Mercurial > dive4elements > river

log

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
less more | rev 8006: (0) -1024 +1024 tip
age author description
Thu, 03 Jul 2014 13:27:14 +0200 Raimund Renkert Avoid NPE if some meta data does not exist. facet-metadata
Thu, 03 Jul 2014 12:31:13 +0200 Raimund Renkert Added i18n strings for middle bedheights. facet-metadata
Thu, 03 Jul 2014 12:30:41 +0200 Raimund Renkert Added macro for middle bedheights for old calculations. facet-metadata
Thu, 03 Jul 2014 11:34:46 +0200 Raimund Renkert Added i18n strings. facet-metadata
Thu, 03 Jul 2014 11:34:30 +0200 Raimund Renkert Removed unused imports and avoid using RiverUtils. facet-metadata
Thu, 03 Jul 2014 11:33:41 +0200 Raimund Renkert Fixed NPE when loading folders from datacage. facet-metadata
Thu, 03 Jul 2014 11:32:22 +0200 Raimund Renkert Translate csv meta data lines in middle bed height chart export. facet-metadata
Thu, 03 Jul 2014 11:31:26 +0200 Raimund Renkert Add river elevation model to middle bed height csv export. facet-metadata
Thu, 03 Jul 2014 11:30:19 +0200 Raimund Renkert Fixed i18n strings. facet-metadata
Thu, 03 Jul 2014 11:27:41 +0200 Raimund Renkert Add river elevation model to bed diff chart export. facet-metadata
Wed, 02 Jul 2014 16:35:23 +0200 Tom Gottfried Allow building Release from specific branch. Beware that branches to not get different ports automatically.
Wed, 02 Jul 2014 15:54:23 +0200 Raimund Renkert Added missing facet. facet-metadata
Wed, 02 Jul 2014 14:42:43 +0200 Raimund Renkert Add meta data to middle bed height CSV export. facet-metadata
Wed, 02 Jul 2014 14:42:07 +0200 Raimund Renkert Added som more meta data to middle bed height result. facet-metadata
Wed, 02 Jul 2014 12:34:52 +0200 Raimund Renkert Separate meta data key and value by ':'. facet-metadata
Wed, 02 Jul 2014 12:34:06 +0200 Raimund Renkert Removed unused importsRemoved unused imports.. facet-metadata
Wed, 02 Jul 2014 12:33:43 +0200 Raimund Renkert Add meta data to chart series in sq relation. facet-metadata
Wed, 02 Jul 2014 12:32:59 +0200 Raimund Renkert Add units as meta data to middle bed height facets. facet-metadata
Wed, 02 Jul 2014 12:31:57 +0200 Raimund Renkert Updated meta data in facets. facet-metadata
Wed, 02 Jul 2014 09:31:14 +0200 Raimund Renkert Split bed quality facets and updated processors and state. facet-metadata
Wed, 02 Jul 2014 09:29:39 +0200 Raimund Renkert Removed debug output. facet-metadata
Tue, 01 Jul 2014 15:09:56 +0200 Raimund Renkert Split bed differences facet into data specific facets. facet-metadata
Tue, 01 Jul 2014 13:27:53 +0200 Raimund Renkert Bedheight facet now returns double[][]. Removed obsolete processor code. facet-metadata
Tue, 01 Jul 2014 13:25:46 +0200 Raimund Renkert Moved MiddleBedHeight classes to minfo package. Facet now returns double[][] data. facet-metadata
Tue, 01 Jul 2014 13:11:43 +0200 Raimund Renkert Fixed some smartgwt 4.1 related issues.
Mon, 30 Jun 2014 11:29:45 +0200 Raimund Renkert merged with default. facet-metadata
Fri, 27 Jun 2014 19:28:08 +0200 Tom Gottfried Added tag 3.1.4 for changeset 6fef38a526c7
Fri, 27 Jun 2014 19:25:29 +0200 Tom Gottfried There is no year/epoche choice anymore for bed differences. 3.1.4
Fri, 27 Jun 2014 18:47:55 +0200 Tom Gottfried Exclude annotation types without trailing unit (assumed after whitespace).
Fri, 27 Jun 2014 16:52:00 +0200 Sascha L. Teichmann Removed obsolete XPath expression.
Fri, 27 Jun 2014 15:52:05 +0200 Tom Gottfried Minor cleanup in meta-data.xml.
Fri, 27 Jun 2014 15:10:10 +0200 Raimund Renkert Select complete differences matrix to have a well sorted dc-tree.
Fri, 27 Jun 2014 13:05:34 +0200 Raimund Renkert Removed code that ignores a user subtitle and sets a default subtitle.
Fri, 27 Jun 2014 09:50:46 +0200 Raimund Renkert Fixed datacage info field for bed height differences.
Thu, 26 Jun 2014 15:00:28 +0200 Raimund Renkert merged.
Thu, 26 Jun 2014 14:59:28 +0200 Raimund Renkert Changed twin dc panel in bed height deifferences to single dc and use the new differences dc macro.
Thu, 26 Jun 2014 14:54:04 +0200 Raimund Renkert Updated macros and db statement for minfo bedheight differences.
Thu, 26 Jun 2014 13:00:18 +0200 Sascha L. Teichmann Datacage function resolver: Declare static functions static.
Thu, 26 Jun 2014 12:54:31 +0200 Sascha L. Teichmann Added dc:coalesce(a, b). Returns first element which is not empty or not zero.
Thu, 26 Jun 2014 12:44:40 +0200 Sascha L. Teichmann Added dc:lowercase() dc:uppercase()
Wed, 25 Jun 2014 15:40:44 +0200 Raimund Renkert Set identifier for listgridfields and resized columns.
Tue, 24 Jun 2014 16:02:41 +0200 Tom Gottfried issue1633: Add missing info line.
Fri, 20 Jun 2014 16:52:14 +0200 Sascha L. Teichmann DC: Flatten bed height diff tree a bit.
Fri, 20 Jun 2014 16:41:30 +0200 Sascha L. Teichmann DC: Group bedheight diffs by both years.
Fri, 20 Jun 2014 16:33:36 +0200 Raimund Renkert merged.
Fri, 20 Jun 2014 16:33:09 +0200 Raimund Renkert New macros for bed height differneces.
Fri, 20 Jun 2014 16:26:26 +0200 Sascha L. Teichmann Datacage: Make it possible to group a value tuple into more than one group.
Fri, 20 Jun 2014 13:45:54 +0200 Raimund Renkert Fixed river selection for interactive map.
Fri, 20 Jun 2014 12:51:08 +0200 Tom Gottfried i18n for WMS legend window title.
Thu, 19 Jun 2014 18:20:39 +0200 Sascha L. Teichmann Added script to find unused i18n in *.java and *.xml files.
Thu, 19 Jun 2014 15:07:15 +0200 Sascha L. Teichmann Fixed last anomalie in i18n files.
Thu, 19 Jun 2014 15:02:41 +0200 Sascha L. Teichmann Removed more anomalies from i18n.
Thu, 19 Jun 2014 14:48:11 +0200 Sascha L. Teichmann Run native2ascii over i18n files.
Thu, 19 Jun 2014 13:54:02 +0200 Tom Gottfried Fixed i18n string in other german translation.
Thu, 19 Jun 2014 13:36:40 +0200 Raimund Renkert Fixed i18n string in german translation.
Thu, 19 Jun 2014 11:06:12 +0200 Tom Gottfried This additional version of JFreeChart prevented diagrams to be drawn.
Wed, 18 Jun 2014 18:49:50 +0200 Tom Gottfried Remove obsolete generator references.
Wed, 18 Jun 2014 18:18:04 +0200 Tom Gottfried Avoid having to set VERSION in external script.
Wed, 18 Jun 2014 16:34:08 +0200 Tom Gottfried Override bad defaults of isc-maven-plugin. Please set DEFAULT_WD in make_release_sh to something individual if you are on a multi-user system.
Wed, 18 Jun 2014 15:30:39 +0200 Sascha L. Teichmann Datacage: Moved year filtering of bed heights to separate macro to be reusable in other contextes.
Wed, 18 Jun 2014 15:20:07 +0200 Tom Gottfried Use version-specific mapserver-URLs for release.
Wed, 18 Jun 2014 14:29:05 +0200 Raimund Renkert merged.
Wed, 18 Jun 2014 14:27:56 +0200 Raimund Renkert Fixed sediment load epoch input panel.
Wed, 18 Jun 2014 14:27:17 +0200 Raimund Renkert Fixed "pegelinfo"-wiki links.
Wed, 18 Jun 2014 14:26:36 +0200 Raimund Renkert Fixed date range input panels.
Wed, 18 Jun 2014 14:25:46 +0200 Raimund Renkert Fixed columns in location/distance helper panels.
Wed, 18 Jun 2014 14:25:01 +0200 Raimund Renkert Fixed compile errors for smartgwt 4.1.
Wed, 18 Jun 2014 14:23:25 +0200 Raimund Renkert Use SmartGWT version 4.1p. Updated release script to download SmartGWT.
Wed, 18 Jun 2014 12:32:24 +0200 Tom Gottfried Importer: document import of UUIDs.
Tue, 17 Jun 2014 17:57:25 +0200 Tom Gottfried issue1633: Add info lines in SQ-relation CSV export.
Tue, 17 Jun 2014 17:50:59 +0200 Tom Gottfried So you do not need to type every string twice.
Tue, 17 Jun 2014 09:54:40 +0200 Raimund Renkert Removed unnecessary container widgets and layouts.
Tue, 17 Jun 2014 09:47:45 +0200 Raimund Renkert Moved info stack section to top level widget (parameterlist).
Tue, 17 Jun 2014 09:45:48 +0200 Raimund Renkert Replaced plain gwt with smartgwt components in info panels.
Fri, 13 Jun 2014 16:34:29 +0200 Tom Gottfried Add unit for Q in SQ relation exports.
Thu, 12 Jun 2014 19:43:02 +0200 Tom Gottfried Include last year of epoch in calculation.
Thu, 12 Jun 2014 19:16:30 +0200 Sascha L. Teichmann Small Java related cosmetics.
Thu, 12 Jun 2014 12:29:03 +0200 Tom Gottfried Nasty little detail overlooked in last commit.
Thu, 12 Jun 2014 12:26:05 +0200 Tom Gottfried This guess was not always correct.
Thu, 12 Jun 2014 12:21:55 +0200 Tom Gottfried Add new DateUtil class.
Tue, 10 Jun 2014 15:27:31 +0200 Tom Gottfried Complete rev7925.
Tue, 10 Jun 2014 15:23:40 +0200 Tom Gottfried Importer: remove system property and documentation for bed height epochs.
Tue, 10 Jun 2014 15:11:36 +0200 Tom Gottfried SCHEMA CHANGE: Removed bed height epochs.
Tue, 10 Jun 2014 12:51:08 +0200 Raimund Renkert Removed bed differences epoch from datacage.
Fri, 06 Jun 2014 17:02:03 +0200 Raimund Renkert Removed datacage macro calls for bed height epochs.
Fri, 06 Jun 2014 17:00:56 +0200 Raimund Renkert Removed clientside filter for bed height epochs.
Fri, 06 Jun 2014 17:00:01 +0200 Raimund Renkert Removed obsolete bed height epoch files.
Fri, 06 Jun 2014 16:59:16 +0200 Raimund Renkert Removed serverside path for bed height epochs.
Fri, 06 Jun 2014 16:47:48 +0200 Raimund Renkert Removed bed height epoch in importer.
Thu, 05 Jun 2014 15:32:52 +0200 Tom Gottfried Make grain fraction type 'unknown' explicit and use it where appropriate.
Wed, 04 Jun 2014 18:22:14 +0200 Tom Gottfried Adapted bed differences PDF export to CSV export and some cleanup of field names.
Wed, 04 Jun 2014 15:34:22 +0200 Sascha L. Teichmann flys/issue1628: Adjusted the PDF export.
Wed, 04 Jun 2014 13:06:52 +0200 Tom Gottfried Change column order in bed differences export.
Wed, 04 Jun 2014 12:53:28 +0200 Sascha L. Teichmann Added diff pair column to CSV export of bed height differences. TODO: same for PDF, adjust client.
Wed, 04 Jun 2014 12:22:01 +0200 Tom Gottfried Allow differentiating between units of sediment sources/sinks in annotation types also in datacage.
Wed, 04 Jun 2014 11:16:52 +0200 Tom Gottfried Annotations are not points.
Wed, 04 Jun 2014 10:55:04 +0200 Sascha L. Teichmann Added text color for annotation labels.
Tue, 03 Jun 2014 17:57:07 +0200 Sascha L. Teichmann Feed unit to PDF template.
Tue, 03 Jun 2014 15:42:49 +0200 Sascha L. Teichmann Fixed flys/issue1628. Made "unit" a configurable field in PDF export.
Sun, 01 Jun 2014 08:26:37 +0200 Sascha L. Teichmann Fixed typos in datacage manual.
Fri, 30 May 2014 16:56:40 +0200 Tom Gottfried issue1628: correct unit and at least partly complete column name for CSV.
Fri, 30 May 2014 15:46:53 +0200 Tom Gottfried issue661: prototyped tooltip for porosities in datacage.
Wed, 28 May 2014 12:26:13 +0200 Sascha L. Teichmann Potential fix for exception reported in flys/issue1717.
Tue, 27 May 2014 19:56:13 +0200 Tom Gottfried Upgrade to SmartGWT 3.1 (bugfix Release) as this did at least not seem to cause any problems.
Mon, 26 May 2014 17:00:28 +0200 Sascha L. Teichmann Potential fix for flys/issue1717: Draw manuel points on W or Q axis depending on the calculation.
Mon, 26 May 2014 12:40:19 +0200 Sascha L. Teichmann Fix for flys/issue1670: Introduce 100m gaps in single bed width.
Wed, 21 May 2014 17:26:12 +0200 Sascha L. Teichmann Added tag 3.1.3 for changeset 8333b9b06c98
Wed, 21 May 2014 17:03:02 +0200 Raimund Renkert Return NaN for width if no width exists for the requested station in bedheights data. 3.1.3
Wed, 21 May 2014 13:22:44 +0200 Raimund Renkert Added tag 3.1.3 for changeset e0d06f4edaa6
Wed, 21 May 2014 13:22:31 +0200 Raimund Renkert Removed tag 3.1.13
Wed, 21 May 2014 12:08:14 +0200 Raimund Renkert Added tag 3.1.13 for changeset 9d5385ccad07
Wed, 21 May 2014 11:44:58 +0200 Sascha L. Teichmann Use old version of iReport to generate binary compatible version of the PDF S/Q template.
Wed, 21 May 2014 11:43:10 +0200 Raimund Renkert Added metadata to facets. facet-metadata
Wed, 21 May 2014 11:41:06 +0200 Raimund Renkert Use the metadata to write csv header when exporting a chart. facet-metadata
Wed, 21 May 2014 11:40:14 +0200 Raimund Renkert Add metadata to chart series and datasets. facet-metadata
Wed, 21 May 2014 11:36:21 +0200 Raimund Renkert Added metadata to styled series. facet-metadata
Wed, 21 May 2014 11:35:09 +0200 Raimund Renkert New class and interface for metadata in chart series and datasets. facet-metadata
Wed, 21 May 2014 11:25:05 +0200 Sascha L. Teichmann Fix flys/issue1719: s@Abflusskurve/-tafel@Modell-Abflusskurve/-tafel@
Mon, 19 May 2014 12:47:50 +0200 Raimund Renkert Use the new way of building static facets if such facets exist else ignore this way.
Fri, 16 May 2014 18:50:56 +0200 Tom Gottfried Added tag 3.1.3 for changeset 952b57b43e2f
Fri, 16 May 2014 17:51:55 +0200 Tom Gottfried Importer: depths are always numbers assumed to represent centimeters.
Fri, 16 May 2014 17:12:36 +0200 Sascha L. Teichmann Removed trailing whitespace.
Fri, 16 May 2014 17:11:12 +0200 Sascha L. Teichmann Removed trailing whitespace.
Fri, 16 May 2014 17:10:10 +0200 Sascha L. Teichmann Removed trailing whitespace.
Fri, 16 May 2014 14:57:46 +0200 Tom Gottfried Add porosity importer to helper script.
Fri, 16 May 2014 13:17:29 +0200 Raimund Renkert Use description from database for i18n (completed revision dc8910e29dd4).
Fri, 16 May 2014 13:14:52 +0200 Tom Gottfried PorosityParser: Strip file extension for description.
Fri, 16 May 2014 12:26:11 +0200 Tom Gottfried Number an unit have to separated by whitespace.
Fri, 16 May 2014 12:11:31 +0200 Tom Gottfried i18n for porosities (needs to be filled with data).
Fri, 16 May 2014 10:55:59 +0200 Raimund Renkert Fixed subtitle handling and added flowvelocity subtitle.
Fri, 16 May 2014 09:32:51 +0200 Raimund Renkert merged.
Fri, 16 May 2014 09:32:19 +0200 Raimund Renkert Changed column names in sounding select state ui.
Thu, 15 May 2014 17:19:55 +0200 Sascha L. Teichmann flys/issue1716: Adjusted installation from binaries.
Thu, 15 May 2014 11:56:10 +0200 Sascha L. Teichmann Issue1308 Forgot to rename columns.
Wed, 14 May 2014 16:58:07 +0200 Tom Gottfried Corrected wording for moving average.
Wed, 14 May 2014 10:11:16 +0200 Raimund Renkert Added importer documentation for porosity data.
Wed, 14 May 2014 10:07:35 +0200 Raimund Renkert Backed out changeset 0c88a5d30ca2 facet-metadata
Wed, 14 May 2014 09:59:47 +0200 Raimund Renkert Added importer documentation for porosity data. facet-metadata
Tue, 13 May 2014 17:27:14 +0200 Raimund Renkert merged.
Tue, 13 May 2014 17:07:26 +0200 Raimund Renkert Removed step back button for river selection. Fix/Workarround for issue 1203/1714.
Tue, 13 May 2014 10:30:00 +0200 Tom Gottfried Precision and scale have to be set to represent integers with NUMBER; DOUBLE PRECISION is preferable for floating point (see issue1304).
Thu, 08 May 2014 15:26:32 +0200 Sascha L. Teichmann Removed obsolete import.
Thu, 08 May 2014 13:52:47 +0200 Raimund Renkert merged.
Thu, 08 May 2014 13:52:20 +0200 Raimund Renkert Updated oracle minfo schema (added porosity).
Thu, 08 May 2014 13:48:45 +0200 Raimund Renkert Fixed porosity importer. Find existing db entries and parse values from string, not via double.
Thu, 08 May 2014 13:46:32 +0200 Raimund Renkert Fixed getPeer for depth. Select with a small epsilon, not extact match.
Thu, 08 May 2014 13:45:23 +0200 Raimund Renkert Order porosities by station.
Tue, 06 May 2014 17:24:59 +0200 Sascha L. Teichmann Fixes flys/issue1308. Add new column "Messstellenart" in "Messstellen-Info".
Tue, 06 May 2014 16:12:34 +0200 Sascha L. Teichmann Preparation for flys/issue1643: Introduced four new annotation types:
Tue, 06 May 2014 15:44:44 +0200 Sascha L. Teichmann Fixed some whitespace in annotation classifier xml.
Mon, 05 May 2014 12:40:13 +0200 Sascha L. Teichmann Fix for flys/issue1635: Added legend for table. TODO: Adjust english template. BTW: Who threw the original templates away?
Wed, 30 Apr 2014 17:23:28 +0200 Sascha L. Teichmann Fixed imports and make it build again.
Wed, 30 Apr 2014 17:16:57 +0200 Sascha L. Teichmann Removed obsolete imports.
Wed, 30 Apr 2014 15:29:50 +0200 Raimund Renkert merged.
Wed, 30 Apr 2014 15:28:04 +0200 Raimund Renkert Added cache key class for porosity.
Wed, 30 Apr 2014 15:26:44 +0200 Raimund Renkert New macro for porosities in datacage config.
Wed, 30 Apr 2014 15:25:50 +0200 Raimund Renkert Added porosity facet to minfo artifact config.
Wed, 30 Apr 2014 15:25:06 +0200 Raimund Renkert Added config for porosity artifact.
Wed, 30 Apr 2014 15:22:27 +0200 Raimund Renkert Handle porosity facets in a processor.
Wed, 30 Apr 2014 15:20:41 +0200 Raimund Renkert Added new facet to facettypes.
Wed, 30 Apr 2014 15:20:11 +0200 Raimund Renkert New Facet, datatype and data factory for porosities.
Wed, 30 Apr 2014 15:17:54 +0200 Raimund Renkert Build static facets in D4EArtifact.
Wed, 30 Apr 2014 15:16:42 +0200 Raimund Renkert Removed name and getter for name (Moved to DefaultArtifact).
Wed, 30 Apr 2014 15:15:35 +0200 Raimund Renkert D4EArtifact is no longer abstract.
Wed, 30 Apr 2014 15:12:32 +0200 Raimund Renkert Updated signature of artifacts setup method; Removed unnecessary setup overrides.
Wed, 30 Apr 2014 14:12:59 +0200 Raimund Renkert Parse and import porosities.
Wed, 30 Apr 2014 14:11:29 +0200 Raimund Renkert Added model, parser and importer for porosities.
Wed, 30 Apr 2014 14:09:53 +0200 Raimund Renkert Added tables for porosity and porosity values to postgres schema.
Fri, 25 Apr 2014 15:46:06 +0200 Sascha L. Teichmann Bring date format on par with server format. Hopefully fixes flys/issue1445.
Thu, 17 Apr 2014 17:06:15 +0200 Tom Gottfried Use correct URL from config files in release script.
Thu, 17 Apr 2014 11:45:23 +0200 Tom Gottfried Close branch minfo-opt as it is now merged to default. minfo-opt
Thu, 17 Apr 2014 11:42:12 +0200 Tom Gottfried Merged minfo-opt branch into default.
Thu, 03 Apr 2014 14:10:53 +0200 Raimund Renkert Draw lines with gaps for sounding width, and bed heights. minfo-opt
Thu, 03 Apr 2014 14:01:01 +0200 Raimund Renkert Avoid NPE in sounding select state if no year is set for bed heights. minfo-opt
Fri, 28 Mar 2014 11:22:55 +0100 Raimund Renkert Added i18n stings for morph active width. minfo-opt
Fri, 28 Mar 2014 11:22:18 +0100 Raimund Renkert Added new columns for morph active width. minfo-opt
Fri, 28 Mar 2014 11:21:49 +0100 Raimund Renkert Add new facet for morph active width to bed height difference calculation. minfo-opt
Fri, 28 Mar 2014 11:20:49 +0100 Raimund Renkert Added morph. active width to bed height difference calculation. minfo-opt
Thu, 27 Mar 2014 14:56:34 +0100 Raimund Renkert Renamed the incorrectly named morph width to sounding width. minfo-opt
Thu, 27 Mar 2014 11:21:31 +0100 Sascha L. Teichmann Added GNU Affero General Public License text to DiveElements/River.
Thu, 20 Mar 2014 13:36:59 +0100 Raimund Renkert Display the additional information extracted from multiattribute data. minfo-opt
Thu, 20 Mar 2014 13:36:20 +0100 Raimund Renkert Added the new multiattribute data type. minfo-opt
Thu, 20 Mar 2014 13:35:45 +0100 Raimund Renkert New method to extract multi attribute data. minfo-opt
Thu, 20 Mar 2014 13:35:13 +0100 Raimund Renkert Add additional data in soundigs select state. minfo-opt
Thu, 20 Mar 2014 13:34:05 +0100 Raimund Renkert Changed state datatype for soundings select state. minfo-opt
Thu, 20 Mar 2014 13:32:43 +0100 Raimund Renkert Added new state data type. minfo-opt
Wed, 19 Mar 2014 15:08:44 +0100 Raimund Renkert Fixed WSPLGEN classes. Allow 0 for 'to' in differences.
Wed, 12 Mar 2014 11:16:45 +0100 Raimund Renkert Use the sediment yield kind to get data to avoid mixing epoch with off. epoch data. minfo-opt
Tue, 18 Mar 2014 18:07:27 +0100 Tom Gottfried Mention DIPS field-names in ETL-README.
Mon, 17 Mar 2014 12:51:41 +0100 Tom Gottfried Use new OSM-WMS.
Mon, 17 Mar 2014 10:30:39 +0100 Tom Gottfried Release script broke with r7814:242e790fb4ee.
Fri, 07 Mar 2014 18:40:31 +0100 Sascha L. Teichmann Added tag 3.1.2 for changeset 242e790fb4ee
Fri, 07 Mar 2014 18:38:35 +0100 Sascha L. Teichmann More fixes for the Free Software installation. 3.1.2
Fri, 07 Mar 2014 17:14:35 +0100 Raimund Renkert Replace model uuid of 'Beispielfluss' with model_uuid of 'Elbe'.
Fri, 07 Mar 2014 16:28:23 +0100 Raimund Renkert Added apache example config, updated install doku.
Fri, 07 Mar 2014 16:26:44 +0100 Raimund Renkert Added images and html references for inactive rivers: Rhein, Oder.
Fri, 07 Mar 2014 16:25:47 +0100 Raimund Renkert Changed model uuid of 'Elbe' to model uuid of 'Beispielfluss'.
Fri, 07 Mar 2014 11:16:24 +0100 Raimund Renkert Added i18n strings for chart subtitle. minfo-opt
Fri, 07 Mar 2014 11:15:38 +0100 Raimund Renkert Calculate the zoom dependent radius and add the informations to chart subtitle. minfo-opt
Fri, 07 Mar 2014 11:12:59 +0100 Raimund Renkert Concatenate the subtitle parts and add them to the default subtitle. minfo-opt
Fri, 07 Mar 2014 11:11:11 +0100 Raimund Renkert Added subtitle parts to modify the chart subtitle via the outprocessor. minfo-opt
Fri, 07 Mar 2014 11:09:46 +0100 Raimund Renkert Use the updated default subtitle or the 'old' one from chart settings. minfo-opt
Thu, 06 Mar 2014 18:45:40 +0100 Tom Gottfried Add extra config files for modules and zoom scales and give option to use custom files for release.
Thu, 06 Mar 2014 18:19:01 +0100 Tom Gottfried INSTALL_DE: use useradd with defaults.
Thu, 06 Mar 2014 18:08:04 +0100 Tom Gottfried INSTALL_DE: more small improvements and corrections.
Thu, 06 Mar 2014 17:30:59 +0100 Tom Gottfried Remove not publicly available WMS services and enable custom configuration through release script.
Thu, 06 Mar 2014 16:43:49 +0100 Tom Gottfried Remove obsolete MapServer stuff.
Thu, 06 Mar 2014 16:42:35 +0100 Tom Gottfried Remove obsolete WSPLGEN binary.
Thu, 06 Mar 2014 16:39:12 +0100 Tom Gottfried Ignore python byte code.
Thu, 06 Mar 2014 16:38:45 +0100 Tom Gottfried Use latest WSPLGEN binary.
Thu, 06 Mar 2014 14:10:24 +0100 Raimund Renkert Added i18n strings for winfo difference facet names. minfo-opt
Thu, 06 Mar 2014 14:10:00 +0100 Raimund Renkert Fixed datacage macro for winfo differences and added the new facet. minfo-opt
Thu, 06 Mar 2014 14:09:10 +0100 Raimund Renkert Mapped a theme for the new differences facet. minfo-opt
Thu, 06 Mar 2014 14:08:37 +0100 Raimund Renkert Add the new facet to drawable facets. minfo-opt
Thu, 06 Mar 2014 14:07:24 +0100 Raimund Renkert Add the new difference facet and set facets active/inactive. minfo-opt
Thu, 06 Mar 2014 14:04:46 +0100 Raimund Renkert Added new facet for filtered winfo differences. minfo-opt
Thu, 06 Mar 2014 14:03:10 +0100 Raimund Renkert Added default zoom scales. minfo-opt
Thu, 06 Mar 2014 14:02:36 +0100 Raimund Renkert Try to load default zoom scales if no zoom scale defined for the current river. minfo-opt
Wed, 05 Mar 2014 19:47:54 +0100 Tom Gottfried INSTALL_DE: more small improvements and corrections.
Wed, 05 Mar 2014 19:33:55 +0100 Tom Gottfried Set useful DB connection configuration for demo installation.
Wed, 05 Mar 2014 17:52:19 +0100 Tom Gottfried INSTALL_DE: small corrections and (hopefully) improvements.
Wed, 05 Mar 2014 17:51:23 +0100 Tom Gottfried INSTALL_DE: we don't want links to internalt sites and to build WSPLGEN
Wed, 05 Mar 2014 17:47:14 +0100 Tom Gottfried INSTALL_DE: install Java 7 prior to tomcat to avoid Java 6 installation.
Wed, 05 Mar 2014 15:53:46 +0100 Tom Gottfried Useful server-logging for demo installation.
Tue, 04 Mar 2014 19:24:10 +0100 Tom Gottfried Set appropriate client log-file for demo installation.
Tue, 04 Mar 2014 19:14:15 +0100 Tom Gottfried INSTALL_DE: remove obsolete server configuration.
Tue, 04 Mar 2014 19:08:02 +0100 Tom Gottfried Remove FLYS-specific stuff from map configuration and allow to give a custom files in release script.
Tue, 04 Mar 2014 18:40:00 +0100 Tom Gottfried INSTALL_DE: remove obsolete client configuration.
Tue, 04 Mar 2014 18:34:24 +0100 Tom Gottfried Remove FLYS-specific stuff from config.yaml and allow to give a custom file in release script.
Tue, 04 Mar 2014 17:58:10 +0100 Tom Gottfried Set print URL to useful value for demo installation.
Tue, 04 Mar 2014 17:42:31 +0100 Tom Gottfried INSTALL_DE: mention tested system and simplify dependency installation.
Tue, 04 Mar 2014 17:19:48 +0100 Tom Gottfried Defaulting to GGinA authentication in release script instead of client sources.
Tue, 04 Mar 2014 15:23:50 +0100 Tom Gottfried Replace FLYS-specific features.xml.
Mon, 03 Mar 2014 15:40:25 +0100 Raimund Renkert merged.
Mon, 03 Mar 2014 15:39:35 +0100 Raimund Renkert Validate waterlevel 'to' value on change.
Mon, 03 Mar 2014 12:27:04 +0100 Andre Heinecke Change to work dir bevor creating artifacts and datacage db
Mon, 03 Mar 2014 11:46:45 +0100 Raimund Renkert merged.
Mon, 03 Mar 2014 11:46:09 +0100 Raimund Renkert Added german INSTALL.
Mon, 03 Mar 2014 11:44:56 +0100 Raimund Renkert Changed directory variable in h2 create scripts.
Thu, 27 Feb 2014 18:09:39 +0100 Sascha L. Teichmann Removed obsolete imports.
Thu, 27 Feb 2014 16:45:36 +0100 Raimund Renkert merged.
Thu, 27 Feb 2014 16:43:24 +0100 Raimund Renkert Replaced river names with model_uuid for available rivers.
Thu, 27 Feb 2014 16:42:35 +0100 Raimund Renkert Use river model_uuid to identify rivers.
Thu, 27 Feb 2014 16:41:47 +0100 Raimund Renkert Replaced hard coded rivers with rivers loaded from module service.
Thu, 27 Feb 2014 16:40:33 +0100 Raimund Renkert Use the river model_uuid as value for data items.
Thu, 27 Feb 2014 16:38:45 +0100 Raimund Renkert Load modules with supported rivers and rivers with model_uuid.
Thu, 27 Feb 2014 15:11:59 +0100 Raimund Renkert Added list to module to store supported rivers.
Thu, 27 Feb 2014 15:10:44 +0100 Raimund Renkert Added model_uuid to river info.
Thu, 27 Feb 2014 15:10:04 +0100 Raimund Renkert Added model_uuid to river model.
Thu, 27 Feb 2014 15:00:09 +0100 Raimund Renkert Added rivers to each module.
Thu, 27 Feb 2014 14:56:36 +0100 Raimund Renkert Read rivers supported by a module from config file.
Thu, 27 Feb 2014 14:55:38 +0100 Raimund Renkert Added list of rivers a module supports.
Thu, 27 Feb 2014 14:51:35 +0100 Raimund Renkert Replaced river name with model_uuid as value in RiverSelect state.
Thu, 27 Feb 2014 14:49:58 +0100 Raimund Renkert Include river model_uuid in RiverService.
Thu, 27 Feb 2014 14:48:59 +0100 Raimund Renkert Include river model_uuid in RiverInfoService.
Thu, 27 Feb 2014 14:46:30 +0100 Raimund Renkert Parse and import model_uuid for rivers.
Thu, 27 Feb 2014 14:45:22 +0100 Raimund Renkert Added model_uuid column to river model.
Mon, 24 Feb 2014 18:55:14 +0100 Andre Heinecke Add german howto to describe how to set up putty / wald and mercurial on windows
Fri, 21 Feb 2014 15:28:08 +0100 Sascha L. Teichmann Hopefully a cleaner fix for flys/issue1549 using the FloatRangeValidator from SmartGWT to verify that the 'to' field stays positive.
Tue, 11 Feb 2014 16:18:57 +0100 Felix Wolfsteller Partial fix issue1532: at least clone artifacts data when cloning
Tue, 11 Feb 2014 16:18:11 +0100 Felix Wolfsteller Upcoming issue1532: Extracted method where 'cloning/initialize' takes place.
Tue, 11 Feb 2014 12:37:16 +0100 Felix Wolfsteller issue1549: Add live-validation to wsplgen to-field.
Fri, 07 Feb 2014 15:48:43 +0100 Felix Wolfsteller issue765: When creating a WMSLayerFacet copy, also copy original
Fri, 07 Feb 2014 10:54:03 +0100 Tom Gottfried Schema correction following yesterday's brain failure.
Thu, 06 Feb 2014 15:05:29 +0100 Tom Gottfried merged
Thu, 06 Feb 2014 15:04:29 +0100 Tom Gottfried SCHEMA CHANGE: renamed uuid-column to avoid collision with data type.
Thu, 06 Feb 2014 14:47:29 +0100 Felix Wolfsteller Implement deepCopy on WMSLayerFacet WMSDBLayerFacet and WSPLGENLayerFacet
Thu, 06 Feb 2014 13:22:10 +0100 Tom Gottfried SCHEMA CHANGE: Add UUIDs to rivers.
Tue, 04 Feb 2014 11:08:57 +0100 Andre Heinecke (issue1692) Überarbeitetes Init script
Fri, 31 Jan 2014 19:57:35 +0100 Tom Gottfried This was obsolete since r5294.
Thu, 23 Jan 2014 17:48:55 +0100 Sascha L. Teichmann Server side validation for flys/issue1549.
Wed, 22 Jan 2014 13:26:35 +0100 Tom Gottfried Cross section importer: avoid logging of unused feature.
Wed, 22 Jan 2014 13:25:25 +0100 Tom Gottfried Close branch slt-simplify-cross-sections. slt-simplify-cross-sections
Wed, 22 Jan 2014 12:54:18 +0100 Tom Gottfried Merge slt-simplify-cross-sections branch into default.
Mon, 20 Jan 2014 14:54:35 +0100 Sascha L. Teichmann Merged
Mon, 20 Jan 2014 12:44:16 +0100 Sascha L. Teichmann Client side fix for flys/issue1549
Mon, 20 Jan 2014 14:04:20 +0100 Tom Gottfried Merged default into slt-simplify-cross-sections branch and updated package and class names. slt-simplify-cross-sections
Mon, 20 Jan 2014 13:01:02 +0100 Tom Gottfried Add .jar to hgignore.
Thu, 16 Jan 2014 12:02:54 +0100 Tom Gottfried Importer: fix logging in import_river.sh.
Mon, 13 Jan 2014 11:52:22 +0100 Sascha L. Teichmann Removed obsolete imports. Fixed Logger in SQ measurement.
Fri, 20 Dec 2013 18:52:09 +0100 Andre Heinecke Added tag 3.1.1 for changeset 837b620b58b4
Fri, 20 Dec 2013 18:52:05 +0100 Andre Heinecke Removed tag 3.1.1 3.1.1
Fri, 20 Dec 2013 18:50:55 +0100 Andre Heinecke Fix doOut for Porosity sublayer
Fri, 20 Dec 2013 18:49:54 +0100 Andre Heinecke Make GAP_TOLERANCE static
Fri, 20 Dec 2013 18:31:02 +0100 Andre Heinecke (issue1502) Allow annotation handling to be overwritten
Fri, 20 Dec 2013 16:49:50 +0100 Andre Heinecke Remove extremly spammy debug output
Fri, 20 Dec 2013 15:10:56 +0100 Andre Heinecke Added tag 3.1.1 for changeset 20b4dd8a47eb
Fri, 20 Dec 2013 15:10:51 +0100 Andre Heinecke Removed tag 3.1.1
Fri, 20 Dec 2013 15:10:08 +0100 Andre Heinecke Fix compilation of the AreaData change.
Fri, 20 Dec 2013 13:09:25 +0100 Andre Heinecke Added tag 3.1.1 for changeset aa5ad2f62def
Fri, 20 Dec 2013 13:06:03 +0100 Andre Heinecke Areas are not Volumes!
Fri, 20 Dec 2013 12:50:01 +0100 Andre Heinecke (issue1574) Add correction curves to W Area compatibility lists
Fri, 20 Dec 2013 12:40:08 +0100 Andre Heinecke (issue1574) Add area handling for correction curves
Thu, 19 Dec 2013 18:36:00 +0100 Andre Heinecke (issue1622) Paint W Differences on diffW Axis
Thu, 19 Dec 2013 18:35:03 +0100 Andre Heinecke (issue1622) Allow areas with w_differences
Thu, 19 Dec 2013 18:19:24 +0100 Andre Heinecke Only show 3 as we are 3.1.x now
Thu, 19 Dec 2013 10:45:14 +0100 Sascha L. Teichmann S/Q relation be more correct with judgment if a sieve is correct. Needs load and diameter.
Wed, 18 Dec 2013 19:51:23 +0100 Sascha L. Teichmann S/Q relation removed false COALSCE from SQL statement. Removed misplaced sieve adjustment.
Wed, 18 Dec 2013 15:37:53 +0100 Sascha L. Teichmann S/Q relation: Adjust sieves only once during construction.
Wed, 18 Dec 2013 12:39:18 +0100 Tom Gottfried Variance is defined as the sum of squared differences.
Wed, 18 Dec 2013 09:53:44 +0100 Andre Heinecke (issue1594) Get the correct differences data
Tue, 17 Dec 2013 18:27:13 +0100 Andre Heinecke (issue1594) Move Bed differences absolute height into the correct processor
Tue, 17 Dec 2013 17:59:37 +0100 Sascha L. Teichmann SQ relation: only take sieve which have values at all.
Tue, 17 Dec 2013 17:21:37 +0100 Andre Heinecke (issue1577, issue1494) Wrap wst name depending on Q > 0
Tue, 17 Dec 2013 14:43:26 +0100 Andre Heinecke (issue1581) Remove Minfo-heights from differencable
Mon, 16 Dec 2013 19:09:50 +0100 Andre Heinecke (issue1579) Add Hack to not syncronize and add second axis in static GaugeDischarge
Mon, 16 Dec 2013 19:08:39 +0100 Andre Heinecke (issue1559) Improve Exception handling and allow null titles
Mon, 16 Dec 2013 16:42:24 +0100 Sascha L. Teichmann Removed obsolete imports.
Mon, 16 Dec 2013 16:39:12 +0100 Sascha L. Teichmann SQ Relation: Added CSV dumping to raw SedDB query results.
Mon, 16 Dec 2013 16:24:07 +0100 Andre Heinecke (issue1649) Remove broken getWKms from RiverUtils and use WDifferencesState instead
Mon, 16 Dec 2013 16:00:10 +0100 Andre Heinecke (issue1649) Better check for waterlevel data and accept wkms data
Mon, 16 Dec 2013 15:14:40 +0100 Sascha L. Teichmann Removed obsolete imports.
Mon, 16 Dec 2013 12:41:16 +0100 Andre Heinecke Add Override marker and fix indention
Mon, 16 Dec 2013 12:26:52 +0100 Andre Heinecke (issue1596) Sort Export of Middle bedHeight
Mon, 16 Dec 2013 12:23:01 +0100 Andre Heinecke (issue1596) Make MiddleBedHeightData comparable
Fri, 13 Dec 2013 19:03:00 +0100 Andre Heinecke (issue1579) Fix axes syncronisation at Gauges
Fri, 13 Dec 2013 17:44:57 +0100 Andre Heinecke Fix build by removing bedheightsoundingprocessor from old Longitundinal Generator
Fri, 13 Dec 2013 15:39:05 +0100 Andre Heinecke (issue1225) Unify "Width" processor
Thu, 12 Dec 2013 16:26:21 +0100 Andre Heinecke (issue1632) Use DOS line endings
Thu, 12 Dec 2013 16:01:40 +0100 Andre Heinecke (issue1666) Calculate wRow after rounding the first value.
Thu, 12 Dec 2013 07:57:13 +0100 Felix Wolfsteller issue1577: Add W-Wrapping of wst-names in WKmsFactory if kind is one
Wed, 11 Dec 2013 17:13:26 +0100 Andre Heinecke (issue1614) Handle NaN in Styled Series created by SedimentLoadProcessors
Wed, 11 Dec 2013 17:11:43 +0100 Andre Heinecke Remove obsolete Sedimentload class to avoid confusion
Wed, 11 Dec 2013 11:20:10 +0100 Felix Wolfsteller issue1594/issue1603: Put bed_differences to correct axis.
Wed, 11 Dec 2013 10:39:11 +0100 Felix Wolfsteller Extracted method.
Tue, 10 Dec 2013 11:22:06 +0100 Felix Wolfsteller issue1574: Also allow area creation for longitudinal_discharge_sections.
Tue, 10 Dec 2013 09:25:10 +0100 Felix Wolfsteller issue1547: Add more facets to lists of facets with which areas can be created.
Tue, 10 Dec 2013 09:24:05 +0100 Felix Wolfsteller issue1574: Set target out for area artifact at creation time.
Tue, 10 Dec 2013 07:15:06 +0100 Felix Wolfsteller issue1542: I18n change.
Mon, 09 Dec 2013 10:49:34 +0100 Sascha L. Teichmann dc:sort: Removed unnecessary if check. Forgot to push before tag.
Mon, 09 Dec 2013 10:31:24 +0100 Felix Wolfsteller Cosmetics, doc.
Mon, 09 Dec 2013 09:56:01 +0100 Felix Wolfsteller issue1020: Show official lines in datacage to compute uesks, too.
Fri, 06 Dec 2013 16:52:08 +0100 Andre Heinecke Added tag 3.1.0 for changeset 28f287e84296
Fri, 06 Dec 2013 16:52:00 +0100 Andre Heinecke Removed tag 3.1.0 3.1.0
Fri, 06 Dec 2013 16:47:02 +0100 Andre Heinecke (issue1474) Change order of measurement stations
Fri, 06 Dec 2013 16:49:43 +0100 Andre Heinecke Added tag 3.1.0 for changeset 03dc5cc22e26
Fri, 06 Dec 2013 16:44:37 +0100 Tom Gottfried Update coefficients in porosity formula.
Fri, 06 Dec 2013 16:34:58 +0100 Sascha L. Teichmann Datacage: Added <dc:sort>
Fri, 06 Dec 2013 15:36:47 +0100 Felix Wolfsteller issue1688: In flow velocity, discharges are now initially inactive.
Fri, 06 Dec 2013 14:51:48 +0100 Tom Gottfried Order by years in SQ-relation datacage.
Fri, 06 Dec 2013 14:27:03 +0100 Tom Gottfried Order by year in sediment yield datacage.
Fri, 06 Dec 2013 13:58:27 +0100 Tom Gottfried Add sources/sinks to sediment yield datacage.
Fri, 06 Dec 2013 13:17:05 +0100 Tom Gottfried Add recommendations for bed quality and flow velocity.
Fri, 06 Dec 2013 12:56:14 +0100 Andre Heinecke Use correct quotes for long names
Fri, 06 Dec 2013 12:10:24 +0100 Felix Wolfsteller issue1691: Sedimentload-fetching via datacage now picks right facet.
Fri, 06 Dec 2013 11:21:56 +0100 Sascha L. Teichmann Removed obsolete import.
Fri, 06 Dec 2013 10:53:01 +0100 Felix Wolfsteller Fix.
Fri, 06 Dec 2013 10:52:39 +0100 Felix Wolfsteller issue1020: Do not write Q-Lines with wstwriter from floodmapstate.
Fri, 06 Dec 2013 10:51:47 +0100 Felix Wolfsteller issue1020: WstWriter: Add flag to ignore Qs alltogether.
Thu, 05 Dec 2013 22:22:37 +0100 Felix Wolfsteller Improved logging.
Thu, 05 Dec 2013 22:04:15 +0100 Felix Wolfsteller Cosmetics of WstWriter. Actually, a decent class now.
Thu, 05 Dec 2013 19:37:59 +0100 Andre Heinecke Do not NPE if there is a folder without mapfiles in the shapefile path
Thu, 05 Dec 2013 19:29:52 +0100 Andre Heinecke (issue1620) Fix WstWriter Column Header format.
Thu, 05 Dec 2013 17:38:10 +0100 Felix Wolfsteller issue1020 and others: Let StaticWQKmsState spawn other facets, implement computeAdvance.
Thu, 05 Dec 2013 17:34:10 +0100 Felix Wolfsteller Doc.
Thu, 05 Dec 2013 17:33:43 +0100 Felix Wolfsteller Doc.
Thu, 05 Dec 2013 17:33:02 +0100 Felix Wolfsteller Doc.
Thu, 05 Dec 2013 17:32:34 +0100 Felix Wolfsteller Whitespace-cosmetics.
Thu, 05 Dec 2013 16:58:26 +0100 Felix Wolfsteller issue1020: Add WQ constructor that accepts TDoubleArrayList .
Thu, 05 Dec 2013 15:38:35 +0100 Felix Wolfsteller issue1020: When preparing wsts for wsplgen handle other than standard wqkms calculations.
Thu, 05 Dec 2013 15:35:53 +0100 Felix Wolfsteller issue1020: Cosmetics.
Thu, 05 Dec 2013 15:35:04 +0100 Felix Wolfsteller issue1020: Make WQKms able to build from WKms.
Wed, 04 Dec 2013 10:21:08 +0100 Felix Wolfsteller Added two comments about improvements.
Wed, 04 Dec 2013 10:19:10 +0100 Felix Wolfsteller Whitespace.
Wed, 04 Dec 2013 10:18:14 +0100 Felix Wolfsteller Improve logger output.
Tue, 03 Dec 2013 18:00:35 +0100 Andre Heinecke (issue1610) Add units also for _de
Tue, 03 Dec 2013 16:44:20 +0100 Sascha L. Teichmann flys/issue1638: Calculate ntot correctly.
Tue, 03 Dec 2013 16:11:54 +0100 Sascha L. Teichmann Removed obsolete imports.
Tue, 03 Dec 2013 15:09:17 +0100 Felix Wolfsteller issue1020: Avoid some traps, use WKms and handle data from StaticArtifact.
Tue, 03 Dec 2013 12:25:57 +0100 Felix Wolfsteller issue1020: Do not set a data with value null, this breaks stuff further
Tue, 03 Dec 2013 12:25:03 +0100 Felix Wolfsteller issue1020: Handle FixRealizingResult for UESK waterlevel-selection.
Tue, 03 Dec 2013 12:55:17 +0100 Andre Heinecke (issue1632) Use correct l10n for unit
Tue, 03 Dec 2013 12:50:15 +0100 Andre Heinecke (issue1632) Add Unit to CSV export
Tue, 03 Dec 2013 11:48:20 +0100 Andre Heinecke (issue1630) Flush the correct outer output stream
Mon, 02 Dec 2013 14:47:51 +0100 Felix Wolfsteller issue1043: Add i18n for 'dm'.
Mon, 02 Dec 2013 14:45:57 +0100 Felix Wolfsteller issue1043: Add 'dm' type.
Mon, 02 Dec 2013 14:43:43 +0100 Felix Wolfsteller issue1043: Fetch 'dm'-values in QualityMeasurementFactory.
Mon, 02 Dec 2013 14:42:49 +0100 Felix Wolfsteller issue1043: Add 'dm' to types enum in BedQualityDiameterResult.
Mon, 02 Dec 2013 12:17:33 +0100 Felix Wolfsteller issue1630: Fix column calculation for bed quality values.
Mon, 02 Dec 2013 12:16:50 +0100 Felix Wolfsteller Doc.
Mon, 02 Dec 2013 10:47:30 +0100 Felix Wolfsteller BedQualityExporter: Continue/exit early when no results.
Mon, 02 Dec 2013 10:42:43 +0100 Felix Wolfsteller Refactoring: extracted method
Mon, 02 Dec 2013 10:08:23 +0100 Felix Wolfsteller issue1579: Load those official lines automatically.
Mon, 02 Dec 2013 09:56:35 +0100 Felix Wolfsteller issue1579: ComputedDischargeCurveGenerator: Handle WQKms data.
Mon, 02 Dec 2013 09:55:14 +0100 Felix Wolfsteller Whistespace.
Mon, 02 Dec 2013 09:48:48 +0100 Felix Wolfsteller issue1579: Added macro to load interpolated official lines.
Fri, 29 Nov 2013 12:18:16 +0100 Felix Wolfsteller Use IsOfficialAccess instead of direct property in WaterlevelExporter.
Fri, 29 Nov 2013 12:17:22 +0100 Felix Wolfsteller Remove close-isOfficial-Handling in StaticWQKmsArtifact.
Fri, 29 Nov 2013 12:16:34 +0100 Felix Wolfsteller Added new IsOfficalAccess to avoid keeping data too close to StaticWQKmsArtifact.
Fri, 29 Nov 2013 10:49:41 +0100 Felix Wolfsteller Avoid certain exception, added todo about issues with implementation.
Thu, 28 Nov 2013 12:04:18 +0100 Felix Wolfsteller Fix doc/debug.
Fri, 29 Nov 2013 11:13:31 +0100 Andre Heinecke (issue1620) join column names with two empty spaces
Fri, 29 Nov 2013 11:12:31 +0100 Andre Heinecke (issue1620) Print the real official Q value instead of the first
Thu, 28 Nov 2013 10:16:55 +0100 Felix Wolfsteller BedQualityExporter: Use foreach instead of manual array loop.
Thu, 28 Nov 2013 10:14:33 +0100 Felix Wolfsteller BedQualityExporter: Fix ancient i/j variable mix-up.
Thu, 28 Nov 2013 10:13:53 +0100 Felix Wolfsteller BedQualityExporter: Refactoring.
Thu, 28 Nov 2013 09:54:21 +0100 Felix Wolfsteller Cosmetics, removed obsolete code.
Thu, 28 Nov 2013 07:26:36 +0100 Felix Wolfsteller Cosmetics, doc fix.
Wed, 27 Nov 2013 19:14:01 +0100 Andre Heinecke (issue1611) Correct i18n property for axis label
Wed, 27 Nov 2013 18:50:21 +0100 Andre Heinecke (issue1667) Remove duplicate points in the same series in Diagram CSV export
Wed, 27 Nov 2013 18:06:04 +0100 Andre Heinecke (issue1666) Update CSV link in updateLinks, too
Wed, 27 Nov 2013 17:17:54 +0100 Andre Heinecke (issue1560) Fix off by one error in ATWriter causing the last value to be omitted.
Wed, 27 Nov 2013 16:21:00 +0100 Andre Heinecke (issue1620) Add export of official lines in WST as specified
Mon, 25 Nov 2013 17:40:47 +0100 Andre Heinecke (issue1225) Use label code also when only one item is present
Wed, 27 Nov 2013 14:55:25 +0100 Felix Wolfsteller issue1596: Store table (cell) data twice: Once as (formatted) string
Wed, 27 Nov 2013 14:36:35 +0100 Felix Wolfsteller Typo fix in doc.
Wed, 27 Nov 2013 11:06:25 +0100 Felix Wolfsteller issue1596: include river wst unit in csv header for middle bed height.
Wed, 27 Nov 2013 11:05:38 +0100 Felix Wolfsteller issue1596: Add unit to middlebedheight csv header.
Mon, 25 Nov 2013 14:59:21 +0100 Andre Heinecke Remove uneccessary debug output added in last commit.
Mon, 25 Nov 2013 14:58:14 +0100 Andre Heinecke (issue1225) Implement Magic labels.
Mon, 25 Nov 2013 14:53:50 +0100 Andre Heinecke (issue1225) Unify Height BedHeight and W axis
Thu, 21 Nov 2013 17:27:14 +0100 Felix Wolfsteller issue1558: Allow fixed axis for timeseries-diagrams.
Thu, 21 Nov 2013 15:40:05 +0100 Andre Heinecke Add isValid method for single double arrays
Thu, 21 Nov 2013 15:37:43 +0100 Andre Heinecke Rename the Global Facet filter to reduce ambiguity with the old facet filter
Thu, 21 Nov 2013 15:35:32 +0100 Andre Heinecke Add timestamp type
Thu, 21 Nov 2013 15:33:42 +0100 Andre Heinecke issue1225 Add i18n for bedheight and use wst height system as unit
Wed, 20 Nov 2013 11:06:17 +0100 Felix Wolfsteller Allow more compact display of mainvalue-table.
Wed, 20 Nov 2013 11:03:53 +0100 Felix Wolfsteller issue1542: Profit from refactoring, use same columns/fields for QDTable.
Wed, 20 Nov 2013 11:03:26 +0100 Felix Wolfsteller issue1542: Only show year of date for mainvalues validity, refactoring.
Wed, 20 Nov 2013 11:02:55 +0100 Felix Wolfsteller issue1542: Reorder columns for main value validity dates.
Wed, 20 Nov 2013 10:02:27 +0100 Felix Wolfsteller issue1613: added accidentally omitted i18n.
Tue, 19 Nov 2013 11:30:50 +0100 Felix Wolfsteller issue1597: Re-enable w/q points in DischargeProcessor. It's yet unclear why it was disabled.
Tue, 19 Nov 2013 10:46:24 +0100 Felix Wolfsteller Renamed winfo variable to more fitting name artifact.
Tue, 19 Nov 2013 10:20:27 +0100 Felix Wolfsteller issue1606: Handle annotation text as well.
Tue, 19 Nov 2013 10:19:25 +0100 Felix Wolfsteller issue1606: Added methods to parse omitted theme properties.
Tue, 19 Nov 2013 10:17:59 +0100 Felix Wolfsteller issue1606: Handle textstyle property in clients StyleEditorWindow.
Mon, 18 Nov 2013 15:38:52 +0100 Felix Wolfsteller issue1063: Always create data for all parameters, even if not specified.
Mon, 18 Nov 2013 15:37:33 +0100 Felix Wolfsteller issue1063: Expose column names in ParameterMatrix.
Mon, 18 Nov 2013 14:37:35 +0100 Tom Gottfried Add i18n for SQ-Outliermethod help-URL.
Mon, 18 Nov 2013 13:11:12 +0100 Tom Gottfried Add units to flow velocity export headers.
Mon, 18 Nov 2013 12:30:36 +0100 Felix Wolfsteller issue1613: In DC, also show the 'diff' facets, define former calc. for hist. W/Q out.
Mon, 18 Nov 2013 12:22:22 +0100 Felix Wolfsteller issue1631: Allow loading of some former historical-discharge facets.
Thu, 14 Nov 2013 12:02:26 +0100 Felix Wolfsteller Doc.
Thu, 14 Nov 2013 12:00:43 +0100 Felix Wolfsteller Builder: Slightly more verbose errormessage.
Thu, 14 Nov 2013 11:58:51 +0100 Felix Wolfsteller issue1020: Display more waterlevels for uesk.
Thu, 14 Nov 2013 11:56:47 +0100 Felix Wolfsteller issue1020: In WaterlevelSelectState create label more differentiated at
Thu, 14 Nov 2013 11:54:02 +0100 Felix Wolfsteller issue1020: Let WspDatacagePanel also handle non-winfo (prev. calc) rec.
Thu, 14 Nov 2013 06:44:11 +0100 Felix Wolfsteller issue1020: Added pointers as comments in code.
Wed, 13 Nov 2013 12:00:21 +0100 Felix Wolfsteller Fix i18n.
Wed, 13 Nov 2013 11:59:26 +0100 Felix Wolfsteller issue1611,1046: Adjusted i18n for tau.
Wed, 13 Nov 2013 11:32:47 +0100 Felix Wolfsteller issue1592: Fix csv headers for w or q calculations.
Wed, 13 Nov 2013 08:10:00 +0100 Felix Wolfsteller issue1542: Include validity also in qdtable, reorder code, widen column width.
Wed, 13 Nov 2013 08:09:19 +0100 Felix Wolfsteller issue1542: Sweeten i18n.
Tue, 12 Nov 2013 19:47:24 +0100 Sascha L. Teichmann flys/issue1503: Evil hack to force loaded of data to be bound to 'w_differences'. TODO: Remove all the broken code from DataCageTwinPanel.
Tue, 12 Nov 2013 17:46:04 +0100 Felix Wolfsteller issue1542: Do not show link to w/q value view if no mainvalues are there.
Tue, 12 Nov 2013 17:15:21 +0100 Felix Wolfsteller issue1542: Let client to i18n and formatting of dates.
Tue, 12 Nov 2013 17:14:52 +0100 Felix Wolfsteller issue1542: WQInfoObjectImpl: Changed implementation from String to Date.
Tue, 12 Nov 2013 17:14:24 +0100 Felix Wolfsteller issue1542: WQInfoObject: Changed properties from String to Date.
Tue, 12 Nov 2013 17:13:07 +0100 Felix Wolfsteller issue1542: Added i18n for start/stoptimes of main values.
Tue, 12 Nov 2013 17:11:51 +0100 Felix Wolfsteller issue1542: Make WQInfoObjects and server provide start and end date for mainvalues, display in table.
Tue, 12 Nov 2013 17:10:38 +0100 Felix Wolfsteller Typo fix in debug output.
Tue, 12 Nov 2013 12:11:23 +0100 Felix Wolfsteller issue1542: Let MainValues have localized dates.
Tue, 12 Nov 2013 11:47:25 +0100 Felix Wolfsteller Add start- and stoptime to WQInfoObjects.
Tue, 12 Nov 2013 11:46:24 +0100 Felix Wolfsteller issue1542: Add timeinterval-data to mainvalues made available via service.
Tue, 12 Nov 2013 11:45:47 +0100 Felix Wolfsteller Doc, cosmetics.
Mon, 11 Nov 2013 11:45:00 +0100 Felix Wolfsteller Removed obsolete method.
Mon, 11 Nov 2013 11:33:53 +0100 Felix Wolfsteller Minor refactoring for future readability and refactoring.
Tue, 12 Nov 2013 16:54:18 +0100 Sascha L. Teichmann Previous fix for flys/issue1675 was broken. :-/
Tue, 12 Nov 2013 15:37:38 +0100 Sascha L. Teichmann Workaround for flys/issue1675: Guarantee that the years are always between 0 and 9999 in macro 'minfo-heights'.
Fri, 08 Nov 2013 18:26:55 +0100 Sascha L. Teichmann Added tag 3.0.18 for changeset b82750667e1a
Fri, 08 Nov 2013 18:04:51 +0100 Sascha L. Teichmann Some i18n for Vollmer curve calculation. 3.0.18
Fri, 08 Nov 2013 16:15:38 +0100 Sascha L. Teichmann More on flys/issue1585: Do not fill circle for interpolated W/Q points.
Fri, 08 Nov 2013 12:27:08 +0100 Felix Wolfsteller Fix i18n (missing closing bracket).
Fri, 08 Nov 2013 12:26:38 +0100 Felix Wolfsteller issue1762: correct facet names.
Fri, 08 Nov 2013 11:58:55 +0100 sascha teichmann issue1585: Part 2/2 of patch from Sascha Teichmann to define datapoint shapes.
Fri, 08 Nov 2013 11:57:37 +0100 sascha teichmann issue1585: Part 1/2 of patch from Sascha Teichmann to define shape for datapoints.
Fri, 08 Nov 2013 10:38:37 +0100 Felix Wolfsteller Fixed logger instantiations that were done with wrong class.
Fri, 08 Nov 2013 10:22:32 +0100 Felix Wolfsteller Added spooky ruby script to get started fixing logger instances of wrong classes.
Fri, 08 Nov 2013 08:03:42 +0100 Felix Wolfsteller Whacky little script to find possibly wrong loggers.
Thu, 07 Nov 2013 19:31:16 +0100 Tom Gottfried Add units to bedquality exporter columns.
Thu, 07 Nov 2013 18:13:45 +0100 Tom Gottfried Change column name in bedheight export.
Thu, 07 Nov 2013 18:13:00 +0100 Tom Gottfried Fix column names in flow velocity export.
Thu, 07 Nov 2013 11:10:58 +0100 Felix Wolfsteller issue1512: i18n.
Thu, 07 Nov 2013 10:27:41 +0100 Felix Wolfsteller Cosmetics, break overlong lines.
Thu, 07 Nov 2013 09:44:38 +0100 Felix Wolfsteller Doc.
Thu, 07 Nov 2013 09:43:44 +0100 Felix Wolfsteller Cosmetics.
Thu, 07 Nov 2013 09:43:20 +0100 Felix Wolfsteller SedimentLoadAccess: Slightly improved readability.
Thu, 07 Nov 2013 09:42:19 +0100 Felix Wolfsteller issue1658: Do not store Access in State.
Thu, 07 Nov 2013 09:03:34 +0100 Felix Wolfsteller Fix SedimentLoadAccess logger instance.
Wed, 06 Nov 2013 19:41:12 +0100 Sascha L. Teichmann Simplified code.
Wed, 06 Nov 2013 19:18:50 +0100 Sascha L. Teichmann Removed obsolete facet for fix events in vollmer curve.
Wed, 06 Nov 2013 19:12:46 +0100 Sascha L. Teichmann Part fix for flys/issue1585: Use result from fitting to display interpolated W/Q points, too. TODO: Draw interpolated as circles.
Wed, 06 Nov 2013 12:07:48 +0100 Felix Wolfsteller issue1664: Let DC instruct StaticWKmsArtifact to spawn facets
Wed, 06 Nov 2013 12:03:38 +0100 Felix Wolfsteller issue1664: Add new Processors to old axis and map them in longitudinal-diagram-defaults.
Wed, 06 Nov 2013 11:57:35 +0100 Felix Wolfsteller issue1664: Prepare new Facets to go to different axis (for wkms from fixa/diffs).
Wed, 06 Nov 2013 09:40:23 +0100 Felix Wolfsteller issue1658: Fix fine_middle epoch facet name.
Mon, 04 Nov 2013 17:24:33 +0100 Felix Wolfsteller issue1658: Adjuste facet descriptions to include unit.
Mon, 04 Nov 2013 17:15:20 +0100 Felix Wolfsteller issue1658: Add unit name to facet description.
Mon, 04 Nov 2013 17:13:44 +0100 Felix Wolfsteller issue1658: i18n for upcoming sediment load facet names (including t/a or m^3/a).
Mon, 04 Nov 2013 15:57:47 +0100 Felix Wolfsteller issue1658: Fix theme styles for sediment load (t/a and m^3/a) facets.
Mon, 04 Nov 2013 15:15:13 +0100 Felix Wolfsteller issue1663: Fix. HistoricalDischargeFacet transmorphed to WaterlevelFacet when cloned.
Mon, 04 Nov 2013 11:26:02 +0100 Sascha L. Teichmann Merged
Mon, 04 Nov 2013 11:24:30 +0100 Sascha L. Teichmann Added tag 3.0.17 for changeset 607246315009
Mon, 04 Nov 2013 11:24:02 +0100 Sascha L. Teichmann Removed tag 3.0.17
Mon, 04 Nov 2013 10:53:23 +0100 Sascha L. Teichmann Added tag 3.0.17 for changeset e97867879a45
Fri, 01 Nov 2013 18:36:39 +0100 Sascha L. Teichmann Removed obsolete imports.
Fri, 01 Nov 2013 16:44:49 +0100 Felix Wolfsteller WOutProcessor: Reorder statements so that function-call-debug-msg comes first.
Fri, 01 Nov 2013 16:41:54 +0100 Felix Wolfsteller White-space cosmetics.
Fri, 01 Nov 2013 16:41:16 +0100 Felix Wolfsteller cosmetics - full stop.
Fri, 01 Nov 2013 16:40:16 +0100 Felix Wolfsteller cosmetics, doc.
Fri, 01 Nov 2013 16:38:03 +0100 Felix Wolfsteller Whitespace-cosmetics.
Fri, 01 Nov 2013 16:37:19 +0100 Felix Wolfsteller issue1658: Fix SedimentLoadLSGenerator (with surprise: isnt that done via processors?).
Fri, 01 Nov 2013 16:31:24 +0100 Felix Wolfsteller Remove now obsolete SedimentLoadProcessor.
Fri, 01 Nov 2013 16:30:52 +0100 Felix Wolfsteller issue1658: New Processors for t/a and m^3/a -axis (stripped down from SedimentLoadProcessor).
Fri, 01 Nov 2013 16:29:40 +0100 Felix Wolfsteller issue1658: Handle new Facet-Types for SedimentLoad.
Fri, 01 Nov 2013 16:27:49 +0100 Felix Wolfsteller issue1658: Adjust Facet to new facet-types (t/a and m^3/a).
Fri, 01 Nov 2013 16:26:15 +0100 Felix Wolfsteller issue1658: Define new FacetTypes and IS functions.
Fri, 01 Nov 2013 16:25:19 +0100 Felix Wolfsteller issue1658: Let SedimentYieldArtifact create facet based on Sed.L. unit.
Fri, 01 Nov 2013 16:23:32 +0100 Felix Wolfsteller issue1658: Have SedimentLoadFactory deliver unit name for given id.
Fri, 01 Nov 2013 16:22:11 +0100 Felix Wolfsteller issue1658: Instead of one SedimentLoad-Axis, have two (t/a, m^3/a).
Fri, 01 Nov 2013 16:21:20 +0100 Felix Wolfsteller issue1658: Prepare minfo-artifact (.xml) to output t/a and m^3/a facets.
Fri, 01 Nov 2013 15:05:35 +0100 Sascha L. Teichmann Datacage: Removed macro "delta-wt-ls" from meta-data.xml as it is not used. 3.0.17
Fri, 01 Nov 2013 13:25:54 +0100 Sascha L. Teichmann Fixed half broken interpolation code for lines to 'Dauerlinie'.
Fri, 01 Nov 2013 12:12:24 +0100 Felix Wolfsteller meta-data.xml: Removed junk.
Fri, 01 Nov 2013 12:11:59 +0100 Felix Wolfsteller issue1571: Exclude vollmer curves from general longitudinal dc folder.
Fri, 01 Nov 2013 11:13:38 +0100 Felix Wolfsteller issue1571: Hav eown folder in dc for vollmer curves.
Fri, 01 Nov 2013 11:12:38 +0100 Felix Wolfsteller issue1571: i18n.
Fri, 01 Nov 2013 11:50:11 +0100 Sascha L. Teichmann Removed redundant lookup for km in call context.
Thu, 31 Oct 2013 21:56:04 +0100 Tom Gottfried WST-Parser: revert the assumption of only complete columns.
Thu, 31 Oct 2013 19:16:42 +0100 Tom Gottfried Correct r7481: use ParseException instead of IllegalArgument that was catched at wrong place.
Thu, 31 Oct 2013 19:03:57 +0100 Sascha L. Teichmann Removed charset encoding on outs. They are mainly binary data which simply should be proxied through.
Thu, 31 Oct 2013 18:34:10 +0100 Sascha L. Teichmann Merged
Thu, 31 Oct 2013 18:30:46 +0100 Sascha L. Teichmann WQDay is increasing(?) if it is empty of last is greater than first.
Thu, 31 Oct 2013 18:26:49 +0100 Sascha L. Teichmann Dont assume that wqdays are always of none zero length.
Thu, 31 Oct 2013 18:25:26 +0100 Sascha L. Teichmann Datacage recommendations: Sort outs to to generate consistent cache keys.
Thu, 31 Oct 2013 15:25:31 +0100 Tom Gottfried WST-Parser and doc: reject files with wrong number of columns.
Thu, 31 Oct 2013 13:11:03 +0100 Tom Gottfried WST-Parser: Improve handling of line-endings.
Thu, 31 Oct 2013 11:56:45 +0100 Tom Gottfried Log errors instead of starting WSPLGEN if required arguments are missing.
Thu, 31 Oct 2013 11:44:09 +0100 Felix Wolfsteller issue1657: Adjust DC conf to spawn sounding widths.
Thu, 31 Oct 2013 11:43:32 +0100 Felix Wolfsteller issue1657: Spawn BEDHEIGHT_SOUNDING_WIDTH facet if asked to. Twiggly.
Thu, 31 Oct 2013 11:41:39 +0100 Felix Wolfsteller i18n for sounding with axis and facet.
Wed, 30 Oct 2013 17:35:12 +0100 Sascha L. Teichmann Datacage recommendations caching: Use LFU strategy to rotate parameter recommendations out earlier. This should be a better config in multiuser user setups because the more frequently used terminal state recs will survive longer.
Wed, 30 Oct 2013 16:04:06 +0100 Felix Wolfsteller issue1345: Add flow_velocities folder.
Wed, 30 Oct 2013 16:03:28 +0100 Felix Wolfsteller issue1345: i18n for dc.
Wed, 30 Oct 2013 15:51:33 +0100 Andre Heinecke Dokumention zur Installation erweitert
Wed, 30 Oct 2013 15:26:21 +0100 Sascha L. Teichmann Experimental caching of datacage recommendations. The respective hook is called a lot and running the datacage over and over again when loading data can be expensive. So the generated recommendations are cached for some time.
Wed, 30 Oct 2013 15:02:16 +0100 Felix Wolfsteller issue1512: Fix loading of all former flow vel. calculation via folder.
Wed, 30 Oct 2013 14:53:26 +0100 Felix Wolfsteller issue1512: Show all flowvelocity facet in former calc. flow vel. part of dc.
Wed, 30 Oct 2013 12:24:03 +0100 Felix Wolfsteller issue1571: i18n.
Wed, 30 Oct 2013 12:03:07 +0100 Felix Wolfsteller issue1572: Call longitudinal-section-user-prototype for bedheight-diffs/year.
Wed, 30 Oct 2013 11:59:09 +0100 Sascha L. Teichmann Merged
Wed, 30 Oct 2013 11:58:57 +0100 Sascha L. Teichmann Datacage: Remove tree branches vom datacage tree on client side which do not contain loadable data.
Wed, 30 Oct 2013 11:57:04 +0100 Sascha L. Teichmann Simplified recommendattion monitor code a bit.
Wed, 30 Oct 2013 11:56:13 +0100 Sascha L. Teichmann Code cleanup.
Wed, 30 Oct 2013 11:55:10 +0100 Sascha L. Teichmann Fix for flys/issue1654: Divide through denisity, do not multiply.
Tue, 29 Oct 2013 19:59:59 +0100 Tom Gottfried Schema change: add lookup table for sediment yield kinds to have its values documented.
Tue, 29 Oct 2013 19:46:41 +0100 Sascha L. Teichmann flys/issue1625: Changed default sediment density factor from 1.8 to 1.9 . The value can be changed by adusting conf.xml (/artifact-databae/options/sediment-density-factor/text()).
Tue, 29 Oct 2013 19:17:28 +0100 Tom Gottfried Importer: document where annotations are searched for.
Tue, 29 Oct 2013 18:57:40 +0100 Tom Gottfried run_geo.sh: allow logging as documented.
Tue, 29 Oct 2013 11:32:56 +0100 Felix Wolfsteller issue1397: Fix reference_curve former calculations in dc.
Tue, 29 Oct 2013 11:31:59 +0100 Felix Wolfsteller dc i18n.
Tue, 29 Oct 2013 10:42:12 +0100 Felix Wolfsteller issue1512: Repair loading all of flowvelocitymeasurements by not equipping
Mon, 28 Oct 2013 15:46:26 +0100 Andre Heinecke inor Layout + Wiki
Mon, 28 Oct 2013 14:22:02 +0100 Andre Heinecke Rechtschreibkorrektur (durchgeführt von Bettina)
Mon, 28 Oct 2013 14:15:53 +0100 Andre Heinecke More installation documentation
Mon, 28 Oct 2013 12:14:46 +0100 Felix Wolfsteller issue1345: Sort sediment densities by year.
Mon, 28 Oct 2013 11:52:14 +0100 Felix Wolfsteller meta-data.xml: Simplify query for densities a bit, sort by depth.
Sun, 27 Oct 2013 17:30:38 +0100 Andre Heinecke Start installation documentation for specific client installation
Fri, 25 Oct 2013 17:06:30 +0200 Tom Gottfried Importer doc: fix some outdated or wrong infos.
Fri, 25 Oct 2013 16:57:15 +0200 Tom Gottfried Importer and doc: Warn instead of die if AT- or STA-file is missing for a gauge.
Fri, 25 Oct 2013 14:32:11 +0200 Felix Wolfsteller FacetTypes: Cosmetics.
Fri, 25 Oct 2013 14:31:56 +0200 Felix Wolfsteller Declare certain bedheight-diagrams as charttypes, for manual points.
Fri, 25 Oct 2013 14:29:38 +0200 Felix Wolfsteller meta-data.xml: Include bedheight-diffs per year in minfo-user-dc.
Fri, 25 Oct 2013 14:10:29 +0200 Felix Wolfsteller meta-data.xml: Subsume the different bed-quality dc-nodes.
Fri, 25 Oct 2013 13:53:48 +0200 Felix Wolfsteller i18n for dc added.
Fri, 25 Oct 2013 13:52:47 +0200 Felix Wolfsteller meta-data.xml: Ease i18nability.
Fri, 25 Oct 2013 15:39:59 +0200 Tom Gottfried Geoimporter: be case-insensitive when looking for floodplains.
Fri, 25 Oct 2013 15:02:08 +0200 Tom Gottfried make-opt-package.sh: give path to internal 'repository'.
Fri, 25 Oct 2013 07:25:19 +0200 Felix Wolfsteller meta-data.xml: Remove duplicates and 'special' macros fro special outs from
Fri, 25 Oct 2013 07:24:15 +0200 Felix Wolfsteller meta-data.xml: Remove delta-wt from longitudinal-section-user-prototype .
Fri, 25 Oct 2013 07:16:16 +0200 Felix Wolfsteller Fix Typo in german i18n (e.g. issue1345) .
Wed, 23 Oct 2013 17:45:56 +0200 Felix Wolfsteller Partly revert rev 7419, conservative guess about which "outs" are handcrafted.
Fri, 25 Oct 2013 03:47:04 +0200 Sascha L. Teichmann Experimental patch: Do not run datacage on artifacts that are loaded from datacage. His hopefully minimizes the datacage runs when a lot of data is loaded.
Thu, 24 Oct 2013 23:06:40 +0200 Tom Gottfried Importer doc: fix some layout issues.
Wed, 23 Oct 2013 17:20:55 +0200 Felix Wolfsteller Made SedimentDensityValue Serializable.
Wed, 23 Oct 2013 17:20:30 +0200 Felix Wolfsteller issue1345: Re-enable sediment load total loads, now that factory is fixed.
Wed, 23 Oct 2013 17:19:30 +0200 Felix Wolfsteller Fix total sediment load fetching.
Wed, 23 Oct 2013 17:08:07 +0200 Felix Wolfsteller issue1345: Showing sediment densitie by depth, comment total load.
Wed, 23 Oct 2013 14:53:47 +0200 Tom Gottfried Fix typo.
Wed, 23 Oct 2013 12:43:26 +0200 Andre Heinecke (issue965) Handle the case that diffids are not available
Wed, 23 Oct 2013 12:09:36 +0200 Felix Wolfsteller meta-data.xml: Be less restrictive in showing facets from waterlevels-discharge.
Wed, 23 Oct 2013 12:08:30 +0200 Felix Wolfsteller meta-data.xml: Exclude empty.facet s.
Wed, 23 Oct 2013 12:07:35 +0200 Felix Wolfsteller meta-meta.xml: Also fetch extreme_base curves via dc.
Wed, 23 Oct 2013 12:07:05 +0200 Felix Wolfsteller meta-data.xml: cosmetics.
Wed, 23 Oct 2013 11:41:24 +0200 Felix Wolfsteller Add another axis (height) to longitudinal-diagram-defaults.
Wed, 23 Oct 2013 11:33:31 +0200 Felix Wolfsteller meta-data.xml: Cosmetics.
Wed, 23 Oct 2013 11:22:47 +0200 Felix Wolfsteller meta-data.xml: More usage of collection-group-macro.
Wed, 23 Oct 2013 11:28:25 +0200 Sascha L. Teichmann Datacage: Consequently call macro 'longitudinal-section-user-prototype' in all longitudinal sections of old calculation. Moved asymmeterical stuff to prototype. This may crash!
Wed, 23 Oct 2013 11:04:06 +0200 Felix Wolfsteller meta-data.xml: Create and use collection-group macro.
Wed, 23 Oct 2013 09:59:46 +0200 Tom Gottfried BedHeightSingleParser: fix no-data-line detection.
Wed, 23 Oct 2013 08:20:11 +0200 Sascha L. Teichmann Datacage ref doc: More docs on functions.
Tue, 22 Oct 2013 17:00:47 +0200 Sascha L. Teichmann Datacage ref doc: More docs for functions.
Tue, 22 Oct 2013 16:24:08 +0200 Felix Wolfsteller issue1205: made SedimentDensity serializable.
Tue, 22 Oct 2013 15:51:33 +0200 Felix Wolfsteller meta-data.xml: Switch more longitudinal-section like user-dc content to prototype macro.
Tue, 22 Oct 2013 15:43:13 +0200 Sascha L. Teichmann Datacage: Fixed macro call.
Tue, 22 Oct 2013 15:34:51 +0200 Sascha L. Teichmann Fixed meta-data.xml
Tue, 22 Oct 2013 15:07:24 +0200 Sascha L. Teichmann Datacage ref doc: More doc for functions.
Tue, 22 Oct 2013 12:21:21 +0200 Felix Wolfsteller issue1512: Sort flow-velocity-models by discharge_zone.value.
Tue, 22 Oct 2013 12:15:33 +0200 Felix Wolfsteller issue1473: Show differences project name in dc.
Tue, 22 Oct 2013 11:57:17 +0200 Felix Wolfsteller meta-data.xml: Fix referenced out for discharge_longitudinal_section.
Mon, 21 Oct 2013 19:05:41 +0200 Andre Heinecke (issue965) Add a comment to explain what we do here
Mon, 21 Oct 2013 18:57:30 +0200 Andre Heinecke (issue965) Use new datacage magic to have year filtering for bedheights
Mon, 21 Oct 2013 17:54:34 +0200 Tom Gottfried Importer doc: mention flow direction retrieval from WST.
Mon, 21 Oct 2013 17:43:01 +0200 Sascha L. Teichmann Removed dc:to-date(). Added 'date' type for <dc:convert> instead.
Mon, 21 Oct 2013 12:21:40 +0200 Felix Wolfsteller issue1521: Adhere more to dc 'spec', show discharges of flow velocity models.
Mon, 21 Oct 2013 12:22:40 +0200 Sascha L. Teichmann Datacage reference doc: Explain dc:container-context and dc:properties.
Mon, 21 Oct 2013 11:43:50 +0200 Sascha L. Teichmann Datacage: Added TODOs for new functions in ref document.
Mon, 21 Oct 2013 11:28:14 +0200 Felix Wolfsteller issue1512: Make double entry of Q facet for flowvelocities dissappear.
Fri, 18 Oct 2013 16:41:10 +0200 Felix Wolfsteller Fix typo in german i18n.
Fri, 18 Oct 2013 12:20:55 +0200 Felix Wolfsteller issue1512: improved i18n for flow velocity measurement facets.
Thu, 17 Oct 2013 16:15:14 +0200 Felix Wolfsteller BedHeightProcessor: Finally display heights, not widths.
Thu, 17 Oct 2013 15:36:13 +0200 Felix Wolfsteller BedHeightProcessor: Set axis label.
Thu, 17 Oct 2013 15:36:00 +0200 Felix Wolfsteller BedHeight(Sounding)Processor: Use FacetTypes.
Thu, 17 Oct 2013 15:23:07 +0200 Felix Wolfsteller Removed debris.
Thu, 17 Oct 2013 15:21:57 +0200 Felix Wolfsteller Moved BedHeightEpoch to BedHeightEpochData.
Thu, 17 Oct 2013 15:08:59 +0200 Felix Wolfsteller Renamed artifacts/**/BedHeight(Single) to BedHeight(Single)Data, to resolve
Thu, 17 Oct 2013 11:12:14 +0200 Felix Wolfsteller Stub for new BedHeightProcessor.
Thu, 17 Oct 2013 10:53:34 +0200 Felix Wolfsteller BedHeightSoundingProcessor: Log if data is now handled.
Thu, 17 Oct 2013 10:50:04 +0200 Felix Wolfsteller BedHeightSoundingProcessor: refactored to avoid drifting behavior when using
Thu, 17 Oct 2013 09:40:12 +0200 Felix Wolfsteller meta-data.xml: cleanup longitudinal-section-user-prototype, removing dupes.
Mon, 21 Oct 2013 10:49:39 +0200 Sascha L. Teichmann Removed same package import.
Mon, 21 Oct 2013 10:48:51 +0200 Sascha L. Teichmann Removed obsolete import.
Fri, 18 Oct 2013 18:40:50 +0200 Sascha L. Teichmann Datacage: Add function dc:to-date(number) which converts a epoch base number to a date object.
Fri, 18 Oct 2013 18:36:18 +0200 Sascha L. Teichmann Datacage: Added dc:min-number(list) and dc:max-number(list) to extract the numerical
Fri, 18 Oct 2013 18:15:33 +0200 Sascha L. Teichmann Datacage: Add function dc:find-all(needle, haystack).
Fri, 18 Oct 2013 15:44:01 +0200 Andre Heinecke (issue1474) Fix deepCopy signatures and actually copy the facet index now
Fri, 18 Oct 2013 15:30:44 +0200 Andre Heinecke (issue1071) Handle the case where no MeasurementStation exists
Thu, 17 Oct 2013 18:56:44 +0200 Sascha L. Teichmann More datacage ref doc.
Thu, 17 Oct 2013 18:37:56 +0200 Andre Heinecke (issue1474) Fix copying of SQ* Facets
Thu, 17 Oct 2013 17:47:58 +0200 Tom Gottfried Importer: Avoid 0-lenght Q-ranges in WST-CSV-parsers.
Thu, 17 Oct 2013 15:26:12 +0200 Sascha L. Teichmann Replaced more tabs with spaces + minor cosmetics (removed out commented code from double precision branch).
Thu, 17 Oct 2013 15:13:32 +0200 Sascha L. Teichmann Replaced tabs with 4 spaces.
Thu, 17 Oct 2013 15:05:08 +0200 Tom Gottfried WstParser: Do not add Q-range for trailing Q-line.
Thu, 17 Oct 2013 12:14:10 +0200 Sascha L. Teichmann Removed obsolete imports.
Thu, 17 Oct 2013 12:11:09 +0200 Sascha L. Teichmann Removed obsolete import + whitespace cleanup.
Thu, 17 Oct 2013 08:29:46 +0200 Felix Wolfsteller Add getModelDescription to FlowVelocityModel.
Thu, 17 Oct 2013 07:48:51 +0200 Felix Wolfsteller White space cosmetics, added debug output.
Thu, 17 Oct 2013 07:46:36 +0200 Felix Wolfsteller SedimentYieldArtifact: Accept 'total' load, genreate facet for it.
Thu, 17 Oct 2013 07:45:41 +0200 Felix Wolfsteller FlowVelocityModelArtifact: Slightly improve facet names.
Thu, 17 Oct 2013 07:45:13 +0200 Felix Wolfsteller Cosmetics.
Thu, 17 Oct 2013 07:44:34 +0200 Felix Wolfsteller Cosmetics.
Thu, 17 Oct 2013 07:42:31 +0200 Felix Wolfsteller issue1473: Let vollmer curves appear under 'former calc/waterlevels from fix.'.
Thu, 17 Oct 2013 07:39:42 +0200 Felix Wolfsteller cosmetics.
Wed, 16 Oct 2013 15:25:56 +0200 Felix Wolfsteller Adjusted i18n to match the one in client.
Wed, 16 Oct 2013 18:48:02 +0200 Andre Heinecke Use more failsave pattern for SQ-facets.
Wed, 16 Oct 2013 18:46:43 +0200 Andre Heinecke Configure correct name for SQ-relation C-chart.
Wed, 16 Oct 2013 15:23:04 +0200 Felix Wolfsteller i18n for total load dc.
Wed, 16 Oct 2013 15:22:18 +0200 Felix Wolfsteller Offer total loads in dc.
Wed, 16 Oct 2013 15:21:14 +0200 Felix Wolfsteller Added i18n for upcoming total load via dc.
Wed, 16 Oct 2013 10:42:45 +0200 Felix Wolfsteller Refactoring: Move functionality of BedHeightAccess into BedHeightFacet for now.
Wed, 16 Oct 2013 10:33:09 +0200 Felix Wolfsteller Minor BedHeightAccess refactoring.
Wed, 16 Oct 2013 14:43:27 +0200 Tom Gottfried Remove code that was previously commented out.
Wed, 16 Oct 2013 14:40:19 +0200 Tom Gottfried BedHeightSingleParser: do not omit lines if last column is empty.
Wed, 16 Oct 2013 13:06:30 +0200 Sascha L. Teichmann Jim, he's dead. double-precision
Wed, 16 Oct 2013 13:03:13 +0200 Sascha L. Teichmann Merged double-precision branch.
Wed, 16 Oct 2013 12:57:40 +0200 Sascha L. Teichmann Merge branch default double-precision
Wed, 16 Oct 2013 12:39:33 +0200 Sascha L. Teichmann Reorder generation of static part of describe document for fast XML DOM handling.
Wed, 16 Oct 2013 12:00:29 +0200 Andre Heinecke (issue1353) Document that there are more things to syncing then just the Number
Wed, 16 Oct 2013 11:45:23 +0200 Andre Heinecke (issue1474) Add sqrelation user data and disable filtering for it
Wed, 16 Oct 2013 11:42:53 +0200 Andre Heinecke Add debug output for variables in user context
Tue, 15 Oct 2013 17:01:20 +0200 Andre Heinecke Break sometimes when dumping variables. Still ugly but a bit nicer.
Wed, 16 Oct 2013 10:18:19 +0200 Tom Gottfried Importer doc: fix syntax error. double-precision
Wed, 16 Oct 2013 09:56:15 +0200 Tom Gottfried BedHeightSingleParser: do not log every data line in file. double-precision
Tue, 15 Oct 2013 19:49:25 +0200 Tom Gottfried Do not log trace of WST-Parser parse exception and document it. double-precision
Tue, 15 Oct 2013 19:19:45 +0200 Tom Gottfried WST-Parser: check consistence of station ordering in file. double-precision
Tue, 15 Oct 2013 19:18:44 +0200 Tom Gottfried Comments. double-precision
Tue, 15 Oct 2013 18:41:55 +0200 Tom Gottfried Merged changes from default into double precision branch. double-precision
Tue, 15 Oct 2013 18:31:59 +0200 Sascha L. Teichmann WST Import: Added parse error exception to WST parser.
Tue, 15 Oct 2013 17:39:04 +0200 Felix Wolfsteller typo fix in doc.
Tue, 15 Oct 2013 17:38:50 +0200 Felix Wolfsteller BedHeightsArtifact: Use FacetTypes, eliminate local facet type definition.
Tue, 15 Oct 2013 17:31:44 +0200 Felix Wolfsteller Prepare new facet types for bedheights.
Tue, 15 Oct 2013 16:41:18 +0200 Felix Wolfsteller i18n for old calculations dc.
Tue, 15 Oct 2013 15:32:36 +0200 Tom Gottfried Importer manual: use unique revision identifier. double-precision
Tue, 15 Oct 2013 15:37:54 +0200 Felix Wolfsteller Add aforementioned user-prototype.
Tue, 15 Oct 2013 15:37:24 +0200 Felix Wolfsteller Prototypically add longitudinal-section-user-prototype, with issues.
Tue, 15 Oct 2013 15:25:09 +0200 Tom Gottfried Importer packaging: run pdflatex three times to get references and page numbering right. double-precision
Tue, 15 Oct 2013 15:06:29 +0200 Felix Wolfsteller issue1345: Show bedheight_type in tooltip.
Tue, 15 Oct 2013 15:03:51 +0200 Felix Wolfsteller issue1345: Bring back waterlevel/diffs from fixation into minfo dc element.
Tue, 15 Oct 2013 14:41:39 +0200 Felix Wolfsteller Fix DC group-by statement, there is no 'oid' variable around.
Tue, 15 Oct 2013 07:06:19 +0200 Felix Wolfsteller issue1345: DC: group bed heights of single years by year.
Tue, 15 Oct 2013 14:45:46 +0200 Tom Gottfried Importer: skip historical discharge tables per default as they come via ETL. double-precision
Tue, 15 Oct 2013 10:11:38 +0200 Tom Gottfried Add warning on errors when importing duplicates. double-precision
Mon, 14 Oct 2013 17:41:19 +0200 Felix Wolfsteller issue1345: Fix sediment load facet type, adjust theme name.
Mon, 14 Oct 2013 17:40:31 +0200 Felix Wolfsteller have same translations for sediment loads fractions.
Mon, 14 Oct 2013 16:38:16 +0200 Sascha L. Teichmann Datacage doc ref: Explain dc:group
Mon, 14 Oct 2013 16:06:36 +0200 Sascha L. Teichmann Datacage ref doc: Explain dc:filter.
Mon, 14 Oct 2013 15:55:36 +0200 Sascha L. Teichmann Datacage ref doc: Move dc:if & dc:choose up because they are more important than other elements.
Mon, 14 Oct 2013 15:53:06 +0200 Sascha L. Teichmann Datacage ref doc: Explain dc:for-each
Mon, 14 Oct 2013 15:43:34 +0200 Sascha L. Teichmann Datacage ref doc: Explain dc:virtual-column.
Mon, 14 Oct 2013 15:27:49 +0200 Sascha L. Teichmann Datacage ref doc: Explain dc:macro & Co.
Mon, 14 Oct 2013 14:40:51 +0200 Sascha L. Teichmann Datacage ref doc: Explain dc:variable and dc:convert.
Mon, 14 Oct 2013 13:44:54 +0200 Sascha L. Teichmann Dataage ref doc: Explain dc:context, dc:comment
Mon, 14 Oct 2013 13:08:33 +0200 Sascha L. Teichmann Datacage ref doc: More structure. Explain text interpolation.
Mon, 14 Oct 2013 12:16:33 +0200 Felix Wolfsteller Added sedimentdensity i18n.
Mon, 14 Oct 2013 12:15:34 +0200 Felix Wolfsteller issue1345: Added getDepth() to SedimentDensityFactory.
Mon, 14 Oct 2013 12:14:20 +0200 Felix Wolfsteller issue1345: Change Sediment Density Facet label.
Mon, 14 Oct 2013 11:49:15 +0200 Felix Wolfsteller SedimentDensityProcessor: Fix, use getAllDensities instead of only dens. in year 2006.
Mon, 14 Oct 2013 11:48:38 +0200 Felix Wolfsteller SedimentDensity: Fix getAllDensities and made it public.
Mon, 14 Oct 2013 10:01:33 +0200 Felix Wolfsteller i18n for dc and facet name generation.
Mon, 14 Oct 2013 09:55:41 +0200 Felix Wolfsteller cosmetics.
Mon, 14 Oct 2013 09:53:54 +0200 Felix Wolfsteller issue1345: Adjust name of sediment yield/load facets to include fraction name and times.
Mon, 14 Oct 2013 09:52:17 +0200 Felix Wolfsteller issue1345: Prepare SedimentLoadFactory to deliver fraction name and time ranges.
Mon, 14 Oct 2013 09:51:27 +0200 Felix Wolfsteller cosmetics.
Mon, 14 Oct 2013 07:33:32 +0200 Felix Wolfsteller Comment in meta-data.xml.
Mon, 14 Oct 2013 07:31:32 +0200 Felix Wolfsteller cosmetical description fix.
Sat, 12 Oct 2013 10:26:45 +0200 Sascha L. Teichmann Removed obsolete imports.
Fri, 11 Oct 2013 18:40:33 +0200 Andre Heinecke (issue1529) Be more tolerant in the fitting.
Fri, 11 Oct 2013 17:11:15 +0200 Andre Heinecke (issue1529) Only interpolate within a step limit in WQ diagram
Fri, 11 Oct 2013 15:35:25 +0200 Andre Heinecke Polish SQ Datacage and Facets
Fri, 11 Oct 2013 12:44:25 +0200 Felix Wolfsteller doc fix <3 .
Fri, 11 Oct 2013 12:40:52 +0200 Felix Wolfsteller doc fix.
Fri, 11 Oct 2013 12:38:57 +0200 Felix Wolfsteller Doc typo fix.
Fri, 11 Oct 2013 12:26:00 +0200 Felix Wolfsteller issue1345: include fix for display of epochs stoptime.
Fri, 11 Oct 2013 12:23:27 +0200 Felix Wolfsteller issue1512: conf.xml: configure flowvelocitymodel artifact-factory.
Fri, 11 Oct 2013 12:22:40 +0200 Felix Wolfsteller issue1512: Adde flow-velocity-models dc conf.
Fri, 11 Oct 2013 12:18:38 +0200 Felix Wolfsteller issue1345: Added accidentally ommitted i18n for sedimentload dc.
Fri, 11 Oct 2013 12:15:01 +0200 Felix Wolfsteller issue1512: spawn more facets for FlowVelocityMeasurementArtifact .
Fri, 11 Oct 2013 12:12:52 +0200 Felix Wolfsteller issue1512: Adjusted Q and WOutProcessors to handle data
Fri, 11 Oct 2013 11:44:21 +0200 Felix Wolfsteller More doc fixes.
Fri, 11 Oct 2013 11:42:56 +0200 Felix Wolfsteller Processor: Doc.
Fri, 11 Oct 2013 10:30:26 +0200 Felix Wolfsteller issue1512: Added method to get FlowVelocityModel by id.
Fri, 11 Oct 2013 10:29:37 +0200 Felix Wolfsteller issue1512: Initial commit of FlowVelocityModelArtifact.
Fri, 11 Oct 2013 10:28:07 +0200 Felix Wolfsteller issue1512: FlowVelocityCalculation: Opened prepareData(), added doc.
Fri, 11 Oct 2013 10:26:18 +0200 Felix Wolfsteller issue1512: Added comment, opened constructor as we will reuse this class.
Fri, 11 Oct 2013 10:25:34 +0200 Felix Wolfsteller issue1512: Prepare new facet types for flow velocity model facet, add comment.
Thu, 10 Oct 2013 18:34:04 +0200 Sascha L. Teichmann Fixings overview panel: Send valid encoded JSON filters to server part of the client.
Thu, 10 Oct 2013 11:27:56 +0200 Felix Wolfsteller issue1345: Factored out description creation for loads. Make epochs show end time.
Thu, 10 Oct 2013 11:22:16 +0200 Felix Wolfsteller issue1345: Added macro for the differing epoch-description, extended query.
Thu, 10 Oct 2013 11:19:30 +0200 Felix Wolfsteller issue1345: Minor refactoring, made structure for epoch loads equal year loads.
Thu, 10 Oct 2013 11:10:50 +0200 Felix Wolfsteller issue1345: Show fraction and year for sediment load dc subtree.
Thu, 10 Oct 2013 09:49:01 +0200 Felix Wolfsteller Revert 7273, add undefined macro to meta-data.xml.
Wed, 09 Oct 2013 17:56:39 +0200 Tom Gottfried Remove annotations from reference curve recommendations. There is no km-axis.
Wed, 09 Oct 2013 16:33:56 +0200 Sascha L. Teichmann DC: Remove accidentaly used user-macro from system-content part.
Wed, 09 Oct 2013 16:20:33 +0200 Sascha L. Teichmann Removed calls to undefined macro.
Wed, 09 Oct 2013 16:19:13 +0200 Sascha L. Teichmann Removed duplicate macro.
Wed, 09 Oct 2013 16:17:22 +0200 Sascha L. Teichmann Added check for duplicate macros.
Wed, 09 Oct 2013 13:05:37 +0200 Sascha L. Teichmann Little workaround not to crash uf there is no theme style. TODO: Figure out why the theme style is null at this point.
Wed, 09 Oct 2013 12:46:40 +0200 Tom Gottfried fixed typo.
Wed, 09 Oct 2013 12:15:09 +0200 Sascha L. Teichmann Vollmer curve: Added facet for generating error report.
Wed, 09 Oct 2013 11:20:06 +0200 Felix Wolfsteller meta-data.xml: Add more entries to discharge datacage ('user-part').
Wed, 09 Oct 2013 10:03:00 +0200 Felix Wolfsteller meta-data.xml: Let DC show (yet all) computed discharge curves as former calculations.
Wed, 09 Oct 2013 10:01:00 +0200 Felix Wolfsteller meta-data.xml: Refactored discharge-curve-prototype.
Wed, 09 Oct 2013 09:57:49 +0200 Felix Wolfsteller meta-data.xml: Add a macro to load previous discharge calculations.
Tue, 08 Oct 2013 15:24:33 +0200 Felix Wolfsteller BedHeightsArtifact: Import 'river' data, for use in "New Chart"-settings.
Tue, 08 Oct 2013 15:23:51 +0200 Felix Wolfsteller RangeAccess: Use min/max as from/to in RangeAccess.
Tue, 08 Oct 2013 14:50:58 +0200 Felix Wolfsteller Refactoring: Let RiverAccess.getRiver return an River.
Tue, 08 Oct 2013 12:07:18 +0200 Felix Wolfsteller issue1490: Fix text annotations of latest points.
Tue, 08 Oct 2013 11:49:28 +0200 Felix Wolfsteller issue1490: Translate other points as well, when at gauge.
Tue, 08 Oct 2013 09:26:09 +0200 Felix Wolfsteller issue1490: Translate text annotations position when displaying w/q- curve at gauge.
Tue, 08 Oct 2013 09:00:45 +0200 Felix Wolfsteller Minor code simplification.
Mon, 07 Oct 2013 11:13:40 +0200 Sascha L. Teichmann ETL: Added repair XSLT script to rename value of GEWAESSER attribute 'Untere Havel-Wasserstraße (UHW)' with 'Havel'.
Sun, 06 Oct 2013 15:15:45 +0200 Sascha L. Teichmann First draft of a german reference document for datacage elements and functions written in reStructuredText. Lots of TODOs.
Sat, 05 Oct 2013 17:52:16 +0200 Sascha L. Teichmann Reduce usage of careless 'for (int i = 0; i < x.size(); i++)' pattern.
Sat, 05 Oct 2013 12:49:53 +0200 Sascha L. Teichmann Repaced some tabs by spaces.
Sat, 05 Oct 2013 12:48:44 +0200 Sascha L. Teichmann Replaced some tabs by spaces. Guys, please configure your editors not to insert tabs!
Sat, 05 Oct 2013 12:19:54 +0200 Sascha L. Teichmann Removed trailing whitespace.
Sat, 05 Oct 2013 12:17:23 +0200 Sascha L. Teichmann Removed trailing whitespace.
Sat, 05 Oct 2013 12:16:02 +0200 Sascha L. Teichmann Remove obsolete same package import.
Sat, 05 Oct 2013 12:13:14 +0200 Sascha L. Teichmann Removed trailing whitespace.
Sat, 05 Oct 2013 12:06:25 +0200 Sascha L. Teichmann Remove obsolete import.
Fri, 04 Oct 2013 18:35:05 +0200 Andre Heinecke Check for inverted setting later.
Fri, 04 Oct 2013 18:33:44 +0200 Sascha L. Teichmann Code simplification + moved code out of inner loop.
Fri, 04 Oct 2013 18:21:25 +0200 Andre Heinecke Remove boundToOut facet pass. This is now only done if we filtered before.
Fri, 04 Oct 2013 18:00:29 +0200 Andre Heinecke Fix SQOverview the new generators need the master artifact set.
Fri, 04 Oct 2013 17:56:02 +0200 Andre Heinecke Polish labels and remove unused classes. SQOverview is currently broken.
Fri, 04 Oct 2013 17:02:01 +0200 Andre Heinecke Add new option to diagram axes "logarithmic" that can be set to an evaluator
Fri, 04 Oct 2013 17:00:05 +0200 Andre Heinecke Add SQRelation Processor
Fri, 04 Oct 2013 16:59:30 +0200 Andre Heinecke Configure SQ Relations to use new diagram way
Wed, 02 Oct 2013 18:27:14 +0200 Andre Heinecke Remove SQ Generator Subclasses for A-F
Wed, 02 Oct 2013 18:26:22 +0200 Andre Heinecke Remove obsolete classes
Wed, 02 Oct 2013 17:04:23 +0200 Andre Heinecke (issue1474) Add datacage loading for SQ Relations
Tue, 01 Oct 2013 17:10:55 +0200 Andre Heinecke Silence overly spammy debug output
Fri, 04 Oct 2013 12:16:37 +0200 Felix Wolfsteller Removed TODO which was already done.
Fri, 04 Oct 2013 11:59:26 +0200 Felix Wolfsteller issue1345: call longitudinal-section-prototype macro for flow-veloc. DC. Added todo.
Fri, 04 Oct 2013 11:37:50 +0200 Felix Wolfsteller issue 1345: Let sediment-load dc-config call longitdunal-section-prototype macro.
Fri, 04 Oct 2013 11:11:48 +0200 Felix Wolfsteller issue1345: Also let bed-quality use longitudinal-section-prototype.
Fri, 04 Oct 2013 10:52:07 +0200 Felix Wolfsteller issue1345: adjust dc-conf for befheight-diffs: is now longitudinal-section-prototype.
Fri, 04 Oct 2013 07:49:21 +0200 Felix Wolfsteller issue1345: meta-data.xml: For bedheight_middle, use the longitudinal-section-prototype.
Wed, 02 Oct 2013 23:11:59 +0200 Sascha L. Teichmann Global facet filtering with bound to out: The DiagramAttributes implements the FacetFilter and not the Generators.
Wed, 02 Oct 2013 19:24:43 +0200 Sascha L. Teichmann Use diagram configuration and there processors to define compatible facets in loaded data.
Wed, 02 Oct 2013 18:41:12 +0200 Sascha L. Teichmann Made lookup for generators a class of its own. First step to use it as a compat filter for facets, too.
Wed, 02 Oct 2013 14:14:09 +0200 Felix Wolfsteller meta-meta.xml: remove debugging info content.
Wed, 02 Oct 2013 14:13:19 +0200 Felix Wolfsteller issue1345: add flowvelocity-macro to winfo longitudinal-section.
Wed, 02 Oct 2013 11:44:23 +0200 Felix Wolfsteller issue1435: DC layout for sediment-loads more the way its requested.
Tue, 01 Oct 2013 18:46:30 +0200 Tom Gottfried WST-parser: making ranges tightly fit was broken since a<b was enforced. Re-enabled. double-precision
Tue, 01 Oct 2013 18:32:01 +0200 Tom Gottfried Range importer: Do not allow to set invalid a or b. double-precision
Tue, 01 Oct 2013 10:06:11 +0200 Felix Wolfsteller issue1435: For Sediment Density Facets, use densities name/description.
Tue, 01 Oct 2013 10:03:20 +0200 Felix Wolfsteller issue1435: SedimentDensityFactory: Changed variable name of query to reflect
Tue, 01 Oct 2013 10:01:00 +0200 Felix Wolfsteller issue1435: Add bedheights and morph. width to LS DC conf.
Tue, 01 Oct 2013 09:50:53 +0200 Andre Heinecke (issue1353) Document station check and warn message
Tue, 01 Oct 2013 05:58:47 +0200 Sascha L. Teichmann Bring themes back into sync.
Mon, 30 Sep 2013 17:41:15 +0200 Felix Wolfsteller Doc.
Mon, 30 Sep 2013 17:40:42 +0200 Felix Wolfsteller Initial commit of sediment density processor.
Mon, 30 Sep 2013 17:40:04 +0200 Felix Wolfsteller FlowVelocityGenerator: Simplify code a bit, master and its river is
Mon, 30 Sep 2013 17:38:11 +0200 Felix Wolfsteller SedimentDensityFactory: query densities by id only (not year).
Mon, 30 Sep 2013 17:36:44 +0200 Felix Wolfsteller issue1435: Add sedimentyield and sedimentdensity artifact factories to conf.xml.
Mon, 30 Sep 2013 17:35:43 +0200 Felix Wolfsteller i18n for densities.
Mon, 30 Sep 2013 17:33:29 +0200 Felix Wolfsteller issue1435: Call densities-macro of meta-data.xml thus show densities in datacage.
Mon, 30 Sep 2013 17:32:47 +0200 Felix Wolfsteller issue1435: Add densities-macro to meta-data.xml .
Mon, 30 Sep 2013 17:32:04 +0200 Felix Wolfsteller issue1435: Add SedimentDensityProcessor to longitudinal-diagram-defaults.xml to
Mon, 30 Sep 2013 17:31:10 +0200 Felix Wolfsteller issue1435: SedimentDensityFacet: Access sediment density data.
Mon, 30 Sep 2013 17:30:48 +0200 Felix Wolfsteller Cleaned imports.
Mon, 30 Sep 2013 17:30:31 +0200 Felix Wolfsteller issue1435: Store id of sediment yield only.
Mon, 30 Sep 2013 17:30:06 +0200 Felix Wolfsteller Cleaned imports.
Mon, 30 Sep 2013 17:29:47 +0200 Felix Wolfsteller Cleaned imports, added todo about naming.
Mon, 30 Sep 2013 17:29:26 +0200 Felix Wolfsteller issue1435: Added new sediment.density facet type.
Mon, 30 Sep 2013 17:28:58 +0200 Felix Wolfsteller issue1435: Add methods to get data in StyledSeriesBuilder-friendly format, doc.
Mon, 30 Sep 2013 09:38:09 +0200 Felix Wolfsteller issue1435: Stubs for SedimentDensityFacet and -Artifact.
Mon, 30 Sep 2013 09:08:50 +0200 Felix Wolfsteller issue1435: Prepare SedimentDensityFactory to delive data by sedimentdesity.id and .year.
Mon, 30 Sep 2013 07:40:19 +0200 Felix Wolfsteller Doc fix.
Mon, 30 Sep 2013 06:58:09 +0200 Felix Wolfsteller SedimentYieldArtifact: Removed unneeded documentation, removed but added one TODO.
Fri, 27 Sep 2013 22:09:12 +0200 Felix Wolfsteller issue1435: Remove hardcoded river for dc sediment yield sql query.
Fri, 27 Sep 2013 17:45:18 +0200 Tom Gottfried Remove method which was accidentally merged back from default. double-precision
Fri, 27 Sep 2013 17:36:50 +0200 Tom Gottfried Merged changes from default into double-precision branch. double-precision
Fri, 27 Sep 2013 16:17:03 +0200 Felix Wolfsteller Added accidentally omitted i18n.
Fri, 27 Sep 2013 16:13:54 +0200 Felix Wolfsteller issue1435: In DC conf, show sedimentyields in yield/[year|epoch]- structure, i18n.
Fri, 27 Sep 2013 14:42:03 +0200 Felix Wolfsteller issue1435: meta-data.xml: Add sedimentload/yield- part to minfo part of dc.
Fri, 27 Sep 2013 14:40:39 +0200 Felix Wolfsteller SedimentLoadProcessor: Add debug output when handling an out.
Fri, 27 Sep 2013 14:39:46 +0200 Felix Wolfsteller Doc.
Fri, 27 Sep 2013 14:39:07 +0200 Felix Wolfsteller StaticState: doc.
Fri, 27 Sep 2013 14:37:28 +0200 Felix Wolfsteller issue1435: SedimentYieldArtifact: Add functionality.
Fri, 27 Sep 2013 14:36:05 +0200 Felix Wolfsteller SedimentLoadFactory: Added method to quickly get the description of a given load.
Fri, 27 Sep 2013 14:35:42 +0200 Felix Wolfsteller SedimentLoadFactory: Fix query, added comment about correctness of
Fri, 27 Sep 2013 12:11:54 +0200 Sascha L. Teichmann flys/issue1500: The main wst file determines km_up now.
Thu, 26 Sep 2013 22:03:27 +0200 Felix Wolfsteller Initial commit for untested standalone sediment yield artifact.
Thu, 26 Sep 2013 21:44:53 +0200 Felix Wolfsteller issue1435: Add method to SedimentLoadFactory to fetch a SedimentLoad by id.
Thu, 26 Sep 2013 21:30:19 +0200 Felix Wolfsteller issue1435: Minor refactoring that will come handy to load SedimentLoads
Thu, 26 Sep 2013 19:55:49 +0200 Andre Heinecke Added tag 3.0.16 for changeset 12248d9eb326
Thu, 26 Sep 2013 19:15:17 +0200 Andre Heinecke Only filter the facets for unbound outs 3.0.16
Thu, 26 Sep 2013 19:14:37 +0200 Andre Heinecke Fix wrong usage of a_id and add more datacage stuff to WSPL longitundinal
Thu, 26 Sep 2013 19:13:42 +0200 Andre Heinecke Fix Y-Axis order for default longituidnals
Thu, 26 Sep 2013 19:02:36 +0200 Andre Heinecke Save target_out in the recommendation to ensure it is sent to the server
Thu, 26 Sep 2013 17:31:25 +0200 Tom Gottfried Filter waterleveldifferences according to unit.
Thu, 26 Sep 2013 16:18:55 +0200 Tom Gottfried Filter prefix of descriptions of MINFO-WSTs.
Thu, 26 Sep 2013 16:17:36 +0200 Tom Gottfried Move MINFO-fixation-stuff to MINFO-datacage and give specified names.
Thu, 26 Sep 2013 13:56:54 +0200 Felix Wolfsteller issue1435: Group minfo-stuff in dc, include waterlevels from csv.
Thu, 26 Sep 2013 13:02:02 +0200 Sascha L. Teichmann Removed obsolete imports.
Thu, 26 Sep 2013 12:56:30 +0200 Andre Heinecke Factor out longitudinal section default config and put it in its own file
Thu, 26 Sep 2013 12:22:22 +0200 Andre Heinecke Saveguard range access in case an artifact has no range
Thu, 26 Sep 2013 12:22:01 +0200 Andre Heinecke Add debug output triggered by debugging the last commit
Thu, 26 Sep 2013 12:21:34 +0200 Andre Heinecke TRUE != FALSE ;)
Thu, 26 Sep 2013 12:21:11 +0200 Andre Heinecke Add ShearStress Processor
Thu, 26 Sep 2013 10:39:38 +0200 Andre Heinecke Cosmetics
Thu, 26 Sep 2013 10:39:01 +0200 Andre Heinecke Handle flow velocity discharge in the new part of the QOutProcessor
Thu, 26 Sep 2013 10:38:21 +0200 Andre Heinecke Handle flow velocity measurements in the FlowVelocity processor
Thu, 26 Sep 2013 10:37:24 +0200 Andre Heinecke Handle flow velocity annotation in annoation processor
Thu, 26 Sep 2013 12:56:37 +0200 Sascha L. Teichmann Diagram attributes: Use evaluators for title arguments, too. This makes it more consistent, powerful and a little bit faster.
Thu, 26 Sep 2013 11:41:02 +0200 Sascha L. Teichmann Removed obsolete imports.
Thu, 26 Sep 2013 09:59:23 +0200 Andre Heinecke Use LongitudinalSectionGenerator2 in the LS diagrams.
Thu, 26 Sep 2013 09:58:06 +0200 Andre Heinecke Add startkm and endkm setting to longitudinal section generator 2
Wed, 25 Sep 2013 18:04:49 +0200 Andre Heinecke Add NPE guard to XYStyle.
Wed, 25 Sep 2013 18:04:14 +0200 Andre Heinecke Add FlowVelocity Processor
Wed, 25 Sep 2013 18:03:34 +0200 Andre Heinecke Configure SedimentLoad to use the new diagram Generator
Wed, 25 Sep 2013 17:40:43 +0200 Andre Heinecke Add SedimentLoadProcessor
Thu, 26 Sep 2013 08:38:12 +0200 Felix Wolfsteller Noted insights.
Wed, 25 Sep 2013 16:28:23 +0200 Felix Wolfsteller issue1493: Also transform NaN X values to empty string.
Wed, 25 Sep 2013 16:01:50 +0200 Andre Heinecke Configure BedQuality to use new DiagramGenerator
Wed, 25 Sep 2013 16:01:22 +0200 Andre Heinecke Remove obsolete classes
Wed, 25 Sep 2013 15:57:50 +0200 Andre Heinecke Add BedQuality Processors
Wed, 25 Sep 2013 15:08:48 +0200 Andre Heinecke Configure bed_difference_year in the new way
Wed, 25 Sep 2013 15:08:18 +0200 Andre Heinecke Add label for bed difference axis
Wed, 25 Sep 2013 15:07:41 +0200 Andre Heinecke Add BedWidthProcessor to handle width facets
Wed, 25 Sep 2013 13:09:45 +0200 Andre Heinecke Rename BedWidthProcessor to BedHeightSounding processor.
Wed, 25 Sep 2013 12:36:19 +0200 Sascha L. Teichmann Diagrams: Determine if axis should be inverted dynamically.
Wed, 25 Sep 2013 12:33:22 +0200 Andre Heinecke Configure BedDiffYear diagram and remove old generator
Wed, 25 Sep 2013 12:23:41 +0200 Felix Wolfsteller Doc.
Wed, 25 Sep 2013 12:22:46 +0200 Felix Wolfsteller issue971: Include encoding parameter hardwiredly in csv export panels
Wed, 25 Sep 2013 12:21:45 +0200 Felix Wolfsteller issue971: Let ExportServiceImpl handle encoding parameter,
Wed, 25 Sep 2013 12:20:49 +0200 Felix Wolfsteller issue971: For diagram csv export request windows-1252 encoded output.
Wed, 25 Sep 2013 12:20:01 +0200 Felix Wolfsteller issue971: Prepare client to include encoding in download url.
Wed, 25 Sep 2013 11:48:54 +0200 Felix Wolfsteller issue971: Let ChartOutputServiceImpl interprete an "encoding" parameter.
Wed, 25 Sep 2013 11:48:10 +0200 Felix Wolfsteller Doc.
Mon, 23 Sep 2013 11:40:11 +0200 Felix Wolfsteller Full stop at doc sentence end.
Wed, 25 Sep 2013 11:57:38 +0200 Andre Heinecke Fix diagram title
Wed, 25 Sep 2013 11:57:08 +0200 Andre Heinecke Remove obsolete MiddleBedHeightGenerator classes
Wed, 25 Sep 2013 11:53:45 +0200 Andre Heinecke Configure MiddleBedHeight diagram
Wed, 25 Sep 2013 11:52:05 +0200 Andre Heinecke Remove wrong docstring
Wed, 25 Sep 2013 11:51:47 +0200 Andre Heinecke Also handle bed height annotations
Wed, 25 Sep 2013 11:51:22 +0200 Andre Heinecke Rename BedheightProcessor to BedWidthProcessor
Wed, 25 Sep 2013 11:47:45 +0200 Andre Heinecke Add axis label to bedheight processor.
Wed, 25 Sep 2013 10:25:10 +0200 Andre Heinecke Add MiddleBedHeightProcessor
Wed, 25 Sep 2013 10:01:38 +0200 Andre Heinecke Add dW handling also to the other new longitudinal section diagrams
Tue, 24 Sep 2013 18:37:41 +0200 Andre Heinecke Configure Longitudinal section diagram to use the new way.
Tue, 24 Sep 2013 18:36:43 +0200 Andre Heinecke Add currentKM context / request mapping to RiverUtils and use it in DiagramGenerator
Tue, 24 Sep 2013 18:35:21 +0200 Andre Heinecke Handle multiple processors for axis labeling.
Tue, 24 Sep 2013 18:33:30 +0200 Andre Heinecke Cosmetics
Tue, 24 Sep 2013 18:32:55 +0200 Andre Heinecke Add DeltaWProcessor to process data for a delta W axis.
Tue, 24 Sep 2013 18:13:51 +0200 Andre Heinecke Fix area label rendering.
Tue, 24 Sep 2013 16:23:18 +0200 Sascha L. Teichmann Removed obsolete imports. Minor code cosmetics.
Tue, 24 Sep 2013 12:32:08 +0200 Andre Heinecke Close generator-refactoring generator-refactoring
Tue, 24 Sep 2013 12:29:44 +0200 Andre Heinecke Merge branch generator-refectoring into default.
Tue, 24 Sep 2013 12:25:36 +0200 Andre Heinecke Migrate w_differences and remove unused classes generator-refactoring
Tue, 24 Sep 2013 11:43:21 +0200 Andre Heinecke Actually commit the canHandle part of the last revision. (WQCKms in WOut proc.) generator-refactoring
Tue, 24 Sep 2013 11:42:04 +0200 Andre Heinecke Process corrected WQkms (WQCKms) also in the WOutProcessor generator-refactoring
Tue, 24 Sep 2013 11:40:43 +0200 Andre Heinecke Fix applying the inversion of diagrams. generator-refactoring
Tue, 24 Sep 2013 11:38:07 +0200 Andre Heinecke Migrate discharge_longitudinal_section generator to the new architecture. generator-refactoring
Tue, 24 Sep 2013 11:30:06 +0200 Andre Heinecke Reactivate CALCULATION_DISCHARGE_LONGITUDINAL_CURVE generator-refactoring
Tue, 24 Sep 2013 11:29:18 +0200 Andre Heinecke Also handle subtypes of Discharge longitundial Q facets. generator-refactoring
Tue, 24 Sep 2013 11:28:29 +0200 Andre Heinecke Default to the label of longitundial Q axis in the QProcessor generator-refactoring
Tue, 24 Sep 2013 11:27:28 +0200 Andre Heinecke Handle axis include zero setting for the new processing architecture generator-refactoring
Tue, 24 Sep 2013 11:26:45 +0200 Andre Heinecke Minor cleanup / doc generator-refactoring
Mon, 23 Sep 2013 16:41:12 +0200 Andre Heinecke Add refactored LongitudinalSectionGenerator2 that inherits DiagramGenerator generator-refactoring
Mon, 23 Sep 2013 16:00:02 +0200 Andre Heinecke Add more Inversion logic to the DiagramGenerator generator-refactoring
Mon, 23 Sep 2013 15:55:09 +0200 Andre Heinecke Add AxisLabel handling to WDiffProcessor generator-refactoring
Mon, 23 Sep 2013 15:46:05 +0200 Andre Heinecke Add WDiffProcessor generator-refactoring
Mon, 23 Sep 2013 15:30:46 +0200 Andre Heinecke Add AreaProcessor generator-refactoring
Mon, 23 Sep 2013 16:08:04 +0200 Sascha L. Teichmann Added diagram attributes as converter to longitudinal section diagrams. generator-refactoring
Mon, 23 Sep 2013 12:28:22 +0200 Sascha L. Teichmann Use pre-converted diagram attributes now. generator-refactoring
Mon, 23 Sep 2013 12:21:59 +0200 Andre Heinecke Fix domain axis label and add manualpoints processor to config generator-refactoring
Mon, 23 Sep 2013 12:21:08 +0200 Andre Heinecke Move manual point handling into a Processor generator-refactoring
Mon, 23 Sep 2013 12:20:27 +0200 Andre Heinecke Add useful debug output for diagram generator debugging generator-refactoring
Mon, 23 Sep 2013 11:37:13 +0200 Felix Wolfsteller issue1493: Don't let NaNs slip through csv export.
Mon, 23 Sep 2013 11:24:17 +0200 Felix Wolfsteller Minor refactoring for 1493.
Mon, 23 Sep 2013 10:24:47 +0200 Andre Heinecke Add DiagramGenerator doOut function generator-refactoring
Mon, 23 Sep 2013 10:23:21 +0200 Andre Heinecke Add DiagramGenerator doOut function generator-refactoring
Mon, 23 Sep 2013 10:22:52 +0200 Andre Heinecke Simplify code to prepare DiagramGenerator signature generator-refactoring
Mon, 23 Sep 2013 10:21:59 +0200 Andre Heinecke Add more proessors to longitudinal diagram generator-refactoring
Mon, 23 Sep 2013 09:25:04 +0200 Andre Heinecke Remove accidental commited debug line generator-refactoring
Sun, 22 Sep 2013 21:29:35 +0200 Sascha L. Teichmann Removed obsolete imports. generator-refactoring
Sun, 22 Sep 2013 21:05:12 +0200 Sascha L. Teichmann Use Object instead of DOM Element as argument for setup of out generators. First step to remove dependency to XML DOM when using configuration. generator-refactoring
Sun, 22 Sep 2013 17:15:15 +0200 Sascha L. Teichmann Little workaround to make diagram attribute parsing more thread safe. This is not the right solution. generator-refactoring
Sun, 22 Sep 2013 17:07:17 +0200 Sascha L. Teichmann Moved generators to separate xml file. generator-refactoring
Fri, 20 Sep 2013 19:18:04 +0200 Andre Heinecke Implement Label handling generator-refactoring
Fri, 20 Sep 2013 19:17:49 +0200 Andre Heinecke Add info generator for refactored generators generator-refactoring
Fri, 20 Sep 2013 17:58:30 +0200 Andre Heinecke Remove generator2 hacks generator-refactoring
Fri, 20 Sep 2013 17:36:11 +0200 Andre Heinecke Simplyfy / unify "invert axis" logic generator-refactoring
Fri, 20 Sep 2013 17:04:37 +0200 Sascha L. Teichmann Removed faked ChartInfoGenerator2 and LS Info generator. generator-refactoring
Fri, 20 Sep 2013 17:00:59 +0200 Sascha L. Teichmann ChartGenerator2 can be used as ChartInfoGenerator, too. generator-refactoring
Fri, 20 Sep 2013 16:34:37 +0200 Sascha L. Teichmann Merged generator-refactoring
Fri, 20 Sep 2013 16:34:09 +0200 Sascha L. Teichmann Extended init() of OutGenerator to take name of the out to serve. generator-refactoring
Fri, 20 Sep 2013 16:33:22 +0200 Andre Heinecke Add LTR inversion code to diagram generator. generator-refactoring
Fri, 20 Sep 2013 16:25:43 +0200 Andre Heinecke More Processor refactoring generator-refactoring
Fri, 20 Sep 2013 15:44:39 +0200 Sascha L. Teichmann Trim "names" and "class" attribute of out generators before using. generator-refactoring
Fri, 20 Sep 2013 15:42:21 +0200 Sascha L. Teichmann Allow comma separated names in "names" attribute in out generators to allow registering for more than one name. Old "name" attribute is removed. generator-refactoring
Fri, 20 Sep 2013 15:29:02 +0200 Sascha L. Teichmann Read out generator class info from "class" attribute instead of tags text body. generator-refactoring
Fri, 20 Sep 2013 14:59:00 +0200 Andre Heinecke Use DiagramGenerator for longitudinal section. generator-refactoring
Fri, 20 Sep 2013 14:57:26 +0200 Andre Heinecke Add NPE guard generator-refactoring
Fri, 20 Sep 2013 14:56:46 +0200 Andre Heinecke Add InfoGenerator Hacks to be removed soon. generator-refactoring
Fri, 20 Sep 2013 14:55:44 +0200 Andre Heinecke Remove Axis Walker, unabstract Diagram generator generator-refactoring
Fri, 20 Sep 2013 14:54:26 +0200 Andre Heinecke Add second doOut implementations to work with diagram generator generator-refactoring
Fri, 20 Sep 2013 14:22:44 +0200 Felix Wolfsteller issue1494: Spawn Q facet only if Q data is there.
Thu, 19 Sep 2013 12:53:11 +0200 Felix Wolfsteller Simplify code a bit.
Thu, 19 Sep 2013 12:52:06 +0200 Felix Wolfsteller Doc, comment.
Fri, 20 Sep 2013 13:11:22 +0200 Tom Gottfried Close branch longitudinal-symmetry. Diagram refactoring is now done in branch generator-refactoring. longitudinal-symmetry
Fri, 20 Sep 2013 12:35:14 +0200 Sascha L. Teichmann Added 'include-zero' attribute to <axis> tag in diagram configuration. generator-refactoring
Fri, 20 Sep 2013 12:28:15 +0200 Sascha L. Teichmann Added domain axis title to diagram attributes. generator-refactoring
Fri, 20 Sep 2013 12:04:14 +0200 Andre Heinecke Some more accessors and typo fix generator-refactoring
Fri, 20 Sep 2013 10:30:03 +0200 Andre Heinecke Remove AxisProcessor "glue" class and extend Processor interface generator-refactoring
Fri, 20 Sep 2013 10:29:14 +0200 Andre Heinecke Fix indention / line length generator-refactoring
Fri, 20 Sep 2013 09:55:17 +0200 Andre Heinecke Add Default Processor implementation and make processors inherit it. generator-refactoring
Thu, 19 Sep 2013 17:08:02 +0200 Tom Gottfried Remove obsolete configuration of DGM-SRID.
Thu, 19 Sep 2013 16:27:33 +0200 Sascha L. Teichmann DGM SRIds are now fetched from database instead of configuration.
Thu, 19 Sep 2013 12:51:30 +0200 Felix Wolfsteller issue1436: Repair sedimentload epoch calculation,
Thu, 19 Sep 2013 10:39:15 +0200 Felix Wolfsteller Corrected debug output.
Thu, 19 Sep 2013 11:50:36 +0200 Sascha L. Teichmann Call processors from configuration. generator-refactoring
Thu, 19 Sep 2013 11:39:00 +0200 Sascha L. Teichmann Parse config when setup a new diagram. generator-refactoring
Thu, 19 Sep 2013 11:29:35 +0200 Andre Heinecke Add annotationProcessor generator-refactoring
Thu, 19 Sep 2013 11:08:43 +0200 Sascha L. Teichmann Added alignment rules for diagrams. generator-refactoring
Thu, 19 Sep 2013 10:57:47 +0200 Sascha L. Teichmann Simple interpolation logic for diagram titles and subtitles. generator-refactoring
Thu, 19 Sep 2013 09:16:52 +0200 Felix Wolfsteller issue1493: Use other numberformat for csv data from diagram.
Wed, 18 Sep 2013 18:40:52 +0200 Felix Wolfsteller issue971: Bring a formatter in (a bad) place.
Wed, 18 Sep 2013 14:15:14 +0200 Felix Wolfsteller issue971: Use ";" as CSV separator also in ChartExportHelper, with the
Wed, 18 Sep 2013 17:13:17 +0200 Andre Heinecke Add DiagramGenerator which should mainly replace xygenerator generator-refactoring
Wed, 18 Sep 2013 17:12:13 +0200 Andre Heinecke Factor out annotation handling code generator-refactoring
Wed, 18 Sep 2013 16:26:12 +0200 Sascha L. Teichmann Fixed typo. generator-refactoring
Wed, 18 Sep 2013 16:21:07 +0200 Andre Heinecke Correct group for jfreechart generator-refactoring
Wed, 18 Sep 2013 16:20:59 +0200 Sascha L. Teichmann Added first version of diagram attribute parser. generator-refactoring
Wed, 18 Sep 2013 16:05:56 +0200 Andre Heinecke Update jfreechart dependency to 1.0.15 generator-refactoring
Wed, 18 Sep 2013 15:44:49 +0200 Andre Heinecke Use combine instead of combineignoringNaN (for compatibility) generator-refactoring
Wed, 18 Sep 2013 15:04:26 +0200 Sascha L. Teichmann Add setup(Element config) method to Generator interface to be initialized from configuration. generator-refactoring
Wed, 18 Sep 2013 12:25:05 +0200 Felix Wolfsteller issue971: Change CSV column separator to ";".
Wed, 18 Sep 2013 12:24:33 +0200 Felix Wolfsteller issue971: Change CSV column separator to ";" for Exports, client-side change follows.
Wed, 18 Sep 2013 10:12:47 +0200 Andre Heinecke Combine AxisDataset implementations and remove / simplify handling code. generator-refactoring
Tue, 17 Sep 2013 16:49:37 +0200 Andre Heinecke Add a copy of the ChartGenerator class. generator-refactoring
Tue, 17 Sep 2013 15:34:28 +0200 Andre Heinecke (issue1023) We do not support html getfeatureinfo
Tue, 17 Sep 2013 11:45:44 +0200 Felix Wolfsteller Doc.
Tue, 17 Sep 2013 09:43:27 +0200 Felix Wolfsteller WDifferencesState: Remove empty constructor.
Tue, 17 Sep 2013 09:31:33 +0200 Felix Wolfsteller issue1470: Make validate of WDifferencesState return true if in "new chart".
Mon, 16 Sep 2013 17:30:14 +0200 Felix Wolfsteller Doc.
Mon, 16 Sep 2013 17:29:16 +0200 Felix Wolfsteller Doc.
Mon, 16 Sep 2013 17:28:34 +0200 Felix Wolfsteller Cosmetics, typo fix in comment.
Mon, 16 Sep 2013 17:26:16 +0200 Felix Wolfsteller Cosmetics.
Mon, 16 Sep 2013 17:11:16 +0200 Andre Heinecke Added tag 3.0.15 for changeset a18a43764793
Mon, 16 Sep 2013 16:18:01 +0200 Felix Wolfsteller issue1235: Do not add 'other' values twice to suspended sed. values, fix range. 3.0.15
Mon, 16 Sep 2013 15:11:02 +0200 Felix Wolfsteller Doc.
Mon, 16 Sep 2013 15:45:51 +0200 Andre Heinecke Fix syntax error on oracle by removing unused paramater
Mon, 16 Sep 2013 15:30:06 +0200 Andre Heinecke (issue1071) Change format for paramter a again
Mon, 16 Sep 2013 12:51:22 +0200 Andre Heinecke (Issue 1353): Add warning when a gauge is skipped because of station
Mon, 16 Sep 2013 09:52:28 +0200 Felix Wolfsteller issue1465: Assume that a "0" measurement for total sediment load is
Mon, 16 Sep 2013 09:17:33 +0200 Felix Wolfsteller issue1157: Fix sorting by start time (descending) for cross-section selection.
Fri, 13 Sep 2013 18:29:01 +0200 Tom Gottfried Schema change: increase precision of gauges.station to be able to hold nearby gauges. double-precision
Fri, 13 Sep 2013 17:42:09 +0200 Sascha L. Teichmann Fixed misuse of x !=/== Double.NaN
Fri, 13 Sep 2013 16:10:10 +0200 Felix Wolfsteller issue1465: Adjust to new use of NaN instead of 0.
Fri, 13 Sep 2013 16:07:46 +0200 Felix Wolfsteller issue1465: Do not allow null ranges for fraction values, logger.error instead.
Fri, 13 Sep 2013 16:03:05 +0200 Felix Wolfsteller issue1465: Initialize sediment load fraction values with NaN instead of 0,
Fri, 13 Sep 2013 16:01:11 +0200 Felix Wolfsteller issue1465: Show space instead of '-' in table results view.
Fri, 13 Sep 2013 15:30:17 +0200 Sascha L. Teichmann Typo fix.
Fri, 13 Sep 2013 15:24:07 +0200 Sascha L. Teichmann Another tweak for flys/issue1353: Be more tolerant about river names.
Fri, 13 Sep 2013 12:28:13 +0200 Tom Gottfried make_release.sh: default DGM_PATH to path on poland.
Fri, 13 Sep 2013 12:30:42 +0200 Felix Wolfsteller issue1465: Prepare SedimentLoadExporter to show "-" for NaN-values.
Fri, 13 Sep 2013 12:02:40 +0200 Sascha L. Teichmann Fix for flys/issue1479: Really iterate over the FLYS river not over empty list.
Thu, 12 Sep 2013 21:12:59 +0200 Tom Gottfried SCHEMA CHANGE: a < b now enforced on ranges. double-precision
Thu, 12 Sep 2013 19:15:07 +0200 Tom Gottfried DGM-importer: enforce a < b for ranges. double-precision
Thu, 12 Sep 2013 18:58:19 +0200 Tom Gottfried Range import: enforce a<b not only for WSTs and set only a for zero-length ranges. double-precision
Thu, 12 Sep 2013 18:43:21 +0200 Tom Gottfried Issue1333: expand single-line i.e. 0-lenght Q-range to minimal length. double-precision
Fri, 30 Aug 2013 17:31:20 +0200 Tom Gottfried Minor schema change: allow to delete ranges with associated DEMs. double-precision
Thu, 12 Sep 2013 18:04:48 +0200 Sascha L. Teichmann Fix for flys/issue1018: Sort the pairs of (q, w) in q before creating a spline also in case of non interpolation.
Thu, 12 Sep 2013 16:35:07 +0200 Sascha L. Teichmann Fix for flys/issue1479: The indices of the dates of the analysis periods where re-mapped wrong.
Thu, 12 Sep 2013 11:50:39 +0200 Felix Wolfsteller issue1472: Remove commented code.
Thu, 12 Sep 2013 11:33:26 +0200 Felix Wolfsteller issue1472: Do not guess flow direction from differences.
Thu, 12 Sep 2013 10:15:18 +0200 Tom Gottfried LocationDistancePanel error messages: do not imply calculation in the direction of kilometrage.
Thu, 12 Sep 2013 10:13:09 +0200 Tom Gottfried merged accidental head (nothing changed)
Thu, 12 Sep 2013 09:46:35 +0200 Felix Wolfsteller issue1378: Adjust style for flood-protection annotation values at y axis.
Wed, 11 Sep 2013 17:04:06 +0200 Bernhard Reiter Closing branch 'dc-km-filter', should already be integrated in default (but not tracked by hg). dc-km-filter
Wed, 11 Sep 2013 16:04:14 +0200 Bernhard Reiter (issue1023) mapserver templates mapfile.vm, wsplgen_layer.vm explicitely adding the three projects, so that mapserver offers the in the capabilities.
Wed, 11 Sep 2013 15:40:51 +0200 Bernhard Reiter Closing inaktive branch "dc-km-filter-rr". dc-km-filter-rr
Wed, 11 Sep 2013 15:37:05 +0200 Bernhard Reiter Closing inactive branch. facets-slt
Wed, 11 Sep 2013 15:30:38 +0200 Sascha L. Teichmann Removed obsolete imports.
Wed, 11 Sep 2013 13:15:30 +0200 Sascha L. Teichmann flys/issue1485 Better titles for UESK layers.
Wed, 11 Sep 2013 11:41:29 +0200 Bernhard Reiter Closing branch 'interaktive-karte', the contents must have been merged (without hg tracking it) to default long ago because it is in there. interaktive-karte
Wed, 11 Sep 2013 11:41:29 +0200 Sascha L. Teichmann GWT client: Do not assumed there is always a SAML ticket when generating Wiki links.
Wed, 11 Sep 2013 09:59:00 +0200 Felix Wolfsteller issue1465: Removed fix for non-matching measurement station and stations range.
Wed, 11 Sep 2013 09:46:11 +0200 Felix Wolfsteller Backed out changeset 6b9402377d07
Tue, 10 Sep 2013 17:48:48 +0200 Sascha L. Teichmann flys/issue1417 Be more fault tolerant if a river has no flood plain.
less more | rev 8006: (0) -1024 +1024 tip
http://dive4elements.wald.intevation.org