| Wed, 30 Oct 2013 15:26:21 +0100 |
Sascha L. Teichmann |
Experimental caching of datacage recommendations. The respective hook is called a lot and running the datacage over and over again when loading data can be expensive. So the generated recommendations are cached for some time.
|
| Wed, 30 Oct 2013 15:02:16 +0100 |
Felix Wolfsteller |
issue1512: Fix loading of all former flow vel. calculation via folder.
|
| Wed, 30 Oct 2013 14:53:26 +0100 |
Felix Wolfsteller |
issue1512: Show all flowvelocity facet in former calc. flow vel. part of dc.
|
| Wed, 30 Oct 2013 12:24:03 +0100 |
Felix Wolfsteller |
issue1571: i18n.
|
| Wed, 30 Oct 2013 12:03:07 +0100 |
Felix Wolfsteller |
issue1572: Call longitudinal-section-user-prototype for bedheight-diffs/year.
|
| Wed, 30 Oct 2013 11:59:09 +0100 |
Sascha L. Teichmann |
Merged
|
| Wed, 30 Oct 2013 11:58:57 +0100 |
Sascha L. Teichmann |
Datacage: Remove tree branches vom datacage tree on client side which do not contain loadable data.
|
| Wed, 30 Oct 2013 11:57:04 +0100 |
Sascha L. Teichmann |
Simplified recommendattion monitor code a bit.
|
| Wed, 30 Oct 2013 11:56:13 +0100 |
Sascha L. Teichmann |
Code cleanup.
|
| Wed, 30 Oct 2013 11:55:10 +0100 |
Sascha L. Teichmann |
Fix for flys/issue1654: Divide through denisity, do not multiply.
|
| Tue, 29 Oct 2013 19:59:59 +0100 |
Tom Gottfried |
Schema change: add lookup table for sediment yield kinds to have its values documented.
|
| Tue, 29 Oct 2013 19:46:41 +0100 |
Sascha L. Teichmann |
flys/issue1625: Changed default sediment density factor from 1.8 to 1.9 . The value can be changed by adusting conf.xml (/artifact-databae/options/sediment-density-factor/text()).
|
| Tue, 29 Oct 2013 19:17:28 +0100 |
Tom Gottfried |
Importer: document where annotations are searched for.
|
| Tue, 29 Oct 2013 18:57:40 +0100 |
Tom Gottfried |
run_geo.sh: allow logging as documented.
|
| Tue, 29 Oct 2013 11:32:56 +0100 |
Felix Wolfsteller |
issue1397: Fix reference_curve former calculations in dc.
|
| Tue, 29 Oct 2013 11:31:59 +0100 |
Felix Wolfsteller |
dc i18n.
|
| Tue, 29 Oct 2013 10:42:12 +0100 |
Felix Wolfsteller |
issue1512: Repair loading all of flowvelocitymeasurements by not equipping
|
| Mon, 28 Oct 2013 15:46:26 +0100 |
Andre Heinecke |
inor Layout + Wiki
|
| Mon, 28 Oct 2013 14:22:02 +0100 |
Andre Heinecke |
Rechtschreibkorrektur (durchgeführt von Bettina)
|
| Mon, 28 Oct 2013 14:15:53 +0100 |
Andre Heinecke |
More installation documentation
|
| Mon, 28 Oct 2013 12:14:46 +0100 |
Felix Wolfsteller |
issue1345: Sort sediment densities by year.
|
| Mon, 28 Oct 2013 11:52:14 +0100 |
Felix Wolfsteller |
meta-data.xml: Simplify query for densities a bit, sort by depth.
|
| Sun, 27 Oct 2013 17:30:38 +0100 |
Andre Heinecke |
Start installation documentation for specific client installation
|
| Fri, 25 Oct 2013 17:06:30 +0200 |
Tom Gottfried |
Importer doc: fix some outdated or wrong infos.
|
| Fri, 25 Oct 2013 16:57:15 +0200 |
Tom Gottfried |
Importer and doc: Warn instead of die if AT- or STA-file is missing for a gauge.
|
| Fri, 25 Oct 2013 14:32:11 +0200 |
Felix Wolfsteller |
FacetTypes: Cosmetics.
|
| Fri, 25 Oct 2013 14:31:56 +0200 |
Felix Wolfsteller |
Declare certain bedheight-diagrams as charttypes, for manual points.
|
| Fri, 25 Oct 2013 14:29:38 +0200 |
Felix Wolfsteller |
meta-data.xml: Include bedheight-diffs per year in minfo-user-dc.
|
| Fri, 25 Oct 2013 14:10:29 +0200 |
Felix Wolfsteller |
meta-data.xml: Subsume the different bed-quality dc-nodes.
|
| Fri, 25 Oct 2013 13:53:48 +0200 |
Felix Wolfsteller |
i18n for dc added.
|
| Fri, 25 Oct 2013 13:52:47 +0200 |
Felix Wolfsteller |
meta-data.xml: Ease i18nability.
|
| Fri, 25 Oct 2013 15:39:59 +0200 |
Tom Gottfried |
Geoimporter: be case-insensitive when looking for floodplains.
|
| Fri, 25 Oct 2013 15:02:08 +0200 |
Tom Gottfried |
make-opt-package.sh: give path to internal 'repository'.
|
| Fri, 25 Oct 2013 07:25:19 +0200 |
Felix Wolfsteller |
meta-data.xml: Remove duplicates and 'special' macros fro special outs from
|
| Fri, 25 Oct 2013 07:24:15 +0200 |
Felix Wolfsteller |
meta-data.xml: Remove delta-wt from longitudinal-section-user-prototype .
|
| Fri, 25 Oct 2013 07:16:16 +0200 |
Felix Wolfsteller |
Fix Typo in german i18n (e.g. issue1345) .
|
| Wed, 23 Oct 2013 17:45:56 +0200 |
Felix Wolfsteller |
Partly revert rev 7419, conservative guess about which "outs" are handcrafted.
|
| Fri, 25 Oct 2013 03:47:04 +0200 |
Sascha L. Teichmann |
Experimental patch: Do not run datacage on artifacts that are loaded from datacage. His hopefully minimizes the datacage runs when a lot of data is loaded.
|
| Thu, 24 Oct 2013 23:06:40 +0200 |
Tom Gottfried |
Importer doc: fix some layout issues.
|
| Wed, 23 Oct 2013 17:20:55 +0200 |
Felix Wolfsteller |
Made SedimentDensityValue Serializable.
|
| Wed, 23 Oct 2013 17:20:30 +0200 |
Felix Wolfsteller |
issue1345: Re-enable sediment load total loads, now that factory is fixed.
|
| Wed, 23 Oct 2013 17:19:30 +0200 |
Felix Wolfsteller |
Fix total sediment load fetching.
|
| Wed, 23 Oct 2013 17:08:07 +0200 |
Felix Wolfsteller |
issue1345: Showing sediment densitie by depth, comment total load.
|
| Wed, 23 Oct 2013 14:53:47 +0200 |
Tom Gottfried |
Fix typo.
|
| Wed, 23 Oct 2013 12:43:26 +0200 |
Andre Heinecke |
(issue965) Handle the case that diffids are not available
|
| Wed, 23 Oct 2013 12:09:36 +0200 |
Felix Wolfsteller |
meta-data.xml: Be less restrictive in showing facets from waterlevels-discharge.
|
| Wed, 23 Oct 2013 12:08:30 +0200 |
Felix Wolfsteller |
meta-data.xml: Exclude empty.facet s.
|
| Wed, 23 Oct 2013 12:07:35 +0200 |
Felix Wolfsteller |
meta-meta.xml: Also fetch extreme_base curves via dc.
|
| Wed, 23 Oct 2013 12:07:05 +0200 |
Felix Wolfsteller |
meta-data.xml: cosmetics.
|
| Wed, 23 Oct 2013 11:41:24 +0200 |
Felix Wolfsteller |
Add another axis (height) to longitudinal-diagram-defaults.
|
| Wed, 23 Oct 2013 11:33:31 +0200 |
Felix Wolfsteller |
meta-data.xml: Cosmetics.
|
| Wed, 23 Oct 2013 11:22:47 +0200 |
Felix Wolfsteller |
meta-data.xml: More usage of collection-group-macro.
|
| Wed, 23 Oct 2013 11:28:25 +0200 |
Sascha L. Teichmann |
Datacage: Consequently call macro 'longitudinal-section-user-prototype' in all longitudinal sections of old calculation. Moved asymmeterical stuff to prototype. This may crash!
|
| Wed, 23 Oct 2013 11:04:06 +0200 |
Felix Wolfsteller |
meta-data.xml: Create and use collection-group macro.
|
| Wed, 23 Oct 2013 09:59:46 +0200 |
Tom Gottfried |
BedHeightSingleParser: fix no-data-line detection.
|
| Wed, 23 Oct 2013 08:20:11 +0200 |
Sascha L. Teichmann |
Datacage ref doc: More docs on functions.
|
| Tue, 22 Oct 2013 17:00:47 +0200 |
Sascha L. Teichmann |
Datacage ref doc: More docs for functions.
|
| Tue, 22 Oct 2013 16:24:08 +0200 |
Felix Wolfsteller |
issue1205: made SedimentDensity serializable.
|
| Tue, 22 Oct 2013 15:51:33 +0200 |
Felix Wolfsteller |
meta-data.xml: Switch more longitudinal-section like user-dc content to prototype macro.
|
| Tue, 22 Oct 2013 15:43:13 +0200 |
Sascha L. Teichmann |
Datacage: Fixed macro call.
|
| Tue, 22 Oct 2013 15:34:51 +0200 |
Sascha L. Teichmann |
Fixed meta-data.xml
|
| Tue, 22 Oct 2013 15:07:24 +0200 |
Sascha L. Teichmann |
Datacage ref doc: More doc for functions.
|
| Tue, 22 Oct 2013 12:21:21 +0200 |
Felix Wolfsteller |
issue1512: Sort flow-velocity-models by discharge_zone.value.
|
| Tue, 22 Oct 2013 12:15:33 +0200 |
Felix Wolfsteller |
issue1473: Show differences project name in dc.
|
| Tue, 22 Oct 2013 11:57:17 +0200 |
Felix Wolfsteller |
meta-data.xml: Fix referenced out for discharge_longitudinal_section.
|
| Mon, 21 Oct 2013 19:05:41 +0200 |
Andre Heinecke |
(issue965) Add a comment to explain what we do here
|
| Mon, 21 Oct 2013 18:57:30 +0200 |
Andre Heinecke |
(issue965) Use new datacage magic to have year filtering for bedheights
|
| Mon, 21 Oct 2013 17:54:34 +0200 |
Tom Gottfried |
Importer doc: mention flow direction retrieval from WST.
|
| Mon, 21 Oct 2013 17:43:01 +0200 |
Sascha L. Teichmann |
Removed dc:to-date(). Added 'date' type for <dc:convert> instead.
|
| Mon, 21 Oct 2013 12:21:40 +0200 |
Felix Wolfsteller |
issue1521: Adhere more to dc 'spec', show discharges of flow velocity models.
|
| Mon, 21 Oct 2013 12:22:40 +0200 |
Sascha L. Teichmann |
Datacage reference doc: Explain dc:container-context and dc:properties.
|
| Mon, 21 Oct 2013 11:43:50 +0200 |
Sascha L. Teichmann |
Datacage: Added TODOs for new functions in ref document.
|
| Mon, 21 Oct 2013 11:28:14 +0200 |
Felix Wolfsteller |
issue1512: Make double entry of Q facet for flowvelocities dissappear.
|
| Fri, 18 Oct 2013 16:41:10 +0200 |
Felix Wolfsteller |
Fix typo in german i18n.
|
| Fri, 18 Oct 2013 12:20:55 +0200 |
Felix Wolfsteller |
issue1512: improved i18n for flow velocity measurement facets.
|
| Thu, 17 Oct 2013 16:15:14 +0200 |
Felix Wolfsteller |
BedHeightProcessor: Finally display heights, not widths.
|
| Thu, 17 Oct 2013 15:36:13 +0200 |
Felix Wolfsteller |
BedHeightProcessor: Set axis label.
|
| Thu, 17 Oct 2013 15:36:00 +0200 |
Felix Wolfsteller |
BedHeight(Sounding)Processor: Use FacetTypes.
|
| Thu, 17 Oct 2013 15:23:07 +0200 |
Felix Wolfsteller |
Removed debris.
|
| Thu, 17 Oct 2013 15:21:57 +0200 |
Felix Wolfsteller |
Moved BedHeightEpoch to BedHeightEpochData.
|
| Thu, 17 Oct 2013 15:08:59 +0200 |
Felix Wolfsteller |
Renamed artifacts/**/BedHeight(Single) to BedHeight(Single)Data, to resolve
|
| Thu, 17 Oct 2013 11:12:14 +0200 |
Felix Wolfsteller |
Stub for new BedHeightProcessor.
|
| Thu, 17 Oct 2013 10:53:34 +0200 |
Felix Wolfsteller |
BedHeightSoundingProcessor: Log if data is now handled.
|
| Thu, 17 Oct 2013 10:50:04 +0200 |
Felix Wolfsteller |
BedHeightSoundingProcessor: refactored to avoid drifting behavior when using
|
| Thu, 17 Oct 2013 09:40:12 +0200 |
Felix Wolfsteller |
meta-data.xml: cleanup longitudinal-section-user-prototype, removing dupes.
|
| Mon, 21 Oct 2013 10:49:39 +0200 |
Sascha L. Teichmann |
Removed same package import.
|
| Mon, 21 Oct 2013 10:48:51 +0200 |
Sascha L. Teichmann |
Removed obsolete import.
|
| Fri, 18 Oct 2013 18:40:50 +0200 |
Sascha L. Teichmann |
Datacage: Add function dc:to-date(number) which converts a epoch base number to a date object.
|
| Fri, 18 Oct 2013 18:36:18 +0200 |
Sascha L. Teichmann |
Datacage: Added dc:min-number(list) and dc:max-number(list) to extract the numerical
|
| Fri, 18 Oct 2013 18:15:33 +0200 |
Sascha L. Teichmann |
Datacage: Add function dc:find-all(needle, haystack).
|
| Fri, 18 Oct 2013 15:44:01 +0200 |
Andre Heinecke |
(issue1474) Fix deepCopy signatures and actually copy the facet index now
|
| Fri, 18 Oct 2013 15:30:44 +0200 |
Andre Heinecke |
(issue1071) Handle the case where no MeasurementStation exists
|
| Thu, 17 Oct 2013 18:56:44 +0200 |
Sascha L. Teichmann |
More datacage ref doc.
|
| Thu, 17 Oct 2013 18:37:56 +0200 |
Andre Heinecke |
(issue1474) Fix copying of SQ* Facets
|
| Thu, 17 Oct 2013 17:47:58 +0200 |
Tom Gottfried |
Importer: Avoid 0-lenght Q-ranges in WST-CSV-parsers.
|
| Thu, 17 Oct 2013 15:26:12 +0200 |
Sascha L. Teichmann |
Replaced more tabs with spaces + minor cosmetics (removed out commented code from double precision branch).
|
| Thu, 17 Oct 2013 15:13:32 +0200 |
Sascha L. Teichmann |
Replaced tabs with 4 spaces.
|
| Thu, 17 Oct 2013 15:05:08 +0200 |
Tom Gottfried |
WstParser: Do not add Q-range for trailing Q-line.
|
| Thu, 17 Oct 2013 12:14:10 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
| Thu, 17 Oct 2013 12:11:09 +0200 |
Sascha L. Teichmann |
Removed obsolete import + whitespace cleanup.
|
| Thu, 17 Oct 2013 08:29:46 +0200 |
Felix Wolfsteller |
Add getModelDescription to FlowVelocityModel.
|
| Thu, 17 Oct 2013 07:48:51 +0200 |
Felix Wolfsteller |
White space cosmetics, added debug output.
|
| Thu, 17 Oct 2013 07:46:36 +0200 |
Felix Wolfsteller |
SedimentYieldArtifact: Accept 'total' load, genreate facet for it.
|
| Thu, 17 Oct 2013 07:45:41 +0200 |
Felix Wolfsteller |
FlowVelocityModelArtifact: Slightly improve facet names.
|
| Thu, 17 Oct 2013 07:45:13 +0200 |
Felix Wolfsteller |
Cosmetics.
|
| Thu, 17 Oct 2013 07:44:34 +0200 |
Felix Wolfsteller |
Cosmetics.
|
| Thu, 17 Oct 2013 07:42:31 +0200 |
Felix Wolfsteller |
issue1473: Let vollmer curves appear under 'former calc/waterlevels from fix.'.
|
| Thu, 17 Oct 2013 07:39:42 +0200 |
Felix Wolfsteller |
cosmetics.
|
| Wed, 16 Oct 2013 15:25:56 +0200 |
Felix Wolfsteller |
Adjusted i18n to match the one in client.
|
| Wed, 16 Oct 2013 18:48:02 +0200 |
Andre Heinecke |
Use more failsave pattern for SQ-facets.
|
| Wed, 16 Oct 2013 18:46:43 +0200 |
Andre Heinecke |
Configure correct name for SQ-relation C-chart.
|
| Wed, 16 Oct 2013 15:23:04 +0200 |
Felix Wolfsteller |
i18n for total load dc.
|
| Wed, 16 Oct 2013 15:22:18 +0200 |
Felix Wolfsteller |
Offer total loads in dc.
|
| Wed, 16 Oct 2013 15:21:14 +0200 |
Felix Wolfsteller |
Added i18n for upcoming total load via dc.
|
| Wed, 16 Oct 2013 10:42:45 +0200 |
Felix Wolfsteller |
Refactoring: Move functionality of BedHeightAccess into BedHeightFacet for now.
|
| Wed, 16 Oct 2013 10:33:09 +0200 |
Felix Wolfsteller |
Minor BedHeightAccess refactoring.
|
| Wed, 16 Oct 2013 14:43:27 +0200 |
Tom Gottfried |
Remove code that was previously commented out.
|
| Wed, 16 Oct 2013 14:40:19 +0200 |
Tom Gottfried |
BedHeightSingleParser: do not omit lines if last column is empty.
|
| Wed, 16 Oct 2013 13:06:30 +0200 |
Sascha L. Teichmann |
Jim, he's dead.
double-precision
|
| Wed, 16 Oct 2013 13:03:13 +0200 |
Sascha L. Teichmann |
Merged double-precision branch.
|
| Wed, 16 Oct 2013 12:57:40 +0200 |
Sascha L. Teichmann |
Merge branch default
double-precision
|
| Wed, 16 Oct 2013 12:39:33 +0200 |
Sascha L. Teichmann |
Reorder generation of static part of describe document for fast XML DOM handling.
|
| Wed, 16 Oct 2013 12:00:29 +0200 |
Andre Heinecke |
(issue1353) Document that there are more things to syncing then just the Number
|
| Wed, 16 Oct 2013 11:45:23 +0200 |
Andre Heinecke |
(issue1474) Add sqrelation user data and disable filtering for it
|
| Wed, 16 Oct 2013 11:42:53 +0200 |
Andre Heinecke |
Add debug output for variables in user context
|
| Tue, 15 Oct 2013 17:01:20 +0200 |
Andre Heinecke |
Break sometimes when dumping variables. Still ugly but a bit nicer.
|
| Wed, 16 Oct 2013 10:18:19 +0200 |
Tom Gottfried |
Importer doc: fix syntax error.
double-precision
|
| Wed, 16 Oct 2013 09:56:15 +0200 |
Tom Gottfried |
BedHeightSingleParser: do not log every data line in file.
double-precision
|
| Tue, 15 Oct 2013 19:49:25 +0200 |
Tom Gottfried |
Do not log trace of WST-Parser parse exception and document it.
double-precision
|
| Tue, 15 Oct 2013 19:19:45 +0200 |
Tom Gottfried |
WST-Parser: check consistence of station ordering in file.
double-precision
|
| Tue, 15 Oct 2013 19:18:44 +0200 |
Tom Gottfried |
Comments.
double-precision
|
| Tue, 15 Oct 2013 18:41:55 +0200 |
Tom Gottfried |
Merged changes from default into double precision branch.
double-precision
|
| Tue, 15 Oct 2013 18:31:59 +0200 |
Sascha L. Teichmann |
WST Import: Added parse error exception to WST parser.
|
| Tue, 15 Oct 2013 17:39:04 +0200 |
Felix Wolfsteller |
typo fix in doc.
|
| Tue, 15 Oct 2013 17:38:50 +0200 |
Felix Wolfsteller |
BedHeightsArtifact: Use FacetTypes, eliminate local facet type definition.
|
| Tue, 15 Oct 2013 17:31:44 +0200 |
Felix Wolfsteller |
Prepare new facet types for bedheights.
|
| Tue, 15 Oct 2013 16:41:18 +0200 |
Felix Wolfsteller |
i18n for old calculations dc.
|
| Tue, 15 Oct 2013 15:32:36 +0200 |
Tom Gottfried |
Importer manual: use unique revision identifier.
double-precision
|
| Tue, 15 Oct 2013 15:37:54 +0200 |
Felix Wolfsteller |
Add aforementioned user-prototype.
|
| Tue, 15 Oct 2013 15:37:24 +0200 |
Felix Wolfsteller |
Prototypically add longitudinal-section-user-prototype, with issues.
|
| Tue, 15 Oct 2013 15:25:09 +0200 |
Tom Gottfried |
Importer packaging: run pdflatex three times to get references and page numbering right.
double-precision
|
| Tue, 15 Oct 2013 15:06:29 +0200 |
Felix Wolfsteller |
issue1345: Show bedheight_type in tooltip.
|
| Tue, 15 Oct 2013 15:03:51 +0200 |
Felix Wolfsteller |
issue1345: Bring back waterlevel/diffs from fixation into minfo dc element.
|
| Tue, 15 Oct 2013 14:41:39 +0200 |
Felix Wolfsteller |
Fix DC group-by statement, there is no 'oid' variable around.
|
| Tue, 15 Oct 2013 07:06:19 +0200 |
Felix Wolfsteller |
issue1345: DC: group bed heights of single years by year.
|
| Tue, 15 Oct 2013 14:45:46 +0200 |
Tom Gottfried |
Importer: skip historical discharge tables per default as they come via ETL.
double-precision
|
| Tue, 15 Oct 2013 10:11:38 +0200 |
Tom Gottfried |
Add warning on errors when importing duplicates.
double-precision
|
| Mon, 14 Oct 2013 17:41:19 +0200 |
Felix Wolfsteller |
issue1345: Fix sediment load facet type, adjust theme name.
|
| Mon, 14 Oct 2013 17:40:31 +0200 |
Felix Wolfsteller |
have same translations for sediment loads fractions.
|
| Mon, 14 Oct 2013 16:38:16 +0200 |
Sascha L. Teichmann |
Datacage doc ref: Explain dc:group
|
| Mon, 14 Oct 2013 16:06:36 +0200 |
Sascha L. Teichmann |
Datacage ref doc: Explain dc:filter.
|
| Mon, 14 Oct 2013 15:55:36 +0200 |
Sascha L. Teichmann |
Datacage ref doc: Move dc:if & dc:choose up because they are more important than other elements.
|
| Mon, 14 Oct 2013 15:53:06 +0200 |
Sascha L. Teichmann |
Datacage ref doc: Explain dc:for-each
|
| Mon, 14 Oct 2013 15:43:34 +0200 |
Sascha L. Teichmann |
Datacage ref doc: Explain dc:virtual-column.
|
| Mon, 14 Oct 2013 15:27:49 +0200 |
Sascha L. Teichmann |
Datacage ref doc: Explain dc:macro & Co.
|
| Mon, 14 Oct 2013 14:40:51 +0200 |
Sascha L. Teichmann |
Datacage ref doc: Explain dc:variable and dc:convert.
|
| Mon, 14 Oct 2013 13:44:54 +0200 |
Sascha L. Teichmann |
Dataage ref doc: Explain dc:context, dc:comment
|
| Mon, 14 Oct 2013 13:08:33 +0200 |
Sascha L. Teichmann |
Datacage ref doc: More structure. Explain text interpolation.
|
| Mon, 14 Oct 2013 12:16:33 +0200 |
Felix Wolfsteller |
Added sedimentdensity i18n.
|
| Mon, 14 Oct 2013 12:15:34 +0200 |
Felix Wolfsteller |
issue1345: Added getDepth() to SedimentDensityFactory.
|
| Mon, 14 Oct 2013 12:14:20 +0200 |
Felix Wolfsteller |
issue1345: Change Sediment Density Facet label.
|
| Mon, 14 Oct 2013 11:49:15 +0200 |
Felix Wolfsteller |
SedimentDensityProcessor: Fix, use getAllDensities instead of only dens. in year 2006.
|
| Mon, 14 Oct 2013 11:48:38 +0200 |
Felix Wolfsteller |
SedimentDensity: Fix getAllDensities and made it public.
|
| Mon, 14 Oct 2013 10:01:33 +0200 |
Felix Wolfsteller |
i18n for dc and facet name generation.
|
| Mon, 14 Oct 2013 09:55:41 +0200 |
Felix Wolfsteller |
cosmetics.
|
| Mon, 14 Oct 2013 09:53:54 +0200 |
Felix Wolfsteller |
issue1345: Adjust name of sediment yield/load facets to include fraction name and times.
|
| Mon, 14 Oct 2013 09:52:17 +0200 |
Felix Wolfsteller |
issue1345: Prepare SedimentLoadFactory to deliver fraction name and time ranges.
|
| Mon, 14 Oct 2013 09:51:27 +0200 |
Felix Wolfsteller |
cosmetics.
|
| Mon, 14 Oct 2013 07:33:32 +0200 |
Felix Wolfsteller |
Comment in meta-data.xml.
|
| Mon, 14 Oct 2013 07:31:32 +0200 |
Felix Wolfsteller |
cosmetical description fix.
|
| Sat, 12 Oct 2013 10:26:45 +0200 |
Sascha L. Teichmann |
Removed obsolete imports.
|
| Fri, 11 Oct 2013 18:40:33 +0200 |
Andre Heinecke |
(issue1529) Be more tolerant in the fitting.
|
| Fri, 11 Oct 2013 17:11:15 +0200 |
Andre Heinecke |
(issue1529) Only interpolate within a step limit in WQ diagram
|
| Fri, 11 Oct 2013 15:35:25 +0200 |
Andre Heinecke |
Polish SQ Datacage and Facets
|
| Fri, 11 Oct 2013 12:44:25 +0200 |
Felix Wolfsteller |
doc fix <3 .
|
| Fri, 11 Oct 2013 12:40:52 +0200 |
Felix Wolfsteller |
doc fix.
|
| Fri, 11 Oct 2013 12:38:57 +0200 |
Felix Wolfsteller |
Doc typo fix.
|
| Fri, 11 Oct 2013 12:26:00 +0200 |
Felix Wolfsteller |
issue1345: include fix for display of epochs stoptime.
|
| Fri, 11 Oct 2013 12:23:27 +0200 |
Felix Wolfsteller |
issue1512: conf.xml: configure flowvelocitymodel artifact-factory.
|
| Fri, 11 Oct 2013 12:22:40 +0200 |
Felix Wolfsteller |
issue1512: Adde flow-velocity-models dc conf.
|
| Fri, 11 Oct 2013 12:18:38 +0200 |
Felix Wolfsteller |
issue1345: Added accidentally ommitted i18n for sedimentload dc.
|
| Fri, 11 Oct 2013 12:15:01 +0200 |
Felix Wolfsteller |
issue1512: spawn more facets for FlowVelocityMeasurementArtifact .
|
| Fri, 11 Oct 2013 12:12:52 +0200 |
Felix Wolfsteller |
issue1512: Adjusted Q and WOutProcessors to handle data
|
| Fri, 11 Oct 2013 11:44:21 +0200 |
Felix Wolfsteller |
More doc fixes.
|
| Fri, 11 Oct 2013 11:42:56 +0200 |
Felix Wolfsteller |
Processor: Doc.
|
| Fri, 11 Oct 2013 10:30:26 +0200 |
Felix Wolfsteller |
issue1512: Added method to get FlowVelocityModel by id.
|
| Fri, 11 Oct 2013 10:29:37 +0200 |
Felix Wolfsteller |
issue1512: Initial commit of FlowVelocityModelArtifact.
|
| Fri, 11 Oct 2013 10:28:07 +0200 |
Felix Wolfsteller |
issue1512: FlowVelocityCalculation: Opened prepareData(), added doc.
|
| Fri, 11 Oct 2013 10:26:18 +0200 |
Felix Wolfsteller |
issue1512: Added comment, opened constructor as we will reuse this class.
|
| Fri, 11 Oct 2013 10:25:34 +0200 |
Felix Wolfsteller |
issue1512: Prepare new facet types for flow velocity model facet, add comment.
|
| Thu, 10 Oct 2013 18:34:04 +0200 |
Sascha L. Teichmann |
Fixings overview panel: Send valid encoded JSON filters to server part of the client.
|
| Thu, 10 Oct 2013 11:27:56 +0200 |
Felix Wolfsteller |
issue1345: Factored out description creation for loads. Make epochs show end time.
|
