andre@0: /* This Source Code Form is subject to the terms of the Mozilla Public
andre@0:  * License, v. 2.0. If a copy of the MPL was not distributed with this
andre@0:  * file, You can obtain one at http://mozilla.org/MPL/2.0/. */
andre@0: 
andre@0: /*
andre@0:  * Base64 encoding (binary to ascii).
andre@0:  */
andre@0: 
andre@0: #include "nssb64.h"
andre@0: #include "nspr.h"
andre@0: #include "secitem.h"
andre@0: #include "secerr.h"
andre@0: 
andre@0: /*
andre@0:  * XXX See the big comment at the top of nssb64d.c about moving the
andre@0:  * bulk of this code over into NSPR (the PL part).  It all applies
andre@0:  * here but I didn't want to duplicate it, to avoid divergence problems.
andre@0:  */ 
andre@0: 
andre@0: /*
andre@0:  **************************************************************
andre@0:  * XXX Beginning of base64 encoding code to be moved into NSPR.
andre@0:  */
andre@0: 
andre@0: 
andre@0: struct PLBase64EncodeStateStr {
andre@0:     unsigned chunks;
andre@0:     unsigned saved;
andre@0:     unsigned char buf[3];
andre@0: };
andre@0: 
andre@0: /*
andre@0:  * This typedef would belong in the NSPR header file (i.e. plbase64.h).
andre@0:  */
andre@0: typedef struct PLBase64EncoderStr PLBase64Encoder;
andre@0: 
andre@0: /*
andre@0:  * The following implementation of base64 encoding was based on code
andre@0:  * found in libmime (specifically, in mimeenc.c).  It has been adapted to
andre@0:  * use PR types and naming as well as to provide other necessary semantics
andre@0:  * (like buffer-in/buffer-out in addition to "streaming" without undue
andre@0:  * performance hit of extra copying if you made the buffer versions
andre@0:  * use the output_fn).  It also incorporates some aspects of the current
andre@0:  * NSPR base64 encoding code.  As such, you may find similarities to
andre@0:  * both of those implementations.  I tried to use names that reflected
andre@0:  * the original code when possible.  For this reason you may find some
andre@0:  * inconsistencies -- libmime used lots of "in" and "out" whereas the
andre@0:  * NSPR version uses "src" and "dest"; sometimes I changed one to the other
andre@0:  * and sometimes I left them when I thought the subroutines were at least
andre@0:  * self-consistent.
andre@0:  */
andre@0: 
andre@0: PR_BEGIN_EXTERN_C
andre@0: 
andre@0: /*
andre@0:  * Opaque object used by the encoder to store state.
andre@0:  */
andre@0: struct PLBase64EncoderStr {
andre@0:     /*
andre@0:      * The one or two bytes pending.  (We need 3 to create a "token",
andre@0:      * and hold the leftovers here.  in_buffer_count is *only* ever
andre@0:      * 0, 1, or 2.
andre@0:      */
andre@0:     unsigned char in_buffer[2];
andre@0:     int in_buffer_count;
andre@0: 
andre@0:     /*
andre@0:      * If the caller wants linebreaks added, line_length specifies
andre@0:      * where they come out.  It must be a multiple of 4; if the caller
andre@0:      * provides one that isn't, we round it down to the nearest
andre@0:      * multiple of 4.
andre@0:      *
andre@0:      * The value of current_column counts how many characters have been
andre@0:      * added since the last linebreaks (or since the beginning, on the
andre@0:      * first line).  It is also always a multiple of 4; it is unused when
andre@0:      * line_length is 0.
andre@0:      */ 
andre@0:     PRUint32 line_length;
andre@0:     PRUint32 current_column;
andre@0: 
andre@0:     /*
andre@0:      * Where to write the encoded data (used when streaming, not when
andre@0:      * doing all in-memory (buffer) operations).
andre@0:      *
andre@0:      * Note that this definition is chosen to be compatible with PR_Write.
andre@0:      */
andre@0:     PRInt32 (*output_fn) (void *output_arg, const char *buf, PRInt32 size);
andre@0:     void *output_arg;
andre@0: 
andre@0:     /*
andre@0:      * Where the encoded output goes -- either temporarily (in the streaming
andre@0:      * case, staged here before it goes to the output function) or what will
andre@0:      * be the entire buffered result for users of the buffer version.
andre@0:      */
andre@0:     char *output_buffer;
andre@0:     PRUint32 output_buflen;	/* the total length of allocated buffer */
andre@0:     PRUint32 output_length;	/* the length that is currently populated */
andre@0: };
andre@0: 
andre@0: PR_END_EXTERN_C
andre@0: 
andre@0: 
andre@0: /*
andre@0:  * Table to convert a binary value to its corresponding ascii "code".
andre@0:  */
andre@0: static unsigned char base64_valuetocode[64] =
andre@0:     "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/";
andre@0: 
andre@0: #define B64_PAD	'='
andre@0: #define B64_CR	'\r'
andre@0: #define B64_LF	'\n'
andre@0: 
andre@0: static PRStatus
andre@0: pl_base64_encode_buffer (PLBase64Encoder *data, const unsigned char *in,
andre@0: 			 PRUint32 size)
andre@0: {
andre@0:     const unsigned char *end = in + size;
andre@0:     char *out = data->output_buffer + data->output_length;
andre@0:     unsigned int i = data->in_buffer_count;
andre@0:     PRUint32 n = 0;
andre@0:     int off;
andre@0:     PRUint32 output_threshold;
andre@0: 
andre@0:     /* If this input buffer is too small, wait until next time. */
andre@0:     if (size < (3 - i)) {
andre@0: 	data->in_buffer[i++] = in[0];
andre@0: 	if (size > 1)
andre@0: 	    data->in_buffer[i++] = in[1];
andre@0: 	PR_ASSERT(i < 3);
andre@0: 	data->in_buffer_count = i;
andre@0: 	return PR_SUCCESS;
andre@0:     }
andre@0: 
andre@0:     /* If there are bytes that were put back last time, take them now. */
andre@0:     if (i > 0) {
andre@0: 	n = data->in_buffer[0];
andre@0: 	if (i > 1)
andre@0: 	    n = (n << 8) | data->in_buffer[1];
andre@0: 	data->in_buffer_count = 0;
andre@0:     }
andre@0: 
andre@0:     /* If our total is not a multiple of three, put one or two bytes back. */
andre@0:     off = (size + i) % 3;
andre@0:     if (off > 0) {
andre@0: 	size -= off;
andre@0: 	data->in_buffer[0] = in[size];
andre@0: 	if (off > 1)
andre@0: 	    data->in_buffer[1] = in[size + 1];
andre@0: 	data->in_buffer_count = off;
andre@0: 	end -= off;
andre@0:     }
andre@0: 
andre@0:     output_threshold = data->output_buflen - 3;
andre@0: 
andre@0:     /*
andre@0:      * Populate the output buffer with base64 data, one line (or buffer)
andre@0:      * at a time.
andre@0:      */
andre@0:     while (in < end) {
andre@0: 	int j, k;
andre@0: 
andre@0: 	while (i < 3) {
andre@0: 	    n = (n << 8) | *in++;
andre@0: 	    i++;
andre@0: 	}
andre@0: 	i = 0;
andre@0: 
andre@0: 	if (data->line_length > 0) {
andre@0: 	    if (data->current_column >= data->line_length) {
andre@0: 		data->current_column = 0;
andre@0: 		*out++ = B64_CR;
andre@0: 		*out++ = B64_LF;
andre@0: 		data->output_length += 2;
andre@0: 	    }
andre@0: 	    data->current_column += 4;	/* the bytes we are about to add */
andre@0: 	}
andre@0: 
andre@0: 	for (j = 18; j >= 0; j -= 6) {
andre@0: 	    k = (n >> j) & 0x3F;
andre@0: 	    *out++ = base64_valuetocode[k];
andre@0: 	}
andre@0: 	n = 0;
andre@0: 	data->output_length += 4;
andre@0: 
andre@0: 	if (data->output_length >= output_threshold) {
andre@0: 	    PR_ASSERT(data->output_length <= data->output_buflen);
andre@0: 	    if (data->output_fn != NULL) {
andre@0: 		PRInt32 output_result;
andre@0: 
andre@0: 		output_result = data->output_fn (data->output_arg,
andre@0: 						 data->output_buffer,
andre@0: 						 (PRInt32) data->output_length);
andre@0: 		if (output_result < 0)
andre@0: 		    return PR_FAILURE;
andre@0: 
andre@0: 		out = data->output_buffer;
andre@0: 		data->output_length = 0;
andre@0: 	    } else {
andre@0: 		/*
andre@0: 		 * Check that we are about to exit the loop.  (Since we
andre@0: 		 * are over the threshold, there isn't enough room in the
andre@0: 		 * output buffer for another trip around.)
andre@0: 		 */
andre@0: 		PR_ASSERT(in == end);
andre@0: 		if (in < end) {
andre@0: 		    PR_SetError (PR_BUFFER_OVERFLOW_ERROR, 0);
andre@0: 		    return PR_FAILURE;
andre@0: 		}
andre@0: 	    }
andre@0: 	}
andre@0:     }
andre@0: 
andre@0:     return PR_SUCCESS;
andre@0: }
andre@0: 
andre@0: static PRStatus
andre@0: pl_base64_encode_flush (PLBase64Encoder *data)
andre@0: {
andre@0:     int i = data->in_buffer_count;
andre@0: 
andre@0:     if (i == 0 && data->output_length == 0)
andre@0: 	return PR_SUCCESS;
andre@0: 
andre@0:     if (i > 0) {
andre@0: 	char *out = data->output_buffer + data->output_length;
andre@0: 	PRUint32 n;
andre@0: 	int j, k;
andre@0: 
andre@0: 	n = ((PRUint32) data->in_buffer[0]) << 16;
andre@0: 	if (i > 1)
andre@0: 	    n |= ((PRUint32) data->in_buffer[1] << 8);
andre@0: 
andre@0: 	data->in_buffer_count = 0;
andre@0: 
andre@0: 	if (data->line_length > 0) {
andre@0: 	    if (data->current_column >= data->line_length) {
andre@0: 		data->current_column = 0;
andre@0: 		*out++ = B64_CR;
andre@0: 		*out++ = B64_LF;
andre@0: 		data->output_length += 2;
andre@0: 	    }
andre@0: 	}
andre@0: 
andre@0: 	/*
andre@0: 	 * This will fill in more than we really have data for, but the
andre@0: 	 * valid parts will end up in the correct position and the extras
andre@0: 	 * will be over-written with pad characters below.
andre@0: 	 */
andre@0: 	for (j = 18; j >= 0; j -= 6) {
andre@0: 	    k = (n >> j) & 0x3F;
andre@0: 	    *out++ = base64_valuetocode[k];
andre@0: 	}
andre@0: 
andre@0: 	/* Pad with equal-signs. */
andre@0: 	if (i == 1)
andre@0: 	    out[-2] = B64_PAD;
andre@0: 	out[-1] = B64_PAD;
andre@0: 
andre@0: 	data->output_length += 4;
andre@0:     }
andre@0: 
andre@0:     if (data->output_fn != NULL) {
andre@0: 	PRInt32 output_result;
andre@0: 
andre@0: 	output_result = data->output_fn (data->output_arg, data->output_buffer,
andre@0: 					 (PRInt32) data->output_length);
andre@0: 	data->output_length = 0;
andre@0: 
andre@0: 	if (output_result < 0)
andre@0: 	    return PR_FAILURE;
andre@0:     }
andre@0: 
andre@0:     return PR_SUCCESS;
andre@0: }
andre@0: 
andre@0: 
andre@0: /*
andre@0:  * The maximum space needed to hold the output of the encoder given input
andre@0:  * data of length "size", and allowing for CRLF added at least every
andre@0:  * line_length bytes (we will add it at nearest lower multiple of 4).
andre@0:  * There is no trailing CRLF.
andre@0:  */
andre@0: static PRUint32
andre@0: PL_Base64MaxEncodedLength (PRUint32 size, PRUint32 line_length)
andre@0: {
andre@0:     PRUint32 tokens, tokens_per_line, full_lines, line_break_chars, remainder;
andre@0: 
andre@0:     tokens = (size + 2) / 3;
andre@0: 
andre@0:     if (line_length == 0)
andre@0: 	return tokens * 4;
andre@0: 
andre@0:     if (line_length < 4)	/* too small! */
andre@0: 	line_length = 4;
andre@0: 
andre@0:     tokens_per_line = line_length / 4;
andre@0:     full_lines = tokens / tokens_per_line;
andre@0:     remainder = (tokens - (full_lines * tokens_per_line)) * 4;
andre@0:     line_break_chars = full_lines * 2;
andre@0:     if (remainder == 0)
andre@0: 	line_break_chars -= 2;
andre@0: 
andre@0:     return (full_lines * tokens_per_line * 4) + line_break_chars + remainder;
andre@0: }
andre@0: 
andre@0: 
andre@0: /*
andre@0:  * A distinct internal creation function for the buffer version to use.
andre@0:  * (It does not want to specify an output_fn, and we want the normal
andre@0:  * Create function to require that.)  All common initialization of the
andre@0:  * encoding context should be done *here*.
andre@0:  *
andre@0:  * Save "line_length", rounded down to nearest multiple of 4 (if not
andre@0:  * already even multiple).  Allocate output_buffer, if not provided --
andre@0:  * based on given size if specified, otherwise based on line_length.
andre@0:  */
andre@0: static PLBase64Encoder *
andre@0: pl_base64_create_encoder (PRUint32 line_length, char *output_buffer,
andre@0: 			  PRUint32 output_buflen)
andre@0: {
andre@0:     PLBase64Encoder *data;
andre@0:     PRUint32 line_tokens;
andre@0: 
andre@0:     data = PR_NEWZAP(PLBase64Encoder);
andre@0:     if (data == NULL)
andre@0: 	return NULL;
andre@0: 
andre@0:     if (line_length > 0 && line_length < 4)	/* too small! */
andre@0: 	line_length = 4;
andre@0: 
andre@0:     line_tokens = line_length / 4;
andre@0:     data->line_length = line_tokens * 4;
andre@0: 
andre@0:     if (output_buffer == NULL) {
andre@0: 	if (output_buflen == 0) {
andre@0: 	    if (data->line_length > 0)	/* need to include room for CRLF */
andre@0: 		output_buflen = data->line_length + 2;
andre@0: 	    else
andre@0: 		output_buflen = 64;		/* XXX what is a good size? */
andre@0: 	}
andre@0: 
andre@0: 	output_buffer = (char *) PR_Malloc(output_buflen);
andre@0: 	if (output_buffer == NULL) {
andre@0: 	    PR_Free(data);
andre@0: 	    return NULL;
andre@0: 	}
andre@0:     }
andre@0: 
andre@0:     data->output_buffer = output_buffer;
andre@0:     data->output_buflen = output_buflen;
andre@0:     return data;
andre@0: }
andre@0: 
andre@0: /*
andre@0:  * Function to start a base64 encoding context.
andre@0:  * An "output_fn" is required; the "output_arg" parameter to that is optional.
andre@0:  * If linebreaks in the encoded output are desired, "line_length" specifies
andre@0:  * where to place them -- it will be rounded down to the nearest multiple of 4
andre@0:  * (if it is not already an even multiple of 4).  If it is zero, no linebreaks
andre@0:  * will be added.  (FYI, a linebreak is CRLF -- two characters.)
andre@0:  */
andre@0: static PLBase64Encoder *
andre@0: PL_CreateBase64Encoder (PRInt32 (*output_fn) (void *, const char *, PRInt32),
andre@0: 			void *output_arg, PRUint32 line_length)
andre@0: {
andre@0:     PLBase64Encoder *data;
andre@0: 
andre@0:     if (output_fn == NULL) {
andre@0: 	PR_SetError (PR_INVALID_ARGUMENT_ERROR, 0);
andre@0: 	return NULL;
andre@0:     }
andre@0: 
andre@0:     data = pl_base64_create_encoder (line_length, NULL, 0);
andre@0:     if (data == NULL)
andre@0: 	return NULL;
andre@0: 
andre@0:     data->output_fn = output_fn;
andre@0:     data->output_arg = output_arg;
andre@0: 
andre@0:     return data;
andre@0: }
andre@0: 
andre@0: 
andre@0: /*
andre@0:  * Push data through the encoder, causing the output_fn (provided to Create)
andre@0:  * to be called with the encoded data.
andre@0:  */
andre@0: static PRStatus
andre@0: PL_UpdateBase64Encoder (PLBase64Encoder *data, const unsigned char *buffer,
andre@0: 			PRUint32 size)
andre@0: {
andre@0:     /* XXX Should we do argument checking only in debug build? */
andre@0:     if (data == NULL || buffer == NULL || size == 0) {
andre@0: 	PR_SetError (PR_INVALID_ARGUMENT_ERROR, 0);
andre@0: 	return PR_FAILURE;
andre@0:     }
andre@0: 
andre@0:     return pl_base64_encode_buffer (data, buffer, size);
andre@0: }
andre@0: 
andre@0: 
andre@0: /*
andre@0:  * When you're done encoding, call this to free the data.  If "abort_p"
andre@0:  * is false, then calling this may cause the output_fn to be called
andre@0:  * one last time (as the last buffered data is flushed out).
andre@0:  */
andre@0: static PRStatus
andre@0: PL_DestroyBase64Encoder (PLBase64Encoder *data, PRBool abort_p)
andre@0: {
andre@0:     PRStatus status = PR_SUCCESS;
andre@0: 
andre@0:     /* XXX Should we do argument checking only in debug build? */
andre@0:     if (data == NULL) {
andre@0: 	PR_SetError (PR_INVALID_ARGUMENT_ERROR, 0);
andre@0: 	return PR_FAILURE;
andre@0:     }
andre@0: 
andre@0:     /* Flush out the last few buffered characters. */
andre@0:     if (!abort_p)
andre@0: 	status = pl_base64_encode_flush (data);
andre@0: 
andre@0:     if (data->output_buffer != NULL)
andre@0: 	PR_Free(data->output_buffer);
andre@0:     PR_Free(data);
andre@0: 
andre@0:     return status;
andre@0: }
andre@0: 
andre@0: 
andre@0: /*
andre@0:  * Perform base64 encoding from an input buffer to an output buffer.
andre@0:  * The output buffer can be provided (as "dest"); you can also pass in
andre@0:  * a NULL and this function will allocate a buffer large enough for you,
andre@0:  * and return it.  If you do provide the output buffer, you must also
andre@0:  * provide the maximum length of that buffer (as "maxdestlen").
andre@0:  * The actual encoded length of output will be returned to you in
andre@0:  * "output_destlen".
andre@0:  *
andre@0:  * If linebreaks in the encoded output are desired, "line_length" specifies
andre@0:  * where to place them -- it will be rounded down to the nearest multiple of 4
andre@0:  * (if it is not already an even multiple of 4).  If it is zero, no linebreaks
andre@0:  * will be added.  (FYI, a linebreak is CRLF -- two characters.)
andre@0:  *
andre@0:  * Return value is NULL on error, the output buffer (allocated or provided)
andre@0:  * otherwise.
andre@0:  */
andre@0: static char *
andre@0: PL_Base64EncodeBuffer (const unsigned char *src, PRUint32 srclen,
andre@0: 		       PRUint32 line_length, char *dest, PRUint32 maxdestlen,
andre@0: 		       PRUint32 *output_destlen)
andre@0: {
andre@0:     PRUint32 need_length;
andre@0:     PLBase64Encoder *data = NULL;
andre@0:     PRStatus status;
andre@0: 
andre@0:     PR_ASSERT(srclen > 0);
andre@0:     if (srclen == 0)
andre@0: 	return dest;
andre@0: 
andre@0:     /*
andre@0:      * How much space could we possibly need for encoding this input?
andre@0:      */
andre@0:     need_length = PL_Base64MaxEncodedLength (srclen, line_length);
andre@0: 
andre@0:     /*
andre@0:      * Make sure we have at least that much, if output buffer provided.
andre@0:      */
andre@0:     if (dest != NULL) {
andre@0: 	PR_ASSERT(maxdestlen >= need_length);
andre@0: 	if (maxdestlen < need_length) {
andre@0: 	    PR_SetError(PR_BUFFER_OVERFLOW_ERROR, 0);
andre@0: 	    return NULL;
andre@0: 	}
andre@0:     } else {
andre@0: 	maxdestlen = need_length;
andre@0:     }
andre@0: 
andre@0:     data = pl_base64_create_encoder(line_length, dest, maxdestlen);
andre@0:     if (data == NULL)
andre@0: 	return NULL;
andre@0: 
andre@0:     status = pl_base64_encode_buffer (data, src, srclen);
andre@0: 
andre@0:     /*
andre@0:      * We do not wait for Destroy to flush, because Destroy will also
andre@0:      * get rid of our encoder context, which we need to look at first!
andre@0:      */
andre@0:     if (status == PR_SUCCESS)
andre@0: 	status = pl_base64_encode_flush (data);
andre@0: 
andre@0:     if (status != PR_SUCCESS) {
andre@0: 	(void) PL_DestroyBase64Encoder (data, PR_TRUE);
andre@0: 	return NULL;
andre@0:     }
andre@0: 
andre@0:     dest = data->output_buffer;
andre@0: 
andre@0:     /* Must clear this or Destroy will free it. */
andre@0:     data->output_buffer = NULL;
andre@0: 
andre@0:     *output_destlen = data->output_length;
andre@0:     status = PL_DestroyBase64Encoder (data, PR_FALSE);
andre@0:     if (status == PR_FAILURE) {
andre@0: 	PR_Free(dest);
andre@0: 	return NULL;
andre@0:     }
andre@0: 
andre@0:     return dest;
andre@0: }
andre@0: 
andre@0: /*
andre@0:  * XXX End of base64 encoding code to be moved into NSPR.
andre@0:  ********************************************************
andre@0:  */
andre@0: 
andre@0: /*
andre@0:  * This is the beginning of the NSS cover functions.  These will
andre@0:  * provide the interface we want to expose as NSS-ish.  For example,
andre@0:  * they will operate on our Items, do any special handling or checking
andre@0:  * we want to do, etc.
andre@0:  */
andre@0: 
andre@0: 
andre@0: PR_BEGIN_EXTERN_C
andre@0: 
andre@0: /*
andre@0:  * A boring cover structure for now.  Perhaps someday it will include
andre@0:  * some more interesting fields.
andre@0:  */
andre@0: struct NSSBase64EncoderStr {
andre@0:     PLBase64Encoder *pl_data;
andre@0: };
andre@0: 
andre@0: PR_END_EXTERN_C
andre@0: 
andre@0: 
andre@0: /*
andre@0:  * Function to start a base64 encoding context.
andre@0:  */
andre@0: NSSBase64Encoder *
andre@0: NSSBase64Encoder_Create (PRInt32 (*output_fn) (void *, const char *, PRInt32),
andre@0: 			 void *output_arg)
andre@0: {
andre@0:     PLBase64Encoder *pl_data;
andre@0:     NSSBase64Encoder *nss_data;
andre@0: 
andre@0:     nss_data = PORT_ZNew(NSSBase64Encoder);
andre@0:     if (nss_data == NULL)
andre@0: 	return NULL;
andre@0: 
andre@0:     pl_data = PL_CreateBase64Encoder (output_fn, output_arg, 64);
andre@0:     if (pl_data == NULL) {
andre@0: 	PORT_Free(nss_data);
andre@0: 	return NULL;
andre@0:     }
andre@0: 
andre@0:     nss_data->pl_data = pl_data;
andre@0:     return nss_data;
andre@0: }
andre@0: 
andre@0: 
andre@0: /*
andre@0:  * Push data through the encoder, causing the output_fn (provided to Create)
andre@0:  * to be called with the encoded data.
andre@0:  */
andre@0: SECStatus
andre@0: NSSBase64Encoder_Update (NSSBase64Encoder *data, const unsigned char *buffer,
andre@0: 			 PRUint32 size)
andre@0: {
andre@0:     PRStatus pr_status;
andre@0: 
andre@0:     /* XXX Should we do argument checking only in debug build? */
andre@0:     if (data == NULL) {
andre@0: 	PORT_SetError (SEC_ERROR_INVALID_ARGS);
andre@0: 	return SECFailure;
andre@0:     }
andre@0: 
andre@0:     pr_status = PL_UpdateBase64Encoder (data->pl_data, buffer, size);
andre@0:     if (pr_status == PR_FAILURE)
andre@0: 	return SECFailure;
andre@0: 
andre@0:     return SECSuccess;
andre@0: }
andre@0: 
andre@0: 
andre@0: /*
andre@0:  * When you're done encoding, call this to free the data.  If "abort_p"
andre@0:  * is false, then calling this may cause the output_fn to be called
andre@0:  * one last time (as the last buffered data is flushed out).
andre@0:  */
andre@0: SECStatus
andre@0: NSSBase64Encoder_Destroy (NSSBase64Encoder *data, PRBool abort_p)
andre@0: {
andre@0:     PRStatus pr_status;
andre@0: 
andre@0:     /* XXX Should we do argument checking only in debug build? */
andre@0:     if (data == NULL) {
andre@0: 	PORT_SetError (SEC_ERROR_INVALID_ARGS);
andre@0: 	return SECFailure;
andre@0:     }
andre@0: 
andre@0:     pr_status = PL_DestroyBase64Encoder (data->pl_data, abort_p);
andre@0: 
andre@0:     PORT_Free(data);
andre@0: 
andre@0:     if (pr_status == PR_FAILURE)
andre@0: 	return SECFailure;
andre@0: 
andre@0:     return SECSuccess;
andre@0: }
andre@0: 
andre@0: 
andre@0: /*
andre@0:  * Perform base64 encoding of binary data "inItem" to an ascii string.
andre@0:  * The output buffer may be provided (as "outStrOpt"); you can also pass
andre@0:  * in a NULL and the buffer will be allocated for you.  The result will
andre@0:  * be null-terminated, and if the buffer is provided, "maxOutLen" must
andre@0:  * specify the maximum length of the buffer and will be checked to
andre@0:  * supply sufficient space space for the encoded result.  (If "outStrOpt"
andre@0:  * is NULL, "maxOutLen" is ignored.)
andre@0:  *
andre@0:  * If "outStrOpt" is NULL, allocation will happen out of the passed-in
andre@0:  * "arenaOpt", if *it* is non-NULL, otherwise standard allocation (heap)
andre@0:  * will be used.
andre@0:  *
andre@0:  * Return value is NULL on error, the output buffer (allocated or provided)
andre@0:  * otherwise.
andre@0:  */
andre@0: char *
andre@0: NSSBase64_EncodeItem (PLArenaPool *arenaOpt, char *outStrOpt,
andre@0: 		      unsigned int maxOutLen, SECItem *inItem)
andre@0: {
andre@0:     char *out_string = outStrOpt;
andre@0:     PRUint32 max_out_len;
andre@0:     PRUint32 out_len;
andre@0:     void *mark = NULL;
andre@0:     char *dummy;
andre@0: 
andre@0:     PORT_Assert(inItem != NULL && inItem->data != NULL && inItem->len != 0);
andre@0:     if (inItem == NULL || inItem->data == NULL || inItem->len == 0) {
andre@0: 	PORT_SetError (SEC_ERROR_INVALID_ARGS);
andre@0: 	return NULL;
andre@0:     }
andre@0: 
andre@0:     max_out_len = PL_Base64MaxEncodedLength (inItem->len, 64);
andre@0: 
andre@0:     if (arenaOpt != NULL)
andre@0: 	mark = PORT_ArenaMark (arenaOpt);
andre@0: 
andre@0:     if (out_string == NULL) {
andre@0: 	if (arenaOpt != NULL)
andre@0: 	    out_string = PORT_ArenaAlloc (arenaOpt, max_out_len + 1);
andre@0: 	else
andre@0: 	    out_string = PORT_Alloc (max_out_len + 1);
andre@0: 
andre@0: 	if (out_string == NULL) {
andre@0: 	    if (arenaOpt != NULL)
andre@0: 		PORT_ArenaRelease (arenaOpt, mark);
andre@0: 	    return NULL;
andre@0: 	}
andre@0:     } else {
andre@0: 	if ((max_out_len + 1) > maxOutLen) {
andre@0: 	    PORT_SetError (SEC_ERROR_OUTPUT_LEN);
andre@0: 	    return NULL;
andre@0: 	}
andre@0: 	max_out_len = maxOutLen;
andre@0:     }
andre@0: 
andre@0: 
andre@0:     dummy = PL_Base64EncodeBuffer (inItem->data, inItem->len, 64,
andre@0: 				   out_string, max_out_len, &out_len);
andre@0:     if (dummy == NULL) {
andre@0: 	if (arenaOpt != NULL) {
andre@0: 	    PORT_ArenaRelease (arenaOpt, mark);
andre@0: 	} else {
andre@0: 	    PORT_Free (out_string);
andre@0: 	}
andre@0: 	return NULL;
andre@0:     }
andre@0: 
andre@0:     if (arenaOpt != NULL)
andre@0: 	PORT_ArenaUnmark (arenaOpt, mark);
andre@0: 
andre@0:     out_string[out_len] = '\0';
andre@0:     return out_string;
andre@0: }
andre@0: 
andre@0: 
andre@0: /*
andre@0:  * XXX Everything below is deprecated.  If you add new stuff, put it
andre@0:  * *above*, not below.
andre@0:  */
andre@0: 
andre@0: /*
andre@0:  * XXX The following "BTOA" functions are provided for backward compatibility
andre@0:  * with current code.  They should be considered strongly deprecated.
andre@0:  * When we can convert all our code over to using the new NSSBase64Encoder_
andre@0:  * functions defined above, we should get rid of these altogether.  (Remove
andre@0:  * protoypes from base64.h as well -- actually, remove that file completely).
andre@0:  * If someone thinks either of these functions provides such a very useful
andre@0:  * interface (though, as shown, the same functionality can already be
andre@0:  * obtained by calling NSSBase64_EncodeItem directly), fine -- but then
andre@0:  * that API should be provided with a nice new NSSFoo name and using
andre@0:  * appropriate types, etc.
andre@0:  */
andre@0: 
andre@0: #include "base64.h"
andre@0: 
andre@0: /*
andre@0: ** Return an PORT_Alloc'd ascii string which is the base64 encoded
andre@0: ** version of the input string.
andre@0: */
andre@0: char *
andre@0: BTOA_DataToAscii(const unsigned char *data, unsigned int len)
andre@0: {
andre@0:     SECItem binary_item;
andre@0: 
andre@0:     binary_item.data = (unsigned char *)data;
andre@0:     binary_item.len = len;
andre@0: 
andre@0:     return NSSBase64_EncodeItem (NULL, NULL, 0, &binary_item);
andre@0: }
andre@0: 
andre@0: /*
andre@0: ** Convert from binary encoding of an item to ascii.
andre@0: */
andre@0: char *
andre@0: BTOA_ConvertItemToAscii (SECItem *binary_item)
andre@0: {
andre@0:     return NSSBase64_EncodeItem (NULL, NULL, 0, binary_item);
andre@0: }