log

age author description
Thu, 01 Mar 2012 12:12:20 +0000 Felix Wolfsteller Cosmetics, docs.
Mon, 27 Feb 2012 14:16:30 +0000 Sascha L. Teichmann Added functions to be used for fitting in the "Fixierungsanalyse" and "Extremwertermittlung".
Mon, 27 Feb 2012 10:50:14 +0000 Felix Wolfsteller Added ommitted i18n.
Mon, 27 Feb 2012 10:49:20 +0000 Felix Wolfsteller fix flys/issue638 (area between certain datatypes).
Mon, 27 Feb 2012 09:09:54 +0000 Felix Wolfsteller Partial fix flys/issue637 (wording).
Tue, 21 Feb 2012 18:22:06 +0000 Sascha L. Teichmann FixingsOverview: Added XSL transformation which directly converts the output of the fixings overview service into an HTML representation.
Mon, 20 Feb 2012 19:13:19 +0000 Sascha L. Teichmann FixingsOverviewService: Made the filter mechanisms available via the incoming XML document.
Mon, 20 Feb 2012 16:41:45 +0000 Sascha L. Teichmann FixingsOverview: Added a filter mechanism for generating output.
Mon, 20 Feb 2012 14:36:28 +0000 Sascha L. Teichmann FixingsOverview: Construct the Q sectors once.
Sun, 19 Feb 2012 17:14:39 +0000 Sascha L. Teichmann Service to generate the data needed to build the "Fixerungen pro Fluss Uebersicht"
Fri, 17 Feb 2012 14:16:50 +0000 Sascha L. Teichmann WstValueTable: Forget to check in the range method of getMinMaxQ().
Fri, 17 Feb 2012 14:04:54 +0000 Sascha L. Teichmann WstValueTable: Symmetrical to getMinMaxW() add two methods to find min/max Q for a given
Fri, 17 Feb 2012 11:59:30 +0000 Sascha L. Teichmann WstValueTable: Added method to find the w extent for a given km range.
Fri, 17 Feb 2012 11:29:14 +0000 Sascha L. Teichmann WstValueTable: Added method to find the w extent for a given km.
Fri, 17 Feb 2012 11:03:28 +0000 Raimund Renkert Renamed state data fields for W/Q input.
Fri, 17 Feb 2012 09:20:02 +0000 Raimund Renkert Write the gauge description instead of the Q value to CSV file.
Fri, 17 Feb 2012 07:49:41 +0000 Ingo Weinzierl Apply legend specific settings (show/hide) in timeseries charts.
Fri, 17 Feb 2012 07:45:27 +0000 Ingo Weinzierl Some refactoring in chart creation; timeseries charts are now able to apply plot specific settings as well.
Thu, 16 Feb 2012 12:36:25 +0000 Raimund Renkert Refactored the wq data fields.
Thu, 16 Feb 2012 12:30:33 +0000 Sascha L. Teichmann Fixed W->Q conversion for "W fuer ungleichwertige Abflusslaengsschnitte."
Thu, 16 Feb 2012 12:15:11 +0000 Ingo Weinzierl #509 Set the lower bounds of duration curves Q axis to 0 if no zoom has taken place.
Thu, 16 Feb 2012 11:58:10 +0000 Felix Wolfsteller Removed not needed function from interface.
Tue, 29 May 2012 05:08:18 +0000 Ingo Weinzierl Merged revisions 4541,4544 via svnmerge from
Mon, 28 May 2012 16:38:24 +0000 Ingo Weinzierl Merged revisions 4541 via svnmerge from
Sun, 27 May 2012 12:58:01 +0000 Ingo Weinzierl Merged revisions 4533 via svnmerge from
Thu, 24 May 2012 13:22:15 +0000 Raimund Renkert Issue 671.
Thu, 24 May 2012 11:16:01 +0000 Raimund Renkert Resized the km spinner for cross section themes.
Thu, 24 May 2012 10:12:02 +0000 Raimund Renkert Set the facet and the index to valid values.
Thu, 24 May 2012 05:25:38 +0000 Felix Wolfsteller Cosmetics.
Wed, 23 May 2012 12:55:46 +0000 Raimund Renkert Added fixanalysis artifact.
Wed, 23 May 2012 08:59:49 +0000 Raimund Renkert Added a style chooser to the style editor to provide predefined styles and
Tue, 22 May 2012 13:30:10 +0000 Sascha L. Teichmann Removed superfluous imports.
Tue, 22 May 2012 13:20:52 +0000 Sascha L. Teichmann FixPeriodPanel: Make the names of state parameters configurable by constructor.
Mon, 21 May 2012 09:22:29 +0000 Raimund Renkert New methods in UI providers for fixings states and minor protocol changes.
Mon, 21 May 2012 09:17:24 +0000 Raimund Renkert Changed data field 'name' to 'description' in fix overview.
Mon, 21 May 2012 08:48:16 +0000 Raimund Renkert Added an int data item used in int array data and added getter that returns
Fri, 18 May 2012 12:42:57 +0000 Ingo Weinzierl Added i18n csv export and chart title for MINFO bed height calculation.
Wed, 16 May 2012 14:53:52 +0000 Ingo Weinzierl Added missing StringOptionsData class from last commit.
Wed, 16 May 2012 14:52:39 +0000 Ingo Weinzierl Added new Data type StringOptionsData; allow this Data type for ParameterMatrixPanel.
Wed, 16 May 2012 13:43:15 +0000 Sascha L. Teichmann Fixing overview: Render the Q class to the title of the sectors of the events.
Wed, 16 May 2012 13:02:44 +0000 Sascha L. Teichmann Fixing overview XSLT: Make the description of the event the title of the date column cells.
Wed, 16 May 2012 11:16:57 +0000 Ingo Weinzierl Added i18n strings for flow velocity chart output.
Wed, 16 May 2012 10:45:57 +0000 Ingo Weinzierl Implemented ParameterMatrixPanel.createOld() and added a real 'description' to Data instances in DataFactory.
Wed, 16 May 2012 08:16:13 +0000 Ingo Weinzierl Added i18n titles for flow velocity export.
Tue, 15 May 2012 15:33:43 +0000 Raimund Renkert Changed some data types in states and filter and added new preprocessing state
Tue, 15 May 2012 14:24:09 +0000 Ingo Weinzierl Implemented ParameterMatrixPanel.getData().
Tue, 15 May 2012 14:23:00 +0000 Ingo Weinzierl Revert last commit which contains configuration modifications.
Tue, 15 May 2012 14:21:39 +0000 Ingo Weinzierl Implemented ParameterMatrixPanel.getData().
Mon, 14 May 2012 15:25:14 +0000 Felix Wolfsteller Fix fixation analysis module select.
Mon, 14 May 2012 14:45:02 +0000 Ingo Weinzierl Added a new UIProvider that renders a matrix of checkboxes for user input.
Mon, 14 May 2012 10:29:05 +0000 Ingo Weinzierl Added a MINFOArtifact and improved the DistancePanel.
Mon, 14 May 2012 09:52:04 +0000 Sascha L. Teichmann Call MapFish Printer via servlet to evade viral GPLv3.
Sun, 13 May 2012 18:29:22 +0000 Felix Wolfsteller i18n for datacage/computed discharge curves.
Fri, 11 May 2012 12:42:29 +0000 Raimund Renkert Added filter object class and scrollable chart to helper panel.
Fri, 11 May 2012 08:47:48 +0000 Felix Wolfsteller Fixed a i18n string.
Thu, 10 May 2012 09:49:08 +0000 Sascha L. Teichmann Fixed problem with selecting the wrong map scale for printing.
Wed, 09 May 2012 22:01:50 +0000 Felix Wolfsteller More input checks with kmspinner.
Wed, 09 May 2012 21:44:54 +0000 Felix Wolfsteller Fix issue652: spinner input.
Wed, 09 May 2012 20:07:22 +0000 Felix Wolfsteller Added i18n strings for new showmiddleheight theme property.
Wed, 09 May 2012 16:32:49 +0000 Sascha L. Teichmann map print: Simplified config.
Wed, 09 May 2012 16:13:45 +0000 Sascha L. Teichmann map print: add legend
Wed, 09 May 2012 13:15:26 +0000 Sascha L. Teichmann Added zoom listener a adjust the print link bbox.
Wed, 09 May 2012 11:18:24 +0000 Sascha L. Teichmann map print: generate valid url to access service.
Tue, 08 May 2012 15:37:21 +0000 Sascha L. Teichmann Added link to print map.
Mon, 07 May 2012 17:18:07 +0000 Sascha L. Teichmann Printing: extract layer order and visibility from collections describe.
Mon, 07 May 2012 13:22:43 +0000 Raimund Renkert First part of the UI for fixing analysis parameter.
Fri, 04 May 2012 18:31:03 +0000 Sascha L. Teichmann Generate map print spec dynamically from artifact
Fri, 04 May 2012 17:03:04 +0000 Sascha L. Teichmann Added GET parameters to map printer
Fri, 04 May 2012 15:19:30 +0000 Sascha L. Teichmann Call MapPrinter directly and not via the MapFish Print servlet.
Thu, 03 May 2012 08:57:35 +0000 Felix Wolfsteller Added new i18n strings for theme properties of waterlevel labels in cs.
Thu, 03 May 2012 06:19:04 +0000 Ingo Weinzierl Create a link to an online help page and put it in front of the input panels.
Wed, 02 May 2012 19:07:23 +0000 Felix Wolfsteller Define order for linelabel theme properties.
Wed, 02 May 2012 19:05:16 +0000 Felix Wolfsteller Added i18 for linelabel theme property strings.
Fri, 27 Apr 2012 15:57:11 +0000 Sascha L. Teichmann Removed superfluous imports.
Thu, 26 Apr 2012 11:32:57 +0000 Sascha L. Teichmann Added dependency to MapFish Print
Thu, 26 Apr 2012 09:52:17 +0000 Felix Wolfsteller Added i18n for showlinelabel theme prop.
Wed, 25 Apr 2012 07:58:58 +0000 Raimund Renkert Issue 657.
Fri, 20 Apr 2012 15:23:27 +0000 Sascha L. Teichmann Added the XSL transformation to generate the fixings overview.
Fri, 20 Apr 2012 11:02:26 +0000 Sascha L. Teichmann Fixed incorrect servlet mapping.
Fri, 20 Apr 2012 09:41:26 +0000 Felix Wolfsteller Fix imports.
Fri, 20 Apr 2012 09:29:03 +0000 Felix Wolfsteller Improve km-Spinner behaviour, allow text input (alpha).
Thu, 19 Apr 2012 17:48:21 +0000 Sascha L. Teichmann Added stub for fixings overview service.
Thu, 19 Apr 2012 11:00:18 +0000 Sascha L. Teichmann Added new proxy servlet to bridge the fixing km chart requests to the artefact server.
Wed, 18 Apr 2012 11:42:18 +0000 Raimund Renkert Adjusted the GetFeatureInfoWindow layout.
Wed, 18 Apr 2012 09:31:32 +0000 Sascha L. Teichmann Removed superflous imports.
Wed, 18 Apr 2012 09:17:42 +0000 Felix Wolfsteller Replace spinnerItem by custom implementation to switch km in cross sections, but regress.
Wed, 18 Apr 2012 09:03:08 +0000 Felix Wolfsteller Small fix for retrieving closest km.
Wed, 18 Apr 2012 08:10:17 +0000 Raimund Renkert Open the ManualDatePointsEditor from context menu if chart is a historical
Tue, 17 Apr 2012 14:40:19 +0000 Felix Wolfsteller Cosmetics.
Tue, 17 Apr 2012 14:20:35 +0000 Felix Wolfsteller Cosmetics.
Tue, 17 Apr 2012 13:56:52 +0000 Felix Wolfsteller Fix issue462 (manualpointseditor npe when doubleclicking).
Tue, 17 Apr 2012 10:21:21 +0000 Raimund Renkert Issue 494.
Fri, 13 Apr 2012 08:21:20 +0000 Raimund Renkert Issue 424.
Thu, 12 Apr 2012 09:49:41 +0000 Raimund Renkert Issue 502.
Wed, 11 Apr 2012 13:24:53 +0000 Raimund Renkert Added missing i18n strings and removed duplicates.
Wed, 11 Apr 2012 11:44:45 +0000 Raimund Renkert Issue 492.
Wed, 11 Apr 2012 08:21:53 +0000 Raimund Renkert Fixed range input for 'W free'.
Thu, 05 Apr 2012 09:01:09 +0000 Raimund Renkert Issue 499.
Wed, 04 Apr 2012 13:31:05 +0000 Ingo Weinzierl Prepared the style editor for WSPLGEN themes.
Wed, 04 Apr 2012 07:20:08 +0000 Ingo Weinzierl Replaced FLYS specific icon set.
Mon, 02 Apr 2012 08:41:09 +0000 Ingo Weinzierl #556 Made GetFeatureInfoWindow modal.
Fri, 30 Mar 2012 06:26:30 +0000 Ingo Weinzierl Take care on nullpointers in the MapToolbar because the info button is not always enabled.
Tue, 20 Mar 2012 14:53:42 +0000 Raimund Renkert Issue 506.
Tue, 20 Mar 2012 12:59:25 +0000 Ingo Weinzierl Added the WQ tables to the helper panel of the WQSimpleArrayPanel.
Tue, 20 Mar 2012 12:57:03 +0000 Ingo Weinzierl Added a new RPC service to fetch gauge information.
Tue, 20 Mar 2012 12:55:27 +0000 Ingo Weinzierl Added new model classes for gauges.
Tue, 20 Mar 2012 12:15:41 +0000 Felix Wolfsteller Disable spinnerbox if theme is disabled.
Tue, 20 Mar 2012 11:59:37 +0000 Felix Wolfsteller Make synchron navigation of CrossSections a per-theme option, not global one.
Tue, 20 Mar 2012 11:08:20 +0000 Felix Wolfsteller i18n and moved reference selectbox for cross section master to top.
Tue, 20 Mar 2012 10:09:14 +0000 Felix Wolfsteller Fix flys/issue462
Tue, 20 Mar 2012 06:55:53 +0000 Ingo Weinzierl #204 Modified i18n strings in WQD table.
Mon, 19 Mar 2012 14:39:46 +0000 Ingo Weinzierl Configured more external WMS services for floodmaps.
Fri, 16 Mar 2012 11:04:35 +0000 Raimund Renkert Issue 493.
Fri, 16 Mar 2012 07:16:58 +0000 Ingo Weinzierl Tagged module 'flys-client' as 'pre2.7-2012-03-16'.
Thu, 15 Mar 2012 15:02:29 +0000 Raimund Renkert Issue 630.
Wed, 14 Mar 2012 15:34:02 +0000 Raimund Renkert Issue 508.
Tue, 13 Mar 2012 17:24:52 +0000 Raimund Renkert Issue 514.
Tue, 13 Mar 2012 15:30:07 +0000 Raimund Renkert Issue 616.
Thu, 08 Mar 2012 15:39:29 +0000 Raimund Renkert Issue 563.
Thu, 08 Mar 2012 15:33:42 +0000 Raimund Renkert Issue 553.
Thu, 08 Mar 2012 13:54:33 +0000 Ingo Weinzierl Added i18n strings used in the floodmaps section of the datacage.
Mon, 05 Mar 2012 14:02:48 +0000 Ingo Weinzierl Deactivate measure control when activating GetFeatureInfo control and reverse.
Mon, 05 Mar 2012 13:55:00 +0000 Ingo Weinzierl Made GetFeatureInfo request available for maps with one layer only.
Mon, 05 Mar 2012 13:30:10 +0000 Ingo Weinzierl Deactivate GetFeatureInfo button if another toggle button is pressed.
Mon, 05 Mar 2012 13:09:46 +0000 Ingo Weinzierl Removed the scrollbar placeholder of the project list.
Mon, 05 Mar 2012 12:56:19 +0000 Ingo Weinzierl Removed the scrollbar gap in the theme panels.
Mon, 05 Mar 2012 11:01:46 +0000 Ingo Weinzierl Added I18N string for digital elevation models.
Fri, 02 Mar 2012 10:53:40 +0000 Felix Wolfsteller Partial fix flys/issue624 (removing cross section).
Fri, 02 Mar 2012 10:26:08 +0000 Felix Wolfsteller Fix issue621 (areas against removed themes).
Thu, 01 Mar 2012 15:33:29 +0000 Ingo Weinzierl #557 Fixed wrong i18n string for tooltip in map controls.
Thu, 01 Mar 2012 15:27:22 +0000 Ingo Weinzierl #558 Reload GetLegendGraphics images when changing the style of a map layer.
Thu, 01 Mar 2012 15:18:33 +0000 Ingo Weinzierl #555 Close existing GetFeatureInfoWindows before creating new ones.
Thu, 01 Mar 2012 15:07:04 +0000 Ingo Weinzierl Query GetFeatureInfo for active layers only.
Thu, 01 Mar 2012 13:24:52 +0000 Ingo Weinzierl Removed the Collection's UUID from CollectionView's title.
Thu, 01 Mar 2012 12:28:35 +0000 Raimund Renkert Issue 572.
Thu, 01 Mar 2012 12:26:34 +0000 Ingo Weinzierl Display better message for empty datacages.
Thu, 01 Mar 2012 12:00:06 +0000 Raimund Renkert Fixed Issue 498.
Thu, 01 Mar 2012 09:47:55 +0000 Felix Wolfsteller fix flys/issue613 . cap max point size.
Fri, 17 Feb 2012 11:04:18 +0000 Raimund Renkert Renamed state data fields for W/Q input.
Fri, 17 Feb 2012 09:41:38 +0000 Ingo Weinzierl #459 Take the current zoom into account for chart exports.
Fri, 17 Feb 2012 09:26:34 +0000 Ingo Weinzierl Removed server url from chart image link.
Fri, 17 Feb 2012 09:25:10 +0000 Ingo Weinzierl Print debug messages for zoom values in ChartOutputServiceIMpl.
Thu, 16 Feb 2012 12:39:11 +0000 Raimund Renkert Refactored the wq input data fields.
Thu, 16 Feb 2012 12:00:47 +0000 Ingo Weinzierl Modified german translation of qps in floodmap datacage.
Fri, 28 Sep 2012 12:14:26 +0200 Thomas Arendsen Hein merged flys-backend/2.6.1 2.6.1
Tue, 14 Feb 2012 16:37:19 +0000 Sascha L. Teichmann flys/issue499: Sort the values of the discharge table by Q.
Fri, 28 Sep 2012 12:14:26 +0200 Thomas Arendsen Hein merged flys-artifacts/2.6.1
Fri, 17 Feb 2012 12:59:56 +0000 Ingo Weinzierl Picked rev 4070,4074,4076,4080 from trunk.
Fri, 17 Feb 2012 11:29:41 +0000 Ingo Weinzierl Picked rev 4058,4063,4065,4068,4069 from trunk.
Thu, 16 Feb 2012 12:35:51 +0000 Ingo Weinzierl Picked rev4061 from trunk.
Thu, 16 Feb 2012 11:54:10 +0000 Felix Wolfsteller Fix flys/issue150 ('water increasing').
Thu, 16 Feb 2012 06:47:46 +0000 Ingo Weinzierl Fixed broken HYKs in crosssection charts for river Mosel.
Tue, 14 Feb 2012 16:48:13 +0000 Sascha L. Teichmann Another partial fix for flys/issue499: Do the W to Q conversions
Tue, 14 Feb 2012 09:02:51 +0000 Felix Wolfsteller Added accidentally ommitted ChangeLog entry.
Tue, 14 Feb 2012 09:00:50 +0000 Felix Wolfsteller Partial Fix flys/issue500: text-orientation for texts.
Mon, 13 Feb 2012 17:49:04 +0000 Sascha L. Teichmann Partial fix for flys/issue499
Mon, 13 Feb 2012 17:48:14 +0000 Sascha L. Teichmann Make it compileable again
Mon, 13 Feb 2012 16:43:40 +0000 Felix Wolfsteller Partial Fix flys/issue500: Text-background for manual points.
Mon, 13 Feb 2012 15:31:17 +0000 Felix Wolfsteller Partial fix flys/issue500 (text bg of some annotations).
Mon, 13 Feb 2012 14:41:45 +0000 Felix Wolfsteller Fix flys/issue490 (text for manual points).
Fri, 10 Feb 2012 17:28:28 +0000 Sascha L. Teichmann 'Reduzierte Bezugslinien' make the code more self explaining.
Fri, 10 Feb 2012 16:33:36 +0000 Ingo Weinzierl Bugfix: Take care on empty ArtifactAndFacet objects in doAnnotations().
Fri, 10 Feb 2012 16:25:27 +0000 Sascha L. Teichmann 'Bezugslinien': normalized reference curve is now derived from reference curve.
Fri, 10 Feb 2012 16:00:57 +0000 Sascha L. Teichmann 'Bezugslinien': Added axis labels matching the displayed data.
Fri, 10 Feb 2012 14:04:07 +0000 Ingo Weinzierl Fixed broken PDF export for historical discharge curves.
Fri, 10 Feb 2012 12:41:12 +0000 Felix Wolfsteller Towards fixe of flys/issue495.
Fri, 10 Feb 2012 12:09:36 +0000 Sascha L. Teichmann 'Bezugslinienverfahren': Fix the index bug.
Fri, 10 Feb 2012 11:28:43 +0000 Sascha L. Teichmann 'Bezugslinienverfahren': Improve the error messages even more.
Fri, 10 Feb 2012 11:21:35 +0000 Sascha L. Teichmann 'Bezugslinienverfahren': Forget to put new created WWAxisType onto blackboard.
Fri, 10 Feb 2012 11:02:23 +0000 Felix Wolfsteller Adjust linear function offset.
Fri, 10 Feb 2012 10:45:32 +0000 Ingo Weinzierl Enabled zooming for timeseries charts.
Fri, 10 Feb 2012 10:43:29 +0000 Ingo Weinzierl Improved the interface and implementations of Bounds.
Fri, 10 Feb 2012 10:24:33 +0000 Ingo Weinzierl New abstract methods in ChartGenerator and moved a method from ChartGenerator to XYChartGenerator.
Fri, 10 Feb 2012 10:20:02 +0000 Ingo Weinzierl Small improvements in model classes for Bounds.
Fri, 10 Feb 2012 10:12:12 +0000 Sascha L. Teichmann Give more precise message when an error occurs in W~W relation.
Fri, 10 Feb 2012 08:56:19 +0000 Ingo Weinzierl Some API changes in ChartGenerator and XYChartGenerator for fetching user specified zoom values.
Fri, 10 Feb 2012 08:43:06 +0000 Ingo Weinzierl Added chart helper function to determine the min and max bounds (x and y) for TimeSeriesCollections.
Fri, 10 Feb 2012 08:41:07 +0000 Ingo Weinzierl Removed useless imports.
Fri, 17 Feb 2012 12:58:38 +0000 Ingo Weinzierl Picked rev4066,4075 from trunk.
Fri, 17 Feb 2012 11:33:03 +0000 Ingo Weinzierl Picked rev 4059,4071,4072,4073 from trunk.
Thu, 16 Feb 2012 12:02:46 +0000 Ingo Weinzierl Tagged trunk of module flys-client as 2.6.1
Tue, 14 Feb 2012 16:33:26 +0000 Sascha L. Teichmann flys/issue499: Deactivate validation for 'W am Pegel'
Mon, 13 Feb 2012 18:00:48 +0000 Sascha L. Teichmann Another partial fix/workaround for flys/issue499.
Mon, 13 Feb 2012 16:14:37 +0000 Sascha L. Teichmann Client side fix for flys/issue499. There is an server issue, too.
Fri, 28 Sep 2012 12:14:23 +0200 Thomas Arendsen Hein merged flys-backend/2.6 2.6
Thu, 09 Feb 2012 11:30:26 +0000 Ingo Weinzierl Added a method Gauge.fetchMasterDischargeTable() to retrieve the discharge table with kind = 0.
Mon, 06 Feb 2012 07:36:51 +0000 Felix Wolfsteller River: (fix) Renamed function which is not a getter.
Fri, 03 Feb 2012 15:25:18 +0000 Sascha L. Teichmann Added a method to build a map from gauge stations to the datums of the gauges.
Thu, 19 Jan 2012 13:36:06 +0000 Sascha L. Teichmann Added meachnism to backend to fetch all annotation related data in one go.
Wed, 18 Jan 2012 09:26:54 +0000 Ingo Weinzierl Added a function Gauge.getGaugeByOfficialNumber() that returns a Gauge based on its official number.
Tue, 17 Jan 2012 16:56:38 +0000 Sascha L. Teichmann Create fast cross section lines in the backend now.
Mon, 16 Jan 2012 14:52:40 +0000 Sascha L. Teichmann CrossSection: Added method to extract the lines of a given km range.
Mon, 16 Jan 2012 14:16:52 +0000 Sascha L. Teichmann CrossSectionLine: Simplified creation of Point2Ds.
Tue, 10 Jan 2012 10:33:14 +0000 Sascha L. Teichmann Make parsing of official numbers out of STA files being enabled with new system property.
Thu, 05 Jan 2012 15:00:21 +0000 Sascha L. Teichmann backend: Fixed spatial table hws.
Thu, 05 Jan 2012 10:42:20 +0000 Ingo Weinzierl Modified the signature of RiverAxis.getRiverAxis() which now returns a list of RiverAxis objects instead of a single instance.
Tue, 03 Jan 2012 10:10:56 +0000 Ingo Weinzierl Added a new method Wst.determineMinMaxQFree() to determine the min/max Qs at a given kilometer.
Mon, 02 Jan 2012 13:42:27 +0000 Sascha L. Teichmann Removed "NOT NULL" constraint from gauges.range_id because there are gauges which dont have a Gueltigkeitsbereich.
Wed, 28 Dec 2011 12:16:52 +0000 Ingo Weinzierl Added a new method Wst.determineMinMaxQ(double,double).
Mon, 19 Dec 2011 11:21:25 +0000 Sascha L. Teichmann Added support for official gauge numbers.
Wed, 30 Nov 2011 12:14:41 +0000 Bjoern Schilberg doc/schema/oracle-spatial.sql: Adjust extent of germany to EPSG:31467 (GK3) coordinates.
Wed, 30 Nov 2011 11:23:23 +0000 Bjoern Schilberg doc/schema/oracle-spatial.sql: Adjusted extent to the extent of germany and srs to 31467 in USER_SDO_GEOM_METADATA.
Tue, 29 Nov 2011 15:31:18 +0000 Bjoern Schilberg Fixed oracle_create_user.sql script: Fixed notation of the table in the alter statement.
Fri, 18 Nov 2011 15:53:07 +0000 Sascha L. Teichmann Fixed flys/issue415: Increased precision of a and b in ranges.
Thu, 10 Nov 2011 13:58:33 +0000 Ingo Weinzierl Added functions that return lists of Buildings/Fixpoints to according classes.
Thu, 10 Nov 2011 13:35:31 +0000 Ingo Weinzierl Adapted 'lines' relation and made lines queryable for a given river.
Wed, 09 Nov 2011 16:25:20 +0000 Ingo Weinzierl Added and registered a model Catchment for 'catchment' relation.
Wed, 09 Nov 2011 16:01:16 +0000 Ingo Weinzierl Added model for 'hws' relation and synced postgis with oracle spatial schema.
Wed, 09 Nov 2011 14:59:01 +0000 Ingo Weinzierl Added some functions that return information about the db connection used by the current database session.
Wed, 09 Nov 2011 10:31:08 +0000 Ingo Weinzierl Made flys-backend compatible with oracle spatial.
Tue, 01 Nov 2011 15:30:38 +0000 Ingo Weinzierl Added model class for relation 'river_axes_km'.
Tue, 25 Oct 2011 15:19:56 +0000 Bjoern Schilberg Added explizit TABLESPACE definition for the user.
Tue, 25 Oct 2011 06:52:32 +0000 Bjoern Schilberg Adjusted oracle_create_user.sql script. Added USER SQL snippet to change tablespace to users.
Mon, 24 Oct 2011 16:48:21 +0000 Sascha L. Teichmann Added date guesser for WST columns.
Mon, 24 Oct 2011 12:33:05 +0000 Bjoern Schilberg Adjusted geometry type for floodplain and hws in AddGeometryColumn.
Wed, 19 Oct 2011 09:46:19 +0000 Bjoern Schilberg Added missing views (wst_value_table,wst_w_values,wst_q_values).
Tue, 18 Oct 2011 10:25:00 +0000 Bjoern Schilberg Removed all CREATE OR REPLACE TRIGGER statements.
Mon, 17 Oct 2011 12:10:12 +0000 Bjoern Schilberg Adjusted NUMBER format for units, positions and cross_section_points tables.
Tue, 11 Oct 2011 07:29:53 +0000 Bjoern Schilberg Fixed errors.
Mon, 10 Oct 2011 16:20:17 +0000 Bjoern Schilberg Adjust oracle schema [I382]
Mon, 10 Oct 2011 12:21:50 +0000 Felix Wolfsteller Removed obsolete imports.
Wed, 05 Oct 2011 09:03:58 +0000 Sascha L. Teichmann units table: Added update statements for existing databases
Wed, 05 Oct 2011 08:33:25 +0000 Ingo Weinzierl Added a schema dump shell script.
Tue, 04 Oct 2011 15:28:19 +0000 Ingo Weinzierl Removed the Unit from Wsts - added a WstUnit column to rivers.
Tue, 04 Oct 2011 06:47:00 +0000 Ingo Weinzierl Added db table, model class and importer stuff for units.
Tue, 04 Oct 2011 05:06:10 +0000 Ingo Weinzierl Bugfix: #333 Improved determination of reference gauge based on start km.
Wed, 28 Sep 2011 15:35:54 +0000 Felix Wolfsteller Extracted StringUtil.wWrap method from WaterlevelSelectState .
Wed, 28 Sep 2011 08:17:16 +0000 Felix Wolfsteller Added 'unbracket' StringUtil method (extracted from WaterlevelSelectState).
Tue, 27 Sep 2011 13:37:34 +0000 Sascha L. Teichmann CrossSectionLine: Moved some logic from cross section demo app to this model.
Mon, 26 Sep 2011 15:26:44 +0000 Ingo Weinzierl Added function to retrieve nearest CrossSectionTrack to a given kilometer.
Fri, 23 Sep 2011 11:15:20 +0000 Bjoern Schilberg Added missing schemas.
Fri, 23 Sep 2011 10:42:25 +0000 Bjoern Schilberg Harmonized oracle and postgresql spatial schema.
Thu, 22 Sep 2011 12:10:08 +0000 Bjoern Schilberg Harmonized Extent for Saar and Mosel. Some cleanups.
Thu, 22 Sep 2011 11:20:15 +0000 Ingo Weinzierl Added code and a system property 'flys.backend.enablejmx=true' to enable JMX support for hibernate.
Wed, 21 Sep 2011 10:12:00 +0000 Bjoern Schilberg Added right to create views.
Tue, 20 Sep 2011 13:21:29 +0000 Bjoern Schilberg Generalized oracle spatial schema.
Mon, 19 Sep 2011 14:33:40 +0000 Ingo Weinzierl Tagged RELEASE 2.5 of flys-backend.
Fri, 28 Sep 2012 12:14:23 +0200 Thomas Arendsen Hein merged flys-artifacts/2.6
Fri, 10 Feb 2012 16:42:41 +0000 Ingo Weinzierl Picked rev4038 from trunk to stop Annotations break chart rendering.
Fri, 10 Feb 2012 14:07:03 +0000 Ingo Weinzierl Picked rev4034 from trunk.
Fri, 10 Feb 2012 11:18:27 +0000 Ingo Weinzierl Picked changes r4015:4026 from trunk.
Fri, 10 Feb 2012 08:28:17 +0000 Felix Wolfsteller Add W(cm) column to csv export of reference curves.
Thu, 09 Feb 2012 22:03:07 +0000 Ingo Weinzierl Added standalone demo application that prints all layers of a WMS to file.
Thu, 09 Feb 2012 18:38:03 +0000 Ingo Weinzierl Added new model classes that should be used for axes range adaption later.
Thu, 09 Feb 2012 17:28:31 +0000 Sascha L. Teichmann 'Bezugslinienverfahren': Generate valid i18n names for datasets.
Thu, 09 Feb 2012 15:59:49 +0000 Ingo Weinzierl #485 Fixed broken renaming of chart themes.
Thu, 09 Feb 2012 15:48:13 +0000 Felix Wolfsteller Changed dashes in entitie names to underscores.
Thu, 09 Feb 2012 14:51:50 +0000 Sascha L. Teichmann Fixed problems with incluing zeros in reference curves.
Thu, 09 Feb 2012 14:37:51 +0000 Felix Wolfsteller Allow manual points in new charts.
Thu, 09 Feb 2012 14:27:47 +0000 Ingo Weinzierl Enabled styling in timeseries charts.
Thu, 09 Feb 2012 14:26:03 +0000 Sascha L. Teichmann ChangeLog: forget to commit
Thu, 09 Feb 2012 14:24:27 +0000 Felix Wolfsteller Added area facet to compatibility list of new charts longitudinal section output.
Thu, 09 Feb 2012 13:45:26 +0000 Felix Wolfsteller Avoid that annotations like the ones used for hyks prevent manual point text annotation rendering.
Thu, 09 Feb 2012 13:28:57 +0000 Ingo Weinzierl Added themes for discharge curves and difference curves in historical discharge curve charts.
Thu, 09 Feb 2012 12:13:28 +0000 Sascha L. Teichmann Be more conservative about arrays and indices in "Bezugslinienverfahren".
Thu, 09 Feb 2012 11:47:25 +0000 Ingo Weinzierl Some bugfixes and improvements in the calculation of historical discharge curves.
Thu, 09 Feb 2012 11:33:47 +0000 Felix Wolfsteller Fix call to StringUtils.join .
Thu, 09 Feb 2012 11:00:27 +0000 Felix Wolfsteller Added i18n string for waterlevels.
Thu, 09 Feb 2012 10:59:38 +0000 Felix Wolfsteller Format multiple double values with a locale.
Thu, 09 Feb 2012 10:57:35 +0000 Ingo Weinzierl Compute differences between discharge table values and reference discharge table values in historical discharge curve calculation.
Thu, 09 Feb 2012 10:21:16 +0000 Raimund Renkert Added PDF export to reference curve calculation.
Thu, 09 Feb 2012 10:08:14 +0000 Sascha L. Teichmann Prevent duplicates in end kms for reference curve calculation.
Thu, 09 Feb 2012 08:40:39 +0000 Felix Wolfsteller Renamed data item names to allow translations.
Wed, 08 Feb 2012 16:51:15 +0000 Felix Wolfsteller Better description for reference curve facets (seen in client).
Wed, 08 Feb 2012 16:12:15 +0000 Felix Wolfsteller Prepare new data input for reference curves 'Ziel' locations.
Wed, 08 Feb 2012 15:51:25 +0000 Sascha L. Teichmann Error report: Format kms in error reports at least with one digit after the decimal separator.
Wed, 08 Feb 2012 15:50:25 +0000 Ingo Weinzierl #483 Display error message in calculation report for empty historical discharge calculations.
Wed, 08 Feb 2012 15:31:24 +0000 Sascha L. Teichmann Fix flys/issue468 (Fehler beim Projekt-Duplizieren)
Wed, 08 Feb 2012 14:45:53 +0000 Felix Wolfsteller Handle manual points in discharge curve generator.
Wed, 08 Feb 2012 14:37:35 +0000 Felix Wolfsteller Repair area over cross sections.
Wed, 08 Feb 2012 11:47:14 +0000 Ingo Weinzierl Put line and text annotations placed at x and y axes into foreground.
Wed, 08 Feb 2012 11:32:07 +0000 Felix Wolfsteller fix flys/issue474 (manual points in reference curves).
Wed, 08 Feb 2012 11:16:39 +0000 Felix Wolfsteller Partial fix issue474, i18n.
Wed, 08 Feb 2012 11:04:27 +0000 Felix Wolfsteller Register style for reference_curve_normalized.
Wed, 08 Feb 2012 10:54:23 +0000 Ingo Weinzierl Be more merciful for building the URL for the user-wms.
Wed, 08 Feb 2012 10:26:21 +0000 Felix Wolfsteller Fix flys/issue472. (discharge_curve manualpoints)
Wed, 08 Feb 2012 10:09:34 +0000 Sascha L. Teichmann Fix flys/issue484
Wed, 08 Feb 2012 10:02:43 +0000 Felix Wolfsteller Map themes to manualpoint themes.
Wed, 08 Feb 2012 09:52:52 +0000 Felix Wolfsteller Configuration for manualpoints for cross sections.
Wed, 08 Feb 2012 09:35:07 +0000 Felix Wolfsteller Commented styling option for show area until area calculation does work.
Wed, 08 Feb 2012 09:33:06 +0000 Sascha L. Teichmann Calculation error report: i18n the km of the error report.
Tue, 07 Feb 2012 18:12:08 +0000 Ingo Weinzierl Small bugfix for fetching river annotations.
Tue, 07 Feb 2012 14:38:42 +0000 Sascha L. Teichmann Added missing config of chart info generator
Tue, 07 Feb 2012 13:26:18 +0000 Ingo Weinzierl Fixed wrong name of chartinfo generator for historical discharge curves.
Tue, 07 Feb 2012 10:29:39 +0000 Raimund Renkert Added PDF export for historical discharge curve calculations.
Tue, 07 Feb 2012 09:58:15 +0000 Felix Wolfsteller Improved CSV export of reference curves, include Qs.
Tue, 07 Feb 2012 09:54:29 +0000 Felix Wolfsteller Refactored Formatter access to ease reuse.
Tue, 07 Feb 2012 09:52:55 +0000 Felix Wolfsteller Let reference curve calculation result in wwqq.
Tue, 07 Feb 2012 08:28:22 +0000 Felix Wolfsteller Log error as warning.
Mon, 06 Feb 2012 17:40:36 +0000 Sascha L. Teichmann "Bezugslinienverfahren": Do normalisation of reference curves.
Mon, 06 Feb 2012 16:35:55 +0000 Sascha L. Teichmann "Bezugslinienverfahren": Added missing chart info generator.
Mon, 06 Feb 2012 16:12:48 +0000 Felix Wolfsteller Fix i18n
Mon, 06 Feb 2012 15:57:31 +0000 Sascha L. Teichmann "Bezugslinienverfahren": Fetch axis types from call context.
Mon, 06 Feb 2012 15:42:27 +0000 Sascha L. Teichmann Added generator for "Reduzierte Bezugslinie".
Mon, 06 Feb 2012 15:37:54 +0000 Raimund Renkert Added service for discharge infos at a specific gauge.
Mon, 06 Feb 2012 15:18:15 +0000 Sascha L. Teichmann Added config for "reduzierte Bezugslinie".
Mon, 06 Feb 2012 14:58:29 +0000 Sascha L. Teichmann Added error to winfo.xml report.
Mon, 06 Feb 2012 14:37:30 +0000 Ingo Weinzierl Set proper bounds for date axes in the chart info document; tell the transformation matrix which type it is (date/number).
Mon, 06 Feb 2012 14:22:26 +0000 Felix Wolfsteller Extend reference curve export to include km location as string.
Mon, 06 Feb 2012 14:21:02 +0000 Sascha L. Teichmann "Bezugslinienverfahren": Store Qs of calculation, too.
Mon, 06 Feb 2012 14:02:04 +0000 Felix Wolfsteller Win fight against svn, added further i18n and slightly more data in reference-curve/csv export.
Mon, 06 Feb 2012 14:00:27 +0000 Felix Wolfsteller Added more i18n stubs and slightly more data to csv export of reference curves.
Mon, 06 Feb 2012 13:59:28 +0000 Felix Wolfsteller Added a second Y axis for ReferenceCurveGenerator.q
Mon, 06 Feb 2012 13:53:49 +0000 Sascha L. Teichmann Return the Qs from the "Bezugslinienverfahren, too."
Mon, 06 Feb 2012 13:20:00 +0000 Felix Wolfsteller Added a second Y axis for ReferenceCurveGenerator.
Mon, 06 Feb 2012 13:09:05 +0000 Felix Wolfsteller Added accidentally ommitted ChangeLog.
Mon, 06 Feb 2012 13:07:19 +0000 Felix Wolfsteller Primitive, incomplete CSV export for reference curves.
Mon, 06 Feb 2012 13:04:52 +0000 Felix Wolfsteller Minor i18n for reference curve chart added.
Mon, 06 Feb 2012 11:14:57 +0000 Ingo Weinzierl Added missing HistoricalDischargeCurveInfoGenerator class.
Mon, 06 Feb 2012 11:14:33 +0000 Ingo Weinzierl Registered an Info generator for historical discharge curves; made some adaptions in XYChartGenerator, ChartGenerator and TimeseriesChartGenerator.
Mon, 06 Feb 2012 10:17:29 +0000 Felix Wolfsteller Cosmetics.
Mon, 06 Feb 2012 10:15:41 +0000 Felix Wolfsteller Add a not-yet-looked-at CSV facet for Reference Curve.
Mon, 06 Feb 2012 08:36:26 +0000 Ingo Weinzierl Added a CSV export for historical discharge curves.
Mon, 06 Feb 2012 07:39:59 +0000 Felix Wolfsteller Adjusted to name change in River class (hibernate fix).
Fri, 03 Feb 2012 18:03:26 +0000 Sascha L. Teichmann First steps to serve the data in cm if we are are gauges only.
Fri, 03 Feb 2012 15:22:56 +0000 Ingo Weinzierl W/Q input values in historical discharge curves may now by from type double.
Fri, 03 Feb 2012 14:57:10 +0000 Sascha L. Teichmann Removed superfluous imports.
Fri, 03 Feb 2012 14:53:11 +0000 Sascha L. Teichmann Dont sort the data series in reference curve.
Fri, 03 Feb 2012 13:51:08 +0000 Felix Wolfsteller Removed obsolete ReferenceCurveInputState.
Fri, 03 Feb 2012 13:49:16 +0000 Felix Wolfsteller Improved reference curve.
Fri, 03 Feb 2012 13:46:03 +0000 Ingo Weinzierl Bugfix: create a report facet for historical discharge curves even if no data has been computed.
Fri, 03 Feb 2012 13:42:48 +0000 Ingo Weinzierl Create title, subtitle and axes labels for charts from type historical discharge curve.
Fri, 03 Feb 2012 13:33:58 +0000 Felix Wolfsteller Fix.
Fri, 03 Feb 2012 13:06:23 +0000 Felix Wolfsteller Added i18n.
Fri, 03 Feb 2012 13:05:25 +0000 Felix Wolfsteller Doc added and fix getAxisWalker-issue.
Fri, 03 Feb 2012 12:16:59 +0000 Sascha L. Teichmann Use the ApplyFunctionIterator in reference curve generation.
Fri, 03 Feb 2012 11:45:22 +0000 Ingo Weinzierl Added an error report for historical discharge curves.
Fri, 03 Feb 2012 10:45:12 +0000 Ingo Weinzierl Improved chart creation for historical discharge curves.
Fri, 03 Feb 2012 09:39:22 +0000 Ingo Weinzierl Further refactoring of XYChartGenerator / ChartGenerator with the result, that timerange charts are now able to display lines.
Fri, 03 Feb 2012 09:35:46 +0000 Ingo Weinzierl New helper functions in ChartHelper and improvements in EnhancedLineAndShapeRenderer.
Thu, 02 Feb 2012 16:39:50 +0000 Ingo Weinzierl The HistoricalDischargeCurveGenerator now creates new AxisDataset objects and new TimeSeriesCollections for each Facet.
Thu, 02 Feb 2012 16:38:12 +0000 Ingo Weinzierl Improved WQTimerange and HistoricalDischargeFacet.
Thu, 02 Feb 2012 15:44:13 +0000 Ingo Weinzierl Some more refactoring in XYChartGenerator and ChartGenerator; implemented necessary stuff in TimeseriesChartGenerator and return new empty instances of timeseries charts.
Thu, 02 Feb 2012 15:39:28 +0000 Ingo Weinzierl Added a ChartHelper class that currently contains a method to compute the xy ranges of an XYDataset.
Thu, 02 Feb 2012 14:00:40 +0000 Ingo Weinzierl Refactoring: moved more base code from XYChartGenerator into its parent class ChartGenerator
Thu, 02 Feb 2012 13:23:55 +0000 Felix Wolfsteller Cosmetics/care/refac.
Thu, 02 Feb 2012 12:50:33 +0000 Ingo Weinzierl Refactoring: moved more base code from XYChartGenerator into its parent class ChartGenerator.
Thu, 02 Feb 2012 12:26:36 +0000 Ingo Weinzierl Added a new ChartGenerator for timeseries charts and refactored some code in XYChartGenerator.
Thu, 02 Feb 2012 11:57:38 +0000 Ingo Weinzierl Added demo standalone app for evaluating different timeseries charts.
Thu, 02 Feb 2012 10:54:21 +0000 Raimund Renkert Issue 466.
Wed, 01 Feb 2012 15:41:11 +0000 Ingo Weinzierl Improved the 'historical discharge' calculation: implemented findValueForW().
Wed, 01 Feb 2012 15:00:13 +0000 Felix Wolfsteller Add some fake 'input' data for reference curve. plot references curves from input km to input km +2.
Wed, 01 Feb 2012 14:48:00 +0000 Ingo Weinzierl Implemented the first step of Calculation6; create Facets for each calculation results.
Wed, 01 Feb 2012 14:43:50 +0000 Ingo Weinzierl Added a new constructor to Timerange that takes Date objects for start and end.
Wed, 01 Feb 2012 14:07:38 +0000 Sascha L. Teichmann W: Forget to create ws data in constructor.
Wed, 01 Feb 2012 14:01:46 +0000 Felix Wolfsteller Did some modifications for debugging purposes, added output to reference-curve-state.
Wed, 01 Feb 2012 13:59:52 +0000 Felix Wolfsteller Register ReferenceCurve-Generators.
Wed, 01 Feb 2012 13:58:50 +0000 Felix Wolfsteller Cosmetics.
Wed, 01 Feb 2012 13:58:09 +0000 Felix Wolfsteller Add more-or-less dummy Facet in ReferenceCurveState.
Wed, 01 Feb 2012 13:57:15 +0000 Felix Wolfsteller Cosmetics.
Wed, 01 Feb 2012 13:56:38 +0000 Felix Wolfsteller Added reference curve facet type.
Wed, 01 Feb 2012 13:33:58 +0000 Ingo Weinzierl Fetch parameters for 'historical discharge curve' calculation; call Calculation6 with those information and check input parameters.
Wed, 01 Feb 2012 13:32:10 +0000 Felix Wolfsteller Addes stub for ReferenceCurve*Generator
Wed, 01 Feb 2012 12:24:05 +0000 Ingo Weinzierl Added new model classes which will be used during historical discharge curve calculation.
Wed, 01 Feb 2012 12:21:05 +0000 Ingo Weinzierl Added new helper methods to FLYSUtils that extract int[] and double[] from string.
Wed, 01 Feb 2012 11:14:24 +0000 Ingo Weinzierl Added new classes and stubs used to calculate data for historical discharge curve charts.
Wed, 01 Feb 2012 11:07:22 +0000 Ingo Weinzierl Removed needless imports.
Wed, 01 Feb 2012 09:23:44 +0000 Felix Wolfsteller Changed wording.
Wed, 01 Feb 2012 08:37:38 +0000 Felix Wolfsteller Avoid running into an NPE, but add warning to ease forensic.
Tue, 31 Jan 2012 16:26:30 +0000 Sascha L. Teichmann Fixed problems with unformatted numbers in error message.
Tue, 31 Jan 2012 15:43:38 +0000 Ingo Weinzierl Override getLabelFor() in HistoricalDischargeState to return an I18N string for the selected evaluation mode.
Tue, 31 Jan 2012 15:14:54 +0000 Ingo Weinzierl Modified some data types in the 'historical discharge curves' transitions.
Mon, 30 Jan 2012 14:16:03 +0000 Felix Wolfsteller Fix wrong transition type towards w_diff.
Mon, 30 Jan 2012 13:36:36 +0000 Ingo Weinzierl Display the name of the reference gauge in the static ui of 'historical discharge curves' calculation.
Mon, 30 Jan 2012 13:33:18 +0000 Felix Wolfsteller Add manual point handling for many different chart types.
Mon, 30 Jan 2012 13:29:07 +0000 Ingo Weinzierl Format the timerange (static ui) inserted in the 'historical discharge curves' calculation.
Mon, 30 Jan 2012 13:23:40 +0000 Ingo Weinzierl Bugfix: use correct order of parameters to call DefaultStateData constructor.
Mon, 30 Jan 2012 10:54:38 +0000 Ingo Weinzierl Fixed a bug in the winfo transitions.
Mon, 30 Jan 2012 10:08:25 +0000 Ingo Weinzierl Added default values for min and max items prepared by MinMaxState.
Mon, 30 Jan 2012 09:57:59 +0000 Sascha L. Teichmann "Bezugslinienverfahren": Add start and end km to WW to determine if kms are at gauges.
Mon, 30 Jan 2012 09:03:12 +0000 Ingo Weinzierl Added transitions for 'historical discharge curves' calculation.
Mon, 30 Jan 2012 08:37:01 +0000 Felix Wolfsteller Skip 'inactive' points in output generation.
Sat, 28 Jan 2012 12:50:03 +0000 Sascha L. Teichmann "Bezugslinienverfahren": Replaced normalized curve generation with a better and needed solution.
Fri, 27 Jan 2012 17:59:24 +0000 Sascha L. Teichmann "Bezugslinienverfahren": Implemented the on-the-flys shift to (0, 0).
Fri, 27 Jan 2012 17:45:26 +0000 Sascha L. Teichmann "Bezugslinienverfahren": Added facet classes.
Fri, 27 Jan 2012 17:17:45 +0000 Sascha L. Teichmann "Bezugslinenverfahren": Added stub loop for creating facets.
Fri, 27 Jan 2012 15:43:04 +0000 Sascha L. Teichmann Call the "Bezugslinienverfahren" from the WINFOArtifact.
Fri, 27 Jan 2012 14:21:51 +0000 Felix Wolfsteller Manual Point Theming improved.
Fri, 27 Jan 2012 14:19:22 +0000 Sascha L. Teichmann 'Bezugslinienverfahren': Fixed stupid bug.
Fri, 27 Jan 2012 13:26:04 +0000 Ingo Weinzierl Added states (work is not finished yet) for the 'historical discharge curve' calculation.
Fri, 27 Jan 2012 13:23:56 +0000 Ingo Weinzierl Introduced an abstract MinMaxState and a concrete class IntRangeState to add min/max value pairs.
Fri, 27 Jan 2012 13:18:37 +0000 Ingo Weinzierl Refactored some code in DefaultState to better override the base class.
Fri, 27 Jan 2012 13:12:31 +0000 Ingo Weinzierl Removed useless import.
Fri, 27 Jan 2012 13:09:50 +0000 Ingo Weinzierl Added strings used in the calculation 'historical discharge curves'.
Fri, 27 Jan 2012 12:42:20 +0000 Sascha L. Teichmann Added calculation class for "Bezugslinienverfahren" to created by WINFOArtifact.
Fri, 27 Jan 2012 11:58:35 +0000 Raimund Renkert Added i18n support to PDF report export.
Fri, 27 Jan 2012 11:19:16 +0000 Felix Wolfsteller Only add one legend item for manual point themes.
Fri, 27 Jan 2012 11:01:13 +0000 Felix Wolfsteller Render labels of manual points in a very primitive manner.
Fri, 27 Jan 2012 10:45:34 +0000 Sascha L. Teichmann Refactored class hierachy to integrate model for W~W.
Fri, 27 Jan 2012 10:32:09 +0000 Felix Wolfsteller i18n for ManualPointsFacets.
Fri, 27 Jan 2012 09:49:11 +0000 Raimund Renkert Issue 138.
Fri, 27 Jan 2012 09:42:15 +0000 Raimund Renkert Added method that return the differences for a w-differences calculation as
Fri, 27 Jan 2012 07:53:03 +0000 Raimund Renkert Issue 138.
Thu, 26 Jan 2012 16:53:42 +0000 Raimund Renkert Issue 138.
Thu, 26 Jan 2012 15:38:46 +0000 Raimund Renkert Issue 138.
Thu, 26 Jan 2012 13:12:19 +0000 Felix Wolfsteller Render manual points in longitudinal sections.
Thu, 26 Jan 2012 12:56:57 +0000 Felix Wolfsteller Added acidentally ommitted ChangeLog entries.
Thu, 26 Jan 2012 12:55:53 +0000 Felix Wolfsteller Cosmetics.
Thu, 26 Jan 2012 12:52:44 +0000 Felix Wolfsteller New, basic infrastructure for user-provided data ('manual points').
Wed, 25 Jan 2012 15:12:07 +0000 Sascha L. Teichmann Transition/States: Removed superfluous condition checks.
Wed, 25 Jan 2012 14:14:33 +0000 Sascha L. Teichmann Added transition/state stubs for "Bezugslinienverfahren".
Wed, 25 Jan 2012 12:58:26 +0000 Felix Wolfsteller Cosmetics.
Wed, 25 Jan 2012 10:52:58 +0000 Sascha L. Teichmann visualize-transitions.xsl: Fixed output of conditions.
Wed, 25 Jan 2012 10:19:30 +0000 Raimund Renkert Issue 461.
Tue, 24 Jan 2012 22:59:44 +0000 Sascha L. Teichmann I18N for WINFO calculation result messages.
Mon, 23 Jan 2012 17:39:51 +0000 Sascha L. Teichmann Handle the case in "W auf freier Strecke" where more than ne Q is related to a W.
Mon, 23 Jan 2012 16:55:42 +0000 Sascha L. Teichmann Added code for the simple case of "Bezugslinienverfahren" ("W auf freier Strecke").
Mon, 23 Jan 2012 14:18:53 +0000 Felix Wolfsteller Theoretically allow annotations on second y ais. Practically allow Q MainValues on Q Axis in Duration Curves.
Mon, 23 Jan 2012 11:06:06 +0000 Felix Wolfsteller Fix compilation, use StickyAxisAnnotations in AnnotationFacet.
Mon, 23 Jan 2012 10:44:34 +0000 Felix Wolfsteller Somewhat unified Annotation handling, use jfreechart-house-toolkit instead of custom StickyAxisAnnotation.
Mon, 23 Jan 2012 07:55:17 +0000 Felix Wolfsteller Employ ChartRenderingInfo when creating svg/pdf exports.
Fri, 20 Jan 2012 16:24:39 +0000 Raimund Renkert Added short subtitle for longitudinal section chart.
Fri, 20 Jan 2012 16:22:00 +0000 Raimund Renkert Removed state validation.
Fri, 20 Jan 2012 13:20:37 +0000 Felix Wolfsteller Added new Annotation class that prevents collisions (to replace StickyAxisAnnotation).
Fri, 20 Jan 2012 10:23:27 +0000 Felix Wolfsteller Made StyledSeriesBuilder more robust.
Fri, 20 Jan 2012 09:38:43 +0000 Felix Wolfsteller Respect rivers flow direction when looking for hyk-formations.
Fri, 20 Jan 2012 09:18:56 +0000 Raimund Renkert Use waterlevel state and longitudinal section generator for longitudinal
Fri, 20 Jan 2012 09:14:53 +0000 Raimund Renkert 'New chart' for cross sections.
Fri, 20 Jan 2012 08:38:50 +0000 Felix Wolfsteller Add basic (text) styling for HYKS.
Fri, 20 Jan 2012 08:35:03 +0000 Felix Wolfsteller Cleanups.
Fri, 20 Jan 2012 08:31:25 +0000 Felix Wolfsteller Cosmetics.
Fri, 20 Jan 2012 08:30:50 +0000 Felix Wolfsteller Added cache definition for hyks.
Fri, 20 Jan 2012 08:30:07 +0000 Felix Wolfsteller Made HYKFactory.Zone Serializable (and thus cachable).
Fri, 20 Jan 2012 08:29:24 +0000 Felix Wolfsteller Cosmetics.
Fri, 20 Jan 2012 08:28:46 +0000 Felix Wolfsteller Added style for hyks.
Thu, 19 Jan 2012 15:43:57 +0000 Sascha L. Teichmann DistanceInfoService now uses annotations from LocationProvider.
Thu, 19 Jan 2012 13:43:58 +0000 Sascha L. Teichmann Use FastAnnotations for LocationProvider.
Thu, 19 Jan 2012 13:09:00 +0000 Felix Wolfsteller Minor hyk-handling improvements.
Thu, 19 Jan 2012 13:01:55 +0000 Felix Wolfsteller Cosmetics.
Thu, 19 Jan 2012 13:01:33 +0000 Felix Wolfsteller Cosmetics.
Thu, 19 Jan 2012 12:59:36 +0000 Felix Wolfsteller Recommend hyks if hit by cross section out.
Thu, 19 Jan 2012 12:52:44 +0000 Felix Wolfsteller Somewhat improved hyk handling and rendering.
Thu, 19 Jan 2012 11:00:27 +0000 Felix Wolfsteller Improved HYK/Zones- handling.
Thu, 19 Jan 2012 10:51:20 +0000 Felix Wolfsteller Prepare improved hyk-handling.
Wed, 18 Jan 2012 16:54:09 +0000 Raimund Renkert 'New Chart' for w-differences curve.
Wed, 18 Jan 2012 16:21:30 +0000 Raimund Renkert 'New Chart' for discharge longitudinal section curve.
Wed, 18 Jan 2012 15:50:34 +0000 Raimund Renkert 'New Chart' for duration curve.
Wed, 18 Jan 2012 14:45:24 +0000 Felix Wolfsteller Added HYKFacet.
Wed, 18 Jan 2012 14:36:16 +0000 Raimund Renkert 'New Chart' for computed discharge curve.
Wed, 18 Jan 2012 13:39:16 +0000 Felix Wolfsteller Added stubby hyk infrastructure.
Wed, 18 Jan 2012 13:33:08 +0000 Felix Wolfsteller Add 'hyk' facet type.
Wed, 18 Jan 2012 13:29:41 +0000 Felix Wolfsteller Add hyk facet to compatibility list of winfo.xml
Wed, 18 Jan 2012 09:29:12 +0000 Ingo Weinzierl Added convinience functions to FLYSArtifact and FLYSUtils.
Tue, 17 Jan 2012 18:26:45 +0000 Sascha L. Teichmann Speed up the join of calculation results and the km annotations.
Tue, 17 Jan 2012 17:05:18 +0000 Sascha L. Teichmann Use the fast cross section lines from backend now.
Tue, 17 Jan 2012 09:00:30 +0000 Felix Wolfsteller Fix stateId/hash assignment in WaterlevelFacet.
Tue, 17 Jan 2012 08:17:50 +0000 Felix Wolfsteller Made StaticWQKmsArtifact a fully featured Artifact.
Tue, 17 Jan 2012 08:09:03 +0000 Felix Wolfsteller Cosmetics.
Tue, 17 Jan 2012 08:01:22 +0000 Felix Wolfsteller Refactored to easier enjoy benefits of caching.
Tue, 17 Jan 2012 07:55:12 +0000 Felix Wolfsteller Cosmetics, added new DataFacet constructor.
Mon, 16 Jan 2012 17:38:39 +0000 Sascha L. Teichmann Use improved caching for cross section lines data.
Mon, 16 Jan 2012 15:51:46 +0000 Sascha L. Teichmann Added cached/chunked access to cross section lines. TODO: Use the FastCrossSectionLines.
Mon, 16 Jan 2012 13:40:32 +0000 Ingo Weinzierl Added a new calculation option for historical discharge curves.
Mon, 16 Jan 2012 13:29:10 +0000 Felix Wolfsteller Added certain facets to compatibility matrix.
Mon, 16 Jan 2012 13:27:34 +0000 Felix Wolfsteller Fixed annotations state xml.
Mon, 16 Jan 2012 09:34:56 +0000 Felix Wolfsteller Cosmetics.
Mon, 16 Jan 2012 08:40:42 +0000 Ingo Weinzierl Enabled old floodmap calculations for output type 'map'.
Fri, 13 Jan 2012 12:19:53 +0000 Raimund Renkert Initial implementation for module 'new chart'.
Fri, 13 Jan 2012 11:41:05 +0000 Felix Wolfsteller Cosmetics.
Fri, 13 Jan 2012 11:40:27 +0000 Felix Wolfsteller Avoid an unlikely NPE.
Fri, 13 Jan 2012 11:08:41 +0000 Felix Wolfsteller Prevent range collapsing when negative values are given.
Thu, 12 Jan 2012 16:59:52 +0000 Raimund Renkert Changed the MapArtifact name to 'new_map'.
Thu, 12 Jan 2012 16:49:00 +0000 Sascha L. Teichmann StableXYDifferenceRenderer: Added code to calculate the area of the generated polygons.
Thu, 12 Jan 2012 16:01:01 +0000 Sascha L. Teichmann StableXYDifferenceRenderer: Replaced System.err.println()s with proper logging.
Thu, 12 Jan 2012 13:41:23 +0000 Felix Wolfsteller Fix flys/issue450 (i18n: Datenkorb: longitudinal-section).
Thu, 12 Jan 2012 12:30:18 +0000 Felix Wolfsteller Added accidentally ommitted ChangeLog entry.
Thu, 12 Jan 2012 12:29:56 +0000 Felix Wolfsteller Implementation towards areas at other than first axis (flys/issue441).
Thu, 12 Jan 2012 12:22:40 +0000 Felix Wolfsteller Removed call to removed functions.
Thu, 12 Jan 2012 12:20:56 +0000 Felix Wolfsteller Cosmetics.
Wed, 11 Jan 2012 14:36:19 +0000 Felix Wolfsteller Fix flys/issue439, made annotations available via datacage.
Wed, 11 Jan 2012 14:32:50 +0000 Raimund Renkert Introduced new output type 'map'.
Wed, 11 Jan 2012 14:13:11 +0000 Felix Wolfsteller Fix flys/issue446: Added default theme for certain mainvalues.
Wed, 11 Jan 2012 11:54:16 +0000 Sascha L. Teichmann Removed security problem when working with map infos.
Wed, 11 Jan 2012 11:01:36 +0000 Sascha L. Teichmann Removed superfluous imports.
Wed, 11 Jan 2012 10:17:16 +0000 Ingo Weinzierl Made old calculation results available for floodmaps.
Tue, 10 Jan 2012 11:50:01 +0000 Ingo Weinzierl Implemented initialize() in FloodMapState to enable cloning floodmaps.
Tue, 10 Jan 2012 11:44:46 +0000 Ingo Weinzierl Made classes to merge Collection Outs more verbose for better debugging.
Mon, 09 Jan 2012 08:27:15 +0000 Ingo Weinzierl Call State.initialize() for each State of an Artifact in FLYSArtifact.
Sat, 07 Jan 2012 08:02:56 +0000 Sascha L. Teichmann Added missing service to invalidate the caches via the REST interface.
Fri, 06 Jan 2012 14:19:35 +0000 Ingo Weinzierl #298 Fixed broken auto-zoom-to-wsplgen in floodmaps.
Fri, 06 Jan 2012 12:55:01 +0000 Felix Wolfsteller Add cache config for static wqkms data.
Fri, 06 Jan 2012 12:02:10 +0000 Raimund Renkert Added initial state to map artifact to be able to advance and step back.
Fri, 06 Jan 2012 10:11:48 +0000 Felix Wolfsteller Fix name for certain facets loaded via datacage.
Fri, 06 Jan 2012 09:38:58 +0000 Ingo Weinzierl #196 Localized the WQ labels in CSV exports.
Fri, 06 Jan 2012 08:06:00 +0000 Felix Wolfsteller flys/issue442 (i18n: Datenkorb: flood-protections)
Fri, 06 Jan 2012 07:57:28 +0000 Felix Wolfsteller Fix typo in meta data, such that string can be translated in GUI.
Thu, 05 Jan 2012 18:35:09 +0000 Sascha L. Teichmann Added a service to invalidate caches by their names. Useful tp prevent cache inconsistencies caused by external ETL processes.
Thu, 05 Jan 2012 14:32:44 +0000 Felix Wolfsteller Fixed issue432 (legenditem-size ignored for area legend items).
Thu, 05 Jan 2012 14:29:54 +0000 Raimund Renkert Implemented new module "new map".
Thu, 05 Jan 2012 14:15:07 +0000 Ingo Weinzierl #444 Take care on NullPointerExceptions in getWQMode. Take 'false' as default value if no 'wq_free' item is existing.
Thu, 05 Jan 2012 13:55:17 +0000 Felix Wolfsteller Disable cross section cache to avoid lazy initialization issues.
Thu, 05 Jan 2012 13:39:58 +0000 Ingo Weinzierl #447 removed empty Outputs from Collection's attribute.
Thu, 05 Jan 2012 10:46:32 +0000 Ingo Weinzierl #440 Support river axes that consist of more than a single geometry.
Thu, 05 Jan 2012 08:34:47 +0000 Ingo Weinzierl Repaired broken legend items.
Wed, 04 Jan 2012 16:13:10 +0000 Ingo Weinzierl Added support for pointsize in chart themes.
Wed, 04 Jan 2012 15:23:26 +0000 Ingo Weinzierl Small bugfix: use correct keys for buffering min/max values in EnhancedLineAndShapeRenderer.
Wed, 04 Jan 2012 14:43:48 +0000 Ingo Weinzierl Moved JFreeChart specific classes to de.intevation.flys.jfree and added required imports.
Wed, 04 Jan 2012 14:25:10 +0000 Ingo Weinzierl Performance improvements for EnhancedLineAndShapeRenderer: buffer minimum and maximum for each series.
Wed, 04 Jan 2012 12:24:35 +0000 Ingo Weinzierl #393 Added a new Renderer and Options in Themes that allow displaying minimum and maximum of a chart series.
Tue, 03 Jan 2012 13:14:42 +0000 Felix Wolfsteller Allow styling of outline of areas.
Tue, 03 Jan 2012 10:12:49 +0000 Ingo Weinzierl #104 Use Wst.determineMinMaxQFree() to determine the min/max Qs at a given kilometer.
Tue, 03 Jan 2012 09:57:55 +0000 Felix Wolfsteller Adjust Area styles.
Mon, 02 Jan 2012 13:30:44 +0000 Ingo Weinzierl #370 Added a 'W at gauge' column to CSV exports if 'W at gauge' mode has been selected.
Mon, 02 Jan 2012 11:01:29 +0000 Ingo Weinzierl Added i18n strings used in CSV exports.
Mon, 02 Jan 2012 10:59:42 +0000 Ingo Weinzierl Improved the WaterlevelExporter: added range check for W/Q at gauge.
Mon, 02 Jan 2012 09:46:39 +0000 Ingo Weinzierl Part 2 of #125: add gaugename and Q description based on the selected WQ mode.
Mon, 02 Jan 2012 08:51:45 +0000 Ingo Weinzierl Removed unused imports.
Mon, 02 Jan 2012 08:50:50 +0000 Ingo Weinzierl Part 1 of #125: added a description for a location to the WaterlevelExport.
Thu, 29 Dec 2011 14:21:52 +0000 Ingo Weinzierl Added min/max values for free Qs to the Artifact's DESCRIBE document.
Wed, 28 Dec 2011 12:46:56 +0000 Ingo Weinzierl Fixed order to determine correct step width of Qs and Ws.
Wed, 28 Dec 2011 12:39:35 +0000 Ingo Weinzierl Validate user defined Qs based on the start kilometer ('Q free').
Wed, 28 Dec 2011 08:28:13 +0000 Ingo Weinzierl Compute better step width for W/Q input.

http://dive4elements.wald.intevation.org