| Sun, 26 Jun 2011 10:33:38 +0000 |
Sascha L. Teichmann |
Fix for flys/issue86
|
| Sat, 25 Jun 2011 17:35:50 +0000 |
Sascha L. Teichmann |
Fixed "W am Pegel" calculations.
|
| Fri, 24 Jun 2011 12:05:13 +0000 |
Ingo Weinzierl |
#174 Longitudinal section charts will now have an upper margin again.
|
| Fri, 24 Jun 2011 09:49:27 +0000 |
Ingo Weinzierl |
#172 Charts of type duration curve will now have a lower X set to '0'.
|
| Thu, 23 Jun 2011 21:44:24 +0000 |
Sascha L. Teichmann |
ATWriter: Results are now in cm. Made it more robust against corner cases.
|
| Thu, 23 Jun 2011 17:22:17 +0000 |
Sascha L. Teichmann |
Added generation and configuration of AT facets.
|
| Thu, 23 Jun 2011 16:45:48 +0000 |
Sascha L. Teichmann |
Added exporter for AT facets.
|
| Thu, 23 Jun 2011 15:50:44 +0000 |
Sascha L. Teichmann |
New AT writer for results.
|
| Thu, 23 Jun 2011 13:42:47 +0000 |
Ingo Weinzierl |
#157 Both types of discharge curves will now include the '0' value on the x-axis.
|
| Thu, 23 Jun 2011 12:39:59 +0000 |
Sascha L. Teichmann |
WQDay is based on WQ now to make it exportable as AT.
|
| Thu, 23 Jun 2011 12:19:12 +0000 |
Sascha L. Teichmann |
Added base class WQ for WQKms.
|
| Thu, 23 Jun 2011 08:58:30 +0000 |
Sascha L. Teichmann |
Corrected configuration for error reports.
|
| Wed, 22 Jun 2011 14:47:22 +0000 |
Ingo Weinzierl |
#164 Create the items for the adapted WQ state with range information for W and Q.
|
| Wed, 22 Jun 2011 10:54:30 +0000 |
Sascha L. Teichmann |
"Abflusskurve am Pegel" looks correct again.
|
| Wed, 22 Jun 2011 10:36:27 +0000 |
Sascha L. Teichmann |
Improved situtation on rendering "Abflusskurve am Pegel". Not fully working, yet.
|
| Wed, 22 Jun 2011 09:19:16 +0000 |
Sascha L. Teichmann |
Generate facets for "Abflusskurven am Pegel". Not working by now. :-/
|
| Wed, 22 Jun 2011 06:51:36 +0000 |
Ingo Weinzierl |
#161 Include the 0 on the second y axis (the Q axis) in longitudinal section charts intially.
|
| Tue, 21 Jun 2011 21:41:49 +0000 |
Sascha L. Teichmann |
Draw correction curve again.
|
| Tue, 21 Jun 2011 18:10:49 +0000 |
Ingo Weinzierl |
#157 Computed discharge curve charts always have a lower bound set to 0.
|
| Tue, 21 Jun 2011 17:39:29 +0000 |
Ingo Weinzierl |
#90 Added a margin between chart data and chart axes to avoid displaying curves on the chart border.
|
| Tue, 21 Jun 2011 17:03:46 +0000 |
Sascha L. Teichmann |
Fix for flys/issue158
|
| Tue, 21 Jun 2011 16:31:19 +0000 |
Sascha L. Teichmann |
Fix for flys/issue154
|
| Tue, 21 Jun 2011 16:22:28 +0000 |
Sascha L. Teichmann |
Only generate 'outs' if they have facets.
|
| Tue, 21 Jun 2011 14:33:00 +0000 |
Ingo Weinzierl |
Put the time-to-live of the collection into its DESCRIBE document.
|
| Mon, 20 Jun 2011 14:36:42 +0000 |
Sascha L. Teichmann |
Configured states to generate report facets.
|
| Mon, 20 Jun 2011 14:14:20 +0000 |
Sascha L. Teichmann |
Generate report facets if there are problems with the calculations.
|
| Mon, 20 Jun 2011 13:47:59 +0000 |
Sascha L. Teichmann |
Added generator and facet for error reports.
|
| Mon, 20 Jun 2011 12:32:32 +0000 |
Sascha L. Teichmann |
New model to transport data and error reports of calculations.
|
| Sat, 18 Jun 2011 20:20:34 +0000 |
Sascha L. Teichmann |
Added calculation "am Pegel" version to the "Wasserspiegellage" calculation.
|
| Sat, 18 Jun 2011 18:38:04 +0000 |
Sascha L. Teichmann |
Removed more dead code.
|
| Sat, 18 Jun 2011 18:19:34 +0000 |
Sascha L. Teichmann |
Removed dead code.
|
| Sat, 18 Jun 2011 17:03:17 +0000 |
Sascha L. Teichmann |
Only generate facets when needed.
|
| Fri, 17 Jun 2011 16:17:03 +0000 |
Sascha L. Teichmann |
Merged revisions 2127-2133,2136-2137,2140,2143-2144,2146,2150-2151,2153-2154 via svnmerge from
|
| Fri, 17 Jun 2011 14:37:09 +0000 |
Sascha L. Teichmann |
Generate data facets for the computed states.
facets-slt
|
| Fri, 17 Jun 2011 14:03:29 +0000 |
Sascha L. Teichmann |
Add facet to access raw computed data.
facets-slt
|
| Fri, 17 Jun 2011 13:45:50 +0000 |
Sascha L. Teichmann |
Base WST/CSV exports on facets. TODO: generate the facets.
facets-slt
|
| Fri, 17 Jun 2011 13:10:20 +0000 |
Sascha L. Teichmann |
call computeAdvance() if we want to advance.
facets-slt
|
| Fri, 17 Jun 2011 11:23:57 +0000 |
Sascha L. Teichmann |
mico opt: inter cmps are faster than str cmps.
facets-slt
|
| Fri, 17 Jun 2011 11:08:31 +0000 |
Sascha L. Teichmann |
make getGauges() more robust
facets-slt
|
| Fri, 17 Jun 2011 10:40:54 +0000 |
Sascha L. Teichmann |
Removed ComputeCallback because this was thought too complicated. Fixed issue with facets not be re-generated if same state is entered again.
facets-slt
|
| Fri, 17 Jun 2011 09:19:43 +0000 |
Ingo Weinzierl |
OutGenerators use now facets to fetch necessary data.
facets-slt
|
| Thu, 16 Jun 2011 14:31:41 +0000 |
Ingo Weinzierl |
OutGenerators doOut() takes a facet object now instead of just its name.
facets-slt
|
| Thu, 16 Jun 2011 14:10:49 +0000 |
Ingo Weinzierl |
Add index and description of facets to collections describe document.
facets-slt
|
| Thu, 16 Jun 2011 13:24:00 +0000 |
Ingo Weinzierl |
Write computed facets into artifacts describe document.
facets-slt
|
| Thu, 16 Jun 2011 10:05:44 +0000 |
Ingo Weinzierl |
Generated facets for each output aspect.
facets-slt
|
| Thu, 16 Jun 2011 09:04:59 +0000 |
Ingo Weinzierl |
Store facets for each state.
facets-slt
|
| Thu, 16 Jun 2011 08:57:05 +0000 |
Ingo Weinzierl |
Use enums to dispatch computeFeed() and computeAdvance().
facets-slt
|
| Thu, 16 Jun 2011 08:43:58 +0000 |
Ingo Weinzierl |
Added two more compute() methods to ComputeCallback to distinguish between different phases of the artifact.
facets-slt
|
| Thu, 16 Jun 2011 08:25:06 +0000 |
Ingo Weinzierl |
Moved Waterlevel state into the correct package.
facets-slt
|
| Thu, 16 Jun 2011 07:50:56 +0000 |
Ingo Weinzierl |
Added a compute() method to WINFOArtifact which acts as a dispatcher for different computations. It triggers a calculation based on ComputeCallbacks that are generated by the current states.
facets-slt
|
| Wed, 15 Jun 2011 15:28:54 +0000 |
Ingo Weinzierl |
Merged with trunk and introduced hashing of computed values.
facets-slt
|
| Fri, 17 Jun 2011 13:00:54 +0000 |
Ingo Weinzierl |
Added a parameter 'wq_free' that determines that mode of calculation 1 (specifies if the calculation is bound to a gauge or not).
|
| Fri, 17 Jun 2011 12:38:41 +0000 |
Ingo Weinzierl |
DischargeLongitudinalSectionCurve will have corrected W facets now.
|
| Tue, 14 Jun 2011 16:26:59 +0000 |
Sascha L. Teichmann |
DistanceInfoService: Got rid of namespace in result document.
|
| Tue, 14 Jun 2011 15:34:27 +0000 |
Ingo Weinzierl |
#77 The curves in a duration chart will have names now.
|
| Tue, 14 Jun 2011 13:54:19 +0000 |
Ingo Weinzierl |
The min/max W/Q ranges in the panel for calculation4 are written into the DESCRIBE.
|
| Tue, 14 Jun 2011 13:53:25 +0000 |
Sascha L. Teichmann |
Write top 'Oberkante' and bottom 'Unterkante' to out going XML if they exist.
|
| Tue, 14 Jun 2011 10:38:00 +0000 |
Ingo Weinzierl |
The state that is used to enter locations writes the river's range into the DESCRIBE now.
|
| Fri, 10 Jun 2011 15:59:47 +0000 |
Sascha L. Teichmann |
Added error reporting to 'Wasserspiegellage' calculation.
|
| Fri, 10 Jun 2011 14:24:15 +0000 |
Sascha L. Teichmann |
Added error reporting to 'Abflusskurve' calculation.
|
| Fri, 10 Jun 2011 12:38:08 +0000 |
Sascha L. Teichmann |
Added error reporting to 'Dauerzahlen' calculation.
|
| Fri, 10 Jun 2011 10:10:04 +0000 |
Sascha L. Teichmann |
Added methods to remove NaN values.
|
| Fri, 10 Jun 2011 09:19:27 +0000 |
Sascha L. Teichmann |
Added calculation base class to collect the problems during the calculations. Adjusted calculation 4 to use the mechanism.
|
| Thu, 09 Jun 2011 10:48:13 +0000 |
Ingo Weinzierl |
Changed the zoom process - the values in the chart request document are percentual values that apply to every axis.
|
| Thu, 09 Jun 2011 10:31:22 +0000 |
Ingo Weinzierl |
Corrected axes/datasets mappings.
|
| Wed, 08 Jun 2011 19:11:18 +0000 |
Sascha L. Teichmann |
Berechnung 4: Determine the gauges by their station position. This hopefully fixes segment assignment problems.
|
| Wed, 08 Jun 2011 18:50:40 +0000 |
Sascha L. Teichmann |
Berechnung 4: Added more debug output
|
| Wed, 08 Jun 2011 13:57:43 +0000 |
Ingo Weinzierl |
#103 PART 1: The numbers which are written into the static DESCRIBE part are i18n formatted now.
|
| Wed, 08 Jun 2011 13:32:56 +0000 |
Ingo Weinzierl |
#93 Changed the name of calculation type 4.
|
| Wed, 08 Jun 2011 13:03:21 +0000 |
Ingo Weinzierl |
Made the chart range determination more robust against NaN values.
|
| Wed, 08 Jun 2011 12:35:44 +0000 |
Ingo Weinzierl |
Set the second y axis to axis position 1 (starts at 0).
|
| Wed, 08 Jun 2011 10:25:39 +0000 |
Sascha L. Teichmann |
s@m³/s@m\\u00b3/s@
|
| Wed, 08 Jun 2011 10:21:36 +0000 |
Sascha L. Teichmann |
s@m³/s@m\u00b3/s@
|
| Wed, 08 Jun 2011 10:19:23 +0000 |
Sascha L. Teichmann |
Only generate an axis element if a axis really exists.
|
| Tue, 07 Jun 2011 21:01:09 +0000 |
Sascha L. Teichmann |
BackJumpCorrector: Simpified array swapping.
|
| Tue, 07 Jun 2011 15:05:12 +0000 |
Sascha L. Teichmann |
Use java.util.List instead of java.util.Vector. Removed superfluous imports.
|
| Tue, 07 Jun 2011 14:28:44 +0000 |
Sascha L. Teichmann |
code clean up in states
|
| Tue, 07 Jun 2011 13:15:02 +0000 |
Ingo Weinzierl |
The ChartInfoGenerator appends axes range information to the document now.
|
| Tue, 07 Jun 2011 11:43:30 +0000 |
Sascha L. Teichmann |
If Artifact.feed() fails do not store invalid values in database.
|
| Mon, 06 Jun 2011 11:34:44 +0000 |
Sascha L. Teichmann |
Removed asymmetrical "- 1" from width calculation.
|
| Sun, 05 Jun 2011 20:47:51 +0000 |
Sascha L. Teichmann |
Berechnung 4: Fixed problem when more than one value per segment are given.
|
| Sun, 05 Jun 2011 18:24:46 +0000 |
Sascha L. Teichmann |
Refactored version of "Berechnung 4"
|
| Fri, 03 Jun 2011 10:21:13 +0000 |
Ingo Weinzierl |
#90 Removed margins between data area border and curves.
|
| Fri, 03 Jun 2011 07:20:39 +0000 |
Ingo Weinzierl |
Refactored the chart creation in the ChartInfoGenerators. Now, every chart is created by the XYChartGenerator again.
|
| Fri, 03 Jun 2011 06:47:51 +0000 |
Ingo Weinzierl |
Charts are zoomed to a specified view if the attribute document for the chart creation contains an x and/or y range.
|
| Thu, 02 Jun 2011 15:47:08 +0000 |
Sascha L. Teichmann |
Set collection ttl to 6 hours.
|
| Wed, 01 Jun 2011 17:01:44 +0000 |
Sascha L. Teichmann |
Added parser for segments
|
| Wed, 01 Jun 2011 09:57:22 +0000 |
Sascha L. Teichmann |
Fix crashes in back jump correction.
|
| Wed, 01 Jun 2011 09:18:00 +0000 |
Ingo Weinzierl |
The matrix that is used to transform chart image coordinates into chart coordinates supports inverted x-axis now.
|
| Wed, 01 Jun 2011 08:01:07 +0000 |
Ingo Weinzierl |
Introduced a new output generators for creating chart info documents.
|
| Tue, 31 May 2011 14:56:18 +0000 |
Ingo Weinzierl |
Added support for the 'type' parameter of the collection's out() operation.
|
| Tue, 31 May 2011 09:35:19 +0000 |
Sascha L. Teichmann |
Use an explicit reference km for interpolation now.
|
| Mon, 30 May 2011 11:34:06 +0000 |
Sascha L. Teichmann |
Introduce a cache for the distance-info service
|
| Mon, 30 May 2011 09:19:57 +0000 |
Sascha L. Teichmann |
flys/issue82: Only successful interpolations are named.
|
| Fri, 27 May 2011 16:52:37 +0000 |
Sascha L. Teichmann |
Re-eanbled the calculation of the backjump correction.
|
| Fri, 27 May 2011 10:09:46 +0000 |
Ingo Weinzierl |
Removed XML debug statement.
|
