Wed, 29 Apr 2015 18:20:23 +0200 |
Tom Gottfried |
(issue1801) Reference gauge for waterlevel calculation depends on direction of calculation or flow direction.
|
Wed, 29 Apr 2015 18:17:53 +0200 |
Tom Gottfried |
(issue1801) Return defined gauge at limit between two gauge ranges.
|
Wed, 29 Apr 2015 16:36:29 +0200 |
Tom Gottfried |
Remove misuse of method for determining gauge for a long range.
|
Wed, 29 Apr 2015 14:13:57 +0200 |
Andre Heinecke |
(issue1754) Fix check for empty data bounds
|
Wed, 29 Apr 2015 12:30:57 +0200 |
Tom Gottfried |
(issue1801) Determine gauge at a station always with same tolerance.
|
Wed, 29 Apr 2015 11:56:04 +0200 |
Andre Heinecke |
(issue1754) Fix Radius calculation for filtered (smoothed) facets
|
Tue, 28 Apr 2015 14:22:47 +0200 |
Andre Heinecke |
(issue1754) Do not base smoothing radius on calculation range
|
Mon, 27 Apr 2015 17:35:28 +0200 |
Andre Heinecke |
(issue1754) Do not filter BedHeightSoundings to range.
|
Mon, 27 Apr 2015 15:15:44 +0200 |
Andre Heinecke |
Deduplicate code in Minfo / Wifo difference select states.
|
Mon, 27 Apr 2015 14:50:38 +0200 |
Andre Heinecke |
Deduplicate W / BedHeight Difference selection panel code
|
Mon, 27 Apr 2015 12:48:41 +0200 |
Andre Heinecke |
Backout 8716:b5ac17a10d22 Regression risk too high.
|
Mon, 27 Apr 2015 12:48:24 +0200 |
Andre Heinecke |
Backout 8709:71ae18553377 Regression risk too high.
|
Mon, 27 Apr 2015 11:45:31 +0200 |
Andre Heinecke |
(issue1754) Only create new Recommendations
|
Fri, 24 Apr 2015 18:03:46 +0200 |
Andre Heinecke |
(issue1448) There is no more need for off_epoch infos
|
Fri, 24 Apr 2015 18:01:18 +0200 |
Tom Gottfried |
(issue1602) We don't distinguish between types since sometime but we want to have metadata at the facet.
|
Fri, 24 Apr 2015 17:54:12 +0200 |
Andre Heinecke |
(issue1448) Remove obsolete code for OfficalEpoch "Calculation"
|
Fri, 24 Apr 2015 17:18:48 +0200 |
Andre Heinecke |
(issue1448) Localize SedimentLoadInfo Exceptions shown in the client
|
Fri, 24 Apr 2015 17:17:56 +0200 |
Andre Heinecke |
(issue1448) Also filter epoch values in sq_time_interval mode
|
Fri, 24 Apr 2015 15:57:49 +0200 |
Andre Heinecke |
Improve ArtifactHelper creation debug output
|
Fri, 24 Apr 2015 15:57:23 +0200 |
Andre Heinecke |
(issue1754) Also fixup master artifact for already loaded recommendations
|
Fri, 24 Apr 2015 12:45:55 +0200 |
Andre Heinecke |
Change database connection debug output to traces
|
Wed, 15 Apr 2015 17:22:02 +0200 |
Andre Heinecke |
Change some debugs to trace in theme factory
|
Fri, 24 Apr 2015 15:06:38 +0200 |
Tom Gottfried |
(issue1750) Apply schema changes to oracle, which are already done for PostgreSQL.
|
Thu, 23 Apr 2015 19:20:40 +0200 |
Tom Gottfried |
(issue1787) Globally sorting WST-columns over avg(Q)+max(Q) might give unexpected results at some kms. We thus sort locally since Rev 93a31cfb18c0.
|
Thu, 23 Apr 2015 19:13:33 +0200 |
Tom Gottfried |
(issue1787) Sort WQ data locally over Q bevor lookup of Qs for given W.
|
Thu, 23 Apr 2015 19:06:41 +0200 |
Tom Gottfried |
Avoid NPE: fixRes is null if wqkms.lenght==0.
|
Thu, 23 Apr 2015 16:42:42 +0200 |
Tom Gottfried |
Remove some superfluous debug output and obsolete outcommented code.
|
Wed, 22 Apr 2015 11:32:08 +0200 |
Tom Gottfried |
(issue1602) Use correct descriptor for sounding width y-data.
|
Mon, 20 Apr 2015 17:57:48 +0200 |
Tom Gottfried |
Remove useless line of code (thanks for the hint, SLT).
|
Mon, 20 Apr 2015 15:32:03 +0200 |
Tom Gottfried |
(issue1670) Remove parallel implementation for gaps in line themes.
|
Mon, 20 Apr 2015 15:31:12 +0200 |
Tom Gottfried |
(issue1670) Purge obsolete if-branching.
|
Mon, 20 Apr 2015 15:03:02 +0200 |
Tom Gottfried |
(issue1670) There is no point in refilling half of the gaps.
|
Mon, 20 Apr 2015 12:58:52 +0200 |
Tom Gottfried |
(issue1670) Remove 99-percent copy-paste method, which had been used only once.
|
Mon, 20 Apr 2015 12:50:00 +0200 |
Tom Gottfried |
(issue1670) We want to see gaps larger than 100 m, not 100 km.
|
Mon, 20 Apr 2015 10:23:40 +0200 |
Tom Gottfried |
(issue1750) Use new MeasuremenStation-methods to find companion station and do less checking for inconsistent data (schema or at least importer do the job now).
|
Mon, 20 Apr 2015 10:21:45 +0200 |
Tom Gottfried |
(issue1750) New methods for finding the actual location and companion station of a measurement station.
|
Fri, 17 Apr 2015 15:04:16 +0200 |
Tom Gottfried |
(issue1750) Consistently attach parameters of suspended respectively bedload material to measurement station of respective type.
|
Fri, 17 Apr 2015 14:55:42 +0200 |
Tom Gottfried |
(issue1750) There can be only one SQ-relation of a parameter for a time range (given by sq_relation_id) per station and some other attributes might be null.
|
Fri, 17 Apr 2015 14:50:08 +0200 |
Tom Gottfried |
Handle empty strings as missing values without warning when parsing SQ-relations.
|
Thu, 16 Apr 2015 18:38:19 +0200 |
Tom Gottfried |
(issue1763) Reduce code-duplication (patch by Sascha Teichmann).
|
Wed, 15 Apr 2015 18:36:11 +0200 |
Tom Gottfried |
(issue1763) Empty strings are most likely intended as missing values, so don't try to parse them (plus enhanced logging).
|
Wed, 15 Apr 2015 17:30:27 +0200 |
Tom Gottfried |
(issue1796) We don't necessarily need the river Rhine. SedDB river names are purely optional.
|
Tue, 14 Apr 2015 17:57:09 +0200 |
Tom Gottfried |
(issue1755) Remove redundant conditional checks.
|
Tue, 14 Apr 2015 17:23:15 +0200 |
Tom Gottfried |
(issue1755) The essence is that interpolation is impossible though their might be data.
|
Mon, 13 Apr 2015 11:26:44 +0200 |
Andre Heinecke |
(issue1796) Use seddb name of a river when accessing the seddb
|
Mon, 13 Apr 2015 11:24:32 +0200 |
Andre Heinecke |
(issue 1796) Scheme change! Add model for seddb_name lookup table.
|
Mon, 13 Apr 2015 11:03:00 +0200 |
Andre Heinecke |
issue1755 Prevent out of bounds access when there is no data
|
Fri, 10 Apr 2015 17:47:00 +0200 |
Tom Gottfried |
(issue1763) Fix filtering of lines when parsing bed heights.
|
Fri, 10 Apr 2015 17:42:10 +0200 |
Tom Gottfried |
(issue1763) We have UNIQUE(station, bedHeight) since Rev 2d16f4a0bdcc and comparing with the other parameters will never return any row if any of them is null.
|
Fri, 10 Apr 2015 13:26:59 +0200 |
Tom Gottfried |
Fix spelling and whitespace-cleanup in ETL-README.
|
Fri, 10 Apr 2015 11:17:03 +0200 |
Andre Heinecke |
(issue1755) Add non empty measurement facets again
|
Thu, 09 Apr 2015 19:27:54 +0200 |
Tom Gottfried |
Importer, do not jump knowingly over the cliff.
|
Thu, 09 Apr 2015 18:20:55 +0200 |
Tom Gottfried |
(issue1755) Fix i18n.
|
Thu, 09 Apr 2015 17:29:45 +0200 |
Tom Gottfried |
Mavenize importer packaging and allow packaging for specific versions and database systems.
|
Thu, 09 Apr 2015 17:08:51 +0200 |
Tom Gottfried |
(issue1763) Correct properties in importer scripts.
|
Thu, 09 Apr 2015 11:54:55 +0200 |
Tom Gottfried |
Correct usage section in release script.
|
Thu, 09 Apr 2015 11:13:45 +0200 |
Tom Gottfried |
Remove outdated contributed scripts in backend.
|
Thu, 09 Apr 2015 11:11:12 +0200 |
Tom Gottfried |
Remove outdated or useless README-files in backend.
|
Thu, 09 Apr 2015 10:52:51 +0200 |
Tom Gottfried |
Move importer configuration to a single place.
|
Thu, 09 Apr 2015 10:28:50 +0200 |
Andre Heinecke |
(issue1755) Some spelling fixes for problems in bedquality calc
|
Thu, 09 Apr 2015 10:27:00 +0200 |
Andre Heinecke |
(issue1755) Add Problem also if a result is not interpolateable
|
Wed, 08 Apr 2015 19:09:38 +0200 |
Andre Heinecke |
(issue1755) Only add facets / results when they do not consist exlcusively of NaN values.
|
Wed, 08 Apr 2015 18:15:55 +0200 |
Tom Gottfried |
(issue1763) Use more distinct constraint names and adapt drop-script.
|
Wed, 08 Apr 2015 14:47:30 +0200 |
Tom Gottfried |
Move static measurement types to their natural home.
|
Tue, 07 Apr 2015 16:35:11 +0200 |
Tom Gottfried |
(issue1787) Do not accept any non-NaN W-value but check for epsilon.
|
Tue, 07 Apr 2015 12:10:45 +0200 |
Tom Gottfried |
Sorting rows is a prerequisite.
|
Tue, 07 Apr 2015 11:20:36 +0200 |
Tom Gottfried |
Use EpsilonComparator instead of redundant implementation.
|
Thu, 02 Apr 2015 18:37:26 +0200 |
Andre Heinecke |
(issue1755) Fix typo in theme mapping for porosity sublayer
|
Thu, 02 Apr 2015 18:22:01 +0200 |
Andre Heinecke |
(issue1755) Do not add empty data facets in BedQuality State
|
Thu, 02 Apr 2015 17:40:18 +0200 |
Andre Heinecke |
(issue1803) Use MD5 instead of a homegrown hashing algorithm
|
Thu, 02 Apr 2015 17:17:51 +0200 |
Tom Gottfried |
Whitespace-cleanup schema files.
|
Thu, 02 Apr 2015 15:48:48 +0200 |
Andre Heinecke |
(issue1755) Add problem / report handling to BedQualityCalculation
|
Thu, 02 Apr 2015 14:10:25 +0200 |
Andre Heinecke |
(issue1755) Uppercase diameter names in CSV Header
|
Thu, 02 Apr 2015 14:09:27 +0200 |
Andre Heinecke |
(issue1755) Fix Y Axis label in Bed Quality facets. It's used in the CSV Export.
|
Thu, 02 Apr 2015 14:06:56 +0200 |
Andre Heinecke |
(issue1755) Fix typo that filtered out porosity.sublayer facets
|
Wed, 01 Apr 2015 17:10:03 +0200 |
Andre Heinecke |
(issue1755) Do not create interpolated themes and disable export of non interpolatable data.
|
Wed, 01 Apr 2015 13:11:30 +0200 |
Tom Gottfried |
User smarter new interface from RangeAccess.
|
Tue, 31 Mar 2015 17:28:27 +0200 |
Andre Heinecke |
Improve coding style in KMFilter loops
|
Tue, 31 Mar 2015 17:27:20 +0200 |
Andre Heinecke |
(issue1754) Do not switch W and Km data when Range filtering WKms
|
Tue, 31 Mar 2015 15:16:12 +0200 |
Andre Heinecke |
(issue1754) Increase m index after adding an interpolated result.
|
Mon, 30 Mar 2015 19:29:31 +0200 |
Andre Heinecke |
(issue1754) Handle a>b in static BedHeight facets.
|
Mon, 30 Mar 2015 19:28:41 +0200 |
Andre Heinecke |
(issue1754) Simplify code to handle a>b cases.
|
Mon, 30 Mar 2015 19:27:11 +0200 |
Andre Heinecke |
(issue1754) Extend RangeAccess to simplyfiy range access where it is assumed that from < to
|
Mon, 30 Mar 2015 19:11:35 +0200 |
Andre Heinecke |
Remove obsolete code.
|
Fri, 27 Mar 2015 19:10:02 +0100 |
Andre Heinecke |
Remove JavaScript greeting exception.
|
Fri, 27 Mar 2015 18:59:27 +0100 |
Andre Heinecke |
(issue1754) Handle inverted presentation in BedDifference exporter
|
Fri, 27 Mar 2015 18:54:03 +0100 |
Tom Gottfried |
Enforce strings we rely on.
|
Fri, 27 Mar 2015 17:42:27 +0100 |
Tom Gottfried |
SCHEMA CHANGE: Remove unnecessary direct relation of sq_relation with rivers.
|
Fri, 27 Mar 2015 17:27:08 +0100 |
Andre Heinecke |
(issue1755) Do not print empty rows for empty results in bedquality export
|
Fri, 27 Mar 2015 17:26:34 +0100 |
Andre Heinecke |
(issue1755) Fix check for valid date range.
|
Fri, 27 Mar 2015 17:25:30 +0100 |
Andre Heinecke |
(issue1755) Do not treat empty values as part of the result
|
Fri, 27 Mar 2015 16:55:58 +0100 |
Andre Heinecke |
(issue1755) Validate selected periods and ranges.
|
Fri, 27 Mar 2015 16:54:56 +0100 |
Andre Heinecke |
(issue1755) Extend validation to allow localized error messages.
|
Fri, 27 Mar 2015 14:39:01 +0100 |
Andre Heinecke |
Do not show lines if showlines is not set.
|
Fri, 27 Mar 2015 13:40:25 +0100 |
Andre Heinecke |
(issue1753) Fix theme for SQ Outliers and SQ Measurements
|
Thu, 26 Mar 2015 18:21:18 +0100 |
Andre Heinecke |
(issue1754) Unify PDF and CSV export and invert presentation if start > end
|
Thu, 26 Mar 2015 17:33:55 +0100 |
Andre Heinecke |
(issue1608) Determine field type with the first non empty element
|
Thu, 26 Mar 2015 17:11:36 +0100 |
Tom Gottfried |
SQ relation CSV export: order info lines according to columns plus whitespace cosmetics.
|
Thu, 26 Mar 2015 12:11:49 +0100 |
Andre Heinecke |
(issue1753) Fix number format for S
|
Thu, 26 Mar 2015 12:07:43 +0100 |
Andre Heinecke |
Handle the case where the period panel is used in a state without start and end
|
Thu, 26 Mar 2015 12:06:47 +0100 |
Andre Heinecke |
(issue1753) Fix CSV metadata explanation fields for Mesurement data
|
Thu, 26 Mar 2015 11:53:41 +0100 |
Andre Heinecke |
Add default value handling in MultiPeriodPanel
|
Thu, 26 Mar 2015 11:52:05 +0100 |
Andre Heinecke |
Cleanups
|
Thu, 26 Mar 2015 11:51:47 +0100 |
Andre Heinecke |
Add default value to BedQuality period selection
|
Thu, 26 Mar 2015 11:46:03 +0100 |
Andre Heinecke |
Fix unit displayed in WFree calculation
|
Thu, 26 Mar 2015 11:06:48 +0100 |
Andre Heinecke |
Actually check if there are no items instead of no data.
|
Thu, 26 Mar 2015 11:06:13 +0100 |
Andre Heinecke |
Handle surprising filter behaivor of *Overviews. Don't create items for unavailable data.
|
Wed, 25 Mar 2015 19:37:44 +0100 |
Andre Heinecke |
Fix handling of multiple entries in SQPeriodSelect default start/end calculation
|
Wed, 25 Mar 2015 19:20:13 +0100 |
Andre Heinecke |
Send default values for SQ Period selection to the client.
|
Wed, 25 Mar 2015 19:18:43 +0100 |
Andre Heinecke |
Try to find "default" data items for start and end in period panel
|
Wed, 25 Mar 2015 18:23:22 +0100 |
Andre Heinecke |
Remove another obsolete check for an unused (and removed) config value
|
Wed, 25 Mar 2015 18:22:34 +0100 |
Andre Heinecke |
Remove duplicated code.
|
Wed, 25 Mar 2015 18:12:16 +0100 |
Andre Heinecke |
Clean up bad code from 8614:e7a2234e7c3f
|
Wed, 25 Mar 2015 11:41:36 +0100 |
Andre Heinecke |
(issue1755) Clarify how default mecahnism works and remove unused config value.
|
Wed, 25 Mar 2015 11:25:28 +0100 |
Andre Heinecke |
(issue1608) Export appropiate data for different result types
|
Tue, 24 Mar 2015 18:17:23 +0100 |
Andre Heinecke |
(issue1755) Add good defaults for bedquality distance selection
|
Tue, 24 Mar 2015 15:22:16 +0100 |
Andre Heinecke |
(issue869) Add spacer for multiline items
|
Tue, 24 Mar 2015 11:57:23 +0100 |
Andre Heinecke |
(issue1799) Strip whitespace from river names
|
Tue, 24 Mar 2015 11:08:39 +0100 |
Andre Heinecke |
(issue1754) Allow ranges where start > end also for beddifferences.
|
Tue, 24 Mar 2015 11:06:47 +0100 |
Andre Heinecke |
(issue1754) Better fix for radius calculation then 8607:2010da0904b7
|
Tue, 24 Mar 2015 10:52:23 +0100 |
Andre Heinecke |
(issue1754) Check if start > end and handle this
|
Tue, 24 Mar 2015 10:50:46 +0100 |
Andre Heinecke |
(issue1754) Fix radius caluculation inf CurveFilter if Start > End
|
Fri, 20 Mar 2015 18:58:38 +0100 |
Andre Heinecke |
(issue1753) Align data columns to the right side.
|
Fri, 20 Mar 2015 18:42:00 +0100 |
Andre Heinecke |
(issue1750) Fix id handling with oracle
|
Fri, 20 Mar 2015 17:31:06 +0100 |
Andre Heinecke |
(issue1750) Check for stations according to measurement station range logic
|
Fri, 20 Mar 2015 16:36:37 +0100 |
Andre Heinecke |
(issue1753) Increase widht of PARAMETER column
|
Fri, 20 Mar 2015 16:32:44 +0100 |
Andre Heinecke |
(issue1753) Use epsilon comparator to compare range km's
|
Fri, 20 Mar 2015 15:20:32 +0100 |
Andre Heinecke |
Lowercase additional call to createPropertyUi
|
Fri, 20 Mar 2015 15:04:25 +0100 |
Andre Heinecke |
(issue1753) Fix editing the point color (not Color) of SQThemes.
|
Fri, 20 Mar 2015 14:31:14 +0100 |
Andre Heinecke |
(issue1051) Show offending value in year format error
|
Thu, 19 Mar 2015 16:50:24 +0100 |
Andre Heinecke |
(issue1051) Fix recommended official epochs for period mode
|
Thu, 19 Mar 2015 16:28:40 +0100 |
Andre Heinecke |
(issue1051) Validate epochs before adding them to the list
|
Thu, 19 Mar 2015 15:15:55 +0100 |
Andre Heinecke |
(issue1755) Filter out NaN values before creating the interplation function
|
Thu, 19 Mar 2015 14:21:39 +0100 |
Andre Heinecke |
(issue1755) Fix export order of multiple result columns
|
Thu, 19 Mar 2015 14:03:47 +0100 |
Andre Heinecke |
(issue1755) Fix filtering of BedQuality user facets
|
Thu, 19 Mar 2015 13:49:13 +0100 |
Andre Heinecke |
Don't warn for defined behavior.
|
Thu, 19 Mar 2015 13:36:38 +0100 |
Andre Heinecke |
(issue1755) Add interpolated facets and update themes accordingly
|
Thu, 19 Mar 2015 10:38:12 +0100 |
Andre Heinecke |
Don't die if only one year is selected for SedimentLoad calculation
|
Wed, 18 Mar 2015 18:59:17 +0100 |
Andre Heinecke |
Remove obsolete class
|
Wed, 18 Mar 2015 18:48:26 +0100 |
Andre Heinecke |
Remove additionally uneccessary file.
|
Wed, 18 Mar 2015 18:47:07 +0100 |
Andre Heinecke |
Remove unecessary imports
|
Wed, 18 Mar 2015 18:42:08 +0100 |
Andre Heinecke |
(issue1755) Generalise BedQuality result handling
|
Tue, 17 Mar 2015 18:52:00 +0100 |
Andre Heinecke |
(issue1599) Fix ManualPoints axis for bedheight_middle outputs.
|
Tue, 17 Mar 2015 16:37:17 +0100 |
Andre Heinecke |
Reduce duplicated functions to obtain layer descritpions for bedquality
|
Mon, 16 Mar 2015 17:38:08 +0100 |
Andre Heinecke |
(issue1754) Add range to W / Bed difference export.
|
Mon, 16 Mar 2015 17:08:04 +0100 |
Andre Heinecke |
Add jasper -> jrxml converted files.
|
Mon, 16 Mar 2015 16:59:37 +0100 |
Tom Gottfried |
Update SQL-statements to schema-changes in rev 6d8d7425a6b5.
|
Mon, 16 Mar 2015 15:36:38 +0100 |
Andre Heinecke |
(issue1755) Interpolate BedQuality Results
|
Mon, 16 Mar 2015 14:37:30 +0100 |
Andre Heinecke |
(issue1753) Format S with only up to three fractional digits
|
Mon, 16 Mar 2015 14:32:45 +0100 |
Andre Heinecke |
(issue1753) Add english measurements jasper template
|
Mon, 16 Mar 2015 11:35:19 +0100 |
Andre Heinecke |
(issue1753) Implement PDF export of SQ Measurement data.
|
Mon, 16 Mar 2015 10:00:39 +0100 |
Andre Heinecke |
(issue1753) Use different theme for measurements overview and single diagrams
|
Wed, 11 Mar 2015 17:44:27 +0100 |
Andre Heinecke |
Renable access to seddb sessions
|
Tue, 10 Mar 2015 17:01:42 +0100 |
Andre Heinecke |
Merge of MINFO improvement developments
|
Fri, 06 Mar 2015 12:26:12 +0100 |
Tom Gottfried |
There seems to be no use case for not overriding these methods.
|
Fri, 06 Mar 2015 11:21:36 +0100 |
Tom Gottfried |
The bug that motivated this extremely defensive error-handling was fixed in Rev fe7e9da6312a by nomore calling close() on a private variable.
|
Fri, 06 Mar 2015 10:57:56 +0100 |
Tom Gottfried |
Remove superfluous private variable.
|
Fri, 27 Feb 2015 19:07:25 +0100 |
Andre Heinecke |
(issue1798) Adjust WinCM according to W in NHN axis on explicit zoom
|
Thu, 26 Feb 2015 15:53:28 +0100 |
Andre Heinecke |
Do not get any wst values just to get the name of the differences for export.
|
Thu, 26 Feb 2015 15:52:04 +0100 |
Andre Heinecke |
Readd StaticWQKmsCacheKey and use it again.
|
Thu, 26 Feb 2015 15:37:03 +0100 |
Tom Gottfried |
Use updated class name instead of no more existant.
|
Tue, 24 Feb 2015 18:32:18 +0100 |
Andre Heinecke |
(issue1797) Increase session debug output
|
Tue, 24 Feb 2015 17:16:14 +0100 |
Andre Heinecke |
(issue1797) Move close into session release and guard it.
|
Tue, 17 Feb 2015 13:58:23 +0100 |
Andre Heinecke |
Replace offensive comment by a more constructive note.
|
Mon, 16 Feb 2015 18:03:09 +0100 |
Andre Heinecke |
(Issue1755) Add distance step selection to bed quality artifact
|
Mon, 16 Feb 2015 17:09:14 +0100 |
Andre Heinecke |
Move static operation out of loop.
|
Mon, 16 Feb 2015 15:58:52 +0100 |
Andre Heinecke |
(issue1755) Move KM Step handling from Winfo artifact to RangeAccess
|
Mon, 16 Feb 2015 12:12:12 +0100 |
Tom Gottfried |
Accept more elevation system names (e.g. with hyphen).
|
Mon, 16 Feb 2015 11:48:05 +0100 |
Tom Gottfried |
Meta-data on sounding width associated to bed heights is redundant to real data associated to values.
|
Mon, 16 Feb 2015 11:08:33 +0100 |
Tom Gottfried |
Bed heights are just bed heights since a while ('single' is obsolete).
|
Mon, 16 Feb 2015 10:12:12 +0100 |
Tom Gottfried |
Remove obsolete class hierarchy for bed height data.
|
Mon, 16 Feb 2015 09:50:39 +0100 |
Tom Gottfried |
Abstract parser for bed heights is obsolete.
|
Mon, 16 Feb 2015 09:35:06 +0100 |
Tom Gottfried |
Importer: Remove obsolete interface for bed heights.
|
Mon, 16 Feb 2015 09:21:49 +0100 |
Tom Gottfried |
Remove obsolete interface for bed height values.
|
Mon, 16 Feb 2015 09:00:08 +0100 |
Tom Gottfried |
Morphological width imported and stored with heights is redundant to table morphologic_width.
|
Mon, 16 Feb 2015 08:39:06 +0100 |
Tom Gottfried |
bed height differences datacage: only supply differences where subtrahend is older than minuend or year is unknown.
|
Mon, 16 Feb 2015 15:31:17 +0100 |
Andre Heinecke |
(issue1754) Add km filtering for winfo anf fixanal results in difference calculations
|
Mon, 16 Feb 2015 15:30:22 +0100 |
Andre Heinecke |
Actually configure a bedheight cache.
|
Mon, 16 Feb 2015 15:28:51 +0100 |
Andre Heinecke |
(issue1754) Fix wst static cache name.
|
Mon, 16 Feb 2015 15:28:22 +0100 |
Andre Heinecke |
(issue1754) Extend WKms interface for KM filtering
|
Mon, 16 Feb 2015 15:27:39 +0100 |
Andre Heinecke |
(issue1754) Gracefully handle empty differenc results (e.g from km 0,001 to 0,002)
|
Mon, 16 Feb 2015 12:55:38 +0100 |
Andre Heinecke |
(issue1754) Add distantce handling to WINFO differences state
|
Mon, 16 Feb 2015 11:30:27 +0100 |
Andre Heinecke |
Warn for not implemented difference handling of minfo artifacts.
|
Fri, 13 Feb 2015 16:36:52 +0100 |
Andre Heinecke |
(issue1750) It is an error if there are more then two stations at the same range.
|
Fri, 13 Feb 2015 16:17:46 +0100 |
Andre Heinecke |
(Issue1754) Make BedDifference calculation range dependent.
|
Fri, 13 Feb 2015 14:59:16 +0100 |
Andre Heinecke |
(issue1750) Take Static SQ Relations based on a range and merge them together
|
Fri, 13 Feb 2015 13:44:52 +0100 |
Andre Heinecke |
(issue1753) Remove "measured" from CSV header
|
Fri, 13 Feb 2015 12:35:18 +0100 |
Andre Heinecke |
(issue1753) Add measurements to CSV export
|
Fri, 13 Feb 2015 12:34:38 +0100 |
Andre Heinecke |
(issue1753) Add SQ Measurement dates as text annotations to points
|
Fri, 13 Feb 2015 12:34:06 +0100 |
Andre Heinecke |
(issue1753) Carry measurement date through SQ values
|
Fri, 13 Feb 2015 12:31:59 +0100 |
Andre Heinecke |
(issue1753) Add label theme for SQMeasurements
|
Fri, 13 Feb 2015 11:10:19 +0100 |
Andre Heinecke |
Log the server startup to stdout
|
Thu, 12 Feb 2015 17:29:33 +0100 |
Andre Heinecke |
(issue1599) Add manualpoints theme for MSH
|
Thu, 12 Feb 2015 12:18:47 +0100 |
Andre Heinecke |
(issue1068) Add different theme for SQOutlier curves and increase SQCurve linesize to 2
|
Thu, 12 Feb 2015 11:40:08 +0100 |
Andre Heinecke |
(issue1786) Enable manualline facets for cross section charts
|
Thu, 12 Feb 2015 11:17:46 +0100 |
Andre Heinecke |
(issue869) Remove horizontal lines in parameters
|
Wed, 11 Feb 2015 18:00:48 +0100 |
Andre Heinecke |
(issue1051) Use a list of single years in SedimentLoadYear mode
|
Wed, 11 Feb 2015 12:41:51 +0100 |
Andre Heinecke |
(issue1051) Add input support for epochs
|
Wed, 18 Feb 2015 17:17:20 +0100 |
Andre Heinecke |
(issue1788) Do not divide area by two.
|
Wed, 18 Feb 2015 16:57:58 +0100 |
Tom Gottfried |
(issue1717) Use unified description for y-field in editor for manual points in historical discharge time-diagrams.
|
Tue, 17 Feb 2015 16:17:31 +0100 |
Andre Heinecke |
(issue1795) Handle modules configuration for any module
|
Tue, 17 Feb 2015 12:36:13 +0100 |
Andre Heinecke |
(issue1794) Safeguard against layers without extent.
|
Fri, 30 Jan 2015 15:21:35 +0100 |
Andre Heinecke |
Update uuid of "Rhein"
|
Fri, 16 Jan 2015 18:35:35 +0100 |
Andre Heinecke |
(issue1777) Move logging code for existing tickets to the correct location
|
Mon, 12 Jan 2015 17:57:20 +0100 |
Tom Gottfried |
Remove useless i18n that cannot be called from server anyhow.
|
Fri, 19 Dec 2014 20:50:29 +0100 |
Tom Gottfried |
Release script: build binaries for publication when tagging and slightly mavenize the whole process.
|
Fri, 19 Dec 2014 19:32:05 +0100 |
Tom Gottfried |
Useful default for path to DEMs.
|
Fri, 19 Dec 2014 16:35:06 +0100 |
Tom Gottfried |
It's useful to have an uncompressed tar to which more files can be appended.
|
Fri, 19 Dec 2014 16:34:12 +0100 |
Tom Gottfried |
We don't need the base directory in the assembly.
|
Fri, 19 Dec 2014 15:24:43 +0100 |
Tom Gottfried |
Let overview be the first tab in SQ relation output.
|
Thu, 18 Dec 2014 16:12:01 +0100 |
Tom Gottfried |
On error log error.
|
Thu, 18 Dec 2014 15:45:17 +0100 |
Tom Gottfried |
Set useful default for mapserver-URLs.
|
Thu, 18 Dec 2014 11:20:51 +0100 |
Tom Gottfried |
Exclude transitive dependency because of conflicting version which breaks charting.
|
Wed, 17 Dec 2014 18:02:27 +0100 |
Tom Gottfried |
Update Oracle-POM in backend and add pom-oracle.xml with respective dependency to artifacts.
|
Wed, 17 Dec 2014 16:16:02 +0100 |
Tom Gottfried |
Configure standalone binary assembly.
|
Wed, 17 Dec 2014 15:56:41 +0100 |
Tom Gottfried |
Use Maven instead of potentially outdated JARs for creation of h2-databases. TODO: adapt release script.
|
Wed, 17 Dec 2014 10:50:35 +0100 |
Tom Gottfried |
OpenLayers download moved to github.
|
Tue, 16 Dec 2014 17:54:55 +0100 |
Tom Gottfried |
Put artifact server run-script in it's final place.
|
Tue, 16 Dec 2014 17:47:21 +0100 |
Tom Gottfried |
ETL: Upgrade PostgreSQL dependency to same version as river-backend.
|
Tue, 16 Dec 2014 15:58:33 +0100 |
Andre Heinecke |
(issue1782) Invert artifact range if necessary in officiallinefinder
|
Tue, 16 Dec 2014 15:40:00 +0100 |
Andre Heinecke |
(issue1782) Invert KM filter if from is larger then to
|
Tue, 16 Dec 2014 15:29:44 +0100 |
Andre Heinecke |
(issue1782) Select index based on km for step generation
|
Tue, 16 Dec 2014 14:27:13 +0100 |
Andre Heinecke |
(issue1777) Evaluate CLIENT_CONF environment variable
|
Tue, 16 Dec 2014 14:16:10 +0100 |
Andre Heinecke |
(issue1777) Add options to change login redirect and disable login
|
Tue, 16 Dec 2014 12:48:25 +0100 |
Andre Heinecke |
(issue1777) Log saml logins also as info without username.
|
Tue, 16 Dec 2014 12:47:46 +0100 |
Andre Heinecke |
(issue1777) Hide logout button if it is configured.
|
Tue, 16 Dec 2014 13:29:38 +0100 |
Tom Gottfried |
Whitespace-cleanup in XML-files.
|
Mon, 15 Dec 2014 19:30:10 +0100 |
Tom Gottfried |
Release script: remove installation specific defaults and give the possibility to overwrite any config-file in WEB-INF.
|
Mon, 15 Dec 2014 19:27:04 +0100 |
Tom Gottfried |
The used patch build of SmartGWT is not available anymore.
|
Mon, 15 Dec 2014 19:25:02 +0100 |
Tom Gottfried |
Release script: use trusted connections to repositories.
|
Mon, 15 Dec 2014 17:22:16 +0100 |
Tom Gottfried |
Remove obsolete Wiki-URL config in client.
|
Mon, 15 Dec 2014 16:40:21 +0100 |
Tom Gottfried |
The base-URL comes from elsewhere. Other *.properties-files know that already.
|
Fri, 12 Dec 2014 11:11:26 +0100 |
Tom Gottfried |
Do not filter tables without end date in recommendations for historical discharge tables.
|
Thu, 04 Dec 2014 18:15:05 +0100 |
Tom Gottfried |
Artifact-server config in release script: remove installation specific defaults and give the possibility to overwrite any config-file.
|
Thu, 04 Dec 2014 13:00:23 +0100 |
Tom Gottfried |
Do not give Oracle-JARs with hardcoded personal path in release script.
|
Thu, 04 Dec 2014 11:38:18 +0100 |
Tom Gottfried |
Correct header for release script.
|
Tue, 02 Dec 2014 17:58:45 +0100 |
Tom Gottfried |
Added tag 3.1.9 for changeset 7bc675e4e6e0
|
Tue, 02 Dec 2014 17:54:15 +0100 |
Sascha L. Teichmann |
Remove trailing whitespace.
3.1.9
|
Tue, 02 Dec 2014 17:51:56 +0100 |
Sascha L. Teichmann |
Removed obsolete imports.
|
Tue, 02 Dec 2014 15:25:34 +0100 |
Tom Gottfried |
Time series chart: bounds cannot allways be assumed to be given.
|
Tue, 02 Dec 2014 15:23:01 +0100 |
Tom Gottfried |
Do not flood log with details about all facets.
|
Tue, 02 Dec 2014 12:59:52 +0100 |
Tom Gottfried |
Datacage config: Oracle has no boolean data type and thus can not handle such CASE-statement in WHERE-clause.
|
Tue, 02 Dec 2014 12:03:50 +0100 |
Tom Gottfried |
Remove non-existant artifact from config.
|
Fri, 28 Nov 2014 16:34:40 +0100 |
Tom Gottfried |
Make maxWait configurable and wait for 30 seconds
|
Fri, 28 Nov 2014 10:21:40 +0100 |
Tom Gottfried |
maxWait should be set independendly of validationQuery.
|
Thu, 27 Nov 2014 20:25:31 +0100 |
Tom Gottfried |
Use validation queries for release.
|
Thu, 27 Nov 2014 20:15:38 +0100 |
Tom Gottfried |
Use explicit query to avoid hibernate connection leak.
|
Thu, 27 Nov 2014 19:55:55 +0100 |
Tom Gottfried |
Connection pool: do not wait forever for new connections and be more verbose.
|
Thu, 27 Nov 2014 19:14:05 +0100 |
Tom Gottfried |
Upgrade hibernate.
|
Thu, 27 Nov 2014 19:10:45 +0100 |
Tom Gottfried |
Add missing annotation.
|
Thu, 27 Nov 2014 17:46:37 +0100 |
Tom Gottfried |
Use RiverAccess instead of RiverUtils.
|
Thu, 27 Nov 2014 17:09:19 +0100 |
Tom Gottfried |
We depend on PostreSQL >= 9.1 at least since rev 598e4bec920b (because of CTE).
|
Wed, 26 Nov 2014 14:56:20 +0100 |
Tom Gottfried |
Use portable validation queries.
|
Wed, 26 Nov 2014 14:40:18 +0100 |
Tom Gottfried |
The used patch build of SmartGWT is not available anymore.
|
Tue, 25 Nov 2014 14:06:05 +0100 |
Andre Heinecke |
Add validation-query to example configuration.
|
Thu, 20 Nov 2014 11:27:10 +0100 |
Tom Gottfried |
Datacage: order WSTs according to column numbers in import files.
|
Tue, 18 Nov 2014 15:24:40 +0100 |
Andre Heinecke |
(issue1772) Use 0.001km tolarance instead of 0.1 to find matching km.
|
Thu, 13 Nov 2014 13:28:45 +0100 |
Tom Gottfried |
Remove obsolete lines from drop script.
|
Wed, 12 Nov 2014 13:31:53 +0100 |
Sascha L. Teichmann |
Added a validation SQL query to database backends.
|
Thu, 06 Nov 2014 15:16:37 +0100 |
Tom Gottfried |
Remove docs for specific system.
|
Wed, 05 Nov 2014 19:07:49 +0100 |
Tom Gottfried |
Cross section navigation: behave equally, regardless of whether an input value is below or above the range of possible values.
|
Wed, 05 Nov 2014 15:44:04 +0100 |
Andre Heinecke |
(issue1767) Fix lookup of closest value.
|
Wed, 05 Nov 2014 13:04:53 +0100 |
Tom Gottfried |
Gauge locations are obsolete since a long time.
|
Tue, 04 Nov 2014 17:09:04 +0100 |
Andre Heinecke |
(issue1767) Fix closet next value selection.
|
Tue, 04 Nov 2014 15:32:56 +0100 |
Tom Gottfried |
Add possibility to pack install-script in release tarball.
|
Thu, 30 Oct 2014 17:49:43 +0100 |
Tom Gottfried |
Remove no more existant processor from config.
|
Thu, 30 Oct 2014 15:03:55 +0100 |
Tom Gottfried |
Remove obsolete historical discharge curve implementations.
|
Thu, 30 Oct 2014 14:20:28 +0100 |
Tom Gottfried |
Load discharge curves via recommendations in historical discharge calculation. ToDo: Remove the other logic to load them.
|
Thu, 30 Oct 2014 14:17:49 +0100 |
Tom Gottfried |
Accept number as argument in dc:date-format().
|
Thu, 30 Oct 2014 14:10:41 +0100 |
Tom Gottfried |
Unify wording and spelling for axis fixation in chart properties editor.
|
Thu, 30 Oct 2014 11:03:19 +0100 |
Tom Gottfried |
Remove obsolete setting of start date.
|
Thu, 30 Oct 2014 10:33:16 +0100 |
Andre Heinecke |
(issue1764) Use datepicker with text field
|
Wed, 29 Oct 2014 19:52:06 +0100 |
Andre Heinecke |
Improve error handling.
|
Wed, 29 Oct 2014 19:51:39 +0100 |
Andre Heinecke |
(issue1764) Set upper-time and lower-time for time series axes
|
Wed, 29 Oct 2014 19:49:18 +0100 |
Andre Heinecke |
(issue1764) Handle date ranges in chart properties editor
|
Wed, 29 Oct 2014 16:02:37 +0100 |
Tom Gottfried |
Recognize the 'no-data value' of fromkm and tokm in datacage statement for discharge curves.
|
Tue, 28 Oct 2014 18:52:35 +0100 |
Andre Heinecke |
(issue1732) When duplication wsplgen artificats fix shapefile layers
|
Tue, 28 Oct 2014 16:10:42 +0100 |
Andre Heinecke |
(issue1733) Use rangeaccess to access range information in location select
|
Tue, 28 Oct 2014 11:31:33 +0100 |
Tom Gottfried |
The used patch build of SmartGWT is not available anymore. The newer was used for the 3.1.8 release already.
|
Mon, 27 Oct 2014 17:00:40 +0100 |
Andre Heinecke |
(issue1733) Fix locationdistancepanel
|
Mon, 27 Oct 2014 12:52:00 +0100 |
Andre Heinecke |
(issue1733) Fix switch between location and distance
|
Mon, 27 Oct 2014 12:38:22 +0100 |
Andre Heinecke |
(issue1733) Remove weird and broken code (fixes tab selection)
|
Mon, 27 Oct 2014 12:32:04 +0100 |
Andre Heinecke |
(issue1733) Clearly set location distance defaults
|
Fri, 24 Oct 2014 16:31:22 +0200 |
Andre Heinecke |
(issue1769) Adapt release script for new print url.
|
Fri, 24 Oct 2014 11:54:30 +0200 |
Tom Gottfried |
In case to equals from, and only in this case, there should be only one class. Then we have to set an arbitrary value > 0 for step because the user is allowed to give step=0.
|
Wed, 22 Oct 2014 17:33:43 +0200 |
Andre Heinecke |
(issue1762) Use getValue to obtain dateRange values
|
Tue, 21 Oct 2014 12:14:39 +0200 |
Tom Gottfried |
Do not transform Q values from cm to m.
|
Mon, 20 Oct 2014 18:26:15 +0200 |
Tom Gottfried |
Added tag 3.1.8 for changeset 7cb55659646d
|
Mon, 20 Oct 2014 18:22:07 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
3.1.8
|
Mon, 20 Oct 2014 18:15:44 +0200 |
Tom Gottfried |
Avoid encoding problem with NaN in bed difference export.
|
Mon, 20 Oct 2014 16:13:26 +0200 |
Tom Gottfried |
Adapt PDF-export to new columns in bed differences result.
|
Mon, 20 Oct 2014 14:22:51 +0200 |
Tom Gottfried |
Mention gauge name in theme name for historical discharge curves.
|
Mon, 20 Oct 2014 13:52:15 +0200 |
Tom Gottfried |
More cleanup in discharge data processing.
|
Mon, 20 Oct 2014 13:48:51 +0200 |
Tom Gottfried |
Unify descriptions of model discharge curve at gauge.
|
Mon, 20 Oct 2014 12:23:11 +0200 |
Tom Gottfried |
For fixation analysis, allow loading discharge curves from multiple gauges on calculation range via datacage.
|
Fri, 17 Oct 2014 19:21:45 +0200 |
Tom Gottfried |
Antiprogramming (in german: 'Softwareabwicklung')
|
Fri, 17 Oct 2014 19:13:40 +0200 |
Tom Gottfried |
i18n cleanup.
|
Fri, 17 Oct 2014 18:20:33 +0200 |
Tom Gottfried |
Load sounding width via recommendations for bed height differences and cleanup and fix related bed height macros.
|
Fri, 17 Oct 2014 17:39:34 +0200 |
Tom Gottfried |
Remove obsolete class.
|
Fri, 17 Oct 2014 17:29:30 +0200 |
Raimund Renkert |
Do not add a sounding width facet for bed height differences.
|
Fri, 17 Oct 2014 17:21:40 +0200 |
Raimund Renkert |
fixed bed difference export.
|
Fri, 17 Oct 2014 17:05:59 +0200 |
Tom Gottfried |
There might be no sounding width given at some stations of a bed height single.
|
Fri, 17 Oct 2014 16:08:25 +0200 |
Sascha L. Teichmann |
Removed obsolete import.
|
Fri, 17 Oct 2014 16:06:37 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
Fri, 17 Oct 2014 16:05:27 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
Fri, 17 Oct 2014 13:34:47 +0200 |
Raimund Renkert |
Added i18n strings for sounding width and data gap.
|
Fri, 17 Oct 2014 13:34:08 +0200 |
Raimund Renkert |
Bedheight differences exports sounding width and data gap for minuend and subtrahend.
|
Fri, 17 Oct 2014 13:17:12 +0200 |
Sascha L. Teichmann |
Only draw discharge curve if on same station as navigation.
|
Fri, 17 Oct 2014 12:50:35 +0200 |
Sascha L. Teichmann |
Removed morpho width from bed height diffs.
|
Fri, 17 Oct 2014 11:44:01 +0200 |
Tom Gottfried |
Do not filter bed heights by year in datacage for optional data (plus some cleanup).
|
Thu, 16 Oct 2014 16:45:53 +0200 |
Tom Gottfried |
Give ordered list of measurement stations at river.
|
Thu, 16 Oct 2014 13:39:22 +0200 |
Tom Gottfried |
Add comment to measurement stations info.
|
Thu, 16 Oct 2014 11:15:09 +0200 |
Tom Gottfried |
Reduce code duplication and repair filter for sediment load-recommendations.
|
Wed, 15 Oct 2014 19:48:20 +0200 |
Tom Gottfried |
SCHEMA CHANGE: 'comment' is not acceptable as column name for Oracle.
|
Wed, 15 Oct 2014 19:42:19 +0200 |
Tom Gottfried |
More detailed documentation on SQ-relation import.
|
Wed, 15 Oct 2014 19:35:35 +0200 |
Tom Gottfried |
We only want to use stations with an end km.
|
Wed, 15 Oct 2014 19:20:26 +0200 |
Tom Gottfried |
SCHEMA CHANGE: removed superfluous columns station and river_id from measurement_stations and adapted other components accordingly.
|
Wed, 15 Oct 2014 14:58:46 +0200 |
Tom Gottfried |
SCHEMA CHANGE: There is no boolean data type in oracle, and therefore it's no good idea to use it in postgresql.
|
Tue, 14 Oct 2014 19:21:33 +0200 |
Tom Gottfried |
Whitespace cleanup and small addition regarding sediment load at measurement stations.
|
Tue, 14 Oct 2014 16:33:54 +0200 |
Tom Gottfried |
Purge redundant station-column (the values will go to kmstart).
|
Tue, 14 Oct 2014 16:32:06 +0200 |
Tom Gottfried |
Purge sorting stations without range to end of list.
|
Tue, 14 Oct 2014 15:22:11 +0200 |
Tom Gottfried |
Put date range into facet descriptions for curve and measurements.
|
Tue, 14 Oct 2014 12:41:37 +0200 |
Tom Gottfried |
Distinguish between types of measurement stations and filter appropriately (plus minor cleanup in related classes).
|
Mon, 13 Oct 2014 17:22:52 +0200 |
Tom Gottfried |
Unify colors of SQ-relations and distinguish outliers by point size.
|
Mon, 13 Oct 2014 16:21:09 +0200 |
Tom Gottfried |
Remove non-mapped dependencies of removed theme.
|
Mon, 13 Oct 2014 14:40:47 +0200 |
Tom Gottfried |
Theme-style cleanup for discharge curves.
|
Fri, 10 Oct 2014 15:44:34 +0200 |
Tom Gottfried |
Add possibility to give custom client log4j.properties.
|
Fri, 10 Oct 2014 00:58:30 +0200 |
Tom Gottfried |
Added tag 3.1.7 for changeset 319aa972a1a3
|
Thu, 09 Oct 2014 12:13:56 +0200 |
Raimund Renkert |
Fixed date filter for fix overview.
3.1.7
|
Thu, 09 Oct 2014 12:20:48 +0200 |
Tom Gottfried |
Log successful/unsuccessful authentication without traceback.
|
Thu, 09 Oct 2014 12:13:30 +0200 |
Sascha L. Teichmann |
Backed out changeset da67b2bca1c0 Not needed.
|
Thu, 09 Oct 2014 11:57:17 +0200 |
Sascha L. Teichmann |
Fixing overview filter: Accept date range as UNIX time stamps, too.
|
Wed, 08 Oct 2014 16:28:02 +0200 |
Raimund Renkert |
Add location data to sq relation artifact. Fixed station name.
|
Wed, 08 Oct 2014 16:23:46 +0200 |
Raimund Renkert |
Added location to measurement station sq relation.
|
Wed, 08 Oct 2014 15:41:47 +0200 |
Tom Gottfried |
Further subtitle cleanup (including obsolete classes using them).
|
Wed, 08 Oct 2014 12:27:53 +0200 |
Raimund Renkert |
If context contains pnp, transform W to m.
|
Wed, 08 Oct 2014 11:49:07 +0200 |
Sascha L. Teichmann |
Only the master-artifact should decide about injected CURRENT_KM et al. (and removed dependend obsolete class).
|
Wed, 08 Oct 2014 11:02:16 +0200 |
Raimund Renkert |
Removed dependency to FixWQCurveGenerator in processor.
|
Tue, 07 Oct 2014 19:19:50 +0200 |
Tom Gottfried |
For whatever reason (if any) facet descriptions with trailing whitespace are stripped from the legend.
|
Tue, 07 Oct 2014 19:04:06 +0200 |
Tom Gottfried |
Removed some code duplication and moved macros to more appropriate places in file.
|
Tue, 07 Oct 2014 19:02:50 +0200 |
Tom Gottfried |
Fixed some typos in datacage docs.
|
Tue, 07 Oct 2014 15:23:08 +0200 |
Tom Gottfried |
Unify discharge curve subtitles.
|
Tue, 07 Oct 2014 13:41:54 +0200 |
Raimund Renkert |
Try to determine gauge by km in gauge discharge facet for exporter.
|
Tue, 07 Oct 2014 11:24:13 +0200 |
Tom Gottfried |
Use more recent SmartGWT-build.
|
Tue, 07 Oct 2014 11:23:39 +0200 |
Tom Gottfried |
Add possibility to give custom config for server log.
|
Mon, 06 Oct 2014 19:07:57 +0200 |
Tom Gottfried |
Transform export in cm at gauge. TODO: don't transfrom twice if coming from PegelInfo.
|
Mon, 06 Oct 2014 15:33:52 +0200 |
Raimund Renkert |
merged.
|
Mon, 06 Oct 2014 15:27:20 +0200 |
Raimund Renkert |
Use context constant for current km in fix delta w/t generator.
|
Mon, 06 Oct 2014 14:49:00 +0200 |
Tom Gottfried |
Purge RiverUtils from ATExporter.
|
Mon, 06 Oct 2014 13:41:14 +0200 |
Tom Gottfried |
Manual points shall be plotted in discharge diagrams.
|
Mon, 06 Oct 2014 11:21:42 +0200 |
Tom Gottfried |
It's the description we want to see in the legend, not the facet name.
|
Fri, 03 Oct 2014 10:26:58 +0200 |
Tom Gottfried |
Q-symmetric datacage configuration for user-data.
|
Thu, 02 Oct 2014 19:31:09 +0200 |
Tom Gottfried |
Make derived curve-diagram working with subtitle.
|
Thu, 02 Oct 2014 19:05:01 +0200 |
Tom Gottfried |
Re-add line previously removed accidentally between lots of comments.
|
Thu, 02 Oct 2014 18:57:10 +0200 |
Sascha L. Teichmann |
Added km sub title to fix derivate curve, too.
|
Thu, 02 Oct 2014 16:33:16 +0200 |
Sascha L. Teichmann |
Removed obsolete import.
|
Thu, 02 Oct 2014 14:02:57 +0200 |
Raimund Renkert |
merged.
|
Thu, 02 Oct 2014 14:01:13 +0200 |
Raimund Renkert |
Added i18n strings.
|
Thu, 02 Oct 2014 13:59:20 +0200 |
Raimund Renkert |
Fixed W/Q diagram subtitle in fix analysis.
|
Thu, 02 Oct 2014 13:57:50 +0200 |
Raimund Renkert |
Use the CURRENT_KM constant from injectors.
|
Thu, 02 Oct 2014 11:49:15 +0200 |
Tom Gottfried |
The current km is needed for SQ diagrams too.
|
Thu, 02 Oct 2014 11:46:44 +0200 |
Tom Gottfried |
Overwriting the current km in context gives unexpected results if artifacts from different km have been loaded.
|
Thu, 02 Oct 2014 11:04:14 +0200 |
Tom Gottfried |
s/logger/log/ or removed unused logger.
|
Thu, 02 Oct 2014 10:13:31 +0200 |
Tom Gottfried |
dataset can be null.
|
Thu, 02 Oct 2014 09:55:31 +0200 |
Tom Gottfried |
Fetch current km from context (and remove obsolete or superfluous comments and logging).
|
Thu, 02 Oct 2014 09:42:12 +0200 |
Tom Gottfried |
wUnit might be null.
|
Wed, 01 Oct 2014 15:54:47 +0200 |
Tom Gottfried |
Purge obsolete representation of reference system for discharge tables.
|
Wed, 01 Oct 2014 15:42:55 +0200 |
Tom Gottfried |
Instead of adding datum to Q-values, correctly transform W-values to meter above datum.
|
Wed, 01 Oct 2014 15:24:21 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
Wed, 01 Oct 2014 15:21:54 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
Wed, 01 Oct 2014 14:13:41 +0200 |
Tom Gottfried |
Deliver historical discharge curves in meter, not centimeter over datum.
|
Wed, 01 Oct 2014 13:42:19 +0200 |
Raimund Renkert |
merged.
|
Wed, 01 Oct 2014 13:41:38 +0200 |
Raimund Renkert |
Use the current km from context for fix analysis W/Q subtitle.
|
Wed, 01 Oct 2014 13:40:39 +0200 |
Raimund Renkert |
Updated i18n strings.
|
Wed, 01 Oct 2014 13:40:04 +0200 |
Raimund Renkert |
Added y axis label to discharge processors.
|
Wed, 01 Oct 2014 13:37:27 +0200 |
Raimund Renkert |
Use i18n string for w in cm axis.
|
Wed, 01 Oct 2014 13:36:35 +0200 |
Raimund Renkert |
Fixed i18n string for x axis label in discharge curves.
|
Wed, 01 Oct 2014 13:40:30 +0200 |
Tom Gottfried |
Never ever set current km via RiverUtils.
|
Wed, 01 Oct 2014 13:37:43 +0200 |
Tom Gottfried |
Remove misplaced file extension.
|
Wed, 01 Oct 2014 12:23:39 +0200 |
Tom Gottfried |
Let injectors be strictly distinct from each other and give more meaningful names (they know what they do, not where they will be used. The latter is configuration).
|
Wed, 01 Oct 2014 12:13:28 +0200 |
Sascha L. Teichmann |
Correct url parameter in client.
|
Wed, 01 Oct 2014 12:01:46 +0200 |
Sascha L. Teichmann |
There ist no need to format a number as a string and then re-parse it to double to get its double value. Just take the double value!
|
Wed, 01 Oct 2014 11:07:52 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
Tue, 30 Sep 2014 15:18:09 +0200 |
Tom Gottfried |
Auto-include zero in Q-domain axis.
|
Tue, 30 Sep 2014 14:40:02 +0200 |
Raimund Renkert |
Use ws in m for duration curve.
|
Tue, 30 Sep 2014 13:03:55 +0200 |
Tom Gottfried |
Remove duplication of AnnotationHelper-code in ChartGenerator.
|
Tue, 30 Sep 2014 11:52:17 +0200 |
Tom Gottfried |
Allow W-mainvalues in SQ-relation.
|
Tue, 30 Sep 2014 11:50:43 +0200 |
Tom Gottfried |
Introduce annotations, which know to which axis they belong.
|
Tue, 30 Sep 2014 10:57:58 +0200 |
Raimund Renkert |
Create mainvalue facets before setting up the artifact.
|
Mon, 29 Sep 2014 15:49:04 +0200 |
Raimund Renkert |
Look for gauge if no pnp is set in the context and return w in cm if at gauge.
|
Fri, 26 Sep 2014 18:23:45 +0200 |
Tom Gottfried |
Scale second W-axis in cm according to first axis, which is expanded relative to the data, and set bounds for zooming purposes (plus a bit of cleanup in DiagramGenerator).
|
Fri, 26 Sep 2014 17:22:51 +0200 |
Tom Gottfried |
Avoid NPE if river is not accessible.
|
Fri, 26 Sep 2014 14:22:37 +0200 |
Tom Gottfried |
The derivative curve is also a discharge diagram.
|
Fri, 26 Sep 2014 14:18:27 +0200 |
Tom Gottfried |
Throw non-lethal XPathException if not at gauge instead of lethal PSQLException if at gauge.
|
Fri, 26 Sep 2014 10:53:26 +0200 |
Tom Gottfried |
Q-main values as recommendations in SQ. TODO: solve DDZ.
|
Fri, 26 Sep 2014 10:50:54 +0200 |
Tom Gottfried |
Let's be more generous with facet activity of main values.
|
Fri, 26 Sep 2014 10:17:02 +0200 |
Tom Gottfried |
bed_height_single.old_elevation_model_id is not NOT NULL.
|
Fri, 26 Sep 2014 09:44:48 +0200 |
Tom Gottfried |
Main values: Reduce code duplication and correct logic to specify whether we are at gauge or not.
|
Fri, 26 Sep 2014 08:40:20 +0200 |
Tom Gottfried |
Avoid NPE if no dataset is activated in theme list.
|
Fri, 26 Sep 2014 08:36:28 +0200 |
Raimund Renkert |
Added config for sq relation loaded via datacage.
|
Thu, 25 Sep 2014 17:25:07 +0200 |
Raimund Renkert |
merged.
|
Thu, 25 Sep 2014 17:24:35 +0200 |
Raimund Renkert |
Use the sq relation artifact to load data from datacage.
|
Thu, 25 Sep 2014 17:23:12 +0200 |
Raimund Renkert |
Inject current km and pnp into the context used to calculate W in cm at gauge.
|
Thu, 25 Sep 2014 12:21:47 +0200 |
Tom Gottfried |
Reduce misspelled, superfluous logging.
|
Thu, 25 Sep 2014 11:00:31 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
Thu, 25 Sep 2014 10:56:44 +0200 |
Sascha L. Teichmann |
Use right logger in DischargeGenerator.
|
Thu, 25 Sep 2014 10:38:21 +0200 |
Sascha L. Teichmann |
Run native2ascii over FLYS*.properties.
|
Wed, 24 Sep 2014 18:33:11 +0200 |
Sascha L. Teichmann |
Added missing l10n strings.
|
Wed, 24 Sep 2014 17:39:29 +0200 |
Sascha L. Teichmann |
Generate a W in CM axis if there are W data.
|
Wed, 24 Sep 2014 16:42:55 +0200 |
Sascha L. Teichmann |
Added PNP injectors to Q/X diagrams.
|
Wed, 24 Sep 2014 16:38:13 +0200 |
Sascha L. Teichmann |
And Developer said, Let there be Q symmetry and there was Q symmetry.
|
Wed, 24 Sep 2014 16:24:32 +0200 |
Tom Gottfried |
Do not die if values <= 0 are tried to be plotted on log axis.
|
Wed, 24 Sep 2014 13:29:34 +0200 |
Tom Gottfried |
Make ChartArea and thus annotations sensible for logarithmic axes (plus some minor cleanup).
|
Wed, 24 Sep 2014 12:16:53 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
Wed, 24 Sep 2014 12:02:37 +0200 |
Raimund Renkert |
merged.
|
Wed, 24 Sep 2014 12:02:05 +0200 |
Raimund Renkert |
Updated the client to build a default artifact for sq relations.
|
Wed, 24 Sep 2014 11:59:49 +0200 |
Raimund Renkert |
Configured "static" sq relation to use a default D4EArtifact and two states to hold the parameters and outs.
|
Wed, 24 Sep 2014 11:56:03 +0200 |
Raimund Renkert |
Renamed ui provider for static data panel.
|
Tue, 23 Sep 2014 16:45:47 +0200 |
Tom Gottfried |
Make SQ-relations loadable in WQ-diagrams.
|
Tue, 23 Sep 2014 15:07:39 +0200 |
Tom Gottfried |
Make WQ-data loadable in SQ-diagrams. We still need to handle mainvalues and values <=0 on x-axis.
|
Tue, 23 Sep 2014 12:56:23 +0200 |
Tom Gottfried |
Q-symmetry: SQ-relations should not be filtered for specific outs (and optimised statement a bit).
|
Tue, 23 Sep 2014 10:11:52 +0200 |
Tom Gottfried |
Put all macros for wst-data in one place and reduce code duplications.
|
Mon, 22 Sep 2014 18:17:47 +0200 |
Tom Gottfried |
Remove duplications from discharge prototypes and put it all together.
|
Mon, 22 Sep 2014 17:11:20 +0200 |
Raimund Renkert |
merged.
|
Mon, 22 Sep 2014 17:10:23 +0200 |
Raimund Renkert |
Added injector for PNP.
|
Mon, 22 Sep 2014 17:08:48 +0200 |
Raimund Renkert |
Updated the client to build a default artifact for gauge discharge curve.
|
Mon, 22 Sep 2014 17:05:37 +0200 |
Raimund Renkert |
Configured gauge discharge curve to use a default D4EArtifact and two states to hold the parameters and outs.
|
Fri, 19 Sep 2014 16:29:11 +0200 |
Tom Gottfried |
Classify and sort iteration over user-data non-recommendations.
|
Fri, 19 Sep 2014 16:07:59 +0200 |
Tom Gottfried |
Classify and sort iteration over non-recommendations.
|
Fri, 19 Sep 2014 15:45:54 +0200 |
Tom Gottfried |
Classify and sort iteration over recommendations.
|
Fri, 19 Sep 2014 15:31:03 +0200 |
Tom Gottfried |
Purge clash of out-names, resulting hacks and tests for not existing outs and give some more meaningful names.
|
Fri, 19 Sep 2014 09:49:09 +0200 |
Tom Gottfried |
Official sedimentload epochs should be seperated from other data in datacage.
|
Thu, 18 Sep 2014 18:41:14 +0200 |
Tom Gottfried |
These meta-lines had been invented before.
|
Thu, 18 Sep 2014 18:16:51 +0200 |
Tom Gottfried |
At least since rev eb052d759fcc, there are no bed height epochs anymore.
|
Wed, 17 Sep 2014 19:46:19 +0200 |
Tom Gottfried |
Added tag 3.1.6 for changeset 301a32bd7045
|
Wed, 17 Sep 2014 19:28:39 +0200 |
Tom Gottfried |
Though not yet part of the calculation, suspended load has to be optionally loadable through datacage.
3.1.6
|
Wed, 17 Sep 2014 17:56:37 +0200 |
Tom Gottfried |
Set facet activity for middle bed height.
|
Wed, 17 Sep 2014 17:35:36 +0200 |
Tom Gottfried |
Add theme for porosity and sync second with default.
|
Wed, 17 Sep 2014 17:13:48 +0200 |
Tom Gottfried |
In case the list is not ordered, in the end diagrams might look weird.
|
Wed, 17 Sep 2014 13:24:13 +0200 |
Tom Gottfried |
Consider new SQ-diagrams in datacage config.
|
Wed, 17 Sep 2014 13:12:12 +0200 |
Tom Gottfried |
Essentially backout rev 8ad0b7bc3e73 as this makes some SQ-relation curves appear buckled.
|
Wed, 17 Sep 2014 13:00:14 +0200 |
Tom Gottfried |
Avoid NPE if river is not accessible.
|
Wed, 17 Sep 2014 12:32:24 +0200 |
Raimund Renkert |
merged.
|
Wed, 17 Sep 2014 12:32:01 +0200 |
Raimund Renkert |
Fixed style for sq relation link in measurement station info grid.
|
Wed, 17 Sep 2014 09:22:50 +0200 |
Tom Gottfried |
i18n is meant for translation and unfortunately the client has three files for that.
|
Wed, 17 Sep 2014 09:04:30 +0200 |
Raimund Renkert |
merged.
|
Wed, 17 Sep 2014 09:03:39 +0200 |
Raimund Renkert |
Avoid NPE in discharge context injector if no start km was set.
|
Wed, 17 Sep 2014 09:02:44 +0200 |
Raimund Renkert |
Added themes for new fraction in sq relation.
|
Wed, 17 Sep 2014 09:01:27 +0200 |
Raimund Renkert |
Added new fraction to sq relation.
|
Tue, 16 Sep 2014 18:48:34 +0200 |
Tom Gottfried |
Outs might be set in the client.
|
Tue, 16 Sep 2014 18:33:46 +0200 |
Tom Gottfried |
Crude script to find non-existant outs in meta-data.xml
|
Tue, 16 Sep 2014 16:10:30 +0200 |
Tom Gottfried |
Update comment on conditional loading of user content.
|
Tue, 16 Sep 2014 14:57:55 +0200 |
Raimund Renkert |
merged.
|
Tue, 16 Sep 2014 14:57:14 +0200 |
Raimund Renkert |
The default state is no more abstract.
|
Tue, 16 Sep 2014 12:12:06 +0200 |
Tom Gottfried |
Set facet activity for bed quality.
|
Tue, 16 Sep 2014 11:33:08 +0200 |
Tom Gottfried |
Add metadata to bedheight facets in bed height differences.
|
Mon, 15 Sep 2014 15:38:16 +0200 |
Sascha L. Teichmann |
Adopt configuation of artifacts into new xml documents to make them configurable inline.
|
Mon, 15 Sep 2014 15:00:48 +0200 |
Tom Gottfried |
Purge some duplicated logging an misleading comments.
|
Mon, 15 Sep 2014 11:58:31 +0200 |
Tom Gottfried |
Call orphaned macro originating from 'fix_wq_curve' in prototype.
|
Mon, 15 Sep 2014 11:26:48 +0200 |
Tom Gottfried |
Make use of publicly available external WMS (Pegelonline) otherwise called from BfG-specific macro.
|
Fri, 12 Sep 2014 19:09:24 +0200 |
Tom Gottfried |
Remove call of BfG-specific macro.
|
Fri, 12 Sep 2014 19:00:45 +0200 |
Tom Gottfried |
A bit less chaos in i18n for bed heights.
|
Fri, 12 Sep 2014 14:56:49 +0200 |
Raimund Renkert |
merged.
|
Fri, 12 Sep 2014 14:56:22 +0200 |
Raimund Renkert |
Added themes for SQ relation overview chart.
|
Fri, 12 Sep 2014 14:55:42 +0200 |
Raimund Renkert |
SQ relation overview is now a single chart containing all fractions.
|
Fri, 12 Sep 2014 13:12:25 +0200 |
Sascha L. Teichmann |
Added discharge curve prototye.
|
Fri, 12 Sep 2014 08:42:41 +0200 |
Raimund Renkert |
Fixed location distance panel. TODO: Switch to location table and select tabs.
|
Fri, 12 Sep 2014 08:39:10 +0200 |
Raimund Renkert |
Fixed multi period panel in fix analysis.
|
Thu, 11 Sep 2014 17:37:03 +0200 |
Tom Gottfried |
Making i18n work was just easier using less wrappers in this case (issue1631).
|
Thu, 11 Sep 2014 16:12:39 +0200 |
Tom Gottfried |
Measurement stations without range should not be used in calculation and we assume the beginning of the range is the station.
|
Thu, 11 Sep 2014 14:45:17 +0200 |
Tom Gottfried |
Suspended sand is part of total load.
|
Thu, 11 Sep 2014 11:23:10 +0200 |
Raimund Renkert |
merged.
|
Thu, 11 Sep 2014 11:22:38 +0200 |
Raimund Renkert |
Fixed date range panel in fix analysis.
|
Wed, 10 Sep 2014 12:45:35 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
Wed, 10 Sep 2014 12:42:39 +0200 |
Sascha L. Teichmann |
Made call context injectors a list of comma separated classes.
|
Wed, 10 Sep 2014 10:02:46 +0200 |
Raimund Renkert |
merged.
|
Wed, 10 Sep 2014 10:01:57 +0200 |
Raimund Renkert |
Added injectors to config and moved subtitle conf.
|
Wed, 10 Sep 2014 10:01:11 +0200 |
Raimund Renkert |
Added context injectors for discharge curves.
|
Tue, 09 Sep 2014 20:08:12 +0200 |
Tom Gottfried |
Added tag 3.1.5 for changeset d81c4b0d5ca7
|
Tue, 09 Sep 2014 19:05:08 +0200 |
Tom Gottfried |
Write CSV-header only once.
3.1.5
|
Tue, 09 Sep 2014 18:41:11 +0200 |
Tom Gottfried |
Fix duration curve i18n.
|
Tue, 09 Sep 2014 17:05:21 +0200 |
Tom Gottfried |
Some i18n completion in hist. discharge curves.
|
Tue, 09 Sep 2014 16:29:53 +0200 |
Tom Gottfried |
Enable dynamic zoom-range in subtitle.
|
Tue, 09 Sep 2014 14:53:12 +0200 |
Tom Gottfried |
Patch build from given date not available anymore.
|
Tue, 09 Sep 2014 13:49:28 +0200 |
Tom Gottfried |
We well want to average NaNs but want to know the cause of the result being NaN.
|
Tue, 09 Sep 2014 12:03:46 +0200 |
Tom Gottfried |
Suggestion: sort measurement stations along the river and only along the river.
|
Tue, 09 Sep 2014 11:13:37 +0200 |
Andre Heinecke |
(issue1448) Fix info service for epoch / periods and off epoch
|
Tue, 09 Sep 2014 10:53:50 +0200 |
Tom Gottfried |
Suggestion: Load official epochs via recommendations instead of a pseudo-calculation.
|
Mon, 08 Sep 2014 19:48:17 +0200 |
Andre Heinecke |
(issue1448) Actually filter out not matching sq_time_interval_ids
|
Mon, 08 Sep 2014 19:47:01 +0200 |
Andre Heinecke |
(issue1448) Objectify sq_time_interval id.
|
Mon, 08 Sep 2014 19:01:26 +0200 |
Andre Heinecke |
(issue1448) Finally use the sq time interval as filter in the calculation.
|
Mon, 08 Sep 2014 19:00:30 +0200 |
Andre Heinecke |
(issue1448) Unify SedimentLoadData ctor again
|
Mon, 08 Sep 2014 18:59:10 +0200 |
Andre Heinecke |
(issue1448) Add Sq time interval to sediment load accessor
|
Mon, 08 Sep 2014 18:31:17 +0200 |
Andre Heinecke |
(issue1448) Look through all the data for sq_ti_id in following states.
|
Mon, 08 Sep 2014 17:52:52 +0200 |
Andre Heinecke |
(issue1448) Carry sq_ti_date in artifact description anf fix sqtipanel
|
Mon, 08 Sep 2014 17:50:10 +0200 |
Andre Heinecke |
(issue1448) Use correct data name for ti_id and carry string value of selected date.
|
Mon, 08 Sep 2014 16:24:50 +0200 |
Andre Heinecke |
(issue1448) In a list of one element. Select the only element.
|
Mon, 08 Sep 2014 16:24:16 +0200 |
Andre Heinecke |
(issue1448) Add Panel for new sq_ti_select state
|
Mon, 08 Sep 2014 16:23:38 +0200 |
Andre Heinecke |
(issue1448) Extend SedimentLoadInfo request to handle sq time intervals
|
Mon, 08 Sep 2014 16:21:26 +0200 |
Andre Heinecke |
(issue1448) Extend SL info service to handle sq_time_intervals
|
Mon, 08 Sep 2014 16:19:15 +0200 |
Andre Heinecke |
(issue1448) Fix return values of SQ time interval accessors
|
Mon, 08 Sep 2014 16:18:37 +0200 |
Andre Heinecke |
(issue1448) Add l10n for new sq time interval state.
|
Mon, 08 Sep 2014 16:17:59 +0200 |
Andre Heinecke |
(issue1448) Add SQ Time interval select state
|
Mon, 08 Sep 2014 16:14:43 +0200 |
Sascha L. Teichmann |
Pass request document to the context injectors.
|
Mon, 08 Sep 2014 16:06:50 +0200 |
Sascha L. Teichmann |
Merged.
|
Mon, 08 Sep 2014 16:06:34 +0200 |
Sascha L. Teichmann |
Made it compile with changed ContextInjector interface again.
|
Mon, 08 Sep 2014 15:54:12 +0200 |
Tom Gottfried |
Let official epochs be showy and remove detritus of 'yields' in datacage config.
|
Mon, 08 Sep 2014 15:48:11 +0200 |
Sascha L. Teichmann |
Call context inspector in output helper.
|
Mon, 08 Sep 2014 13:33:39 +0200 |
Sascha L. Teichmann |
Stop stupid propagation of out subtype in generators. What is this? It is not used anyway.
|
Mon, 08 Sep 2014 13:17:49 +0200 |
Sascha L. Teichmann |
Added context injector to generators.
|
Mon, 08 Sep 2014 12:28:16 +0200 |
Sascha L. Teichmann |
Merged
|
Mon, 08 Sep 2014 12:27:55 +0200 |
Sascha L. Teichmann |
Anti programming: Throw CrossSectionApp away. Not useful ATM. The backing data structures are fine now and the original purpose of the app was to figure them out.
|
Mon, 08 Sep 2014 12:25:47 +0200 |
Tom Gottfried |
We only need to know what's going on upstream.
|
Mon, 08 Sep 2014 12:21:32 +0200 |
Tom Gottfried |
Fetch missing values from database and show them in diagrams.
|
Mon, 08 Sep 2014 10:03:00 +0200 |
Tom Gottfried |
Allow fractions without SQ-time interval (suspended sediment) to be loaded.
|
Fri, 05 Sep 2014 20:57:31 +0200 |
Tom Gottfried |
Error reports for sediment load calculation.
|
Fri, 05 Sep 2014 19:30:50 +0200 |
Andre Heinecke |
Do not inherit smartgwt include the javascript directly in FLYS.html
superdev
|
Fri, 05 Sep 2014 19:29:11 +0200 |
Andre Heinecke |
Update GWT to 2.6.1
superdev
|
Fri, 05 Sep 2014 15:09:44 +0200 |
Andre Heinecke |
(issue1448) Use left join to permit loads with empty sq_time intervals to be handled.
|
Fri, 05 Sep 2014 18:30:20 +0200 |
Sascha L. Teichmann |
Fixed broken build.
|
Fri, 05 Sep 2014 18:23:36 +0200 |
Sascha L. Teichmann |
Sediment load: converted grain fraction name to an array lookup.
|
Fri, 05 Sep 2014 16:54:45 +0200 |
Raimund Renkert |
Added new processor for fix derived curve.
|
Fri, 05 Sep 2014 15:57:39 +0200 |
Raimund Renkert |
Added processor for discharge curve in fixanalysis.
|
Fri, 05 Sep 2014 15:26:40 +0200 |
Tom Gottfried |
Do not return pure NaN data.
|
Fri, 05 Sep 2014 14:53:58 +0200 |
Tom Gottfried |
Sediment loads at measurement stations and longitudinal sections need different processing and styling for diagrams.
|
Fri, 05 Sep 2014 13:19:22 +0200 |
Sascha L. Teichmann |
sed 's/logger/log/g' src/**/*.java
|
Fri, 05 Sep 2014 12:58:17 +0200 |
Sascha L. Teichmann |
sed src/**/*.java 's/logger/log/g'
|
Fri, 05 Sep 2014 12:54:58 +0200 |
Sascha L. Teichmann |
Make it compile again.
|
Fri, 05 Sep 2014 12:50:33 +0200 |
Sascha L. Teichmann |
sed -i src/**/*.java 's/logger/log/g'
|
Fri, 05 Sep 2014 12:22:42 +0200 |
Andre Heinecke |
(issue1448) Add sq time intervals to sediment load data model.
|
Fri, 05 Sep 2014 12:19:13 +0200 |
Sascha L. Teichmann |
Forget to adjust a string reference to a moved backend utils class.
|
Fri, 05 Sep 2014 10:27:50 +0200 |
Sascha L. Teichmann |
Anti programming: Removed obsolete classes in client. This may break stuff because of the GWT magic.
|
Fri, 05 Sep 2014 10:10:42 +0200 |
Sascha L. Teichmann |
Find obsolete Java files in more than one project hierachie.
|
Fri, 05 Sep 2014 10:09:16 +0200 |
Sascha L. Teichmann |
Anti programming: Removed TIM parser which ist not needed any longer.
|
Thu, 04 Sep 2014 17:47:32 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
Thu, 04 Sep 2014 17:33:01 +0200 |
Tom Gottfried |
Sum up fractions from stations and previous stations according to respective validity model.
|
Thu, 04 Sep 2014 16:25:06 +0200 |
Sascha L. Teichmann |
Add Q'n'D Python script to find obsolete Java files.
|
Thu, 04 Sep 2014 15:48:48 +0200 |
Sascha L. Teichmann |
merged
|
Thu, 04 Sep 2014 15:43:13 +0200 |
Sascha L. Teichmann |
Anti programming.
|
Thu, 04 Sep 2014 15:27:47 +0200 |
Raimund Renkert |
merged.
|
Thu, 04 Sep 2014 15:26:55 +0200 |
Raimund Renkert |
Use processors for historical discharge curves.
|
Thu, 04 Sep 2014 15:03:25 +0200 |
Sascha L. Teichmann |
Moved package org.dive4elements.river.utils to org.dive4elements.river.backend.utils.
|
Thu, 04 Sep 2014 13:00:55 +0200 |
Sascha L. Teichmann |
Removed NASTY package clash. We had too org.dive4elements.river.util packages.
|
Thu, 04 Sep 2014 12:03:02 +0200 |
Tom Gottfried |
Removed obsolete average and renamed some symbols to make the difference between single fractions and sums of them clearer in the calculation.
|
Thu, 04 Sep 2014 12:00:17 +0200 |
Sascha L. Teichmann |
Remove dead class.
|
Thu, 04 Sep 2014 11:15:34 +0200 |
Raimund Renkert |
merged.
|
Thu, 04 Sep 2014 11:14:24 +0200 |
Raimund Renkert |
Changed discharge processor to plot only discharge curves and added processor for computed discharge curves.
|
Thu, 04 Sep 2014 11:10:37 +0200 |
Raimund Renkert |
Added new processor to plot misc discharge data, e.g. from datacage or recommendations.
|
Wed, 03 Sep 2014 18:21:35 +0200 |
Tom Gottfried |
The existing implementation respects the fact that months are 0-based.
|
Wed, 03 Sep 2014 16:46:09 +0200 |
Tom Gottfried |
Complete CSV-export and correct headers.
|
Wed, 03 Sep 2014 10:24:39 +0200 |
Tom Gottfried |
Rev aa80f9ba56a9 was incomplete. Shame on me.
|
Wed, 03 Sep 2014 09:55:32 +0200 |
Tom Gottfried |
We have to calculate bed load plus suspended sand instead of suspended load.
|
Tue, 02 Sep 2014 17:47:03 +0200 |
Tom Gottfried |
Let epochs be averages over their years.
|
Tue, 02 Sep 2014 17:10:22 +0200 |
Tom Gottfried |
Precalculated sums from the database will come through recommendations.
|
Tue, 02 Sep 2014 14:46:20 +0200 |
Tom Gottfried |
Make sedimentload loadable as old calculation.
|
Mon, 01 Sep 2014 17:50:22 +0200 |
Tom Gottfried |
Only calculated sums of fractions should be initially shown in diagram.
|
Mon, 01 Sep 2014 12:34:39 +0200 |
Tom Gottfried |
Fix fraction respectively facet names and descriptions.
|
Mon, 01 Sep 2014 10:15:57 +0200 |
Tom Gottfried |
Broken -> broke away.
|
Mon, 01 Sep 2014 10:09:53 +0200 |
Tom Gottfried |
Do not handle the impossible.
|
Mon, 01 Sep 2014 09:43:55 +0200 |
Tom Gottfried |
Handle missing years in bed height differences without assuming an unknown year to be BC 1.
|
Fri, 29 Aug 2014 17:00:26 +0200 |
Sascha L. Teichmann |
Converted configuration for discharge diagrams to the new Q symmetry style.
|
Fri, 29 Aug 2014 16:42:58 +0200 |
Sascha L. Teichmann |
Added diagram defaults for discharge diagrams.
|
Fri, 29 Aug 2014 16:24:12 +0200 |
Sascha L. Teichmann |
Renamed tag in sq relation defaults to a more fitting name.
|
Fri, 29 Aug 2014 16:21:31 +0200 |
Sascha L. Teichmann |
Added new diagramm generator for Q symmetry.
|
Fri, 29 Aug 2014 15:44:08 +0200 |
Sascha L. Teichmann |
More shoveling araound generators.
|
Fri, 29 Aug 2014 15:22:33 +0200 |
Sascha L. Teichmann |
Added a woking copy for discharge diagramm generators. All modifications are go in here. If the process is finished we'll remove the old one and rename the copy to discharge-diagramms.xml
|
Fri, 29 Aug 2014 13:03:11 +0200 |
Tom Gottfried |
We have only 4 of them.
|
Fri, 29 Aug 2014 12:42:00 +0200 |
Sascha L. Teichmann |
More fixes for conf.xml
|
Fri, 29 Aug 2014 12:27:35 +0200 |
Sascha L. Teichmann |
Moved external system entites back to conf.xml. Uncool.
|
Fri, 29 Aug 2014 11:56:10 +0200 |
Sascha L. Teichmann |
Cleaned up generator dependencies.
|
Fri, 29 Aug 2014 11:43:15 +0200 |
Sascha L. Teichmann |
Moved more generator stuff in reguarding sub directory.
|
Fri, 29 Aug 2014 11:31:17 +0200 |
Sascha L. Teichmann |
Allow deeper nesting of output-generators in conf.xml. This allows better separation of concerns of different generator types.
|
Fri, 29 Aug 2014 11:24:52 +0200 |
Sascha L. Teichmann |
Moved generators.xml and its dependencies to a directory of their own.
|
Fri, 29 Aug 2014 11:21:35 +0200 |
Sascha L. Teichmann |
Moved external system entity for longitudinal sections default to generators.xml. TODO: Move in entirely different file.
|
Fri, 29 Aug 2014 11:03:38 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
Fri, 29 Aug 2014 10:49:38 +0200 |
Sascha L. Teichmann |
Fixed build error.
|
Fri, 29 Aug 2014 09:25:00 +0200 |
Tom Gottfried |
The relevant contents are now in artifacts/doc/datacage_ref_de.rst.
|
Thu, 28 Aug 2014 18:42:20 +0200 |
Tom Gottfried |
IDs can be assumed to be unique.
|
Thu, 28 Aug 2014 15:34:57 +0200 |
Tom Gottfried |
Do not put metadata on series if there are none (avoid NPE).
|
Thu, 28 Aug 2014 12:00:52 +0200 |
Tom Gottfried |
Quoting is done elsewhere since rev 7021753b3797.
|
Wed, 27 Aug 2014 19:52:51 +0200 |
Tom Gottfried |
The rest is silence.
|
Wed, 27 Aug 2014 16:47:38 +0200 |
Sascha L. Teichmann |
Make Logarithmic axis immun against negative values (not throwing Exceptions in that case).
|
Wed, 27 Aug 2014 15:09:45 +0200 |
Tom Gottfried |
Let the facet know the period of it's data.
|
Wed, 27 Aug 2014 15:01:54 +0200 |
Tom Gottfried |
Calculate all single years in given interval but only once.
|
Tue, 26 Aug 2014 17:21:42 +0200 |
Sascha L. Teichmann |
Merged.
|
Tue, 26 Aug 2014 17:21:16 +0200 |
Sascha L. Teichmann |
Datacage: Insert variable values literally into output.
|
Tue, 26 Aug 2014 17:16:21 +0200 |
Tom Gottfried |
With the exception of real calculation results, descriptions of sediment loads can all follow the same pattern.
|
Tue, 26 Aug 2014 12:09:18 +0200 |
Tom Gottfried |
Metadata in datacage tooltips for sediment densities, bed heights, flow velocities and sounding widhts.
|
Tue, 26 Aug 2014 11:35:47 +0200 |
Sascha L. Teichmann |
Added missing generics parameter.
|
Tue, 26 Aug 2014 11:28:03 +0200 |
Sascha L. Teichmann |
Sediment load: Remove simple tail recursive calls from SedimentLoadData.recursiveFindStations(). More carefully this time.
|
Tue, 26 Aug 2014 11:18:03 +0200 |
Sascha L. Teichmann |
Removed obsolete same package imports.
|
Tue, 26 Aug 2014 11:16:21 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
Mon, 25 Aug 2014 20:12:11 +0200 |
Andre Heinecke |
Fix exporter loops
|
Mon, 25 Aug 2014 20:03:35 +0200 |
Andre Heinecke |
Acctually use the new Sedilmentload calculation
|
Mon, 25 Aug 2014 20:02:28 +0200 |
Andre Heinecke |
Make SedimentloadExporter work with the new result scheme.
|
Mon, 25 Aug 2014 20:01:44 +0200 |
Andre Heinecke |
Correctly handle not creating facets and error reports.
|
Mon, 25 Aug 2014 20:00:45 +0200 |
Andre Heinecke |
GetFractionByName now returns a list as it can differ in Epochs
|
Mon, 25 Aug 2014 19:59:14 +0200 |
Andre Heinecke |
Add period to sedimentloaddataresult fraction
|
Mon, 25 Aug 2014 19:58:00 +0200 |
Andre Heinecke |
Use old names for SedimentloadDataFractions and add average fraction
|
Mon, 25 Aug 2014 17:28:48 +0200 |
Andre Heinecke |
Actually return the period in SedimentLoadAccess
|
Mon, 25 Aug 2014 17:28:18 +0200 |
Andre Heinecke |
Fix compilation of last commit
|
Mon, 25 Aug 2014 17:14:49 +0200 |
Sascha L. Teichmann |
Another fix for find stations in sediment load.
|
Mon, 25 Aug 2014 16:04:35 +0200 |
Andre Heinecke |
Correctly output problems in SedimentLoadDataCalculate
|
Mon, 25 Aug 2014 15:56:09 +0200 |
Andre Heinecke |
(issue1448) Add WIP SedimentLoadDataFacet and use it in calculation.
|
Mon, 25 Aug 2014 12:18:35 +0200 |
Andre Heinecke |
(issue 1448) Use new data model for sedimentloadinfo
|
Mon, 25 Aug 2014 12:05:37 +0200 |
Sascha L. Teichmann |
Sediment load: Fixed findStations() and add findLoads().
|
Fri, 22 Aug 2014 18:00:35 +0200 |
Tom Gottfried |
Tooltip for sediment loads in datacage.
|
Fri, 22 Aug 2014 17:43:36 +0200 |
Tom Gottfried |
Add SQ time interval to selection tree in datacage for sediment loads.
|
Fri, 22 Aug 2014 13:19:02 +0200 |
Tom Gottfried |
Remove code duplications in sedimentload datacage.
|
Fri, 22 Aug 2014 08:04:43 +0200 |
Tom Gottfried |
Format timestamps in datacage tooltip for porosities.
|
Thu, 21 Aug 2014 18:58:10 +0200 |
Tom Gottfried |
Dashed lines shall be used for sediment load at measurement stations (issue1352).
|
Thu, 21 Aug 2014 18:09:37 +0200 |
Tom Gottfried |
Complete mapping and themes for sediment load.
|
Thu, 21 Aug 2014 15:48:01 +0200 |
Tom Gottfried |
Make a difference between themes representing loads in different units.
|
Wed, 20 Aug 2014 17:54:12 +0200 |
Tom Gottfried |
i18n for sediment loads.
|
Wed, 20 Aug 2014 17:47:58 +0200 |
Tom Gottfried |
Reconstruct facet description of sediment load longitudinal sections. i18n will follow.
|
Wed, 20 Aug 2014 17:07:17 +0200 |
Tom Gottfried |
Reconstruct facet description of sediment load at measurement stations. i18n will follow.
|
Wed, 20 Aug 2014 14:53:29 +0200 |
Tom Gottfried |
Let hg ignore downloaded SmartGWT stuff.
|
Wed, 20 Aug 2014 14:26:42 +0200 |
Andre Heinecke |
Change facet.sedimentload.dc to facet.sedimentload.ls
|
Wed, 20 Aug 2014 13:17:20 +0200 |
Andre Heinecke |
(issue1681) Add l10n for grain fractions
|
Wed, 20 Aug 2014 13:17:03 +0200 |
Andre Heinecke |
(issue1681) Handle different grain fraction kinds
|
Wed, 20 Aug 2014 12:59:01 +0200 |
Andre Heinecke |
Fix typo in sedimentload i18n
|
Wed, 20 Aug 2014 12:55:55 +0200 |
Andre Heinecke |
(issue1681) Add themes for sedimentloads
|
Wed, 20 Aug 2014 12:12:18 +0200 |
Andre Heinecke |
Remove todos about sedimentload_ls facet
|
Wed, 20 Aug 2014 12:10:59 +0200 |
Andre Heinecke |
Remove unecessary debut output
|
Wed, 20 Aug 2014 12:10:32 +0200 |
Andre Heinecke |
Configure SedimentLoadLSFacet
|
Wed, 20 Aug 2014 12:09:41 +0200 |
Andre Heinecke |
Add SedimentLoadLSFacet
|
Wed, 20 Aug 2014 12:00:50 +0200 |
Andre Heinecke |
Add getSedimentLoadById accessor
|
Tue, 19 Aug 2014 18:46:13 +0200 |
Tom Gottfried |
Distinction by measurement station gives lots of duplicates, as we always get a whole longitudinal section.
|
Fri, 15 Aug 2014 18:56:02 +0200 |
Andre Heinecke |
Fix binarysearch logic in SedimentLoadData
|
Fri, 15 Aug 2014 18:42:39 +0200 |
Andre Heinecke |
Add translation for sedimentloads
|
Fri, 15 Aug 2014 18:27:19 +0200 |
Andre Heinecke |
Add new and simplyfied SedimentLoadFacet
|
Fri, 15 Aug 2014 18:25:43 +0200 |
Andre Heinecke |
Fix ti_stop_time naming
|
Fri, 15 Aug 2014 18:24:55 +0200 |
Andre Heinecke |
Change sedimentload factory from yields to loads.
|
Fri, 15 Aug 2014 18:21:10 +0200 |
Andre Heinecke |
Configure sedimentload static facet
|
Fri, 15 Aug 2014 18:10:16 +0200 |
Andre Heinecke |
Rename the SedimentLoadDataFacet and add deprection comment
|
Fri, 15 Aug 2014 18:09:47 +0200 |
Andre Heinecke |
Revert accidental change.
|
Fri, 15 Aug 2014 18:09:08 +0200 |
Andre Heinecke |
Expose sedimentLoad stations
|
Fri, 15 Aug 2014 18:03:41 +0200 |
Andre Heinecke |
merge
|
Fri, 15 Aug 2014 14:28:26 +0200 |
Andre Heinecke |
Move the old data facet out of the way.
|
Fri, 15 Aug 2014 18:01:06 +0200 |
Sascha L. Teichmann |
Use list() instead of iterator(). Why does this not work?
|
Mon, 11 Aug 2014 18:34:21 +0200 |
Andre Heinecke |
Add comment on how to obtain smartgwt
|
Mon, 11 Aug 2014 18:33:50 +0200 |
Andre Heinecke |
Do not try to load empty files.
|
Tue, 12 Aug 2014 10:57:53 +0200 |
Sascha L. Teichmann |
Be more tolerant with not existing artifact configurations.
|
Mon, 11 Aug 2014 17:18:36 +0200 |
Sascha L. Teichmann |
Added the broken calculation state of the new sediment load calc.
|
Mon, 11 Aug 2014 16:45:42 +0200 |
Sascha L. Teichmann |
Removed same package import.
|
Mon, 11 Aug 2014 16:43:56 +0200 |
Sascha L. Teichmann |
Removed obsolete import.
|
Mon, 11 Aug 2014 16:42:31 +0200 |
Sascha L. Teichmann |
Merged
|
Mon, 11 Aug 2014 16:41:15 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
Mon, 11 Aug 2014 15:41:12 +0200 |
Andre Heinecke |
Build is locale sensitive. Force a UTF-8 locale for building.
|
Fri, 08 Aug 2014 13:24:11 +0200 |
Tom Gottfried |
Datacage config for new sediment load structures. Missing: some facets and everything down from the innermost macros for sediment load at measurement stations.
|
Thu, 07 Aug 2014 20:03:44 +0200 |
Sascha L. Teichmann |
Added $RADIUS zoom scale sub title logic to other diagrams.
|
Thu, 07 Aug 2014 19:59:08 +0200 |
Tom Gottfried |
Some typos in datacage config reference.
|
Thu, 07 Aug 2014 19:56:15 +0200 |
Sascha L. Teichmann |
Fixed sub title zoom stuff.
|
Thu, 07 Aug 2014 17:26:18 +0200 |
Sascha L. Teichmann |
Merged
|
Thu, 07 Aug 2014 17:24:33 +0200 |
Sascha L. Teichmann |
flys/issue1262: Introduce variable $RADIUS to be used in user defined chart sub titles.
|
Thu, 07 Aug 2014 13:05:35 +0200 |
Tom Gottfried |
Cleaned layout for infolines (issue1635).
|
Wed, 06 Aug 2014 19:17:12 +0200 |
Tom Gottfried |
SCHEMA CHANGE: rename database tables from yield to load_ls according to respective classes.
|
Tue, 05 Aug 2014 18:28:04 +0200 |
Sascha L. Teichmann |
Parse meta data for multi attribute data.
|
Tue, 05 Aug 2014 18:03:45 +0200 |
Sascha L. Teichmann |
Added meta infos for multi items to enable client to order the columns in a defined order.
|
Tue, 05 Aug 2014 16:34:04 +0200 |
Sascha L. Teichmann |
More idiomatic Java string concat.
|
Thu, 31 Jul 2014 18:14:22 +0200 |
Sascha L. Teichmann |
Sediment load: transform units for official epochs, too.
|
Thu, 31 Jul 2014 17:04:41 +0200 |
Sascha L. Teichmann |
Sediment load: refactored epoch calculation to not average over all but per year.
|
Wed, 30 Jul 2014 19:26:20 +0200 |
Sascha L. Teichmann |
Sediment load: fetch sediment density for transforming t/a to m^3/a.
|
Wed, 30 Jul 2014 19:06:35 +0200 |
Sascha L. Teichmann |
Sediment load: Cached sediment values dont depend on year. The cached object is an index over year so there is not need to ask the factory for this.
|
Wed, 30 Jul 2014 18:54:14 +0200 |
Sascha L. Teichmann |
Sediment load: Ensure that the lists of values are always ordered station wise. This was a hidden bug. :-/
|
Wed, 30 Jul 2014 18:34:48 +0200 |
Sascha L. Teichmann |
Sediment density: Got rid of stupid extra year tracking.
|
Wed, 30 Jul 2014 16:50:26 +0200 |
Sascha L. Teichmann |
Sedimen load: Added bundle for fraction results.
|
Wed, 23 Jul 2014 18:19:15 +0200 |
Andre Heinecke |
Fix wsplgen name
|
Fri, 18 Jul 2014 18:55:39 +0200 |
Sascha L. Teichmann |
Sediment load: More of official epochs.
|
Fri, 18 Jul 2014 18:01:49 +0200 |
Tom Gottfried |
SCHEMA CHANGE and Importer: get time intervals of SQ-relations from metalines in sediment load files.
|
Fri, 18 Jul 2014 17:43:27 +0200 |
Sascha L. Teichmann |
Sediment load: Fetch kind of sediment load from database to tell if it is official or not.
|
Fri, 18 Jul 2014 16:05:21 +0200 |
Sascha L. Teichmann |
Sediment load: More on calculating epoch loads.
|
Fri, 18 Jul 2014 15:37:26 +0200 |
Tom Gottfried |
Importer: Import sediment load at measurement stations.
|
Fri, 18 Jul 2014 13:03:28 +0200 |
Sascha L. Teichmann |
Sediment load. More off year based calculations.
|
Fri, 18 Jul 2014 12:22:51 +0200 |
Tom Gottfried |
My hint that MeasurementStation does not know it's river was not true. Thus backout rev 8c14588d1f78.
|
Fri, 18 Jul 2014 11:58:59 +0200 |
Sascha L. Teichmann |
Sediment load: dispatch calculation modes.
|
Fri, 18 Jul 2014 11:16:50 +0200 |
Sascha L. Teichmann |
Sediment load: take arguments from sediment access.
|
Fri, 18 Jul 2014 11:05:34 +0200 |
Sascha L. Teichmann |
Sediment load access: Cache values.
|
Thu, 17 Jul 2014 18:22:16 +0200 |
Sascha L. Teichmann |
Sediment load: Added more 'sums' to be calculated.
|
Thu, 17 Jul 2014 16:51:18 +0200 |
Sascha L. Teichmann |
Sediment load: (incomplete) new sediment load calculation.
|
Thu, 17 Jul 2014 11:37:25 +0200 |
Sascha L. Teichmann |
Sediment Load: Added table to figure out where grain fractions are measured.
|
Thu, 17 Jul 2014 11:19:59 +0200 |
Sascha L. Teichmann |
Sediment load: Added join to fetch measurement station via ranges which know the river. Added a visitor for values, too.
|
Thu, 17 Jul 2014 10:56:38 +0200 |
Sascha L. Teichmann |
ImporterSession: Load measurement stations via ranges which hold a reference to the river.
|
Thu, 17 Jul 2014 07:46:18 +0200 |
Sascha L. Teichmann |
Merged.
|
Thu, 17 Jul 2014 07:45:14 +0200 |
Sascha L. Teichmann |
Sediment load: Merge measurement stations if they have the same km. The chaining was too complicated to build algorithms on top of it.
|
Wed, 16 Jul 2014 19:11:31 +0200 |
Tom Gottfried |
Divide SedimentLoadLSParser into AbstractSedimentLoadParser and SedimentLoadLSParser to be able to reuse code for a new SedimentLoadParser for data at measurement stations.
|
Wed, 16 Jul 2014 18:33:28 +0200 |
Sascha L. Teichmann |
Introduce LineParserException for CSV file parsing.
|
Wed, 16 Jul 2014 17:09:02 +0200 |
Sascha L. Teichmann |
Sediment load: Recognize grain fractions 'total', 'bed_load' and 'suspended_load' from pre-calculations.
|
Wed, 16 Jul 2014 16:03:50 +0200 |
Sascha L. Teichmann |
Replace station list with a plain array.
|
Wed, 16 Jul 2014 15:53:11 +0200 |
Sascha L. Teichmann |
Use GF_UNKNOWN constant instead of -1 to identify unknown grain fractions.
|
Wed, 16 Jul 2014 13:06:09 +0200 |
Sascha L. Teichmann |
Directly chain stations with the same km position together. This ease some summations.
|
Wed, 16 Jul 2014 11:55:46 +0200 |
Sascha L. Teichmann |
Added filters for loaded sediment data values. Year, Epochs (time ranges), And and Or.
|
Wed, 16 Jul 2014 11:05:59 +0200 |
Sascha L. Teichmann |
Throw out old visitor model and use grain fraction filters instead. Fixed neighborhood wirinng of measument stations.
|
Tue, 15 Jul 2014 21:31:11 +0200 |
Sascha L. Teichmann |
Sediment loads from cache are sorted in station order so range filters
|
Tue, 15 Jul 2014 18:52:22 +0200 |
Sascha L. Teichmann |
Wire the neighbors to the measurement stations together. This eases the lookup for same types (suspended or bed load).
|
Tue, 15 Jul 2014 12:47:52 +0200 |
Sascha L. Teichmann |
New way to loaded sediment loads from database and cache it. The data structure a way more straight forward. TODO: Implement calculation on this basis.
|
Mon, 14 Jul 2014 15:36:44 +0200 |
Tom Gottfried |
SCHEMA CHANGE and Importer (only longitudinal section data so far): only grain fractions given now in schema are valid. We are handling sediment loads, not yields.
|
Fri, 11 Jul 2014 13:10:05 +0200 |
Sascha L. Teichmann |
Renamed ImportSedimentYield to ImportSedimentLoadLS.
|
Fri, 11 Jul 2014 11:32:18 +0200 |
Sascha L. Teichmann |
Fix for flys/issue1735 (Versatz in den HYK-Dateien)
|
Thu, 10 Jul 2014 18:02:08 +0200 |
Sascha L. Teichmann |
Added method to importer session to fetch the measurement station for given (river, km).
|
Thu, 10 Jul 2014 16:57:32 +0200 |
Sascha L. Teichmann |
Added importer models for sediment load and sediment load values.
|
Thu, 10 Jul 2014 16:11:55 +0200 |
Sascha L. Teichmann |
Load grain fractions from database only. Do not store new ones.
|
Thu, 10 Jul 2014 12:04:56 +0200 |
Sascha L. Teichmann |
Added Hibernate mappings for new sediment load database model.
|
Wed, 09 Jul 2014 18:13:13 +0200 |
Sascha L. Teichmann |
Renamed SedimentYield to SedimentLoadLS and SedimentYieldValue to SedimentLoadLSValue. Adjust the names of the parsers and the rest of the glue.
|
Wed, 09 Jul 2014 17:33:57 +0200 |
Sascha L. Teichmann |
Renamed SedimentLoad to SedimentLoadLSData to make place for SedimentLoad in backend.
|
Wed, 09 Jul 2014 17:10:18 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
Wed, 09 Jul 2014 16:38:29 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
Wed, 09 Jul 2014 16:03:04 +0200 |
Sascha L. Teichmann |
Merged
|
Wed, 09 Jul 2014 16:01:48 +0200 |
Sascha L. Teichmann |
Support the "new" HYK format which enables setting the end of the last flow zone.
|
Wed, 09 Jul 2014 15:56:15 +0200 |
Tom Gottfried |
Repair last commit.
|
Wed, 09 Jul 2014 15:51:31 +0200 |
Tom Gottfried |
SCHEMA CHANGE: consistent naming scheme and drop script for sediment load at measurement stations.
|
Tue, 08 Jul 2014 19:44:54 +0200 |
Tom Gottfried |
SCHEMA CHANGE: Added new structure for sediment loads measured at measurement stations.
|
Tue, 08 Jul 2014 18:47:40 +0200 |
Tom Gottfried |
Close branch facet-metadata. It's all in default now.
facet-metadata
|
Tue, 08 Jul 2014 18:37:27 +0200 |
Tom Gottfried |
Merged branch facet-metadata into default.
|
Tue, 08 Jul 2014 18:19:04 +0200 |
Tom Gottfried |
merged default into branch facet-metadata.
facet-metadata
|
Fri, 04 Jul 2014 09:11:37 +0200 |
Raimund Renkert |
Updated german i18n strings.
facet-metadata
|
Thu, 03 Jul 2014 17:21:22 +0200 |
Raimund Renkert |
merged.
facet-metadata
|
Thu, 03 Jul 2014 17:20:37 +0200 |
Raimund Renkert |
Write an empty string if year is 0 in middle bedheight exporter.
facet-metadata
|
Thu, 03 Jul 2014 17:17:28 +0200 |
Raimund Renkert |
Updated german i18n string.
facet-metadata
|
Thu, 03 Jul 2014 16:36:43 +0200 |
Tom Gottfried |
Allow differences between years and epochs (accidentally did that in branch facet-metadata already too)
|
Thu, 03 Jul 2014 16:34:28 +0200 |
Tom Gottfried |
Allow differences between years and epochs.
facet-metadata
|
Thu, 03 Jul 2014 13:47:42 +0200 |
Raimund Renkert |
Fixed i18n strings.
facet-metadata
|
Thu, 03 Jul 2014 13:27:14 +0200 |
Raimund Renkert |
Avoid NPE if some meta data does not exist.
facet-metadata
|
Thu, 03 Jul 2014 12:31:13 +0200 |
Raimund Renkert |
Added i18n strings for middle bedheights.
facet-metadata
|
Thu, 03 Jul 2014 12:30:41 +0200 |
Raimund Renkert |
Added macro for middle bedheights for old calculations.
facet-metadata
|
Thu, 03 Jul 2014 11:34:46 +0200 |
Raimund Renkert |
Added i18n strings.
facet-metadata
|
Thu, 03 Jul 2014 11:34:30 +0200 |
Raimund Renkert |
Removed unused imports and avoid using RiverUtils.
facet-metadata
|
Thu, 03 Jul 2014 11:33:41 +0200 |
Raimund Renkert |
Fixed NPE when loading folders from datacage.
facet-metadata
|
Thu, 03 Jul 2014 11:32:22 +0200 |
Raimund Renkert |
Translate csv meta data lines in middle bed height chart export.
facet-metadata
|
Thu, 03 Jul 2014 11:31:26 +0200 |
Raimund Renkert |
Add river elevation model to middle bed height csv export.
facet-metadata
|
Thu, 03 Jul 2014 11:30:19 +0200 |
Raimund Renkert |
Fixed i18n strings.
facet-metadata
|
Thu, 03 Jul 2014 11:27:41 +0200 |
Raimund Renkert |
Add river elevation model to bed diff chart export.
facet-metadata
|
Wed, 02 Jul 2014 16:35:23 +0200 |
Tom Gottfried |
Allow building Release from specific branch. Beware that branches to not get different ports automatically.
|
Wed, 02 Jul 2014 15:54:23 +0200 |
Raimund Renkert |
Added missing facet.
facet-metadata
|
Wed, 02 Jul 2014 14:42:43 +0200 |
Raimund Renkert |
Add meta data to middle bed height CSV export.
facet-metadata
|
Wed, 02 Jul 2014 14:42:07 +0200 |
Raimund Renkert |
Added som more meta data to middle bed height result.
facet-metadata
|
Wed, 02 Jul 2014 12:34:52 +0200 |
Raimund Renkert |
Separate meta data key and value by ':'.
facet-metadata
|
Wed, 02 Jul 2014 12:34:06 +0200 |
Raimund Renkert |
Removed unused importsRemoved unused imports..
facet-metadata
|
Wed, 02 Jul 2014 12:33:43 +0200 |
Raimund Renkert |
Add meta data to chart series in sq relation.
facet-metadata
|
Wed, 02 Jul 2014 12:32:59 +0200 |
Raimund Renkert |
Add units as meta data to middle bed height facets.
facet-metadata
|
Wed, 02 Jul 2014 12:31:57 +0200 |
Raimund Renkert |
Updated meta data in facets.
facet-metadata
|
Wed, 02 Jul 2014 09:31:14 +0200 |
Raimund Renkert |
Split bed quality facets and updated processors and state.
facet-metadata
|
Wed, 02 Jul 2014 09:29:39 +0200 |
Raimund Renkert |
Removed debug output.
facet-metadata
|
Tue, 01 Jul 2014 15:09:56 +0200 |
Raimund Renkert |
Split bed differences facet into data specific facets.
facet-metadata
|
Tue, 01 Jul 2014 13:27:53 +0200 |
Raimund Renkert |
Bedheight facet now returns double[][]. Removed obsolete processor code.
facet-metadata
|
Tue, 01 Jul 2014 13:25:46 +0200 |
Raimund Renkert |
Moved MiddleBedHeight classes to minfo package. Facet now returns double[][] data.
facet-metadata
|
Tue, 01 Jul 2014 13:11:43 +0200 |
Raimund Renkert |
Fixed some smartgwt 4.1 related issues.
|
Mon, 30 Jun 2014 11:29:45 +0200 |
Raimund Renkert |
merged with default.
facet-metadata
|
Fri, 27 Jun 2014 19:28:08 +0200 |
Tom Gottfried |
Added tag 3.1.4 for changeset 6fef38a526c7
|
Fri, 27 Jun 2014 19:25:29 +0200 |
Tom Gottfried |
There is no year/epoche choice anymore for bed differences.
3.1.4
|
Fri, 27 Jun 2014 18:47:55 +0200 |
Tom Gottfried |
Exclude annotation types without trailing unit (assumed after whitespace).
|
Fri, 27 Jun 2014 16:52:00 +0200 |
Sascha L. Teichmann |
Removed obsolete XPath expression.
|
Fri, 27 Jun 2014 15:52:05 +0200 |
Tom Gottfried |
Minor cleanup in meta-data.xml.
|
Fri, 27 Jun 2014 15:10:10 +0200 |
Raimund Renkert |
Select complete differences matrix to have a well sorted dc-tree.
|
Fri, 27 Jun 2014 13:05:34 +0200 |
Raimund Renkert |
Removed code that ignores a user subtitle and sets a default subtitle.
|
Fri, 27 Jun 2014 09:50:46 +0200 |
Raimund Renkert |
Fixed datacage info field for bed height differences.
|
Thu, 26 Jun 2014 15:00:28 +0200 |
Raimund Renkert |
merged.
|
Thu, 26 Jun 2014 14:59:28 +0200 |
Raimund Renkert |
Changed twin dc panel in bed height deifferences to single dc and use the new differences dc macro.
|
Thu, 26 Jun 2014 14:54:04 +0200 |
Raimund Renkert |
Updated macros and db statement for minfo bedheight differences.
|
Thu, 26 Jun 2014 13:00:18 +0200 |
Sascha L. Teichmann |
Datacage function resolver: Declare static functions static.
|
Thu, 26 Jun 2014 12:54:31 +0200 |
Sascha L. Teichmann |
Added dc:coalesce(a, b). Returns first element which is not empty or not zero.
|
Thu, 26 Jun 2014 12:44:40 +0200 |
Sascha L. Teichmann |
Added dc:lowercase() dc:uppercase()
|
Wed, 25 Jun 2014 15:40:44 +0200 |
Raimund Renkert |
Set identifier for listgridfields and resized columns.
|
Tue, 24 Jun 2014 16:02:41 +0200 |
Tom Gottfried |
issue1633: Add missing info line.
|
Fri, 20 Jun 2014 16:52:14 +0200 |
Sascha L. Teichmann |
DC: Flatten bed height diff tree a bit.
|
Fri, 20 Jun 2014 16:41:30 +0200 |
Sascha L. Teichmann |
DC: Group bedheight diffs by both years.
|
Fri, 20 Jun 2014 16:33:36 +0200 |
Raimund Renkert |
merged.
|
Fri, 20 Jun 2014 16:33:09 +0200 |
Raimund Renkert |
New macros for bed height differneces.
|