 Sascha L. Teichmann SQ relation: Out commented debug output which caused OOM errors.
2012-07-16 Sascha L. Teichmann Q is not taken from MESSUNG.Q but from MESSUNG.Q_BPEGEL
2012-07-16 Ingo Weinzierl Taged flys-artifacts module as '2.8'.
2012-07-26 Christian Lins pom.xml fixed
2012-07-26 Ingo Weinzierl Added new titles for 'fix_vollmer_wq_curve' Output; let it use NaviChartOutputTab.
2012-07-26 Christian Lins Original values for config.xml and web.xml
2012-07-26 Christian Lins Merge point/line label styles
2012-07-25 Felix Wolfsteller commit omitted change.
2012-07-25 Felix Wolfsteller Accept slighty different names of state data of fixationartifacts when getting kmrange.
2012-07-24 Felix Wolfsteller Cosmetics, docs.
2012-07-24 Felix Wolfsteller Respect factory of cloned artifact when cloning.
2012-07-24 Sascha L. Teichmann Removed some superfluous casts.
2012-07-21 Sascha L. Teichmann FixA: Overview: Catch the case that a previous gauge is before the start of the events.
2012-07-21 Sascha L. Teichmann FixA: Bring overview transformation in sync with flys-artifacts.
2012-07-21 Sascha L. Teichmann FixA: Introduce i18n to overview transformation.
2012-07-20 Sascha L. Teichmann FixA: Overview contains names of the the gauges in the headline.
2012-07-20 Ingo Weinzierl Removed SVG and PDF export buttons from chart toolbar of overview charts.
2012-07-20 Ingo Weinzierl Added a new UIProvider that allows the input of a time period; the helper panel displays the field campaigns of MINFO's SQ relation.
2012-07-20 Ingo Weinzierl Added a new UI provider that allows the input of a single time period (without any helper panel).
2012-07-20 Sascha L. Teichmann Removed superfluous imports and trailinh whitespace.
2012-07-20 Ingo Weinzierl New implementation of OverviewOutputTab which has a minimalistic chart toolbar and no chart theme panel. The overview image is fetched as single image from server.
2012-07-19 Ingo Weinzierl Read default value of Data item and set textfield of DoubleInputPanel if a default value is existing.
2012-07-19 Sascha L. Teichmann Use more idiomatic Java when parsing doubles and ints.
2012-07-19 Sascha L. Teichmann ChangeLog: Removed remains from former conflict.
2012-07-19 Sascha L. Teichmann Removed trailing whitespace. Import cleanup
2012-07-19 Felix Wolfsteller Register upcoming FixQSelectPanel UI-Provider, added omitted ChangeLog entries.
2012-07-19 Felix Wolfsteller Set previously selected values for bandwidth theme-prop.
2012-07-19 Felix Wolfsteller Cosmetics.
2012-07-19 Raimund Renkert FixA: Input fields for chart navigation now use the correct i18n number formats.
2012-07-18 Sascha L. Teichmann FixA: Overview: Generate only legend entries for existing discharge sectors.
2012-07-18 Sascha L. Teichmann FixA: Replaced discharge sectors with more human readable labels.
2012-07-18 Sascha L. Teichmann FixA: Overview: Added legend at bottom of overview table.
2012-07-18 Raimund Renkert Show the overview and chart in function select state in fix analysis helper
2012-07-18 Felix Wolfsteller Populate already set theme attributes.
2012-07-18 Felix Wolfsteller Cosmetics.
2012-07-18 Felix Wolfsteller Improve validation of double-type style arguments.
2012-07-18 Felix Wolfsteller Cosmetic compression.
2012-07-18 Ingo Weinzierl Lock the screen when the parameterization of a Collection's master Artifact changes.
2012-07-18 Felix Wolfsteller Handle upcoming 'double' theme attribute type.
2012-07-18 Felix Wolfsteller Cosmetics.
2012-07-18 Sascha L. Teichmann Removed trailing whitespace.
2012-07-17 Felix Wolfsteller Added bandwidth field, i18n.
2012-07-17 Christian Lins Remove gwt dependency, add common-codecs.
2012-07-17 Christian Lins Issue #726 work.
2012-07-16 Felix Wolfsteller Cosmetics, docs.
2012-07-16 Ingo Weinzierl Tagged flys-client module as '2.8'.
2012-09-28 Thomas Arendsen Hein merged flys-backend/2.8 2.8
2012-07-15 Sascha L. Teichmann Removed same package imports.
2012-07-12 Sascha L. Teichmann MapResultTransformer: Added static INSTANCE because its stateless.
2012-07-12 Sascha L. Teichmann Backend: Strategy to directly transform native SQL results into Maps.
2012-07-12 Sascha L. Teichmann Fix for issue 359
2012-07-11 Sascha L. Teichmann Backend: Added DB indices for fasten access to cross section points.
2012-07-11 Sascha L. Teichmann Partial fix for flys/issue697: Increased the decimal places of Ws, Qs and Kms to 5.
2012-07-03 Ingo Weinzierl Set correct connection provider class which package had changed in the last commit.
2012-07-03 Ingo Weinzierl Fixed broken package declaration in DBCPConnectionProvider.
2012-06-29 Sascha L. Teichmann Backend: Added views to access the 'Amtlichen Linien'.
2012-06-15 Sascha L. Teichmann FLYS backend: Removed trailing whitespace.
2012-06-14 Sascha L. Teichmann SedDB: Make access to SedDB configurable over conf.xml and provide access to sessions.
2012-06-14 Sascha L. Teichmann Added Hibernate access class to SedDB
2012-06-14 Sascha L. Teichmann flys-backend: Re-establish cross platform compatibilty again.
2012-06-14 Ingo Weinzierl Added missing 'name' property and a new function to retrieve CrossSectionTracks.
2012-06-13 Ingo Weinzierl Store sq relations into database after parsing.
2012-06-13 Ingo Weinzierl Added parser and import classes to import MINFO sq relations.
2012-06-12 Ingo Weinzierl Cleared some irritating debug messages.
2012-06-12 Ingo Weinzierl Improved the import process to read MINFO specific 'Messstellen'.
2012-06-11 Sascha L. Teichmann Added Override annotation.
2012-06-11 Raimund Renkert Added filter for annotation names.
2012-06-08 Felix Wolfsteller Fix comment.
2012-06-08 Felix Wolfsteller Make it run again by removing hibernate annotation.
2012-06-07 Ingo Weinzierl Improved minfo db schema and added model classes for s/q relation.
2012-06-05 Sascha L. Teichmann Removed superfluous imports.
2012-05-27 Ingo Weinzierl Tagged module flys-backend as '2.7'.
2012-09-28 Thomas Arendsen Hein merged flys-artifacts/2.8
2012-07-15 Sascha L. Teichmann Removed same package imports.
2012-07-15 Sascha L. Teichmann Forget file to save.
2012-07-15 Sascha L. Teichmann FLYSArtifactCollection: Lowered log level.
2012-07-13 Felix Wolfsteller Let DC offer official lines for longitudinal disch. diags.
2012-07-13 Felix Wolfsteller Prevent nasty NPE.
2012-07-13 Sascha L. Teichmann SQ relation: Suppress data points with values <= 0 because they kill JFreeChart's log/log diagrams.
2012-07-13 Sascha L. Teichmann SQ relation: More fixes.
2012-07-13 Sascha L. Teichmann SQ relation: More fixes.
2012-07-13 Sascha L. Teichmann Fixed ChangeLog
2012-07-13 Sascha L. Teichmann SQ relation: Fixed problem with string operation precedence.
2012-07-13 Felix Wolfsteller Very basic official lines in dc, malplaced.
2012-07-13 Christian Lins Create shapefile directory instead of shapefile 'file'
2012-07-13 Sascha L. Teichmann Removed trailing whitespace.
2012-07-13 Sascha L. Teichmann SQ relation: Build a valid SQResult.
2012-07-13 Christian Lins Fix and workaround NullPointerExceptions
2012-07-13 Ingo Weinzierl Organized and added missing imports.
2012-07-13 Ingo Weinzierl Create extent of a map layer in the correct coordinate reference system.
2012-07-13 Ingo Weinzierl Moved map and WSPLGEN code to subpackage 'map' in the model package.
2012-07-13 Sascha L. Teichmann Removed trailing whitespace.
2012-07-13 Sascha L. Teichmann Removed superfluous imports.
2012-07-13 Sascha L. Teichmann SQ relation: Use only first time period.
2012-07-13 Raimund Renkert Added overview output for sq relation. Currently the overview generator is
2012-07-13 Raimund Renkert Refactored FLYSArtifactCollection.
2012-07-13 Sascha L. Teichmann SQ relation: Handle the error case of accessing wrong indexed SQ relation more smoothly.
2012-07-12 Sascha L. Teichmann SQ relation: Added access to the data of GSIEBSATZ and SSIEBUNG.
2012-07-12 Sascha L. Teichmann SQ relation: add left joins to GSIEBSATZ and SSIEBUNG
2012-07-12 Sascha L. Teichmann SQ relation: Do not store null values from database.
2012-07-12 Sascha L. Teichmann SQ relation: Added infrastructure to extract fractions from measurments.
2012-07-12 Sascha L. Teichmann SQ: First peek into fetching relevant data from SedDB
2012-07-12 Sascha L. Teichmann SQKMChartService: Fixed wrong logger class.
2012-07-12 Sascha L. Teichmann SQ: Filter out meassures which don't have a 'Siebsatz'
2012-07-12 Christian Lins Add showpointlabel style attribute
2012-07-12 Felix Wolfsteller Fix class name in conf.xml
2012-07-11 Felix Wolfsteller Various cosmetic doc fixes.
2012-07-11 Felix Wolfsteller Make official lines loadable from dc (by hand) for longitudinal sections.
2012-07-11 Felix Wolfsteller Back from past I
2012-07-11 Sascha L. Teichmann SQ: Added sieve
2012-07-11 Sascha L. Teichmann Removed trailing whitespace.
2012-07-11 Christian Lins Delta W(t) chart subtitle fixed
2012-07-11 Christian Lins Re-add HYK rendering code to CrossSectionGenerator
2012-07-10 Sascha L. Teichmann Back from the Future - II
2012-07-10 Sascha L. Teichmann Removed superfluous imports.
2012-07-10 Sascha L. Teichmann SQOverview: Made km separating of dates epsilon tolerant and avoid empty date lists.
2012-07-10 Raimund Renkert Added service for an overview chart of measuring points in sq relation.
2012-07-10 Felix Wolfsteller Fix issue694.
2012-07-10 Felix Wolfsteller Partial fix for issue694 (heightmarks snap to nearest cross section).
2012-07-10 Sascha L. Teichmann Removed trailing whitespace.
2012-07-10 Felix Wolfsteller Fix various documentation issues.
2012-07-10 Felix Wolfsteller Fix issues in 'documentation'.
2012-07-09 Felix Wolfsteller Configured javadoc mojo to include protected/private.
2012-07-08 Sascha L. Teichmann Create a list of direct sub themes of a theme.
2012-07-08 Felix Wolfsteller Added makefile for datacage conf doc.
2012-07-08 Felix Wolfsteller Cosmetics, doc.
2012-07-08 Sascha L. Teichmann Fixed XPath typo
2012-07-08 Sascha L. Teichmann Removed dynamic XPaths to pervent potential XPath injections.
2012-07-08 Sascha L. Teichmann Themes: Added XSL transformation to generate a better overview of the themes.
2012-07-08 Sascha L. Teichmann Themes: Name seconf themegroup 'second'
2012-07-08 Sascha L. Teichmann Themes: Added xml processing instructions.
2012-07-08 Sascha L. Teichmann Added vim lines.
2012-07-08 Sascha L. Teichmann Replaced tabs with four spaces each.
2012-07-08 Sascha L. Teichmann Removed superfluous imports.
2012-07-07 Sascha L. Teichmann Removed trailing whitespace
2012-07-06 Felix Wolfsteller We are back from the future now.
2012-07-06 Christian Lins Add styles for W(t) chart domain markers
2012-07-06 Christian Lins Add missing themes for fixation charts
2012-07-06 Felix Wolfsteller Fix issue705 (maín value names also in w/q-range mode).
2012-07-06 Christian Lins W(t) chart point label rotation working
2012-07-06 Felix Wolfsteller Cosmetics, removed TODO.
2012-07-06 Felix Wolfsteller Fix issue710 - crashing one-point-diagrams.
2012-07-06 Felix Wolfsteller Fix weird code with help of new ChartHelper.
2012-07-06 Felix Wolfsteller New ChartHelper method to expand bounds added.
2012-07-06 Felix Wolfsteller New Distance helper module.
2012-07-06 Christian Lins Remove HYK references/code from ChartGenerator
2012-07-05 Felix Wolfsteller Copied content from doc/datacage.txt to doc/datacage-config-manual (texed).
2012-07-05 Felix Wolfsteller Added stub of tex-version of datacage config documentation.
2012-07-04 Christian Lins Move annotation code to base class ChartGenerator
2012-07-04 Felix Wolfsteller Prevent wrong cast.
2012-07-04 Felix Wolfsteller issue487 (wrong area calculation).
2012-07-04 Ingo Weinzierl Improved the structure of themes.xml; moved theme groups to own XML files.
2012-07-03 Felix Wolfsteller Only show labels when activated in theme.
2012-07-03 Felix Wolfsteller Fix array-index-oobs in FixDeltaWtGenerator.
2012-07-03 Raimund Renkert Implemented mergeRanges to combine y bounds in timeseries charts.
2012-07-03 Raimund Renkert Added chart info generator for WQ and delta W(t) chart.
2012-07-03 Felix Wolfsteller Very basic point labels in DeltaWt-diagrams.
2012-07-03 Sascha L. Teichmann WINFOArtifact: minor code improvement when lookup if facet should be initially active.
2012-07-03 Sascha L. Teichmann Removed trailing whitespace.
2012-07-03 Ingo Weinzierl Added missing themes for middle bed height curves.
2012-07-03 Ingo Weinzierl Added new *Access objects for bed height calculation and flow velocity calculation; removed methods for specific data access from MINFOArtifact.
2012-07-03 Felix Wolfsteller Removed leading whitespaces.
2012-07-03 Felix Wolfsteller Fix issue695 (labels of waterlines).
2012-07-03 Ingo Weinzierl Fixed various bugs (package declarations, moved classes to correct places).
2012-07-03 Ingo Weinzierl Removed line properties from fixation point themes and added missing point properties.
2012-07-03 Felix Wolfsteller Cosmetics.
2012-07-02 Felix Wolfsteller issue654
2012-07-02 Sascha L. Teichmann FixA: flys/issue689: Export CSV for facet 'fix_parameters'
2012-07-01 Sascha L. Teichmann SQ: Connect calculation with artifact parameter access.
2012-07-01 Sascha L. Teichmann More braindead code removal.
2012-07-01 Sascha L. Teichmann FixA: Added AT writer for fitted functions.
2012-07-01 Sascha L. Teichmann Removed trailing whitespace.
2012-07-01 Sascha L. Teichmann FixA: Moved IdGenerator to top level class.
2012-06-30 Sascha L. Teichmann FixA: Added parameter exporter.
2012-06-30 Sascha L. Teichmann FixA: Moved DeltaWtExporter to fixings exporter package.
2012-06-29 Sascha L. Teichmann FixA: Tweaked the derivate diagram a bit and added chart info.
2012-06-29 Sascha L. Teichmann Removed superfluous imports.
2012-06-29 Sascha L. Teichmann FixA: Added chart info companion for FixLongitudinalSectionGenerator.
2012-06-29 Christian Lins Work in generalized annotations for chart generators
2012-06-28 Sascha L. Teichmann FixA: Fixed parameter name
2012-06-28 Sascha L. Teichmann SQ: finished the access stuff.
2012-06-28 Sascha L. Teichmann SQ: Added artifact access stub.
2012-06-28 Sascha L. Teichmann Added new base class for *Access
2012-06-28 Sascha L. Teichmann Removed dead code.
2012-06-28 Sascha L. Teichmann Removed dead code.
2012-06-28 Christian Lins Set text orientation to horizontal for points in Fixation W/Q curve
2012-06-28 Sascha L. Teichmann FixA: Only emit analysis period / discharge sectors which really contain data.
2012-06-28 Sascha L. Teichmann Moved FixationArtifactAccess to new access package.
2012-06-27 Sascha L. Teichmann FixA: Make fitting more tolerant.
2012-06-27 Sascha L. Teichmann FixA: Fixed da/dQ for exp function but the fitting still does not work.
2012-06-27 Christian Lins Only dates as point labels
2012-06-27 Christian Lins Fix typo in generator class for fix_longitudinal_section_curve
2012-06-27 Felix Wolfsteller Create and handle new manual line type facets.
2012-06-27 Felix Wolfsteller Register FacetType for upcoming facet.
2012-06-27 Felix Wolfsteller Added compatibility and theme for upcoming manual line facet.
2012-06-27 Christian Lins ChangeLog for last commit
2012-06-27 Christian Lins Add point labels to W/Q curve
2012-06-27 Sascha L. Teichmann Moved common code of the *Artifacts into FLYSArtifact.
2012-06-27 Christian Lins Fix for 'linecolor ignored' issue
2012-06-27 Sascha L. Teichmann Removed some expensive XPath usage.
2012-06-26 Sascha L. Teichmann SQ: Refactored fitting to better fit the data types of SQResult.
2012-06-26 Sascha L. Teichmann Removed trailing whitespace.
2012-06-26 Sascha L. Teichmann SQ: Added fitting shell for SQ curves.
2012-06-26 Sascha L. Teichmann SQ: Added specialized outlier test for the S/Q relation.
2012-06-26 Sascha L. Teichmann FixA: Only generate outlier facet when we done the prepocessing.
2012-06-26 Felix Wolfsteller Enable legend item aggreation in time series charts.
2012-06-26 Felix Wolfsteller Refactored legend item aggregation again.
2012-06-26 Felix Wolfsteller Extracted legenditemaggregation from xychartgenerator.
2012-06-26 Sascha L. Teichmann Removed trailing whitespace.
2012-06-26 Sascha L. Teichmann Completed inverse functions.
2012-06-26 Felix Wolfsteller Fix ChangeLog encoding
2012-06-26 Felix Wolfsteller flys-artifacts/trunk@4794 c6561f87-3c4e-4783-a992-168aeb5c3f6f
2012-06-26 Sascha L. Teichmann Fitting: Link the functions to there inverses via getInverse().
2012-06-26 Sascha L. Teichmann Added inverses of the fitting functions.
2012-06-25 Felix Wolfsteller Fix issue663 (step curves for longitudinal_section Qs).
2012-06-25 Felix Wolfsteller Progressed LegendItemAggregation.
2012-06-25 Sascha L. Teichmann FixA: Fixed typo in I18N key
2012-06-25 Sascha L. Teichmann FixA: Finished I18N for km chart service.
2012-06-25 Sascha L. Teichmann Removed trailing whitespace.
2012-06-25 Sascha L. Teichmann Removed superfluous import.
2012-06-25 Sascha L. Teichmann FixA: I18N for chart km service.
2012-06-25 Raimund Renkert FixA: Added longitudinal section chart.
2012-06-25 Raimund Renkert Look for the attribut "outline" in TimeseriesChartGenerator to render shape
2012-06-25 Raimund Renkert Do not add entries ending with " " to legend.
2012-06-25 Sascha L. Teichmann FixA: Prevent that the plot becomes to small if only one point is drawn.
2012-06-25 Sascha L. Teichmann FixA: Added more debug output.
2012-06-25 Sascha L. Teichmann Label more points in FixingsKMChartService
2012-06-25 Sascha L. Teichmann FixA: Interpolated and measured values where switched.
2012-06-25 Sascha L. Teichmann Added labeling for Q/W points FixingsKMChartService.
2012-06-25 Sascha L. Teichmann FixA: Re-added accidentially removed code.
2012-06-24 Sascha L. Teichmann Removed trailing whitespace.
2012-06-24 Sascha L. Teichmann FixA: I18N
2012-06-24 Sascha L. Teichmann Use generics more correctly
2012-06-24 Sascha L. Teichmann I18N: Added script to make keys of property file identifiable with short numbers through the UI.
2012-06-24 Sascha L. Teichmann I18N: Repaired inconsistencies
2012-06-24 Christian Lins Output code to trackdown the linecolor problem
2012-06-23 Felix Wolfsteller Re-enable legend item aggregation.
2012-06-23 Felix Wolfsteller Parse legend aggregation threshold value for settings.
2012-06-23 Sascha L. Teichmann Removed trailing whitespace.
2012-06-23 Sascha L. Teichmann FixA: KM chart helper service: Added debug output when creating Q sector markers.
2012-06-22 Felix Wolfsteller Initialize legend aggregation threshold.
2012-06-22 Felix Wolfsteller Cosmetics.
2012-06-22 Felix Wolfsteller Prepare legend aggregation threshold setting.
2012-06-22 Felix Wolfsteller Cosmetics.
2012-06-22 Sascha L. Teichmann FixA: Draw domain markers for borders of Q sectors in helper diagram.
2012-06-22 Sascha L. Teichmann FixA: Calculate the standard deviation of the Q sector delta Ws, too.
2012-06-21 Sascha L. Teichmann Fix: add method to find discharge sector border for given river and km.
2012-06-21 Sascha L. Teichmann FixA: Create a cached GaugeFinderFactory to access the gauge along a river
2012-06-21 Sascha L. Teichmann FixA: Moved GaugeFinder into top level class.
2012-06-21 Sascha L. Teichmann FixA: Made GaugeRange a top level class.
2012-06-21 Sascha L. Teichmann TimeseriesChartGenerator: Prevent some NPEs
2012-06-21 Sascha L. Teichmann Removed superfluous import.
2012-06-21 Sascha L. Teichmann FixA: Move Range out of FixingsOverview
2012-06-21 Sascha L. Teichmann FixA: Fixed problem with select the wrong meta data (date, descriptions, etc.) for a data column.
2012-06-21 Sascha L. Teichmann FixA: Fixed stupid i/j switch bug.
2012-06-21 Raimund Renkert Updated i18n for delta W(t) chart in fix analysis.
2012-06-21 Raimund Renkert Use different stylings for real and interpolated data points.
2012-06-21 Christian Lins Theme updates for sector average wq curves/points
2012-06-21 Christian Lins Adapt doAverageSectorOut() to reflect changes of corresponding facet.
2012-06-20 Raimund Renkert FixA: Added delta W(t) chart in fix analysis.
2012-06-20 Raimund Renkert Added new methods to add domain and value axis markers to time series plots.
2012-06-20 Raimund Renkert FixA: Added reference events to CSV export.
2012-06-20 Raimund Renkert FixA: Changed data type from QW[] to QWD[] to have delta Ws in reference events.
2012-06-20 Raimund Renkert FixA: Moved function instantiation to always have a valid function instance.
2012-06-20 Raimund Renkert Fixed binary search in Parameters.
2012-06-20 Sascha L. Teichmann Parameters: Bring binarySearch with epsilon more to source of binarySearch of Collections.
2012-06-20 Felix Wolfsteller fix issue680; hack.
2012-06-20 Felix Wolfsteller Cosmetics, docs.
2012-06-20 Felix Wolfsteller Cosmetics.
2012-06-20 Sascha L. Teichmann FixA: Respect the selected events and reference period correctly.
2012-06-20 Ingo Weinzierl Fixed broken naming of curves in SQ relation charts.
2012-06-20 Ingo Weinzierl Create a compound index for SQOutlierFacets based on result index and iteration number.
2012-06-20 Ingo Weinzierl The fake calculation for SQ relation now creates only values bigger than 0.
2012-06-20 Ingo Weinzierl Adjusted the color of SQ relation Facets.
2012-06-20 Ingo Weinzierl SQ relation now creates Facets with proper i18n labels.
2012-06-20 Ingo Weinzierl I18N of SQ relation charts.
2012-06-19 Felix Wolfsteller Fix issue681.
2012-06-19 Felix Wolfsteller Do not automatically load q-facets outside of w_differences.
2012-06-19 Felix Wolfsteller Added ChangeLog entry.
2012-06-19 Felix Wolfsteller Load q-type facets with w-facets for differences' base data.
2012-06-19 Sascha L. Teichmann Removed trailing whitespace.
2012-06-19 Sascha L. Teichmann SQ: Directly sample our Function objects instead of Function2D from JFreeChart.
2012-06-19 Sascha L. Teichmann Removed superfluous import.
2012-06-19 Sascha L. Teichmann FixA: Store the standard deviation of delta Ws of reference points into parameters, too.
2012-06-19 Sascha L. Teichmann FixA: Store into QWs if they are interpolated.
2012-06-19 Ingo Weinzierl Generate fake data for SQ curves; Implemented the Facet and Generator stuff.
2012-06-19 Sascha L. Teichmann SQ: Name derivative S'(Q).
2012-06-19 Felix Wolfsteller Extend compatibility list of facets for discharge-curves.
2012-06-19 Ingo Weinzierl Added theme mappings for sq relation fractions b - f.
2012-06-19 Ingo Weinzierl Create Facets for each SQResult and SQFractionResult.
2012-06-19 Sascha L. Teichmann SQ: Add new power function.
2012-06-19 Ingo Weinzierl Display measurements in SQ relation charts.
2012-06-19 Ingo Weinzierl Line labels are not visible until the option is set by the user (or configured in a theme).
2012-06-19 Sascha L. Teichmann conf.xml: Configure rest server and floodmap with external system entities.
2012-06-18 Sascha L. Teichmann FixA: Calculate Delta W(t) for reference points, too.
2012-06-18 Christian Lins Themes for fixing curves and debug output
2012-06-18 Sascha L. Teichmann Cosmetics: Added vim line, made class public.
2012-06-18 Sascha L. Teichmann De-centralized database configuration.
2012-06-18 Raimund Renkert Fixed constructor in AnalysisPeriod.
2012-06-18 Christian Lins Some fixing charts are generated now
2012-06-18 Ingo Weinzierl Apply point color in XYStyle.
2012-06-18 Ingo Weinzierl Added themes specific to MINFO SQ relation charts.
2012-06-18 Raimund Renkert Moved current km to context and added an abstract generator for fix analysis
2012-06-18 Sascha L. Teichmann Removed repeated x.size() calls from for loops.
2012-06-18 Sascha L. Teichmann Removed superfluous import.
2012-06-18 Sascha L. Teichmann Added missing 'else's in if/else ladders.
2012-06-18 Sascha L. Teichmann Fixed string comparision for identity.
2012-06-18 Sascha L. Teichmann Added missing vim lines.
2012-06-18 Sascha L. Teichmann FixA: Lowered log level in parameter interpolation.
2012-06-17 Christian Lins Fixing output generator hacking
2012-06-15 Raimund Renkert Added getData method with an additional km parameter.
2012-06-15 Ingo Weinzierl Added model classes for SQ calculation; generate fake results and improved the SQRelationGenerator which now draws the outliers.
2012-06-15 Raimund Renkert Added getter for current km in chart generator (used for navigation in fix
2012-06-15 Ingo Weinzierl Added chart and export generator stubs for SQ relation.
2012-06-15 Sascha L. Teichmann FLYS artifacts: Removed trailing whitespace.
2012-06-14 Sascha L. Teichmann SedDB: Added out commented block for SedDB configuration.
2012-06-14 Sascha L. Teichmann FixA: W/Q facet code cleanup.
2012-06-14 Sascha L. Teichmann FixA: Improved W/Q facet code
2012-06-14 Ingo Weinzierl Added component stubs for SQ relation calculation.
2012-06-14 Raimund Renkert Changed filter string to 'Messstelle' in minfo S-Q relation.
2012-06-14 Ingo Weinzierl Fetch only 'qps' cross section tracks for WSPLGEN calculation.
2012-06-13 Sascha L. Teichmann FixA facet: Use binary search again.
2012-06-13 Sascha L. Teichmann Removed superfluous import.
2012-06-13 Christian Lins Add FixDerivedCurveGenerator class
2012-06-13 Ingo Weinzierl Some minor bugfixes in fix analysis calculation and some more debug output.
2012-06-13 Sascha L. Teichmann FixA: Figure out max Q during fitting.
2012-06-13 Christian Lins Add missing imports.
2012-06-12 Christian Lins Move marker generation to XYChartGenerator
2012-06-12 Christian Lins FixWQCurveGenerator can generate charts from Fix*-Facets (in theory and not complete)
2012-06-12 Sascha L. Teichmann FixA: Add interpolation of parameters that better suits the instantiation real functions.
2012-06-11 Sascha L. Teichmann Removed superfluous imports.
2012-06-11 Sascha L. Teichmann Parameters: Linear interpolation of parameters.
2012-06-11 Raimund Renkert Added states and transitions for S-Q-relation.
2012-06-11 Sascha L. Teichmann Make it compilable again
2012-06-10 Christian Lins Try to workaround some exception in FixWQCurveFacet and FixWQCurveGenerator
2012-06-09 Christian Lins FixWQCurveGenerator generates randomized curves as the Facets crashes when retrieving data
2012-06-08 Felix Wolfsteller Interpolate wkms in computed discharges.
2012-06-07 Felix Wolfsteller Use cache.
2012-06-07 Felix Wolfsteller Added ommitted i18n change.
2012-06-07 Felix Wolfsteller Polished Gauge Discharges in computed discharge curves.
2012-06-07 Felix Wolfsteller cosmetics.
2012-06-07 Raimund Renkert Added i18n in fix analysis.
2012-06-07 Raimund Renkert Changed facet description in fix analysis.
2012-06-06 Felix Wolfsteller Cosmetics, doc.
2012-06-06 Felix Wolfsteller Fix certain GaugeDischargeArtifact-issues, import river.
2012-06-06 Felix Wolfsteller Fix certain GaugeDischargeArtifact issues.
2012-06-06 Felix Wolfsteller Documentation added.
2012-06-06 Raimund Renkert Added facet for derivate curve and fixed facet names.
2012-06-06 Felix Wolfsteller trivial doc.
2012-06-06 Felix Wolfsteller More datacage conf doc.
2012-06-06 Felix Wolfsteller Added accidentally ommitted Changes to CollisionFreeXYTextAnnotationEntity class.
2012-06-06 Raimund Renkert Added new facet for analysis periods and updated facet names in fix analysis.
2012-06-06 Felix Wolfsteller Added accidentally ommitted changed to datacage conf doc.
2012-06-06 Felix Wolfsteller Minor doc.
2012-06-06 Felix Wolfsteller More datacage conf doc.
2012-06-06 Raimund Renkert Implemented facets and splitted up the event facet.Implemented facets and splitted up the event facet.
2012-06-06 Sascha L. Teichmann JFreeChart: Added adapter class to bridge de.intevation.flys.artifacts.math.Function to org.jfree.data.function.Function2D.
2012-06-06 Felix Wolfsteller Added stub for datacage configuration documentation.
2012-06-06 Christian Lins FixWQChartGenerator
2012-06-06 Raimund Renkert Fixed outputmodes in fix analysis.
2012-06-06 Sascha L. Teichmann FixA: Local variable shadowed instance variable.
2012-06-06 Sascha L. Teichmann FixA: Fixed index problem with name of chi^2.
2012-06-06 Raimund Renkert Added facets for fix analysis.
2012-06-05 Sascha L. Teichmann FixA: Added binary search methods for parameters.
2012-06-05 Sascha L. Teichmann FixA: Use new data structures in Delta W(t) exporter. Removed obsolete code.
2012-06-05 Sascha L. Teichmann FixA: Prevent duplicates in analysis periods.
2012-06-05 Sascha L. Teichmann FixA: Removed obsolete class.
2012-06-05 Felix Wolfsteller Avoid collisions between line labels.
2012-06-05 Sascha L. Teichmann FixA: Store the referenced QW for each km, too.
2012-06-05 Sascha L. Teichmann FixA: Removed obsolete FixResults class.
2012-06-05 Sascha L. Teichmann FixA: Store AnalysisPeriods into FixResult now.
2012-06-05 Ingo Weinzierl Let Artifacts of type WMSDBArtifact remove produced files and directories when endOfLife() is called.
2012-06-05 Felix Wolfsteller New helper.
2012-06-05 Felix Wolfsteller i18n and format for line labels.
2012-06-05 Christian Lins FixWQChartGenerator stub added
2012-06-05 Felix Wolfsteller Added better doc and todo.
2012-06-05 Sascha L. Teichmann FixA: Use KMIndex for outliers.
2012-06-05 Sascha L. Teichmann FixA: Added new serializable km inedx structure.
2012-06-05 Sascha L. Teichmann EpsilonComparator: Fixed sign problem in comparison.
2012-06-04 Sascha L. Teichmann FixA: Reactivated rewrite of the outlier checks.
2012-06-04 Sascha L. Teichmann FixA: Store Chi^2 of fitting into result, too.
2012-05-31 Sascha L. Teichmann FixA: Added the derivatives of all fitting functions.
2012-05-30 Sascha L. Teichmann FixA: Calculate the Delta W/ts + the average Delta W/ts per Q sector per analysis period.
2012-05-30 Sascha L. Teichmann Added class to average dates without overflows.
2012-05-30 Sascha L. Teichmann FixA: Added new km filter
2012-05-30 Sascha L. Teichmann Fix: Better model for storing results of the delta W/t calculation.
2012-05-30 Sascha L. Teichmann Forgot ChangeLog commit
2012-05-30 Sascha L. Teichmann FixA: Explicit model for date ranges.
2012-05-30 Sascha L. Teichmann FixA: Added method to classify fixing events for certain kms.
2012-05-30 Sascha L. Teichmann FixA: Fixed access to analysis periods.
2012-05-30 Raimund Renkert Changed data fields in fixings analysisperiods state.
2012-05-29 Felix Wolfsteller Cosmetics and ommitted fix.
2012-05-29 Felix Wolfsteller issue417: duration curve main values as line(s) to curve.
2012-05-29 Felix Wolfsteller Doc and TODOs added.
2012-05-29 Felix Wolfsteller Respect new theme setting when drawing line to curve.
2012-05-29 Felix Wolfsteller Added own themes for mainvalues.
2012-05-28 Sascha L. Teichmann FixA: corrected fitting (Q->W instead W->Q).
2012-05-28 Sascha L. Teichmann FixA: Made Delta W/t calculation finally work
2012-05-28 Sascha L. Teichmann FixA: Added facet to return delta w/t as CSV
2012-05-27 Sascha L. Teichmann FixA: Fixed class cast bug in report facet.
2012-05-27 Sascha L. Teichmann FixA: Added forgotten csv/report facets/generators to conf.
2012-05-27 Ingo Weinzierl Added more checks in CrossSectionFactory.isNewst() to prevent IndexOutOfBoundsExceptions.
2012-05-27 Ingo Weinzierl Tagged module flys-artifacts as '2.7'.
2012-07-15 Sascha L. Teichmann Removed same package imports.
2012-07-13 Felix Wolfsteller Added 18n for datacage officiallines.
2012-07-13 Sascha L. Teichmann Corrected broken web.xml
2012-07-13 Bjoern Ricks Add UserClient class to handle REST communication for user related interfaces.
2012-07-13 Christian Lins Add "Manage themes" button to ChartToolbar and MapToolbar.
2012-07-13 Raimund Renkert Switched from 2 columns and 3 rows to 3 columns and 2 rows in sq chart overview.
2012-07-13 Sascha L. Teichmann Removed superfluous imports.
2012-07-13 Sascha L. Teichmann Cosmetics in plain authentication
2012-07-13 Bjoern Ricks Add javadoc for the user class
2012-07-13 Bjoern Ricks Implement getting a list of roles from a logged in user
2012-07-13 Raimund Renkert Added chart overview to sq relation in minfo module.
2012-07-13 Bjoern Ricks Removed System.out.println debug statement for the request uri
2012-07-13 Bjoern Ricks Removed trailing whitespace
2012-07-13 Bjoern Ricks Implement re-authentication if the user (ticket) has expired.
2012-07-13 Bjoern Ricks Add ChangeLog entry for last commit
2012-07-13 Bjoern Ricks Use servlet context to specify the authentication method.
2012-07-13 Bjoern Ricks Add css for the error box at the login page
2012-07-13 Bjoern Ricks Also log an authentication failure
2012-07-13 Bjoern Ricks Display error details to the user
2012-07-13 Bjoern Ricks Extend Authentication and Response to throw additional exceptions
2012-07-13 Bjoern Ricks Update changelog for last commit changes
2012-07-13 Bjoern Ricks Derive was User class from new DefaultUser class
2012-07-12 Sascha L. Teichmann Set artifact server port back to 8181
2012-07-12 Sascha L. Teichmann Login: Cast session user to abstract type not WAS specific
2012-07-12 Sascha L. Teichmann Removed superfluous imports.
2012-07-12 Ingo Weinzierl Bugfix: #698 Fix-Analysis is working in Tomcat again.
2012-07-12 Christian Lins Add showpointlabel style attribute.
2012-07-11 Sascha L. Teichmann Omitted last ChangeLog save.
2012-07-11 Sascha L. Teichmann Auth: added simple file based authentication.
2012-07-11 Sascha L. Teichmann Removed trailing whitespace.
2012-07-11 Sascha L. Teichmann Removed superfluous imports.
2012-07-11 Bjoern Ricks Refactor GGInA authentication
2012-07-11 Bjoern Ricks Check filter config in web.xml for String false to deactivate the GGInAFilter instead of "1".
2012-07-11 Christian Lins Add alpha transp. and fix exceptions on unknown style attributes.
2012-07-11 Raimund Renkert Added overview chart to sq relation period input panel.
2012-07-11 Bjoern Ricks Filter all requests to FLYS
2012-07-11 Bjoern Ricks Add stylesheets for the login page
2012-07-11 Bjoern Ricks Implement a login page to be able to authenticate a user
2012-07-11 Bjoern Ricks Add a TrustStategy to be able to ignore SSL Certificate issues with GGinA
2012-07-11 Bjoern Ricks Add WAS user class
2012-07-10 Sascha L. Teichmann WAS response: Directly use Base64InputStream instead of reading it first into memory.
2012-07-10 Bjoern Ricks Update pom dependencies for new WAS classes
2012-07-10 Bjoern Ricks Fix String comparision in WAS Response class
2012-07-10 Bjoern Ricks Add missing + from last commit
2012-07-10 Bjoern Ricks Implement class representation of a Web Authentication Service (WAS)
2012-07-08 Sascha L. Teichmann Bumped GWT up to 2.4
2012-07-08 Felix Wolfsteller Minor Cosmetics.
2012-07-08 Felix Wolfsteller Cosmetics, whitespaces, docs.
2012-07-08 Sascha L. Teichmann Removed superfluous imports.
2012-07-08 Felix Wolfsteller Fix issue706.
2012-07-07 Sascha L. Teichmann Removed trailing whitespace
2012-07-06 Raimund Renkert Fixed zooming in navigatable charts.
2012-07-03 Raimund Renkert Add km to chart info request parameters to get valid chart infos.
2012-07-03 Felix Wolfsteller issue457
2012-07-02 Sascha L. Teichmann Forget to commit one i8n file.
2012-07-02 Sascha L. Teichmann FixA: Added i18n strings for export of adjusted coefficients.
2012-07-02 Sascha L. Teichmann Export panel: Make code more robust when trying to resolve missing i18n strings.
2012-06-28 Felix Wolfsteller Show area menu also for newer manual wsp line facet.
2012-06-28 Felix Wolfsteller Improved manual wsp input validation.
2012-06-28 Felix Wolfsteller Minor Manual WSP editor polish.
2012-06-28 Felix Wolfsteller Nicen Manual WSP editor.
2012-06-28 Felix Wolfsteller New i18n for WSP editor.
2012-06-27 Felix Wolfsteller Added basic GUI for manual WSPs in cross sections.
2012-06-27 Felix Wolfsteller Minor refactoring.
2012-06-25 Sascha L. Teichmann FixA: Make the km chart helper panel more useful.
2012-06-25 Sascha L. Teichmann FixA: Do not throw layout away if only the km chart needs reloading.
2012-06-23 Sascha L. Teichmann Removed trailing whitespace.
2012-06-22 Sascha L. Teichmann Bumped SmartGWT to version 3.0
2012-06-22 Sascha L. Teichmann FixA: Limit the number of displayed selected fixings to 5.
2012-06-21 Raimund Renkert Changed handler for km navigation in fix analysis charts.
2012-06-21 Sascha L. Teichmann Create simplified column filter.
2012-06-21 Sascha L. Teichmann Added more debug output about the transmitted fix overview documents.
2012-06-21 Sascha L. Teichmann Removed some XPath misuse.
2012-06-21 Sascha L. Teichmann FixA: Set discharge sectors 0 and 3 as default in UI.
2012-06-21 Sascha L. Teichmann FixA: Overview: render column header too when rendering checkboxes.
2012-06-20 Sascha L. Teichmann FixA: Extent of overview is determined by min/max km of sectors.
2012-06-20 Sascha L. Teichmann Removed superfluous import.
2012-06-20 Felix Wolfsteller Fix zoom/export issue665, issue459, issue667.
2012-06-18 Ingo Weinzierl Added missing StyleHelper class from last commit.
2012-06-18 Ingo Weinzierl Show only style attributes in StyleEditorWindow that are not 'hidden'.
2012-06-18 Ingo Weinzierl Added i18n strings for theme editor.
2012-06-15 Raimund Renkert Added navigation to fix analysis charts.
2012-06-15 Sascha L. Teichmann FLYS client: Removed trailing whitespace.
2012-06-15 Ingo Weinzierl Reverted accidently commited port changes from last commit.
2012-06-14 Ingo Weinzierl Added chart and export titles for sq relation in MINFO
2012-06-14 Raimund Renkert Add all events to the list of selected events in fix analysis.
2012-06-14 Raimund Renkert Changed helper chart size in Fix analysis to avoid overlapping in maximized project window.
2012-06-14 Raimund Renkert Render checked checkboxes in html event overview.
2012-06-11 Sascha L. Teichmann Removed superfluous imports.
2012-06-11 Raimund Renkert Added UI for S-Q-relation parameters in minfo module.
2012-06-07 Felix Wolfsteller cosmetic.
2012-06-07 Raimund Renkert Removed duplicated i18n methods.
2012-06-07 Raimund Renkert Added i18n strings.
2012-06-07 Ingo Weinzierl Added i18n stubs for fix analyses to continue working with the GUI.
2012-06-05 Sascha L. Teichmann Removed superfluous imports.
2012-06-05 Raimund Renkert Fixed creation of initial date string in fixings parameters.
2012-06-04 Felix Wolfsteller Register GGInAFilter.
2012-06-04 Felix Wolfsteller Cosmetics, docs.
2012-06-03 Felix Wolfsteller Stub for A&A Servlet Filter.
2012-06-01 Sascha L. Teichmann FixA: Fixed descriptions of Q sectors in input provider.
2012-06-01 Raimund Renkert Changed numbers in gauge sector selection state to strings.
2012-06-01 Raimund Renkert Set initial values for start and end date in fix analysis date panels.
2012-06-01 Raimund Renkert Removed some debug outputs.
2012-06-01 Raimund Renkert Implemented filter for fix analysis helper widgets.
2012-05-30 Raimund Renkert Added ui provider for multiple date range input in fix analysis.
2012-05-29 Felix Wolfsteller Added i18n strings for new theme properties for mainvalues.
2012-05-28 Sascha L. Teichmann Added i18n strings used by Delta W/t export of the fixing analysis.
2012-05-28 Ingo Weinzierl Added i18n string for floodmap datacage.
2012-05-27 Ingo Weinzierl Corrected image path to add_wms.png
2012-05-27 Ingo Weinzierl Tagged module flys-client as '2.7'.
2012-09-28 Thomas Arendsen Hein merged flys-backend/2.7 2.7
2012-05-27 Ingo Weinzierl Tagged module flys-backend as '2.7'.
2012-05-18 Ingo Weinzierl Added lower and upper km to functions that return bed height singles and epochs for a given river.
2012-05-18 Ingo Weinzierl Fixed a typo.
2012-05-18 Ingo Weinzierl Added functions to retrieve bed height single and epoch values based on its owner and km range.
2012-05-18 Ingo Weinzierl Added functions to BedHeightSingle and BedHeightEpoch to get instances from db by id or river.
2012-05-15 Ingo Weinzierl Added functions to retrieve data from database.
2012-05-15 Ingo Weinzierl Added DischargeZone.getDischargeZones() that returns all DischargeZones for a given river.
2012-05-10 Ingo Weinzierl Added new model class GaugeLocation for storing locations of gauges.
2012-05-10 Ingo Weinzierl Added HydrBoundary and HydrBoundaryPoly and adapted method signatures of Line and Building.
2012-05-10 Ingo Weinzierl The python crosssectiontrack importer now also searches for 'STATION' field to extract the current km.
2012-05-08 Ingo Weinzierl Modified Hws.getHws() to retrieve more specific hws.
2012-05-08 Ingo Weinzierl Modified Catchment.getCatchments() to retrieve specific catchments.
2012-05-08 Ingo Weinzierl Changed the geometry type of 'catchments' from polygon to multipolygon.
2012-05-08 Ingo Weinzierl Added an sql script to insert dems for Saar, Mosel and Elbe into database.
2012-05-04 Ingo Weinzierl New shape importers and schema modifications.
2012-05-03 Ingo Weinzierl Added further shape importers and added the option to reproject shapes during the import process.
2012-05-02 Sascha L. Teichmann Use Doubles to store meassure points of profiles.
2012-04-27 Sascha L. Teichmann Removed superfluous imports.
2012-04-27 Sascha L. Teichmann Adjusted PostgreSQL port of MINFO schema to match Oracle one.
2012-04-27 Ingo Weinzierl Adapted annotation types.
2012-04-27 Ingo Weinzierl Added SQL file to drop WINFO specific db schema.
2012-04-27 Ingo Weinzierl Made SQL instructions upper case.
2012-04-27 Ingo Weinzierl Added an SQL file to drop the spatial schema.
2012-04-27 Ingo Weinzierl Improved the python shapefile importer.
2012-04-26 Ingo Weinzierl Repaired broken oracle spatial schema.
2012-04-26 Ingo Weinzierl Parse and store MINFO waterlevel differences; added config option to skip this process.
2012-04-26 Ingo Weinzierl Added a parser and importer classes used to import waterlevel differences.
2012-04-26 Ingo Weinzierl Added missing constraint to relation 'waterlevel_difference'.
2012-04-25 Felix Wolfsteller Fix for wrong method name in WaterlevelDifferenceValue hibernated class.
2012-04-24 Ingo Weinzierl Added model classes for MINFO specific waterlevel differences.
2012-04-24 Ingo Weinzierl Improved the db schema to store MINFO specific waterlevel differences.
2012-04-24 Ingo Weinzierl Completed the MINFO waterlevel import.
2012-04-24 Ingo Weinzierl Prepared the importer to import MINFO specific waterlevel values and added a stub for a parser.
2012-04-20 Ingo Weinzierl Added importer classes used for MINFO specific waterlevel import.
2012-04-20 Ingo Weinzierl Added new model classes for MINFO specific waterlevel data.
2012-04-20 Ingo Weinzierl Added MINFO specific waterlevel relations.
2012-04-19 Ingo Weinzierl Added a parser for sediment yield files; started parsing and store values in db.
2012-04-19 Ingo Weinzierl Added config option to skip parsing sediment yield data and prepared the importer to read/store those data.
2012-04-19 Ingo Weinzierl Added new importer classes for importing sediment yield data.
2012-04-18 Ingo Weinzierl Added new model classes for sediment yield data.
2012-04-18 Ingo Weinzierl Added missing river_id column to sediment_yield relation.
2012-04-18 Ingo Weinzierl Removed superflous imports.
2012-04-18 Ingo Weinzierl Improved the db schema to store sediment yield values.
2012-04-18 Ingo Weinzierl Finished flow velocity data import: finished parsing meta data of model files and repaired broken HQL statements.
2012-04-17 Ingo Weinzierl Added new parser for flow velocity measurements and fixed some smaller bugs while importing flow velocity data.
2012-04-17 Ingo Weinzierl Added importer classes used during the import process of flow velocity measurements.
2012-04-17 Ingo Weinzierl Added new model classes for storing flow velocity measurements.
2012-04-17 Ingo Weinzierl Added MINFO specific relations for flow velocity measurements.
2012-04-17 Ingo Weinzierl Added a parser for flow velocity model data and adjusted the db relation schema (missing q column).
2012-04-17 Ingo Weinzierl Added temp classes used during the import process of flow velocity data.
2012-04-17 Ingo Weinzierl Prepared the importer to parse flow velocity files and added a config option to skip that process.
2012-04-17 Ingo Weinzierl Added new model classes for MINFO specific flow velocity.
2012-04-16 Ingo Weinzierl Improved the oracle db schema for MINFO specific flow velocity values.
2012-04-13 Sascha L. Teichmann Add MINFO schema for PostgreSQL
2012-04-13 Ingo Weinzierl Added missing annotation in MorphologicalWidth for values.
2012-04-13 Ingo Weinzierl Added parser for parsing morphological widths.
2012-04-13 Ingo Weinzierl Added a config option to skip parsing morphological widths.
2012-04-13 Ingo Weinzierl Tiny schema modification specific to MINFO morphological width values; added importer classes.
2012-04-13 Ingo Weinzierl Improved the MIFNO DB schema for morphological width and added model classes.
2012-04-13 Ingo Weinzierl Finished parsing MINFO specific sediment density.
2012-04-13 Ingo Weinzierl Implemented the method stubs of the parser for sediment density and made some db schema adaptions.
2012-04-13 Ingo Weinzierl Added new parser (stub) to read MINFO sediment density files; prepared import process to handle those files.
2012-04-13 Ingo Weinzierl Added a new config option to skip parsing MINFO sediment density values.
2012-04-13 Ingo Weinzierl Added new importer classes used during MINFO sediment density import.
2012-04-13 Ingo Weinzierl Improved the MINFO db schema and added model classes for storing sediment density values specific to a river and depth.
2012-04-13 Ingo Weinzierl Finished importing MINFO bed heights (single and epoch).
2012-04-12 Ingo Weinzierl Implemented model classes and importer classes for bed height epochs.
2012-04-12 Ingo Weinzierl Finished work on MINFO bed heights (single).
2012-04-11 Ingo Weinzierl Finished work on parsing meta information and data specific to single bed heights files in MINFO.
2012-04-11 Ingo Weinzierl Some oracle db schema adaptions specific to bed heights in MINFO.
2012-04-11 Ingo Weinzierl Initial checkin for parsing MINFO bed heights.
2012-04-11 Ingo Weinzierl First things for MINFO specific database schema.
2012-03-29 Ingo Weinzierl Added a new config option to specify a INFO.gew file by system property.
2012-03-19 Ingo Weinzierl Adapted the column type of relation 'dem' in oracle-spatial schema.
2012-03-19 Ingo Weinzierl Registered missing Floodmaps and set its Geometry type to Geometry.
2012-03-16 Ingo Weinzierl Tagged module 'flys-backend' as 'pre2.7-2012-03-16'.
2012-03-16 Ingo Weinzierl Modified the oracle db schema (relation 'floodmaps').
2012-03-08 Ingo Weinzierl Added model class for 'floodmaps'.
2012-03-07 Ingo Weinzierl Added a python tool to import shapefiles into database.
2012-03-07 Ingo Weinzierl Adapted the PostgreSQL schema for floodmaps.
2012-03-06 Ingo Weinzierl Improved the db schema for storing existing floodmaps.
2012-03-06 Ingo Weinzierl Adapted wrong method call of Log4J logger.
2012-03-02 Felix Wolfsteller Fix or workaround flys/issue632, avoid NPE.
2012-09-28 Thomas Arendsen Hein merged flys-artifacts/2.7
2012-05-29 Ingo Weinzierl Merged revisions 4539-4540,4543,4545-4546 via svnmerge from
2012-05-27 Ingo Weinzierl Merged revisions 4536 via svnmerge from
2012-05-27 Ingo Weinzierl Tagged module flys-artifacts as '2.7'.
2012-05-27 Ingo Weinzierl Fixed broken crosssection chart creation if no hyks are existing.
2012-05-26 Sascha L. Teichmann Removed superfluous imports.
2012-05-26 Sascha L. Teichmann FixA: Added CSV export for Delta W/t values.
2012-05-26 Sascha L. Teichmann FixA: Return correct data structure from calculation.
2012-05-26 Sascha L. Teichmann FixA: Fixed stupid index bug.
2012-05-26 Sascha L. Teichmann FixA: Call computing when reaching the compute state.
2012-05-25 Sascha L. Teichmann FixA: km indexed datastructure for delta w/t results.
2012-05-25 Ingo Weinzierl Corrected config for wms fixpoints and floodmaps.
2012-05-25 Felix Wolfsteller Fix ChangeLog
2012-05-25 Felix Wolfsteller Improved 'line-to-curve' rendering.
2012-05-25 Sascha L. Teichmann Replaced another silly "@attribute" XPATH with direct getAttribute() call.
2012-05-25 Felix Wolfsteller Also draw lines from q mainvalues to duration curve.
2012-05-25 Felix Wolfsteller Slightly improved 'line-to-curve' creation of w-mainvalues/durationcurve.
2012-05-25 Felix Wolfsteller Fixed ChangeLog.
2012-05-25 Felix Wolfsteller Draw line from w-annotation to duration curve, rough version.
2012-05-25 Raimund Renkert Added a warning to not use virtual themes for facets.
2012-05-25 Raimund Renkert Added concrete themes for maps.
2012-05-25 Felix Wolfsteller Minor refactoring.
2012-05-25 Raimund Renkert Added concrete themes for areas.
2012-05-24 Felix Wolfsteller Precised DC config.
2012-05-24 Felix Wolfsteller Let Generators handle slightly more types.
2012-05-24 Felix Wolfsteller Added accidentally omitted file.
2012-05-24 Felix Wolfsteller Cosmetic
2012-05-24 Felix Wolfsteller Allow easy change of sticky axis for annotations.
2012-05-24 Felix Wolfsteller Prepare improved Discharge curve compatibility.
2012-05-24 Raimund Renkert Issue 667.
2012-05-24 Ingo Weinzierl Removed needless imports.
2012-05-24 Ingo Weinzierl Reproject geometries before exporting them as shapefiles to filesystem.
2012-05-24 Felix Wolfsteller Include thematic heights in dc conf for reference curves.
2012-05-24 Felix Wolfsteller Cosmetics.
2012-05-24 Felix Wolfsteller Remove relativepoint artifact remainders.
2012-05-24 Felix Wolfsteller Create points for ref.curve in facet, handle these in generator.
2012-05-24 Felix Wolfsteller Expose reference curve parameters via blackboard.
2012-05-24 Felix Wolfsteller Expose reference curve parameters via blackboard.
2012-05-24 Felix Wolfsteller Fixation relative points in reference curves.
2012-05-24 Felix Wolfsteller Made data accessors for reference curve parameter public.
2012-05-24 Felix Wolfsteller Add relativepoint to compatibility list of reference curve out.
2012-05-23 Felix Wolfsteller Polish: theme for relativepoint, removal of wrong facet in compatibility list.
2012-05-23 Felix Wolfsteller Serve heightmarks and floodprotection in dc conf for duration curves.
2012-05-23 Felix Wolfsteller Handle relative points in duration curve diagram.
2012-05-23 Felix Wolfsteller Add relative-points-fixations for duration curves in dc conf.
2012-05-23 Felix Wolfsteller Take advantage of refactorisation.
2012-05-23 Felix Wolfsteller Handle case of points in wqday (durationcurve) scenarios.
2012-05-23 Felix Wolfsteller Let DurationCurveFacet provide relevant data via Blackboard.
2012-05-23 Felix Wolfsteller Add helper to allow for points at duration curve facet.
2012-05-23 Sascha L. Teichmann FixA: Calculate Delta W/t, too.
2012-05-23 Felix Wolfsteller Added (dummy-) implementation of relative point facet in staticwkms case.
2012-05-23 Raimund Renkert Improved startup performance.
2012-05-23 Felix Wolfsteller Refactor usage of now static xpath, other artifacts will follow in later commits.
2012-05-23 Felix Wolfsteller Refactor static xpath, other artifacts will come in a later commit.
2012-05-23 Felix Wolfsteller Whitespaces.
2012-05-23 Felix Wolfsteller Pre-work for upcoming RelativePoint-Artifact.
2012-05-23 Raimund Renkert Introduced theme groups and added new service to get themes filtered by name.
2012-05-23 Felix Wolfsteller Modify Cross-Section DC conf to allow loading of waterlevels, fixations and heightmarks.
2012-05-23 Felix Wolfsteller Cosmetics in winfo state xml.
2012-05-22 Felix Wolfsteller More debugging of discharge curve issue.
2012-05-22 Felix Wolfsteller More debugging of discharge-curve issue.
2012-05-22 Felix Wolfsteller Adjusted dc conf.
2012-05-22 Felix Wolfsteller Handle 'classical' discharges, theoretically.
2012-05-22 Felix Wolfsteller Add cross-section output to dischargelong.section.
2012-05-22 Sascha L. Teichmann Added Fix calculation.
2012-05-22 Felix Wolfsteller Cosmetics.
2012-05-22 Sascha L. Teichmann Fixings: Adjusted ui providers to make parameter names unique in client.
2012-05-22 Sascha L. Teichmann Fixings state access: Added more debug putput
2012-05-22 Sascha L. Teichmann Fixing analysis: Access to state data.
2012-05-22 Sascha L. Teichmann Make start/end parameter names unique in fixing artifacts.
2012-05-22 Felix Wolfsteller Added skeleton for gauge discharge curves.
2012-05-21 Felix Wolfsteller Allow loading of previous reference curves.
2012-05-21 Felix Wolfsteller Prepare reference curve dc conf.
2012-05-21 Raimund Renkert Added i18n strings for fix analysis.
2012-05-21 Raimund Renkert Adjusted fixings transitions and implemented event select state.
2012-05-21 Felix Wolfsteller Include km in duration curve facets names.
2012-05-21 Felix Wolfsteller Allow to load previous DurationCurves and fixations in Dur.C. via DC.
2012-05-18 Ingo Weinzierl Only offer soundings that fit to the current km range in MINFO bed height workflow.
2012-05-18 Ingo Weinzierl Added chart generator for middle bed height charts.
2012-05-18 Ingo Weinzierl Added an exporter for middle bed height values.
2012-05-18 Ingo Weinzierl Start MINFO middle bed height calculation in the relevant state and creates facets for chart and csv.
2012-05-18 Ingo Weinzierl Implemented SoundingsSelect.getOptions() and SoundingsSelect.getLabelFor().
2012-05-16 Felix Wolfsteller More stable legend item aggregation.
2012-05-16 Felix Wolfsteller Cosmetics (docs).
2012-05-16 Ingo Weinzierl Added states and improved transition model for MINFO middle bed height calculation.
2012-05-16 Ingo Weinzierl Adapted the dynamic DESCRIBE creation of MultiIntArrayState to be able to use default mechanisms in FLYS client.
2012-05-16 Sascha L. Teichmann Deliver description on events instead of names in fixing overview.
2012-05-16 Ingo Weinzierl Create chart facets for flow velocity calculation and a chart generator for this.
2012-05-16 Ingo Weinzierl Improved the MultiIntArrayState, so the clients are able to display human readable strings for parameters and its values.
2012-05-16 Ingo Weinzierl Added new i18n strings for MINFO states.
2012-05-16 Ingo Weinzierl Finalized the CSV export of MINFO flow velocity calculation.
2012-05-16 Ingo Weinzierl Added state, calculation and csv exporter for MINFO flow velociy calculation.
2012-05-16 Ingo Weinzierl Moved the implementation of getDataAsDouble() from concrete Artifacts into FLYSArtifact.
2012-05-15 Raimund Renkert Changed data type for state 'eventselect' in fix-analysis.
2012-05-15 Sascha L. Teichmann Removed superfluous imports.
2012-05-15 Raimund Renkert Implemented states for fix-analysis.
2012-05-15 Raimund Renkert Fixed constructor in class 'Function'.
2012-05-15 Ingo Weinzierl Improved the states for MINFO flow velocity calculation.
2012-05-14 Sascha L. Teichmann Added model to store fitting results into cache.
2012-05-14 Ingo Weinzierl Removed the unused computeFeed() from ComputationRangeState to make this State ready to use it in MINFO calculations.
2012-05-14 Ingo Weinzierl Started module MINFO (MINFOArtifact, state to choose calculations, configurations).
2012-05-13 Felix Wolfsteller Removed unused code.
2012-05-13 Felix Wolfsteller Added documentation.
2012-05-13 Felix Wolfsteller Add duration_curve.q loading via datacage.
2012-05-11 Felix Wolfsteller Show HYKS in datacage also in non-recommendation mode.
2012-05-11 Felix Wolfsteller Improved middle height calculations.
2012-05-11 Felix Wolfsteller Progressed area calculation while line computation a bit.
2012-05-11 Felix Wolfsteller Added accidentally ommitted changes.
2012-05-11 Felix Wolfsteller Fix water-through-mountain in cross sections.
2012-05-10 Ingo Weinzierl Added support for WMS gauges in floodmaps and maps.
2012-05-10 Ingo Weinzierl Improved datacage configuration for floodmaps and maps and modified the WMS layer artifacts to support names for layers.
2012-05-10 Ingo Weinzierl Added a PROJECTION section for all missing mapserver templates.
2012-05-10 Felix Wolfsteller Minor refactoring, docs.
2012-05-10 Ingo Weinzierl Added a Mapserver PROJECTION section into the shapefile template.
2012-05-10 Felix Wolfsteller Minimal doc, TODO.
2012-05-10 Felix Wolfsteller Fix issue620: synchron navigation at impossible km.
2012-05-10 Felix Wolfsteller Minimal cosmetics.
2012-05-10 Felix Wolfsteller More stable waterlinefacet, in prep for fix issue620.
2012-05-09 Felix Wolfsteller Corrected date in ChangeLog entry.
2012-05-09 Felix Wolfsteller Added and respect theme prop whether or not to display (not yet calculated) middle height.
2012-05-09 Felix Wolfsteller Beginnings of mittlere hoehe calculation.
2012-05-08 Ingo Weinzierl Modified floodmap specific datacage configuration and improved WMS hws layer.
2012-05-08 Ingo Weinzierl Modified floodmap specific datacage configuration and improved WMS catchment layer.
2012-05-08 Ingo Weinzierl Modified configuration of facets for 'map' and theme for floodmap lines.
2012-05-08 Ingo Weinzierl Added a PROJECTION section to all db mapserver layers.
2012-05-07 Raimund Renkert Modified states and added new state for fixing analysis.
2012-05-04 Felix Wolfsteller Respect area label bg text style, draw label roughly at centroid of polygons (sofar, better but not yet good).
2012-05-03 Felix Wolfsteller Allow basic and styled area labels, yet on static position within plot.
2012-05-03 Felix Wolfsteller More concrete Area theme. Experimentally disabled duplicate Lines theme.
2012-05-03 Felix Wolfsteller Fix area creation.
2012-05-03 Felix Wolfsteller Added and respect two new properties of waterlevels in cross-sections.
2012-05-03 Felix Wolfsteller Respect show line label bg setting.
2012-05-03 Ingo Weinzierl Added 'helpText' fields to the transition model.
2012-05-02 Felix Wolfsteller Respect colors of theme for linelabels.
2012-05-02 Felix Wolfsteller Actually use font specified in theme document for linelabel.
2012-05-02 Felix Wolfsteller Change default for showbg of linelabel theme.
2012-05-02 Felix Wolfsteller Cosmetic, added annotation.
2012-05-02 Felix Wolfsteller Parse more theme properties for linelabels.
2012-05-02 Sascha L. Teichmann Make it compilable again after signature change in backend.
2012-04-27 Felix Wolfsteller Cosmetics, doc.
2012-04-27 Felix Wolfsteller Added accidentally ommitted File in last commit.
2012-04-27 Felix Wolfsteller Added DataType for lines that also stores width, use it. Added HasLabel interface for some series.
2012-04-26 Raimund Renkert Initial transition configuration and artifact/state stubs for fixation
2012-04-26 Sascha L. Teichmann Add method to calculate length of water lines.
2012-04-26 Felix Wolfsteller Most of issue454: Label waterlines.
2012-04-26 Felix Wolfsteller Let theme define whether or not to display a (yet static) label for line).
2012-04-26 Felix Wolfsteller Cosmetics, doc.
2012-04-25 Sascha L. Teichmann Checked in out dated version of outlier test.
2012-04-25 Sascha L. Teichmann Added simple Grubb's outlier test.
2012-04-25 Felix Wolfsteller Stub for labeling dataseries in EnhancedLineAndShapeRenerer.
2012-04-25 Felix Wolfsteller Added accidentally ommitted ChangeLog entry for last commit.
2012-04-25 Felix Wolfsteller Cosmetics, added doc, TODO and OPTIMIZE to Enhanced*Renderer.
2012-04-25 Sascha L. Teichmann Make file upload cross platform.
2012-04-25 Sascha L. Teichmann Make it compilable again.
2012-04-25 Raimund Renkert Issue 657.
2012-04-19 Raimund Renkert Issue 560.
2012-04-18 Raimund Renkert Issue 560.
2012-04-18 Sascha L. Teichmann Removed superfluous imports.
2012-04-18 Raimund Renkert Styles are now available for manual points in historical discharge charts.
2012-04-18 Raimund Renkert Fixed duplicated legend entry for manual points.
2012-04-18 Raimund Renkert Issue 494.
2012-04-17 Sascha L. Teichmann Improve XSL transformation for fixings overview output.
2012-04-13 Raimund Renkert Issue 528, 637.
2012-04-13 Raimund Renkert Small fixes in pdf templates for reference curve export.
2012-04-12 Raimund Renkert Issue 528, 637.
2012-04-12 Raimund Renkert Issue 528, 637.
2012-04-11 Sascha L. Teichmann check-i18n-properties.py: Checked in unsaved version.
2012-04-11 Raimund Renkert Issue 656.
2012-04-11 Sascha L. Teichmann Added consistency checker for i18n properties files.
2012-04-11 Sascha L. Teichmann Generate error message when more than one Q is found for given Q in "W auf freier Strecke".
2012-04-11 Raimund Renkert Fixed step calculation in W/Q range input mode.
2012-04-06 Sascha L. Teichmann Fixed the fixings columns caching problem.
2012-04-05 Sascha L. Teichmann FixingsKMChartService.java: Small fixes.
2012-04-05 Sascha L. Teichmann FixingsKMChartService: Generate chart and deliver the image as the response of the service.
2012-04-05 Sascha L. Teichmann Loaded columns of fixings from database and store them into the cache.
2012-04-05 Raimund Renkert Fix for 'W free' validation and theme names.
2012-04-05 Raimund Renkert Issue 499.
2012-04-05 Ingo Weinzierl Defined a style for WSPLGEN layers which are now modifiable.
2012-04-04 Sascha L. Teichmann More code for the fixings km chart service.
2012-04-04 Sascha L. Teichmann Added service to generate a chart of fixings for given river and km applied
2012-04-04 Sascha L. Teichmann Fixed NPE bug in filter builder for fixings overview.
2012-04-04 Sascha L. Teichmann Squashed performance bug introduced in rev4070. Now CSV export is about 245 times faster.
2012-04-03 Sascha L. Teichmann Join nodes in Q tree if they span a continuous interval and have same Qs.
2012-04-03 Sascha L. Teichmann Added cacheable model for fixing column.
2012-04-03 Sascha L. Teichmann Little optimization when fetching q ranges for single columns of wsts.
2012-04-03 Sascha L. Teichmann Refactored the code of the fixings filter building to be useful in more cases.
2012-04-03 Sascha L. Teichmann Abjusted services to new hierachy.
2012-03-30 Ingo Weinzierl #460 Fixed duplicated Outputs in DESCRIBE documents.
2012-03-29 Ingo Weinzierl #366 Display correct descriptions in legend panel of charts.
2012-03-28 Ingo Weinzierl #362 Adjusted text color of w and q main values for computed discharge curves.
2012-03-23 Sascha L. Teichmann Applied patch from flys/issue639
2012-03-22 Felix Wolfsteller Add textorientation to Hyk themes.
2012-03-22 Felix Wolfsteller Fix flys/issue491 (areas over axis stop at zero).
2012-03-20 Raimund Renkert Issue 506.
2012-03-20 Ingo Weinzierl #544 Added a service that allows querying gauge information.
2012-03-20 Ingo Weinzierl Improved selecting discharge tables for historical discharge calculation.
2012-03-20 Ingo Weinzierl #146 Removed discharge curve at gauge from WINFO transition model.
2012-03-20 Ingo Weinzierl #252 Added numeric value of a named main value into the WST export.
2012-03-16 Ingo Weinzierl Fixed broken Floodmaps in datacage for floodmap output.
2012-03-16 Raimund Renkert Remove unnecessary outputs from attributes instead of copying outs to
2012-03-16 Ingo Weinzierl Tagged trunk of module 'flys-artifacts' as 'pre2.7-2012-03-16'.
2012-03-16 Ingo Weinzierl Removed useless imports.
2012-03-16 Ingo Weinzierl #523 Improved the look of minimum and maximum shapes in chart series.
2012-03-15 Ingo Weinzierl #522 Modified axes creation: label and tick label fonts will now always be the same.
2012-03-15 Raimund Renkert Changed wrong issue number.
2012-03-15 Raimund Renkert Issue 459.
2012-03-15 Ingo Weinzierl Removed references to Range and replaced those with references to Bounds in ChartGenerators.
2012-03-14 Ingo Weinzierl Enabeld axes label font sizes for timeseries charts.
2012-03-14 Raimund Renkert Issue 640.
2012-03-09 Felix Wolfsteller Stubby legend aggregation.
2012-03-08 Ingo Weinzierl Fixed broken XML syntax in themes.xml
2012-03-08 Ingo Weinzierl Modified the datacage structure of 'floodmaps'.
2012-03-08 Ingo Weinzierl Added a new Artifact for loading existing 'floodmaps' via datacage.
2012-03-08 Ingo Weinzierl Improved the datacage configuration to serve floodmaps.
2012-03-05 Ingo Weinzierl #566 Improved german translation.
2012-03-05 Felix Wolfsteller Partial fix flys/issue 528 (csv of reference curves. pdf missing).
2012-03-05 Felix Wolfsteller Fixed column order.
2012-03-05 Felix Wolfsteller Stub to export the 'W (cm)' column of reference curves conditionally on Gauge presence.
2012-03-05 Felix Wolfsteller New utility to handle more dynamically long csv exported rows.
2012-03-01 Felix Wolfsteller Fix flys/issue501 (manual points have two legend entries).
2012-03-01 Felix Wolfsteller Fix flys/issue636 (cross-section: name of waterlevel facets).
2012-03-01 Felix Wolfsteller Partial fix flys/issue615, adjusted datacage conf.
2012-03-01 Felix Wolfsteller Partial Dontcrash on flys/issue647 (NaNs from WstValueTable interpolation).
2012-03-01 Felix Wolfsteller Cosmetics, docs.
2012-02-27 Sascha L. Teichmann Added functions to be used for fitting in the "Fixierungsanalyse" and "Extremwertermittlung".
2012-02-27 Felix Wolfsteller Added ommitted i18n.
2012-02-27 Felix Wolfsteller fix flys/issue638 (area between certain datatypes).
2012-02-27 Felix Wolfsteller Partial fix flys/issue637 (wording).
2012-02-21 Sascha L. Teichmann FixingsOverview: Added XSL transformation which directly converts the output of the fixings overview service into an HTML representation.
2012-02-20 Sascha L. Teichmann FixingsOverviewService: Made the filter mechanisms available via the incoming XML document.
2012-02-20 Sascha L. Teichmann FixingsOverview: Added a filter mechanism for generating output.
2012-02-20 Sascha L. Teichmann FixingsOverview: Construct the Q sectors once.
2012-02-19 Sascha L. Teichmann Service to generate the data needed to build the "Fixerungen pro Fluss Uebersicht"
2012-02-17 Sascha L. Teichmann WstValueTable: Forget to check in the range method of getMinMaxQ().
2012-02-17 Sascha L. Teichmann WstValueTable: Symmetrical to getMinMaxW() add two methods to find min/max Q for a given
2012-02-17 Sascha L. Teichmann WstValueTable: Added method to find the w extent for a given km range.
2012-02-17 Sascha L. Teichmann WstValueTable: Added method to find the w extent for a given km.
2012-02-17 Raimund Renkert Renamed state data fields for W/Q input.
2012-02-17 Raimund Renkert Write the gauge description instead of the Q value to CSV file.
2012-02-17 Ingo Weinzierl Apply legend specific settings (show/hide) in timeseries charts.
2012-02-17 Ingo Weinzierl Some refactoring in chart creation; timeseries charts are now able to apply plot specific settings as well.
2012-02-16 Raimund Renkert Refactored the wq data fields.
2012-02-16 Sascha L. Teichmann Fixed W->Q conversion for "W fuer ungleichwertige Abflusslaengsschnitte."
2012-02-16 Ingo Weinzierl #509 Set the lower bounds of duration curves Q axis to 0 if no zoom has taken place.
2012-02-16 Felix Wolfsteller Removed not needed function from interface.
2012-05-29 Ingo Weinzierl Merged revisions 4541,4544 via svnmerge from
2012-05-28 Ingo Weinzierl Merged revisions 4541 via svnmerge from
2012-05-27 Ingo Weinzierl Merged revisions 4533 via svnmerge from
2012-05-24 Raimund Renkert Issue 671.
2012-05-24 Raimund Renkert Resized the km spinner for cross section themes.
2012-05-24 Raimund Renkert Set the facet and the index to valid values.
2012-05-24 Felix Wolfsteller Cosmetics.
2012-05-23 Raimund Renkert Added fixanalysis artifact.
2012-05-23 Raimund Renkert Added a style chooser to the style editor to provide predefined styles and
2012-05-22 Sascha L. Teichmann Removed superfluous imports.
2012-05-22 Sascha L. Teichmann FixPeriodPanel: Make the names of state parameters configurable by constructor.
2012-05-21 Raimund Renkert New methods in UI providers for fixings states and minor protocol changes.
2012-05-21 Raimund Renkert Changed data field 'name' to 'description' in fix overview.
2012-05-21 Raimund Renkert Added an int data item used in int array data and added getter that returns
2012-05-18 Ingo Weinzierl Added i18n csv export and chart title for MINFO bed height calculation.
2012-05-16 Ingo Weinzierl Added missing StringOptionsData class from last commit.
2012-05-16 Ingo Weinzierl Added new Data type StringOptionsData; allow this Data type for ParameterMatrixPanel.
2012-05-16 Sascha L. Teichmann Fixing overview: Render the Q class to the title of the sectors of the events.
2012-05-16 Sascha L. Teichmann Fixing overview XSLT: Make the description of the event the title of the date column cells.
2012-05-16 Ingo Weinzierl Added i18n strings for flow velocity chart output.
2012-05-16 Ingo Weinzierl Implemented ParameterMatrixPanel.createOld() and added a real 'description' to Data instances in DataFactory.
2012-05-16 Ingo Weinzierl Added i18n titles for flow velocity export.
2012-05-15 Raimund Renkert Changed some data types in states and filter and added new preprocessing state
2012-05-15 Ingo Weinzierl Implemented ParameterMatrixPanel.getData().
2012-05-15 Ingo Weinzierl Revert last commit which contains configuration modifications.
2012-05-15 Ingo Weinzierl Implemented ParameterMatrixPanel.getData().
2012-05-14 Felix Wolfsteller Fix fixation analysis module select.
2012-05-14 Ingo Weinzierl Added a new UIProvider that renders a matrix of checkboxes for user input.
2012-05-14 Ingo Weinzierl Added a MINFOArtifact and improved the DistancePanel.
2012-05-14 Sascha L. Teichmann Call MapFish Printer via servlet to evade viral GPLv3.
2012-05-13 Felix Wolfsteller i18n for datacage/computed discharge curves.
2012-05-11 Raimund Renkert Added filter object class and scrollable chart to helper panel.
2012-05-11 Felix Wolfsteller Fixed a i18n string.
2012-05-10 Sascha L. Teichmann Fixed problem with selecting the wrong map scale for printing.
2012-05-09 Felix Wolfsteller More input checks with kmspinner.
2012-05-09 Felix Wolfsteller Fix issue652: spinner input.
2012-05-09 Felix Wolfsteller Added i18n strings for new showmiddleheight theme property.
2012-05-09 Sascha L. Teichmann map print: Simplified config.
2012-05-09 Sascha L. Teichmann map print: add legend
2012-05-09 Sascha L. Teichmann Added zoom listener a adjust the print link bbox.
2012-05-09 Sascha L. Teichmann map print: generate valid url to access service.
2012-05-08 Sascha L. Teichmann Added link to print map.
2012-05-07 Sascha L. Teichmann Printing: extract layer order and visibility from collections describe.
2012-05-07 Raimund Renkert First part of the UI for fixing analysis parameter.
2012-05-04 Sascha L. Teichmann Generate map print spec dynamically from artifact
2012-05-04 Sascha L. Teichmann Added GET parameters to map printer
2012-05-04 Sascha L. Teichmann Call MapPrinter directly and not via the MapFish Print servlet.
2012-05-03 Felix Wolfsteller Added new i18n strings for theme properties of waterlevel labels in cs.
2012-05-03 Ingo Weinzierl Create a link to an online help page and put it in front of the input panels.
2012-05-02 Felix Wolfsteller Define order for linelabel theme properties.
2012-05-02 Felix Wolfsteller Added i18 for linelabel theme property strings.
2012-04-27 Sascha L. Teichmann Removed superfluous imports.
2012-04-26 Sascha L. Teichmann Added dependency to MapFish Print
2012-04-26 Felix Wolfsteller Added i18n for showlinelabel theme prop.
2012-04-25 Raimund Renkert Issue 657.
2012-04-20 Sascha L. Teichmann Added the XSL transformation to generate the fixings overview.
2012-04-20 Sascha L. Teichmann Fixed incorrect servlet mapping.
2012-04-20 Felix Wolfsteller Fix imports.
2012-04-20 Felix Wolfsteller Improve km-Spinner behaviour, allow text input (alpha).
2012-04-19 Sascha L. Teichmann Added stub for fixings overview service.
2012-04-19 Sascha L. Teichmann Added new proxy servlet to bridge the fixing km chart requests to the artefact server.
2012-04-18 Raimund Renkert Adjusted the GetFeatureInfoWindow layout.
2012-04-18 Sascha L. Teichmann Removed superflous imports.
2012-04-18 Felix Wolfsteller Replace spinnerItem by custom implementation to switch km in cross sections, but regress.
2012-04-18 Felix Wolfsteller Small fix for retrieving closest km.
2012-04-18 Raimund Renkert Open the ManualDatePointsEditor from context menu if chart is a historical
2012-04-17 Felix Wolfsteller Cosmetics.
2012-04-17 Felix Wolfsteller Cosmetics.
2012-04-17 Felix Wolfsteller Fix issue462 (manualpointseditor npe when doubleclicking).
2012-04-17 Raimund Renkert Issue 494.
2012-04-13 Raimund Renkert Issue 424.
2012-04-12 Raimund Renkert Issue 502.
2012-04-11 Raimund Renkert Added missing i18n strings and removed duplicates.
2012-04-11 Raimund Renkert Issue 492.
2012-04-11 Raimund Renkert Fixed range input for 'W free'.
2012-04-05 Raimund Renkert Issue 499.
2012-04-04 Ingo Weinzierl Prepared the style editor for WSPLGEN themes.
2012-04-04 Ingo Weinzierl Replaced FLYS specific icon set.
2012-04-02 Ingo Weinzierl #556 Made GetFeatureInfoWindow modal.
2012-03-30 Ingo Weinzierl Take care on nullpointers in the MapToolbar because the info button is not always enabled.
2012-03-20 Raimund Renkert Issue 506.
2012-03-20 Ingo Weinzierl Added the WQ tables to the helper panel of the WQSimpleArrayPanel.
2012-03-20 Ingo Weinzierl Added a new RPC service to fetch gauge information.
2012-03-20 Ingo Weinzierl Added new model classes for gauges.
2012-03-20 Felix Wolfsteller Disable spinnerbox if theme is disabled.
2012-03-20 Felix Wolfsteller Make synchron navigation of CrossSections a per-theme option, not global one.
2012-03-20 Felix Wolfsteller i18n and moved reference selectbox for cross section master to top.
2012-03-20 Felix Wolfsteller Fix flys/issue462
2012-03-20 Ingo Weinzierl #204 Modified i18n strings in WQD table.
2012-03-19 Ingo Weinzierl Configured more external WMS services for floodmaps.
2012-03-16 Raimund Renkert Issue 493.
2012-03-16 Ingo Weinzierl Tagged module 'flys-client' as 'pre2.7-2012-03-16'.
2012-03-15 Raimund Renkert Issue 630.
2012-03-14 Raimund Renkert Issue 508.
2012-03-13 Raimund Renkert Issue 514.
2012-03-13 Raimund Renkert Issue 616.
2012-03-08 Raimund Renkert Issue 563.
2012-03-08 Raimund Renkert Issue 553.
2012-03-08 Ingo Weinzierl Added i18n strings used in the floodmaps section of the datacage.
2012-03-05 Ingo Weinzierl Deactivate measure control when activating GetFeatureInfo control and reverse.
2012-03-05 Ingo Weinzierl Made GetFeatureInfo request available for maps with one layer only.
2012-03-05 Ingo Weinzierl Deactivate GetFeatureInfo button if another toggle button is pressed.
2012-03-05 Ingo Weinzierl Removed the scrollbar placeholder of the project list.
2012-03-05 Ingo Weinzierl Removed the scrollbar gap in the theme panels.
2012-03-05 Ingo Weinzierl Added I18N string for digital elevation models.
2012-03-02 Felix Wolfsteller Partial fix flys/issue624 (removing cross section).
2012-03-02 Felix Wolfsteller Fix issue621 (areas against removed themes).
2012-03-01 Ingo Weinzierl #557 Fixed wrong i18n string for tooltip in map controls.
2012-03-01 Ingo Weinzierl #558 Reload GetLegendGraphics images when changing the style of a map layer.
2012-03-01 Ingo Weinzierl #555 Close existing GetFeatureInfoWindows before creating new ones.
2012-03-01 Ingo Weinzierl Query GetFeatureInfo for active layers only.
2012-03-01 Ingo Weinzierl Removed the Collection's UUID from CollectionView's title.
2012-03-01 Raimund Renkert Issue 572.
2012-03-01 Ingo Weinzierl Display better message for empty datacages.
2012-03-01 Raimund Renkert Fixed Issue 498.
2012-03-01 Felix Wolfsteller fix flys/issue613 . cap max point size.
2012-02-17 Raimund Renkert Renamed state data fields for W/Q input.
2012-02-17 Ingo Weinzierl #459 Take the current zoom into account for chart exports.
2012-02-17 Ingo Weinzierl Removed server url from chart image link.
2012-02-17 Ingo Weinzierl Print debug messages for zoom values in ChartOutputServiceIMpl.
2012-02-16 Raimund Renkert Refactored the wq input data fields.
2012-02-16 Ingo Weinzierl Modified german translation of qps in floodmap datacage.
2012-09-28 Thomas Arendsen Hein merged flys-backend/2.6.1 2.6.1
2012-02-14 Sascha L. Teichmann flys/issue499: Sort the values of the discharge table by Q.
2012-09-28 Thomas Arendsen Hein merged flys-artifacts/2.6.1
2012-02-17 Ingo Weinzierl Picked rev 4070,4074,4076,4080 from trunk.
2012-02-17 Ingo Weinzierl Picked rev 4058,4063,4065,4068,4069 from trunk.
2012-02-16 Ingo Weinzierl Picked rev4061 from trunk.
2012-02-16 Felix Wolfsteller Fix flys/issue150 ('water increasing').
2012-02-16 Ingo Weinzierl Fixed broken HYKs in crosssection charts for river Mosel.
2012-02-14 Sascha L. Teichmann Another partial fix for flys/issue499: Do the W to Q conversions
2012-02-14 Felix Wolfsteller Added accidentally ommitted ChangeLog entry.
2012-02-14 Felix Wolfsteller Partial Fix flys/issue500: text-orientation for texts.
2012-02-13 Sascha L. Teichmann Partial fix for flys/issue499
2012-02-13 Sascha L. Teichmann Make it compileable again
2012-02-13 Felix Wolfsteller Partial Fix flys/issue500: Text-background for manual points.
2012-02-13 Felix Wolfsteller Partial fix flys/issue500 (text bg of some annotations).
2012-02-13 Felix Wolfsteller Fix flys/issue490 (text for manual points).
2012-02-10 Sascha L. Teichmann 'Reduzierte Bezugslinien' make the code more self explaining.
2012-02-10 Ingo Weinzierl Bugfix: Take care on empty ArtifactAndFacet objects in doAnnotations().
2012-02-10 Sascha L. Teichmann 'Bezugslinien': normalized reference curve is now derived from reference curve.
2012-02-10 Sascha L. Teichmann 'Bezugslinien': Added axis labels matching the displayed data.
2012-02-10 Ingo Weinzierl Fixed broken PDF export for historical discharge curves.
2012-02-10 Felix Wolfsteller Towards fixe of flys/issue495.
2012-02-10 Sascha L. Teichmann 'Bezugslinienverfahren': Fix the index bug.
2012-02-10 Sascha L. Teichmann 'Bezugslinienverfahren': Improve the error messages even more.
2012-02-10 Sascha L. Teichmann 'Bezugslinienverfahren': Forget to put new created WWAxisType onto blackboard.
2012-02-10 Felix Wolfsteller Adjust linear function offset.
2012-02-10 Ingo Weinzierl Enabled zooming for timeseries charts.
2012-02-10 Ingo Weinzierl Improved the interface and implementations of Bounds.
2012-02-10 Ingo Weinzierl New abstract methods in ChartGenerator and moved a method from ChartGenerator to XYChartGenerator.
2012-02-10 Ingo Weinzierl Small improvements in model classes for Bounds.
2012-02-10 Sascha L. Teichmann Give more precise message when an error occurs in W~W relation.
2012-02-10 Ingo Weinzierl Some API changes in ChartGenerator and XYChartGenerator for fetching user specified zoom values.
2012-02-10 Ingo Weinzierl Added chart helper function to determine the min and max bounds (x and y) for TimeSeriesCollections.
2012-02-10 Ingo Weinzierl Removed useless imports.
2012-02-17 Ingo Weinzierl Picked rev4066,4075 from trunk.
2012-02-17 Ingo Weinzierl Picked rev 4059,4071,4072,4073 from trunk.
2012-02-16 Ingo Weinzierl Tagged trunk of module flys-client as 2.6.1
2012-02-14 Sascha L. Teichmann flys/issue499: Deactivate validation for 'W am Pegel'
2012-02-13 Sascha L. Teichmann Another partial fix/workaround for flys/issue499.
2012-02-13 Sascha L. Teichmann Client side fix for flys/issue499. There is an server issue, too.
2012-09-28 Thomas Arendsen Hein merged flys-backend/2.6 2.6
2012-02-09 Ingo Weinzierl Added a method Gauge.fetchMasterDischargeTable() to retrieve the discharge table with kind = 0.
2012-02-06 Felix Wolfsteller River: (fix) Renamed function which is not a getter.
2012-02-03 Sascha L. Teichmann Added a method to build a map from gauge stations to the datums of the gauges.
2012-01-19 Sascha L. Teichmann Added meachnism to backend to fetch all annotation related data in one go.
2012-01-18 Ingo Weinzierl Added a function Gauge.getGaugeByOfficialNumber() that returns a Gauge based on its official number.
2012-01-17 Sascha L. Teichmann Create fast cross section lines in the backend now.
2012-01-16 Sascha L. Teichmann CrossSection: Added method to extract the lines of a given km range.
2012-01-16 Sascha L. Teichmann CrossSectionLine: Simplified creation of Point2Ds.
2012-01-10 Sascha L. Teichmann Make parsing of official numbers out of STA files being enabled with new system property.
2012-01-05 Sascha L. Teichmann backend: Fixed spatial table hws.
2012-01-05 Ingo Weinzierl Modified the signature of RiverAxis.getRiverAxis() which now returns a list of RiverAxis objects instead of a single instance.
2012-01-03 Ingo Weinzierl Added a new method Wst.determineMinMaxQFree() to determine the min/max Qs at a given kilometer.
2012-01-02 Sascha L. Teichmann Removed "NOT NULL" constraint from gauges.range_id because there are gauges which dont have a Gueltigkeitsbereich.
2011-12-28 Ingo Weinzierl Added a new method Wst.determineMinMaxQ(double,double).
2011-12-19 Sascha L. Teichmann Added support for official gauge numbers.
2011-11-30 Bjoern Schilberg doc/schema/oracle-spatial.sql: Adjust extent of germany to EPSG:31467 (GK3) coordinates.
2011-11-30 Bjoern Schilberg doc/schema/oracle-spatial.sql: Adjusted extent to the extent of germany and srs to 31467 in USER_SDO_GEOM_METADATA.
2011-11-29 Bjoern Schilberg Fixed oracle_create_user.sql script: Fixed notation of the table in the alter statement.
2011-11-18 Sascha L. Teichmann Fixed flys/issue415: Increased precision of a and b in ranges.
2011-11-10 Ingo Weinzierl Added functions that return lists of Buildings/Fixpoints to according classes.
2011-11-10 Ingo Weinzierl Adapted 'lines' relation and made lines queryable for a given river.
2011-11-09 Ingo Weinzierl Added and registered a model Catchment for 'catchment' relation.
2011-11-09 Ingo Weinzierl Added model for 'hws' relation and synced postgis with oracle spatial schema.
2011-11-09 Ingo Weinzierl Added some functions that return information about the db connection used by the current database session.
2011-11-09 Ingo Weinzierl Made flys-backend compatible with oracle spatial.
2011-11-01 Ingo Weinzierl Added model class for relation 'river_axes_km'.
2011-10-25 Bjoern Schilberg Added explizit TABLESPACE definition for the user.
2011-10-25 Bjoern Schilberg Adjusted oracle_create_user.sql script. Added USER SQL snippet to change tablespace to users.
2011-10-24 Sascha L. Teichmann Added date guesser for WST columns.
2011-10-24 Bjoern Schilberg Adjusted geometry type for floodplain and hws in AddGeometryColumn.
2011-10-19 Bjoern Schilberg Added missing views (wst_value_table,wst_w_values,wst_q_values).
2011-10-18 Bjoern Schilberg Removed all CREATE OR REPLACE TRIGGER statements.
2011-10-17 Bjoern Schilberg Adjusted NUMBER format for units, positions and cross_section_points tables.
2011-10-11 Bjoern Schilberg Fixed errors.
2011-10-10 Bjoern Schilberg Adjust oracle schema [I382]
2011-10-10 Felix Wolfsteller Removed obsolete imports.
2011-10-05 Sascha L. Teichmann units table: Added update statements for existing databases
2011-10-05 Ingo Weinzierl Added a schema dump shell script.
2011-10-04 Ingo Weinzierl Removed the Unit from Wsts - added a WstUnit column to rivers.
2011-10-04 Ingo Weinzierl Added db table, model class and importer stuff for units.
2011-10-04 Ingo Weinzierl Bugfix: #333 Improved determination of reference gauge based on start km.
2011-09-28 Felix Wolfsteller Extracted StringUtil.wWrap method from WaterlevelSelectState .
2011-09-28 Felix Wolfsteller Added 'unbracket' StringUtil method (extracted from WaterlevelSelectState).
2011-09-27 Sascha L. Teichmann CrossSectionLine: Moved some logic from cross section demo app to this model.
2011-09-26 Ingo Weinzierl Added function to retrieve nearest CrossSectionTrack to a given kilometer.
2011-09-23 Bjoern Schilberg Added missing schemas.
2011-09-23 Bjoern Schilberg Harmonized oracle and postgresql spatial schema.
2011-09-22 Bjoern Schilberg Harmonized Extent for Saar and Mosel. Some cleanups.
2011-09-22 Ingo Weinzierl Added code and a system property 'flys.backend.enablejmx=true' to enable JMX support for hibernate.
2011-09-21 Bjoern Schilberg Added right to create views.
2011-09-20 Bjoern Schilberg Generalized oracle spatial schema.
2011-09-19 Ingo Weinzierl Tagged RELEASE 2.5 of flys-backend.
2012-09-28 Thomas Arendsen Hein merged flys-artifacts/2.6
2012-02-10 Ingo Weinzierl Picked rev4038 from trunk to stop Annotations break chart rendering.
2012-02-10 Ingo Weinzierl Picked rev4034 from trunk.
2012-02-10 Ingo Weinzierl Picked changes r4015:4026 from trunk.
2012-02-10 Felix Wolfsteller Add W(cm) column to csv export of reference curves.
2012-02-09 Ingo Weinzierl Added standalone demo application that prints all layers of a WMS to file.
2012-02-09 Ingo Weinzierl Added new model classes that should be used for axes range adaption later.
2012-02-09 Sascha L. Teichmann 'Bezugslinienverfahren': Generate valid i18n names for datasets.
2012-02-09 Ingo Weinzierl #485 Fixed broken renaming of chart themes.
2012-02-09 Felix Wolfsteller Changed dashes in entitie names to underscores.
2012-02-09 Sascha L. Teichmann Fixed problems with incluing zeros in reference curves.
2012-02-09 Felix Wolfsteller Allow manual points in new charts.
2012-02-09 Ingo Weinzierl Enabled styling in timeseries charts.
2012-02-09 Sascha L. Teichmann ChangeLog: forget to commit
2012-02-09 Felix Wolfsteller Added area facet to compatibility list of new charts longitudinal section output.
2012-02-09 Felix Wolfsteller Avoid that annotations like the ones used for hyks prevent manual point text annotation rendering.
2012-02-09 Ingo Weinzierl Added themes for discharge curves and difference curves in historical discharge curve charts.
2012-02-09 Sascha L. Teichmann Be more conservative about arrays and indices in "Bezugslinienverfahren".
2012-02-09 Ingo Weinzierl Some bugfixes and improvements in the calculation of historical discharge curves.
2012-02-09 Felix Wolfsteller Fix call to StringUtils.join .
2012-02-09 Felix Wolfsteller Added i18n string for waterlevels.
2012-02-09 Felix Wolfsteller Format multiple double values with a locale.
2012-02-09 Ingo Weinzierl Compute differences between discharge table values and reference discharge table values in historical discharge curve calculation.
2012-02-09 Raimund Renkert Added PDF export to reference curve calculation.
2012-02-09 Sascha L. Teichmann Prevent duplicates in end kms for reference curve calculation.
2012-02-09 Felix Wolfsteller Renamed data item names to allow translations.
2012-02-08 Felix Wolfsteller Better description for reference curve facets (seen in client).
2012-02-08 Felix Wolfsteller Prepare new data input for reference curves 'Ziel' locations.
2012-02-08 Sascha L. Teichmann Error report: Format kms in error reports at least with one digit after the decimal separator.
2012-02-08 Ingo Weinzierl #483 Display error message in calculation report for empty historical discharge calculations.
2012-02-08 Sascha L. Teichmann Fix flys/issue468 (Fehler beim Projekt-Duplizieren)
2012-02-08 Felix Wolfsteller Handle manual points in discharge curve generator.
2012-02-08 Felix Wolfsteller Repair area over cross sections.
2012-02-08 Ingo Weinzierl Put line and text annotations placed at x and y axes into foreground.
2012-02-08 Felix Wolfsteller fix flys/issue474 (manual points in reference curves).
2012-02-08 Felix Wolfsteller Partial fix issue474, i18n.
2012-02-08 Felix Wolfsteller Register style for reference_curve_normalized.
2012-02-08 Ingo Weinzierl Be more merciful for building the URL for the user-wms.
2012-02-08 Felix Wolfsteller Fix flys/issue472. (discharge_curve manualpoints)
2012-02-08 Sascha L. Teichmann Fix flys/issue484
2012-02-08 Felix Wolfsteller Map themes to manualpoint themes.
2012-02-08 Felix Wolfsteller Configuration for manualpoints for cross sections.
2012-02-08 Felix Wolfsteller Commented styling option for show area until area calculation does work.
2012-02-08 Sascha L. Teichmann Calculation error report: i18n the km of the error report.
2012-02-07 Ingo Weinzierl Small bugfix for fetching river annotations.
2012-02-07 Sascha L. Teichmann Added missing config of chart info generator
2012-02-07 Ingo Weinzierl Fixed wrong name of chartinfo generator for historical discharge curves.
2012-02-07 Raimund Renkert Added PDF export for historical discharge curve calculations.
2012-02-07 Felix Wolfsteller Improved CSV export of reference curves, include Qs.
2012-02-07 Felix Wolfsteller Refactored Formatter access to ease reuse.
2012-02-07 Felix Wolfsteller Let reference curve calculation result in wwqq.
2012-02-07 Felix Wolfsteller Log error as warning.
2012-02-06 Sascha L. Teichmann "Bezugslinienverfahren": Do normalisation of reference curves.
2012-02-06 Sascha L. Teichmann "Bezugslinienverfahren": Added missing chart info generator.
2012-02-06 Felix Wolfsteller Fix i18n
2012-02-06 Sascha L. Teichmann "Bezugslinienverfahren": Fetch axis types from call context.
2012-02-06 Sascha L. Teichmann Added generator for "Reduzierte Bezugslinie".
2012-02-06 Raimund Renkert Added service for discharge infos at a specific gauge.
2012-02-06 Sascha L. Teichmann Added config for "reduzierte Bezugslinie".
2012-02-06 Sascha L. Teichmann Added error to winfo.xml report.
2012-02-06 Ingo Weinzierl Set proper bounds for date axes in the chart info document; tell the transformation matrix which type it is (date/number).
2012-02-06 Felix Wolfsteller Extend reference curve export to include km location as string.
2012-02-06 Sascha L. Teichmann "Bezugslinienverfahren": Store Qs of calculation, too.
2012-02-06 Felix Wolfsteller Win fight against svn, added further i18n and slightly more data in reference-curve/csv export.
2012-02-06 Felix Wolfsteller Added more i18n stubs and slightly more data to csv export of reference curves.
2012-02-06 Felix Wolfsteller Added a second Y axis for ReferenceCurveGenerator.q
2012-02-06 Sascha L. Teichmann Return the Qs from the "Bezugslinienverfahren, too."
2012-02-06 Felix Wolfsteller Added a second Y axis for ReferenceCurveGenerator.
2012-02-06 Felix Wolfsteller Added accidentally ommitted ChangeLog.
2012-02-06 Felix Wolfsteller Primitive, incomplete CSV export for reference curves.
2012-02-06 Felix Wolfsteller Minor i18n for reference curve chart added.
2012-02-06 Ingo Weinzierl Added missing HistoricalDischargeCurveInfoGenerator class.
2012-02-06 Ingo Weinzierl Registered an Info generator for historical discharge curves; made some adaptions in XYChartGenerator, ChartGenerator and TimeseriesChartGenerator.
2012-02-06 Felix Wolfsteller Cosmetics.
2012-02-06 Felix Wolfsteller Add a not-yet-looked-at CSV facet for Reference Curve.
2012-02-06 Ingo Weinzierl Added a CSV export for historical discharge curves.
2012-02-06 Felix Wolfsteller Adjusted to name change in River class (hibernate fix).
2012-02-03 Sascha L. Teichmann First steps to serve the data in cm if we are are gauges only.
2012-02-03 Ingo Weinzierl W/Q input values in historical discharge curves may now by from type double.
2012-02-03 Sascha L. Teichmann Removed superfluous imports.
2012-02-03 Sascha L. Teichmann Dont sort the data series in reference curve.
2012-02-03 Felix Wolfsteller Removed obsolete ReferenceCurveInputState.
2012-02-03 Felix Wolfsteller Improved reference curve.
2012-02-03 Ingo Weinzierl Bugfix: create a report facet for historical discharge curves even if no data has been computed.
2012-02-03 Ingo Weinzierl Create title, subtitle and axes labels for charts from type historical discharge curve.
2012-02-03 Felix Wolfsteller Fix.
2012-02-03 Felix Wolfsteller Added i18n.
2012-02-03 Felix Wolfsteller Doc added and fix getAxisWalker-issue.
2012-02-03 Sascha L. Teichmann Use the ApplyFunctionIterator in reference curve generation.
2012-02-03 Ingo Weinzierl Added an error report for historical discharge curves.
2012-02-03 Ingo Weinzierl Improved chart creation for historical discharge curves.
2012-02-03 Ingo Weinzierl Further refactoring of XYChartGenerator / ChartGenerator with the result, that timerange charts are now able to display lines.
2012-02-03 Ingo Weinzierl New helper functions in ChartHelper and improvements in EnhancedLineAndShapeRenderer.
2012-02-02 Ingo Weinzierl The HistoricalDischargeCurveGenerator now creates new AxisDataset objects and new TimeSeriesCollections for each Facet.
2012-02-02 Ingo Weinzierl Improved WQTimerange and HistoricalDischargeFacet.
2012-02-02 Ingo Weinzierl Some more refactoring in XYChartGenerator and ChartGenerator; implemented necessary stuff in TimeseriesChartGenerator and return new empty instances of timeseries charts.
2012-02-02 Ingo Weinzierl Added a ChartHelper class that currently contains a method to compute the xy ranges of an XYDataset.
2012-02-02 Ingo Weinzierl Refactoring: moved more base code from XYChartGenerator into its parent class ChartGenerator
2012-02-02 Felix Wolfsteller Cosmetics/care/refac.
2012-02-02 Ingo Weinzierl Refactoring: moved more base code from XYChartGenerator into its parent class ChartGenerator.
2012-02-02 Ingo Weinzierl Added a new ChartGenerator for timeseries charts and refactored some code in XYChartGenerator.
2012-02-02 Ingo Weinzierl Added demo standalone app for evaluating different timeseries charts.
2012-02-02 Raimund Renkert Issue 466.
2012-02-01 Ingo Weinzierl Improved the 'historical discharge' calculation: implemented findValueForW().
2012-02-01 Felix Wolfsteller Add some fake 'input' data for reference curve. plot references curves from input km to input km +2.
2012-02-01 Ingo Weinzierl Implemented the first step of Calculation6; create Facets for each calculation results.
2012-02-01 Ingo Weinzierl Added a new constructor to Timerange that takes Date objects for start and end.
2012-02-01 Sascha L. Teichmann W: Forget to create ws data in constructor.
2012-02-01 Felix Wolfsteller Did some modifications for debugging purposes, added output to reference-curve-state.
2012-02-01 Felix Wolfsteller Register ReferenceCurve-Generators.
2012-02-01 Felix Wolfsteller Cosmetics.
2012-02-01 Felix Wolfsteller Add more-or-less dummy Facet in ReferenceCurveState.
2012-02-01 Felix Wolfsteller Cosmetics.
2012-02-01 Felix Wolfsteller Added reference curve facet type.
2012-02-01 Ingo Weinzierl Fetch parameters for 'historical discharge curve' calculation; call Calculation6 with those information and check input parameters.
2012-02-01 Felix Wolfsteller Addes stub for ReferenceCurve*Generator
2012-02-01 Ingo Weinzierl Added new model classes which will be used during historical discharge curve calculation.
2012-02-01 Ingo Weinzierl Added new helper methods to FLYSUtils that extract int[] and double[] from string.
2012-02-01 Ingo Weinzierl Added new classes and stubs used to calculate data for historical discharge curve charts.
2012-02-01 Ingo Weinzierl Removed needless imports.
2012-02-01 Felix Wolfsteller Changed wording.
2012-02-01 Felix Wolfsteller Avoid running into an NPE, but add warning to ease forensic.
2012-01-31 Sascha L. Teichmann Fixed problems with unformatted numbers in error message.
2012-01-31 Ingo Weinzierl Override getLabelFor() in HistoricalDischargeState to return an I18N string for the selected evaluation mode.
2012-01-31 Ingo Weinzierl Modified some data types in the 'historical discharge curves' transitions.
2012-01-30 Felix Wolfsteller Fix wrong transition type towards w_diff.
2012-01-30 Ingo Weinzierl Display the name of the reference gauge in the static ui of 'historical discharge curves' calculation.
2012-01-30 Felix Wolfsteller Add manual point handling for many different chart types.
2012-01-30 Ingo Weinzierl Format the timerange (static ui) inserted in the 'historical discharge curves' calculation.
2012-01-30 Ingo Weinzierl Bugfix: use correct order of parameters to call DefaultStateData constructor.
2012-01-30 Ingo Weinzierl Fixed a bug in the winfo transitions.
2012-01-30 Ingo Weinzierl Added default values for min and max items prepared by MinMaxState.
2012-01-30 Sascha L. Teichmann "Bezugslinienverfahren": Add start and end km to WW to determine if kms are at gauges.
2012-01-30 Ingo Weinzierl Added transitions for 'historical discharge curves' calculation.
2012-01-30 Felix Wolfsteller Skip 'inactive' points in output generation.
2012-01-28 Sascha L. Teichmann "Bezugslinienverfahren": Replaced normalized curve generation with a better and needed solution.
2012-01-27 Sascha L. Teichmann "Bezugslinienverfahren": Implemented the on-the-flys shift to (0, 0).
2012-01-27 Sascha L. Teichmann "Bezugslinienverfahren": Added facet classes.
2012-01-27 Sascha L. Teichmann "Bezugslinenverfahren": Added stub loop for creating facets.
2012-01-27 Sascha L. Teichmann Call the "Bezugslinienverfahren" from the WINFOArtifact.
2012-01-27 Felix Wolfsteller Manual Point Theming improved.
2012-01-27 Sascha L. Teichmann 'Bezugslinienverfahren': Fixed stupid bug.
2012-01-27 Ingo Weinzierl Added states (work is not finished yet) for the 'historical discharge curve' calculation.
2012-01-27 Ingo Weinzierl Introduced an abstract MinMaxState and a concrete class IntRangeState to add min/max value pairs.
2012-01-27 Ingo Weinzierl Refactored some code in DefaultState to better override the base class.
2012-01-27 Ingo Weinzierl Removed useless import.
2012-01-27 Ingo Weinzierl Added strings used in the calculation 'historical discharge curves'.
2012-01-27 Sascha L. Teichmann Added calculation class for "Bezugslinienverfahren" to created by WINFOArtifact.
2012-01-27 Raimund Renkert Added i18n support to PDF report export.
2012-01-27 Felix Wolfsteller Only add one legend item for manual point themes.
2012-01-27 Felix Wolfsteller Render labels of manual points in a very primitive manner.
2012-01-27 Sascha L. Teichmann Refactored class hierachy to integrate model for W~W.
2012-01-27 Felix Wolfsteller i18n for ManualPointsFacets.
2012-01-27 Raimund Renkert Issue 138.
2012-01-27 Raimund Renkert Added method that return the differences for a w-differences calculation as
2012-01-27 Raimund Renkert Issue 138.
2012-01-26 Raimund Renkert Issue 138.
2012-01-26 Raimund Renkert Issue 138.
2012-01-26 Felix Wolfsteller Render manual points in longitudinal sections.
2012-01-26 Felix Wolfsteller Added acidentally ommitted ChangeLog entries.
2012-01-26 Felix Wolfsteller Cosmetics.
2012-01-26 Felix Wolfsteller New, basic infrastructure for user-provided data ('manual points').
2012-01-25 Sascha L. Teichmann Transition/States: Removed superfluous condition checks.
2012-01-25 Sascha L. Teichmann Added transition/state stubs for "Bezugslinienverfahren".
2012-01-25 Felix Wolfsteller Cosmetics.
2012-01-25 Sascha L. Teichmann visualize-transitions.xsl: Fixed output of conditions.
2012-01-25 Raimund Renkert Issue 461.
2012-01-24 Sascha L. Teichmann I18N for WINFO calculation result messages.
2012-01-23 Sascha L. Teichmann Handle the case in "W auf freier Strecke" where more than ne Q is related to a W.
2012-01-23 Sascha L. Teichmann Added code for the simple case of "Bezugslinienverfahren" ("W auf freier Strecke").
2012-01-23 Felix Wolfsteller Theoretically allow annotations on second y ais. Practically allow Q MainValues on Q Axis in Duration Curves.
2012-01-23 Felix Wolfsteller Fix compilation, use StickyAxisAnnotations in AnnotationFacet.
2012-01-23 Felix Wolfsteller Somewhat unified Annotation handling, use jfreechart-house-toolkit instead of custom StickyAxisAnnotation.
2012-01-23 Felix Wolfsteller Employ ChartRenderingInfo when creating svg/pdf exports.
2012-01-20 Raimund Renkert Added short subtitle for longitudinal section chart.
2012-01-20 Raimund Renkert Removed state validation.
2012-01-20 Felix Wolfsteller Added new Annotation class that prevents collisions (to replace StickyAxisAnnotation).
2012-01-20 Felix Wolfsteller Made StyledSeriesBuilder more robust.
2012-01-20 Felix Wolfsteller Respect rivers flow direction when looking for hyk-formations.
2012-01-20 Raimund Renkert Use waterlevel state and longitudinal section generator for longitudinal
2012-01-20 Raimund Renkert 'New chart' for cross sections.
2012-01-20 Felix Wolfsteller Add basic (text) styling for HYKS.
2012-01-20 Felix Wolfsteller Cleanups.
2012-01-20 Felix Wolfsteller Cosmetics.
2012-01-20 Felix Wolfsteller Added cache definition for hyks.
2012-01-20 Felix Wolfsteller Made HYKFactory.Zone Serializable (and thus cachable).
2012-01-20 Felix Wolfsteller Cosmetics.
2012-01-20 Felix Wolfsteller Added style for hyks.
2012-01-19 Sascha L. Teichmann DistanceInfoService now uses annotations from LocationProvider.
2012-01-19 Sascha L. Teichmann Use FastAnnotations for LocationProvider.
2012-01-19 Felix Wolfsteller Minor hyk-handling improvements.
2012-01-19 Felix Wolfsteller Cosmetics.
2012-01-19 Felix Wolfsteller Cosmetics.
2012-01-19 Felix Wolfsteller Recommend hyks if hit by cross section out.
2012-01-19 Felix Wolfsteller Somewhat improved hyk handling and rendering.
2012-01-19 Felix Wolfsteller Improved HYK/Zones- handling.
2012-01-19 Felix Wolfsteller Prepare improved hyk-handling.
2012-01-18 Raimund Renkert 'New Chart' for w-differences curve.
2012-01-18 Raimund Renkert 'New Chart' for discharge longitudinal section curve.
2012-01-18 Raimund Renkert 'New Chart' for duration curve.
2012-01-18 Felix Wolfsteller Added HYKFacet.
2012-01-18 Raimund Renkert 'New Chart' for computed discharge curve.
2012-01-18 Felix Wolfsteller Added stubby hyk infrastructure.
2012-01-18 Felix Wolfsteller Add 'hyk' facet type.
2012-01-18 Felix Wolfsteller Add hyk facet to compatibility list of winfo.xml
2012-01-18 Ingo Weinzierl Added convinience functions to FLYSArtifact and FLYSUtils.
2012-01-17 Sascha L. Teichmann Speed up the join of calculation results and the km annotations.
2012-01-17 Sascha L. Teichmann Use the fast cross section lines from backend now.
2012-01-17 Felix Wolfsteller Fix stateId/hash assignment in WaterlevelFacet.
2012-01-17 Felix Wolfsteller Made StaticWQKmsArtifact a fully featured Artifact.
2012-01-17 Felix Wolfsteller Cosmetics.
2012-01-17 Felix Wolfsteller Refactored to easier enjoy benefits of caching.
2012-01-17 Felix Wolfsteller Cosmetics, added new DataFacet constructor.
2012-01-16 Sascha L. Teichmann Use improved caching for cross section lines data.
2012-01-16 Sascha L. Teichmann Added cached/chunked access to cross section lines. TODO: Use the FastCrossSectionLines.
2012-01-16 Ingo Weinzierl Added a new calculation option for historical discharge curves.
2012-01-16 Felix Wolfsteller Added certain facets to compatibility matrix.
2012-01-16 Felix Wolfsteller Fixed annotations state xml.
2012-01-16 Felix Wolfsteller Cosmetics.
2012-01-16 Ingo Weinzierl Enabled old floodmap calculations for output type 'map'.
2012-01-13 Raimund Renkert Initial implementation for module 'new chart'.
2012-01-13 Felix Wolfsteller Cosmetics.
2012-01-13 Felix Wolfsteller Avoid an unlikely NPE.
2012-01-13 Felix Wolfsteller Prevent range collapsing when negative values are given.
2012-01-12 Raimund Renkert Changed the MapArtifact name to 'new_map'.
2012-01-12 Sascha L. Teichmann StableXYDifferenceRenderer: Added code to calculate the area of the generated polygons.
2012-01-12 Sascha L. Teichmann StableXYDifferenceRenderer: Replaced System.err.println()s with proper logging.
2012-01-12 Felix Wolfsteller Fix flys/issue450 (i18n: Datenkorb: longitudinal-section).
2012-01-12 Felix Wolfsteller Added accidentally ommitted ChangeLog entry.
2012-01-12 Felix Wolfsteller Implementation towards areas at other than first axis (flys/issue441).
2012-01-12 Felix Wolfsteller Removed call to removed functions.
2012-01-12 Felix Wolfsteller Cosmetics.
2012-01-11 Felix Wolfsteller Fix flys/issue439, made annotations available via datacage.
2012-01-11 Raimund Renkert Introduced new output type 'map'.
2012-01-11 Felix Wolfsteller Fix flys/issue446: Added default theme for certain mainvalues.
2012-01-11 Sascha L. Teichmann Removed security problem when working with map infos.
2012-01-11 Sascha L. Teichmann Removed superfluous imports.
2012-01-11 Ingo Weinzierl Made old calculation results available for floodmaps.
2012-01-10 Ingo Weinzierl Implemented initialize() in FloodMapState to enable cloning floodmaps.
2012-01-10 Ingo Weinzierl Made classes to merge Collection Outs more verbose for better debugging.
2012-01-09 Ingo Weinzierl Call State.initialize() for each State of an Artifact in FLYSArtifact.
2012-01-07 Sascha L. Teichmann Added missing service to invalidate the caches via the REST interface.
2012-01-06 Ingo Weinzierl #298 Fixed broken auto-zoom-to-wsplgen in floodmaps.
2012-01-06 Felix Wolfsteller Add cache config for static wqkms data.
2012-01-06 Raimund Renkert Added initial state to map artifact to be able to advance and step back.
2012-01-06 Felix Wolfsteller Fix name for certain facets loaded via datacage.
2012-01-06 Ingo Weinzierl #196 Localized the WQ labels in CSV exports.
2012-01-06 Felix Wolfsteller flys/issue442 (i18n: Datenkorb: flood-protections)
2012-01-06 Felix Wolfsteller Fix typo in meta data, such that string can be translated in GUI.
2012-01-05 Sascha L. Teichmann Added a service to invalidate caches by their names. Useful tp prevent cache inconsistencies caused by external ETL processes.
2012-01-05 Felix Wolfsteller Fixed issue432 (legenditem-size ignored for area legend items).
2012-01-05 Raimund Renkert Implemented new module "new map".
2012-01-05 Ingo Weinzierl #444 Take care on NullPointerExceptions in getWQMode. Take 'false' as default value if no 'wq_free' item is existing.
2012-01-05 Felix Wolfsteller Disable cross section cache to avoid lazy initialization issues.
2012-01-05 Ingo Weinzierl #447 removed empty Outputs from Collection's attribute.
2012-01-05 Ingo Weinzierl #440 Support river axes that consist of more than a single geometry.
2012-01-05 Ingo Weinzierl Repaired broken legend items.
2012-01-04 Ingo Weinzierl Added support for pointsize in chart themes.
2012-01-04 Ingo Weinzierl Small bugfix: use correct keys for buffering min/max values in EnhancedLineAndShapeRenderer.
2012-01-04 Ingo Weinzierl Moved JFreeChart specific classes to de.intevation.flys.jfree and added required imports.
2012-01-04 Ingo Weinzierl Performance improvements for EnhancedLineAndShapeRenderer: buffer minimum and maximum for each series.
2012-01-04 Ingo Weinzierl #393 Added a new Renderer and Options in Themes that allow displaying minimum and maximum of a chart series.
2012-01-03 Felix Wolfsteller Allow styling of outline of areas.
2012-01-03 Ingo Weinzierl #104 Use Wst.determineMinMaxQFree() to determine the min/max Qs at a given kilometer.
2012-01-03 Felix Wolfsteller Adjust Area styles.
2012-01-02 Ingo Weinzierl #370 Added a 'W at gauge' column to CSV exports if 'W at gauge' mode has been selected.
2012-01-02 Ingo Weinzierl Added i18n strings used in CSV exports.
2012-01-02 Ingo Weinzierl Improved the WaterlevelExporter: added range check for W/Q at gauge.
2012-01-02 Ingo Weinzierl Part 2 of #125: add gaugename and Q description based on the selected WQ mode.
2012-01-02 Ingo Weinzierl Removed unused imports.
2012-01-02 Ingo Weinzierl Part 1 of #125: added a description for a location to the WaterlevelExport.
2011-12-29 Ingo Weinzierl Added min/max values for free Qs to the Artifact's DESCRIBE document.
2011-12-28 Ingo Weinzierl Fixed order to determine correct step width of Qs and Ws.
2011-12-28 Ingo Weinzierl Validate user defined Qs based on the start kilometer ('Q free').
2011-12-28 Ingo Weinzierl Compute better step width for W/Q input.
2011-12-27 Ingo Weinzierl Some refactoring done: all Sections subclass TypeSection now to be able to use the convinience methods for string, integer, double and boolean attributes.
2011-12-27 Ingo Weinzierl Make use of the export size for charts specified in ChartSettings if a chart export is requested.
2011-12-27 Ingo Weinzierl Added an ExportSection to ChartSettings which provides attributes for chart 'width' and 'height'.
2011-12-27 Ingo Weinzierl Make use of user defined legend font size while chart creation.
2011-12-27 Ingo Weinzierl Make use of user defined axes font sizes.
2011-12-27 Ingo Weinzierl Use the user defined font size to set Y axes label fonts sizes.
2011-12-27 Ingo Weinzierl Added missing getYAxisWalker() in CrossSectionGenerator and create new instances of IdentfifiableNumberAxis in XYChartGenerator.createYAxis(int).
2011-12-27 Ingo Weinzierl Make use of user defined axes labels during chart creation.
2011-12-27 Ingo Weinzierl Use axes ranges specified in ChartSettings for zooming in charts.
2011-12-23 Ingo Weinzierl Centralized the creation of new NumberAxis - new NumberAxis instances in FLYS will be from type IdentifiableNumberAxis which subclasses JFreeChart's NumberAxis.
2011-12-23 Ingo Weinzierl Improved chart title and subtitle creation in ChartGenerators - all ChartGenerators make now use of title and subtitle provided by ChartSettings.
2011-12-23 Ingo Weinzierl Make use of first attributes specified in the ChartSettings. NOTE: work is still in progress.
2011-12-23 Ingo Weinzierl Improved ChartSettings and depending classes to avoid a lot of casting.
2011-12-22 Ingo Weinzierl #242 Added header with meta information into CSV exports.
2011-12-22 Felix Wolfsteller Cosmetics, removed uncalled code path.
2011-12-22 Felix Wolfsteller Added ommitted ChangeLog entry.
2011-12-22 Felix Wolfsteller Include selected km in cross section diagrams subtitle.
2011-12-22 Felix Wolfsteller Cosmetics, doc.
2011-12-22 Felix Wolfsteller Make only newest CrossSection intially active in diagrams.
2011-12-22 Felix Wolfsteller Added function to check whether a CrossSection is the 'newest' for its river.
2011-12-21 Ingo Weinzierl Bugfix: repaired broken named values in exports - the last solution had bad side effects.
2011-12-21 Felix Wolfsteller Better initialize cross_section.km of cross-section-artifacts.
2011-12-21 Felix Wolfsteller Initialize km of cross-section artifact to a better value (not all cases covered, yet).
2011-12-21 Ingo Weinzierl #252 Set titles in waterlevel exports to named main values if those are existing for given Q values.
2011-12-20 Felix Wolfsteller Fix malcondition where first renderer is StableXYDifferenceRenderer.
2011-12-20 Felix Wolfsteller Store additional Parameter in AreaArtifact (paint everything between curve a and b?).
2011-12-20 Felix Wolfsteller Added a transparency setting to area theme style.
2011-12-20 Felix Wolfsteller Make ('static') WKms data available for area calculations.
2011-12-20 Ingo Weinzierl Changed the seperator character between Ws and Qs in the Artifact's DESCRIBE document.
2011-12-20 Felix Wolfsteller Enable basicst area rendering in longitudinal section diagrams.
2011-12-20 Felix Wolfsteller Refactored, make usage of blackboarddatafacet.
2011-12-20 Felix Wolfsteller Cosmetics, renamed facet type.
2011-12-20 Felix Wolfsteller Make Waterlevelfacet deliver data via blackbord.
2011-12-20 Ingo Weinzierl Bugfix: format all Ws and Qs in WQSelect State.
2011-12-20 Felix Wolfsteller New facet, will ease converting other facets to be able to contribute to area computations.
2011-12-20 Felix Wolfsteller Removed obsolete imports.
2011-12-20 Felix Wolfsteller Removed obsolete imports.
2011-12-20 Felix Wolfsteller Let StableDifferenceRenderer create a rectangular legenditem.
2011-12-20 Felix Wolfsteller Improved area rendering workflow.
2011-12-20 Felix Wolfsteller Added theme defaults for areas, added facets to compatibility matrices.
2011-12-20 Felix Wolfsteller Prepare ability to paint areas in longitudinal section diagrams, too (next to CrossSection diagrams).
2011-12-20 Felix Wolfsteller Cosmetics.
2011-12-19 Felix Wolfsteller Refactoring, added Style accessors for area styles.
2011-12-19 Ingo Weinzierl Disabled default values in Artifact's DESCRIBE document - added a system property to re-enable those default values.
2011-12-19 Ingo Weinzierl #419 Fixed broken Facet name creation in discharge longitudinal sections.
2011-12-19 Ingo Weinzierl #380 Validate the user selected DEM in the server.
2011-12-19 Felix Wolfsteller Roll-back accidentally commited changes.
2011-12-19 Felix Wolfsteller Hide deleted facets from outgenerators.
2011-12-19 Felix Wolfsteller Store and access area.name data item.
2011-12-16 Felix Wolfsteller Fix, accidentally added wrong factory in last commit.
2011-12-16 Felix Wolfsteller Register area artifact factory.
2011-12-16 Felix Wolfsteller Added area facets to cross section compatibility matrix.
2011-12-16 Felix Wolfsteller Add area dataseries when facet delivers one.
2011-12-16 Felix Wolfsteller Added simple area registering functions.
2011-12-16 Felix Wolfsteller Made StaticState a bit more convenient to use.
2011-12-16 Felix Wolfsteller Register AREA('area') facet type.
2011-12-16 Felix Wolfsteller Register under a key on blackboard to meet assumptions by areaartifact.
2011-12-16 Felix Wolfsteller Added partial area-infrastructure.
2011-12-16 Ingo Weinzierl Improved the ChartSettings - now, each chart writes proper AxisSections into the ChartSettings.
2011-12-16 Ingo Weinzierl Some optimizations during out() operation of FLYSArtifactCollection.
2011-12-16 Ingo Weinzierl Added an INFO statement that displays the duration time for the out() operation.
2011-12-16 Ingo Weinzierl Implemented the buildAxisSections() method in XYChartGenerator to include an AxisSection for the X axis.
2011-12-16 Ingo Weinzierl Bugfix: add new Outputs during merge process in AttributeWriter.
2011-12-16 Sascha L. Teichmann Little optimisation when writing CollectionAttributes
2011-12-16 Ingo Weinzierl Parse the Settings of each Output during Collection's describe() operation.
2011-12-16 Ingo Weinzierl Make reuse of the old CollectionAttribute during the describe() operation of FLYSArtifactCollection - remove the old facets only.
2011-12-16 Ingo Weinzierl Added more attributes to ChartSettings AxisSection.
2011-12-15 Ingo Weinzierl Added axis sections into charts Settings.
2011-12-15 Ingo Weinzierl Improved the ChartSettings returned by charts - it now contains a legend specific section.
2011-12-15 Ingo Weinzierl Finished the ChartSection part of the chart Settings returned by the XYChartGenerator.
2011-12-15 Ingo Weinzierl Prepare the OutGenerator during the describe() operation of the FLYS Collection to enable the OutGenerator to return an initial Settings object.
2011-12-15 Ingo Weinzierl Fixed wrong usage of DOM operations in Settings Attributes.
2011-12-14 Ingo Weinzierl Implemented a ChartSettings with relevant Sections and Attributes for charts (NOTE: Work still in progress).
2011-12-14 Felix Wolfsteller Cosmetics, docs.
2011-12-14 Felix Wolfsteller Remove needless imports.
2011-12-14 Felix Wolfsteller Fix/survive certain minor malconditions.
2011-12-14 Felix Wolfsteller Cosmetics.
2011-12-14 Felix Wolfsteller Implement and use WaterLineArtifact interface.
2011-12-14 Felix Wolfsteller Added WaterLineArtifact Interface.
2011-12-14 Ingo Weinzierl Added a getSettings() operation to OutGenerator - FLYSArtifactCollection will now evaluate all available Outputs and create initial Settings using OutGenerators if the Settings for an Output is missing.
2011-12-13 Felix Wolfsteller Recommend cross sections if they can be shown.
2011-12-13 Felix Wolfsteller Register crosssection artifact-factory.
2011-12-13 Ingo Weinzierl Introduced a CollectionAttribute class that stores the information provided by the Collection's attribute document.
2011-12-13 Felix Wolfsteller Server-side of interactive cross-section diagrams.
2011-12-13 Felix Wolfsteller Cosmetics.
2011-12-13 Ingo Weinzierl Removed superfluous imports.
2011-12-13 Ingo Weinzierl Added a CollectionDescriptionHelper that helps generating DESCRIBE documents for Collections.
2011-12-12 Felix Wolfsteller Given CrossSections a name, let crosssection facets survive.
2011-12-12 Ingo Weinzierl Improved the Scheduler to be able to cancel running WSPLGEN jobs.
2011-12-09 Felix Wolfsteller Add data items to StaticFLYSArtifacts description document.
2011-12-09 Felix Wolfsteller Add helper function.
2011-12-09 Felix Wolfsteller Preparations for better CrossSection diagrams.
2011-12-09 Felix Wolfsteller Configure cross_sections cache.
2011-12-09 Felix Wolfsteller Added method to CrossSectionFactory to get single CrossSection, employ cache.
2011-12-09 Felix Wolfsteller New CrossSectionArtifact.
2011-12-09 Raimund Renkert Issue 413.
2011-12-08 Felix Wolfsteller Cosmetics.
2011-12-08 Felix Wolfsteller Mainly documentation.
2011-12-06 Sascha L. Teichmann Added 'Bezugslinie' to choice of calculation modes.
2011-12-06 Felix Wolfsteller Further flys/issue420 fix, NaN-guard X axis extent.
2011-12-06 Felix Wolfsteller Partial fix for flys/issue420 (Mosel/DischargeCurves), do survive empty datasets when calculating axis extents.
2011-12-06 Felix Wolfsteller Fix flys/issue423, do not interpolate main values at gauge.
2011-12-05 Ingo Weinzierl Modified prefix constants for Mapserver layers.
2011-12-05 Ingo Weinzierl Various bugfixes in WSPLGEN parameterization.
2011-12-05 Felix Wolfsteller Allow longitudinal_section.q facets in wdiff states output.
2011-12-05 Felix Wolfsteller Refactored LongitudinalSection- and WDiff-Generators, fixed minor issues.
2011-12-05 Ingo Weinzierl Added missing state titles.
2011-12-05 Felix Wolfsteller Fix first axis (do not include zero).
2011-12-02 Felix Wolfsteller Include state data items in description document of collection.
2011-11-30 Felix Wolfsteller Added list of files to ChangeLog entry.
2011-11-30 Sascha L. Teichmann Removed superfluous imports.
2011-11-30 Sascha L. Teichmann Make it compile again.
2011-11-30 Felix Wolfsteller Introduce pre-rendering inter-facet communication phase ('blackboard pass').
2011-11-30 Felix Wolfsteller Adjusted to doOut signature change.
2011-11-30 Felix Wolfsteller Changed doOut signature, side effect from blackboard feature (to come).
2011-11-28 Felix Wolfsteller Fix compilation, default 0-excluding behavior of axes.
2011-11-28 Felix Wolfsteller Fix documentation.
2011-11-28 Felix Wolfsteller Fix LongitudinalSections multi-axes plotting behavior.
2011-11-28 Felix Wolfsteller Refactored XYChartGenerator to have better working multi-axes features.
2011-11-25 Sascha L. Teichmann Added the implementation of the 'Bezugslinienverfahren'.
2011-11-25 Sascha L. Teichmann Refactored the code of the 'berechnete Abflusskurve' to be reusable in the 'Bezugslinienverfahren'.
2011-11-25 Sascha L. Teichmann 'W auf freier Strecke' calculation. Fetch corresponding Qs for given Ws from the WST model
2011-11-25 Felix Wolfsteller Fix bug when adding Q Facet data to LongitudinalSection plots.
2011-11-25 Felix Wolfsteller Added handling of empty plots.
2011-11-25 Felix Wolfsteller When having axis in diagrams, always have one on the left.
2011-11-24 Felix Wolfsteller Better use multiple axis feature in chart generators.
2011-11-24 Felix Wolfsteller Fix legend and themeing with new multiaxis feature.
2011-11-24 Felix Wolfsteller Allow more than two datasets and more flexibility with axes in plots. Based on patch by S. Teichmann.
2011-11-23 Felix Wolfsteller Cosmetics, docs.
2011-11-23 Felix Wolfsteller (Minor) cosmetics, docs.
2011-11-23 Felix Wolfsteller Minor cosmetic (doc).
2011-11-23 Felix Wolfsteller Resolved TODO about caching certain WstValueTables.
2011-11-22 Ingo Weinzierl Added a new Artifact to enable users to add external WMS layers to floodmaps.
2011-11-22 Felix Wolfsteller Fixed flys/411 (Oracle max expressions for annotations query).
2011-11-22 Felix Wolfsteller Optimize query to fix annotations fetching on oracle, by Sascha Teichmann.
2011-11-17 Felix Wolfsteller Added interpolated wkms to compatibility matrix for computed discharge curve diagrams.
2011-11-17 Felix Wolfsteller Use importData convenvience function.
2011-11-17 Felix Wolfsteller Add annotaitons for STATIC_WKMS_INTERPOL facets in Computed Discharge Curves.
2011-11-17 Felix Wolfsteller Give flood* artifacts Facets the STATIC_WKMS_INTERPOL FacetType.
2011-11-17 Felix Wolfsteller Prevent ArrayIndexOutOfBounds, log method entry.
2011-11-17 Felix Wolfsteller Added new STATIC_WKMS_INTERPOL Facet Type.
2011-11-16 Ingo Weinzierl Avoid WMS layer names that begin with digits to ensure valid WMS GetFeatureInfo responses.
2011-11-16 Felix Wolfsteller Extended DC conf to offer w/q kind of data (currently used in computed discharge curve diagr. only).
2011-11-16 Felix Wolfsteller Handle STATIC_WQ_ANNOTATION type facets in Computed Discharge Curve Diagrams.
2011-11-16 Felix Wolfsteller Differentiate between wsts whose name starts with 'height' and all others.
2011-11-16 Felix Wolfsteller Extended compatibility matrices.
2011-11-16 Felix Wolfsteller Added new STATIC_WQ_ANNOTATIONS Facet Type.
2011-11-16 Ingo Weinzierl Added a Facet attribute for WMSLayerFacets that determines if a facet (WMS layer) is queryable via WMS GetFeatureInfo request.
2011-11-16 Felix Wolfsteller Use single column wst interpolators from wqkmsinterpolartifact.
2011-11-16 Felix Wolfsteller Added methods to create WstValueTables ('interpolators') for specific columns of wsts.
2011-11-16 Felix Wolfsteller Added Point Stlye for other.wq data.
2011-11-16 Sascha L. Teichmann Do not re-evaluate constant size() in for-loops.
2011-11-16 Felix Wolfsteller Respect position for computed discharge curve when interpolating WQs for e.g. for fixations.
2011-11-16 Felix Wolfsteller Recommend fixations for computed discharge curves.
2011-11-16 Felix Wolfsteller Register wqinterpol artifact factory in configuration.
2011-11-16 Felix Wolfsteller Added omitted ChangeLog entry.
2011-11-16 Felix Wolfsteller Refactored to use StyledSeriesBuilder to add Points to DataSeries.
2011-11-16 Felix Wolfsteller Handle interpolated WQ data in Computed Discharge Curve Diagram.
2011-11-16 Felix Wolfsteller Adjusted implementation to match implementation in StaticWKmsArtifact.
2011-11-16 Felix Wolfsteller Removed logging noise, find better suited rows for W interpolation.
2011-11-16 Felix Wolfsteller Employ cache for WstValueTables that have been fetched by wst_id.
2011-11-16 Felix Wolfsteller Fix and use SQL statement to fetch wst-names.
2011-11-15 Felix Wolfsteller New Facet and Artifact to access interpolated W/Q data (todo-rich).
2011-11-15 Felix Wolfsteller New convenience function to copy data from one artifact to another.
2011-11-15 Felix Wolfsteller New method to get interpolator for given wst_ids, also prepopulate arrays with NaNs.
2011-11-15 Felix Wolfsteller Fix definition.
2011-11-15 Felix Wolfsteller Added function to get name/description of Wst.
2011-11-15 Felix Wolfsteller Added new FacetType 'STATIC_WQ'.
2011-11-15 Felix Wolfsteller (Picky) cosmetics.
2011-11-15 Felix Wolfsteller Added translations for Mosel, Elbe and Saar.
2011-11-15 Felix Wolfsteller Added new (at fixed columns) interpolation mechanism.
2011-11-14 Felix Wolfsteller Minor doc.
2011-11-13 Sascha L. Teichmann Removed dead ';' from empty bodies.
2011-11-13 Sascha L. Teichmann StableXYDifferenceRenderer: More efficient use of TDoubleArrayList
2011-11-13 Sascha L. Teichmann StableXYDifferenceRenderer: Make rendering work with definition holes.
2011-11-12 Sascha L. Teichmann CrossSectionApp: Draw water, too.
2011-11-12 Sascha L. Teichmann Last commit broke due to network error.
2011-11-12 Sascha L. Teichmann CrossSectionApp: draw ground with StableXYDifferenceRenderer
2011-11-11 Felix Wolfsteller Include computed discharge curves in dc conf.
2011-11-11 Felix Wolfsteller Somewhat unified user-part of dc config.
2011-11-11 Ingo Weinzierl Added support for fillcolors of polygons in floodmaps.
2011-11-11 Ingo Weinzierl Set correct Mapserver attribute name to adjust the width of a line.
2011-11-11 Ingo Weinzierl Added support for labels in Mapserver layers and options to modify its style.
2011-11-11 Felix Wolfsteller Extended dc conf.
2011-11-11 Ingo Weinzierl Removed needless imports.
2011-11-10 Ingo Weinzierl Added new WMSFixpointsArtifact for displaying fixpoints in maps.
2011-11-10 Felix Wolfsteller Refactored datacage conf to (re)use macros.
2011-11-10 Ingo Weinzierl Added new WMSBuildingsArtifact for displaying buildings in maps.
2011-11-10 Ingo Weinzierl Added new WMSLineArtifact for displaying lines in maps.
2011-11-10 Felix Wolfsteller Adjusted DC for heightmarks (and other) in discharge longitudinal sections.
2011-11-10 Felix Wolfsteller Have old_data in dc for discharge_longitudinal_sections.
2011-11-10 Felix Wolfsteller Handle WQKm and WKm Facets in Discharge Longitudinal Sections.
2011-11-10 Felix Wolfsteller Helper for FacetTypes.
2011-11-10 Felix Wolfsteller Revert/apply accidental/corrected commit.
2011-11-10 Felix Wolfsteller Made Discharge Longitudinal Section out compatible with Annotations.
2011-11-10 Felix Wolfsteller Extracted Annotations-Macro in dc conf, recommend Annotations for discharge
2011-11-10 Felix Wolfsteller Handle Annotation Facets in DischargeLongitudinalSection diagrams.
2011-11-10 Felix Wolfsteller Cosmetics, resolve code duplicate.
2011-11-10 Felix Wolfsteller Improved logging to include exception in fail case of spline interpolation of wst.
2011-11-10 Felix Wolfsteller Improved loggin in error case for dc XPath expression resolution.
2011-11-10 Sascha L. Teichmann CrossSectionApp: split curves in separated datasets to make them renderable with different renderers.
2011-11-09 Ingo Weinzierl Added new WMSFloodplainArtifact for displaying floodplains in maps.
2011-11-09 Ingo Weinzierl Added new WMSCatchmentArtifact for displaying catchments in maps.
2011-11-09 Ingo Weinzierl Added new WMSHwsArtifact for displaying flood protection works.
2011-11-09 Ingo Weinzierl Replaced the dbconnection.include used by Mapserver - these information are provided by LayerInfo objects now, which reduces config overhead.
2011-11-09 Felix Wolfsteller Handle Height marks with point styles in WDifferences Diagrams.
2011-11-09 Felix Wolfsteller Let Q Duration Curves enter life inactive.
2011-11-09 Felix Wolfsteller Recommend mainvalues for Duration Curve Diagrams, minor refactoring.
2011-11-09 Felix Wolfsteller Handle MainValue Facets in Duration Curve Diagrams.
2011-11-09 Felix Wolfsteller Refactored, move doMainValueAnnotations to XYChartGenerator.
2011-11-09 Felix Wolfsteller Cosmetics, removed duplicate code.
2011-11-09 Felix Wolfsteller Minor cosmetics and let facets be inactive in duration curve diagrams.
2011-11-09 Felix Wolfsteller Allow wqkms in many outputs, mainvalues in duration curves.
2011-11-09 Ingo Weinzierl Made the floodmap compatible with an Oracle database.
2011-11-08 Felix Wolfsteller Fix flys/issue406 (~missing themes).
2011-11-08 Felix Wolfsteller Fix flys/issue405 (Datacage: Recommendations get loaded twice).
2011-11-08 Ingo Weinzierl Added a debug statement that prints out an exception.
2011-11-08 Ingo Weinzierl Removed orphanded datacage config which is no longer loadable.
2011-11-07 Ingo Weinzierl Added the 'post-describe' hook for Artifacts.
2011-11-07 Felix Wolfsteller Minor refactoring in preparation of generation of interpolators (WstValueTable) for static WQKms.
2011-11-07 Felix Wolfsteller Cosmetics, doc.
2011-11-07 Felix Wolfsteller Catch more specific Exception in FLYSArtifactCollection.
2011-11-04 Ingo Weinzierl Added datacage configuration, loader (Artifact and State) and a theme for cross section tracks.
2011-11-04 Felix Wolfsteller Re-enabled mainvalue-recommendation for computed discharge curves.
2011-11-04 Felix Wolfsteller Extract output names from artifact, not from state. Important when querying recommendations for an artifact with these outputs.
2011-11-04 Ingo Weinzierl Removed DEMs from floodmap datacage configuration.
2011-11-04 Ingo Weinzierl Refactored the RiverAxisArtifact and its State - uses the same base as WMSKmArtifact now.
2011-11-04 Felix Wolfsteller Prevent empty output-nodes in flyscollections attributes.
2011-11-04 Ingo Weinzierl Create layers for barrier lines and polygons only if they are really existing.
2011-11-04 Felix Wolfsteller Disable recommendations of mainvalues for discharge curves.
2011-11-04 Felix Wolfsteller Added new optional condition for theme-mappings: the output name.
2011-11-04 Felix Wolfsteller Defined default themes for other.w(q)kms .
2011-11-04 Felix Wolfsteller Minor comsetics.
2011-11-03 Felix Wolfsteller Added 'static' wqkms data access.
2011-11-03 Sascha L. Teichmann Added a dataset to zero mapper to circumvent shortcommings in XYDifferenceRenderer.
2011-11-03 Sascha L. Teichmann Added a copy of JFreeChart's XYDifferenceRenderer
2011-11-03 Felix Wolfsteller Changed theme-mapping mechanism to include further condition (on master-artifacts attributes), added point themes for longitudinal.ws for calculations at locations.
2011-11-03 Felix Wolfsteller Added ARTIFACT key to FLYSContextm, documentation.
2011-11-03 Sascha L. Teichmann CrossSectionApp: Re-enabled dumping data to disk.
2011-11-03 Sascha L. Teichmann Removed superfluous import
2011-11-03 Sascha L. Teichmann Simplified code in Datacage builder by using the new pair.
2011-11-03 Sascha L. Teichmann Rewritten CrossSectionApp to be useful as test bed for 'Raum/Flaeche' operations.
2011-11-02 Ingo Weinzierl Improved styles of WMS layers.
2011-11-02 Felix Wolfsteller Apply point theme to heightmark data imported via datacage to longitudinal section diagram.
2011-11-02 Felix Wolfsteller Cosmetics, doc.
2011-11-02 Felix Wolfsteller Fix bug where wrong attribute was set.
2011-11-02 Felix Wolfsteller Refactored to allow mainvalues in discharge curve diagrams, too.
2011-11-02 Felix Wolfsteller Removed logger/debuggin noise.
2011-11-02 Felix Wolfsteller Pass output name to artifacts getInitialFacetActivity, prevent gaps in collection attributes outputs facets positions.
2011-11-02 Felix Wolfsteller Give outputname to artifacts getInitialFacetActivity, generate second pair of MainvalueFacets for discharge curves.
2011-11-02 Felix Wolfsteller Define newish facet types (mainvalues for discharge curves).
2011-11-02 Felix Wolfsteller Configured discharge curve outs to allow inclusion of mainvalue facets.
2011-11-01 Ingo Weinzierl Determine correct bounding box a KMs WMS layer.
2011-11-01 Ingo Weinzierl Added datacage config and loaders for KM WMS layer in floodmaps.
2011-11-01 Felix Wolfsteller Fix incompilability.
2011-11-01 Felix Wolfsteller Minor preparations for WINFO/CrossSection to handle multiple cross-sections.
2011-11-01 Felix Wolfsteller Corrected CrossSection diagram/out to include one facet per computed waterlevel.
2011-10-31 Sascha L. Teichmann Polygon2D: Generate polygons for trivial cases.
2011-10-31 Sascha L. Teichmann Polygon2D: made it compilable again.
2011-10-31 Sascha L. Teichmann Polygon2D: More code to build polygons from curve.
2011-10-31 Sascha L. Teichmann Polygon2D: Handle start points when building polygons. Work in progress.
2011-10-31 Sascha L. Teichmann Polygon2D: moved 2D vector operation to separate class.
2011-10-31 Sascha L. Teichmann Small loop optimization
2011-10-30 Sascha L. Teichmann Interim checkin for polygon calculation.
2011-10-28 Sascha L. Teichmann Work in progress: Added polygon to help creating 'Raum/Flaeche' renderers.
2011-10-28 Ingo Weinzierl Initial commit to support styles in maps.
2011-10-28 Ingo Weinzierl Enabled the MapGenerator to create WMS layers with database datastore - riveraxis is the first layer that is no longer fetched from static WMS service but from user specific one.
2011-10-28 Felix Wolfsteller Added new StyledSeriesBuilder class and use it when adding points to XYSeries (in diagram generation).
2011-10-28 Felix Wolfsteller Add static data conf to w-difference / datacage.
2011-10-28 Felix Wolfsteller Load and display annotations in w-difference diagrams, minor polishing.
2011-10-28 Felix Wolfsteller Avoid NPE when compatibility matrix is empty for given output.
2011-10-28 Felix Wolfsteller Cosmetics, added simpler constructor for StaticState.
2011-10-28 Felix Wolfsteller Add annotations to allowed facets for longitudinal_section and w_differences outputs.
2011-10-28 Felix Wolfsteller Use compatibility matrix when creating collections output.
2011-10-28 Felix Wolfsteller Cosmetics and refactoring in FLYSArtifactCollection.
2011-10-28 Felix Wolfsteller Added method to FLYSArtifact to access ids of states.
2011-10-28 Ingo Weinzierl Re-create FLYS mapfile when FloodMapState.endOfLife() is called.
2011-10-28 Ingo Weinzierl Modified the process to create mapfiles.
2011-10-28 Felix Wolfsteller Cosmetics, docs.
2011-10-28 Felix Wolfsteller Let Output and Attribute Parsers collect Facets during processing.
2011-10-28 Felix Wolfsteller Fixed incorrect ChangeLog-merge.
2011-10-28 Felix Wolfsteller Extracet getFlysContext from FLYSArtifact to FLYSUtils.
2011-10-28 Ingo Weinzierl Made flys-artifacts compilable again.
2011-10-28 Ingo Weinzierl Improved the MapfileGenerator. It offers methods to create barrier and wsplgen layer files for mapserver.
2011-10-28 Ingo Weinzierl Added a new MapGenerator which only returns a map configuration document at the moment (work still in progress).
2011-10-27 Felix Wolfsteller Prevent recommendation of not yet loadable data.
2011-10-27 Felix Wolfsteller Reduce logging noise (downgrade an 'error' to 'debug').
2011-10-27 Felix Wolfsteller Restore mapping of state id to facets (revert, rev 3083 and 3088).
2011-10-26 Felix Wolfsteller Cosmetics, documentation.
2011-10-26 Felix Wolfsteller Prepare rendering of added other (static) WKms and Differences in LongitudinalSection Diagrams.
2011-10-26 Felix Wolfsteller Cosmetics.
2011-10-26 Felix Wolfsteller Store Facets without association to state id.
2011-10-26 Felix Wolfsteller Adjusted winfo.xml to new semantics.
2011-10-26 Felix Wolfsteller Do not store association of states to facets, let artifacts keep facets in a pure list.
2011-10-26 Felix Wolfsteller Added DC configuration to load additional data in longitudinal section.
2011-10-26 Felix Wolfsteller Cosmetics, docs.
2011-10-25 Felix Wolfsteller In LongitudinalSection-Diagram, Qs enter inactive.
2011-10-25 Felix Wolfsteller Fix broken dc config.
2011-10-25 Felix Wolfsteller Configured datacage to hand out id of artifact that can produce the w_diff.
2011-10-25 Felix Wolfsteller Restored correct drawing behavior for Annotations.
2011-10-25 Felix Wolfsteller Include differences in datacage.
2011-10-25 Felix Wolfsteller Cosmetics.
2011-10-24 Felix Wolfsteller Added accidentally ommitted ChangeLog entry for last commit.
2011-10-24 Felix Wolfsteller Added default diff theme, avoid possible NPE.
2011-10-21 Sascha L. Teichmann Added some simple caching for themes. Only used in sticky annotations by now.
2011-10-21 Raimund Renkert Apply the attributes 'showpoints' and 'showline'.
2011-10-21 Sascha L. Teichmann Added /dev/null Graphics2D object to be used in the info rendering pass of the diagram generation.
2011-10-21 Raimund Renkert Draw the text background and use orientation attribute.
2011-10-21 Raimund Renkert Renamed text background attribute and parse text attributes correctly.
2011-10-20 Sascha L. Teichmann Added Service Service to lookup the Nth nearest neighbors for a set of given cross section ids and kms.
2011-10-20 Raimund Renkert Added methods to extract further attributes from theme.
2011-10-20 Ingo Weinzierl Improved the Themes: we now support special themes for facets which need to match a given pattern string.
2011-10-20 Raimund Renkert Added new theme attributes.
2011-10-19 Felix Wolfsteller Fix NPE in WDiff-diagram because no ranges present in masterartifact.
2011-10-19 Felix Wolfsteller Fix setting of masterartifact in flyscollections.
2011-10-19 Ingo Weinzierl Prepared the DESCRIBE document of a WINFO Artifact so that named main values for Qs are displayed.
2011-10-19 Raimund Renkert ComputedDischargeCurveW and ComputedDischargeCurveQ inherit attributes from
2011-10-19 Sascha L. Teichmann Fix for flys/issue316
2011-10-19 Ingo Weinzierl Improved the title creation of WSP Q and W facets - named main values are taken into account while title creation.
2011-10-19 Felix Wolfsteller Fix datacage to let client load flood-protection and zuss.
2011-10-19 Raimund Renkert Apply theme attributes to axis annotation.
2011-10-19 Felix Wolfsteller Create label from data String to revive names in client.
2011-10-19 Sascha L. Teichmann XYChartGenerator: Do not crash if no zoom axis given
2011-10-19 Ingo Weinzierl Enabled support for PDF and SVG chart exports.
2011-10-18 Felix Wolfsteller Simplified handling of W(Q)Kms data to plot.
2011-10-18 Felix Wolfsteller In WDiff-diagram generation respect other.wkms facets (flood-prot, zus).
2011-10-18 Felix Wolfsteller Handle StaticWKmsArtifacts in WDifferencesState.
2011-10-18 Felix Wolfsteller Also display the 'zus' in wdiff-input datacage.
2011-10-18 Raimund Renkert Added new virtual theme for text and let 'Annotations' inherit from the new
2011-10-18 Felix Wolfsteller Give StaticWKmsArtifacts proper names, and pre-deselect them.
2011-10-18 Felix Wolfsteller Adjusted datacage-configuration to present flood-protections in certain case.
2011-10-18 Felix Wolfsteller Register staticwkms factory to spawn StaticWKms-Artifacts.
2011-10-18 Felix Wolfsteller Fetch name of static WKms.
2011-10-18 Felix Wolfsteller Store parameterization in data, not in fields.
2011-10-18 Felix Wolfsteller Add convenience method to add default data as string.
2011-10-18 Felix Wolfsteller Added new Artifact and Facet to access 'static' data via WKmsFactory.
2011-10-18 Felix Wolfsteller Added WKmsFactory.
2011-10-18 Felix Wolfsteller Cosmetics, docs.
2011-10-18 Felix Wolfsteller Added constructor that will be needed in creation of WKms for 'static' data.
2011-10-18 Felix Wolfsteller Fix missing annotations ('Streckenfavoriten') style.
2011-10-17 Sascha L. Teichmann FLYSArtifactCollection: Small optimizations
2011-10-17 Ingo Weinzierl FLYSArtifactCollection.ThemeList makes now use of ManagedDomFacet to read all attributes of a Facet.
2011-10-17 Sascha L. Teichmann flys/issue314: Variables in datacage are now case insensitive.
2011-10-17 Ingo Weinzierl Added support for removing themes from output.
2011-10-17 Raimund Renkert Apply line type to styled themes.
2011-10-17 Ingo Weinzierl Bugfix: #226 Set the upper bound of duration curve charts to 364.
2011-10-17 Ingo Weinzierl #253 Modified the title creation of chart curves - titles will now equal the Facet's description.
2011-10-17 Felix Wolfsteller Fix flys/issue363 (W-INFO/ Abflusskurve, Extremwert-Rendering).
2011-10-14 Ingo Weinzierl Improved the mapfile templates to create nicer GetLegendGraphic images.
2011-10-14 Felix Wolfsteller Allow simple codepaths to have Facets initially being 'inactive' (wrt rendering).
2011-10-13 Felix Wolfsteller Removed obsolete imports.
2011-10-12 Ingo Weinzierl Added a further attribute to the feature type description for barriers.
2011-10-12 Felix Wolfsteller Added i18n for state.winfo,waterlevel_pair_select .
2011-10-12 Felix Wolfsteller Addressed 'wrong label' issue of wdiff csv-export.
2011-10-12 Felix Wolfsteller Cosmetics, docs.
2011-10-12 Felix Wolfsteller Fix remainder of flys/issue304 (Erweiterte Funktionen W-Differenzen).
2011-10-11 Felix Wolfsteller Added wdiff-chart translations.
2011-10-11 Felix Wolfsteller Expose translateable Strings as constants.
2011-10-11 Felix Wolfsteller Fix most labels in w-diff diagrams; refactoring to allow easier adoption of
2011-10-11 Ingo Weinzierl Bugfix: #383 Add further y-axes before adjusting the ranges for each y-axis.
2011-10-10 Sascha L. Teichmann XYChartGenerator: s/new Integer(small)/Integer.valueOf(small)/
2011-10-10 Sascha L. Teichmann JFreeChart: Do not fire change events for each and every data point added.
2011-10-10 Felix Wolfsteller Fixed incorrect indexing of facets when doing multiple (w)differences.
2011-10-10 Felix Wolfsteller In WDifferenceCurveGenerator use slightly modified doWOut-implementation of LongitudinalSectionGenerator.
2011-10-10 Felix Wolfsteller Fix import from last commit.
2011-10-10 Felix Wolfsteller Let WaterlevelPairSelect send "old" data.
2011-10-10 Ingo Weinzierl Bugfixes: #150 #345 Corrected the determination to invert the x axis in longitudinal section charts.
2011-10-10 Felix Wolfsteller Cosmetics, docs, annotations.
2011-10-10 Ingo Weinzierl Bugfix: #220 Made y-axes of longitudinal and crosssection charts look equal.
2011-10-10 Ingo Weinzierl Bugfix: #189 Changed the order of a duration curve CSV export.
2011-10-07 Sascha L. Teichmann Worked on flys/issue150
2011-10-07 Ingo Weinzierl Take care on empty ranges (null) while preparing single point ranges.
2011-10-07 Ingo Weinzierl Bugfix: #114 Enabled rendering charts with a single data point.
2011-10-07 Felix Wolfsteller Cosmetics.
2011-10-07 Ingo Weinzierl Bugfix: #353 Enabled chart's to be drawn with proper axes set even if no data is contained.
2011-10-07 Ingo Weinzierl Changed max number of digits for AT exports.
2011-10-06 Sascha L. Teichmann ATWriter: Get rid of buggy first line code.
2011-10-05 Sascha L. Teichmann fixed flys/issue201
2011-10-05 Sascha L. Teichmann fixed flys/issue177
2011-10-05 Ingo Weinzierl Improved the creation/rendering of annotations (km favorites, mainvalues).
2011-10-05 Sascha L. Teichmann Removed code duplication of guessWaterIncreasing()
2011-10-05 Ingo Weinzierl Bugfixes for various issues: Improved rendering process of annotations.
2011-10-05 Sascha L. Teichmann Backjump correction: Finally looks fine.
2011-10-05 Ingo Weinzierl AnnotationArtifact: Bugfixes and enabled cache support.
2011-10-04 Sascha L. Teichmann flys/issue31: Simplified the back jump correction code a lot.
2011-10-04 Ingo Weinzierl Modified code to determine the elevation model of Wsts in the LongitudinalSectionGenerator.
2011-10-04 Sascha L. Teichmann Moved some generic double array code from BackjumpCorrector to DoubleUtil
2011-10-04 Sascha L. Teichmann Added code to interpolate double values in a sorted array
2011-10-04 Sascha L. Teichmann Removed superfluous imports.
2011-10-04 Ingo Weinzierl Bugfix: #330 Add problem if no data was found for duration curves.
2011-10-04 Ingo Weinzierl Added facet and index information to theme which are stored at CollectionItems.
2011-10-04 Ingo Weinzierl Bugfix: #346 Modified x and y axis titles of longitudinal section charts.
2011-09-30 Ingo Weinzierl Bugfix: #351 Modified determination of single values specified by min/max values and an interval.
2011-09-30 Felix Wolfsteller Fix flys/issue334 (CrossSection output shown even without calculation result).
2011-09-30 Ingo Weinzierl Bugfix: #176 and #349 Create proper titles for W and Q waterlevel facets.
2011-09-30 Felix Wolfsteller Show proper labels for selected differences.
2011-09-29 Sascha L. Teichmann Fixed issues flys/issue244, flys/issue332
2011-09-28 Felix Wolfsteller Use StringUtil.wWrap , fix wrong loop, minor refac and cosmetics.
2011-09-28 Felix Wolfsteller Extracted/use StringUtil.wWrap .
2011-09-28 Ingo Weinzierl Write gauge determined in MainValuesService to log.
2011-09-28 Ingo Weinzierl Bugfix: #332 Made AT-exports compatible with desktop FLYS.
2011-09-28 Ingo Weinzierl Bugfix: #328 Improved datacage configuration and labels for selected waterlevels.
2011-09-28 Ingo Weinzierl Made feed() operation able to remove existing data items from Artifact's data pool.
2011-09-28 Felix Wolfsteller Extracted StringUtil.unbracket from WaterlevelSelectState.strip .
2011-09-27 Ingo Weinzierl Little modifications for making recommendations - will now work for states with background calculation.
2011-09-27 Felix Wolfsteller Enable auto-scaling axis for waterlevels in WDifference-plots.
2011-09-27 Felix Wolfsteller In W-Difference-calculation, respect indices of selected facets.
2011-09-27 Sascha L. Teichmann flys/issue317: Removed dependency from cross section demo app.
2011-09-27 Ingo Weinzierl Improved Facet creation for floodmaps - WSPLGEN and barriers Facets are only created if the calculation was successful.
2011-09-27 Ingo Weinzierl Improved WSPLGEN start to suppress inconsistent Artifact states.
2011-09-27 Ingo Weinzierl Improved regex used to track WSPLGEN errors - will now match critical errors as well.
2011-09-27 Sascha L. Teichmann Fixed whitespace usage in ChangeLog.
2011-09-27 Sascha L. Teichmann Removed superfluous imports
2011-09-27 Ingo Weinzierl Bugfix: #68 Set number format of chart plot axes based on the CallMeta instance for each request.
2011-09-27 Sascha L. Teichmann Cache: Increased number of cached annotations.
2011-09-27 Felix Wolfsteller Let WDifferences-diagram show more than one difference, if asked to.
2011-09-27 Ingo Weinzierl Bugfix: #320 Substitue '../' in shapefile directories.
2011-09-26 Ingo Weinzierl The extent of the WSPLGEN facets are now determined by the extent of the start and end CrossSectionTrack of the WSPLGEN calculation.
2011-09-26 Felix Wolfsteller Improved w-differences diagram generation with included 'absolute' values.
2011-09-26 Felix Wolfsteller Add positional-conflict-awareness when merging Facets in attribute
2011-09-26 Ingo Weinzierl Bugfix: #296 Set i18n titles for WSPLGEN and barriers WMS layers.
2011-09-26 Felix Wolfsteller Fix getPosition() in ManagedDomFacet.
2011-09-23 Felix Wolfsteller Squash a bug about wrongly named position attribute ('pos' vs 'art:pos').
2011-09-23 Felix Wolfsteller Minor refactoring, documentation.
2011-09-23 Felix Wolfsteller Added documentation.
2011-09-22 Ingo Weinzierl Made MetaDataService a subclass of FLYSService.
2011-09-22 Bjoern Schilberg Full blown mosel wms mapfile.
2011-09-22 Ingo Weinzierl Improved database session handling in services and artifacts.
2011-09-22 Ingo Weinzierl Improved bounds validation for distance only states.
2011-09-21 Felix Wolfsteller Added WaterlevelArtifact and respective infrastructure.
2011-09-21 Felix Wolfsteller Cosmetics, docs.
2011-09-21 Felix Wolfsteller Let WDifferencesCurveGenerator process LONGITUDINAL_W facets.
2011-09-21 Felix Wolfsteller Preparations for ability to display multiple differences in one plot.
2011-09-21 Ingo Weinzierl #315 Added new state for entering a kilometer range without step width.
2011-09-21 Felix Wolfsteller Cosmetics.
2011-09-21 Felix Wolfsteller Guard access to dataset to avoid NullPointerException.
2011-09-21 Ingo Weinzierl #325 Create human readable label for the selected DEM (used in the static UI part).
2011-09-19 Ingo Weinzierl Tagged RELEASE 2.5 of flys-artifacts.
2012-02-09 Felix Wolfsteller Fix flys/issue481 (i18n: Datenkorb).
2012-02-09 Raimund Renkert Reactivated the Enterprise Blue theme. Fixes some icon and image issues in IE8.
2012-02-09 Felix Wolfsteller Cosmetics.
2012-02-09 Felix Wolfsteller Allow selection of multiple locations with mouse in MultipleLocationPanel.
2012-02-09 Felix Wolfsteller Added utility functions for double arrays.
2012-02-09 Felix Wolfsteller Translate data item in locationpanel label.
2012-02-09 Felix Wolfsteller Added translations for reference curve state data.
2012-02-08 Felix Wolfsteller Cosmetics.
2012-02-08 Felix Wolfsteller Added new UIProvider to enter mutliple locations (yet only input view textfield possible).
2012-02-08 Felix Wolfsteller Added missing translation for waterlevels.
2012-02-08 Felix Wolfsteller Cosmetics.
2012-02-08 Sascha L. Teichmann Error report: Prefix error message for a certain km with 'KM'.
2012-02-08 Ingo Weinzierl Added missing translation string used in the datacage window.
2012-02-08 Felix Wolfsteller Added Change accidentally ommitted to commit in rev 3960.
2012-02-08 Ingo Weinzierl #482 Display i18n messages for validation errors in range panel.
2012-02-08 Felix Wolfsteller Partial fix for flys/issue471, add context menu to manual point themes.
2012-02-07 Raimund Renkert Issue 473.
2012-02-07 Ingo Weinzierl Reverted port of artifact-server 8182 to 8181.
2012-02-06 Raimund Renkert Added helper input table to state 'timerange' input in hist. discharge curves.
2012-02-06 Felix Wolfsteller Added i18n for reference curve export.
2012-02-06 Raimund Renkert Added service to request discharge infos at a specific gauge.
2012-02-06 Sascha L. Teichmann I18N for "Reduzierte Bezugslinie".
2012-02-06 Ingo Weinzierl Distinguish between numbers and dates while parsing chart info documents; the MousePosition panel now displays the position on date axes correctly.
2012-02-06 Ingo Weinzierl Save zoom parameters as Number; added new Axis types NumberAxis and DateAxis.
2012-02-06 Ingo Weinzierl Added i18n strings for the export button of historical discharge curves.
2012-02-03 Ingo Weinzierl Display inserted W/Q values in WQSimpleArrayPanel.
2012-02-03 Sascha L. Teichmann Removed superfluous imports.
2012-02-03 Felix Wolfsteller Adjusted to be able to feed data to reference curves.
2012-02-03 Felix Wolfsteller Added TODO and handle dynamic data of unknown type.
2012-02-03 Felix Wolfsteller Refactored.
2012-02-02 Felix Wolfsteller Refactoring to ease code-reuse.
2012-02-02 Felix Wolfsteller Removed obsolete import.
2012-02-02 Felix Wolfsteller Removed obsolete imports.
2012-02-02 Raimund Renkert Issue 466.
2012-02-02 Felix Wolfsteller Cosmetics.
2012-02-01 Felix Wolfsteller Cosmetics.
2012-02-01 Felix Wolfsteller Added accidentally ommitted ChangeLog entry.
2012-02-01 Felix Wolfsteller Added i18n title for reference curve output.
2012-02-01 Ingo Weinzierl Added i18n title for 'historical discharge curve' output.
2012-02-01 Felix Wolfsteller Changed wording for W bei/fuer ungl.Abflsgs.
2012-02-01 Ingo Weinzierl #469 Use correct I18N string to display inserted locations in LocationDistancePanel.
2012-02-01 Felix Wolfsteller javadoc
2012-02-01 Felix Wolfsteller Avoid certain npes.
2012-01-31 Ingo Weinzierl Create a better label in IntegerRangeData for the selected item.
2012-01-31 Ingo Weinzierl Implemented WQSimpleArrayPanel.createOld().
2012-01-31 Ingo Weinzierl Added further methods to DataFactory to create concrete Data instances.
2012-01-31 Felix Wolfsteller Fix strange javascript side effects.
2012-01-31 Felix Wolfsteller Improved spinner-behaviour in cross section km control.
2012-01-31 Felix Wolfsteller Slightly improved Spinner- behaviour in CrossSectionControl, but regress in other case.
2012-01-31 Ingo Weinzierl Introduced a DataFactory that should be used to create new Data instances.
2012-01-30 Raimund Renkert Adjusted table height to fill the window.
2012-01-30 Raimund Renkert Get the axes name from collection settings and use them as table header.
2012-01-30 Felix Wolfsteller Handle manual points on a per-chart(type) basis.
2012-01-30 Raimund Renkert Show hit count in filtered input helper tables.
2012-01-30 Ingo Weinzierl Initialize the min and max fields in RangePanel.
2012-01-30 Felix Wolfsteller Improved form validation.
2012-01-30 Felix Wolfsteller Make manual Points active by default.
2012-01-27 Felix Wolfsteller Added dummy handling for new boolean property of each point.
2012-01-27 Felix Wolfsteller Added basic validation, improved editing function, minor refac.
2012-01-27 Felix Wolfsteller Made manual points edit- and removable.
2012-01-27 Felix Wolfsteller Cosmetics.
2012-01-27 Felix Wolfsteller Added translateable context menu to open manual point editor from themepanel.
2012-01-27 Felix Wolfsteller Fix i18n issues.
2012-01-27 Felix Wolfsteller Invested 2 seconds after losing 3.
2012-01-27 Ingo Weinzierl First step to implement WQSimpleArrayPanel.createOld().
2012-01-27 Felix Wolfsteller Refactored Collection reference out of Panels.
2012-01-27 Ingo Weinzierl Implemented the createOld() method in RangePanel.
2012-01-27 Felix Wolfsteller Improved points UI to also respect language and name of point.
2012-01-27 Felix Wolfsteller Added translations for manual points related words.
2012-01-27 Felix Wolfsteller Display edited manual points next time the point editor is opened.
2012-01-27 Felix Wolfsteller Cosmetics, docs.
2012-01-27 Felix Wolfsteller Let ManualPointEditor use RedrawRequests to let freshly edited points show up in Chart.
2012-01-27 Felix Wolfsteller Cosmetics, removed obsolete imports.
2012-01-27 Felix Wolfsteller Cosmetics.
2012-01-26 Raimund Renkert Issue 138.
2012-01-26 Felix Wolfsteller Added basic UI to enter manual points.
2012-01-26 Felix Wolfsteller Opened Collection interface in preparation of Manual Points-Feature.
2012-01-26 Felix Wolfsteller Cosmetics, doc.
2012-01-25 Raimund Renkert Issue 265.
2012-01-25 Felix Wolfsteller Fixed typo, more stub for add points ui.
2012-01-25 Felix Wolfsteller Minor refactoring.
2012-01-24 Raimund Renkert Suppress onCollectionChange event if an artifact is added to the collection
2012-01-24 Raimund Renkert Added filter implementation for input helper tables in single location and
2012-01-24 Raimund Renkert Added filter criterion and clear filter on tab selection changed and input mode
2012-01-24 Raimund Renkert Filter the helper input tables using the range filter.
2012-01-23 Sascha L. Teichmann Added UI for "Bezugslinienverfahren" ("W auf freier Strecke").
2012-01-23 Raimund Renkert Added UI parts and event for filtering distances and locations.
2012-01-20 Raimund Renkert Add cross sections loaded from datacage to the master artifacts list.
2012-01-20 Felix Wolfsteller Fix typo for i18n key, flys/issue458.
2012-01-20 Raimund Renkert Set the empty facet to invisible.
2012-01-20 Raimund Renkert Added new artifact to be able to open existing 'new chart' projects.
2012-01-19 Ingo Weinzierl Removed useless imports.
2012-01-19 Ingo Weinzierl Added a new widget to simply insert a WQ mode and values as array.
2012-01-19 Ingo Weinzierl Added new Data classes for integer array and integer options.
2012-01-19 Raimund Renkert Read river from artifact description in state.chart.river to be able
2012-01-19 Raimund Renkert Set the collection if all recommended artifacts are loaded or the
2012-01-18 Ingo Weinzierl Improved the code of IntegerRangePanel: it now returns the inserted values as IntegerRangeData object.
2012-01-18 Ingo Weinzierl Added new panels for inserting ranges, int ranges and time (year) ranges.
2012-01-18 Ingo Weinzierl Added a new Data type IntegerRangeData that stores min and max integer values.
2012-01-16 Ingo Weinzierl Repaired broken MapArtifact creation.
2012-01-13 Raimund Renkert Changed internal string for new chart module.
2012-01-13 Felix Wolfsteller Implemented synchronous navigation through cross section profiles.
2012-01-13 Felix Wolfsteller Added feedMany() implementation to feed-service.
2012-01-13 Felix Wolfsteller Cosmetics.
2012-01-12 Raimund Renkert Changed the visible i18n strings for module 'new map.'
2012-01-12 Raimund Renkert Issue451.
2012-01-12 Felix Wolfsteller Partial flys/issue441.
2012-01-12 Raimund Renkert Added new artifact 'MapArtifact' for module 'new map'. This allows to open an
2012-01-12 Raimund Renkert Issue451.
2012-01-11 Felix Wolfsteller Added translation for Streckenfavoriten.
2012-01-11 Raimund Renkert Updated the MapOutputService to be able to request the new output type 'map'.
2012-01-11 Raimund Renkert Issue 435
2012-01-11 Raimund Renkert Fixed initial boolean value setting.
2012-01-11 Raimund Renkert Improved validation and property handling.
2012-01-09 Raimund Renkert Issue 358.
2012-01-09 Raimund Renkert Fixed initial values of boolean properties.
2012-01-09 Raimund Renkert Implemented the validators more object oriented.
2012-01-09 Raimund Renkert Issue 433.
2012-01-09 Raimund Renkert Issue 358.
2012-01-09 Raimund Renkert Issue 358.
2012-01-09 Raimund Renkert Issue 358.
2012-01-06 Felix Wolfsteller Avoid NPE in StyleEditorWindow.
2012-01-06 Ingo Weinzierl #196 Localize numbers in W/Q/D tables.
2012-01-06 Felix Wolfsteller Added translations for flood_protections keyword.
2012-01-05 Felix Wolfsteller Changed CrossSection spinner-stepsize, adjusted km- and mastersetting.
2012-01-04 Ingo Weinzierl Improved the StyledEditorWindow to support a list of pointsizes.
2012-01-04 Ingo Weinzierl Added new strings for the theme editor.
2012-01-04 Ingo Weinzierl Removed unused method calls.
2012-01-04 Ingo Weinzierl Added new strings displayed in the theme editor window.
2012-01-03 Ingo Weinzierl Modified width of DoubleRangePanel in LocationDistancePanel.
2012-01-03 Ingo Weinzierl #302 Improved input validation in WQ panels.
2012-01-03 Felix Wolfsteller Added and fixed translations of theme style properties.
2012-01-02 Ingo Weinzierl #431 Added support for WMS 1.3.0 projection definitions.
2012-01-02 Ingo Weinzierl Improved CapabilitiesParser to test WMS using its main() method.
2012-01-02 Ingo Weinzierl Improved the TableDataPanel (for displaying calculation results) to support CSV exports with more than 5 columns.
2011-12-29 Ingo Weinzierl Made WQInputPanel able to distinguish between a 'Q at Gauge' and 'Free Q'.
2011-12-27 Ingo Weinzierl Set the chart export size to -1, so that the FLYS server is able to distinguish between an export and the query to display a chart.
2011-12-27 Ingo Weinzierl Added strings for chart properties dialog.
2011-12-23 Raimund Renkert Update chart if properties are changed successfully.
2011-12-23 Raimund Renkert Modified icon background to transparent.
2011-12-23 Ingo Weinzierl Skip empty lines in CSV service.
2011-12-22 Raimund Renkert Issue 427.
2011-12-22 Raimund Renkert Save output settings in chart properties dialog.
2011-12-22 Ingo Weinzierl Improved the CSVExportService to ignore lines that begin with a '#' character.
2011-12-22 Felix Wolfsteller Uncommented some code paths to avoid unwanted side effects, cosmetics.
2011-12-22 Felix Wolfsteller Improvements in CrossSectionChartThemePanel.
2011-12-22 Felix Wolfsteller Refactored, set collectionview in Themepanels constructors.
2011-12-22 Felix Wolfsteller Added convenient accessor.
2011-12-22 Felix Wolfsteller Tell master-artifact of collection when cross-section-master changed kilometer.
2011-12-22 Felix Wolfsteller Introduce ColletionView to all ChartPanel types.
2011-12-21 Felix Wolfsteller Cosmetics, refactoring, renamed Master to CSMaster to avoid confusion.
2011-12-21 Felix Wolfsteller Fix over axis menu item, added standalone 'over axis' menu item.
2011-12-21 Raimund Renkert Added style for properties dialog axis tab.
2011-12-21 Raimund Renkert Changed i18n strings.
2011-12-21 Raimund Renkert Added properties dialog icon.
2011-12-21 Raimund Renkert Create the properties dialog content dynamically based on the properties read
2011-12-20 Raimund Renkert Extract and parse the output settings from describe document and add settings
2011-12-20 Raimund Renkert Removed code for UI generation. SmartGWT classes are not usable on
2011-12-20 Felix Wolfsteller Feed new parameter to area artifact, fix reversed assignment of under/over curves.
2011-12-20 Raimund Renkert Added new classes for output setting types.
2011-12-20 Felix Wolfsteller Allow other.wkms facets to be created areas with.
2011-12-20 Ingo Weinzierl Adapted the seperator character between Ws and Qs in DESCRIBE documents which has changed in the flys-artifacts.
2011-12-20 Felix Wolfsteller Removed obsolete imports.
2011-12-20 Felix Wolfsteller Refactored to use existing code.
2011-12-20 Felix Wolfsteller Have 'area' context menu in Longitudinal-Section diagrams themepanels, too.
2011-12-20 Felix Wolfsteller Added keys and translations for area-creation related words.
2011-12-20 Ingo Weinzierl Bugfix: split up the Ws and Qs in the WQInputPanel properly.
2011-12-20 Felix Wolfsteller Cosmetics.
2011-12-20 Felix Wolfsteller Improved area creation GUI.
2011-12-19 Felix Wolfsteller Restore feature that was optimized away by last commit.
2011-12-19 Felix Wolfsteller Minor refactoring to ease addition of new style-fields (are now added automically).
2011-12-19 Ingo Weinzierl Removed unused imports.
2011-12-19 Ingo Weinzierl #409 Made layer list and map layers synchron.
2011-12-19 Ingo Weinzierl Bugfix: make sure that the user has selected a DEM before feeding the Artifact with it.
2011-12-19 Ingo Weinzierl Added error strings for DEM selection.
2011-12-19 Felix Wolfsteller Bugfixing and feature-adding for cross-sections/areas.
2011-12-16 Felix Wolfsteller Area creation UI update.
2011-12-16 Felix Wolfsteller Added method to create a menuitem separator.
2011-12-16 Felix Wolfsteller Cosmetics, doc.
2011-12-15 Raimund Renkert Fixed return type in UI factory method.
2011-12-15 Raimund Renkert Added missing interface.
2011-12-15 Raimund Renkert Added interfaces and container for output settings.
2011-12-13 Felix Wolfsteller Minor refactoring and fix initial settings when creating ui.
2011-12-13 Felix Wolfsteller Fix ThemeList.toMaps
2011-12-13 Felix Wolfsteller Client side of interactive cross section diagrams.
2011-12-13 Felix Wolfsteller Allow client to access artifacts data via CollectionItems and Themes.
2011-12-13 Felix Wolfsteller Fix crosssectionkmservice.
2011-12-12 Ingo Weinzierl Added a label that displays the current map projection to the MapToolbar.
2011-12-12 Ingo Weinzierl Added a cancel button to the LoadingPanel which stops running WSPLGEN calculations (realized by returning to the previous state).
2011-12-12 Raimund Renkert Added property fields to the chart properties editor dialog.
2011-12-12 Felix Wolfsteller Cosmetics.
2011-12-09 Raimund Renkert Added stub for chart property editor.
2011-12-09 Raimund Renkert Issue 377.
2011-12-08 Felix Wolfsteller Registered CrossSectionKMService/client/servlet in web.xml .
2011-12-08 Felix Wolfsteller Added client for CrossSectionKMService.
2011-12-08 Raimund Renkert Removed the URL parameter from service calls. The service
2011-12-08 Felix Wolfsteller Fixed typo in German translation.
2011-12-08 Ingo Weinzierl Bugfix: set correct label for 'waterlevel/ground' state.
2011-12-08 Ingo Weinzierl #421 Ask the user before removing themes from chart or map.
2011-12-06 Ingo Weinzierl Reorder the map themes at the end of the layer initialization to be in sync with the map theme panel.
2011-12-05 Ingo Weinzierl Added missing i18n labels for buttons used in ExternalWMSWindow.
2011-11-28 Ingo Weinzierl Display only information in CapabilitiesPanel that really exist.
2011-11-28 Ingo Weinzierl The WMSLayerTree displays WMS layers that support a given SRS only.
2011-11-28 Ingo Weinzierl Moved code to parse WMS Capabilities to an own class 'CapabilitiesParser' and added code to parse SRS definitions.
2011-11-23 Ingo Weinzierl Improved parsing of Capabilities document - parse '/WMT_MS_Capabilities' as well.
2011-11-22 Ingo Weinzierl Triggered the reload of MapThemePanel after adding external WMS layers.
2011-11-22 Ingo Weinzierl Create new Artifacts for selected WMS layers of the ExternalWMSWindow.
2011-11-22 Ingo Weinzierl Refactored the LoadArtifactService a bit.
2011-11-22 Ingo Weinzierl Added code to trigger loading selected WMS layers from ExternalWMSWindow. Note: no code for loading/adding layers to the current map existing yet.
2011-11-21 Ingo Weinzierl Parse and display WMS layers supported by a user specified WMS service.
2011-11-21 Ingo Weinzierl Introduced i18n in the ExternalWMSWindow.
2011-11-21 Ingo Weinzierl Read and display all FLYS relevant information of Capabilities documents.
2011-11-21 Ingo Weinzierl Added a service that loads the Capabilities of a specified WMS - display those information in the ExternalWMSWindow.
2011-11-21 Ingo Weinzierl Replaced icon (addWMS.png) with the same icon but with transparent background.
2011-11-18 Ingo Weinzierl Added an initial control that allows (when it is finished) adding map layers from external WMS.
2011-11-18 Ingo Weinzierl Removed needless imports.
2011-11-18 Ingo Weinzierl Query GetFeatureInfo with layers defined in MapThemePanel - which are the real layers in the map.
2011-11-18 Ingo Weinzierl Repaired broken WMS layer controls in map theme panel.
2011-11-18 Ingo Weinzierl Parse GetFeatureInfo response on our own and display resulting FeatureInfo objects in the GetFeatureInfoWindow.
2011-11-17 Ingo Weinzierl Removed needless imports.
2011-11-17 Ingo Weinzierl Added an initial GetFeatureInfo tool to get information about points in the map.
2011-11-17 Raimund Renkert Issue312.
2011-11-14 Ingo Weinzierl Added a ScaleLine to the map.
2011-11-11 Ingo Weinzierl Update the map when receiving a RedrawRequestEvent.
2011-11-11 Ingo Weinzierl Removed needless imports.
2011-11-11 Ingo Weinzierl Added i18n strings used in datacage's floodmap section.
2011-11-10 Raimund Renkert Issue 339.
2011-11-10 Raimund Renkert Issue 338.
2011-11-10 Felix Wolfsteller Fix clone of static artifacts for differences.
2011-11-10 Raimund Renkert Issue 355.
2011-11-10 Raimund Renkert Issue 342.
2011-11-09 Raimund Renkert Issue 265.
2011-11-09 Raimund Renkert Expand the map selection section in helper panel on project start.
2011-11-08 Ingo Weinzierl Set attribute 'ld_mode' in appropiate UIProviders.
2011-11-08 Raimund Renkert Issue 294.
2011-11-04 Felix Wolfsteller Updated translations (english and defaut (english)).
2011-11-04 Ingo Weinzierl Bugfix: added missing i18n strings and synced english translation with default translation.
2011-11-04 Felix Wolfsteller Added translations for datacage element strings.
2011-11-03 Ingo Weinzierl Update map and theme panel when new layers are added via datacage or removed by context menu.
2011-11-01 Raimund Renkert Updated the theme editor window layout.
2011-11-01 Raimund Renkert Issue 400.
2011-11-01 Felix Wolfsteller Cosmetics, refactoring.
2011-11-01 Felix Wolfsteller Fix flys/issue306 (CrossSections: Remove table header context menu).
2011-10-31 Ingo Weinzierl Added a 'zoom to layer' menu item to the map theme panel which triggers a zoom to the specific layer/theme.
2011-10-28 Ingo Weinzierl Call Collection.doOut to retrieve a map config and use this config to build up an OpenLayers map.
2011-10-26 Felix Wolfsteller Corrected ChangeLog syntax for older entries.
2011-10-26 Felix Wolfsteller Let Datacage from toolbar show 'static' parts of data.
2011-10-26 Felix Wolfsteller Added accidentially ommitted ChangeLog entry.
2011-10-26 Ingo Weinzierl Added a environment variable that might be used to use an alternative log4j properties file.
2011-10-26 Ingo Weinzierl Ignore log4j.properties.
2011-10-25 Ingo Weinzierl Made the URL of Artifact server available via ServletContext parameter.
2011-10-25 Raimund Renkert Issue 118/203.
2011-10-25 Ingo Weinzierl Replaced stdout and stderr logging with log4j loggers in server classes.
2011-10-25 Ingo Weinzierl Replaced stdout and stderr logging with log4j loggers in server classes.
2011-10-25 Ingo Weinzierl Added a BaseServlet that is used to setup config things like log4j.
2011-10-25 Ingo Weinzierl First step of refactoring the map creation - implemented a MapOutputService.
2011-10-24 Ingo Weinzierl Display the datacage button in the map toolbar.
2011-10-24 Felix Wolfsteller Fix flys/issue390 (W-Diff: Icon zum Löschen anpassen).
2011-10-24 Felix Wolfsteller In removeFeature-icon made white background transparent.
2011-10-21 Ingo Weinzierl Bugfix: #352 Keep grid selection in theme panels alive after themes has been modified.
2011-10-21 Raimund Renkert Renamed 'textbackground' to 'backgroundcolor'.
2011-10-20 Raimund Renkert Display new attributes in editor window.
2011-10-20 Raimund Renkert Moved the context menu handler to constructor to have the menu
2011-10-20 Raimund Renkert Reordered the attribute list.
2011-10-20 Sascha L. Teichmann Removed superfluous imports.
2011-10-19 Ingo Weinzierl Display selected WQ values in single rows - named main values need a lot of space.
2011-10-19 Raimund Renkert Group the theme attributes.
2011-10-19 Raimund Renkert Convert all color attributes from html to rgb notation.
2011-10-19 Felix Wolfsteller In WDiff datacage input make names survive backjumps.
2011-10-19 Ingo Weinzierl Add the format (png, pdf, svg) string into the xml document which is used for querying charts.
2011-10-19 Ingo Weinzierl Removed string which has been commited by mistake.
2011-10-18 Felix Wolfsteller Allow (yet limited) usage of zus and flood-protection data in wdiffs.
2011-10-18 Raimund Renkert Prepared editor UI for annotation styling.
2011-10-18 Felix Wolfsteller Minor cosmetics.
2011-10-18 Felix Wolfsteller Allowed to load Artifacts with different factories in one go.
2011-10-18 Raimund Renkert Added documentation.
2011-10-17 Ingo Weinzierl Added icons to export chart as PNG, PDF and SVG to the ChartToolbar.
2011-10-17 Ingo Weinzierl Added a ImgLink class which creates an html link with an image.
2011-10-17 Ingo Weinzierl Bugfix: adjusted method call which avoided compiling flys-client.
2011-10-17 Raimund Renkert Use images for line type and line size selection.
2011-10-17 Ingo Weinzierl #253 Implemented ThemePanel's 'remove' action.
2011-10-17 Raimund Renkert Added new values for line type to theme editor.
2011-10-17 Raimund Renkert Set window position to page center.
2011-10-17 Raimund Renkert Show theme name in static text field.
2011-10-17 Raimund Renkert Request redraw on style attribute change.
2011-10-17 Felix Wolfsteller Removed incorrect ChangeLog entry.
2011-10-17 Felix Wolfsteller Added ommitted ChangeLog entries for flys-client.
2011-10-17 Felix Wolfsteller Cosmetics, docs.
2011-10-17 Felix Wolfsteller Donate own error for failcase of remove-artifact.
2011-10-17 Ingo Weinzierl #366 Modifications on theme description in theme panels are now persisted to artifact server.
2011-10-14 Ingo Weinzierl Added missing string resources for datacage.
2011-10-14 Raimund Renkert Set the correct index when saving changed attributes.
2011-10-14 Ingo Weinzierl Added missing MapUtils class from last commit.
2011-10-14 Ingo Weinzierl #288 Added legend symbols to the MapThemePanel.
2011-10-14 Raimund Renkert Use the theme index to identify the correct style.
2011-10-13 Sascha L. Teichmann Introduced i18n for datacage
2011-10-13 Felix Wolfsteller Donated own error message to RemoveArtifact failure case.
2011-10-13 Ingo Weinzierl Replaced elevation control icon with a new version with transparent background.
2011-10-13 Felix Wolfsteller Removed obsolete imports.
2011-10-13 Felix Wolfsteller Remove Artifacts not needed anymore when reparameterizing w-diffs.
2011-10-13 Felix Wolfsteller Added removeArtifact CollectionHelper method.
2011-10-13 Felix Wolfsteller Added RemoveArtifactService.
2011-10-13 Felix Wolfsteller Cosmetics, docs.
2011-10-13 Ingo Weinzierl Improved error handling while using the elevation control - Make selected features in the map visible.
2011-10-13 Sascha L. Teichmann Updated SmartGWT to 2.5
2011-10-13 Ingo Weinzierl #297 Implemented a window to adjust elevations of geometries in the map.
2011-10-12 Felix Wolfsteller Validate selection of pairs in wdiff, show error(s) if invalid.
2011-10-12 Ingo Weinzierl #331 Load OpenLayers-2.11 library from local maschine instead from remote repository.
2011-10-12 Ingo Weinzierl Corrected ChangeLog entry of last commit - worked in that rev on #293; NOT on #288.
2011-10-12 Ingo Weinzierl #288 Added icons to the barriers combobox for digitizing features.
2011-10-12 Ingo Weinzierl Improved exception handling while fetching theme styles.
2011-10-12 Ingo Weinzierl Refactored the code to create a context menu and a style editor so that it is also available for maps.
2011-10-12 Felix Wolfsteller Show only Ws in datacage for w-diffs.
2011-10-12 Felix Wolfsteller Partial fix for flys/issue304 (Erweiterte Funktionen W-Differenzen).
2011-10-11 Ingo Weinzierl #300 Synchronized the ThemePanel's layer order with the internal order of the Map.
2011-10-11 Felix Wolfsteller Fix 'incorrect minuend/subtrahend order' bug in wdiff calculation.
2011-10-11 Felix Wolfsteller Allow reparameterization of W-Diffs.
2011-10-11 Ingo Weinzierl Added the option for the MapThemePanel to listen to Theme move events.
2011-10-10 Ingo Weinzierl Bumped OpenLayers to version 2.11 and GWT-OpenLayers to version 0.6
2011-10-10 Felix Wolfsteller Removed obsolete imports.
2011-10-10 Ingo Weinzierl Bugfix: #289 Display measured areas in 'ha'.
2011-10-10 Felix Wolfsteller Cosmetics (docs).
2011-10-10 Felix Wolfsteller Minor refactoring, improved displayed Strings in W-Diff branch.
2011-10-10 Ingo Weinzierl Bugfix: #375 Limit the number of fractions in the result of the measure controls (in the map).
2011-10-10 Felix Wolfsteller Cosmetics.
2011-10-10 Ingo Weinzierl Removed superfluous imports.
2011-10-10 Ingo Weinzierl Bugfix: #326 Made the process of opening existing project more robust if the collection has no artifact set.
2011-10-07 Ingo Weinzierl Bugfix: #233 Redraw computation table if no data was retrieved to display an error message immediatly.
2011-10-05 Raimund Renkert Edited item attributes are saved and send to the server on accept.
2011-10-05 Raimund Renkert New methods for color transformation (html to rgb; rgb to html).
2011-10-04 Raimund Renkert Build up the editor window from CollectionItemAttribute response.
2011-10-04 Ingo Weinzierl Improved error handling if no calculation result data was found.
2011-09-30 Ingo Weinzierl Bugfix: #357 Removed header title of selection column.
2011-09-30 Raimund Renkert Added skeleton for editor window.
2011-09-30 Raimund Renkert Added context menu to themes list.
2011-09-30 Raimund Renkert Added new service and model for collection item attributes.
2011-09-30 Felix Wolfsteller Fix messed up indentation.
2011-09-30 Felix Wolfsteller Neaten certain GUI aspects with W-Diff waterlevel-pair selection.
2011-09-29 Ingo Weinzierl Bugfix: #179 Repaired broken zoom-out-by-factor function for charts.
2011-09-29 Ingo Weinzierl Re-added the function to zoom-out charts by a given factor (10%).
2011-09-29 Ingo Weinzierl Bugfix: #179 and #198 Zoom-out will no longer work with a factor but with stacked chart extents.
2011-09-29 Ingo Weinzierl Bugfix: #336 Improved determination of min/max KM values - code moved to ArtifactDescription.
2011-09-28 Ingo Weinzierl Bugfix: #328 The datacage used for waterlevel selection now fetches W facets (waterlevels) only.
2011-09-28 Ingo Weinzierl Bugfix: #211 Reset values of km range mode if single km mode is selected and the other way arround.
2011-09-28 Ingo Weinzierl Bugfix: #119 Display min/max values for WQ ranges if input validation failed.
2011-09-28 Ingo Weinzierl Bugfix: #111 Reset the values of WQ range mode if single mode is selected and the other way arround.
2011-09-28 Felix Wolfsteller Make differences (rows of list) in wdiff-gui removable.
2011-09-27 Felix Wolfsteller Avoid duplicate clones in w-diff branch by using a set instead of a list.
2011-09-27 Felix Wolfsteller Cosmetics, documentation.
2011-09-27 Felix Wolfsteller Implement equals und hashCode for Recommendation and associates.
2011-09-27 Ingo Weinzierl Bugfix: #321 Refresh the parameter list after a calculation is finished.
2011-09-26 Ingo Weinzierl Bugfix: #298 Floodmaps initial zoom is determined by the WSPLGEN layer's extent.
2011-09-26 Ingo Weinzierl Force a single selection in the datacage widget for DEMs and WSPs.
2011-09-26 Ingo Weinzierl Bugfix: #323 A double click in the datacage widget triggers the DatacageDoubleClickHandler.onDoubleClick() method of all registered handlers.
2011-09-21 Felix Wolfsteller Employ waterlevelfactory when cloning artifacts for WDifferences-Subtrahend/Minuend-artifacts.
2011-09-21 Ingo Weinzierl #315 Added a new UIProvider for range selection in floodmaps.
2011-09-19 Hans Plum News 2.5.0 added for completeness
2011-09-19 Hans Plum News 2.4.0 added for completeness
2011-09-19 Ingo Weinzierl Tagged RELEASE 2.5 of flys-client.
2011-09-19 Ingo Weinzierl Cleaned imports.
2011-09-19 Ingo Weinzierl DemDatacagePanel now returns the database ID of the selected DEM.
2012-09-28 Thomas Arendsen Hein merged flys-backend/2.5 2.5
2011-09-19 Ingo Weinzierl Tagged RELEASE 2.5 of flys-backend.
2011-09-16 Ingo Weinzierl Added a function to query a DGM by Id.
2011-09-15 Bjoern Schilberg Removed oracle dependency.
2011-09-15 Bjoern Schilberg Added inital oracle schema.
2011-09-14 Bjoern Schilberg Added inital oracle-spatial_idx.sql script.
2011-09-14 Bjoern Schilberg Deactivated spatial indexes.
2011-09-14 Bjoern Schilberg Added inital oracle_create_user.sql script.
2011-09-14 Bjoern Schilberg Added schema floodplain.
2011-09-14 Bjoern Schilberg Added schema hws.
2011-09-14 Bjoern Schilberg Added schema cross_section_tracks.
2011-09-14 Bjoern Schilberg Added schema river_axes.
2011-09-14 Bjoern Schilberg Added schema fixpoints.
2011-09-14 Bjoern Schilberg Added schema buildings.
2011-09-14 Bjoern Schilberg Fixed table river_axes_km.
2011-09-13 Bjoern Schilberg Initial oracle schema.
2011-09-13 Hans Plum Removed all tables for different datasets at HYdrologie/Hydr.Grenzen/Linien/*
2011-09-13 Hans Plum Removed table boundarypolys because of wrong placed dataset
2011-09-12 Bjoern Schilberg Postgresql spatial scheme extended.
2011-09-02 Ingo Weinzierl Replaced SERIALs with SEQUENCES in PostgreSQL spatial schema.
2011-09-01 Hans Plum Hint for unifying table names: dgm -> dem
2011-09-01 Hans Plum Added mappings to existing data in file system (based on river Saar); added TODOs for missing tables/mappings
2011-08-31 Ingo Weinzierl Added relation and hibernate classes for floodplains (german 'Talaue').
2011-08-31 Ingo Weinzierl Added relation and hibernate classes for DGMs.
2011-08-30 Ingo Weinzierl Added a static function that returns all CrossSectionTracks of a specific river.
2011-08-25 Ingo Weinzierl Removed FileTools that has been moved to artifacts-common module.
2011-08-25 Felix Wolfsteller Mapping and Accessors for MainValues of Gauge, by Sascha L. Teichmann.
2011-08-22 Ingo Weinzierl Reverted the default db dialect back PostgreSQL.
2011-08-22 Ingo Weinzierl Added a function in RiverAxis to retrieve the RiverAxis of a given river.
2011-08-18 Ingo Weinzierl Introduced support for FLYS spatial data.
2011-08-11 Sascha L. Teichmann Re-enabled Hibernate schema dumps.
2011-07-31 Sascha L. Teichmann Bumped Apache DBCP up to 1.4
2011-07-28 Sascha L. Teichmann Importer session: Make use of the LRU cache from artifacts common.
2011-07-19 Sascha L. Teichmann Schema: added missing key contraint on hyks table.
2011-07-18 Sascha L. Teichmann HYK Importer: Check if zone coordinates in HYKs are swapped and warn the user.
2011-07-18 Sascha L. Teichmann HYK importer: Various small fixes and some extra logging.
2011-07-18 Sascha L. Teichmann Importer: Added a central configuration to allow skipping of parsing/storing individual sub systems.
2011-07-18 Ingo Weinzierl Fixed OrderBy clause in HYKEntry.
2011-07-17 Sascha L. Teichmann Store HYK data structures to database. Needs testing.
2011-07-17 Sascha L. Teichmann Importer: Parse HYKs from importer.
2011-07-17 Sascha L. Teichmann HYKParser: Create data structures while parsing.
2011-07-17 Sascha L. Teichmann Added importer models for HYKs.
2011-07-17 Sascha L. Teichmann Schema: Fixed location of 'Peilungsjahre' in HYKs
2011-07-17 Sascha L. Teichmann Fixes for the HYK parser
2011-07-15 Sascha L. Teichmann Initial version of the HYK parser. Not ready, yet.
2011-07-15 Sascha L. Teichmann Schema: Argh! Added distance_{vl|hf|vr} to
2011-07-15 Sascha L. Teichmann Added method
2011-07-15 Sascha L. Teichmann Schema: Added missing columns in HYK tables.
2011-07-15 Sascha L. Teichmann Moved file parsers to separate package.
2011-07-15 Sascha L. Teichmann New. The hibernate models
2011-07-15 Sascha L. Teichmann schema: Added structures for HYKs "Hydraulische Kenngroessen"
2011-07-13 Sascha L. Teichmann Bumped Hibernate up to 3.6.5
2011-07-11 Sascha L. Teichmann HashedFile: Forget to call the file hashing so only the file lengths were compared.
2011-07-11 Sascha L. Teichmann Prevent parsing and storing PRF duplicates.
2011-07-08 Sascha L. Teichmann Made import of cross sections work.
2011-07-07 Sascha L. Teichmann Integrated PRF parsing into importer. Needs testing!
2011-07-07 Sascha L. Teichmann Querprofile: Added a table to map the points to a given km.
2011-07-07 Sascha L. Teichmann Schema: Added description column to the cross section table
2011-07-07 Sascha L. Teichmann Schema: Dropped unique constraint of x in a single line of a "Querprofil-Spur".
2011-07-07 Sascha L. Teichmann PRFParser: Added a callback to be called from parsePRFs() if
2011-07-07 Sascha L. Teichmann PRFParser: Extract the year of sounding and description from file names.
2011-07-07 Sascha L. Teichmann PRFParser: Extracted the data. All BfG PRFs are parsed correctly, now.
2011-07-07 Sascha L. Teichmann PRFParser: extract km from lines. TODO: extract data.
2011-07-06 Sascha L. Teichmann Added parser for PRF files. TODO: Extract data and km.
2011-07-06 Sascha L. Teichmann Removed braindead points3d table
2011-07-06 Sascha L. Teichmann Added Hibernate models for cross-sections and their points.
2011-07-06 Sascha L. Teichmann Added hibernate point3d model
2011-07-06 Sascha L. Teichmann Add relations for cross sections.
2011-06-28 Ingo Weinzierl Tagged RELEASE 2.4 of flys-backend.
2012-09-28 Thomas Arendsen Hein merged flys-artifacts/2.5
2011-09-19 Ingo Weinzierl Tagged RELEASE 2.5 of flys-artifacts.
2011-09-19 Bjoern Schilberg Adjust wms saar styling in the flys karten-archive styling.
2011-09-19 Ingo Weinzierl Cleanup imports.
2011-09-16 Ingo Weinzierl Use DGM Id in FLYSArtifact's data pool to query DGMs for floodmaps instead of querying DGMs by given range values.
2011-09-16 Ingo Weinzierl Added a DEM section to the floodmap section in the datacage configuration.
2011-09-16 Felix Wolfsteller Fix build.
2011-09-16 Felix Wolfsteller Load given artifacts for w-diff calculation.
2011-09-16 Bjoern Schilberg Added inital mapserver configuration files.
2011-09-16 Ingo Weinzierl Repaired datacage configuration. The system specific stuff is also displayed if a user-id is given.
2011-09-16 Ingo Weinzierl Write the name of the selected waterlevels (used for the floodmap) into the static DESCRIBE.
2011-09-16 Ingo Weinzierl Added state label for waterlevel selection.
2011-09-15 Ingo Weinzierl Enabled the FloodMapState to fetch waterlevel data from external Artifact.
2011-09-15 Ingo Weinzierl Removed needness import from JSON library which is not part of FLYS yet.
2011-09-15 Ingo Weinzierl Introduced the possibility for States to transform/modify input before the data is added to FLYSArtifact.
2011-09-15 Ingo Weinzierl Prepared FLYSArtifactCollection to live without Artifacts.
2011-09-15 Ingo Weinzierl Improved FLYSUtils: fetch Artifacts from ArtifactDatabase properly.
2011-09-15 Felix Wolfsteller Extended WDifferences bracnh of WINFO to have calculation in dedicated,
2011-09-14 Ingo Weinzierl Prepared the winfo artifact for floodmap calculations (now selectable in the UI).
2011-09-14 Ingo Weinzierl Bugfix: merge facets for the Collection's attribute only if the new and old facet's name and owner artifact are equal.
2011-09-14 Felix Wolfsteller Partial fix flys/issue304 (3:Display ZeroBaseline).
2011-09-14 Felix Wolfsteller Fix flys/issue310 (crosssection theme).
2011-09-13 Ingo Weinzierl Add an error message to the calculation report if an error occured while WSPLGENJob creation.
2011-09-13 Felix Wolfsteller Fix crash when StickyAxisAnnotation should be drawn without proper axis
2011-09-13 Ingo Weinzierl Improved styling (mapserver style) of WSPLGEN result shape.
2011-09-12 Ingo Weinzierl Add status message for queued WSPLGEN jobs to notify users.
2011-09-12 Ingo Weinzierl Do only create WSPLGEN and barrier facets if the WSPLGEN job has been added to the Scheduler and if there are digitized geometries existing.
2011-09-12 Felix Wolfsteller Fix build, added new DataUtil.
2011-09-12 Felix Wolfsteller Cosmetics.
2011-09-12 Felix Wolfsteller Added CSV Exporter for WDifferences.
2011-09-12 Felix Wolfsteller Cosmetics
2011-09-12 Ingo Weinzierl Suppress the GeoJSON string for the FloodMap creation to be included in the static DESCRIBE part.
2011-09-12 Ingo Weinzierl Removed needless imports.
2011-09-09 Ingo Weinzierl Write status messages and progress information of WSPLGEN Calculations into Artifact's DESCRIBE document.
2011-09-09 Felix Wolfsteller Fix flys/issue280 (boundingboxes of annotation).
2011-09-09 Felix Wolfsteller Fix flys/issue279 .
2011-09-09 Felix Wolfsteller Fix ArrayIndexOutOfBounds in certain cases.
2011-09-09 Felix Wolfsteller Fix facet name and legend of w-differences, walk over distance state, too.
2011-09-09 Felix Wolfsteller Added configuration to kick-in w-differences branch of winfo.
2011-09-09 Felix Wolfsteller Added very stubby WDifferences State/OutGenerator for WINFOArtifact.
2011-09-09 Felix Wolfsteller Implement getArtifact(uuid,context) in FLYSUtils.
2011-09-08 Ingo Weinzierl Added an Output target for WSPLGEN reports that will be available when an WSPLGEN calculation is finished.
2011-09-08 Felix Wolfsteller Cosmetics.
2011-09-08 Ingo Weinzierl Added a 'ProblemObserver' that analyses WSPLGEN's error stream for errors and warnings.
2011-09-08 Felix Wolfsteller Added translation of w_differences.
2011-09-07 Ingo Weinzierl Append an attribute 'background-processing' (can be 'true' or 'false') to the WINFOArtifact's DESCRIBE document.
2011-09-07 Ingo Weinzierl Set the river extent for WMSLayers in the FloodMapState.
2011-09-07 Felix Wolfsteller Added Themes for CrossSection diagrams.
2011-09-07 Felix Wolfsteller Display real km of shown data in crosssection-diagram.
2011-09-07 Felix Wolfsteller Fix various issues like i18n in cross section diagrams.
2011-09-07 Felix Wolfsteller Cosmetics, refactored, resolved todo.
2011-09-07 Felix Wolfsteller Fix waterline in crosssection diagram.
2011-09-07 Felix Wolfsteller Fix profile loading of cross section diagram.
2011-09-07 Felix Wolfsteller Minor cosmetics
2011-09-07 Felix Wolfsteller Cosmetics, docs.
2011-09-06 Ingo Weinzierl Added a fallback mechanism to style mapserver layers as long as the theme mechanism is not implemented for maps (as it is for charts).
2011-09-06 Ingo Weinzierl Read barrier layers from filesystem while mapfile creation and build a facet for this layer in the artifact.
2011-09-06 Raimund Renkert Added driver to database configuration for use with postgresql.
2011-09-06 Ingo Weinzierl Little mapfile template improvement.
2011-09-05 Ingo Weinzierl Create WMSLayerFacets for the WSPLGEN results after we have started a WSPLGEN job.
2011-09-05 Ingo Weinzierl Trigger the mapfile creation after WSPLGEN jobs have finished.
2011-09-05 Ingo Weinzierl Introduced a MapfileGenerator that creates Mapserver specific mapfiles based on WSPLGEN results read from filesystem.
2011-09-05 Ingo Weinzierl Some bugfixes when starting/finishing WSPLGEN jobs.
2011-09-02 Ingo Weinzierl Added infrastructure to start WSPLGEN calculations - the FloodMapState already start such calculations.
2011-09-02 Felix Wolfsteller Add CrossSectionInfoGenerator.
2011-09-01 Felix Wolfsteller Cleanups of CrossSection*.
2011-09-01 Ingo Weinzierl Set the 'typ' attribute of lines and polygons in barrier shapefiles while shapefile creation.
2011-09-01 Ingo Weinzierl Set the Z values of line and polygon barrier geometries used for WSPLGEN.
2011-09-01 Felix Wolfsteller Get real (but yet not parameterized) data to display in CrossSection.
2011-09-01 Ingo Weinzierl Close open shapefile transactions properly.
2011-09-01 Ingo Weinzierl Renamed WSPLGEN required waterlevels file to 'waterlevel.wst'.
2011-09-01 Ingo Weinzierl Write additional attributes ELEVATION and KILOMETER into crosssection track shapefiles.
2011-08-31 Ingo Weinzierl Write WSP file for WSPLGEN and add its filepath to the WSPLGEN job.
2011-08-31 Ingo Weinzierl Reordered some parameters in a FLYSArtifact method.
2011-08-31 Felix Wolfsteller Improved stub for CrossSections (including Factory and Facet).
2011-08-31 Felix Wolfsteller Cosmetics.
2011-08-31 Felix Wolfsteller Removed stray character.
2011-08-31 Felix Wolfsteller Cosmetics.
2011-08-31 Felix Wolfsteller Fix translations of Main Values Facets.
2011-08-31 Felix Wolfsteller Added dummy sceleton for Cross Sections.
2011-08-31 Ingo Weinzierl Export floodplain to shapefile and add its file path to WSPLGEN job.
2011-08-31 Ingo Weinzierl Write file path of DMGs into the WSPLGEN job while preparing WSPLGEN.
2011-08-30 Ingo Weinzierl Export riveraxis and crosssections to shapefiles for WSPLGEN.
2011-08-30 Ingo Weinzierl Use the correct SRID while reading GeoJSON barriers and writing line/polygon shapefiles.
2011-08-30 Ingo Weinzierl Write user defined barriers into a shapefile that is placed in the Artifact's directory.
2011-08-30 Ingo Weinzierl Moved code to extract the river srid defined in the global configuration into FLYSUtils.
2011-08-29 Felix Wolfsteller Use FLYSUtils.getRiver instead of WINFOArtifact.getRiver.
2011-08-29 Felix Wolfsteller Use FLYSUtils.getRiver instead of WINFOArtifact.getRiver.
2011-08-29 Felix Wolfsteller Commit accidentally omitted result of refactoring (WINFO/FLYSUtils/getRiver).
2011-08-29 Felix Wolfsteller Interpolate Q main values, generate interpolated W main values on the fly from
2011-08-29 Felix Wolfsteller Use new helper class FLYSUtils, minor refactorization.
2011-08-29 Felix Wolfsteller Refactored to use new FLYSUtils, moved getRiver-functionality inside.
2011-08-29 Felix Wolfsteller Minor cosmetics.
2011-08-26 Sascha L. Teichmann Made it Oracle compatible
2011-08-26 Ingo Weinzierl Set some WSPLGENJob parameters which are stored in FLYSArtifact in the Floodmap state.
2011-08-26 Ingo Weinzierl Refactored the code to fetch the km range/locations into a utility class.
2011-08-26 Ingo Weinzierl Added a new method to FLYSArtifact to destroy a single state (call its endOfLife).
2011-08-26 Felix Wolfsteller Cosmetics.
2011-08-26 Felix Wolfsteller Added limited themeing-support for MainValues.
2011-08-26 Ingo Weinzierl Prepare directories for WSPLGEN specific data in FloodMap state and remove those directories when State.endOfLife() is called.
2011-08-26 Felix Wolfsteller New theme-related utilities.
2011-08-26 Felix Wolfsteller Improved mainvalues rendering.
2011-08-26 Felix Wolfsteller Recommend MainValues for Computed discharge curves.
2011-08-26 Felix Wolfsteller New NamedDouble class which implements a <String,double>-pair.
2011-08-26 Ingo Weinzierl Call State.endOfLife() for all States in the Artifact when Artifact.endOfLife() is called.
2011-08-26 Felix Wolfsteller Plot "real" (respecting parameters) W and Q MainValues, yet in wrong scale.
2011-08-26 Ingo Weinzierl Call State.endOfLife() in FLYSArtifact when stepping back to a previous state.
2011-08-25 Felix Wolfsteller Enable plotting of some annotations that look like MainValues.
2011-08-25 Felix Wolfsteller Prepare StickyAxisAnnotation implementation to handle annotations at 'y' (vertical) axis.
2011-08-25 Felix Wolfsteller Minor cosmetics.
2011-08-25 Felix Wolfsteller Added MainValue-Fetching-Capabilities to MainValuesArtifact.
2011-08-25 Felix Wolfsteller Improved implementation of MainValueArtifact#MainValueFacet .
2011-08-25 Felix Wolfsteller Changed state spawning mechanism of MainValuesArtifact.
2011-08-25 Felix Wolfsteller Minor cosmetics and docs.
2011-08-25 Felix Wolfsteller Added new Mainvalues FacetType.
2011-08-24 Ingo Weinzierl Changed the way of collecting the data for the RiverAxisArtifact - use the database instead of a Master-Artifact.
2011-08-24 Ingo Weinzierl Removed needless imports.
2011-08-24 Felix Wolfsteller Added conf for factory and rule for MainValueArtifacts, missing ChangeLog entry.
2011-08-24 Felix Wolfsteller Let MainValuesArtifact have a state, outputmode and facet.
2011-08-24 Felix Wolfsteller Fix dates in ChangeLog.
2011-08-24 Felix Wolfsteller Smaller Cosmetics.
2011-08-24 Sascha L. Teichmann Datacage: Use 'ids' in user specific part, too.
2011-08-24 Sascha L. Teichmann Datacage template: s/db-ids/ids/g
2011-08-24 Felix Wolfsteller Refactored (state access) to ease future development of more trivial artifacts.
2011-08-24 Ingo Weinzierl The WMS background's facet will now also have a SRID set.
2011-08-24 Felix Wolfsteller Minor changes to stub MainValuesArtifact.
2011-08-24 Ingo Weinzierl Moved the input of user defined barriers for the floodmap to an earlier state.
2011-08-24 Ingo Weinzierl Repaired xpath expressions for wms srid and background layers that broke after the floodmap config structure changed.
2011-08-23 Ingo Weinzierl Repaired broken river wms initialization.
2011-08-23 Sascha L. Teichmann Made facets cloneable with the right type.
2011-08-23 Ingo Weinzierl Set the master artifact while output creation.
2011-08-23 Sascha L. Teichmann Made FLYS artifacts cloneable.
2011-08-23 Ingo Weinzierl Implemented a MapInfo service that returns some basic information to create maps for specific rivers.
2011-08-22 Sascha L. Teichmann Build out/facet filter from XML document passed at creation time.
2011-08-22 Sascha L. Teichmann Added optional positive filter for outs and facets.
2011-08-22 Sascha L. Teichmann Moved WINFO specific stuff from FLYS into WINFO artifact.
2011-08-22 Sascha L. Teichmann Datacage: filter by out in user specific part
2011-08-22 Ingo Weinzierl Prepared the FloodMapState to save geometries.
2011-08-19 Ingo Weinzierl The boundary (extent) for the river axis is determined based on its geometry - this extent is written into the wms facet.
2011-08-19 Sascha L. Teichmann Removed superfluous imports.
2011-08-19 Sascha L. Teichmann State engine: Removed CallContext from state validation.
2011-08-19 Felix Wolfsteller Added lacalization of "Streckenfavoriten".
2011-08-19 Felix Wolfsteller Picky white-space cosmetics.
2011-08-19 Felix Wolfsteller Added stub implementation of new MainValuesArtifact.
2011-08-19 Sascha L. Teichmann Fixed flys/issue262: Unified user and system datacage template
2011-08-18 Sascha L. Teichmann flys/issue260: Datacage uses master_artifacts view now.
2011-08-18 Sascha L. Teichmann Datacage: Added view to schema to select master artifacts.
2011-08-18 Sascha L. Teichmann Datacage user template: Removed state filter because it was broken. Simplified by joining two contexts.
2011-08-18 Felix Wolfsteller Fix rendering of Annotations/lines under certain zooming conditions, ChangeLog.
2011-08-18 Felix Wolfsteller Added legend for annotations to LongitudinalSectionDiagram.
2011-08-17 Felix Wolfsteller Moved StickyAxisAnnotation into new package de.intevation.flys.jfree .
2011-08-17 Felix Wolfsteller Part of refactoring (see next commit).
2011-08-17 Felix Wolfsteller Extracted and renamed CustomAnnotation to StickyAxisAnnotation. Also removed
2011-08-17 Felix Wolfsteller Improved CustomAnnotation rendering.
2011-08-17 Felix Wolfsteller Added proof-of-concept collision detection for text annotations.
2011-08-16 Felix Wolfsteller Started implementation of CustomAnnotation to plot collision-free annotations.
2011-08-16 Felix Wolfsteller Slightly improved rendering of annotations in LongitudinalSection-plots.
2011-08-15 Sascha L. Teichmann Fix for flys/issue191
2011-08-12 Felix Wolfsteller Let AnnotationArtifact fetch "more correct" data.
2011-08-12 Felix Wolfsteller Added functionality to query range and point-annotations only to
2011-08-11 Sascha L. Teichmann Datacage: Added a development mode for recommendations
2011-08-11 Felix Wolfsteller Picky Cosmetics.
2011-08-11 Felix Wolfsteller Made (kind of dummy-) Annotations in LongitudinalSection diagrams visible.
2011-08-11 Felix Wolfsteller Added configuration for AnnotationArtifacts.
2011-08-11 Felix Wolfsteller Added initial version of AnnotationArtifact and friends.
2011-08-10 Sascha L. Teichmann Datacage: Extended schema for artifacts and collections
2011-08-10 Sascha L. Teichmann Make it compilable again (BackendListener interface changed).
2011-08-10 Sascha L. Teichmann Datacage: Templates now can nest <dc:elements> into other elements in the body of <dc:context>
2011-08-10 Sascha L. Teichmann Datacage: Fixed caching issue leading to incorrect results.
2011-08-09 Sascha L. Teichmann Added <old_calculations> element
2011-08-09 Sascha L. Teichmann Cosmetic: Replaced usage of legacy java.util.Stack with java.util.Deque.
2011-08-04 Sascha L. Teichmann Datacage: use more compatible casts to UUIDs
2011-08-04 Sascha L. Teichmann Datacage: added first user specific config for cross sections.
2011-08-04 Sascha L. Teichmann Added a <dc:comment> tag to place comments in the meta data templates.
2011-08-04 Sascha L. Teichmann Meta data service: Be a bit more tolerant about empty strings for UUIDs of artifact and user.
2011-08-03 Sascha L. Teichmann Bring user specific meta data service to life.
2011-08-03 Felix Wolfsteller Minor cosmetics (comments).
2011-08-03 Felix Wolfsteller Minor cosmetics, (comments).
2011-08-03 Sascha L. Teichmann Fixed potential NPE in collection monitor
2011-08-02 Sascha L. Teichmann Added support for more than one db connection in datacage templating.
2011-08-02 Sascha L. Teichmann Datacage: Forgot to fetch dialect dependent SQL statement for deleting artifacts by uuid.
2011-08-02 Sascha L. Teichmann Datacage: Set the name of the collections at initial scan, too.
2011-08-02 Sascha L. Teichmann Datacage: fixed wrong SQL references
2011-08-02 Sascha L. Teichmann Datacage: Fixed two NPEs
2011-08-02 Sascha L. Teichmann Forwarded kill collections and artifacts events to datacage.
2011-08-02 Sascha L. Teichmann The signature of BackendListener in artifactdatabase has changed.
2011-08-01 Sascha L. Teichmann Datacage: completed backend listener stuff.
2011-08-01 Sascha L. Teichmann Datacage: Update collection names on change. Remove artifacts from collections.
2011-08-01 Sascha L. Teichmann Datacage: Pass global context to datacage if calls come from backend listener.
2011-08-01 Sascha L. Teichmann Fixed recursion bug.
2011-08-01 Sascha L. Teichmann Added some debug output
2011-08-01 Sascha L. Teichmann Wire datacage with backend of artifact database.
2011-08-01 Sascha L. Teichmann Datacage: Moved templating in a better suited package.
2011-08-01 Sascha L. Teichmann For doc purposes add section with db config in config.xml
2011-07-31 Sascha L. Teichmann Datacage: delete artifacts at initial scan, too. Fixed problem with writing content of state data.
2011-07-31 Sascha L. Teichmann Added kludge for the null type information of artifact data.
2011-07-31 Sascha L. Teichmann Fixed default connection URL to use a namend in-mermory database.
2011-07-31 Sascha L. Teichmann Fixed datacage db scheme. add some debug output.
2011-07-29 Sascha L. Teichmann Datacage: Store
2011-07-29 Sascha L. Teichmann Store outs of artifacts into datacage db at initial scan.
2011-07-29 Sascha L. Teichmann Add artifacts data into datacage db at initial scan.
2011-07-29 Sascha L. Teichmann Add artifacts into datacage db at initial scan.
2011-07-28 Sascha L. Teichmann Datacage: Add collection items at initial scan.
2011-07-28 Sascha L. Teichmann Datacage: Add collections at initial scan.
2011-07-28 Sascha L. Teichmann Datacage: Add users at initial scan.
2011-07-28 Sascha L. Teichmann Datacage SQL schema: Using sequences for id generation now
2011-07-28 Sascha L. Teichmann Datacage: clear database before initial scan
2011-07-28 Sascha L. Teichmann Ajusted datacage to use the SQL infrastructure from the artifact database.
2011-07-27 Sascha L. Teichmann Added the datacage as lifetime listener to the artifact database to create the initial index.
2011-07-27 Sascha L. Teichmann datacage: prepared access to outs of artifacts.
2011-07-27 Sascha L. Teichmann Datacage: Added ON DELETE CASCADE constraints in schema.
2011-07-26 Sascha L. Teichmann Added schema for datacage db
2011-07-26 Sascha L. Teichmann Removed Hello-World-App
2011-07-25 Sascha L. Teichmann Made meta data service thread safe.
2011-07-25 Sascha L. Teichmann Improved XPath handling for absent flags.
2011-07-25 Sascha L. Teichmann meta data service: Added 'if log.isDebugEnabled() {}'
2011-07-25 Sascha L. Teichmann meta data service: made artifact optional and allow passing extra parameters.
2011-07-23 Sascha L. Teichmann Reuse the compiled statements in meta data service.
2011-07-22 Sascha L. Teichmann Added caching support for the static part of the datacage.
2011-07-22 Ingo Weinzierl Prepared the FLYSArtifactCollection to support the storage of already loaded recommendations.
2011-07-22 Sascha L. Teichmann meta data service: Adjusted to use the DataCage recommendations.
2011-07-22 Sascha L. Teichmann Meta data template: Allow '-' in variable names.
2011-07-21 Ingo Weinzierl Added missing river_id for the datacage factory node of the wmsbackground layer.
2011-07-21 Ingo Weinzierl Added the river_id to the datacage nodes for riveraxis and wms background layer.
2011-07-21 Sascha L. Teichmann Adjusted services to implement changed signature.
2011-07-21 Ingo Weinzierl Modified the CollectionMonitor to recommend artifacts for the current state's outputs only.
2011-07-21 Ingo Weinzierl Modified the CollectionMonitor (for recommended artifacts) to use the DataCage.
2011-07-20 Sascha L. Teichmann Datacage: recommendation mechanism now accepts nodes to append results.
2011-07-20 Sascha L. Teichmann Datacage template: Added a macro mechanism.
2011-07-20 Sascha L. Teichmann Datacage template: Added a new 'if' construct similiar to XSLT
2011-07-20 Sascha L. Teichmann DataCage: Added a recommend() method to generate recommendations for
2011-07-20 Sascha L. Teichmann Datacage: Added custom provider for XPath functions.
2011-07-20 Ingo Weinzierl Added configurations for river WMSe (currently for Saar, Mosel, Elbe).
2011-07-20 Sascha L. Teichmann Meta data template: Added new choose/when/otherwise construct similiar to XSLT
2011-07-20 Ingo Weinzierl Made the background layer in floodmaps configurable.
2011-07-20 Ingo Weinzierl Removed the extent of the background layer facet.
2011-07-20 Ingo Weinzierl Set the extent of created WMSLayerFacets.
2011-07-20 Ingo Weinzierl WMSLayerFacets can have an extent now.
2011-07-20 Ingo Weinzierl Adapted the method of FLYSArtifact.setup() which has been changed in the artifact package.
2011-07-20 Sascha L. Teichmann Added standalone app to debug the datacage template.
2011-07-20 Sascha L. Teichmann First step to factor out the "Datenkorb" logic into a service independent singleton.
2011-07-20 Ingo Weinzierl Removed a duplicated property in ManagedFacets.
2011-07-19 Sascha L. Teichmann Improved error handling in loading meta data template.
2011-07-19 Sascha L. Teichmann Made meta data template configurable.
2011-07-19 Sascha L. Teichmann Meta data: Make database ids identifiable with unique name "db-id"
2011-07-19 Ingo Weinzierl Use the Facet.toXML() method to write facet elements into the DESCRIBE document of the Collection.
2011-07-18 Ingo Weinzierl Simplified the code to read all provided Outputs of an Artifact.
2011-07-18 Ingo Weinzierl The WMSLayerFacet now writes the WMS URL and layernames to its XML representation.
2011-07-18 Ingo Weinzierl Added artifacts/states for WMS background an river axis and a configuration for the output-defaults.
2011-07-18 Ingo Weinzierl Added a computeInit() method to intialize data/facets after creating new artifacts.
2011-07-14 Ingo Weinzierl Append artifact recommendations to the artifact's describe document.
2011-07-14 Ingo Weinzierl Adapted a method signature of FLYSContextFactory to apply the changes in the artifact database.
2011-07-14 Sascha L. Teichmann Debugged the water fill algorithm.
2011-07-14 Ingo Weinzierl Added a monitor that creates new artifacts for default themes in charts and maps.
2011-07-13 Sascha L. Teichmann Add Swing standalone app to test/develope cross sections directly from database.
2011-07-13 Ingo Weinzierl Introduced a new output 'floodmap' for the FloodMapState.
2011-07-12 Sascha L. Teichmann Fixed corner case.
2011-07-11 Sascha L. Teichmann Generate water level lines for given cross section.
2011-07-08 Ingo Weinzierl Artifacts and Collections now support the 'type' member of Outputs.
2011-07-06 Ingo Weinzierl Removed a type from transition model.
2011-07-06 Ingo Weinzierl The DataFacets are now able to store the ID of the create which created them.
2011-07-06 Ingo Weinzierl Facets created by the WaterlevelState store information about state's id and artifact's hash value now.
2011-07-05 Ingo Weinzierl Changed the desired UI provider for the WaterlevelGroundDifferences state.
2011-07-05 Ingo Weinzierl Enhanced the transition model to continue the parameterization in the waterlevel state to compute flood maps.
2011-07-04 Sascha L. Teichmann Fix(?) for flys/issue114
2011-07-03 Sascha L. Teichmann Added the math needed to calculate "W-Differenzen" in "Laengsschnitten"
2011-07-01 Ingo Weinzierl An initial implementation to render chart series based on the XML configuration in themes.xml.
2011-07-01 Ingo Weinzierl #135 Modified the way to store datasets for different chart axes.
2011-07-01 Ingo Weinzierl Added the option to call the distance info service with a filter to fetch locations or distances only.
2011-06-30 Ingo Weinzierl #159 Modifications in the transition model to support a state with a kilometer range input only.
2011-06-29 Sascha L. Teichmann Downgraded Trove to 1.1-beta-5
2011-06-28 Ingo Weinzierl Fixed the JBoss Maven repository.
2011-06-28 Ingo Weinzierl Tagged RELEASE 2.4 of flys-artifacts.
2011-09-19 Ingo Weinzierl Tagged RELEASE 2.5 of flys-client.
2011-09-16 Ingo Weinzierl Improved the DEM datacage panel to display the DEMs only.
2011-09-16 Raimund Renkert Hide geometry layer in floodmap when tab selection changes.
2011-09-16 Felix Wolfsteller Made DatacageTwinPanel somewhat usable.
2011-09-16 Felix Wolfsteller Added loadMany-function to LoadArtifactService.
2011-09-16 Raimund Renkert Rollback for input assistance of "Q/D" table.
2011-09-15 Ingo Weinzierl #259 Refresh charts after loading new Themes / Artifacts from Datacage.
2011-09-15 Ingo Weinzierl #259 Use the LoadArtifactService to clone Artifacts and add them to the current Collection.
2011-09-15 Ingo Weinzierl Clone Artifacts and add them to the current Collection in the WspDatacagePanel.
2011-09-15 Ingo Weinzierl Create new collections initially when starting a new project.
2011-09-15 Raimund Renkert Validate than the input field for single locations contains a single value.
2011-09-15 Raimund Renkert Added formatter for numeric columns that converts the decimal separator.
2011-09-15 Ingo Weinzierl Refactored server code - HTTP related code moved to ArtifactsHelper and CollectionHelper which makes us able to combine Artifact and Collection protocol stuff in a single RPC service.
2011-09-15 Raimund Renkert Changed table header string and set the column width to percental value.
2011-09-14 Raimund Renkert Changed columns to the correct type for most tables.
2011-09-14 Raimund Renkert Changed i18n string for "Q/D" table header.
2011-09-14 Ingo Weinzierl Added stubs for two datacage panels - one for choosing waterlevels, one for choosing DEMs.
2011-09-14 Raimund Renkert Changed i18n string for search field label.
2011-09-14 Felix Wolfsteller New widget for future use.
2011-09-14 Raimund Renkert Changed style for loading panel.
2011-09-14 Felix Wolfsteller Refactored DatacageWidget to allow reuse in other use-cases.
2011-09-14 Raimund Renkert Fixed a problem with renaming collection view title and duplicating projects.
2011-09-14 Raimund Renkert Update the collection view title when the project name changes.
2011-09-14 Raimund Renkert Removed the table listener for "Q" input. The table is no longer used
2011-09-14 Raimund Renkert Clear the table filter on tab selection change and input method change.
2011-09-14 Ingo Weinzierl Bugfix: Use name instead of description for loading new facets via Datacage.
2011-09-14 Felix Wolfsteller Rest for fix for flys/issue311 .
2011-09-14 Felix Wolfsteller Fix flys/issue309 (crosssection-km-spinner does not respond to return key).
2011-09-14 Raimund Renkert Fixed some minor problems and strings in projectlist.
2011-09-14 Felix Wolfsteller Fix issue flys/issue311 (i18n crossection).
2011-09-13 Raimund Renkert Issue234/266: Added feature for duplicating projects.
2011-09-13 Raimund Renkert Changed field size from fixed to percental value in helper tables.
2011-09-13 Raimund Renkert Added filter functionality to the project list.
2011-09-13 Ingo Weinzierl Fixed some bugs that avoided datacage usage.
2011-09-13 Ingo Weinzierl Datacage window in Output tabs fetches information for the current output now.
2011-09-13 Ingo Weinzierl I293: Set the style of digitized features in the map.
2011-09-13 Ingo Weinzierl Bugfix: #289 Set map units 'm'.
2011-09-13 Ingo Weinzierl Added tooltips for the maptoolbar.
2011-09-12 Raimund Renkert Set the data table cells selectable for copy&paste.
2011-09-12 Ingo Weinzierl Introduced i18n for the loading panel used during floodmap calculation.
2011-09-12 Raimund Renkert Set header fields to fixed order in project list.
2011-09-12 Raimund Renkert Changed i18n string for empty table and set header fields to fixed order.
2011-09-12 Raimund Renkert Updated the search field style including i18n and changed the handler
2011-09-12 Ingo Weinzierl Set the default value of the AutoInteger panel to 'auto' if no other value is set.
2011-09-12 Ingo Weinzierl Query MapInfo object for correct river (was hard coded).
2011-09-12 Ingo Weinzierl Suppress the GeoJSON string to be drawn into the static UI.
2011-09-12 Ingo Weinzierl Removed needless imports.
2011-09-09 Ingo Weinzierl Display status message and progress information in the WSPLGEN loading panel.
2011-09-08 Raimund Renkert Fixed the filter function and the helper panel.
2011-09-08 Felix Wolfsteller Minor cosmetics.
2011-09-08 Felix Wolfsteller Added new UIProvider "DatacageTwinPanel", pass user via UIProviderFactory.
2011-09-08 Felix Wolfsteller Added "w_differences" translation.
2011-09-08 Ingo Weinzierl Remove the loading panel when its Artifact's background process is finished.
2011-09-08 Felix Wolfsteller Cosmetics, doc.
2011-09-07 Raimund Renkert Added filter for the "description" row of helper input tables.
2011-09-07 Ingo Weinzierl Parse Artifact's 'background-processing' attribute and lock the UI if this attribute is true.
2011-09-07 Felix Wolfsteller Display Action Widget only for cross_section theme/facet.
2011-09-06 Ingo Weinzierl Set WSPLGEN specific 'type' attributes after digitizing new geometries.
2011-09-06 Felix Wolfsteller Fix broken build.
2011-09-06 Felix Wolfsteller Subclassed ChartThemePanel, trigger redraws of Chart when interaction with
2011-09-06 Felix Wolfsteller Added RedrawRequestHandler interface and friend.
2011-09-06 Ingo Weinzierl Bugfix flys/issue166: Parse Collection names from DESCRIBE.
2011-09-06 Felix Wolfsteller Minor cosmetics.
2011-09-02 Felix Wolfsteller Refactored to allow specialized controls within the ChartThemePanel, stubby
2011-09-02 Felix Wolfsteller Minor Cosmetics, removed import.
2011-09-02 Felix Wolfsteller Cosmetics, doc.
2011-09-02 Felix Wolfsteller Added FeedService Implementation.
2011-09-01 Ingo Weinzierl Set the 'typ' attribute of new features (digitized) in the map.
2011-08-31 Felix Wolfsteller Added translation for "cross_section".
2011-08-25 Sascha L. Teichmann Moved datacage into a separated widget.
2011-08-25 Sascha L. Teichmann Loading recommendations: If no reference artifact is given use current
2011-08-24 Sascha L. Teichmann Compile a list of recommendations out of
2011-08-24 Sascha L. Teichmann Added outs/facet filters when creation new artifacts.
2011-08-24 Sascha L. Teichmann Allow passing no master artifact to RPC service when creating new artifact.
2011-08-24 Sascha L. Teichmann Forward recommendations as a structure to RPC service.
2011-08-24 Felix Wolfsteller Fix authorship in ChangeLog.
2011-08-24 Felix Wolfsteller Fix loading of recommendations when collection is not yet in place.
2011-08-24 Felix Wolfsteller Ensure list of recommendations is non-null after construction of DefaultCollection.
2011-08-24 Sascha L. Teichmann Made Recommendation a class for direct use.
2011-08-24 Felix Wolfsteller Minor cosmetics.
2011-08-24 Sascha L. Teichmann Datacage: Use 'ids' instead of 'num' in user specific part, too.
2011-08-24 Sascha L. Teichmann Datacage: s/db-ids/ids/g to unify system and user specific loading.
2011-08-24 Ingo Weinzierl Removed the digitize controls from map widget that is used in the floodmap state.
2011-08-24 Sascha L. Teichmann Generate unique keys for anonymous artifacts (aka static data).
2011-08-24 Ingo Weinzierl Added a UIProvider that displays a combobox on the left and a map widget in the helper container.
2011-08-24 Ingo Weinzierl Added a panel that wraps all the stuff to combine SmartGWT and GWT-OpenLayers.
2011-08-23 Sascha L. Teichmann Datacage: Re-written ToLoad to feature the new filter models.
2011-08-23 Sascha L. Teichmann Datacage: Added models better suited for creating artifact facet filters.
2011-08-23 Ingo Weinzierl Display the output modes of the master artifact only - all other artifact's output modes are NOT visible to the user.
2011-08-23 Ingo Weinzierl Added a service to get some basic spatial information used for map creation.
2011-08-22 Sascha L. Teichmann Datacage: Re-added the outs parameter to the meta data service.
2011-08-22 Sascha L. Teichmann Datacage: Aggregate items to load for easier filtering facets
2011-08-22 Ingo Weinzierl Save and reload user defined geometries (barriers) in the map.
2011-08-22 Ingo Weinzierl Added a NoInputPanel to suppress the creation of an input panel.
2011-08-19 Ingo Weinzierl Set the map projection and its max extent dynamically - information extracted from facets.
2011-08-12 Sascha L. Teichmann Add code to extract data to load from datacage tree.
2011-08-09 Sascha L. Teichmann Datacage: Build UI tree in a more compatible style
2011-08-09 Felix Wolfsteller UI: Set CollectionViews ("Window") title to include UUID of Collection.
2011-08-09 Felix Wolfsteller UI: Cosmetics in log messages of CollectionView.
2011-08-09 Felix Wolfsteller Adjusted German translation.
2011-08-08 Sascha L. Teichmann Reverted accidental commit.
2011-08-08 Sascha L. Teichmann Removed superfluous imports.
2011-08-08 Sascha L. Teichmann Removed superfluous imports.
2011-08-08 Sascha L. Teichmann Datacage: Added a subclass of TreeNode to carry the informations needed by the loading listeners.
2011-08-08 Sascha L. Teichmann Meta data service converter: transfer attributes to client, too.
2011-08-08 Sascha L. Teichmann Meta data service: Create correct request document now.
2011-08-08 Sascha L. Teichmann Pass user id to the meta data service.
2011-08-02 Felix Wolfsteller Minor cosmetic changes (javadoc comments).
2011-07-22 Ingo Weinzierl The Collection now knows its already loaded recommendations - the CollectionView will not load recommendations that have already been loaded before.
2011-07-21 Ingo Weinzierl Repaired broken XPath expression.
2011-07-21 Ingo Weinzierl Repaired broken recommendation parsing from Artifact's DESCRIBE document (which structure has changed).
2011-07-20 Ingo Weinzierl The layers created in the floodmap reflect to the facets this output mode has.
2011-07-20 Ingo Weinzierl Refactored code of theme panel and added a MapThemePanel.
2011-07-19 Ingo Weinzierl Facets read from Collection's DESCRIBE document keep all their attributes after the Collection's attribute has been modified.
2011-07-18 Ingo Weinzierl Read/create recommended Artifacts and add them to the current Collection.
2011-07-12 Ingo Weinzierl Added map tools to measure lines and polygons.
2011-07-12 Ingo Weinzierl Added missing ChangeLog entry for the last commit.
2011-07-12 Ingo Weinzierl Added map controls for digitizing and removing barriers.
2011-07-11 Ingo Weinzierl Added controls to navigate in the map.
2011-07-11 Ingo Weinzierl Finished layouting the map components.
2011-07-08 Ingo Weinzierl Introduced GwtOpenLayers to bring up maps.
2011-07-08 Ingo Weinzierl Improved the process of creating OutputTabs. Added support for map output.
2011-07-07 Ingo Weinzierl Added strings for the output mode 'floodmap'.
2011-07-07 Ingo Weinzierl Set default values in the BooleanPanel, TextProvider and AutoIntegerPanel.
2011-07-07 Ingo Weinzierl Finished the panel to enter waterlevel/ground information (from, to, diff).
2011-07-07 Ingo Weinzierl Finished the panel to activate/deactivate optional parameters.
2011-07-07 Ingo Weinzierl Finished the panel that allows integers and the string 'auto'.
2011-07-06 Ingo Weinzierl Made stepping forward/backword much smoother in the parameter list.
2011-07-06 Ingo Weinzierl Layout improvements related to the height of components in the current parameterlist.
2011-07-06 Ingo Weinzierl Integrated a stacked panel on the right side of the ParameterList that enables users to see calculation results and the helper panel at the same time.
2011-07-05 Ingo Weinzierl Added new UI providers.
2011-07-05 Ingo Weinzierl Commit forgotten ChangeLog.
2011-07-05 Ingo Weinzierl Added a panel that lets users step to a next state without feeding the current artifact with new data.
2011-07-04 Ingo Weinzierl Added the missing 'back'-button to the DistancePanel.
2011-07-01 Ingo Weinzierl #159 Added listeners to the locations and distances tables of the kilometer range panel to set the from/to fields.
2011-07-01 Ingo Weinzierl #159 The tables in the WQ panel for calculation 4 are now filled with data.
2011-06-30 Ingo Weinzierl The distance panel got two tables for locations and ranges. Both do not load any data until now.
2011-06-30 Ingo Weinzierl Implemented a new panel to enter kilometer ranges (with no option to insert locations).
2011-06-29 Ingo Weinzierl #185 Repaired zooming for IE8 and Chrome.
2011-06-29 Sascha L. Teichmann Reordered delete and rename in project context menu, add separator.
2011-06-29 Ingo Weinzierl #181 Repaired activate/deactivate function in theme list.
2011-06-28 Ingo Weinzierl GWT version upgrade from 2.1.1 to 2.3.0
2011-06-28 Ingo Weinzierl Tagged RELEASE 2.4 of flys-client.
2012-09-28 Thomas Arendsen Hein merged flys-backend/2.4 2.4
2011-06-28 Ingo Weinzierl Tagged RELEASE 2.4 of flys-backend.
2011-06-27 Ingo Weinzierl Prepared Changes for the upcoming release.
2011-06-26 Sascha L. Teichmann Removed trailing whitespace.
2011-06-26 Sascha L. Teichmann Removed superfluous imports.
2011-06-26 Sascha L. Teichmann Added a method to river to find the gauge with the max overlap with a given interval.
2011-06-26 Sascha L. Teichmann When
2011-06-22 Sascha L. Teichmann River: Added method to find gauge by its name.
2011-06-19 Sascha L. Teichmann Importer: Fix import of annotation type classification.
2011-06-19 Sascha L. Teichmann Added classification of annotation types. Needs testing!
2011-06-18 Sascha L. Teichmann river model: Added method to find gauge by a position lying in its range.
2011-06-15 Sascha L. Teichmann First part of flys/issue18
2011-06-14 Sascha L. Teichmann Fix for flys/issue110: Start index was shifted by one.
2011-06-14 Sascha L. Teichmann Forgot to store reference to edge.
2011-06-14 Sascha L. Teichmann Register the backend model.
2011-06-14 Sascha L. Teichmann Import edges to database.
2011-06-14 Sascha L. Teichmann Added 'Kanten' model
2011-06-08 Sascha L. Teichmann River: add method to find gauge by its station position.
2011-05-26 Sascha L. Teichmann River: Make search for gauges independent of from/to order.
2011-05-24 Sascha L. Teichmann Added a new view to select qs of a WST.
2011-05-24 Sascha L. Teichmann Added a new view to select ws of a WST.
2011-05-23 Sascha L. Teichmann flys/issue76: Close gaps between q ranges
2011-05-20 Ingo Weinzierl Tagged release 2.3.1 of flys-backend.
2012-09-28 Thomas Arendsen Hein merged flys-artifacts/2.4
2011-06-28 Ingo Weinzierl Tagged RELEASE 2.4 of flys-artifacts.
2011-06-27 Ingo Weinzierl The WST export contains the corrected W values now.
2011-06-27 Sascha L. Teichmann WQ: Guessing increaing w is not based on direct neighbors any more.
2011-06-27 Sascha L. Teichmann ATWriter: Fixed array size to construct spline with stricly increasing values.
2011-06-27 Ingo Weinzierl Prepared Changes for the upcoming release.
2011-06-27 Sascha L. Teichmann Fix for flys/issue150: Invert the x axis if its guessed that water is increasing.
2011-06-27 Sascha L. Teichmann WQ: Added a method to guess is increasing.
2011-06-27 Ingo Weinzierl #177 Commented out the code that generates the series names in discharge curves. This code currently generates memory problems and stops the server accepting new http requests.
2011-06-26 Sascha L. Teichmann Removed trailing whitespace.
2011-06-26 Sascha L. Teichmann Removed dead code.
2011-06-26 Sascha L. Teichmann Forgot to check in last ChangeLog change.
2011-06-26 Sascha L. Teichmann Fix for flys/issue173
2011-06-26 Sascha L. Teichmann Fix for flys/issue147
2011-06-26 Sascha L. Teichmann Fix for flys/issue86
2011-06-26 Sascha L. Teichmann Fix for flys/issue86
2011-06-25 Sascha L. Teichmann Fixed "W am Pegel" calculations.
2011-06-24 Ingo Weinzierl #174 Longitudinal section charts will now have an upper margin again.
2011-06-24 Ingo Weinzierl #172 Charts of type duration curve will now have a lower X set to '0'.
2011-06-23 Sascha L. Teichmann ATWriter: Results are now in cm. Made it more robust against corner cases.
2011-06-23 Sascha L. Teichmann Added generation and configuration of AT facets.
2011-06-23 Sascha L. Teichmann Added exporter for AT facets.
2011-06-23 Sascha L. Teichmann New AT writer for results.
2011-06-23 Ingo Weinzierl #157 Both types of discharge curves will now include the '0' value on the x-axis.
2011-06-23 Sascha L. Teichmann WQDay is based on WQ now to make it exportable as AT.
2011-06-23 Sascha L. Teichmann Added base class WQ for WQKms.
2011-06-23 Sascha L. Teichmann Corrected configuration for error reports.
2011-06-22 Ingo Weinzierl #164 Create the items for the adapted WQ state with range information for W and Q.
2011-06-22 Sascha L. Teichmann "Abflusskurve am Pegel" looks correct again.
2011-06-22 Sascha L. Teichmann Improved situtation on rendering "Abflusskurve am Pegel". Not fully working, yet.
2011-06-22 Sascha L. Teichmann Generate facets for "Abflusskurven am Pegel". Not working by now. :-/
2011-06-22 Ingo Weinzierl #161 Include the 0 on the second y axis (the Q axis) in longitudinal section charts intially.
2011-06-21 Sascha L. Teichmann Draw correction curve again.
2011-06-21 Ingo Weinzierl #157 Computed discharge curve charts always have a lower bound set to 0.
2011-06-21 Ingo Weinzierl #90 Added a margin between chart data and chart axes to avoid displaying curves on the chart border.
2011-06-21 Sascha L. Teichmann Fix for flys/issue158
2011-06-21 Sascha L. Teichmann Fix for flys/issue154
2011-06-21 Sascha L. Teichmann Only generate 'outs' if they have facets.
2011-06-21 Ingo Weinzierl Put the time-to-live of the collection into its DESCRIBE document.
2011-06-20 Sascha L. Teichmann Configured states to generate report facets.
2011-06-20 Sascha L. Teichmann Generate report facets if there are problems with the calculations.
2011-06-20 Sascha L. Teichmann Added generator and facet for error reports.
2011-06-20 Sascha L. Teichmann New model to transport data and error reports of calculations.
2011-06-18 Sascha L. Teichmann Added calculation "am Pegel" version to the "Wasserspiegellage" calculation.
2011-06-18 Sascha L. Teichmann Removed more dead code.
2011-06-18 Sascha L. Teichmann Removed dead code.
2011-06-18 Sascha L. Teichmann Only generate facets when needed.
2011-06-17 Sascha L. Teichmann Merged revisions 2127-2133,2136-2137,2140,2143-2144,2146,2150-2151,2153-2154 via svnmerge from
2011-06-17 Sascha L. Teichmann Generate data facets for the computed states. facets-slt
2011-06-17 Sascha L. Teichmann Add facet to access raw computed data. facets-slt
2011-06-17 Sascha L. Teichmann Base WST/CSV exports on facets. TODO: generate the facets. facets-slt
2011-06-17 Sascha L. Teichmann call computeAdvance() if we want to advance. facets-slt
2011-06-17 Sascha L. Teichmann mico opt: inter cmps are faster than str cmps. facets-slt
2011-06-17 Sascha L. Teichmann make getGauges() more robust facets-slt
2011-06-17 Sascha L. Teichmann Removed ComputeCallback because this was thought too complicated. Fixed issue with facets not be re-generated if same state is entered again. facets-slt
2011-06-17 Ingo Weinzierl OutGenerators use now facets to fetch necessary data. facets-slt
2011-06-16 Ingo Weinzierl OutGenerators doOut() takes a facet object now instead of just its name. facets-slt
2011-06-16 Ingo Weinzierl Add index and description of facets to collections describe document. facets-slt
2011-06-16 Ingo Weinzierl Write computed facets into artifacts describe document. facets-slt
2011-06-16 Ingo Weinzierl Generated facets for each output aspect. facets-slt
2011-06-16 Ingo Weinzierl Store facets for each state. facets-slt
2011-06-16 Ingo Weinzierl Use enums to dispatch computeFeed() and computeAdvance(). facets-slt
2011-06-16 Ingo Weinzierl Added two more compute() methods to ComputeCallback to distinguish between different phases of the artifact. facets-slt
2011-06-16 Ingo Weinzierl Moved Waterlevel state into the correct package. facets-slt
2011-06-16 Ingo Weinzierl Added a compute() method to WINFOArtifact which acts as a dispatcher for different computations. It triggers a calculation based on ComputeCallbacks that are generated by the current states. facets-slt
2011-06-15 Ingo Weinzierl Merged with trunk and introduced hashing of computed values. facets-slt
2011-06-17 Ingo Weinzierl Added a parameter 'wq_free' that determines that mode of calculation 1 (specifies if the calculation is bound to a gauge or not).
2011-06-17 Ingo Weinzierl DischargeLongitudinalSectionCurve will have corrected W facets now.
2011-06-14 Sascha L. Teichmann DistanceInfoService: Got rid of namespace in result document.
2011-06-14 Ingo Weinzierl #77 The curves in a duration chart will have names now.
2011-06-14 Ingo Weinzierl The min/max W/Q ranges in the panel for calculation4 are written into the DESCRIBE.
2011-06-14 Sascha L. Teichmann Write top 'Oberkante' and bottom 'Unterkante' to out going XML if they exist.
2011-06-14 Ingo Weinzierl The state that is used to enter locations writes the river's range into the DESCRIBE now.
2011-06-10 Sascha L. Teichmann Added error reporting to 'Wasserspiegellage' calculation.
2011-06-10 Sascha L. Teichmann Added error reporting to 'Abflusskurve' calculation.
2011-06-10 Sascha L. Teichmann Added error reporting to 'Dauerzahlen' calculation.
2011-06-10 Sascha L. Teichmann Added methods to remove NaN values.
2011-06-10 Sascha L. Teichmann Added calculation base class to collect the problems during the calculations. Adjusted calculation 4 to use the mechanism.
2011-06-09 Ingo Weinzierl Changed the zoom process - the values in the chart request document are percentual values that apply to every axis.
2011-06-09 Ingo Weinzierl Corrected axes/datasets mappings.
2011-06-08 Sascha L. Teichmann Berechnung 4: Determine the gauges by their station position. This hopefully fixes segment assignment problems.
2011-06-08 Sascha L. Teichmann Berechnung 4: Added more debug output
2011-06-08 Ingo Weinzierl #103 PART 1: The numbers which are written into the static DESCRIBE part are i18n formatted now.
2011-06-08 Ingo Weinzierl #93 Changed the name of calculation type 4.
2011-06-08 Ingo Weinzierl Made the chart range determination more robust against NaN values.
2011-06-08 Ingo Weinzierl Set the second y axis to axis position 1 (starts at 0).
2011-06-08 Sascha L. Teichmann s@m³/s@m\\u00b3/s@
2011-06-08 Sascha L. Teichmann s@m³/s@m\u00b3/s@
2011-06-08 Sascha L. Teichmann Only generate an axis element if a axis really exists.
2011-06-07 Sascha L. Teichmann BackJumpCorrector: Simpified array swapping.
2011-06-07 Sascha L. Teichmann Use java.util.List instead of java.util.Vector. Removed superfluous imports.
2011-06-07 Sascha L. Teichmann code clean up in states
2011-06-07 Ingo Weinzierl The ChartInfoGenerator appends axes range information to the document now.
2011-06-07 Sascha L. Teichmann If Artifact.feed() fails do not store invalid values in database.
2011-06-06 Sascha L. Teichmann Removed asymmetrical "- 1" from width calculation.
2011-06-05 Sascha L. Teichmann Berechnung 4: Fixed problem when more than one value per segment are given.
2011-06-05 Sascha L. Teichmann Refactored version of "Berechnung 4"
2011-06-03 Ingo Weinzierl #90 Removed margins between data area border and curves.
2011-06-03 Ingo Weinzierl Refactored the chart creation in the ChartInfoGenerators. Now, every chart is created by the XYChartGenerator again.
2011-06-03 Ingo Weinzierl Charts are zoomed to a specified view if the attribute document for the chart creation contains an x and/or y range.
2011-06-02 Sascha L. Teichmann Set collection ttl to 6 hours.
2011-06-01 Sascha L. Teichmann Added parser for segments
2011-06-01 Sascha L. Teichmann Fix crashes in back jump correction.
2011-06-01 Ingo Weinzierl The matrix that is used to transform chart image coordinates into chart coordinates supports inverted x-axis now.
2011-06-01 Ingo Weinzierl Introduced a new output generators for creating chart info documents.
2011-05-31 Ingo Weinzierl Added support for the 'type' parameter of the collection's out() operation.
2011-05-31 Sascha L. Teichmann Use an explicit reference km for interpolation now.
2011-05-30 Sascha L. Teichmann Introduce a cache for the distance-info service
2011-05-30 Sascha L. Teichmann flys/issue82: Only successful interpolations are named.
2011-05-27 Sascha L. Teichmann Re-eanbled the calculation of the backjump correction.
2011-05-27 Ingo Weinzierl Removed XML debug statement.
2011-05-27 Ingo Weinzierl Moved the code part that skips themes to a better place. This let us paint empty charts with no themes at all.
2011-05-27 Ingo Weinzierl We will no longer put deactivated themes into the chart.
2011-05-27 Ingo Weinzierl Fixed the process of creating and storing the attribute of a collection.
2011-05-26 Sascha L. Teichmann Make "Berechnungsart 4" work independent of flow direction. Commented out back jump correction temporarily.
2011-05-26 Sascha L. Teichmann Generate fields for w/q input depend on flow direction.
2011-05-26 Sascha L. Teichmann Take the flow direction into account.
2011-05-26 Sascha L. Teichmann Round exploded values to a precision of 1e-6.
2011-05-25 Sascha L. Teichmann WST value table: Qs are now stored in ranges for each column.
2011-05-24 Sascha L. Teichmann First part of storing qs in ranges
2011-05-24 Ingo Weinzierl Small bugfixes in the WQ selection state.
2011-05-24 Ingo Weinzierl ISSUE-40 (part I/II) Write values that the user had former selected / inserted into DESCRIBE document to preselect such data in the UI.
2011-05-24 Ingo Weinzierl Removed needless imports.
2011-05-24 Ingo Weinzierl ISSUE-85 (part III/III) Use the given kilometer values for the waterlevel computation.
2011-05-24 Ingo Weinzierl ISSUE-85 (part I/III) Added further fields for the location/range state.
2011-05-24 Sascha L. Teichmann Moved WST value table cache key to a separate class.
2011-05-23 Sascha L. Teichmann Introduce model to store q values of WST columns efficiently.
2011-05-23 Ingo Weinzierl ISSUE-62 (part I/II) States are no longer filled with data - if a state needs user input, it needs to query the owner artifact.
2011-05-23 Ingo Weinzierl Added a method to dump the artifacts state/data.
2011-05-23 Sascha L. Teichmann flys/issue84: Forget to select wst kind.
2011-05-20 Sascha L. Teichmann fix for flys/issue81: km weights were swapped
2011-05-20 Ingo Weinzierl Tagged release 2.3.1 of flys-artifacts.
2011-05-20 Ingo Weinzierl Prepared Changes for the upcoming release.
2011-06-28 Ingo Weinzierl Tagged RELEASE 2.4 of flys-client.
2011-06-27 Ingo Weinzierl #182 Initial WQ mode in adapted wq panel is now Q.
2011-06-27 Ingo Weinzierl Prepared Changes for the upcoming release.
2011-06-26 Sascha L. Teichmann Removed trailing whitespace.
2011-06-26 Sascha L. Teichmann Removed superfluous imports.
2011-06-24 Ingo Weinzierl #165 Set the max length of project names to 50 characters.
2011-06-24 Ingo Weinzierl Zoom-to-max-extent will zoom to the initial chart range now (without zoom values given).
2011-06-24 Ingo Weinzierl #21 Newly created projects cannot be opened twice.
2011-06-23 Ingo Weinzierl #170 Changed the DOM manipulation while zoom and drag operation.
2011-06-23 Sascha L. Teichmann Prepare for AT export.
2011-06-23 Ingo Weinzierl Removed the formatter for project names in the project list.
2011-06-23 Ingo Weinzierl Escape project's names in the project list.
2011-06-23 Ingo Weinzierl #165 (part 1) Added tooltips and table headers in the project list.
2011-06-23 Ingo Weinzierl Improved the exception handling.
2011-06-23 Sascha L. Teichmann First version of error reports.
2011-06-22 Sascha L. Teichmann Stub for report service.
2011-06-22 Ingo Weinzierl The adapted WQ panel now displays warnings if no information are present to validate user input.
2011-06-22 Ingo Weinzierl Register newly created CollectionViews at FLYSWorkspace to avoid an inconsistent view.
2011-06-22 Ingo Weinzierl Open projects are removed from screen if the user deletes them (via project list).
2011-06-22 Ingo Weinzierl Implemented the RPC stubs to set the TTL and name of a collection and to delete an existing collection.
2011-06-22 Ingo Weinzierl Added stubs to set the name and ttl of a collection and to delete a collection.
2011-06-22 Ingo Weinzierl Improved the project list - listeners are notified after setting the name and ttl of a project.
2011-06-22 Ingo Weinzierl Adapted a german string in the WQ panel.
2011-06-22 Ingo Weinzierl #104 The WQ panel now display the selected wq mode.
2011-06-21 Ingo Weinzierl Initialize the combobox in the SelectProvider correctly.
2011-06-21 Ingo Weinzierl #156 Do not display report modes as tabs in the project view.
2011-06-21 Ingo Weinzierl The comboboxes to select the calculation mode are no longer editable.
2011-06-21 Ingo Weinzierl Restore the size of project windows if they are brought up to front.
2011-06-21 Ingo Weinzierl DoubleArrayPanel takes care on empty array fields when adding new double values. This avoids displaying 'null' values.
2011-06-21 Sascha L. Teichmann Filter reports and dispatch them to updateReports().
2011-06-21 Ingo Weinzierl #132 Set the initial mode of the location/distance panel to 'distance'.
2011-06-21 Ingo Weinzierl The project list displays the favorite state of a collection now. A gold star means, that a collection is a owner's favorite project and will never die. A silver star means, that the project is a common project.
2011-06-21 Sascha L. Teichmann Set project list update interval to 5 minutes.
2011-06-21 Ingo Weinzierl #22 Introduced a polling mechanism to refresh the projects of a user in the project list.
2011-06-21 Ingo Weinzierl Added i18n strings for each calculation report output.
2011-06-20 Sascha L. Teichmann Forget to commit changelog
2011-06-20 Sascha L. Teichmann Added dummy report panel.
2011-06-20 Sascha L. Teichmann Removed more expensive XPath.
2011-06-20 Ingo Weinzierl #140, #122: Splitted the WQD table in the WQInputPanel into two tables: a table for QD values and a table for W values - only the QD table is selectable.
2011-06-17 Ingo Weinzierl #140 Code cleanup in WQ table.
2011-06-17 Ingo Weinzierl #118 Added 'wq_free' parameter to feed document even if single value mode is selected.
2011-06-17 Ingo Weinzierl #118 Added a further radio button to select 'Q at Gauge' to the WQ panel.
2011-06-17 Ingo Weinzierl Added 'index' and 'description' of a facet to the collection's attribute document. The ChartThemePanel is now working again.
2011-06-17 Ingo Weinzierl The description of a facet is now displayed in the ChartThemePanel.
2011-06-16 Sascha L. Teichmann Alloc TreeNode arrays with the right size because its known.
2011-06-15 Ingo Weinzierl The DoubleArrayPanel is more tolerant towards entered whitespaces.
2011-06-15 Ingo Weinzierl Avoid GWT throwing warnings if no 'old' items exist for the parameter list.
2011-06-15 Ingo Weinzierl #117 Improved double value parsing in DoubleArrayPanel and DoubleRangePanel.
2011-06-14 Ingo Weinzierl #88 Modified strings in the location/distance panel.
2011-06-14 Sascha L. Teichmann DistanceInfoService: Got rid of namespace. Use DOM instead of XPath.
2011-06-14 Sascha L. Teichmann Bring Oberkante and Unterkante into UI.
2011-06-14 Sascha L. Teichmann Loop through 'Unterkante' 'Oberkante' from service.
2011-06-14 Ingo Weinzierl Adjusted a german error message.
2011-06-14 Ingo Weinzierl Introduced a client side input validation for the adapted WQ panel.
2011-06-14 Ingo Weinzierl Introduced a client side validation for the WQ panel.
2011-06-14 Ingo Weinzierl Introduced an input validation for the location panels.
2011-06-09 Ingo Weinzierl Introduced a client side validation before new user data are sent to the server - the range/location panel already implements this validation.
2011-06-09 Ingo Weinzierl Parse the min/max axes ranges for the ChartInfo and modified the zoom and pan actions to match the current server implementation.
2011-06-09 Ingo Weinzierl #139 Fixed NPE while initialising user defined values in the adapted wq panel.
2011-06-08 Ingo Weinzierl Added units to the selected W or Q values in the static UI part.
2011-06-08 Ingo Weinzierl #43 Modified an english warning text.
2011-06-08 Ingo Weinzierl #21 There might be just a single window for each project now. Users can't open a project twice.
2011-06-08 Ingo Weinzierl Avoid NPE while parsing axes in ChartInfoService.
2011-06-08 Sascha L. Teichmann Don't crash if there is no transformer.
2011-06-08 Ingo Weinzierl Added a dirty hack to display project names shorter than 30 characters.
2011-06-07 Ingo Weinzierl The MouseOut event will now finish a current pan operation.
2011-06-07 Ingo Weinzierl Adapted the ChartInfoService to return more information about charts than before. In addition, the PanControl is added to the chart toolbar.
2011-06-07 Ingo Weinzierl Added a PanControl to pan charts.
2011-06-07 Ingo Weinzierl Adjusted the return values of the CSVExportService, so that GWT can handle those values better.
2011-06-07 Ingo Weinzierl Use the same code to create the attribute document for the chart creation in ChartOutputService and ChartInfoService.
2011-06-06 Ingo Weinzierl Repaired broken zoom-out control.
2011-06-06 Ingo Weinzierl #131 Repaired a broken XPath expression for the chart attributes.
2011-06-06 Ingo Weinzierl Improved the zoombox control: cancel the zoom operation if the mouse pointer leaves the chart area.
2011-06-03 Ingo Weinzierl Added missing icon for the zoom-out control.
2011-06-03 Ingo Weinzierl Added a zoom-out control to the chart toolbar which zooms 10% of the current ranges out.
2011-06-03 Ingo Weinzierl Added a control to reset the zoom of a chart. In addition, the zoom buttons are displayed as ImgButtons now.
2011-06-03 Ingo Weinzierl Append the x and y ranges determined after zooming with the ZoomboxControl to the attribute document used for the chart creation.
2011-06-01 Ingo Weinzierl Added the ChartOutputTab as ZoomHandler for the ZoomboxControl - no zooming is done yet.
2011-06-01 Ingo Weinzierl Implemented a zoombox control and added it to the chart toolbar.
2011-06-01 Ingo Weinzierl Improved the layout of the mouse position panel.
2011-06-01 Ingo Weinzierl Adapted the MousePositionPanel to use the Transform2D object for computing the chart coordinates from image coordinates.
2011-06-01 Ingo Weinzierl The collection object in the CollectionView is now accessible via getter method.
2011-06-01 Ingo Weinzierl Removed a debug statement.
2011-06-01 Ingo Weinzierl Added a chart info service to fetch the info document for a specific chart from artifact server.
2011-05-27 Ingo Weinzierl Added a first implementation of a MousePositionPanel - work is not finished yet.
2011-05-27 Ingo Weinzierl Moved the toolbar stuff of the chart panel into an own class.
2011-05-27 Ingo Weinzierl Replaced buttons displayed as labels with real buttons.
2011-05-27 Ingo Weinzierl The chart in the ChartOutputTab is refreshed when there occur any changes in the chart theme panel.
2011-05-27 Ingo Weinzierl Connected the CollectionAttributeService with the artifact server - Collection modifications will now be stored in the artifact databae.
2011-05-27 Ingo Weinzierl Changes in the chart theme panel will now have an effect on the themes stored at the collection.
2011-05-26 Ingo Weinzierl Connected the actions in the navigation panel with the theme list in the ChartThemePanel - themes can be moved now.
2011-05-25 Ingo Weinzierl Added a navigation panel to the bottom of the theme control panel to move themes up/down (function not implemented yet).
2011-05-25 Ingo Weinzierl Added a service stub to update/modify the attribute of a collection (used in the theme control panel).
2011-05-25 Ingo Weinzierl Removed a bug in the DefaultTheme that prevented setting the artifact of a Theme correctly.
2011-05-25 Ingo Weinzierl The theme list information stored in the attribute of a collection is read and added in form of Themes and ThemeLists to the Collection.
2011-05-25 Ingo Weinzierl Implemented the first step of a theme control panel for charts.
2011-05-25 Ingo Weinzierl Removed needless imports.
2011-05-25 Ingo Weinzierl Added a new package 'chart' that should be the place where chart relevant classes should be stored. Moved ChartOutputTab into that package.
2011-05-25 Ingo Weinzierl Bugfix in the range/location panel - avoid NullPointerExceptions in getData().
2011-05-24 Ingo Weinzierl ISSUE-90 & ISSUE-40 (part II/II) Former selected values are preselected after back jumps.
2011-05-24 Ingo Weinzierl Added i18n error messages.
2011-05-24 Ingo Weinzierl Take care on empty Data objects while initializing default values in Location/distance panel.
2011-05-24 Ingo Weinzierl ISSUE-85 (part II/III) Repaired broken location/range panel.
2011-05-24 Ingo Weinzierl The default values/labels for Data objects are read from DESCRIBE document.
2011-05-24 Ingo Weinzierl Enhanced the Data object to save default values/labels.
2011-05-23 Ingo Weinzierl Added a mechanism to listen to changes relating to output modes of collections and artifacts. Solves a part of ISSUE-62.
2011-05-20 Ingo Weinzierl Reverted commit that changed the default port of the artifact server.
2011-05-20 Ingo Weinzierl Added missing i18n strings for duration curve export.
2011-05-20 Ingo Weinzierl Tagged release 2.3.1 of flys-client.
2011-05-20 Ingo Weinzierl Prepared Changes for release 2.3.1
2012-09-28 Thomas Arendsen Hein merged flys-backend/2.3.1 2.3.1
2011-05-20 Ingo Weinzierl Tagged release 2.3.1 of flys-backend.
2011-05-13 Ingo Weinzierl Prepared Changes for the upcoming release.
2011-05-11 Sascha L. Teichmann Schema: Added a column which tells if a river counts its km up or downwards.
2011-05-10 Sascha L. Teichmann Fixed flys/issue11 and flys51.
2011-05-09 Sascha L. Teichmann Importer: Added unsharp lookup to avoid numerical problems.
2011-05-09 Sascha L. Teichmann Importer: Fix silly bug and set Hibernate session flushing back to auto.
2011-05-09 Sascha L. Teichmann Importer: Change caching strategy not to cause OOM any more.
2011-05-08 Sascha L. Teichmann Importer: Use BigDecimals in hashing to prevent numerical problems. Cache ranges globally, too.
2011-05-08 Sascha L. Teichmann Importer: Only accept main value types 'Q', 'W', 'D' and 'T' by default.
2011-05-08 Sascha L. Teichmann Importer: Cache the discharge table values, too.
2011-05-08 Sascha L. Teichmann Importer: centralized caching
2011-05-08 Sascha L. Teichmann Schema: Dropped constraint which forces discharge tables to have a unique time interval for a given gauge and kind.
2011-05-08 Sascha L. Teichmann Importer: make column names in WST files unique by appending (1), (2) and so on in case of collision
2011-05-06 Sascha L. Teichmann Importer: Import the "HW-Schutzanlagen", too.
2011-05-06 Sascha L. Teichmann Importer: Make import of historical discharge tables work.
2011-05-05 Sascha L. Teichmann Importer: parse historical discharge tables, too. TODO: store them in database.
2011-05-05 Sascha L. Teichmann Importer: Prefix "Zusätzliche Längsschnitte" with "Zus.Längsschnitte" in description.
2011-05-05 Sascha L. Teichmann Import "Hochwasser-Marken", too.
2011-05-05 Sascha L. Teichmann Importer: Ignore lines that contain km positions which were found before in the same WST file.
2011-05-05 Ingo Weinzierl River got a new method that returns all gauges intersected by a given start and end point.
2011-05-03 Sascha L. Teichmann Importer: forgot to fetch time interval peer
2011-05-03 Sascha L. Teichmann Importer: Attach a time interval to a discharge table if we find one during import.
2011-05-03 Sascha L. Teichmann Importer: Try to extract time ranges from at files.
2011-05-03 Sascha L. Teichmann Parse and store "amtliche Linien" wst files.
2011-05-03 Sascha L. Teichmann Importer: parse and store fixation wst files as well
2011-05-03 Sascha L. Teichmann Importer: Support parsing "zusaetzliche Laengsschnitte".
2011-05-02 Sascha L. Teichmann Fixed flys/issue19
2011-05-02 Ingo Weinzierl Introduced a 'scale' parameter in Gauge.determineMinMaxW().
2011-05-01 Sascha L. Teichmann Removed superfluous import.
2011-04-20 Ingo Weinzierl Implemented a WstColumnValue cache to speed up inserting WST files into database.
2011-04-18 Sascha L. Teichmann Forgot to add db update to changelog
2011-04-18 Sascha L. Teichmann Added a view 'wst_value_table' which aggregates the data to build w/q value tables.
2011-04-18 Sascha L. Teichmann Add forgotten one to many relation Wst -> WstColumn.
2011-04-18 Sascha L. Teichmann Import of q ranges of wst files was totally broken.
2011-04-18 Sascha L. Teichmann Importer: Forgot kind parameter in peer fetching query.
2011-04-18 Ingo Weinzierl Added a new method to determine the selected gauge of a river based on a start and end point.
2011-04-15 Sascha L. Teichmann Added 'position' column to wst_columns to allow order them by there column position in the original wst file.
2011-04-15 Sascha L. Teichmann Forget ',' in schema.
2011-04-15 Sascha L. Teichmann Fixed index problem when an empty list is returned.
2011-04-15 Ingo Weinzierl Added methods to retrieve the min and max W and Q values of a Wst and Gauge.
2011-04-15 Sascha L. Teichmann Added new column 'kind' in discharge tables and wst to distinguish between different types.
2011-04-15 Ingo Weinzierl Moved the SessionHolder from flys-artifacts to flys-backend.
2011-04-14 Ingo Weinzierl Added a method to River that returns the min and max distance of the river.
2011-04-03 Sascha L. Teichmann Removed trailing whitespace.
2011-03-30 Ingo Weinzierl Tagged RELEASE 0.1 of FLYS backend.
2012-09-28 Thomas Arendsen Hein merged flys-artifacts/2.3.1
2011-05-20 Ingo Weinzierl Tagged release 2.3.1 of flys-artifacts.
2011-05-20 Hans Plum Notes to Release V 2.3.1
2011-05-19 Sascha L. Teichmann Increment kms array size by one to take the end of range, too.
2011-05-19 Sascha L. Teichmann Use unsharp km lookup (epsilon = 0.0001).
2011-05-19 Ingo Weinzierl ISSUE-66 Fixed broken english subtitle template for longitudinal section charts.
2011-05-19 Ingo Weinzierl The curve of a computed discharge curve has a human readable text now.
2011-05-19 Sascha L. Teichmann Reintroduced titles for the "W for unausgeglichene Abfluesse".
2011-05-19 Ingo Weinzierl Added names for discharge curves (at gauges).
2011-05-19 Sascha L. Teichmann Removed dead code
2011-05-19 Sascha L. Teichmann use correct kms and step width now now
2011-05-18 Sascha L. Teichmann Use new logic to calculate "W für ungleichwertige Abfluesse". Not working yet.
2011-05-18 Ingo Weinzierl Enabled the discharge longitudinal section to be exported as WST.
2011-05-18 Sascha L. Teichmann flys/issue69: Connected calculation with the UI
2011-05-18 Ingo Weinzierl W and Q curves in longitudinal section curves will now have names.
2011-05-18 Ingo Weinzierl WSTs will now have a header that contains the names of the Ws or Qs that had been defined for the computation.
2011-05-17 Ingo Weinzierl Implemented writer that creates WSTs and enabled the WaterlevelExporter to create those.
2011-05-17 Ingo Weinzierl Added a new class that supports formatters for different types of data.
2011-05-17 Ingo Weinzierl ISSUE-72 Repaired broken XPath expression in MainValuesService to extract start and end kilometer.
2011-05-17 Sascha L. Teichmann Separated the WST table loading logic from the calculations.
2011-05-17 Ingo Weinzierl Tagged RELEASE 2.3
2011-05-20 Ingo Weinzierl Tagged release 2.3.1 of flys-client.
2011-05-20 Hans Plum Reverted src/main/java/de/intevation/flys/client/client/config.xml after unintentional change
2011-05-20 Hans Plum NEWS to Release V 2.3.1
2011-05-19 Ingo Weinzierl Prepared Changes for the upcoming RELEASE 2.3.1
2011-05-19 Ingo Weinzierl ISSUE-35 The project view has a maximize button now.
2011-05-19 Ingo Weinzierl ISSUE-43 Adapted the english warning the is displayed before a language switch takes place.
2011-05-19 Ingo Weinzierl Added missing i18n strings for computed discharge curve exports.
2011-05-18 Ingo Weinzierl Added i18n strings for exports.
2011-05-17 Ingo Weinzierl Adjusted the width of an export button and added a tooltip to distinguish different exports.
2011-05-17 Ingo Weinzierl Adjusted a method signature of ClientProtocolUtils that has been changed in the last revision.
2011-05-17 Ingo Weinzierl Tagged RELEASE 2.3 of flys-client.
2012-09-28 Thomas Arendsen Hein merged flys-artifacts/2.3 2.3
2011-05-17 Ingo Weinzierl Tagged RELEASE 2.3
2011-05-16 Hans Plum Added NEWS File for collecting enduser-sepcific information for releases
2011-05-15 Sascha L. Teichmann First step to calculate "W fuer ungleichwertige Abfluesse" correctly. flys/issue55
2011-05-15 Sascha L. Teichmann Fix step to fix issue69: Do the right calculation
2011-05-13 Ingo Weinzierl Prepared Changes for the upcoming release 2.3.
2011-05-13 Ingo Weinzierl ISSUE-37 The river state wants to be rendered using a river_panel UI provider.
2011-05-12 Ingo Weinzierl Charts are generated using the size defined in the incoming request document.
2011-05-11 Ingo Weinzierl ISSUE-52 The longitudinal section charts will now always have the head of the river at the left side.
2011-05-11 Sascha L. Teichmann MetaDataService: Make incoming XML symmetric to DistanceInfoService.
2011-05-10 Ingo Weinzierl ISSUE-47 Adjusted the line color of W, Q and corrected W curves (temporarilly).
2011-05-10 Ingo Weinzierl Display gridlines in charts.
2011-05-10 Ingo Weinzierl ISSUE-53 Formatted number values of CSV exports.
2011-05-10 Ingo Weinzierl Implemented the input validation of WQ in the adapted WQ panel.
2011-05-10 Ingo Weinzierl The CSV exports will now have headers.
2011-05-10 Sascha L. Teichmann Datacage: Added river parameter to meta data services.
2011-05-10 Ingo Weinzierl Added subtitles to the available charts.
2011-05-10 Ingo Weinzierl Added a method to Resources that returns translated compound messages.
2011-05-10 Ingo Weinzierl Improved the OutGenerator interface to set a master artifact for the out generation.
2011-05-10 Ingo Weinzierl Enabled the WINFO artifact to choose between W and Q mode in the adapted wq panel of the discharge longitudinal section computation.
2011-05-09 Sascha L. Teichmann Datacage service: Cleanup served XML document.
2011-05-09 Sascha L. Teichmann Datacage: Added forgotten columns of fixation WST to datcage template.
2011-05-09 Ingo Weinzierl Enabled i18n support for charts.
2011-05-09 Ingo Weinzierl Added a CSV exporter for the discharge longitudinal section computation.
2011-05-07 Sascha L. Teichmann Back jump correction should work now for both flow directions.
2011-05-06 Sascha L. Teichmann Added data cage configuration for 'Längsschnitt'.
2011-05-06 Sascha L. Teichmann Add data cage configuration for "Abflusskurve [NN + m]".
2011-05-06 Ingo Weinzierl Added an OutGenerator to create discharge longitudinal section charts.
2011-05-06 Ingo Weinzierl Implemented methods to retrieve and compute the data used to create discharge longitudinal sections.
2011-05-05 Ingo Weinzierl Small bugfix in the adapted WQ state and further i18n strings.
2011-05-05 Ingo Weinzierl Changed the y-axis title of the computed discharge curve.
2011-05-05 Ingo Weinzierl Improved the transition model and added states to enable the 'discharge longitudinal section' computation - NOTE: the work in this computation has not finished yet.
2011-05-05 Ingo Weinzierl Use a default step width (100m) between two kilometers if no width is given.
2011-05-05 Ingo Weinzierl Fixed a potential NullPointerException while creating a longitudinal section chart.
2011-05-04 Sascha L. Teichmann fix flys/issue30
2011-05-04 Sascha L. Teichmann 'berechnete Abflusskurve': generate ws from qs
2011-05-04 Ingo Weinzierl Filled the discharge curve exporter (CSV) with code - now, it generates a CSV export with the computed discharge curve data.
2011-05-04 Ingo Weinzierl Enabled the WINFO artifact to compute the data for discharge curves (computed) - ComputedDischargeCurveGenerator uses those values now to create the chart.
2011-05-04 Ingo Weinzierl Improved the transition model and added classes to enable the WINFO artifact to create computed discharge curves - NOTE: each of the new classes is just a stub.
2011-05-03 Ingo Weinzierl Added an exporter to export the computed data of a duration curve.
2011-05-03 Ingo Weinzierl Modified a confusing debug statement.
2011-05-03 Ingo Weinzierl Added an exporter (OutGenerator) for waterlevels which currently supports CSV exports.
2011-05-03 Ingo Weinzierl Introduced an export output target on collection level that enables collections to be exported.
2011-05-03 Ingo Weinzierl I18N Bugfix.
2011-05-03 Ingo Weinzierl Added i18n strings for the location selection.
2011-05-03 Ingo Weinzierl Enabled the WINFO artifact to create duration curves - new OutGenerator, added methods for data computation.
2011-05-03 Sascha L. Teichmann visualize-transitions.xsl: State quoting was done wrong.
2011-05-02 Ingo Weinzierl Enhanced the transition model to reach a state that creates duration curves.
2011-05-02 Sascha L. Teichmann Flush/persist cache at end of program.
2011-05-02 Ingo Weinzierl The DischargeCurveGenerator uses public methods of FLYSArtifact to retrieve all necessary information of the current settings.
2011-05-02 Sascha L. Teichmann Moved expensive allocation of result arrays out of km loop.
2011-05-02 Ingo Weinzierl Enabled the FLYSArtifact to handle an array of inserted WQ values (without given ranges).
2011-05-02 Sascha L. Teichmann Repaired DischargeTables.getQForW()
2011-05-02 Ingo Weinzierl Enabled the server to handle longitudinal section chart requests with inserted W data - Ws are transformed into Qs then.
2011-05-02 Ingo Weinzierl Removed an unused parameter from DischargeTables.getQForW().
2011-05-02 Ingo Weinzierl Ws and Qs of a longitudinal section chart are mapped to an own range axis now.
2011-05-01 Sascha L. Teichmann Added caching support for the wst value tables.
2011-04-29 Sascha L. Teichmann Added ehcache support.
2011-04-29 Sascha L. Teichmann Added meta data service.
2011-04-29 Sascha L. Teichmann Added meta service stub. TODO: Add meta data builder.
2011-04-29 Ingo Weinzierl Bugfix: Changed the datastructure of the ThemeList (inner class of FLYSArtifactCollection) to store the theme of a chart in an ordered list -> Q curves of longitudinal section charts are now drawn.
2011-04-29 Ingo Weinzierl Implemented the chart creation of a longitudinal section chart - W and Q facets.
2011-04-29 Ingo Weinzierl Improved the calculation of the step width of ranges.
2011-04-29 Ingo Weinzierl New method WQKms.size() to retrieve the number of elements in the data pool.
2011-04-29 Sascha L. Teichmann WQKms model: Added a get() method which takes destination array as an argument.
2011-04-29 Ingo Weinzierl Introduced GNU Trove to store WQKms values in a more performant data structure.
2011-04-29 Ingo Weinzierl Added the name of the facet to the parameterlist of OutGenerator.doOut().
2011-04-29 Ingo Weinzierl Added themes and mappings for the W and Q theme of a longitudinal section curve.
2011-04-29 Ingo Weinzierl Added necessary methods to start the computation of waterlevel data.
2011-04-29 Ingo Weinzierl Introduced a model class to store a set of triple data objects that consist of W, Q and Kms information.
2011-04-29 Ingo Weinzierl Bugfix: Removed endless loop and a bug while iterating over Hibernate results.
2011-04-28 Ingo Weinzierl Added an OutGenerator for creating longitudinal section curves.
2011-04-28 Ingo Weinzierl Bugfix: Added missing <output-generators> section to the global configuration.
2011-04-28 Ingo Weinzierl Added a further state that is reached if the waterlevel calculation mode has been chosen.
2011-04-28 Ingo Weinzierl Added a new Transition to compare values.
2011-04-28 Ingo Weinzierl Bugfixes: Adapted a broken method call of TransitionEngine.isStateReachable() and added the outputs of a current state to the DESCRIBE.
2011-04-28 Ingo Weinzierl Bugfix: Added the missing init() method to a Transition and call it in the TransitionFactory after a Transition has been created.
2011-04-28 Ingo Weinzierl Bugfix: The outputs of a Collection's attribute document are stored in an outputs node now instead of being stored toplevel in the document.
2011-04-28 Ingo Weinzierl Throw an illegal argument exception in LocationDistanceSelect.validate() and WQSelect.validate() if no data has been inserted so far.
2011-04-28 Sascha L. Teichmann Added XSL transformation do create Graphviz digraph out of conf.xml
2011-04-28 Ingo Weinzierl The OutGenerator gets the theme of a facet while output creation.
2011-04-27 Ingo Weinzierl Removed useless imports.
2011-04-27 Ingo Weinzierl Added an abstract OutGenerator that should be the base class for all generators which create charts.
2011-04-27 Ingo Weinzierl Improved the out() operation of a Collection - the OutGenerator gets to know about the facets and its theme.
2011-04-26 Ingo Weinzierl The Attributes of a collection are written into its DESCRIBE now.
2011-04-26 Ingo Weinzierl Initialized the facet2theme mappings configured in themes.xml and added a function to the ThemeFactory that retrieves a theme from FLYSContext based on its name.
2011-04-22 Sascha L. Teichmann Corrected a silly c&p mistake.
2011-04-22 Sascha L. Teichmann Implementation of the "Ruecksprungkorrektur" to be done in "W fuer angepassten Abflusslaengschnitt".
2011-04-21 Ingo Weinzierl Removed debug code that has been commited by accident.
2011-04-21 Ingo Weinzierl Added a first small theme configuration and code to read it.
2011-04-21 Ingo Weinzierl Implementation of interfaces and its default implementations and a factory to work with themes.
2011-04-20 Sascha L. Teichmann Implementation of "Abflusskurve/Abflusstafel" calculation.
2011-04-20 Sascha L. Teichmann Added dependency to Apache Commons Math 2.2 (Apache License 2.0)
2011-04-20 Sascha L. Teichmann Discharge table: Fix problem when sorting by q (copied w instead of q).
2011-04-20 Ingo Weinzierl Fixed broken HQL statement.
2011-04-19 Sascha L. Teichmann Implemented the "Wasserstand/Wasserspiegellagen" calculation.
2011-04-19 Sascha L. Teichmann Discharge table: we need a getQForW() and not a getWForQ().
2011-04-19 Sascha L. Teichmann Discharge tables: Sorting of q values was done wrong.
2011-04-19 Ingo Weinzierl The list of annotations returned by the AnnotationFactory is ordered by its range.
2011-04-19 Ingo Weinzierl Added a service that returns the MainValues of a Gauge based on a river name and a stationing.
2011-04-19 Ingo Weinzierl Added a factory that returns MainValues.
2011-04-19 Sascha L. Teichmann Discharge table: Added static method getWForQ() to interpolate a w value for a given q value based on a given discharge table.
2011-04-19 Sascha L. Teichmann Discharge tables: Added convenience constructors/methods to ease the access to the master discharge table of a gauge.
2011-04-18 Sascha L. Teichmann Moved the query complexity of creating a w/q value table into view
2011-04-18 Sascha L. Teichmann Fetches w/q value tables from the backend.
2011-04-18 Ingo Weinzierl Changed the error key that is written to the result document of the feed operation.
2011-04-18 Ingo Weinzierl The inserted river is validated in the feed operation().
2011-04-18 Ingo Weinzierl The calculation method is validated in the feed() operation.
2011-04-18 Ingo Weinzierl The inserted ranges (distance and WQ ranges) are validated in the feed() operation.
2011-04-18 Ingo Weinzierl Removed testing code that has been comitted by accident in the last revision.
2011-04-18 Ingo Weinzierl The getGauge() method of the FLYSArtifact returns the first gauge based on the given stationing now.
2011-04-15 Ingo Weinzierl The WQ state fills the DESCRIBE with default values for W and Q.
2011-04-15 Ingo Weinzierl Added a WstFactory to return Wst objects.
2011-04-15 Ingo Weinzierl FLYSArtifact provides methods to retrieve the real River, Gauge objects.
2011-04-15 Ingo Weinzierl Bugfix: repaired broken imports of the session holder.
2011-04-15 Ingo Weinzierl Removed the SessionHolder and adapted imports.
2011-04-14 Sascha L. Teichmann Acquire/release sessions in services to avoid db connection leaks.
2011-04-14 Ingo Weinzierl The location/distance state now writes default values into DESCRIBE.
2011-04-14 Ingo Weinzierl Added a new function to RiverFactory that retrieves a River object based on a given river name.
2011-04-14 Sascha L. Teichmann Backend access: Static methods are using the SessionHolder, too.
2011-04-14 Ingo Weinzierl Finalized the SessionCallContextListener and registered it as CallContext.Listener in the configuration.
2011-04-14 Ingo Weinzierl Bugfix: Call correct method to retrieve and initialize an instance of SessionFactoryProvider.
2011-04-14 Sascha L. Teichmann Added a session holder to hold hibernate sessions.
2011-04-14 Ingo Weinzierl Added an Implementation of CallContext.Listener to open/close Hibernate Sessions for each request.
2011-04-14 Ingo Weinzierl Modified the states' describe() method - related to the last commit.
2011-04-14 Ingo Weinzierl Removed the state to explicitly select a gauge.
2011-04-13 Ingo Weinzierl Bugfix: Repaired the dynamic UI part of the RiverSelect state in DESCRIBE.
2011-04-12 Ingo Weinzierl Write the name of an artifact into the DESCRIBE document.
2011-04-12 Ingo Weinzierl Bugfix: States are filled with data before they describe themself.
2011-04-11 Ingo Weinzierl Implemented a service that retrieves distance information for a specific river.
2011-04-06 Ingo Weinzierl The FLYSArtifactCollection overrides out() and uses OutGenerators to create output for this operation.
2011-04-06 Ingo Weinzierl Added a DischargeCurveGenerator that creates discharge curves.
2011-04-06 Ingo Weinzierl Changed the visibility of getData() method of FLYSArtifacts.
2011-04-03 Sascha L. Teichmann Removed trailing whitespace.
2011-04-03 Sascha L. Teichmann Make project compilable again.
2011-03-31 Ingo Weinzierl Added code to parse the configured OutGenerators in the global configuration and to save a map of such in the FLYSContext.
2011-03-31 Ingo Weinzierl Added an OutGenerator interface that might be used to generator collected outputs of a set of artifacts.
2011-03-30 Ingo Weinzierl Removed the Backend reference from FLYSArtifactCollection.
2011-03-30 Ingo Weinzierl Enhanced the output mode for discharge curves with three facets.
2011-03-30 Ingo Weinzierl Tagged RELEASE 0.1 of FLYS Artifacts.
2011-05-17 Ingo Weinzierl Tagged RELEASE 2.3 of flys-client.
2011-05-16 Hans Plum Added missing information for release
2011-05-16 Hans Plum Added NEWS File for collecting enduser-sepcific information for releases
2011-05-13 Ingo Weinzierl Prepared Changes for the upcoming release 2.3.
2011-05-13 Sascha L. Teichmann Datacage: Better converter for incoming XML tree
2011-05-12 Raimund Renkert ISSUE 61: Changed datacage button style.
2011-05-12 Raimund Renkert ISSUE 46: Removed the table header context menu.
2011-05-12 Raimund Renkert ISSUE 43: Changed i18n strings.
2011-05-12 Raimund Renkert Show rivers as links instead of a combobox.
2011-05-12 Ingo Weinzierl ISSUE-15 The charts in the chart panel are requested with the size of the parent panel.
2011-05-12 Ingo Weinzierl Enabled the client to request charts in different sizes.
2011-05-12 Ingo Weinzierl ISSUE-34 Limit the windows which are moved to the right lower corner to 10.
2011-05-11 Sascha L. Teichmann Datacage: transport rpc result to ui.
2011-05-11 Ingo Weinzierl Changed the height of the export panel.
2011-05-11 Sascha L. Teichmann UI stub for data cage
2011-05-11 Ingo Weinzierl ISSUE-56 Display download buttons to export the computed data.
2011-05-11 Ingo Weinzierl Added a service to export data from the artifact server.
2011-05-11 Raimund Renkert ISSUE 34: Move every new project window 20 px down and right.
2011-05-11 Raimund Renkert ISSUE 44: Moved the location/range and WQ input tables to the helper panel and
2011-05-11 Raimund Renkert Set the computation result panel width and height to 100%.
2011-05-11 Ingo Weinzierl Parse the facets of a Collection and distinguish between an ordinary OutputMode and an ExportMode (new).
2011-05-11 Ingo Weinzierl ISSUE-41 Moved the panel that shows the computation results right beside the parameterization - NOTE: issue is still open.
2011-05-11 Ingo Weinzierl ISSUE-57 Replaced wrong i18n function call.
2011-05-10 Ingo Weinzierl ISSUE-48 Added placeholder for the toolbar and the theme control in the chart output tab.
2011-05-10 Ingo Weinzierl ISSUE-38 Set the first value of a select box as default value.
2011-05-10 Ingo Weinzierl Added i18n error messages used in the adapted wq panel.
2011-05-10 Raimund Renkert Changed the empty table message for the WQ input table.
2011-05-10 Raimund Renkert Changed the empty table message for helper and data tables.
2011-05-10 Sascha L. Teichmann Added stub for meta data service.
2011-05-10 Raimund Renkert Fixed the location input. A range selection sets the correct location values
2011-05-10 Raimund Renkert Remove the data table on step back.
2011-05-10 Raimund Renkert Build a dynamic table for the CSV data.
2011-05-10 Ingo Weinzierl Fixed attributes/namespaces in the XML document that is used to fetch the CSV export of WINFO computations.
2011-05-09 Ingo Weinzierl Fixed a broken dependency in the maven pom file.
2011-05-09 Raimund Renkert Added table and service for calculation output to UI.
2011-05-09 Ingo Weinzierl Added radio buttons to choose between W/Q modes in the adapted WQ panel.
2011-05-09 Ingo Weinzierl Bugfix: the current locale string is used to fetch chart images now.
2011-05-09 Ingo Weinzierl Added a doubleclick listener to the project list to open a project.
2011-05-09 Sascha L. Teichmann Removed superfluous imports.
2011-05-09 Ingo Weinzierl Changed the wording when speaking about kilometer ranges.
2011-05-05 Raimund Renkert Enable or disable table rows depending on the WQ selection.
2011-05-05 Raimund Renkert Implemented handler for WQ value selection.
2011-05-05 Raimund Renkert Added table for WQ inputs.
2011-05-05 Ingo Weinzierl Implemented the createOld() of WQAdaptedInputPanel.
2011-05-05 Ingo Weinzierl The WQAdaptedInputPanel displays input fields for each gauge and returns the correct w/q values now.
2011-05-04 Raimund Renkert Added new WQ info service and data structures.
2011-05-04 Raimund Renkert Do not update the locations table if no data is cached.
2011-05-04 Ingo Weinzierl Added a stub implementation of a WQ panel for discharge longitudinal section computations.
2011-05-04 Raimund Renkert Fixed the single location input panel.
2011-05-04 Ingo Weinzierl Renamed non-computed discharge curve outputs.
2011-05-04 Ingo Weinzierl Added i18n strings for the computed discharge curve.
2011-05-03 Ingo Weinzierl Added new i18n strings for new output modes.
2011-05-03 Raimund Renkert Added new UI provider for single location selection.
2011-05-02 Raimund Renkert Cash the table data and rebuild the location table on distance selection.
2011-05-02 Ingo Weinzierl Introduced two further parameters in the WQ panel to determine the selection mode (range/single, w/q).
2011-05-02 Raimund Renkert Added location and distance tables.
2011-05-02 Ingo Weinzierl Bugfix: the WQ panel now returns the correct step width value if the range mode is selected.
2011-04-29 Raimund Renkert Prepared UI elements for the location and distance input tables.
2011-04-28 Ingo Weinzierl Added i18n strings for a longitudinal section curve.
2011-04-28 Raimund Renkert Added class diagrams for the client ui.
2011-04-18 Ingo Weinzierl Added error messages that are displayed during the feed operation.
2011-04-14 Ingo Weinzierl Each service is now called with the name of the current locale to set the request object's locale manually in the HttpClient.
2011-04-12 Ingo Weinzierl The title of a the ParameterList tab depends on the Artifact's name if we create a new project window with an existing Artifact.
2011-04-12 Ingo Weinzierl We can now distinuish between different artifact types based on its name in the DESCRIBE. The ArtifactCreator returns concrete instances of Artifacts now.
2011-04-12 Ingo Weinzierl The project list is sorted now.
2011-04-12 Ingo Weinzierl Filled the context menu point 'Open project' of the ProjectList with life - it opens a new window displaying the parameterization of the selected project.
2011-04-12 Ingo Weinzierl Improved the CollectionView and the ParameterList - both can be initialized with an existing artifact (parameterization).
2011-04-12 Ingo Weinzierl Added more i18n error messages.
2011-04-12 Ingo Weinzierl The CollectionRecord implements a method that returns the Collection objects which is represented by the record now.
2011-04-12 Ingo Weinzierl Added a new service to query an artifact description.
2011-04-11 Ingo Weinzierl Implemented a context menu for the project list.
2011-04-11 Ingo Weinzierl Implemented a service to fetch distance information of a river from the artifact server.
2011-04-11 Ingo Weinzierl Added a model class that represents a distance information.
2011-04-08 Ingo Weinzierl Improved the exception handling - added warnings for user authentication errors and errors that occur while fetching supported rivers.
2011-04-08 Ingo Weinzierl Added an exception class that should be used if the user authentication fails.
2011-04-08 Ingo Weinzierl Improved the exception handling of artifact / collection specific operations. Warning dialog are displayed after such an exception.
2011-04-08 Ingo Weinzierl Added a new exception class that is used to be thrown after artifact / collection operation specific errors.
2011-04-07 Ingo Weinzierl The ChartOutputTab calls the out() operation of a Collection now - no longer the out() of its first artifact.
2011-04-07 Ingo Weinzierl Fixed the function to toggle the language and added a warning dialog that informs the user about the creation of a new session.
2011-04-05 Ingo Weinzierl Removed the FLYSMessages interface and replaced it with a FLYSConstants interface - this interface has the ability to lookup i18n strings with given keys.
2011-04-05 Ingo Weinzierl Implemented the button to toggle the current locale.
2011-04-05 Ingo Weinzierl Added missing i18n footer strings.
2011-03-30 Ingo Weinzierl Tagged RELEASE 0.1 of FLYS Client.
2012-09-28 Thomas Arendsen Hein merged flys-backend/0.1 0.1
2011-03-28 Sascha L. Teichmann Fixed swap of operands in importer.
2011-03-28 Sascha L. Teichmann Forgot to save the last change before commit.
2011-03-28 Sascha L. Teichmann Added methods to find out if two ranges intersects.
2011-03-24 Sascha L. Teichmann Added an one to many relation to the discharge tables of a gauge.
2011-03-23 Sascha L. Teichmann Finished import of WSTs.
2011-03-23 Sascha L. Teichmann Build models for wsts, wst columns and q ranges and store them in the backend.
2011-03-23 Sascha L. Teichmann Add a hack to repair the units in WST files extraction.
2011-03-22 Sascha L. Teichmann Ported over some WST parsing stuff from desktop flys
2011-03-22 Ingo Weinzierl Added import code for importing discharge tables.
2011-03-22 Sascha L. Teichmann Added stub for WST parser.
2011-03-22 Sascha L. Teichmann Added importer helper model stubs for WST imports.
2011-03-21 Sascha L. Teichmann Second part of parsing/storing main values. Should be finished now.
2011-03-21 Sascha L. Teichmann Fixed wrong unique constraint.
2011-03-21 Sascha L. Teichmann Add forgotten column river_id in Gauges.
2011-03-21 Sascha L. Teichmann Added missing ImportGauge.getPeer() method
2011-03-21 Sascha L. Teichmann Propagate river into storing of gauges.
2011-03-21 Sascha L. Teichmann Added stub code to write gauges
2011-03-18 Sascha L. Teichmann First part of parsing main values.
2011-03-18 Sascha L. Teichmann Store annotations in backend.
2011-03-17 Sascha L. Teichmann Importer: Bound Attributes and Positions to there backend peers.
2011-03-17 Sascha L. Teichmann Added parser to read *.KM files.
2011-03-17 Sascha L. Teichmann Added new helper models for import.
2011-03-17 Sascha L. Teichmann Added parsing of PEGEL.GLT files.
2011-03-17 Sascha L. Teichmann Importer: Used thread local pattern to make sharing of session easier.
2011-03-17 Sascha L. Teichmann Importer: Fixed error in HQL statement.
2011-03-17 Sascha L. Teichmann Commented out a debug block because it leaks the db password.
2011-03-16 Sascha L. Teichmann Store imported rivers into database. Needs testing!
2011-03-16 Sascha L. Teichmann Default connection parameters are now overwritable with system properties.
2011-03-16 Sascha L. Teichmann Expose the creation of the SessionFactory to the public to
2011-03-16 Sascha L. Teichmann Importer: Added info gew parser.
2011-03-15 Sascha L. Teichmann SessionFactoryProvider for access to the backend.
2011-03-15 Sascha L. Teichmann Added dependency to artifacts-commons to be able to use the global configuration of the artifact database.
2011-03-15 Sascha L. Teichmann Added foreign key constraint annotations to model classes.
2011-03-14 Sascha L. Teichmann Fixed wrong spelled column references in foreign keys introduces with last change.
2011-03-14 Sascha L. Teichmann Added column annotations for simple fields. TODO: foreign keys.
2011-03-14 Sascha L. Teichmann Added entity and id annotations.
2011-03-14 Sascha L. Teichmann Added missing sequences. Deleted unsupported sqlite schema.
2011-03-11 Sascha L. Teichmann Bound Apache Commons DBCP with Hibernate.
2011-03-11 Sascha L. Teichmann More Hibernate/JPA stuff
2011-03-10 Sascha L. Teichmann Added POJOs to be mapped to schema.
2011-03-09 Sascha L. Teichmann Added dependency Hibernate Core 3.6.1 Final
2011-03-09 Sascha L. Teichmann Created a new empty maven project
2011-03-09 Sascha L. Teichmann Converted schema to be PostgreSQL compatible.
2011-03-09 Sascha L. Teichmann Factorized time intervals out into a separated table.
2011-02-22 Sascha L. Teichmann Initial database import scripts. Not finished, yet.
2011-02-10 Sascha L. Teichmann Initial check in of the FLYS database backend.
2012-09-28 Thomas Arendsen Hein merged flys-artifacts/0.1
2011-03-30 Ingo Weinzierl Renamed an output mode in the WINFO artifact configuration.
2011-03-29 Ingo Weinzierl Changed a german string in the resource bundle.
2011-03-29 Ingo Weinzierl Adapted the available calculation modes of WINFO and its order in the DESCRIBE document.
2011-03-28 Ingo Weinzierl Added the hash code of an artifact to the artifact part of the collection's DESCRIBE document.
2011-03-28 Ingo Weinzierl Changed the background color of discharge curves to white.
2011-03-28 Sascha L. Teichmann DischargeTables: Cache the scale, too. Otherwise two calls to getValues() with different arguments will result in the same output.
2011-03-28 Ingo Weinzierl The out() operation of the WINFO artifact draws discharge tables for gauges specified by the user.
2011-03-28 Ingo Weinzierl Added a helper class to export charts.
2011-03-28 Sascha L. Teichmann Add factory to fetch gauges from database and filter them
2011-03-25 Sascha L. Teichmann Don't used interleaved x/y data.
2011-03-25 Ingo Weinzierl Updated the TODO list.
2011-03-25 Ingo Weinzierl Bugfix: Added a missing artifact namespace prefix in the DESCRIBE document of a FLYSArtifactCollection.
2011-03-24 Ingo Weinzierl Implemented a FLYSArtifactCollection that will be used in this application now.
2011-03-24 Sascha L. Teichmann Fetch w/q values of discharge tables for given gauges.
2011-03-24 Ingo Weinzierl Added a further german resource bundle.
2011-03-23 Ingo Weinzierl The DESCRIBE of the WINFO artifact contains the available output modes now.
2011-03-22 Ingo Weinzierl The location_distance state of the WINFO parameterization has an output mode 'discharge_table' now.
2011-03-21 Ingo Weinzierl Append human readable strings of the selected values to the DESCRIBE output.
2011-03-21 Ingo Weinzierl Added some more calculation types (to the DESCRIBE in the calculation select state).
2011-03-21 Ingo Weinzierl Implemented the step-back part of the advance() operation.
2011-03-21 Ingo Weinzierl Fixed a german umlaut.
2011-03-18 Ingo Weinzierl Added new states to insert location/distance and w/q data in the config of a WINFO artifact.
2011-03-18 Ingo Weinzierl Added a new state for the W/Q input in the WINFO parameterization.
2011-03-18 Ingo Weinzierl New state for the location/distance input and some litte modifications of the DefaultState.
2011-03-17 Ingo Weinzierl Added a method to retrieve the UIProvider for a state.
2011-03-17 Ingo Weinzierl Let the states describe the static ui part.
2011-03-17 Ingo Weinzierl The 'rivers' service retrieves the rivers from backend now.
2011-03-17 Sascha L. Teichmann Added support for the flys backend and an example how to use it.
2011-03-15 Sascha L. Teichmann Added section in configuration for database backend.
2011-03-15 Sascha L. Teichmann Fixed build error coming from different import of XMLUtils.
2011-03-14 Ingo Weinzierl Appended a missing node to the DESCRIBE.
2011-03-14 Ingo Weinzierl I18N of strings for the DESCRIBE document.
2011-03-14 Ingo Weinzierl Introduced a state to select the calculation mode.
2011-03-14 Ingo Weinzierl Added an abstract base class DefaultState for States.
2011-03-14 Ingo Weinzierl Implemented a singleton instance that provides i18n strings.
2011-03-10 Ingo Weinzierl Appende the static data to the static node of the DESCRIBE document.
2011-03-10 Ingo Weinzierl The operations feed() and advance() return the current description of the artifact now.
2011-03-10 Ingo Weinzierl Implemented the step-forward part of the advance operation.
2011-03-09 Ingo Weinzierl Implemented the feed() operation.
2011-03-09 Ingo Weinzierl Added a TODO file.
2011-03-09 Ingo Weinzierl Added a FLYSArtifact that serves as the default artifact for the FLYS application.
2011-03-08 Ingo Weinzierl Added a RiverService (/service/rivers) that retrieves a list of provided rivers.
2011-03-07 Ingo Weinzierl Added a nodes for the user-factory and collection-factory to the configuration.
2011-03-01 Ingo Weinzierl Replaced the 'special' attribute of the DESCRIBE with a 'uiprovider' attribute.
2011-02-08 Ingo Weinzierl The RiverSelect state creates the dynamic UI part for the describe document now.
2011-02-08 Ingo Weinzierl Added mockup classes for working with rivers.
2011-02-07 Ingo Weinzierl The input data items of a state are read from configuration after the state has been setup.
2011-02-07 Ingo Weinzierl Added the current state and reachable states description to the describe document of the WINFO artifact.
2011-02-07 Ingo Weinzierl Changed the way of storing transitions in the TransitionEngine.
2011-02-04 Ingo Weinzierl Improved the WINFO artifact. Describe() returns the uuid and the hash of the artifact instead of just nothing.
2011-02-04 Ingo Weinzierl Improved the init process of the WINFOArtifact - there are two new states to select the river and the gauge.
2011-02-04 Ingo Weinzierl Added missing StateFactory class of the last commit.
2011-02-04 Ingo Weinzierl Improved the bootstrap process - the states are initialized.
2011-02-03 Ingo Weinzierl Initializes a TransitionEngine storing all transitions for each artifact at the application start.
2011-02-02 Ingo Weinzierl Added a first stub of an WINFO artifact.
2011-02-01 Sascha L. Teichmann Added initial mvn project for FLYS artifacts.
2011-03-30 Ingo Weinzierl Removed some out commented code that have been commited by mistaken.
2011-03-30 Ingo Weinzierl Improved the way how to i18n strings in our application.
2011-03-30 Ingo Weinzierl Removed useless imports.
2011-03-30 Ingo Weinzierl Bugfix: A collection view just creates a single time a new collection - even if we step back to a previous state and go forward afterwards.
2011-03-30 Ingo Weinzierl Added a new service to describe collections.
2011-03-30 Ingo Weinzierl Replaced a german string in the ProjectList.
2011-03-29 Ingo Weinzierl Integrated the ProjectList into the client. Now, the Collections of a user are displayed in the list.
2011-03-29 Ingo Weinzierl Added a service that returns the collections of a specified user.
2011-03-29 Ingo Weinzierl A collection provides a method to retrieve its creation time now.
2011-03-29 Raimund Renkert Fixed some issues.
2011-03-29 Raimund Renkert Added style information to avoid body margin.
2011-03-29 Raimund Renkert Changed some german strings.
2011-03-29 Raimund Renkert Resized CollectionView and set the content size to have a tabled style.
2011-03-29 Ingo Weinzierl The title of the parameter tab will change after the module has been selectd.
2011-03-29 Ingo Weinzierl Modified the URL of the 'back button' image.
2011-03-29 Raimund Renkert Fixed toggle method.
2011-03-28 Ingo Weinzierl Bugfix: Step back will remove duplicated output tab and an extended chart image URL bypasses the browser cache.
2011-03-28 Ingo Weinzierl Added a further plugin in the module selection and changed its alignment to vertical.
2011-03-28 Ingo Weinzierl Removed a label from ChartOutputTab.
2011-03-28 Ingo Weinzierl Removed the title (date string) of CollectionViews.
2011-03-28 Ingo Weinzierl Improved the positioning of helper widgets and some layout specific stuff.
2011-03-28 Raimund Renkert The project list button toggles the project list now.
2011-03-28 Raimund Renkert Replaced next button image with smart gwt button.
2011-03-28 Raimund Renkert Added footer and a spacer to the webpage layout.
2011-03-28 Raimund Renkert Customized background and ProjectList styles.
2011-03-28 Ingo Weinzierl Added a service that builds up requests to retrieve chart images. Use this service to display charts in the ChartOutputTab.
2011-03-28 Raimund Renkert Limited the area for CollectionView to the size of FLYSWorkspace.
2011-03-28 Ingo Weinzierl Fixed a typo.
2011-03-28 Ingo Weinzierl Added a panel that will be used to display chart output.
2011-03-28 Ingo Weinzierl Available output modes are displayed in the tab bar of the collection view.
2011-03-28 Ingo Weinzierl Moved parameterization specific code from CollectionView to ParameterList.
2011-03-26 Ingo Weinzierl Moved ParameterList specific code into the ParameterList.
2011-03-25 Ingo Weinzierl Adjusted the return type of the CreateCollectionService and added code to react on Collection changes (like output modes).
2011-03-25 Ingo Weinzierl Made the AddArtifactService accessible in the web.xml
2011-03-25 Ingo Weinzierl Added a service to add artifacts to collections.
2011-03-25 Raimund Renkert Changed theme to smartgwt Enterprise Blue.
2011-03-25 Ingo Weinzierl Added CollectionItems and Facets and replaced Artifact references in Collection with CollectionItems.
2011-03-24 Raimund Renkert Customized style for header and mainmenu.
2011-03-23 Ingo Weinzierl The output modes of an artifact are extracted from DESCRIBE document and put into the ArtifactDescription.
2011-03-23 Ingo Weinzierl Enhanced the ArtifactDescription and its default implementation to provide output modes.
2011-03-23 Ingo Weinzierl Added an interface and its default implementation to describe an output mode of an artifact.
2011-03-21 Ingo Weinzierl Moved image sources to an own directory to avoid that those files are included in the web application archive.
2011-03-21 Ingo Weinzierl Display human readable strings of the selected values in the UI.
2011-03-21 Ingo Weinzierl Implemented a mechanism to step back to previous states.
2011-03-18 Ingo Weinzierl Save the data explicitly in the LocationDistancePanel and WQInputPanel before returning the user input to avoid a nullpointer exception.
2011-03-18 Ingo Weinzierl The 'old' items in the parameter panel have a button to step back to a previous state (NOTE: just the UI stuff is implemented now).
2011-03-18 Ingo Weinzierl Adjusted the look of the 'next' button in the parameter panel.
2011-03-18 Ingo Weinzierl Read min/max values for the distance modes in WQInputPanel.
2011-03-18 Ingo Weinzierl Read min/max values for the distance mode in the LocationDistancePanel.
2011-03-18 Ingo Weinzierl Remove the dynamic parameter panel if a state is reached that doesn't need any user input.
2011-03-17 Ingo Weinzierl The widgets in the static part of the parameter panel are created using UIProviders now. The ParameterList does not build widgets any longer.
2011-03-17 Ingo Weinzierl The DataList has a label now.
2011-03-17 Ingo Weinzierl Introduced a data structure DataList to manage to list of Data objects of a single state.
2011-03-17 Ingo Weinzierl Added space between old params panel and new params panel.
2011-03-17 Ingo Weinzierl Some refactoring (imports, etc).
2011-03-17 Ingo Weinzierl Render the Single-W panel initially when the WQInputPanel is rendered.
2011-03-17 Ingo Weinzierl Implemented the getData() method of the WQInputPanel.
2011-03-17 Ingo Weinzierl Implemented the getData() method of the LocationDistancePanel.
2011-03-17 Ingo Weinzierl Some GUI improvements in the Location/Distance, W/Q and Module panels.
2011-03-17 Ingo Weinzierl Enhanced the UIProviderFactory.
2011-03-16 Ingo Weinzierl Refactored the LocationDistancePanel, so that is uses the DoubleArrayPanel and DoubleRangePanel from the last commit as well.
2011-03-16 Ingo Weinzierl Added a new widget to enter w/Q values in single and range mode.
2011-03-16 Ingo Weinzierl Added a new widget that enables the user to enter a location or a distance in a single step.
2011-03-15 Ingo Weinzierl Clear the panel that displays the current input widget before adding a new item to this panel.
2011-03-15 Ingo Weinzierl Implemented the step forward mechanism in the CollectionView and added the river map to the initial widget.
2011-03-14 Ingo Weinzierl Some improvements for displaying old parameters.
2011-03-14 Ingo Weinzierl Read i18n strings from DESCRIBE document and display those values in the UI.
2011-03-10 Ingo Weinzierl CollectionView implements HasParameterChangeHandler and ParameterChangeHandler interfaces.
2011-03-10 Ingo Weinzierl Bugfix: Removed static string from GUI element.
2011-03-10 Ingo Weinzierl Parse static data from DESCRIBE.
2011-03-10 Ingo Weinzierl Added a listener mechanism to notify listeners when the parameterization of a Collection/Artifact changed.
2011-03-10 Ingo Weinzierl Added a service for the ADVANCE operation and a service that bundles FEED and ADVANCE in a single service.
2011-03-09 Ingo Weinzierl Removed the GreetingService - was added initially while repository creation.
2011-03-09 Ingo Weinzierl Added a new widget that combines the module and the river selection. Users can now choose the desired plugin and river in one step.
2011-03-09 Ingo Weinzierl Added a service to list the supported rivers of the artifact server. The FLYS instance serves a method that retrieves this list.
2011-03-08 Ingo Weinzierl Improved the main menu - added further buttons (clickable labels).
2011-03-08 Ingo Weinzierl Integrated a header that contains a FLYS and a BfG logo.
2011-03-07 Ingo Weinzierl Implemented a service that triggers the artifact-collection creation in the artifact server.
2011-03-07 Ingo Weinzierl Added a User interface and a default implementation to handle users in this client.
2011-03-02 Sascha L. Teichmann Added missing SmartGWT repository.
2011-02-22 Ingo Weinzierl The CollectionView is able to create new instances of a WINFO artifact and to display the artifact's state.
2011-02-22 Ingo Weinzierl Implemented code to parse the UIProvider that should be used for a current state.
2011-02-22 Ingo Weinzierl Added event logic to enable step forward.
2011-02-22 Ingo Weinzierl Added UIProviders that are used to create widgets for entering data.
2011-02-21 Ingo Weinzierl The CollectionView implements the HasCollectionChangeHandlers interface now.
2011-02-18 Ingo Weinzierl Implemented a mechanism to listen to Collection changes.
2011-02-18 Ingo Weinzierl Enhanced the Collection and its default implementation.
2011-02-18 Ingo Weinzierl The DESCRIBE document returned by the artifact server is parsed after calling create() of the artifact service and a new Artifact is created with an ArtifactDescription that contains the UUID, HASH, und the current Data.
2011-02-18 Ingo Weinzierl Added missing pom.xml and ChangeLog modifications of the last commit.
2011-02-17 Ingo Weinzierl Integrated the httpclient for the communication between client and server. It is now possible to create a new WINFO artifact.
2011-02-17 Ingo Weinzierl Enhanced the CollectionView: there are radio buttons for each module and a button to select one of those.
2011-02-17 Ingo Weinzierl Adjusted interfaces used for the ArtifactDescription and added default implementations.
2011-02-16 Ingo Weinzierl Added interfaces and a stub implementation of an artifact service the should provide the methods for communicating with the artifact server.
2011-02-16 Ingo Weinzierl Modified the Artifact interface and added a DefaultArtifact implementation.
2011-02-16 Ingo Weinzierl Added a global configuration for the client and classes providing methods to retrieve these information.
2011-02-11 Ingo Weinzierl Added interfaces for Artifacts, its ArtifactDescription and Data.
2011-02-11 Ingo Weinzierl Radio buttons for each plugin are displayed if a new CollectionView is created.
2011-02-11 Ingo Weinzierl Added a workspace that handles the collection windows. New button to open a new collection.
2011-02-11 Ingo Weinzierl Added a new method that returns the UUID of a Collection.
2011-02-10 Ingo Weinzierl Implemented a ProjectList and added a mockup that displays two collections in that list.
2011-02-10 Ingo Weinzierl Added an interface and a default implementation of a Collection.
2011-02-10 Ingo Weinzierl Introduced a service that retrieves the user who is currently logged in. This user is displayed in the menu bar.
2011-02-09 Ingo Weinzierl Removed useless auto generated classes and added first ui elements with i18n support.
2011-02-08 Ingo Weinzierl Start of a GWT based client for FLYS-3.0

http://dive4elements.wald.intevation.org