comparison doc/Doxyfile.in @ 66:098a10fc2e83 0.9.2

Add doxygen files and improve doxygen comments
author Andre Heinecke <andre.heinecke@intevation.de>
date Thu, 21 May 2015 15:21:47 +0200
parents
children
comparison
equal deleted inserted replaced
65:508a71328d1f 66:098a10fc2e83
1 # Doxyfile 1.8.1.2
2
3 # This file describes the settings to be used by the documentation system
4 # doxygen (www.doxygen.org) for a project.
5 #
6 # All text after a hash (#) is considered a comment and will be ignored.
7 # The format is:
8 # TAG = value [value, ...]
9 # For lists items can also be appended using:
10 # TAG += value [value, ...]
11 # Values that contain spaces should be placed between quotes (" ").
12
13 #---------------------------------------------------------------------------
14 # Project related configuration options
15 #---------------------------------------------------------------------------
16
17 # This tag specifies the encoding used for all characters in the config file
18 # that follow. The default is UTF-8 which is also the encoding used for all
19 # text before the first occurrence of this tag. Doxygen uses libiconv (or the
20 # iconv built into libc) for the transcoding. See
21 # http://www.gnu.org/software/libiconv for the list of possible encodings.
22
23 DOXYFILE_ENCODING = UTF-8
24
25 # The PROJECT_NAME tag is a single word (or sequence of words) that should
26 # identify the project. Note that if you do not use Doxywizard you need
27 # to put quotes around the project name if it contains spaces.
28
29 PROJECT_NAME = "RetraceIT"
30
31 # The PROJECT_NUMBER tag can be used to enter a project or revision number.
32 # This could be handy for archiving the generated documentation or
33 # if some version control system is used.
34
35 PROJECT_NUMBER = @PROJECT_VERSION@
36
37 # Using the PROJECT_BRIEF tag one can provide an optional one line description
38 # for a project that appears at the top of each page and should give viewer
39 # a quick idea about the purpose of the project. Keep the description short.
40
41 PROJECT_BRIEF = "RetraceIT is a tool to view recorded login sessions."
42
43 # With the PROJECT_LOGO tag one can specify an logo or icon that is
44 # included in the documentation. The maximum height of the logo should not
45 # exceed 55 pixels and the maximum width should not exceed 200 pixels.
46 # Doxygen will copy the logo to the output directory.
47
48 PROJECT_LOGO = @CMAKE_SOURCE_DIR@/src/icons/48_icon.png
49
50 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
51 # base path where the generated documentation will be put.
52 # If a relative path is entered, it will be relative to the location
53 # where doxygen was started. If left blank the current directory will be used.
54
55 OUTPUT_DIRECTORY = @CMAKE_BINARY_DIR@/doc/generated
56
57 # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
58 # 4096 sub-directories (in 2 levels) under the output directory of each output
59 # format and will distribute the generated files over these directories.
60 # Enabling this option can be useful when feeding doxygen a huge amount of
61 # source files, where putting all generated files in the same directory would
62 # otherwise cause performance problems for the file system.
63
64 CREATE_SUBDIRS = NO
65
66 # The OUTPUT_LANGUAGE tag is used to specify the language in which all
67 # documentation generated by doxygen is written. Doxygen will use this
68 # information to generate all constant output in the proper language.
69 # The default language is English, other supported languages are:
70 # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
71 # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
72 # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
73 # messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
74 # Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak,
75 # Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
76
77 OUTPUT_LANGUAGE = English
78
79 # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
80 # include brief member descriptions after the members that are listed in
81 # the file and class documentation (similar to JavaDoc).
82 # Set to NO to disable this.
83
84 BRIEF_MEMBER_DESC = YES
85
86 # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
87 # the brief description of a member or function before the detailed description.
88 # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
89 # brief descriptions will be completely suppressed.
90
91 REPEAT_BRIEF = YES
92
93 # This tag implements a quasi-intelligent brief description abbreviator
94 # that is used to form the text in various listings. Each string
95 # in this list, if found as the leading text of the brief description, will be
96 # stripped from the text and the result after processing the whole list, is
97 # used as the annotated text. Otherwise, the brief description is used as-is.
98 # If left blank, the following values are used ("$name" is automatically
99 # replaced with the name of the entity): "The $name class" "The $name widget"
100 # "The $name file" "is" "provides" "specifies" "contains"
101 # "represents" "a" "an" "the"
102
103 ABBREVIATE_BRIEF =
104
105 # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
106 # Doxygen will generate a detailed section even if there is only a brief
107 # description.
108
109 ALWAYS_DETAILED_SEC = NO
110
111 # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
112 # inherited members of a class in the documentation of that class as if those
113 # members were ordinary class members. Constructors, destructors and assignment
114 # operators of the base classes will not be shown.
115
116 INLINE_INHERITED_MEMB = NO
117
118 # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
119 # path before files name in the file list and in the header files. If set
120 # to NO the shortest path that makes the file name unique will be used.
121
122 FULL_PATH_NAMES = YES
123
124 # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
125 # can be used to strip a user-defined part of the path. Stripping is
126 # only done if one of the specified strings matches the left-hand part of
127 # the path. The tag can be used to show relative paths in the file list.
128 # If left blank the directory from which doxygen is run is used as the
129 # path to strip.
130
131 STRIP_FROM_PATH = @CMAKE_SOURCE_DIR@
132
133 # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
134 # the path mentioned in the documentation of a class, which tells
135 # the reader which header file to include in order to use a class.
136 # If left blank only the name of the header file containing the class
137 # definition is used. Otherwise one should specify the include paths that
138 # are normally passed to the compiler using the -I flag.
139
140 STRIP_FROM_INC_PATH =
141
142 # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
143 # (but less readable) file names. This can be useful if your file system
144 # doesn't support long names like on DOS, Mac, or CD-ROM.
145
146 SHORT_NAMES = NO
147
148 # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
149 # will interpret the first line (until the first dot) of a JavaDoc-style
150 # comment as the brief description. If set to NO, the JavaDoc
151 # comments will behave just like regular Qt-style comments
152 # (thus requiring an explicit @brief command for a brief description.)
153
154 JAVADOC_AUTOBRIEF = NO
155
156 # If the QT_AUTOBRIEF tag is set to YES then Doxygen will
157 # interpret the first line (until the first dot) of a Qt-style
158 # comment as the brief description. If set to NO, the comments
159 # will behave just like regular Qt-style comments (thus requiring
160 # an explicit \brief command for a brief description.)
161
162 QT_AUTOBRIEF = NO
163
164 # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
165 # treat a multi-line C++ special comment block (i.e. a block of //! or ///
166 # comments) as a brief description. This used to be the default behaviour.
167 # The new default is to treat a multi-line C++ comment block as a detailed
168 # description. Set this tag to YES if you prefer the old behaviour instead.
169
170 MULTILINE_CPP_IS_BRIEF = NO
171
172 # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
173 # member inherits the documentation from any documented member that it
174 # re-implements.
175
176 INHERIT_DOCS = YES
177
178 # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
179 # a new page for each member. If set to NO, the documentation of a member will
180 # be part of the file/class/namespace that contains it.
181
182 SEPARATE_MEMBER_PAGES = NO
183
184 # The TAB_SIZE tag can be used to set the number of spaces in a tab.
185 # Doxygen uses this value to replace tabs by spaces in code fragments.
186
187 TAB_SIZE = 4
188
189 # This tag can be used to specify a number of aliases that acts
190 # as commands in the documentation. An alias has the form "name=value".
191 # For example adding "sideeffect=\par Side Effects:\n" will allow you to
192 # put the command \sideeffect (or @sideeffect) in the documentation, which
193 # will result in a user-defined paragraph with heading "Side Effects:".
194 # You can put \n's in the value part of an alias to insert newlines.
195
196 ALIASES = "TODO=\todo"
197
198 # This tag can be used to specify a number of word-keyword mappings (TCL only).
199 # A mapping has the form "name=value". For example adding
200 # "class=itcl::class" will allow you to use the command class in the
201 # itcl::class meaning.
202
203 TCL_SUBST =
204
205 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
206 # sources only. Doxygen will then generate output that is more tailored for C.
207 # For instance, some of the names that are used will be different. The list
208 # of all members will be omitted, etc.
209
210 OPTIMIZE_OUTPUT_FOR_C = NO
211
212 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
213 # sources only. Doxygen will then generate output that is more tailored for
214 # Java. For instance, namespaces will be presented as packages, qualified
215 # scopes will look different, etc.
216
217 OPTIMIZE_OUTPUT_JAVA = NO
218
219 # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
220 # sources only. Doxygen will then generate output that is more tailored for
221 # Fortran.
222
223 OPTIMIZE_FOR_FORTRAN = NO
224
225 # Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
226 # sources. Doxygen will then generate output that is tailored for
227 # VHDL.
228
229 OPTIMIZE_OUTPUT_VHDL = NO
230
231 # Doxygen selects the parser to use depending on the extension of the files it
232 # parses. With this tag you can assign which parser to use for a given extension.
233 # Doxygen has a built-in mapping, but you can override or extend it using this
234 # tag. The format is ext=language, where ext is a file extension, and language
235 # is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
236 # C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
237 # doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
238 # (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
239 # you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
240
241 EXTENSION_MAPPING =
242
243 # If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all
244 # comments according to the Markdown format, which allows for more readable
245 # documentation. See http://daringfireball.net/projects/markdown/ for details.
246 # The output of markdown processing is further processed by doxygen, so you
247 # can mix doxygen, HTML, and XML commands with Markdown formatting.
248 # Disable only in case of backward compatibilities issues.
249
250 MARKDOWN_SUPPORT = YES
251
252 # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
253 # to include (a tag file for) the STL sources as input, then you should
254 # set this tag to YES in order to let doxygen match functions declarations and
255 # definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
256 # func(std::string) {}). This also makes the inheritance and collaboration
257 # diagrams that involve STL classes more complete and accurate.
258
259 BUILTIN_STL_SUPPORT = NO
260
261 # If you use Microsoft's C++/CLI language, you should set this option to YES to
262 # enable parsing support.
263
264 CPP_CLI_SUPPORT = NO
265
266 # Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
267 # Doxygen will parse them like normal C++ but will assume all classes use public
268 # instead of private inheritance when no explicit protection keyword is present.
269
270 SIP_SUPPORT = NO
271
272 # For Microsoft's IDL there are propget and propput attributes to indicate getter
273 # and setter methods for a property. Setting this option to YES (the default)
274 # will make doxygen replace the get and set methods by a property in the
275 # documentation. This will only work if the methods are indeed getting or
276 # setting a simple type. If this is not the case, or you want to show the
277 # methods anyway, you should set this option to NO.
278
279 IDL_PROPERTY_SUPPORT = YES
280
281 # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
282 # tag is set to YES, then doxygen will reuse the documentation of the first
283 # member in the group (if any) for the other members of the group. By default
284 # all members of a group must be documented explicitly.
285
286 DISTRIBUTE_GROUP_DOC = NO
287
288 # Set the SUBGROUPING tag to YES (the default) to allow class member groups of
289 # the same type (for instance a group of public functions) to be put as a
290 # subgroup of that type (e.g. under the Public Functions section). Set it to
291 # NO to prevent subgrouping. Alternatively, this can be done per class using
292 # the \nosubgrouping command.
293
294 SUBGROUPING = YES
295
296 # When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and
297 # unions are shown inside the group in which they are included (e.g. using
298 # @ingroup) instead of on a separate page (for HTML and Man pages) or
299 # section (for LaTeX and RTF).
300
301 INLINE_GROUPED_CLASSES = NO
302
303 # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and
304 # unions with only public data fields will be shown inline in the documentation
305 # of the scope in which they are defined (i.e. file, namespace, or group
306 # documentation), provided this scope is documented. If set to NO (the default),
307 # structs, classes, and unions are shown on a separate page (for HTML and Man
308 # pages) or section (for LaTeX and RTF).
309
310 INLINE_SIMPLE_STRUCTS = NO
311
312 # When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
313 # is documented as struct, union, or enum with the name of the typedef. So
314 # typedef struct TypeS {} TypeT, will appear in the documentation as a struct
315 # with name TypeT. When disabled the typedef will appear as a member of a file,
316 # namespace, or class. And the struct will be named TypeS. This can typically
317 # be useful for C code in case the coding convention dictates that all compound
318 # types are typedef'ed and only the typedef is referenced, never the tag name.
319
320 TYPEDEF_HIDES_STRUCT = NO
321
322
323 # Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be
324 # set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given
325 # their name and scope. Since this can be an expensive process and often the
326 # same symbol appear multiple times in the code, doxygen keeps a cache of
327 # pre-resolved symbols. If the cache is too small doxygen will become slower.
328 # If the cache is too large, memory is wasted. The cache size is given by this
329 # formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0,
330 # corresponding to a cache size of 2^16 = 65536 symbols.
331
332 LOOKUP_CACHE_SIZE = 0
333
334 #---------------------------------------------------------------------------
335 # Build related configuration options
336 #---------------------------------------------------------------------------
337
338 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
339 # documentation are documented, even if no documentation was available.
340 # Private class members and static file members will be hidden unless
341 # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
342
343 EXTRACT_ALL = YES
344
345 # If the EXTRACT_PRIVATE tag is set to YES all private members of a class
346 # will be included in the documentation.
347
348 EXTRACT_PRIVATE = YES
349
350 # If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation.
351
352 EXTRACT_PACKAGE = NO
353
354 # If the EXTRACT_STATIC tag is set to YES all static members of a file
355 # will be included in the documentation.
356
357 EXTRACT_STATIC = YES
358
359 # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
360 # defined locally in source files will be included in the documentation.
361 # If set to NO only classes defined in header files are included.
362
363 EXTRACT_LOCAL_CLASSES = YES
364
365 # This flag is only useful for Objective-C code. When set to YES local
366 # methods, which are defined in the implementation section but not in
367 # the interface are included in the documentation.
368 # If set to NO (the default) only methods in the interface are included.
369
370 EXTRACT_LOCAL_METHODS = NO
371
372 # If this flag is set to YES, the members of anonymous namespaces will be
373 # extracted and appear in the documentation as a namespace called
374 # 'anonymous_namespace{file}', where file will be replaced with the base
375 # name of the file that contains the anonymous namespace. By default
376 # anonymous namespaces are hidden.
377
378 EXTRACT_ANON_NSPACES = NO
379
380 # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
381 # undocumented members of documented classes, files or namespaces.
382 # If set to NO (the default) these members will be included in the
383 # various overviews, but no documentation section is generated.
384 # This option has no effect if EXTRACT_ALL is enabled.
385
386 HIDE_UNDOC_MEMBERS = NO
387
388 # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
389 # undocumented classes that are normally visible in the class hierarchy.
390 # If set to NO (the default) these classes will be included in the various
391 # overviews. This option has no effect if EXTRACT_ALL is enabled.
392
393 HIDE_UNDOC_CLASSES = NO
394
395 # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
396 # friend (class|struct|union) declarations.
397 # If set to NO (the default) these declarations will be included in the
398 # documentation.
399
400 HIDE_FRIEND_COMPOUNDS = NO
401
402 # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
403 # documentation blocks found inside the body of a function.
404 # If set to NO (the default) these blocks will be appended to the
405 # function's detailed documentation block.
406
407 HIDE_IN_BODY_DOCS = NO
408
409 # The INTERNAL_DOCS tag determines if documentation
410 # that is typed after a \internal command is included. If the tag is set
411 # to NO (the default) then the documentation will be excluded.
412 # Set it to YES to include the internal documentation.
413
414 INTERNAL_DOCS = NO
415
416 # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
417 # file names in lower-case letters. If set to YES upper-case letters are also
418 # allowed. This is useful if you have classes or files whose names only differ
419 # in case and if your file system supports case sensitive file names. Windows
420 # and Mac users are advised to set this option to NO.
421
422 CASE_SENSE_NAMES = YES
423
424 # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
425 # will show members with their full class and namespace scopes in the
426 # documentation. If set to YES the scope will be hidden.
427
428 HIDE_SCOPE_NAMES = NO
429
430 # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
431 # will put a list of the files that are included by a file in the documentation
432 # of that file.
433
434 SHOW_INCLUDE_FILES = YES
435
436 # If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
437 # will list include files with double quotes in the documentation
438 # rather than with sharp brackets.
439
440 FORCE_LOCAL_INCLUDES = NO
441
442 # If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
443 # is inserted in the documentation for inline members.
444
445 INLINE_INFO = YES
446
447 # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
448 # will sort the (detailed) documentation of file and class members
449 # alphabetically by member name. If set to NO the members will appear in
450 # declaration order.
451
452 SORT_MEMBER_DOCS = YES
453
454 # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
455 # brief documentation of file, namespace and class members alphabetically
456 # by member name. If set to NO (the default) the members will appear in
457 # declaration order.
458
459 SORT_BRIEF_DOCS = NO
460
461 # If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
462 # will sort the (brief and detailed) documentation of class members so that
463 # constructors and destructors are listed first. If set to NO (the default)
464 # the constructors will appear in the respective orders defined by
465 # SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
466 # This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
467 # and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
468
469 SORT_MEMBERS_CTORS_1ST = NO
470
471 # If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
472 # hierarchy of group names into alphabetical order. If set to NO (the default)
473 # the group names will appear in their defined order.
474
475 SORT_GROUP_NAMES = NO
476
477 # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
478 # sorted by fully-qualified names, including namespaces. If set to
479 # NO (the default), the class list will be sorted only by class name,
480 # not including the namespace part.
481 # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
482 # Note: This option applies only to the class list, not to the
483 # alphabetical list.
484
485 SORT_BY_SCOPE_NAME = NO
486
487 # If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to
488 # do proper type resolution of all parameters of a function it will reject a
489 # match between the prototype and the implementation of a member function even
490 # if there is only one candidate or it is obvious which candidate to choose
491 # by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen
492 # will still accept a match between prototype and implementation in such cases.
493
494 STRICT_PROTO_MATCHING = NO
495
496 # The GENERATE_TODOLIST tag can be used to enable (YES) or
497 # disable (NO) the todo list. This list is created by putting \todo
498 # commands in the documentation.
499
500 GENERATE_TODOLIST = YES
501
502 # The GENERATE_TESTLIST tag can be used to enable (YES) or
503 # disable (NO) the test list. This list is created by putting \test
504 # commands in the documentation.
505
506 GENERATE_TESTLIST = YES
507
508 # The GENERATE_BUGLIST tag can be used to enable (YES) or
509 # disable (NO) the bug list. This list is created by putting \bug
510 # commands in the documentation.
511
512 GENERATE_BUGLIST = YES
513
514 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
515 # disable (NO) the deprecated list. This list is created by putting
516 # \deprecated commands in the documentation.
517
518 GENERATE_DEPRECATEDLIST= YES
519
520 # The ENABLED_SECTIONS tag can be used to enable conditional
521 # documentation sections, marked by \if sectionname ... \endif.
522
523 ENABLED_SECTIONS =
524
525 # The MAX_INITIALIZER_LINES tag determines the maximum number of lines
526 # the initial value of a variable or macro consists of for it to appear in
527 # the documentation. If the initializer consists of more lines than specified
528 # here it will be hidden. Use a value of 0 to hide initializers completely.
529 # The appearance of the initializer of individual variables and macros in the
530 # documentation can be controlled using \showinitializer or \hideinitializer
531 # command in the documentation regardless of this setting.
532
533 MAX_INITIALIZER_LINES = 30
534
535 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated
536 # at the bottom of the documentation of classes and structs. If set to YES the
537 # list will mention the files that were used to generate the documentation.
538
539 SHOW_USED_FILES = YES
540
541 # Set the SHOW_FILES tag to NO to disable the generation of the Files page.
542 # This will remove the Files entry from the Quick Index and from the
543 # Folder Tree View (if specified). The default is YES.
544
545 SHOW_FILES = YES
546
547 # Set the SHOW_NAMESPACES tag to NO to disable the generation of the
548 # Namespaces page.
549 # This will remove the Namespaces entry from the Quick Index
550 # and from the Folder Tree View (if specified). The default is YES.
551
552 SHOW_NAMESPACES = YES
553
554 # The FILE_VERSION_FILTER tag can be used to specify a program or script that
555 # doxygen should invoke to get the current version for each file (typically from
556 # the version control system). Doxygen will invoke the program by executing (via
557 # popen()) the command <command> <input-file>, where <command> is the value of
558 # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
559 # provided by doxygen. Whatever the program writes to standard output
560 # is used as the file version. See the manual for examples.
561
562 FILE_VERSION_FILTER =
563
564 # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
565 # by doxygen. The layout file controls the global structure of the generated
566 # output files in an output format independent way. To create the layout file
567 # that represents doxygen's defaults, run doxygen with the -l option.
568 # You can optionally specify a file name after the option, if omitted
569 # DoxygenLayout.xml will be used as the name of the layout file.
570
571 LAYOUT_FILE =
572
573 # The CITE_BIB_FILES tag can be used to specify one or more bib files
574 # containing the references data. This must be a list of .bib files. The
575 # .bib extension is automatically appended if omitted. Using this command
576 # requires the bibtex tool to be installed. See also
577 # http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style
578 # of the bibliography can be controlled using LATEX_BIB_STYLE. To use this
579 # feature you need bibtex and perl available in the search path.
580
581 CITE_BIB_FILES =
582
583 #---------------------------------------------------------------------------
584 # configuration options related to warning and progress messages
585 #---------------------------------------------------------------------------
586
587 # The QUIET tag can be used to turn on/off the messages that are generated
588 # by doxygen. Possible values are YES and NO. If left blank NO is used.
589
590 QUIET = NO
591
592 # The WARNINGS tag can be used to turn on/off the warning messages that are
593 # generated by doxygen. Possible values are YES and NO. If left blank
594 # NO is used.
595
596 WARNINGS = YES
597
598 # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
599 # for undocumented members. If EXTRACT_ALL is set to YES then this flag will
600 # automatically be disabled.
601
602 WARN_IF_UNDOCUMENTED = YES
603
604 # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
605 # potential errors in the documentation, such as not documenting some
606 # parameters in a documented function, or documenting parameters that
607 # don't exist or using markup commands wrongly.
608
609 WARN_IF_DOC_ERROR = YES
610
611 # The WARN_NO_PARAMDOC option can be enabled to get warnings for
612 # functions that are documented, but have no documentation for their parameters
613 # or return value. If set to NO (the default) doxygen will only warn about
614 # wrong or incomplete parameter documentation, but not about the absence of
615 # documentation.
616
617 WARN_NO_PARAMDOC = YES
618
619 # The WARN_FORMAT tag determines the format of the warning messages that
620 # doxygen can produce. The string should contain the $file, $line, and $text
621 # tags, which will be replaced by the file and line number from which the
622 # warning originated and the warning text. Optionally the format may contain
623 # $version, which will be replaced by the version of the file (if it could
624 # be obtained via FILE_VERSION_FILTER)
625
626 WARN_FORMAT = "$file:$line: $text"
627
628 # The WARN_LOGFILE tag can be used to specify a file to which warning
629 # and error messages should be written. If left blank the output is written
630 # to stderr.
631
632 WARN_LOGFILE =
633
634 #---------------------------------------------------------------------------
635 # configuration options related to the input files
636 #---------------------------------------------------------------------------
637
638 # The INPUT tag can be used to specify the files and/or directories that contain
639 # documented source files. You may enter file names like "myfile.cpp" or
640 # directories like "/usr/src/myproject". Separate the files or directories
641 # with spaces.
642
643 INPUT = @CMAKE_SOURCE_DIR@/src @CMAKE_SOURCE_DIR@/doc/mainpage.dox @CMAKE_SOURCE_DIR@/INSTALL
644
645 # This tag can be used to specify the character encoding of the source files
646 # that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
647 # also the default input encoding. Doxygen uses libiconv (or the iconv built
648 # into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
649 # the list of possible encodings.
650
651 INPUT_ENCODING = UTF-8
652
653 # If the value of the INPUT tag contains directories, you can use the
654 # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
655 # and *.h) to filter out the source-files in the directories. If left
656 # blank the following patterns are tested:
657 # *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh
658 # *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py
659 # *.f90 *.f *.for *.vhd *.vhdl
660
661 FILE_PATTERNS =
662
663 # The RECURSIVE tag can be used to turn specify whether or not subdirectories
664 # should be searched for input files as well. Possible values are YES and NO.
665 # If left blank NO is used.
666
667 RECURSIVE = YES
668
669 # The EXCLUDE tag can be used to specify files and/or directories that should be
670 # excluded from the INPUT source files. This way you can easily exclude a
671 # subdirectory from a directory tree whose root is specified with the INPUT tag.
672 # Note that relative paths are relative to the directory from which doxygen is
673 # run.
674
675 EXCLUDE =
676
677 # The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
678 # directories that are symbolic links (a Unix file system feature) are excluded
679 # from the input.
680
681 EXCLUDE_SYMLINKS = NO
682
683 # If the value of the INPUT tag contains directories, you can use the
684 # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
685 # certain files from those directories. Note that the wildcards are matched
686 # against the file with absolute path, so to exclude all test directories
687 # for example use the pattern */test/*
688
689 EXCLUDE_PATTERNS =
690
691 # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
692 # (namespaces, classes, functions, etc.) that should be excluded from the
693 # output. The symbol name can be a fully qualified name, a word, or if the
694 # wildcard * is used, a substring. Examples: ANamespace, AClass,
695 # AClass::ANamespace, ANamespace::*Test
696
697 EXCLUDE_SYMBOLS =
698
699 # The EXAMPLE_PATH tag can be used to specify one or more files or
700 # directories that contain example code fragments that are included (see
701 # the \include command).
702
703 EXAMPLE_PATH =
704
705 # If the value of the EXAMPLE_PATH tag contains directories, you can use the
706 # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
707 # and *.h) to filter out the source-files in the directories. If left
708 # blank all files are included.
709
710 EXAMPLE_PATTERNS =
711
712 # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
713 # searched for input files to be used with the \include or \dontinclude
714 # commands irrespective of the value of the RECURSIVE tag.
715 # Possible values are YES and NO. If left blank NO is used.
716
717 EXAMPLE_RECURSIVE = NO
718
719 # The IMAGE_PATH tag can be used to specify one or more files or
720 # directories that contain image that are included in the documentation (see
721 # the \image command).
722
723 IMAGE_PATH =
724
725 # The INPUT_FILTER tag can be used to specify a program that doxygen should
726 # invoke to filter for each input file. Doxygen will invoke the filter program
727 # by executing (via popen()) the command <filter> <input-file>, where <filter>
728 # is the value of the INPUT_FILTER tag, and <input-file> is the name of an
729 # input file. Doxygen will then use the output that the filter program writes
730 # to standard output.
731 # If FILTER_PATTERNS is specified, this tag will be
732 # ignored.
733
734 INPUT_FILTER =
735
736 # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
737 # basis.
738 # Doxygen will compare the file name with each pattern and apply the
739 # filter if there is a match.
740 # The filters are a list of the form:
741 # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
742 # info on how filters are used. If FILTER_PATTERNS is empty or if
743 # non of the patterns match the file name, INPUT_FILTER is applied.
744
745 FILTER_PATTERNS =
746
747 # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
748 # INPUT_FILTER) will be used to filter the input files when producing source
749 # files to browse (i.e. when SOURCE_BROWSER is set to YES).
750
751 FILTER_SOURCE_FILES = NO
752
753 # The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
754 # pattern. A pattern will override the setting for FILTER_PATTERN (if any)
755 # and it is also possible to disable source filtering for a specific pattern
756 # using *.ext= (so without naming a filter). This option only has effect when
757 # FILTER_SOURCE_FILES is enabled.
758
759 FILTER_SOURCE_PATTERNS =
760
761 #---------------------------------------------------------------------------
762 # configuration options related to source browsing
763 #---------------------------------------------------------------------------
764
765 # If the SOURCE_BROWSER tag is set to YES then a list of source files will
766 # be generated. Documented entities will be cross-referenced with these sources.
767 # Note: To get rid of all source code in the generated output, make sure also
768 # VERBATIM_HEADERS is set to NO.
769
770 SOURCE_BROWSER = NO
771
772 # Setting the INLINE_SOURCES tag to YES will include the body
773 # of functions and classes directly in the documentation.
774
775 INLINE_SOURCES = NO
776
777 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
778 # doxygen to hide any special comment blocks from generated source code
779 # fragments. Normal C, C++ and Fortran comments will always remain visible.
780
781 STRIP_CODE_COMMENTS = YES
782
783 # If the REFERENCED_BY_RELATION tag is set to YES
784 # then for each documented function all documented
785 # functions referencing it will be listed.
786
787 REFERENCED_BY_RELATION = NO
788
789 # If the REFERENCES_RELATION tag is set to YES
790 # then for each documented function all documented entities
791 # called/used by that function will be listed.
792
793 REFERENCES_RELATION = NO
794
795 # If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
796 # and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
797 # functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
798 # link to the source code.
799 # Otherwise they will link to the documentation.
800
801 REFERENCES_LINK_SOURCE = YES
802
803 # If the USE_HTAGS tag is set to YES then the references to source code
804 # will point to the HTML generated by the htags(1) tool instead of doxygen
805 # built-in source browser. The htags tool is part of GNU's global source
806 # tagging system (see http://www.gnu.org/software/global/global.html). You
807 # will need version 4.8.6 or higher.
808
809 USE_HTAGS = NO
810
811 # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
812 # will generate a verbatim copy of the header file for each class for
813 # which an include is specified. Set to NO to disable this.
814
815 VERBATIM_HEADERS = YES
816
817 #---------------------------------------------------------------------------
818 # configuration options related to the alphabetical class index
819 #---------------------------------------------------------------------------
820
821 # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
822 # of all compounds will be generated. Enable this if the project
823 # contains a lot of classes, structs, unions or interfaces.
824
825 ALPHABETICAL_INDEX = YES
826
827 # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
828 # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
829 # in which this list will be split (can be a number in the range [1..20])
830
831 COLS_IN_ALPHA_INDEX = 5
832
833 # In case all classes in a project start with a common prefix, all
834 # classes will be put under the same header in the alphabetical index.
835 # The IGNORE_PREFIX tag can be used to specify one or more prefixes that
836 # should be ignored while generating the index headers.
837
838 IGNORE_PREFIX =
839
840 #---------------------------------------------------------------------------
841 # configuration options related to the HTML output
842 #---------------------------------------------------------------------------
843
844 # If the GENERATE_HTML tag is set to YES (the default) Doxygen will
845 # generate HTML output.
846
847 GENERATE_HTML = YES
848
849 # The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
850 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
851 # put in front of it. If left blank `html' will be used as the default path.
852
853 HTML_OUTPUT = html
854
855 # The HTML_FILE_EXTENSION tag can be used to specify the file extension for
856 # each generated HTML page (for example: .htm,.php,.asp). If it is left blank
857 # doxygen will generate files with .html extension.
858
859 HTML_FILE_EXTENSION = .html
860
861 # The HTML_HEADER tag can be used to specify a personal HTML header for
862 # each generated HTML page. If it is left blank doxygen will generate a
863 # standard header. Note that when using a custom header you are responsible
864 # for the proper inclusion of any scripts and style sheets that doxygen
865 # needs, which is dependent on the configuration options used.
866 # It is advised to generate a default header using "doxygen -w html
867 # header.html footer.html stylesheet.css YourConfigFile" and then modify
868 # that header. Note that the header is subject to change so you typically
869 # have to redo this when upgrading to a newer version of doxygen or when
870 # changing the value of configuration settings such as GENERATE_TREEVIEW!
871
872 HTML_HEADER =
873
874 # The HTML_FOOTER tag can be used to specify a personal HTML footer for
875 # each generated HTML page. If it is left blank doxygen will generate a
876 # standard footer.
877
878 HTML_FOOTER =
879
880 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading
881 # style sheet that is used by each HTML page. It can be used to
882 # fine-tune the look of the HTML output. If the tag is left blank doxygen
883 # will generate a default style sheet. Note that doxygen will try to copy
884 # the style sheet file to the HTML output directory, so don't put your own
885 # style sheet in the HTML output directory as well, or it will be erased!
886
887 HTML_STYLESHEET =
888
889 # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
890 # other source files which should be copied to the HTML output directory. Note
891 # that these files will be copied to the base HTML output directory. Use the
892 # $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
893 # files. In the HTML_STYLESHEET file, use the file name only. Also note that
894 # the files will be copied as-is; there are no commands or markers available.
895
896 HTML_EXTRA_FILES =
897
898 # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
899 # Doxygen will adjust the colors in the style sheet and background images
900 # according to this color. Hue is specified as an angle on a colorwheel,
901 # see http://en.wikipedia.org/wiki/Hue for more information.
902 # For instance the value 0 represents red, 60 is yellow, 120 is green,
903 # 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
904 # The allowed range is 0 to 359.
905
906 HTML_COLORSTYLE_HUE = 220
907
908 # The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
909 # the colors in the HTML output. For a value of 0 the output will use
910 # grayscales only. A value of 255 will produce the most vivid colors.
911
912 HTML_COLORSTYLE_SAT = 100
913
914 # The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
915 # the luminance component of the colors in the HTML output. Values below
916 # 100 gradually make the output lighter, whereas values above 100 make
917 # the output darker. The value divided by 100 is the actual gamma applied,
918 # so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
919 # and 100 does not change the gamma.
920
921 HTML_COLORSTYLE_GAMMA = 80
922
923 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
924 # page will contain the date and time when the page was generated. Setting
925 # this to NO can help when comparing the output of multiple runs.
926
927 HTML_TIMESTAMP = YES
928
929 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
930 # documentation will contain sections that can be hidden and shown after the
931 # page has loaded.
932
933 HTML_DYNAMIC_SECTIONS = NO
934
935 # With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
936 # entries shown in the various tree structured indices initially; the user
937 # can expand and collapse entries dynamically later on. Doxygen will expand
938 # the tree to such a level that at most the specified number of entries are
939 # visible (unless a fully collapsed tree already exceeds this amount).
940 # So setting the number of entries 1 will produce a full collapsed tree by
941 # default. 0 is a special value representing an infinite number of entries
942 # and will result in a full expanded tree by default.
943
944 HTML_INDEX_NUM_ENTRIES = 100
945
946 # If the GENERATE_DOCSET tag is set to YES, additional index files
947 # will be generated that can be used as input for Apple's Xcode 3
948 # integrated development environment, introduced with OSX 10.5 (Leopard).
949 # To create a documentation set, doxygen will generate a Makefile in the
950 # HTML output directory. Running make will produce the docset in that
951 # directory and running "make install" will install the docset in
952 # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
953 # it at startup.
954 # See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
955 # for more information.
956
957 GENERATE_DOCSET = NO
958
959 # When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
960 # feed. A documentation feed provides an umbrella under which multiple
961 # documentation sets from a single provider (such as a company or product suite)
962 # can be grouped.
963
964 DOCSET_FEEDNAME = "Doxygen generated docs"
965
966 # When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
967 # should uniquely identify the documentation set bundle. This should be a
968 # reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
969 # will append .docset to the name.
970
971 DOCSET_BUNDLE_ID = org.doxygen.Project
972
973 # When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
974 # the documentation publisher. This should be a reverse domain-name style
975 # string, e.g. com.mycompany.MyDocSet.documentation.
976
977 DOCSET_PUBLISHER_ID = org.doxygen.Publisher
978
979 # The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
980
981 DOCSET_PUBLISHER_NAME = Publisher
982
983 # If the GENERATE_HTMLHELP tag is set to YES, additional index files
984 # will be generated that can be used as input for tools like the
985 # Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
986 # of the generated HTML documentation.
987
988 GENERATE_HTMLHELP = NO
989
990 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
991 # be used to specify the file name of the resulting .chm file. You
992 # can add a path in front of the file if the result should not be
993 # written to the html output directory.
994
995 CHM_FILE =
996
997 # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
998 # be used to specify the location (absolute path including file name) of
999 # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
1000 # the HTML help compiler on the generated index.hhp.
1001
1002 HHC_LOCATION =
1003
1004 # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
1005 # controls if a separate .chi index file is generated (YES) or that
1006 # it should be included in the master .chm file (NO).
1007
1008 GENERATE_CHI = NO
1009
1010 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
1011 # is used to encode HtmlHelp index (hhk), content (hhc) and project file
1012 # content.
1013
1014 CHM_INDEX_ENCODING =
1015
1016 # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
1017 # controls whether a binary table of contents is generated (YES) or a
1018 # normal table of contents (NO) in the .chm file.
1019
1020 BINARY_TOC = NO
1021
1022 # The TOC_EXPAND flag can be set to YES to add extra items for group members
1023 # to the contents of the HTML help documentation and to the tree view.
1024
1025 TOC_EXPAND = NO
1026
1027 # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
1028 # QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
1029 # that can be used as input for Qt's qhelpgenerator to generate a
1030 # Qt Compressed Help (.qch) of the generated HTML documentation.
1031
1032 GENERATE_QHP = NO
1033
1034 # If the QHG_LOCATION tag is specified, the QCH_FILE tag can
1035 # be used to specify the file name of the resulting .qch file.
1036 # The path specified is relative to the HTML output folder.
1037
1038 QCH_FILE =
1039
1040 # The QHP_NAMESPACE tag specifies the namespace to use when generating
1041 # Qt Help Project output. For more information please see
1042 # http://doc.trolltech.com/qthelpproject.html#namespace
1043
1044 QHP_NAMESPACE = org.doxygen.Project
1045
1046 # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
1047 # Qt Help Project output. For more information please see
1048 # http://doc.trolltech.com/qthelpproject.html#virtual-folders
1049
1050 QHP_VIRTUAL_FOLDER = doc
1051
1052 # If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
1053 # add. For more information please see
1054 # http://doc.trolltech.com/qthelpproject.html#custom-filters
1055
1056 QHP_CUST_FILTER_NAME =
1057
1058 # The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
1059 # custom filter to add. For more information please see
1060 # <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
1061 # Qt Help Project / Custom Filters</a>.
1062
1063 QHP_CUST_FILTER_ATTRS =
1064
1065 # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
1066 # project's
1067 # filter section matches.
1068 # <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
1069 # Qt Help Project / Filter Attributes</a>.
1070
1071 QHP_SECT_FILTER_ATTRS =
1072
1073 # If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
1074 # be used to specify the location of Qt's qhelpgenerator.
1075 # If non-empty doxygen will try to run qhelpgenerator on the generated
1076 # .qhp file.
1077
1078 QHG_LOCATION =
1079
1080 # If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
1081 # will be generated, which together with the HTML files, form an Eclipse help
1082 # plugin. To install this plugin and make it available under the help contents
1083 # menu in Eclipse, the contents of the directory containing the HTML and XML
1084 # files needs to be copied into the plugins directory of eclipse. The name of
1085 # the directory within the plugins directory should be the same as
1086 # the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
1087 # the help appears.
1088
1089 GENERATE_ECLIPSEHELP = NO
1090
1091 # A unique identifier for the eclipse help plugin. When installing the plugin
1092 # the directory name containing the HTML and XML files should also have
1093 # this name.
1094
1095 ECLIPSE_DOC_ID = org.doxygen.Project
1096
1097 # The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs)
1098 # at top of each HTML page. The value NO (the default) enables the index and
1099 # the value YES disables it. Since the tabs have the same information as the
1100 # navigation tree you can set this option to NO if you already set
1101 # GENERATE_TREEVIEW to YES.
1102
1103 DISABLE_INDEX = NO
1104
1105 # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
1106 # structure should be generated to display hierarchical information.
1107 # If the tag value is set to YES, a side panel will be generated
1108 # containing a tree-like index structure (just like the one that
1109 # is generated for HTML Help). For this to work a browser that supports
1110 # JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
1111 # Windows users are probably better off using the HTML help feature.
1112 # Since the tree basically has the same information as the tab index you
1113 # could consider to set DISABLE_INDEX to NO when enabling this option.
1114
1115 GENERATE_TREEVIEW = NO
1116
1117 # The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values
1118 # (range [0,1..20]) that doxygen will group on one line in the generated HTML
1119 # documentation. Note that a value of 0 will completely suppress the enum
1120 # values from appearing in the overview section.
1121
1122 ENUM_VALUES_PER_LINE = 4
1123
1124 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
1125 # used to set the initial width (in pixels) of the frame in which the tree
1126 # is shown.
1127
1128 TREEVIEW_WIDTH = 250
1129
1130 # When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
1131 # links to external symbols imported via tag files in a separate window.
1132
1133 EXT_LINKS_IN_WINDOW = NO
1134
1135 # Use this tag to change the font size of Latex formulas included
1136 # as images in the HTML documentation. The default is 10. Note that
1137 # when you change the font size after a successful doxygen run you need
1138 # to manually remove any form_*.png images from the HTML output directory
1139 # to force them to be regenerated.
1140
1141 FORMULA_FONTSIZE = 10
1142
1143 # Use the FORMULA_TRANPARENT tag to determine whether or not the images
1144 # generated for formulas are transparent PNGs. Transparent PNGs are
1145 # not supported properly for IE 6.0, but are supported on all modern browsers.
1146 # Note that when changing this option you need to delete any form_*.png files
1147 # in the HTML output before the changes have effect.
1148
1149 FORMULA_TRANSPARENT = YES
1150
1151 # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax
1152 # (see http://www.mathjax.org) which uses client side Javascript for the
1153 # rendering instead of using prerendered bitmaps. Use this if you do not
1154 # have LaTeX installed or if you want to formulas look prettier in the HTML
1155 # output. When enabled you may also need to install MathJax separately and
1156 # configure the path to it using the MATHJAX_RELPATH option.
1157
1158 USE_MATHJAX = NO
1159
1160 # When MathJax is enabled you need to specify the location relative to the
1161 # HTML output directory using the MATHJAX_RELPATH option. The destination
1162 # directory should contain the MathJax.js script. For instance, if the mathjax
1163 # directory is located at the same level as the HTML output directory, then
1164 # MATHJAX_RELPATH should be ../mathjax. The default value points to
1165 # the MathJax Content Delivery Network so you can quickly see the result without
1166 # installing MathJax.
1167 # However, it is strongly recommended to install a local
1168 # copy of MathJax from http://www.mathjax.org before deployment.
1169
1170 MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest
1171
1172 # The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension
1173 # names that should be enabled during MathJax rendering.
1174
1175 MATHJAX_EXTENSIONS =
1176
1177 # When the SEARCHENGINE tag is enabled doxygen will generate a search box
1178 # for the HTML output. The underlying search engine uses javascript
1179 # and DHTML and should work on any modern browser. Note that when using
1180 # HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
1181 # (GENERATE_DOCSET) there is already a search function so this one should
1182 # typically be disabled. For large projects the javascript based search engine
1183 # can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
1184
1185 SEARCHENGINE = YES
1186
1187 # When the SERVER_BASED_SEARCH tag is enabled the search engine will be
1188 # implemented using a PHP enabled web server instead of at the web client
1189 # using Javascript. Doxygen will generate the search PHP script and index
1190 # file to put on the web server. The advantage of the server
1191 # based approach is that it scales better to large projects and allows
1192 # full text search. The disadvantages are that it is more difficult to setup
1193 # and does not have live searching capabilities.
1194
1195 SERVER_BASED_SEARCH = NO
1196
1197 #---------------------------------------------------------------------------
1198 # configuration options related to the LaTeX output
1199 #---------------------------------------------------------------------------
1200
1201 # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
1202 # generate Latex output.
1203
1204 GENERATE_LATEX = YES
1205
1206 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
1207 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
1208 # put in front of it. If left blank `latex' will be used as the default path.
1209
1210 LATEX_OUTPUT = latex
1211
1212 # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
1213 # invoked. If left blank `latex' will be used as the default command name.
1214 # Note that when enabling USE_PDFLATEX this option is only used for
1215 # generating bitmaps for formulas in the HTML output, but not in the
1216 # Makefile that is written to the output directory.
1217
1218 LATEX_CMD_NAME = latex
1219
1220 # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
1221 # generate index for LaTeX. If left blank `makeindex' will be used as the
1222 # default command name.
1223
1224 MAKEINDEX_CMD_NAME = makeindex
1225
1226 # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
1227 # LaTeX documents. This may be useful for small projects and may help to
1228 # save some trees in general.
1229
1230 COMPACT_LATEX = NO
1231
1232 # The PAPER_TYPE tag can be used to set the paper type that is used
1233 # by the printer. Possible values are: a4, letter, legal and
1234 # executive. If left blank a4wide will be used.
1235
1236 PAPER_TYPE = a4
1237
1238 # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
1239 # packages that should be included in the LaTeX output.
1240
1241 EXTRA_PACKAGES =
1242
1243 # The LATEX_HEADER tag can be used to specify a personal LaTeX header for
1244 # the generated latex document. The header should contain everything until
1245 # the first chapter. If it is left blank doxygen will generate a
1246 # standard header. Notice: only use this tag if you know what you are doing!
1247
1248 LATEX_HEADER =
1249
1250 # The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for
1251 # the generated latex document. The footer should contain everything after
1252 # the last chapter. If it is left blank doxygen will generate a
1253 # standard footer. Notice: only use this tag if you know what you are doing!
1254
1255 LATEX_FOOTER =
1256
1257 # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
1258 # is prepared for conversion to pdf (using ps2pdf). The pdf file will
1259 # contain links (just like the HTML output) instead of page references
1260 # This makes the output suitable for online browsing using a pdf viewer.
1261
1262 PDF_HYPERLINKS = YES
1263
1264 # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
1265 # plain latex in the generated Makefile. Set this option to YES to get a
1266 # higher quality PDF documentation.
1267
1268 USE_PDFLATEX = YES
1269
1270 # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
1271 # command to the generated LaTeX files. This will instruct LaTeX to keep
1272 # running if errors occur, instead of asking the user for help.
1273 # This option is also used when generating formulas in HTML.
1274
1275 LATEX_BATCHMODE = NO
1276
1277 # If LATEX_HIDE_INDICES is set to YES then doxygen will not
1278 # include the index chapters (such as File Index, Compound Index, etc.)
1279 # in the output.
1280
1281 LATEX_HIDE_INDICES = NO
1282
1283 # If LATEX_SOURCE_CODE is set to YES then doxygen will include
1284 # source code with syntax highlighting in the LaTeX output.
1285 # Note that which sources are shown also depends on other settings
1286 # such as SOURCE_BROWSER.
1287
1288 LATEX_SOURCE_CODE = NO
1289
1290 # The LATEX_BIB_STYLE tag can be used to specify the style to use for the
1291 # bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See
1292 # http://en.wikipedia.org/wiki/BibTeX for more info.
1293
1294 LATEX_BIB_STYLE = plain
1295
1296 #---------------------------------------------------------------------------
1297 # configuration options related to the RTF output
1298 #---------------------------------------------------------------------------
1299
1300 # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
1301 # The RTF output is optimized for Word 97 and may not look very pretty with
1302 # other RTF readers or editors.
1303
1304 GENERATE_RTF = NO
1305
1306 # The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
1307 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
1308 # put in front of it. If left blank `rtf' will be used as the default path.
1309
1310 RTF_OUTPUT = rtf
1311
1312 # If the COMPACT_RTF tag is set to YES Doxygen generates more compact
1313 # RTF documents. This may be useful for small projects and may help to
1314 # save some trees in general.
1315
1316 COMPACT_RTF = NO
1317
1318 # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
1319 # will contain hyperlink fields. The RTF file will
1320 # contain links (just like the HTML output) instead of page references.
1321 # This makes the output suitable for online browsing using WORD or other
1322 # programs which support those fields.
1323 # Note: wordpad (write) and others do not support links.
1324
1325 RTF_HYPERLINKS = NO
1326
1327 # Load style sheet definitions from file. Syntax is similar to doxygen's
1328 # config file, i.e. a series of assignments. You only have to provide
1329 # replacements, missing definitions are set to their default value.
1330
1331 RTF_STYLESHEET_FILE =
1332
1333 # Set optional variables used in the generation of an rtf document.
1334 # Syntax is similar to doxygen's config file.
1335
1336 RTF_EXTENSIONS_FILE =
1337
1338 #---------------------------------------------------------------------------
1339 # configuration options related to the man page output
1340 #---------------------------------------------------------------------------
1341
1342 # If the GENERATE_MAN tag is set to YES (the default) Doxygen will
1343 # generate man pages
1344
1345 GENERATE_MAN = NO
1346
1347 # The MAN_OUTPUT tag is used to specify where the man pages will be put.
1348 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
1349 # put in front of it. If left blank `man' will be used as the default path.
1350
1351 MAN_OUTPUT = man
1352
1353 # The MAN_EXTENSION tag determines the extension that is added to
1354 # the generated man pages (default is the subroutine's section .3)
1355
1356 MAN_EXTENSION = .3
1357
1358 # If the MAN_LINKS tag is set to YES and Doxygen generates man output,
1359 # then it will generate one additional man file for each entity
1360 # documented in the real man page(s). These additional files
1361 # only source the real man page, but without them the man command
1362 # would be unable to find the correct page. The default is NO.
1363
1364 MAN_LINKS = NO
1365
1366 #---------------------------------------------------------------------------
1367 # configuration options related to the XML output
1368 #---------------------------------------------------------------------------
1369
1370 # If the GENERATE_XML tag is set to YES Doxygen will
1371 # generate an XML file that captures the structure of
1372 # the code including all documentation.
1373
1374 GENERATE_XML = NO
1375
1376 # The XML_OUTPUT tag is used to specify where the XML pages will be put.
1377 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
1378 # put in front of it. If left blank `xml' will be used as the default path.
1379
1380 XML_OUTPUT = xml
1381
1382 # The XML_SCHEMA tag can be used to specify an XML schema,
1383 # which can be used by a validating XML parser to check the
1384 # syntax of the XML files.
1385
1386 XML_SCHEMA =
1387
1388 # The XML_DTD tag can be used to specify an XML DTD,
1389 # which can be used by a validating XML parser to check the
1390 # syntax of the XML files.
1391
1392 XML_DTD =
1393
1394 # If the XML_PROGRAMLISTING tag is set to YES Doxygen will
1395 # dump the program listings (including syntax highlighting
1396 # and cross-referencing information) to the XML output. Note that
1397 # enabling this will significantly increase the size of the XML output.
1398
1399 XML_PROGRAMLISTING = YES
1400
1401 #---------------------------------------------------------------------------
1402 # configuration options for the AutoGen Definitions output
1403 #---------------------------------------------------------------------------
1404
1405 # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
1406 # generate an AutoGen Definitions (see autogen.sf.net) file
1407 # that captures the structure of the code including all
1408 # documentation. Note that this feature is still experimental
1409 # and incomplete at the moment.
1410
1411 GENERATE_AUTOGEN_DEF = NO
1412
1413 #---------------------------------------------------------------------------
1414 # configuration options related to the Perl module output
1415 #---------------------------------------------------------------------------
1416
1417 # If the GENERATE_PERLMOD tag is set to YES Doxygen will
1418 # generate a Perl module file that captures the structure of
1419 # the code including all documentation. Note that this
1420 # feature is still experimental and incomplete at the
1421 # moment.
1422
1423 GENERATE_PERLMOD = NO
1424
1425 # If the PERLMOD_LATEX tag is set to YES Doxygen will generate
1426 # the necessary Makefile rules, Perl scripts and LaTeX code to be able
1427 # to generate PDF and DVI output from the Perl module output.
1428
1429 PERLMOD_LATEX = NO
1430
1431 # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
1432 # nicely formatted so it can be parsed by a human reader.
1433 # This is useful
1434 # if you want to understand what is going on.
1435 # On the other hand, if this
1436 # tag is set to NO the size of the Perl module output will be much smaller
1437 # and Perl will parse it just the same.
1438
1439 PERLMOD_PRETTY = YES
1440
1441 # The names of the make variables in the generated doxyrules.make file
1442 # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
1443 # This is useful so different doxyrules.make files included by the same
1444 # Makefile don't overwrite each other's variables.
1445
1446 PERLMOD_MAKEVAR_PREFIX =
1447
1448 #---------------------------------------------------------------------------
1449 # Configuration options related to the preprocessor
1450 #---------------------------------------------------------------------------
1451
1452 # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
1453 # evaluate all C-preprocessor directives found in the sources and include
1454 # files.
1455
1456 ENABLE_PREPROCESSING = YES
1457
1458 # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
1459 # names in the source code. If set to NO (the default) only conditional
1460 # compilation will be performed. Macro expansion can be done in a controlled
1461 # way by setting EXPAND_ONLY_PREDEF to YES.
1462
1463 MACRO_EXPANSION = NO
1464
1465 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
1466 # then the macro expansion is limited to the macros specified with the
1467 # PREDEFINED and EXPAND_AS_DEFINED tags.
1468
1469 EXPAND_ONLY_PREDEF = NO
1470
1471 # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
1472 # pointed to by INCLUDE_PATH will be searched when a #include is found.
1473
1474 SEARCH_INCLUDES = YES
1475
1476 # The INCLUDE_PATH tag can be used to specify one or more directories that
1477 # contain include files that are not input files but should be processed by
1478 # the preprocessor.
1479
1480 INCLUDE_PATH =
1481
1482 # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
1483 # patterns (like *.h and *.hpp) to filter out the header-files in the
1484 # directories. If left blank, the patterns specified with FILE_PATTERNS will
1485 # be used.
1486
1487 INCLUDE_FILE_PATTERNS =
1488
1489 # The PREDEFINED tag can be used to specify one or more macro names that
1490 # are defined before the preprocessor is started (similar to the -D option of
1491 # gcc). The argument of the tag is a list of macros of the form: name
1492 # or name=definition (no spaces). If the definition and the = are
1493 # omitted =1 is assumed. To prevent a macro definition from being
1494 # undefined via #undef or recursively expanded use the := operator
1495 # instead of the = operator.
1496
1497 PREDEFINED =
1498
1499 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
1500 # this tag can be used to specify a list of macro names that should be expanded.
1501 # The macro definition that is found in the sources will be used.
1502 # Use the PREDEFINED tag if you want to use a different macro definition that
1503 # overrules the definition found in the source code.
1504
1505 EXPAND_AS_DEFINED =
1506
1507 # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
1508 # doxygen's preprocessor will remove all references to function-like macros
1509 # that are alone on a line, have an all uppercase name, and do not end with a
1510 # semicolon, because these will confuse the parser if not removed.
1511
1512 SKIP_FUNCTION_MACROS = YES
1513
1514 #---------------------------------------------------------------------------
1515 # Configuration::additions related to external references
1516 #---------------------------------------------------------------------------
1517
1518 # The TAGFILES option can be used to specify one or more tagfiles. For each
1519 # tag file the location of the external documentation should be added. The
1520 # format of a tag file without this location is as follows:
1521 #
1522 # TAGFILES = file1 file2 ...
1523 # Adding location for the tag files is done as follows:
1524 #
1525 # TAGFILES = file1=loc1 "file2 = loc2" ...
1526 # where "loc1" and "loc2" can be relative or absolute paths
1527 # or URLs. Note that each tag file must have a unique name (where the name does
1528 # NOT include the path). If a tag file is not located in the directory in which
1529 # doxygen is run, you must also specify the path to the tagfile here.
1530
1531 TAGFILES =
1532
1533 # When a file name is specified after GENERATE_TAGFILE, doxygen will create
1534 # a tag file that is based on the input files it reads.
1535
1536 GENERATE_TAGFILE =
1537
1538 # If the ALLEXTERNALS tag is set to YES all external classes will be listed
1539 # in the class index. If set to NO only the inherited external classes
1540 # will be listed.
1541
1542 ALLEXTERNALS = NO
1543
1544 # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1545 # in the modules index. If set to NO, only the current project's groups will
1546 # be listed.
1547
1548 EXTERNAL_GROUPS = YES
1549
1550 # The PERL_PATH should be the absolute path and name of the perl script
1551 # interpreter (i.e. the result of `which perl').
1552
1553 PERL_PATH = /usr/bin/perl
1554
1555 #---------------------------------------------------------------------------
1556 # Configuration options related to the dot tool
1557 #---------------------------------------------------------------------------
1558
1559 # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1560 # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
1561 # or super classes. Setting the tag to NO turns the diagrams off. Note that
1562 # this option also works with HAVE_DOT disabled, but it is recommended to
1563 # install and use dot, since it yields more powerful graphs.
1564
1565 CLASS_DIAGRAMS = YES
1566
1567 # You can define message sequence charts within doxygen comments using the \msc
1568 # command. Doxygen will then run the mscgen tool (see
1569 # http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
1570 # documentation. The MSCGEN_PATH tag allows you to specify the directory where
1571 # the mscgen tool resides. If left empty the tool is assumed to be found in the
1572 # default search path.
1573
1574 MSCGEN_PATH =
1575
1576 # If set to YES, the inheritance and collaboration graphs will hide
1577 # inheritance and usage relations if the target is undocumented
1578 # or is not a class.
1579
1580 HIDE_UNDOC_RELATIONS = YES
1581
1582 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1583 # available from the path. This tool is part of Graphviz, a graph visualization
1584 # toolkit from AT&T and Lucent Bell Labs. The other options in this section
1585 # have no effect if this option is set to NO (the default)
1586
1587 HAVE_DOT = NO
1588
1589 # The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
1590 # allowed to run in parallel. When set to 0 (the default) doxygen will
1591 # base this on the number of processors available in the system. You can set it
1592 # explicitly to a value larger than 0 to get control over the balance
1593 # between CPU load and processing speed.
1594
1595 DOT_NUM_THREADS = 0
1596
1597 # By default doxygen will use the Helvetica font for all dot files that
1598 # doxygen generates. When you want a differently looking font you can specify
1599 # the font name using DOT_FONTNAME. You need to make sure dot is able to find
1600 # the font, which can be done by putting it in a standard location or by setting
1601 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the
1602 # directory containing the font.
1603
1604 DOT_FONTNAME = Helvetica
1605
1606 # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
1607 # The default size is 10pt.
1608
1609 DOT_FONTSIZE = 10
1610
1611 # By default doxygen will tell dot to use the Helvetica font.
1612 # If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to
1613 # set the path where dot can find it.
1614
1615 DOT_FONTPATH =
1616
1617 # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1618 # will generate a graph for each documented class showing the direct and
1619 # indirect inheritance relations. Setting this tag to YES will force the
1620 # CLASS_DIAGRAMS tag to NO.
1621
1622 CLASS_GRAPH = YES
1623
1624 # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1625 # will generate a graph for each documented class showing the direct and
1626 # indirect implementation dependencies (inheritance, containment, and
1627 # class references variables) of the class with other documented classes.
1628
1629 COLLABORATION_GRAPH = YES
1630
1631 # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
1632 # will generate a graph for groups, showing the direct groups dependencies
1633
1634 GROUP_GRAPHS = YES
1635
1636 # If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1637 # collaboration diagrams in a style similar to the OMG's Unified Modeling
1638 # Language.
1639
1640 UML_LOOK = NO
1641
1642 # If the UML_LOOK tag is enabled, the fields and methods are shown inside
1643 # the class node. If there are many fields or methods and many nodes the
1644 # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS
1645 # threshold limits the number of items for each type to make the size more
1646 # managable. Set this to 0 for no limit. Note that the threshold may be
1647 # exceeded by 50% before the limit is enforced.
1648
1649 UML_LIMIT_NUM_FIELDS = 10
1650
1651 # If set to YES, the inheritance and collaboration graphs will show the
1652 # relations between templates and their instances.
1653
1654 TEMPLATE_RELATIONS = NO
1655
1656 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1657 # tags are set to YES then doxygen will generate a graph for each documented
1658 # file showing the direct and indirect include dependencies of the file with
1659 # other documented files.
1660
1661 INCLUDE_GRAPH = YES
1662
1663 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1664 # HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1665 # documented header file showing the documented files that directly or
1666 # indirectly include this file.
1667
1668 INCLUDED_BY_GRAPH = YES
1669
1670 # If the CALL_GRAPH and HAVE_DOT options are set to YES then
1671 # doxygen will generate a call dependency graph for every global function
1672 # or class method. Note that enabling this option will significantly increase
1673 # the time of a run. So in most cases it will be better to enable call graphs
1674 # for selected functions only using the \callgraph command.
1675
1676 CALL_GRAPH = NO
1677
1678 # If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
1679 # doxygen will generate a caller dependency graph for every global function
1680 # or class method. Note that enabling this option will significantly increase
1681 # the time of a run. So in most cases it will be better to enable caller
1682 # graphs for selected functions only using the \callergraph command.
1683
1684 CALLER_GRAPH = NO
1685
1686 # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1687 # will generate a graphical hierarchy of all classes instead of a textual one.
1688
1689 GRAPHICAL_HIERARCHY = YES
1690
1691 # If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
1692 # then doxygen will show the dependencies a directory has on other directories
1693 # in a graphical way. The dependency relations are determined by the #include
1694 # relations between the files in the directories.
1695
1696 DIRECTORY_GRAPH = YES
1697
1698 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1699 # generated by dot. Possible values are svg, png, jpg, or gif.
1700 # If left blank png will be used. If you choose svg you need to set
1701 # HTML_FILE_EXTENSION to xhtml in order to make the SVG files
1702 # visible in IE 9+ (other browsers do not have this requirement).
1703
1704 DOT_IMAGE_FORMAT = png
1705
1706 # If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
1707 # enable generation of interactive SVG images that allow zooming and panning.
1708 # Note that this requires a modern browser other than Internet Explorer.
1709 # Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you
1710 # need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files
1711 # visible. Older versions of IE do not have SVG support.
1712
1713 INTERACTIVE_SVG = NO
1714
1715 # The tag DOT_PATH can be used to specify the path where the dot tool can be
1716 # found. If left blank, it is assumed the dot tool can be found in the path.
1717
1718 DOT_PATH =
1719
1720 # The DOTFILE_DIRS tag can be used to specify one or more directories that
1721 # contain dot files that are included in the documentation (see the
1722 # \dotfile command).
1723
1724 DOTFILE_DIRS =
1725
1726 # The MSCFILE_DIRS tag can be used to specify one or more directories that
1727 # contain msc files that are included in the documentation (see the
1728 # \mscfile command).
1729
1730 MSCFILE_DIRS =
1731
1732 # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
1733 # nodes that will be shown in the graph. If the number of nodes in a graph
1734 # becomes larger than this value, doxygen will truncate the graph, which is
1735 # visualized by representing a node as a red box. Note that doxygen if the
1736 # number of direct children of the root node in a graph is already larger than
1737 # DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
1738 # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
1739
1740 DOT_GRAPH_MAX_NODES = 50
1741
1742 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1743 # graphs generated by dot. A depth value of 3 means that only nodes reachable
1744 # from the root by following a path via at most 3 edges will be shown. Nodes
1745 # that lay further from the root node will be omitted. Note that setting this
1746 # option to 1 or 2 may greatly reduce the computation time needed for large
1747 # code bases. Also note that the size of a graph can be further restricted by
1748 # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
1749
1750 MAX_DOT_GRAPH_DEPTH = 0
1751
1752 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
1753 # background. This is disabled by default, because dot on Windows does not
1754 # seem to support this out of the box. Warning: Depending on the platform used,
1755 # enabling this option may lead to badly anti-aliased labels on the edges of
1756 # a graph (i.e. they become hard to read).
1757
1758 DOT_TRANSPARENT = NO
1759
1760 # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
1761 # files in one run (i.e. multiple -o and -T options on the command line). This
1762 # makes dot run faster, but since only newer versions of dot (>1.8.10)
1763 # support this, this feature is disabled by default.
1764
1765 DOT_MULTI_TARGETS = YES
1766
1767 # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1768 # generate a legend page explaining the meaning of the various boxes and
1769 # arrows in the dot generated graphs.
1770
1771 GENERATE_LEGEND = YES
1772
1773 # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1774 # remove the intermediate dot files that are used to generate
1775 # the various graphs.
1776
1777 DOT_CLEANUP = YES
This site is hosted by Intevation GmbH (Datenschutzerklärung und Impressum | Privacy Policy and Imprint)