Mercurial > dive4elements > river

log

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
less more | rev 7491: (0) -3000 -1000 -192 +192 +1000 tip
age author description
Fri, 01 Nov 2013 11:13:38 +0100 Felix Wolfsteller issue1571: Hav eown folder in dc for vollmer curves.
Fri, 01 Nov 2013 11:12:38 +0100 Felix Wolfsteller issue1571: i18n.
Fri, 01 Nov 2013 11:50:11 +0100 Sascha L. Teichmann Removed redundant lookup for km in call context.
Thu, 31 Oct 2013 21:56:04 +0100 Tom Gottfried WST-Parser: revert the assumption of only complete columns.
Thu, 31 Oct 2013 19:16:42 +0100 Tom Gottfried Correct r7481: use ParseException instead of IllegalArgument that was catched at wrong place.
Thu, 31 Oct 2013 19:03:57 +0100 Sascha L. Teichmann Removed charset encoding on outs. They are mainly binary data which simply should be proxied through.
Thu, 31 Oct 2013 18:34:10 +0100 Sascha L. Teichmann Merged
Thu, 31 Oct 2013 18:30:46 +0100 Sascha L. Teichmann WQDay is increasing(?) if it is empty of last is greater than first.
Thu, 31 Oct 2013 18:26:49 +0100 Sascha L. Teichmann Dont assume that wqdays are always of none zero length.
Thu, 31 Oct 2013 18:25:26 +0100 Sascha L. Teichmann Datacage recommendations: Sort outs to to generate consistent cache keys.
Thu, 31 Oct 2013 15:25:31 +0100 Tom Gottfried WST-Parser and doc: reject files with wrong number of columns.
Thu, 31 Oct 2013 13:11:03 +0100 Tom Gottfried WST-Parser: Improve handling of line-endings.
Thu, 31 Oct 2013 11:56:45 +0100 Tom Gottfried Log errors instead of starting WSPLGEN if required arguments are missing.
Thu, 31 Oct 2013 11:44:09 +0100 Felix Wolfsteller issue1657: Adjust DC conf to spawn sounding widths.
Thu, 31 Oct 2013 11:43:32 +0100 Felix Wolfsteller issue1657: Spawn BEDHEIGHT_SOUNDING_WIDTH facet if asked to. Twiggly.
Thu, 31 Oct 2013 11:41:39 +0100 Felix Wolfsteller i18n for sounding with axis and facet.
Wed, 30 Oct 2013 17:35:12 +0100 Sascha L. Teichmann Datacage recommendations caching: Use LFU strategy to rotate parameter recommendations out earlier. This should be a better config in multiuser user setups because the more frequently used terminal state recs will survive longer.
Wed, 30 Oct 2013 16:04:06 +0100 Felix Wolfsteller issue1345: Add flow_velocities folder.
Wed, 30 Oct 2013 16:03:28 +0100 Felix Wolfsteller issue1345: i18n for dc.
Wed, 30 Oct 2013 15:51:33 +0100 Andre Heinecke Dokumention zur Installation erweitert
Wed, 30 Oct 2013 15:26:21 +0100 Sascha L. Teichmann Experimental caching of datacage recommendations. The respective hook is called a lot and running the datacage over and over again when loading data can be expensive. So the generated recommendations are cached for some time.
Wed, 30 Oct 2013 15:02:16 +0100 Felix Wolfsteller issue1512: Fix loading of all former flow vel. calculation via folder.
Wed, 30 Oct 2013 14:53:26 +0100 Felix Wolfsteller issue1512: Show all flowvelocity facet in former calc. flow vel. part of dc.
Wed, 30 Oct 2013 12:24:03 +0100 Felix Wolfsteller issue1571: i18n.
Wed, 30 Oct 2013 12:03:07 +0100 Felix Wolfsteller issue1572: Call longitudinal-section-user-prototype for bedheight-diffs/year.
Wed, 30 Oct 2013 11:59:09 +0100 Sascha L. Teichmann Merged
Wed, 30 Oct 2013 11:58:57 +0100 Sascha L. Teichmann Datacage: Remove tree branches vom datacage tree on client side which do not contain loadable data.
Wed, 30 Oct 2013 11:57:04 +0100 Sascha L. Teichmann Simplified recommendattion monitor code a bit.
Wed, 30 Oct 2013 11:56:13 +0100 Sascha L. Teichmann Code cleanup.
Wed, 30 Oct 2013 11:55:10 +0100 Sascha L. Teichmann Fix for flys/issue1654: Divide through denisity, do not multiply.
Tue, 29 Oct 2013 19:59:59 +0100 Tom Gottfried Schema change: add lookup table for sediment yield kinds to have its values documented.
Tue, 29 Oct 2013 19:46:41 +0100 Sascha L. Teichmann flys/issue1625: Changed default sediment density factor from 1.8 to 1.9 . The value can be changed by adusting conf.xml (/artifact-databae/options/sediment-density-factor/text()).
Tue, 29 Oct 2013 19:17:28 +0100 Tom Gottfried Importer: document where annotations are searched for.
Tue, 29 Oct 2013 18:57:40 +0100 Tom Gottfried run_geo.sh: allow logging as documented.
Tue, 29 Oct 2013 11:32:56 +0100 Felix Wolfsteller issue1397: Fix reference_curve former calculations in dc.
Tue, 29 Oct 2013 11:31:59 +0100 Felix Wolfsteller dc i18n.
Tue, 29 Oct 2013 10:42:12 +0100 Felix Wolfsteller issue1512: Repair loading all of flowvelocitymeasurements by not equipping
Mon, 28 Oct 2013 15:46:26 +0100 Andre Heinecke inor Layout + Wiki
Mon, 28 Oct 2013 14:22:02 +0100 Andre Heinecke Rechtschreibkorrektur (durchgeführt von Bettina)
Mon, 28 Oct 2013 14:15:53 +0100 Andre Heinecke More installation documentation
Mon, 28 Oct 2013 12:14:46 +0100 Felix Wolfsteller issue1345: Sort sediment densities by year.
Mon, 28 Oct 2013 11:52:14 +0100 Felix Wolfsteller meta-data.xml: Simplify query for densities a bit, sort by depth.
Sun, 27 Oct 2013 17:30:38 +0100 Andre Heinecke Start installation documentation for specific client installation
Fri, 25 Oct 2013 17:06:30 +0200 Tom Gottfried Importer doc: fix some outdated or wrong infos.
Fri, 25 Oct 2013 16:57:15 +0200 Tom Gottfried Importer and doc: Warn instead of die if AT- or STA-file is missing for a gauge.
Fri, 25 Oct 2013 14:32:11 +0200 Felix Wolfsteller FacetTypes: Cosmetics.
Fri, 25 Oct 2013 14:31:56 +0200 Felix Wolfsteller Declare certain bedheight-diagrams as charttypes, for manual points.
Fri, 25 Oct 2013 14:29:38 +0200 Felix Wolfsteller meta-data.xml: Include bedheight-diffs per year in minfo-user-dc.
Fri, 25 Oct 2013 14:10:29 +0200 Felix Wolfsteller meta-data.xml: Subsume the different bed-quality dc-nodes.
Fri, 25 Oct 2013 13:53:48 +0200 Felix Wolfsteller i18n for dc added.
Fri, 25 Oct 2013 13:52:47 +0200 Felix Wolfsteller meta-data.xml: Ease i18nability.
Fri, 25 Oct 2013 15:39:59 +0200 Tom Gottfried Geoimporter: be case-insensitive when looking for floodplains.
Fri, 25 Oct 2013 15:02:08 +0200 Tom Gottfried make-opt-package.sh: give path to internal 'repository'.
Fri, 25 Oct 2013 07:25:19 +0200 Felix Wolfsteller meta-data.xml: Remove duplicates and 'special' macros fro special outs from
Fri, 25 Oct 2013 07:24:15 +0200 Felix Wolfsteller meta-data.xml: Remove delta-wt from longitudinal-section-user-prototype .
Fri, 25 Oct 2013 07:16:16 +0200 Felix Wolfsteller Fix Typo in german i18n (e.g. issue1345) .
Wed, 23 Oct 2013 17:45:56 +0200 Felix Wolfsteller Partly revert rev 7419, conservative guess about which "outs" are handcrafted.
Fri, 25 Oct 2013 03:47:04 +0200 Sascha L. Teichmann Experimental patch: Do not run datacage on artifacts that are loaded from datacage. His hopefully minimizes the datacage runs when a lot of data is loaded.
Thu, 24 Oct 2013 23:06:40 +0200 Tom Gottfried Importer doc: fix some layout issues.
Wed, 23 Oct 2013 17:20:55 +0200 Felix Wolfsteller Made SedimentDensityValue Serializable.
Wed, 23 Oct 2013 17:20:30 +0200 Felix Wolfsteller issue1345: Re-enable sediment load total loads, now that factory is fixed.
Wed, 23 Oct 2013 17:19:30 +0200 Felix Wolfsteller Fix total sediment load fetching.
Wed, 23 Oct 2013 17:08:07 +0200 Felix Wolfsteller issue1345: Showing sediment densitie by depth, comment total load.
Wed, 23 Oct 2013 14:53:47 +0200 Tom Gottfried Fix typo.
Wed, 23 Oct 2013 12:43:26 +0200 Andre Heinecke (issue965) Handle the case that diffids are not available
Wed, 23 Oct 2013 12:09:36 +0200 Felix Wolfsteller meta-data.xml: Be less restrictive in showing facets from waterlevels-discharge.
Wed, 23 Oct 2013 12:08:30 +0200 Felix Wolfsteller meta-data.xml: Exclude empty.facet s.
Wed, 23 Oct 2013 12:07:35 +0200 Felix Wolfsteller meta-meta.xml: Also fetch extreme_base curves via dc.
Wed, 23 Oct 2013 12:07:05 +0200 Felix Wolfsteller meta-data.xml: cosmetics.
Wed, 23 Oct 2013 11:41:24 +0200 Felix Wolfsteller Add another axis (height) to longitudinal-diagram-defaults.
Wed, 23 Oct 2013 11:33:31 +0200 Felix Wolfsteller meta-data.xml: Cosmetics.
Wed, 23 Oct 2013 11:22:47 +0200 Felix Wolfsteller meta-data.xml: More usage of collection-group-macro.
Wed, 23 Oct 2013 11:28:25 +0200 Sascha L. Teichmann Datacage: Consequently call macro 'longitudinal-section-user-prototype' in all longitudinal sections of old calculation. Moved asymmeterical stuff to prototype. This may crash!
Wed, 23 Oct 2013 11:04:06 +0200 Felix Wolfsteller meta-data.xml: Create and use collection-group macro.
Wed, 23 Oct 2013 09:59:46 +0200 Tom Gottfried BedHeightSingleParser: fix no-data-line detection.
Wed, 23 Oct 2013 08:20:11 +0200 Sascha L. Teichmann Datacage ref doc: More docs on functions.
Tue, 22 Oct 2013 17:00:47 +0200 Sascha L. Teichmann Datacage ref doc: More docs for functions.
Tue, 22 Oct 2013 16:24:08 +0200 Felix Wolfsteller issue1205: made SedimentDensity serializable.
Tue, 22 Oct 2013 15:51:33 +0200 Felix Wolfsteller meta-data.xml: Switch more longitudinal-section like user-dc content to prototype macro.
Tue, 22 Oct 2013 15:43:13 +0200 Sascha L. Teichmann Datacage: Fixed macro call.
Tue, 22 Oct 2013 15:34:51 +0200 Sascha L. Teichmann Fixed meta-data.xml
Tue, 22 Oct 2013 15:07:24 +0200 Sascha L. Teichmann Datacage ref doc: More doc for functions.
Tue, 22 Oct 2013 12:21:21 +0200 Felix Wolfsteller issue1512: Sort flow-velocity-models by discharge_zone.value.
Tue, 22 Oct 2013 12:15:33 +0200 Felix Wolfsteller issue1473: Show differences project name in dc.
Tue, 22 Oct 2013 11:57:17 +0200 Felix Wolfsteller meta-data.xml: Fix referenced out for discharge_longitudinal_section.
Mon, 21 Oct 2013 19:05:41 +0200 Andre Heinecke (issue965) Add a comment to explain what we do here
Mon, 21 Oct 2013 18:57:30 +0200 Andre Heinecke (issue965) Use new datacage magic to have year filtering for bedheights
Mon, 21 Oct 2013 17:54:34 +0200 Tom Gottfried Importer doc: mention flow direction retrieval from WST.
Mon, 21 Oct 2013 17:43:01 +0200 Sascha L. Teichmann Removed dc:to-date(). Added 'date' type for <dc:convert> instead.
Mon, 21 Oct 2013 12:21:40 +0200 Felix Wolfsteller issue1521: Adhere more to dc 'spec', show discharges of flow velocity models.
Mon, 21 Oct 2013 12:22:40 +0200 Sascha L. Teichmann Datacage reference doc: Explain dc:container-context and dc:properties.
Mon, 21 Oct 2013 11:43:50 +0200 Sascha L. Teichmann Datacage: Added TODOs for new functions in ref document.
Mon, 21 Oct 2013 11:28:14 +0200 Felix Wolfsteller issue1512: Make double entry of Q facet for flowvelocities dissappear.
Fri, 18 Oct 2013 16:41:10 +0200 Felix Wolfsteller Fix typo in german i18n.
Fri, 18 Oct 2013 12:20:55 +0200 Felix Wolfsteller issue1512: improved i18n for flow velocity measurement facets.
Thu, 17 Oct 2013 16:15:14 +0200 Felix Wolfsteller BedHeightProcessor: Finally display heights, not widths.
Thu, 17 Oct 2013 15:36:13 +0200 Felix Wolfsteller BedHeightProcessor: Set axis label.
Thu, 17 Oct 2013 15:36:00 +0200 Felix Wolfsteller BedHeight(Sounding)Processor: Use FacetTypes.
Thu, 17 Oct 2013 15:23:07 +0200 Felix Wolfsteller Removed debris.
Thu, 17 Oct 2013 15:21:57 +0200 Felix Wolfsteller Moved BedHeightEpoch to BedHeightEpochData.
Thu, 17 Oct 2013 15:08:59 +0200 Felix Wolfsteller Renamed artifacts/**/BedHeight(Single) to BedHeight(Single)Data, to resolve
Thu, 17 Oct 2013 11:12:14 +0200 Felix Wolfsteller Stub for new BedHeightProcessor.
Thu, 17 Oct 2013 10:53:34 +0200 Felix Wolfsteller BedHeightSoundingProcessor: Log if data is now handled.
Thu, 17 Oct 2013 10:50:04 +0200 Felix Wolfsteller BedHeightSoundingProcessor: refactored to avoid drifting behavior when using
Thu, 17 Oct 2013 09:40:12 +0200 Felix Wolfsteller meta-data.xml: cleanup longitudinal-section-user-prototype, removing dupes.
Mon, 21 Oct 2013 10:49:39 +0200 Sascha L. Teichmann Removed same package import.
Mon, 21 Oct 2013 10:48:51 +0200 Sascha L. Teichmann Removed obsolete import.
Fri, 18 Oct 2013 18:40:50 +0200 Sascha L. Teichmann Datacage: Add function dc:to-date(number) which converts a epoch base number to a date object.
Fri, 18 Oct 2013 18:36:18 +0200 Sascha L. Teichmann Datacage: Added dc:min-number(list) and dc:max-number(list) to extract the numerical
Fri, 18 Oct 2013 18:15:33 +0200 Sascha L. Teichmann Datacage: Add function dc:find-all(needle, haystack).
Fri, 18 Oct 2013 15:44:01 +0200 Andre Heinecke (issue1474) Fix deepCopy signatures and actually copy the facet index now
Fri, 18 Oct 2013 15:30:44 +0200 Andre Heinecke (issue1071) Handle the case where no MeasurementStation exists
Thu, 17 Oct 2013 18:56:44 +0200 Sascha L. Teichmann More datacage ref doc.
Thu, 17 Oct 2013 18:37:56 +0200 Andre Heinecke (issue1474) Fix copying of SQ* Facets
Thu, 17 Oct 2013 17:47:58 +0200 Tom Gottfried Importer: Avoid 0-lenght Q-ranges in WST-CSV-parsers.
Thu, 17 Oct 2013 15:26:12 +0200 Sascha L. Teichmann Replaced more tabs with spaces + minor cosmetics (removed out commented code from double precision branch).
Thu, 17 Oct 2013 15:13:32 +0200 Sascha L. Teichmann Replaced tabs with 4 spaces.
Thu, 17 Oct 2013 15:05:08 +0200 Tom Gottfried WstParser: Do not add Q-range for trailing Q-line.
Thu, 17 Oct 2013 12:14:10 +0200 Sascha L. Teichmann Removed obsolete imports.
Thu, 17 Oct 2013 12:11:09 +0200 Sascha L. Teichmann Removed obsolete import + whitespace cleanup.
Thu, 17 Oct 2013 08:29:46 +0200 Felix Wolfsteller Add getModelDescription to FlowVelocityModel.
Thu, 17 Oct 2013 07:48:51 +0200 Felix Wolfsteller White space cosmetics, added debug output.
Thu, 17 Oct 2013 07:46:36 +0200 Felix Wolfsteller SedimentYieldArtifact: Accept 'total' load, genreate facet for it.
Thu, 17 Oct 2013 07:45:41 +0200 Felix Wolfsteller FlowVelocityModelArtifact: Slightly improve facet names.
Thu, 17 Oct 2013 07:45:13 +0200 Felix Wolfsteller Cosmetics.
Thu, 17 Oct 2013 07:44:34 +0200 Felix Wolfsteller Cosmetics.
Thu, 17 Oct 2013 07:42:31 +0200 Felix Wolfsteller issue1473: Let vollmer curves appear under 'former calc/waterlevels from fix.'.
Thu, 17 Oct 2013 07:39:42 +0200 Felix Wolfsteller cosmetics.
Wed, 16 Oct 2013 15:25:56 +0200 Felix Wolfsteller Adjusted i18n to match the one in client.
Wed, 16 Oct 2013 18:48:02 +0200 Andre Heinecke Use more failsave pattern for SQ-facets.
Wed, 16 Oct 2013 18:46:43 +0200 Andre Heinecke Configure correct name for SQ-relation C-chart.
Wed, 16 Oct 2013 15:23:04 +0200 Felix Wolfsteller i18n for total load dc.
Wed, 16 Oct 2013 15:22:18 +0200 Felix Wolfsteller Offer total loads in dc.
Wed, 16 Oct 2013 15:21:14 +0200 Felix Wolfsteller Added i18n for upcoming total load via dc.
Wed, 16 Oct 2013 10:42:45 +0200 Felix Wolfsteller Refactoring: Move functionality of BedHeightAccess into BedHeightFacet for now.
Wed, 16 Oct 2013 10:33:09 +0200 Felix Wolfsteller Minor BedHeightAccess refactoring.
Wed, 16 Oct 2013 14:43:27 +0200 Tom Gottfried Remove code that was previously commented out.
Wed, 16 Oct 2013 14:40:19 +0200 Tom Gottfried BedHeightSingleParser: do not omit lines if last column is empty.
Wed, 16 Oct 2013 13:06:30 +0200 Sascha L. Teichmann Jim, he's dead. double-precision
Wed, 16 Oct 2013 13:03:13 +0200 Sascha L. Teichmann Merged double-precision branch.
Wed, 16 Oct 2013 12:57:40 +0200 Sascha L. Teichmann Merge branch default double-precision
Wed, 16 Oct 2013 12:39:33 +0200 Sascha L. Teichmann Reorder generation of static part of describe document for fast XML DOM handling.
Wed, 16 Oct 2013 12:00:29 +0200 Andre Heinecke (issue1353) Document that there are more things to syncing then just the Number
Wed, 16 Oct 2013 11:45:23 +0200 Andre Heinecke (issue1474) Add sqrelation user data and disable filtering for it
Wed, 16 Oct 2013 11:42:53 +0200 Andre Heinecke Add debug output for variables in user context
Tue, 15 Oct 2013 17:01:20 +0200 Andre Heinecke Break sometimes when dumping variables. Still ugly but a bit nicer.
Wed, 16 Oct 2013 10:18:19 +0200 Tom Gottfried Importer doc: fix syntax error. double-precision
Wed, 16 Oct 2013 09:56:15 +0200 Tom Gottfried BedHeightSingleParser: do not log every data line in file. double-precision
Tue, 15 Oct 2013 19:49:25 +0200 Tom Gottfried Do not log trace of WST-Parser parse exception and document it. double-precision
Tue, 15 Oct 2013 19:19:45 +0200 Tom Gottfried WST-Parser: check consistence of station ordering in file. double-precision
Tue, 15 Oct 2013 19:18:44 +0200 Tom Gottfried Comments. double-precision
Tue, 15 Oct 2013 18:41:55 +0200 Tom Gottfried Merged changes from default into double precision branch. double-precision
Tue, 15 Oct 2013 18:31:59 +0200 Sascha L. Teichmann WST Import: Added parse error exception to WST parser.
Tue, 15 Oct 2013 17:39:04 +0200 Felix Wolfsteller typo fix in doc.
Tue, 15 Oct 2013 17:38:50 +0200 Felix Wolfsteller BedHeightsArtifact: Use FacetTypes, eliminate local facet type definition.
Tue, 15 Oct 2013 17:31:44 +0200 Felix Wolfsteller Prepare new facet types for bedheights.
Tue, 15 Oct 2013 16:41:18 +0200 Felix Wolfsteller i18n for old calculations dc.
Tue, 15 Oct 2013 15:32:36 +0200 Tom Gottfried Importer manual: use unique revision identifier. double-precision
Tue, 15 Oct 2013 15:37:54 +0200 Felix Wolfsteller Add aforementioned user-prototype.
Tue, 15 Oct 2013 15:37:24 +0200 Felix Wolfsteller Prototypically add longitudinal-section-user-prototype, with issues.
Tue, 15 Oct 2013 15:25:09 +0200 Tom Gottfried Importer packaging: run pdflatex three times to get references and page numbering right. double-precision
Tue, 15 Oct 2013 15:06:29 +0200 Felix Wolfsteller issue1345: Show bedheight_type in tooltip.
Tue, 15 Oct 2013 15:03:51 +0200 Felix Wolfsteller issue1345: Bring back waterlevel/diffs from fixation into minfo dc element.
Tue, 15 Oct 2013 14:41:39 +0200 Felix Wolfsteller Fix DC group-by statement, there is no 'oid' variable around.
Tue, 15 Oct 2013 07:06:19 +0200 Felix Wolfsteller issue1345: DC: group bed heights of single years by year.
Tue, 15 Oct 2013 14:45:46 +0200 Tom Gottfried Importer: skip historical discharge tables per default as they come via ETL. double-precision
Tue, 15 Oct 2013 10:11:38 +0200 Tom Gottfried Add warning on errors when importing duplicates. double-precision
Mon, 14 Oct 2013 17:41:19 +0200 Felix Wolfsteller issue1345: Fix sediment load facet type, adjust theme name.
Mon, 14 Oct 2013 17:40:31 +0200 Felix Wolfsteller have same translations for sediment loads fractions.
Mon, 14 Oct 2013 16:38:16 +0200 Sascha L. Teichmann Datacage doc ref: Explain dc:group
Mon, 14 Oct 2013 16:06:36 +0200 Sascha L. Teichmann Datacage ref doc: Explain dc:filter.
Mon, 14 Oct 2013 15:55:36 +0200 Sascha L. Teichmann Datacage ref doc: Move dc:if & dc:choose up because they are more important than other elements.
Mon, 14 Oct 2013 15:53:06 +0200 Sascha L. Teichmann Datacage ref doc: Explain dc:for-each
Mon, 14 Oct 2013 15:43:34 +0200 Sascha L. Teichmann Datacage ref doc: Explain dc:virtual-column.
Mon, 14 Oct 2013 15:27:49 +0200 Sascha L. Teichmann Datacage ref doc: Explain dc:macro & Co.
Mon, 14 Oct 2013 14:40:51 +0200 Sascha L. Teichmann Datacage ref doc: Explain dc:variable and dc:convert.
Mon, 14 Oct 2013 13:44:54 +0200 Sascha L. Teichmann Dataage ref doc: Explain dc:context, dc:comment
Mon, 14 Oct 2013 13:08:33 +0200 Sascha L. Teichmann Datacage ref doc: More structure. Explain text interpolation.
Mon, 14 Oct 2013 12:16:33 +0200 Felix Wolfsteller Added sedimentdensity i18n.
Mon, 14 Oct 2013 12:15:34 +0200 Felix Wolfsteller issue1345: Added getDepth() to SedimentDensityFactory.
Mon, 14 Oct 2013 12:14:20 +0200 Felix Wolfsteller issue1345: Change Sediment Density Facet label.
Mon, 14 Oct 2013 11:49:15 +0200 Felix Wolfsteller SedimentDensityProcessor: Fix, use getAllDensities instead of only dens. in year 2006.
Mon, 14 Oct 2013 11:48:38 +0200 Felix Wolfsteller SedimentDensity: Fix getAllDensities and made it public.
Mon, 14 Oct 2013 10:01:33 +0200 Felix Wolfsteller i18n for dc and facet name generation.
Mon, 14 Oct 2013 09:55:41 +0200 Felix Wolfsteller cosmetics.
Mon, 14 Oct 2013 09:53:54 +0200 Felix Wolfsteller issue1345: Adjust name of sediment yield/load facets to include fraction name and times.
Mon, 14 Oct 2013 09:52:17 +0200 Felix Wolfsteller issue1345: Prepare SedimentLoadFactory to deliver fraction name and time ranges.
Mon, 14 Oct 2013 09:51:27 +0200 Felix Wolfsteller cosmetics.
Mon, 14 Oct 2013 07:33:32 +0200 Felix Wolfsteller Comment in meta-data.xml.
Mon, 14 Oct 2013 07:31:32 +0200 Felix Wolfsteller cosmetical description fix.
Sat, 12 Oct 2013 10:26:45 +0200 Sascha L. Teichmann Removed obsolete imports.
Fri, 11 Oct 2013 18:40:33 +0200 Andre Heinecke (issue1529) Be more tolerant in the fitting.
less more | rev 7491: (0) -3000 -1000 -192 +192 +1000 tip
http://dive4elements.wald.intevation.org