Mercurial > dive4elements > river

log

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
less more | rev 6353: (0) -3000 -1000 -384 +384 +1000 +3000 tip
age author description
Mon, 17 Jun 2013 17:16:25 +0200 Tom Gottfried flow velocity model parser: accept braces in names of upper discharge double-precision
Mon, 17 Jun 2013 16:18:40 +0200 Raimund Renkert Insert Double.NaN for missing values in bed height factory.
Mon, 17 Jun 2013 15:37:26 +0200 Raimund Renkert Use Double.NaN for missing values in middle bedheight calculation and write empty strings in csv export.
Mon, 17 Jun 2013 14:30:00 +0200 Raimund Renkert Fixed SQ relation total bedload: Use the correct input data for calculation.
Mon, 17 Jun 2013 13:18:00 +0200 Christian Lins Fix the "Saale-Thüringen" hover effect in the interactive JS map.
Mon, 17 Jun 2013 12:05:49 +0200 Christian Lins Renaming "Thüringen" -> "Thueringen" to fix interactive JS map (#1322).
Fri, 14 Jun 2013 18:25:12 +0200 Sascha L. Teichmann Backend: Store official lines from config if they are any.
Fri, 14 Jun 2013 18:15:49 +0200 Sascha L. Teichmann Backend: Only use name of official config line as name of main value.
Fri, 14 Jun 2013 18:12:22 +0200 Sascha L. Teichmann Backend: Joined official lines with there importer model.
Fri, 14 Jun 2013 17:56:52 +0200 Sascha L. Teichmann Backend: Added importer model for official lines.
Fri, 14 Jun 2013 17:11:33 +0200 Felix Wolfsteller issue1235: Values are valid until next measurements station range start.
Fri, 14 Jun 2013 17:09:25 +0200 Felix Wolfsteller SedimentLoadFacet, issue1235: Ignore values not measured at measurement stations
Fri, 14 Jun 2013 17:08:31 +0200 Felix Wolfsteller Comment.
Fri, 14 Jun 2013 11:56:18 +0200 Felix Wolfsteller In prep for 1235: Renamed variables for improved readability.
Fri, 14 Jun 2013 16:56:30 +0200 Sascha L. Teichmann Backend: Added special ImportWstColumns for official lines. They have to be glued with the main values.
Fri, 14 Jun 2013 16:46:33 +0200 Tom Gottfried merge changes from default into double-precision double-precision
Fri, 14 Jun 2013 16:11:49 +0200 Sascha L. Teichmann Backend: Create ImportWsts for official lines expicitly. They are going to be somewhat special. Removed some cruft from the WstParser.
Fri, 14 Jun 2013 13:25:23 +0200 Sascha L. Teichmann Backend: Added factory to ImportWst to create columns which are derived from ImportWstColumns. This will be handy when creating columns for the official lines.
Fri, 14 Jun 2013 13:01:26 +0200 Sascha L. Teichmann Backend: First steps to integrate parsing of official config files.
Fri, 14 Jun 2013 12:32:28 +0200 Sascha L. Teichmann Backend: Extended list of recognized main value names in STA/official line classification
Fri, 14 Jun 2013 12:30:38 +0200 Sascha L. Teichmann Backend: Removed cruft code
Thu, 13 Jun 2013 17:24:56 +0200 Andre Heinecke Remove createBarriersLayer and createBarriers
Thu, 13 Jun 2013 17:23:51 +0200 Andre Heinecke Use group layer instead of adding two layers to barriers facet
Thu, 13 Jun 2013 17:17:45 +0200 Andre Heinecke Group barriers layer and fix polygon layer path to shapefile
Thu, 13 Jun 2013 17:17:06 +0200 Andre Heinecke Give the polygon barriers class a nice name
Thu, 13 Jun 2013 17:15:34 +0200 Sascha L. Teichmann Backend: Moved guessing of main values and there time intervals out of the STA parser. Same come will be useful to extend the WST parser to better handle official lines.
Thu, 13 Jun 2013 13:12:48 +0200 Sascha L. Teichmann Backend: removed scale factor from min/max value determination of gauge Ws.
Thu, 13 Jun 2013 12:48:12 +0200 Sascha L. Teichmann Artifacts: Moved code from WINFO artifact into state where it belongs.
Thu, 13 Jun 2013 11:43:02 +0200 Andre Heinecke Add special case handling for Fixing AT export at a gauge
Thu, 13 Jun 2013 10:01:01 +0200 Andre Heinecke Add location handling in waterlevels-fix macro
Thu, 13 Jun 2013 09:43:50 +0200 Andre Heinecke Fix dc:fromValue and dc:toValue for locations
Thu, 13 Jun 2013 09:22:46 +0200 Andre Heinecke Add SQ Relation KM formatter and use it fopr issue 1071
Thu, 13 Jun 2013 09:09:56 +0200 Felix Wolfsteller Doc.
Thu, 13 Jun 2013 07:12:35 +0200 Felix Wolfsteller issue1335: Set a single (0) QRange for Waterlevel diffs from csv.
Wed, 12 Jun 2013 12:36:43 +0200 Felix Wolfsteller issue1354: TimeIntervals in Waterlevels from csv files.
Wed, 12 Jun 2013 18:21:48 +0200 Sascha L. Teichmann Artifacts: Comment out broken official lines loading from datacage.
Wed, 12 Jun 2013 18:09:18 +0200 Andre Heinecke Add gauge validity information to dischargecurve exporter
Wed, 12 Jun 2013 18:13:47 +0200 Sascha L. Teichmann GWT client: Removed obsolete imports.
Wed, 12 Jun 2013 18:10:36 +0200 Sascha L. Teichmann Artifacts: Removed obsolete import.
Wed, 12 Jun 2013 18:08:31 +0200 Sascha L. Teichmann Backend: Removed obsolete import.
Wed, 12 Jun 2013 18:01:42 +0200 Sascha L. Teichmann Backend: Add Hibernate model for official lines.
Wed, 12 Jun 2013 17:46:56 +0200 Andre Heinecke Assume that the result is calculated if the wUnit is meter
Wed, 12 Jun 2013 17:46:22 +0200 Andre Heinecke Format km's in computed discharge export
Wed, 12 Jun 2013 17:45:56 +0200 Andre Heinecke Don't print two header at calculated gauges
Wed, 12 Jun 2013 17:45:35 +0200 Andre Heinecke Correctly set the reference system after conversion
Wed, 12 Jun 2013 16:59:46 +0200 Andre Heinecke Use the river unit in csv export if not converted
Wed, 12 Jun 2013 16:57:55 +0200 Andre Heinecke Only show gauge information if available
Wed, 12 Jun 2013 16:20:09 +0200 Andre Heinecke Remove some accidental debug output
Wed, 12 Jun 2013 16:10:56 +0200 Andre Heinecke Update PDF/CSV export for discharge curves
Wed, 12 Jun 2013 16:07:28 +0200 Andre Heinecke Rework ATWriter/Exporter
Wed, 12 Jun 2013 16:02:33 +0200 Andre Heinecke Add another constructor that takes a WQ object as parameter
Wed, 12 Jun 2013 16:01:46 +0200 Andre Heinecke Add conversion function that prepares a WQ table for export at gauge
Wed, 12 Jun 2013 10:54:27 +0200 Andre Heinecke Remove discharge table scaling but add reference system to W
Wed, 12 Jun 2013 16:36:34 +0200 Sascha L. Teichmann Backend: Modified schema for a better model of official lines.
Wed, 12 Jun 2013 14:28:37 +0200 Christian Lins Add missing hover image for "Saar (Wiltinger Bogen)" (#1322).
Wed, 12 Jun 2013 14:25:58 +0200 Tom Gottfried Bedheight single parser: do not reject lines with missing values double-precision
Wed, 12 Jun 2013 12:00:17 +0200 Felix Wolfsteller Weird merge.
Wed, 12 Jun 2013 11:51:25 +0200 Felix Wolfsteller Minor refac.
Wed, 12 Jun 2013 11:43:34 +0200 Felix Wolfsteller Remove code dupe, doc.
Wed, 12 Jun 2013 11:27:36 +0200 Felix Wolfsteller Doc.
Wed, 12 Jun 2013 11:20:36 +0200 Felix Wolfsteller Waterl.Diff.Parser issue1354: Extract years from name, to later set timeintervals.
Wed, 12 Jun 2013 11:18:47 +0200 Felix Wolfsteller Doc.
Wed, 12 Jun 2013 11:52:19 +0200 Felix Wolfsteller WaterlevelDifferencesParser: issue1354/1, set timeintervals from waterdiff-csvs.
Wed, 12 Jun 2013 11:51:25 +0200 Felix Wolfsteller Minor refac.
Wed, 12 Jun 2013 11:43:34 +0200 Felix Wolfsteller Remove code dupe, doc.
Wed, 12 Jun 2013 11:27:36 +0200 Felix Wolfsteller Doc.
Wed, 12 Jun 2013 11:20:36 +0200 Felix Wolfsteller Waterl.Diff.Parser issue1354: Extract years from name, to later set timeintervals.
Wed, 12 Jun 2013 11:18:47 +0200 Felix Wolfsteller Doc.
Wed, 12 Jun 2013 10:43:30 +0200 Sascha L. Teichmann Whitespace correction and cminor ruft code removal.
Wed, 12 Jun 2013 10:34:43 +0200 Andre Heinecke Add date format for artifact creation time
Wed, 12 Jun 2013 10:28:36 +0200 Felix Wolfsteller Switch wst_kinds of Waterleve/-Differences (6/7).
Wed, 12 Jun 2013 10:26:45 +0200 Felix Wolfsteller Switch wst-kind of waterlevel/-differences (7 and 6).
Wed, 12 Jun 2013 09:43:02 +0200 Felix Wolfsteller Cosemetics, doc.
Wed, 12 Jun 2013 09:39:51 +0200 Felix Wolfsteller Doc.
Wed, 12 Jun 2013 10:13:55 +0200 Andre Heinecke Add km range to description of waterlevels for issue565
Tue, 11 Jun 2013 17:19:59 +0200 Andre Heinecke Revert halfhearted logfile move. (r6127)
Tue, 11 Jun 2013 16:41:16 +0200 Andre Heinecke Add non recommendations for bed_difference_height_year
Tue, 11 Jun 2013 15:26:47 +0200 Christian Lins Add missing 'Saale-Thüringen' and 'Saar (Wiltinger Bogen)' hover images links. The latter is not available yet.
Tue, 11 Jun 2013 14:58:13 +0200 Raimund Renkert Order bed heights by station.
Tue, 11 Jun 2013 13:17:18 +0200 Tom Gottfried merged changes from default into double-precision branch double-precision
Tue, 11 Jun 2013 13:03:50 +0200 Tom Gottfried Bed height parser: check for duplicate stations double-precision
Tue, 11 Jun 2013 12:57:51 +0200 Raimund Renkert Replaced the 'old school' wiki link buttons with default links.
Tue, 11 Jun 2013 12:41:33 +0200 Felix Wolfsteller WQAdaptedInputPanel: Ensure correct initial default selection ("Q").
Tue, 11 Jun 2013 12:19:01 +0200 Felix Wolfsteller issue1267: Polishing: Move the sorting into the db/sql-query.
Tue, 11 Jun 2013 12:05:01 +0200 Felix Wolfsteller Doc.
Tue, 11 Jun 2013 12:01:27 +0200 Felix Wolfsteller issue1267: Do not downscale height.
Tue, 11 Jun 2013 12:00:57 +0200 Felix Wolfsteller Added TODO about braindead code.
Tue, 11 Jun 2013 11:59:25 +0200 Felix Wolfsteller issue1267: Sort the list of FastCrossSections before binarySearching it.
Tue, 11 Jun 2013 11:58:54 +0200 Felix Wolfsteller Doc.
Tue, 11 Jun 2013 09:40:56 +0200 Tom Gottfried merge changes from default into double-precision branch double-precision
Tue, 11 Jun 2013 09:21:04 +0200 Raimund Renkert Added styles for bed quality themes to config.
Tue, 11 Jun 2013 09:20:14 +0200 Raimund Renkert Set facet activity, have the correct facet order and added new facet to bed quality.
Tue, 11 Jun 2013 09:18:30 +0200 Raimund Renkert Added new bedload diameter facet to config.
Tue, 11 Jun 2013 09:17:29 +0200 Raimund Renkert New facet for bedload diameter measurements.
Tue, 11 Jun 2013 09:16:41 +0200 Raimund Renkert Removed obsolete member and minor code style.
Tue, 11 Jun 2013 09:14:12 +0200 Raimund Renkert Never return 'null' for bed(load) diameters.
Tue, 11 Jun 2013 09:12:35 +0200 Raimund Renkert Bring bedload average diameter to 'mm'.
Tue, 11 Jun 2013 08:44:38 +0200 Tom Gottfried Corrected typo
Mon, 10 Jun 2013 21:26:22 +0200 Tom Gottfried AT-Parser: Do not change unit of W and Q in discharge tables
Mon, 10 Jun 2013 16:30:41 +0200 Raimund Renkert I18N strings for facet descriptions.
Mon, 10 Jun 2013 16:30:01 +0200 Raimund Renkert New theme for bed diameter measurement facets.
Mon, 10 Jun 2013 16:28:57 +0200 Raimund Renkert Generate facets for bed diameter measurements and draw them into the generated chart.
Mon, 10 Jun 2013 16:23:39 +0200 Raimund Renkert Added new facet types for bed diameter measurements.
Mon, 10 Jun 2013 16:22:23 +0200 Raimund Renkert Added container and facet for bed diameter measurements.
Mon, 10 Jun 2013 16:24:45 +0200 Andre Heinecke Added tag 3.0.7 for changeset 5733d7f27196
Mon, 10 Jun 2013 15:45:12 +0200 Sascha L. Teichmann Removed obsolete import. 3.0.7
Mon, 10 Jun 2013 14:56:13 +0200 Andre Heinecke Enlarge white background so that it overlays correctly as
Mon, 10 Jun 2013 14:17:09 +0200 Christian Lins Refit PDF map legend (#767).
Mon, 10 Jun 2013 14:02:32 +0200 Christian Lins Limit PDF map title length to 20 characters (#767).
Mon, 10 Jun 2013 13:43:53 +0200 Christian Lins Enhance WSPLGEN legend's class names (#767).
Mon, 10 Jun 2013 13:06:30 +0200 Andre Heinecke Add Jasper report templates for bedheight differences
Mon, 10 Jun 2013 13:06:03 +0200 Andre Heinecke Implement pdf export for bedheight differences
Mon, 10 Jun 2013 13:04:48 +0200 Andre Heinecke Add method to get name pairs of differences
Mon, 10 Jun 2013 13:04:17 +0200 Andre Heinecke Add JR datasource for Bedheight differences
Mon, 10 Jun 2013 11:50:21 +0200 Andre Heinecke Change author I'm the culprit of that class.
Mon, 10 Jun 2013 10:57:14 +0200 Andre Heinecke Fix accidental mistake in group expression of some waterlevels
Mon, 10 Jun 2013 10:54:24 +0200 Andre Heinecke Fix uesk description for issue 770
Fri, 07 Jun 2013 18:08:45 +0200 Tom Gottfried Bedheight parser: improved logging
Fri, 07 Jun 2013 17:52:10 +0200 Tom Gottfried Bedheight parser: handle whitespace in metaline
Fri, 07 Jun 2013 17:09:26 +0200 Andre Heinecke Fix export at river km's for issue1275
Fri, 07 Jun 2013 13:06:20 +0200 Andre Heinecke Call update after setting the instance
Fri, 07 Jun 2013 11:49:53 +0200 Andre Heinecke Use WikiLink class for Help links
Fri, 07 Jun 2013 11:49:03 +0200 Andre Heinecke Subclass ImgLink with a new class WikiImgLink
Fri, 07 Jun 2013 11:47:47 +0200 Andre Heinecke Add imageLinkHTML function to WikiLinks class
Thu, 06 Jun 2013 18:23:17 +0200 Andre Heinecke Fix gauge determination.
Thu, 06 Jun 2013 18:10:19 +0200 Raimund Renkert Added i18n string for wst with kind=6 used in datacage.
Thu, 06 Jun 2013 18:09:21 +0200 Raimund Renkert Fixed i18n string to have the correct unit in y axis.
Thu, 06 Jun 2013 18:08:27 +0200 Raimund Renkert Added wsts with kind=6 (delta W ls) to datacage config.
Thu, 06 Jun 2013 17:33:47 +0200 Andre Heinecke Switch default seddb to postgres and handle the configuration
Thu, 06 Jun 2013 17:29:24 +0200 Andre Heinecke Default to a non internal wiki url
Thu, 06 Jun 2013 17:31:34 +0200 Raimund Renkert I965: Set bed heights initial inactive in bed height differences chart.
Wed, 05 Jun 2013 18:53:04 +0200 Andre Heinecke Fix AT export icon and file name after a km change
Thu, 06 Jun 2013 16:56:08 +0200 Christian Lins WMSLayer now use correct OnlineResource for map requests (e.g. Omniscale OSM Service is now working), see Issue #554.
Thu, 06 Jun 2013 16:43:37 +0200 Raimund Renkert I18N strings for bed difference CSV file header.
Thu, 06 Jun 2013 16:43:02 +0200 Raimund Renkert Add CSV data facet to have a CSV file export.
Thu, 06 Jun 2013 16:42:11 +0200 Raimund Renkert Added the new bed difference exporter to config files.
Thu, 06 Jun 2013 16:41:27 +0200 Raimund Renkert Added exporter for bed height differences.
Thu, 06 Jun 2013 13:29:02 +0200 Raimund Renkert Adjusted bed height difference tab title.
Thu, 06 Jun 2013 13:28:05 +0200 Raimund Renkert I999: Epochs and single years are handled in the same way in difference calc.
Thu, 06 Jun 2013 13:26:34 +0200 Raimund Renkert I999: Filter epochs ands single years in datacage config.
Thu, 06 Jun 2013 11:20:20 +0200 Felix Wolfsteller Remove stray debug logging.
Thu, 06 Jun 2013 11:20:01 +0200 Felix Wolfsteller flys/issue863: Create gaps for middlebedheight data if distance > 110 m.
Thu, 06 Jun 2013 10:56:05 +0200 Raimund Renkert Fixed facet display name in bed height difference calculation.
Thu, 06 Jun 2013 10:55:14 +0200 Raimund Renkert I1035: Fixed calculation of multiple bed height differences.
Wed, 05 Jun 2013 18:03:21 +0200 Andre Heinecke Fix empty column logic in FixAT export
Wed, 05 Jun 2013 18:02:39 +0200 Andre Heinecke Add * in the first line of AT Exports.
Wed, 05 Jun 2013 14:44:36 +0200 Andre Heinecke Updade sq relation pdf export as specified in issue1071
Wed, 05 Jun 2013 13:18:25 +0200 Tom Gottfried merge
Wed, 05 Jun 2013 13:16:28 +0200 Tom Gottfried merged
Wed, 05 Jun 2013 12:04:11 +0200 Tom Gottfried merged
Wed, 05 Jun 2013 11:56:38 +0200 Tom Gottfried backout backout as it is now safely in a branch double-precision
Wed, 05 Jun 2013 09:36:01 +0200 Tom Gottfried Do not use file extension for description of bed heights
Fri, 24 May 2013 16:26:41 +0200 Tom Gottfried Backed out changeset 53fca3392c9f
Fri, 24 May 2013 16:03:52 +0200 Tom Gottfried Schema change and Importer: use double to prevent rounding at import time
Wed, 05 Jun 2013 13:13:20 +0200 Christian Lins CapabilitiesParse parses the "queryable" attribute of a WMSLayer now (#1253).
Wed, 05 Jun 2013 12:56:24 +0200 Christian Lins CapabilitesParser can parse map format types now (#554).
Wed, 05 Jun 2013 11:54:24 +0200 Christian Lins Fix Non-UTF8 Umlaut characters.
Wed, 05 Jun 2013 11:40:14 +0200 Felix Wolfsteller issue697: Re-add style for vertical Q main values text. Had been removed.
Tue, 04 Jun 2013 11:51:06 +0200 Felix Wolfsteller Cosmetics, TODO, doc.
Tue, 04 Jun 2013 17:57:30 +0200 Bernhard Herzog Use WikiLinks cell formatter for the wiki-links in MeasurementStationListGrid.
Tue, 04 Jun 2013 17:41:02 +0200 Bernhard Herzog Generate SSO wiki links in RiverInfoPanel instead of plain Anchors.
Tue, 04 Jun 2013 17:40:00 +0200 Bernhard Herzog Instantiate RiverInfoPanel with a FLYS reference for SSO.
Tue, 04 Jun 2013 17:38:35 +0200 Bernhard Herzog Pass the FLYS instance to the InfoPanel class.
Tue, 04 Jun 2013 17:35:21 +0200 Bernhard Herzog Use WikiLinks cell formatter for the wiki-links in GaugeListGrid.
Tue, 04 Jun 2013 17:33:55 +0200 Bernhard Herzog Add helpers for links into the Flys wiki with optional SSO support.
Tue, 04 Jun 2013 17:20:50 +0200 Bernhard Herzog Extend the shared interface User with the SAML ticket
Tue, 04 Jun 2013 17:13:50 +0200 Bernhard Herzog Store the SAML ticket in the user object after authentication.
Tue, 04 Jun 2013 16:58:49 +0200 Andre Heinecke Add an Override to the compare method
Tue, 04 Jun 2013 16:45:23 +0200 Andre Heinecke Add sorting for discharge value
Tue, 04 Jun 2013 16:07:33 +0200 Andre Heinecke Remove getUser Hack.
Tue, 04 Jun 2013 16:04:08 +0200 Andre Heinecke Simplify and fix range filtering for server data.
Tue, 04 Jun 2013 16:02:17 +0200 Andre Heinecke Accept null mode in to/fromValue
Tue, 04 Jun 2013 16:01:43 +0200 Andre Heinecke Let get return a value
Tue, 04 Jun 2013 15:17:19 +0200 Sascha L. Teichmann Datacage: Added function dc:get('var-name'). Returns content of variable var-name or NULL if not
Tue, 04 Jun 2013 13:28:31 +0200 Christian Lins i18n: German Üsg -> ÜSG
Tue, 04 Jun 2013 12:26:27 +0200 Sascha L. Teichmann Datacage: If there is an artifact you likely need the artifact database, too.
Tue, 04 Jun 2013 10:27:54 +0200 Felix Wolfsteller Remove stray semicolon from sql schema.
Mon, 03 Jun 2013 18:17:45 +0200 Andre Heinecke Fix km filtering in Datacage, we default to mode distance now
Mon, 03 Jun 2013 17:46:59 +0200 Andre Heinecke Add unit to location and translate outliertest method
Mon, 03 Jun 2013 17:32:10 +0200 Andre Heinecke Add missing localisation for pdf export tooltip in fixing analysis
Mon, 03 Jun 2013 17:16:47 +0200 Andre Heinecke Add SQRelationJRDataSource class
Mon, 03 Jun 2013 17:15:09 +0200 Andre Heinecke Implement PDF export for SQ Relation
Mon, 03 Jun 2013 16:26:10 +0200 Andre Heinecke Add Jasper report templates for sqrelation
Mon, 03 Jun 2013 14:56:10 +0200 Christian Lins createWSPLGENClassName() now respects user locale (#767).
Mon, 03 Jun 2013 14:53:08 +0200 Felix Wolfsteller issue986: i18n, include wst-unit in axis label.
Mon, 03 Jun 2013 14:52:31 +0200 Felix Wolfsteller part of issue986: axis label includes correct wst-unit.
Mon, 03 Jun 2013 14:51:57 +0200 Felix Wolfsteller cosmetics: minor indentation fix.
Mon, 03 Jun 2013 13:47:04 +0200 Felix Wolfsteller issue1225: use river name for axis i18n.
Mon, 03 Jun 2013 13:46:20 +0200 Felix Wolfsteller i18n for issue1225: river-km/$river-km .
Mon, 03 Jun 2013 11:30:18 +0200 Andre Heinecke Fix location of features.xml
Mon, 03 Jun 2013 11:25:56 +0200 Andre Heinecke Handle FEATURES_XML environment setting
Mon, 03 Jun 2013 10:23:20 +0200 Andre Heinecke Add l10n for issue1310
Mon, 03 Jun 2013 10:22:25 +0200 Andre Heinecke Use HLayout instead of VLayout.
Mon, 03 Jun 2013 10:21:58 +0200 Christian Lins Stamp border thinkness of map print PDF fitted (#767).
Mon, 03 Jun 2013 10:20:12 +0200 Andre Heinecke Prophylactic fix for DeltaWt's before 1900
Mon, 03 Jun 2013 10:01:28 +0200 Christian Lins Make legend entries of WSPLGEN map more verbose and add units (#767).
Mon, 03 Jun 2013 09:58:16 +0200 Christian Lins Increase legend scale of map print PDF (#767).
Fri, 31 May 2013 16:42:02 +0200 Andre Heinecke Fix comment for newRegularTimePeriod
Sun, 02 Jun 2013 21:57:11 +0200 Christian Lins Increase legend size of map print PDF (#767).
Sun, 02 Jun 2013 21:09:12 +0200 Christian Lins Increase map title size for map print PDF (#767).
Sun, 02 Jun 2013 18:13:29 +0200 Sascha L. Teichmann LinearInterpolated#apply(): Added simple test if the two datasets intersect at all.
Sun, 02 Jun 2013 17:52:53 +0200 Sascha L. Teichmann Waterlevel differences & bed height differences: Add new model LinearInterpolated intented to unify the two very similiar calculations. The focus of the current implementation is correctness and not speed! The fact that the data sets more mostly sorted by station is not exploited. Doing so would improve performance significantly.
Sun, 02 Jun 2013 13:51:27 +0200 Sascha L. Teichmann Bed quality calculation: Replaced another iteration over the key set + directly fetching the values withan iteration over the entry set.
Sun, 02 Jun 2013 13:45:12 +0200 Sascha L. Teichmann Bed quality calculation: Fixed a calculation typo: s/sum =+ d/sum += d/
Sun, 02 Jun 2013 02:43:00 +0200 Sascha L. Teichmann Bed height: Removed braindead index determination code.
Sat, 01 Jun 2013 20:08:21 +0200 Sascha L. Teichmann Bed height differences: DO NOT STORE ARTIFACTS IN CALCULATION RESULTS!!! This would lead to caching them which is _really_ wrong.
Sat, 01 Jun 2013 18:59:52 +0200 Sascha L. Teichmann Bed height differences: Some refactoring of the calculation to improve readability and performance.
Sat, 01 Jun 2013 09:10:15 +0200 Sascha L. Teichmann Removed unnecessary call of map.containsKey(x).
Sat, 01 Jun 2013 09:02:51 +0200 Sascha L. Teichmann Removed obsolete import.
Sat, 01 Jun 2013 09:00:29 +0200 Sascha L. Teichmann Removed obsolete imports.
Fri, 31 May 2013 17:24:22 +0200 Tom Gottfried Schema change: remove UNIQUE-constraint which allows importing cross sections only from PRF
Fri, 31 May 2013 16:38:57 +0200 Andre Heinecke Use FixMilliseconds instead of dates for time periods
Fri, 31 May 2013 15:43:14 +0200 Andre Heinecke Guard the collection describe debug output
Fri, 31 May 2013 15:29:30 +0200 Andre Heinecke Add handling of bound artifacts.
Fri, 31 May 2013 15:27:06 +0200 Andre Heinecke Add boundToOut handling to ManagedFacets.
Fri, 31 May 2013 15:24:53 +0200 Andre Heinecke Add debug output in static d4e artifact ctor
Fri, 31 May 2013 15:22:04 +0200 Andre Heinecke Remove duplicate longitudinal section facet for bedheight_differences
Fri, 31 May 2013 15:20:55 +0200 Andre Heinecke Handle target_out in the Recommendation / Client datacage code.
Fri, 31 May 2013 15:19:32 +0200 Andre Heinecke Print the complete collection in parseCollection
Thu, 30 May 2013 15:15:02 +0200 Raimund Renkert Handle special highlighting for fix analysis.
Thu, 30 May 2013 15:08:29 +0200 Raimund Renkert Added JavaScript callback to get the selected module in native JavaScript code.
Thu, 30 May 2013 15:07:29 +0200 Raimund Renkert Start up a new project on load.
Thu, 30 May 2013 15:06:10 +0200 Raimund Renkert Removed next button in initial project view.
Thu, 30 May 2013 15:05:29 +0200 Raimund Renkert Use new icon in rver link list.
Thu, 30 May 2013 15:04:36 +0200 Raimund Renkert Added icon for selected river in link list.
Thu, 30 May 2013 15:03:48 +0200 Raimund Renkert Updated transparent overlay for image map.
Thu, 30 May 2013 10:52:52 +0200 Christian Lins Set mapserver logfile name to d4e-wms.log, which logs to server root instead of /tmp.
Thu, 30 May 2013 06:04:00 +0200 Sascha L. Teichmann Datacage: Added function dc:replace-all(haystack, needle, replacement) to do regular expression replacements. Mapped to Java's String haystack.replaceAll(needle, replacement).
Wed, 29 May 2013 10:36:40 +0200 Christian Lins Add "Ringdeich" class to barrier lines mapfile template (#802).
Wed, 29 May 2013 09:22:11 +0200 Andre Heinecke Add target_out attribute to elements with a factory
Tue, 28 May 2013 17:54:17 +0200 Felix Wolfsteller flys1225/4: Absolute height axis label with wstunits.
Tue, 28 May 2013 17:53:27 +0200 Felix Wolfsteller prep i18n issue1225/4 .
Tue, 28 May 2013 16:01:38 +0200 Andre Heinecke Added tag 3.0.6 for changeset b689d2b9d167
Tue, 28 May 2013 16:00:16 +0200 Andre Heinecke Fix saml parameter name to fix SSO 3.0.6
Tue, 28 May 2013 15:57:10 +0200 Raimund Renkert We have a much faster interactive image map!
Tue, 28 May 2013 13:49:51 +0200 Christian Lins Fixes bug that caused the garbled upload of user shapefiles (#657).
Tue, 28 May 2013 13:04:13 +0200 Christian Lins Add some debug output to FileUploadServiceImpl.
Mon, 27 May 2013 17:59:00 +0200 Felix Wolfsteller issue1225/1: Include river name in x axis label.
Mon, 27 May 2013 17:57:18 +0200 Felix Wolfsteller issue1225/1: i18n prep.
Tue, 28 May 2013 11:14:25 +0200 Raimund Renkert Order flow velocity values by station.
Mon, 27 May 2013 17:10:49 +0200 Sascha L. Teichmann Themes: s/hints="h"/hints="hidden"/
Mon, 27 May 2013 15:43:34 +0200 Raimund Renkert Merged theme config files default.xml and second.xml.
Mon, 27 May 2013 15:40:42 +0200 Andre Heinecke Commit changes described in r6110
Mon, 27 May 2013 15:36:56 +0200 Andre Heinecke Fix datacage for user data by adding facet filtering.
Mon, 27 May 2013 15:27:31 +0200 Sascha L. Teichmann Fixed missspelled mapping
Mon, 27 May 2013 15:17:37 +0200 Felix Wolfsteller candidate for issue1335: replace weird test with lest weird test.
Mon, 27 May 2013 15:03:00 +0200 Andre Heinecke Revert 6081 now that determineGauge handles bordering river sections
Mon, 27 May 2013 15:00:34 +0200 Andre Heinecke determineGauge tries now to find the correct Gauge by handling overlapping borders
Mon, 27 May 2013 13:35:08 +0200 Christian Lins Explicitly set Content-Type of shapefile upload response message to text/html. See flys/#657.
Sat, 25 May 2013 21:00:52 +0200 Sascha L. Teichmann Themes: Name second theme 'second'
Sat, 25 May 2013 20:55:11 +0200 Sascha L. Teichmann Themes: Reunited the small parts of default and second theme to default.xml and second.xml again to have valid XML.
Sat, 25 May 2013 19:40:09 +0200 Sascha L. Teichmann Removed obsolete imports and dead code.
Sat, 25 May 2013 19:32:58 +0200 Sascha L. Teichmann Removed unused context from RangeAccess and subclasses leading to some dead code removal.
Sat, 25 May 2013 16:58:27 +0200 Sascha L. Teichmann GWT client: Removed some Iterator cruft.
Sat, 25 May 2013 16:18:28 +0200 Sascha L. Teichmann Datacage: Another variable access fix.
Sat, 25 May 2013 16:11:49 +0200 Sascha L. Teichmann Datacage: Fixed wrong variable access in meta-data.xml
Sat, 25 May 2013 08:14:56 +0200 Sascha L. Teichmann Datacage: Macros are indexed, so there is no need to linear scan all template nodes to find them.
Fri, 24 May 2013 18:53:35 +0200 Andre Heinecke Merge double fix for Virtual Columns
Fri, 24 May 2013 18:53:05 +0200 Andre Heinecke First part of the filtering datacage for user data.
Fri, 24 May 2013 17:10:19 +0200 Andre Heinecke Fix virtual columns, name has to be set and name has to be uppercase
Fri, 24 May 2013 18:16:36 +0200 Sascha L. Teichmann Datacage: Fixed fix for <dc:virtual-column>
Fri, 24 May 2013 18:13:23 +0200 Sascha L. Teichmann Datacage: Fixed addColumn in <dc:virtual-column>
Fri, 24 May 2013 13:57:40 +0200 Felix Wolfsteller issue1061: Adjusted facet names of bed diff.
Fri, 24 May 2013 13:56:45 +0200 Felix Wolfsteller part of issue1061: Add i18n.
Fri, 24 May 2013 11:39:35 +0200 Felix Wolfsteller towards issue1061: Store names of original BedHeights in the BedDiffYearResult.
Fri, 24 May 2013 12:22:05 +0200 Sascha L. Teichmann merged
Fri, 24 May 2013 12:19:25 +0200 Sascha L. Teichmann Datacage: Introduced <dc:virtual-column name="colname" type="type" expr="XPath">
Fri, 24 May 2013 12:17:23 +0200 Andre Heinecke Also set encoding for river mapfile to UTF-8
Fri, 24 May 2013 11:57:07 +0200 Andre Heinecke Set WMS encoding correctly to UTF-8
Fri, 24 May 2013 10:06:58 +0200 Andre Heinecke We want to expand the group key for the name
Fri, 24 May 2013 09:23:35 +0200 Andre Heinecke Return an empty string for the NULL object.
Fri, 24 May 2013 09:22:39 +0200 Andre Heinecke Add some debugging tips
Fri, 24 May 2013 09:22:10 +0200 Andre Heinecke Fix old calculations datacage parts.
Thu, 23 May 2013 18:14:31 +0200 Sascha L. Teichmann Datacage: Introduced dc:dump-variables() and modified dc:message to use XPath expansion.
Thu, 23 May 2013 17:32:45 +0200 Tom Gottfried merged
Thu, 23 May 2013 17:32:20 +0200 Tom Gottfried Schema change: view for WSTs which deales with multiple ranges matching station (issues 1315 and 1296)
Thu, 23 May 2013 17:31:26 +0200 Sascha L. Teichmann Datacage: Introduced <dc:message>This is my message!</dc:message>. The message are logged at INFO level to help debugging.
Thu, 23 May 2013 15:11:05 +0200 Felix Wolfsteller issue822: Added discharge curve to (new) charts compat matrix.
Thu, 23 May 2013 14:54:50 +0200 Felix Wolfsteller issue954/2: Flood- Protections in Cross-Sections Datacage.
Thu, 23 May 2013 14:07:05 +0200 Felix Wolfsteller issue1130: Show 'W am Pegel(cm)' values in waterlevelexport.
Thu, 23 May 2013 11:59:01 +0200 Felix Wolfsteller meta-data.xml: dc:has-result()-guard additionals and basedata.
Thu, 23 May 2013 11:23:54 +0200 Felix Wolfsteller meta-data.xml: Wrap user-content in user-range to use 'range intelligence'.
Thu, 23 May 2013 11:22:34 +0200 Felix Wolfsteller meta-data.xml: Fix test syntax.
Thu, 23 May 2013 11:21:58 +0200 Felix Wolfsteller meta-data.xml: Fix query, select on user-id not collection-id.
Thu, 23 May 2013 11:18:51 +0200 Felix Wolfsteller meta-data.xml: Make a select a bit more human-resolvable.
Thu, 23 May 2013 06:07:09 +0200 Sascha L. Teichmann Removed cruft iterator code.
Thu, 23 May 2013 05:54:57 +0200 Sascha L. Teichmann Removed trailing whitspace.
Thu, 23 May 2013 05:49:13 +0200 Sascha L. Teichmann Removed obsolete import
Thu, 23 May 2013 05:46:06 +0200 Sascha L. Teichmann Removed obsolete import
Thu, 23 May 2013 05:42:07 +0200 Sascha L. Teichmann Fixed i18n key
Wed, 22 May 2013 18:34:00 +0200 Andre Heinecke Added tag 3.0.5 for changeset 1a169e10c0f3
Wed, 22 May 2013 18:32:51 +0200 Andre Heinecke Add WQFixing sanity check. 3.0.5
Wed, 22 May 2013 18:10:48 +0200 Andre Heinecke Use maxOverlap to get the correct gauge for the MainValues
Wed, 22 May 2013 17:08:06 +0200 Andre Heinecke Fix WQ input validation for fixing analysis
Wed, 22 May 2013 13:03:10 +0200 Andre Heinecke Get location limits from fixation overview in fixation location selection
Wed, 22 May 2013 12:51:16 +0200 Felix Wolfsteller in relation to flys1313: fix typo that prevented setting crossSection to c.s.l.
Fri, 17 May 2013 09:14:28 +0200 Felix Wolfsteller Indentation.
Fri, 17 May 2013 09:13:47 +0200 Felix Wolfsteller Mainvalues in comp. discharge curve compat list.
Wed, 22 May 2013 10:11:00 +0200 Sascha L. Teichmann GWT client: Make error message more readable.
Tue, 21 May 2013 18:36:32 +0200 Andre Heinecke Readd accidentally removed macros
Tue, 21 May 2013 18:00:29 +0200 Andre Heinecke Commit meta-data.xml refactoring
Tue, 21 May 2013 16:39:10 +0200 Andre Heinecke Expand the Help Url also in the describe method
Tue, 21 May 2013 10:12:25 +0200 Andre Heinecke Add instanceof guard around boundary handling
Tue, 21 May 2013 16:30:14 +0200 Sascha L. Teichmann DC: fixed dc:group
Fri, 17 May 2013 18:21:53 +0200 Andre Heinecke Add an extra class for values >= the largest class
Fri, 17 May 2013 17:56:20 +0200 Andre Heinecke Fix waterlevel classes and change defaults for them.
Thu, 16 May 2013 20:11:53 +0200 Tom Gottfried BHP: do not import lines without useful data
Thu, 16 May 2013 18:04:35 +0200 Tom Gottfried merged
Thu, 16 May 2013 18:03:39 +0200 Tom Gottfried Schema change: there is only one bed height per station at a given point in time
Thu, 16 May 2013 17:58:16 +0200 Felix Wolfsteller Implement function to spawn a mainvalueartifact, given gauge and river.
Thu, 16 May 2013 17:57:55 +0200 Felix Wolfsteller Doc.
Thu, 16 May 2013 17:55:29 +0200 Felix Wolfsteller Doc.
Thu, 16 May 2013 17:54:32 +0200 Felix Wolfsteller Doc.
Thu, 16 May 2013 16:31:09 +0200 Felix Wolfsteller Add a new function to create a GaugeDischarge+MainValueArtifact collection.
Thu, 16 May 2013 16:30:36 +0200 Felix Wolfsteller Doc.
Thu, 16 May 2013 16:25:06 +0200 Felix Wolfsteller MainValuesArtifact: prepare to be created by crafted document.
Thu, 16 May 2013 16:20:18 +0200 Felix Wolfsteller Doc.
Thu, 16 May 2013 16:19:47 +0200 Felix Wolfsteller In relation to issue1081: let there be mainvalues in discharge_curve dc.
Thu, 16 May 2013 16:18:46 +0200 Felix Wolfsteller Add mainvalues to gaugedischargecurve compat list.
Thu, 16 May 2013 08:58:59 +0200 Felix Wolfsteller Part of issue1081: Show mainvalues in discharge_curve dc.
Wed, 15 May 2013 16:20:10 +0200 Felix Wolfsteller Doc and TODO issue1081
Wed, 15 May 2013 16:19:55 +0200 Felix Wolfsteller Doc.
Thu, 16 May 2013 17:48:20 +0200 Andre Heinecke Do not use from and to as variables in statement.
Thu, 16 May 2013 16:14:28 +0200 Tom Gottfried Schema change: Add missing constraints to cross sections in Oracle, cosmetics
Thu, 16 May 2013 12:34:23 +0200 Tom Gottfried WstParser: set column names from specified line also if unspecified line does not exist
Thu, 16 May 2013 12:31:53 +0200 Tom Gottfried WstParser: warn if timestamp can not be set, cosmetics.
Wed, 15 May 2013 16:23:20 +0200 Tom Gottfried Sediment yield parser: be more flexible when looking for grain fraction in filename
Wed, 15 May 2013 12:40:13 +0200 Felix Wolfsteller Part of issue1149: Load main values for w/q diagram.
Tue, 14 May 2013 18:01:16 +0200 Felix Wolfsteller issue977/2: supply mainvalues via dc for reference curve.
Tue, 14 May 2013 19:44:47 +0200 Tom Gottfried forgot one in 6023:4ececb3a4e66
Tue, 14 May 2013 19:12:50 +0200 Tom Gottfried consistent string for AT Export tooltip
Tue, 14 May 2013 18:56:32 +0200 Andre Heinecke Added tag 3.0.4 for changeset 5f34e4cb8095
Tue, 14 May 2013 18:55:55 +0200 Andre Heinecke Use the out attribute everywhere where there is a factory 3.0.4
Tue, 14 May 2013 18:43:08 +0200 Andre Heinecke Flys is still flys for the print url
Tue, 14 May 2013 18:41:43 +0200 Andre Heinecke Commit performance improvement written by Sascha Teichmann
Tue, 14 May 2013 18:36:04 +0200 Andre Heinecke Switch W Q labels in historcial discharges
Tue, 14 May 2013 10:11:29 +0200 Felix Wolfsteller issue1261: when tab is created, jump navi to 'default'-km. This overcomes
Tue, 14 May 2013 07:53:51 +0200 Felix Wolfsteller issue1320: Handle exception.
Mon, 13 May 2013 18:33:01 +0200 Felix Wolfsteller PRFParser: Re-enable line skipping. Act so on station change.
Mon, 13 May 2013 17:58:17 +0200 Felix Wolfsteller issue1259: i18n msg when named main value not found at all gauges.
Mon, 13 May 2013 17:57:18 +0200 Felix Wolfsteller i18n for issue1259.
Mon, 13 May 2013 18:22:58 +0200 Tom Gottfried merged
Mon, 13 May 2013 18:21:55 +0200 Tom Gottfried backout 6009:6ea171b6d8d2 because this was only really valid for fixations
Mon, 13 May 2013 18:16:40 +0200 Sascha L. Teichmann Fixed wrong quote.
Mon, 13 May 2013 17:48:32 +0200 Tom Gottfried Schema change because WST-columns without time interval are useless
Mon, 13 May 2013 15:53:36 +0200 Tom Gottfried Strip non-word characters from measurement station URL
Mon, 13 May 2013 13:21:05 +0200 Tom Gottfried use name and type instead of ID for measurement station link
Mon, 13 May 2013 11:37:14 +0200 Felix Wolfsteller WQAdaptedInputPanel: Start with w tabs disabled.
Mon, 13 May 2013 11:15:14 +0200 Tom Gottfried merged
Mon, 13 May 2013 11:14:38 +0200 Tom Gottfried Importer: use gauge official number as identifier, not name
Mon, 13 May 2013 11:20:08 +0200 Felix Wolfsteller issue949: meta-data.xml: for additional ls, use staticwqkms factory to have w
Mon, 13 May 2013 11:19:14 +0200 Felix Wolfsteller WQKmsFactory: Prevent NPE this time.
Mon, 13 May 2013 11:16:28 +0200 Felix Wolfsteller WQKmsFactory: prevent NPE.
Mon, 13 May 2013 11:14:13 +0200 Felix Wolfsteller issue949: staticwqkms/W facets are active.
Mon, 13 May 2013 10:10:09 +0200 Raimund Renkert Updated and added missing images for interactive image map.
Mon, 13 May 2013 10:14:23 +0200 Felix Wolfsteller issue949: allow longitudinal_section.q facets in 'new charts'.
Fri, 10 May 2013 16:23:06 +0200 Felix Wolfsteller ssue862: MiddleBedHeight facet names.
Fri, 10 May 2013 16:12:55 +0200 Felix Wolfsteller Doc.
Mon, 13 May 2013 10:05:22 +0200 Sascha L. Teichmann River ETL: Limit the discharge tables to load to the historical (kind = 1) ones. This prevents the wrong tables (values) to be deleted.
Sun, 12 May 2013 18:13:50 +0200 Sascha L. Teichmann Removed trailing whitespace.
Sun, 12 May 2013 18:10:57 +0200 Sascha L. Teichmann Removed trailing whitespace.
Sun, 12 May 2013 18:08:41 +0200 Sascha L. Teichmann Removed trailing whitespace.
Sun, 12 May 2013 18:07:03 +0200 Sascha L. Teichmann Removed trailing whitespace.
Sun, 12 May 2013 18:04:40 +0200 Sascha L. Teichmann Removed obsolete import.
Sun, 12 May 2013 18:03:30 +0200 Sascha L. Teichmann River ETL: removed wrong info output that discharge tables only found in FLYS are ignored.
Sun, 12 May 2013 17:04:19 +0200 Sascha L. Teichmann Datacage: Removed macros which are not called.
Sun, 12 May 2013 16:15:37 +0200 Sascha L. Teichmann Datacage: Added stylesheet to detect macros which are defined and not called and vice versa.
Fri, 10 May 2013 19:30:26 +0200 Sascha L. Teichmann Removed obsolete imports.
Fri, 10 May 2013 19:29:10 +0200 Sascha L. Teichmann Be more tolerant when try to find out if a location is at a gauge position.
Fri, 10 May 2013 19:07:00 +0200 Sascha L. Teichmann Fixed encoding in i18n
Fri, 10 May 2013 19:03:48 +0200 Bernhard Herzog Use name id as username in saml.User.
Fri, 10 May 2013 17:44:59 +0200 Andre Heinecke Added tag 3.0.3 for changeset b740f0c4179e
Fri, 10 May 2013 17:14:10 +0200 Raimund Renkert Use 'W [cm]' as CSV header if discharge table is at a gauge. 3.0.3
Fri, 10 May 2013 16:24:38 +0200 Raimund Renkert Revert changes in metadata.xml from r5978:ebd6e8e234e0.
Fri, 10 May 2013 15:45:40 +0200 Raimund Renkert Avoid duplicted mainvalues.
Fri, 10 May 2013 15:44:48 +0200 Raimund Renkert Added mainvalues to fixanalysis wq curves.
Fri, 10 May 2013 15:44:01 +0200 Raimund Renkert Renamed label for outlier test in fix analysis.
Fri, 10 May 2013 15:23:14 +0200 Andre Heinecke Add OUT parameter to each ids parameter
Fri, 10 May 2013 15:16:36 +0200 Andre Heinecke Add handling for OUT id's parameter to D4EArtifact
Fri, 10 May 2013 11:31:51 +0200 Andre Heinecke Add dc:iterate function
Fri, 10 May 2013 13:26:34 +0200 Raimund Renkert Increased column number in cell formater.
Fri, 10 May 2013 13:23:03 +0200 Raimund Renkert Fixed typo.
Fri, 10 May 2013 13:22:36 +0200 Raimund Renkert Added 'bfgid' column to helper panel in hist discharge curve.
Fri, 10 May 2013 12:26:44 +0200 Sascha L. Teichmann Removed obsolete import.
less more | rev 6353: (0) -3000 -1000 -384 +384 +1000 +3000 tip
http://dive4elements.wald.intevation.org