changeset 929:098282b5432b

clean up and admin-manual/README for orientation doc/trunk@1066 c6561f87-3c4e-4783-a992-168aeb5c3f6f
author Hans Plum <hans.plum@intevation.de>
date Thu, 06 May 2010 08:31:02 +0000
parents 3b67f53ff57b
children a0c54d4edbdf
files doc/ChangeLog doc/README doc/src/do-not-remove-me doc/test-guideline/README doc/tex/Makefile doc/tex/tech-doku.tex
diffstat 6 files changed, 12 insertions(+), 3547 deletions(-) [+]
line wrap: on
line diff
--- a/doc/ChangeLog	Thu May 06 08:17:35 2010 +0000
+++ b/doc/ChangeLog	Thu May 06 08:31:02 2010 +0000
@@ -1,3 +1,10 @@
+2010-05-06  Hans Plum <hans@intevation.de>
+
+	* tex/*, src/*, README:
+	Deleted stubs of documentation.
+
+	* test-guideline/README: Added a README to give user more orientation.
+
 2010-05-06  Hans Plum <hans@intevation.de>
 
 	* admin-manual/installation-artifact-server.tex,
--- a/doc/README	Thu May 06 08:17:35 2010 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,2 +0,0 @@
-Dokumentation des Generischen Viewers
--------------------------------------
--- a/doc/src/do-not-remove-me	Thu May 06 08:17:35 2010 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,1 +0,0 @@
-do not remove me
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/doc/test-guideline/README	Thu May 06 08:31:02 2010 +0000
@@ -0,0 +1,5 @@
+This directory contains a test guideline for the GNV-system.
+So fare, it is just a guideline and not a entire test protocol. 
+Therefore, static test data sets are needed.
+
+For an entry goto "gnv-test-guideline.txt"
--- a/doc/tex/Makefile	Thu May 06 08:17:35 2010 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,3492 +0,0 @@
-# Copyright 2004 Chris Monson (shiblon@gmail.com)
-# Latest version available at http://www.bouncingchairs.net/oss
-#
-#    This file is part of ``Chris Monson's Free Software''.
-#
-#    ``Chris Monson's Free Software'' is free software; you can redistribute it
-#    and/or modify it under the terms of the GNU General Public License as
-#    published by the Free Software Foundation, Version 2.
-#
-#    ``Chris Monson's Free Software'' is distributed in the hope that it will
-#    be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of
-#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General
-#    Public License for more details.
-#
-#    You should have received a copy of the GNU General Public License along
-#    with ``Chris Monson's Free Software''; if not, write to the Free Software
-#    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-#
-#    It is also available on the web at http://www.gnu.org/copyleft/gpl.html
-#
-#    Note that using this makefile to build your documents does NOT place them
-#    under the GPL unless you, the author, specifically do so.  In other words,
-#    I, Chris Monson, the copyright holder and author of this makefile,
-#    consider it impossible to ``link'' to this makefile in any way covered by
-#    the GPL.
-#
-# TO OBTAIN INSTRUCTIONS FOR USING THIS FILE, RUN:
-#    make help
-#
-fileinfo	:= LaTeX Makefile
-author		:= Chris Monson
-version		:= 2.2.0-rc1
-#
-# Note that the user-global version is imported *after* the source directory,
-# so that you can use stuff like ?= to get proper override behavior.
-.PHONY: Makefile GNUmakefile Makefile.ini $(HOME)/.latex-makefile/Makefile.ini
--include Makefile.ini
--include $(HOME)/.latex-makefile/Makefile.ini
-#
-# This can be pdflatex or latex - you can change this by adding the following line to your Makefile.ini:
-# BUILD_STRATEGY := latex
-BUILD_STRATEGY		?= pdflatex
-#
-# Sets LC_ALL=C, by default, so that the locale-aware tools, like sort, be
-# # immune to changes to the locale in the user environment.
-export LC_ALL		?= C
-#
-#
-# If you specify sources here, all other files with the same suffix
-# will be treated as if they were _include_ files.
-#onlysources.tex	?= main.tex
-#onlysources.tex.sh	?=
-#onlysources.tex.pl	?=
-#onlysources.tex.py	?=
-#onlysources.rst	?=
-#onlysources.fig	?=
-#onlysources.gpi	?=
-#onlysources.dot	?=
-#onlysources.xvg	?=
-#onlysources.svg	?=
-#onlysources.eps.gz	?=
-#onlysources.eps	?=
-#
-# If you list files here, they will be treated as _include_ files
-#includes.tex		?= file1.tex file2.tex
-#includes.tex.sh	?=
-#includes.tex.pl	?=
-#includes.tex.py	?=
-#includes.rst		?=
-#includes.fig		?=
-#includes.gpi		?=
-#includes.dot		?=
-#includes.xvg		?=
-#includes.svg		?=
-#includes.eps.gz	?=
-#includes.eps		?=
-#
-# If you list files or wildcards here, they will *not* be cleaned - default is
-# to allow everything to be cleaned.
-#neverclean		?= *.pdf
-#
-# Alternatively (recommended), you can add those lines to a Makefile.ini file
-# and it will get picked up automatically without your having to edit this
-# Makefile.
-#
-# KNOWN ISSUES:
-#	* The following occurs:
-#		file with: \usepackage{named}\bibliographystyle{named}
-#		Compile
-#		change to: \usepackage{apalike}\bibliographystyle{apalike}
-#		Compile again -- BARF!
-#
-#		The workaround: make clean-nographics; make
-#
-#		Note that we may not be able to fix this.  LaTeX itself barfs
-#		on this, not the makefile.  The very first invocation of LaTeX
-#		(when something like this has happened) reads the existing .aux
-#		file and discovers invalid commands like \citeauthoryear that
-#		are only valid in the package that was just removed.  It then
-#		tries to parse them and explodes.  It's not at all clear to me
-#		how to fix this.  I tried removing the .aux files on the first
-#		run of LaTeX, but that necessarily requires more subsequent
-#		rebuilds on common edits.  There does not appear to be a
-#		graceful solution to this issue.
-#
-# CHANGES:
-# Chris Monson (2010-04-08):
-# 	* Bumped version to 2.2.0-rc1
-# 	* Added back in the rst_style_file stuff that got broken when switching
-# 		rst -> tex to use the script mechanism
-# Chris Monson (2010-03-23):
-#	* Bumped version to 2.2.0-beta8
-#	* Work on issue 76: bad backtick escape for some sed versions, failure
-#		to clear out the hold buffer when outputting MISSING comment.
-#		- Backed out 2>&1 to &> (doesn't work in sh)
-#		- Backed out using . to source variables
-# Chris Monson (2010-03-22):
-# 	* Bumped version to 2.2.0-beta7
-# 	* Issue 72: Fix latex/bibtex invocation order for annotated bib styles
-# 	* Fixed informational output to reflect which LaTeX run we're on
-# 	* Fixed graphic detection to include graphics that are already there in
-# 		.d files
-# 	* Tightened up the .d file output to only make .d depend on graphic
-# 		*source* files.  This means that building foo.d no longer
-# 		builds all of the graphics files on which foo.tex depends.
-# 		Had to use .SECONDEXPANSION trickery to make it work.
-# 	* Changed get-graphics to only accept a stem.
-# 	* Fixed build-once logic for scripted .tex to work better
-# 	* Made get-inputs sed script more maintainable.
-# 	* Moved Makefile.ini import up higher.
-# 	* Changed bare stems to not recursively invoke make
-# 	* Updated diff output to be more silent everywhere
-# 	* Added a MISSING comment to the .d file if stuff isn't found - forces
-# 		removal of .1st.make file, which often forces it to try again.
-# 	* Fixed broken graphics-target function
-# 	* Added sleep to .d file generation when stuff is missing - if it
-# 		builds too fast, make doesn't realize it needs to be reloaded,
-# 		and thus never discovers some deeper dependencies (especially
-# 		evident when graphics are included from scripted include
-# 		files).
-# Chris Monson (2010-03-17):
-# 	* Bumped version to 2.2.0-beta6
-# 	* Fixed bareword builds to actually work (requires static patterns)
-# 	* Fixed colorization to work with new paragraph stuff
-# Chris Monson (2010-03-17):
-# 	* Bumped version to 2.2.0-beta5
-# 	* Fixed graphic detection to be much more focused - splits log file
-# 		into paragraphs before doing pattern matching.
-# 	* Fixed make foo to work properly (recursively calls make foo.pdf)
-# 	* Fixed gpi -> pdf generation to not waste time building .eps *after*
-# 		the pdf already exists.
-# 	* Changed log copies to include MAKE_RESTARTS as part of the name.
-# 	* Fixed missing include file detection (also makes use of the paragraph
-# 		stuff) to detect missing scripted include files.
-# Chris Monson (2010-03-16):
-# 	* Bumped version to 2.2.0-beta4
-# 	* issue 70: .pdf not moved out of the way properly on first
-# 		compilation, resulting in early error detection failure.
-# 	* issue 74: fixed broken error on missing .aux files: the
-# 		implementation was masking real errors.
-# Chris Monson (2010-03-15):
-# 	* Bumped version to 2.2.0-beta3
-# 	* issue 71: Made the tput dependency optional
-# 	* issue 73: Made .tex targets not pull in .d files (building them from
-# 		scripts should not require a .d)
-# 	* issue 74: Output a much saner error when a .aux file is not produced
-# 		(e.g., when you are typing "make" without arguments in a
-# 		directory with included .tex files that are not named with
-# 		._include_.)
-# Chris Monson (2010-03-11):
-# 	* Bumped version to 2.2.0-beta2
-# 	* Fixed clean-graphics to get rid of intermediate .eps files that may
-# 		be hanging around
-# 	* Added an automatic setting to use eps terminals in pdflatex mode for
-# 		gnuplot if it doesn't understand pdf.
-# 	* issue 66: Removed grayscale generation via magic suffix.  Grayscale
-# 		generation is now only available via GRAY=1
-# 	* issue 68: Added explicit handling of LC_ALL for locale-aware tools
-# 		like "sort"
-# Chris Monson (2010-03-10):
-# 	* Bumped version to 2.2.0-beta1
-# 	* Fixed success message to handle output message in different places
-# 	* Added name of produced file to success message
-# Chris Monson (2010-03-10):
-# 	* Bumped version to 2.2.0-alpha3
-# 	* Added meaningful error message for wrong hyperref options
-# 	* Added meaningful error message for incorrect graphics extensions
-# Chris Monson (2010-03-09):
-# 	* Bumped version to 2.2.0-alpha2
-# 	* Updated graphics handling (gnuplot and fig generate pdf natively)
-# 	* Changed xmgrace to output monochrome natively
-# Chris Monson (2010-03-09):
-# 	* Bumped version to 2.2.0-alpha1 - major change!
-# 	* Support pdflatex natively and by default (issue 6 - a long time coming)
-# 	* Add ability to have a single $HOME/.latex-makefile/Makefile.ini for
-# 		all invocations
-# 	* Reworked graphic inclusion detection so that extensions need not be
-# 		specified for either build strategy (e.g.,
-# 		\includegraphics{test1.eps} -> \includegrahpics{test1})
-# 	* Changed log format to include filenames and line numbers
-# Chris Monson (2010-02-04):
-# 	* Bumped version to 2.1.43
-# 	* All of the following are for issue 63 (thanks to mojoh81):
-# 	* Added documentation about fixing Makefile.ini default target
-# 	* Added perl and python script targets
-# 	* Fixed run logic to allow included .tex files to be scripted (the
-# 		run-again logic now detects missing .tex files, and the MV
-# 		command has been switched out for a command that only invokes
-# 		MV if the files exist)
-# 	* Changed scripted generation to only run once per make invocation
-# 	* Added dependency on expr
-# Chris Monson (2010-01-19):
-# 	* Bumped version to 2.1.42
-# 	* issue 62: Added .brf extension to cleanable files (backrefs)
-# Chris Monson (2010-01-07):
-# 	* Bumped version to 2.1.41
-# 	* issue 60: bad makeindex runs now error out on subsequent tries
-# Chris Monson (2009-12-01):
-# 	* Bumped version to 2.1.40
-# 	* issue 36: build all indices (for e.g., splitidx usage)
-# 	* issue 59: clean up all generated files (including indices)
-# Chris Monson (2009-11-23):
-# 	* Bumped version to 2.1.39
-# 	* issue 57: change ps2pdf invocations to just use gs directly
-# Chris Monson (2009-11-19):
-# 	* Bumped version to 2.1.38
-# 	* issue 57: Added some limited support for Cygwin (spaces in filenames)
-# Chris Monson (2009-11-15):
-# 	* Bumped version to 2.1.37
-# 	* Removed svninfo, since this is now managed by mercurial
-# 	* Fixed typo in changelist
-# 	* Issue 52: added jpg->eps conversion (thanks to brubakee)
-# 	* Issue 54: fix missing Overfull colorization due to lack of a blank
-# 		line preceding the first error.
-#	* Issue 51: remove head.tmp and body.tmp in make clean invocation
-#	* Issue 56: maintain multiple versions of log files (for debugging)
-# Chris Monson (2009-11-14):
-# 	* Bumped version to 2.1.36
-# 	* Issues 53 and 49: added .brf, .mtc, and .maf to the cleanables
-# Chris Monson (2009-11-05):
-# 	* Bumped version to 2.1.35
-# 	* Added nomenclature support (see issue 48)
-# Chris Monson (2009-10-29):
-# 	* Bumped version to 2.1.34
-# 	* Fixed _out_ creation bug introduced in 2.1.33 (it was always created)
-# 	* Fixed erroneous help output for $HOME in BINARY_TARGET_DIR
-# 	* Changed contact email address - bring on the spam!
-# Chris Monson (2009-10-21):
-# 	* Bumped version to 2.1.33
-# 	* Fixed issue 46, adding support for dot2tex (thanks to fdemesmay)
-# 	* Made all_files.* settable in Makefile.ini (using ?= instead of :=)
-# 	* Fixed issue 47, thanks to fdemesmay: add binary copy directory, copy
-# 		dvi, pdf, and ps if it exists
-# Chris Monson (2009-09-25):
-# 	* Bumped version to 2.1.32
-# 	* Fixed so that a changed lol file will cause a rebuild
-# 	* Added .lol files to the cleanable list
-# Chris Monson (2009-09-08):
-# 	* Bumped version to 2.1.31
-# 	* Closed issue 43: evince doesn't notice pdf change w/out touch
-# Chris Monson (2009-08-28):
-# 	* Bumped version to 2.1.30
-# 	* Closed issue 39: Capture multi-line log warnings/errors to output
-# Chris Monson (2009-08-26):
-# 	* Bumped version to 2.1.29
-# 	* Closed issue 42: add svg support using inkscape
-# Chris Monson (2009-08-17):
-# 	* Bumped version to 2.1.28
-# 	* Patch from paul.biggar for issue 38: package warnings are overlooked
-# Chris Monson (2009-08-07):
-# 	* Bumped version to 2.1.27
-# 	* Included patch for issue 37 - removes pdf/ps files before copying,
-# 		allowing some broken viewers to see changes properly.
-# Chris Monson (2009-05-15):
-# 	* Bumped version to 2.1.26
-# 	* Included patch for issue 9 from favonia - detects .fig changes for
-# 		pstex files during regular compilation, so long as the pstex
-# 		has been built at least once with make all-pstex.
-# Chris Monson (2009-03-27):
-# 	* Bumped version to 2.1.25
-# 	* Cleaned up a bunch of variable setting stuff - more stuff is now
-# 		settable from Makefile.ini
-# 	* Cleaned up documentation for various features, especially settable
-# 		variables.
-# 	* issue 28: support for png -> eps conversion (it even looks good!)
-# 	* issue 29: support for "neverclean" files in Makefile.ini
-# 	* issue 30: make ps2pdf14 the default - fall back when not there
-# Chris Monson (2009-03-09):
-# 	* Bumped version to 2.1.24
-# 	* issue 27: xmgrace support (thanks to rolandschulzhd)
-# Chris Monson (2008-10-23):
-# 	* Bumped version to 2.1.23
-# 	* issue 23: fixed _check_programs to not use bash string subs
-# Chris Monson (2008-09-02):
-# 	* Bumped version to 2.1.22
-# 	* Appled patch from Holger <yllohy@googlemail.com> to add include
-# 		sources and some documentation updates.
-# 	* Updated backup_patterns to be a bit more aggressive (also thanks to
-# 		Holger)
-# Chris Monson (2008-08-30):
-# 	* Bumped version to 2.1.21
-# 	* Added ability to specify onlysources.* variables to indicate the only
-# 		files that should *not* be considered includes.  Thanks to Holger
-# 		<yllohy@googlemail.com> for this patch.
-# 	* Added an automatic include of Makefile.ini if it exists.  Allows
-# 		settings to be made outside of this makefile.
-# Chris Monson (2008-05-21):
-# 	* Bumped version to 2.1.20
-# 	* Added manual pstex compilation support (run make all-pstex first)
-# 	* Removed all automatic pstex support.  It was totally breaking
-# 		everything and is very hard to incorporate into the makefile
-# 		concept because it requires LaTeX to *fail* before it can
-# 		determine that it needs the files.
-# Chris Monson (2008-04-17):
-# 	* Bumped version to 2.1.19
-# 	* Changed the pstex build hack to be on by default
-# Chris Monson (2008-04-09):
-# 	* Bumped version to 2.1.18
-# 	* issue 16: fixed pstex build problems, seems nondeterministic.  Added
-# 		gratuitious hack for testing: set PSTEX_BUILD_ALL_HACK=1.
-# Chris Monson (2008-04-09):
-# 	* Bumped version to 2.1.17
-# 	* issue 20: fixed accumulation of <pid>*.make files - wildcard was
-#		refusing to work on files that are very recently created.
-# Chris Monson (2008-04-02):
-# 	* Bumped version to 2.1.16
-# 	* issue 19: Removed the use of "type" to fix broken "echo" settings
-# Chris Monson (2008-03-27):
-# 	* Bumped version to 2.1.15
-# 	* issue 18: Favors binary echo over builtin, as binary understands -n
-# 	* issue 16: Fixed handling of missing pstex_t files in the log
-# 	* issue 9: Added .SECONDARY target for .pstex files
-# Chris Monson (2008-03-21):
-# 	* Bumped version to 2.1.14
-# 	* Fixed broken aux file flattening, which caused included bibs to be
-# 		missed.
-# Chris Monson (2008-03-20):
-# 	* Bumped version to 2.1.13
-# 	* Changed error output colorization to show errors for missing files
-# 		that are not graphics files.
-# Chris Monson (2008-03-20):
-# 	* Bumped version to 2.1.12
-# 	* Fixed a regression introduced in r28 that makes bibtex fail when
-# 		there is no index file present
-# Chris Monson (2008-03-03):
-# 	* Bumped version to 2.1.11
-# 	* Fixed issue 11 (handle index files, reported by abachn)
-# 	* Cleaned up some comments and help text
-# Chris Monson (2008-01-24):
-# 	* Bumped version to 2.1.10
-#	* Fixed to work when 'sh' is a POSIX shell like 'dash'
-# Chris Monson (2007-12-12):
-# 	* Bumped version to 2.1.9
-# 	* Fixed documentation and dependency graph for pstex files
-# Chris Monson (2007-12-12):
-# 	* Bumped version to 2.1.8
-# 	* Added basic pstex_t support for fig files (Issue 9 by favonia)
-# 		I still suggest that psfrag be used instead.
-# Chris Monson (2007-10-16):
-# 	* Bumped version to 2.1.7
-# 	* Removed todo item: allow other comment directives for rst conversion
-# 	* Added ability to use global rst style file _rststyle_._include_.tex
-# 	* Added help text to that effect
-# Chris Monson (2007-05-20):
-# 	* Bumped version to 2.1.6
-# 	* Changed default paper size for rst files
-# 	* Added todo item: fix paper size for rst files
-# 	* Added todo item: allow other comment directives for rst conversion
-# Chris Monson (2007-04-02):
-# 	* Bumped version to 2.1.5
-# 	* Addressed Issue 7, incorrect .gpi.d generation in subdirectories
-# Chris Monson (2007-03-28):
-# 	* Bumped version to 2.1.4
-# 	* Fixed syntax error in dot output
-# Chris Monson (2007-03-01):
-# 	* Bumped version to 2.1.3
-# 	* Added reST to the included documentation
-# 	* Fixed graphics and script generation to be settable in the
-# 		environment.
-# Chris Monson (2007-02-23):
-# 	* Bumped version to 2.1.2
-# 	* Added the ability to generate .tex files from .rst files
-# Chris Monson (2006-10-17):
-# 	* Bumped version to 2.1.1
-# 	* Fixed includes from subdirectories (sed-to-sed slash escape problem)
-# Chris Monson (2006-10-05):
-# 	* Bumped version to 2.1.0 (pretty serious new feature added)
-# 	* New feature: bib files can now be anywhere on the BIBINPUTS path
-# 	* New programs: kpsewhich (with tetex) and xargs (BSD)
-# Chris Monson (2006-09-28):
-# 	* Bumped version to 2.0.9
-# 	* Added ability to parse more than one bibliography
-# Chris Monson (2006-06-01):
-# 	* Bumped version to 2.0.8
-# 	* Added .vrb to the list of cleaned files
-# Chris Monson (2006-04-26):
-# 	* Bumped version to 2.0.7
-# 	* Fixed so that clean-nographics does not remove .gpi.d files
-# 	* Removed jpg -> eps hack (not working properly -- just pre-convert)
-# 	* Fixed so that postscript grayscale can be done with BSD sed
-# Chris Monson (2006-04-25):
-# 	* Bumped version to 2.0.6
-# 	* Fixed so that changed toc, lot, lof, or out causes a rebuild
-# Chris Monson (2006-04-17):
-# 	* Bumped version to 2.0.5
-# 	* Added jpg -> eps conversion target
-# Chris Monson (2006-04-12):
-# 	* Bumped version to 2.0.4
-# 	* Fixed BSD sed invocation to not use \| as a branch delimiter
-# 	* Added a comment section on what is and is not allowed in BSD sed
-# 	* Made paper size handling more robust while I was at it
-# 	* Fixed postscript RGB grayscale to use a weighted average
-# 	* Fixed postscript HSB grayscale to convert to RGB first
-# 	* Fixed a problem with rebuilding .bbl files
-# Chris Monson (2006-04-11):
-# 	* Bumped version to 2.0.3
-# 	* Fixed some BSD sed problems: can't use \n in substitutions
-# Chris Monson (2006-04-10):
-# 	* Bumped version to 2.0.2
-# 	* Once again removed ability to create .tex files from scripts
-# 	* \includeonly works again
-# Chris Monson (2006-04-09):
-# 	* Bumped version to 2.0.1
-# 	* Fixed grayscale postscript handling to be more robust
-# 	* Added ability to generate ._gray_. files from eps and eps.gz
-# 	* Added ability to clean ._gray_.eps files created from .eps files
-# Chris Monson (2006-04-07):
-# 	* Bumped version to 2.0.0
-# 	* Removed clunky ability to create included .tex files from scripts
-# 	* Added note in the help about included tex scripting not working
-# 	* Fixed the .eps generation to delete %.gpihead.make when finished
-# 	* Abandoned designs to use shell variables to create sed scripts
-# 	* Abandoned __default__.tex.sh idea: it causes recursion with %: .
-# 	* Removed web page to-do.  All items are now complete.
-# 	* Added better grayscale conversion for dot figures (direct ps fixup).
-# 	* Include files can now be scripted (at the expense of \includeonly).
-# 	* Updated dependency graph to contain better node names.
-# Chris Monson (2006-04-06):
-# 	* Bumped version to 2.0b3
-# 	* Top level includes now fail if there is no rule to build them
-# 	* A helpful message is printed when they do fail
-# 	* Grayscale has been changed to be ._gray_, other phonies use _ now, too
-# 	* Grayscale handling has been completed
-# 	* Changed _include_stems target to _includes target.
-# 	* Fixed _includes target to be useful by itself.
-# 	* Removed the ability to specify clean and build targets at once
-# 	* Verified that epsfig works fine with current code
-# 	* Fixed included scripts so that they are added to the dep files
-# 	* Fixed so that graphics includes don't happen if they aren't for gpi
-# 	* Fixed dot output to allow grayscale.
-# Chris Monson (2006-04-05):
-#	* Bumped version to 2.0b2
-#	* Removed automatic -gray output.  It needs fixing in a bad way.
-#	* Revamped dependency creation completely.
-#	* Fixed conditional inclusion to actually work (test.nobuild.d, test.d).
-#	* Fixed clean target to remove log targets
-#	* Added the 'monochrome' word for gray gpi output
-#	* Added a _check_gpi_files target that checks for common problems
-#	* Changed the _version target into the version target (no _)
-#	* Added better handling of grayscale files.  Use the .gray.pdf target.
-#	* Fixed testing for rebuilds
-# Chris Monson (2006-04-04):
-#	* Bumped version to 2.0b1
-#	* Changed colorization of output
-#	* Made .auxbbl and .auxtex .make files secondary targets
-#	* Shortened and simplified the final latex invocation loop
-#	* Added version-specific output ($$i vs. $$$$i) in latex loop
-#	* Added a build message for the first .dvi run (Building .dvi (0))
-#	* Removed some build messages that most people don't care about.
-#	* Simplified procedure for user-set colors -- simple text specification
-#	* Fixed diff output to...not output.
-#	* Fixed rerun bug -- detect not only when preceded with LaTeX Warning
-#	* Sped up gpi plotting
-#	* Added error handling and colorized output for gpi failure
-#	* Documented color changing stuff.
-#	* Now sort the flattened aux file to avoid false recompilation needs
-#	* Added clean-nographics target
-#	* Don't remove self.dvi file if self.aux is missing in the log
-#	* Clarified some code.  Did some very minor adjusting.
-# Chris Monson (2006-04-03):
-#	* Bumped version to 2.0a7
-#	* Added .dvi and .ps files as secondary files.
-#	* Fixed handling of multiple run detection when includeonly is in use.
-#	* Added code to flatten .aux files.
-#	* Added more files as .SECONDARY prerequisites to avoid recompilation.
-#	* Fixed the inputs generation to be much simpler and to use pipes.
-#	* Added the dependency graph directly into the makefile.
-#	* Changed flatten-aux to remove \@writefile \relax \newlabel, etc.
-#	* Undid pipe changes with sed usage (BSD sed doesn't know -f-).
-#	* Added a _check_programs target that tells you what your system has.
-#	* Fixed an error in colorization that made unnecessary errors appear
-#	* Added view targets.
-#	* Updated help text.
-#	* Augmented cookies so that .aux can trigger .bbl and .dvi rebuilds
-#	* Added more informative error handling for dvips and ps2pdf
-# Chris Monson (2006-04-02):
-#	* Bumped version to 2.0a6
-#	* Added indirection to .bbl dependencies to avoid rebuilding .bbl files
-#	* Streamlined the diff invocation to eliminate an existence test
-#	* Removed special shell quote escape variables
-#	* Moved includes to a more prominent location
-#	* Fixed .inputs.make to not contain .aux files
-#	* Fixed embedding to use a file instead of always grepping.
-#	* Added *.make.temp to the list of cleanable files
-#	* Fixed Ruby.  It should now be supported properly.
-#	* Now differentiate between all, default, and buildable files.
-#	* Fixed to bail out on serious errors.
-#	* Revised the handling of includable files.  Still working on it.
-# Chris Monson (2006-03-31):
-#	* Bumped version to 2.0a5
-#	* Fixed a bug with LaTeX error detection (there can be spaces)
-#	* Added .bbl support, simplifying everything and making it more correct
-#	* Refactored some tests that muddy the code
-#	* Did a little cleanup of some shell loops that can safely be make loops
-#	* Added support for graphviz .dot files
-#	* Made _all_programs output easier to read
-#	* Added the ruby support that has long been advertised
-#	* Font embedding was screwed up for PostScript -- now implicit
-#	* Changed the generation of -gray.gpi files to a single command
-#	* Changed any make-generated file that is not included from .d to .make
-# Chris Monson (2006-03-30):
-#	* Bumped version to 2.0a4
-#	* Fixed a bug with very long graphics file names
-#	* Added a todo entry for epsfig support
-#	* Fixed a bug paper size bug: sometimes more than one entry appears
-#	* Fixed DVI build echoing to display the number instead of process ID
-#	* DVI files are now removed on first invocation if ANY file is missing
-#	* Added a simple grayscale approach: if a file ends with -gray.gpi, it
-#		is created from the corresponding .gpi file with a special
-#		comment ##GRAY in its header, which causes coloring to be
-#		turned off.
-#	* Fixed a bug in the handling of .tex.sh files.  For some reason I had
-#		neglected to define file stems for scripted output.
-#	* Removed a trailing ; from the %.graphics dependencies
-#	* Added dvips embedding (I think it works, anyway)
-# Chris Monson (2006-03-29):
-#	* Bumped version to 2.0a3
-#	* Fixed error in make 3.79 with MAKEFILE_LIST usage
-#	* Added the presumed filename to the _version output
-#	* Added a vim macro for converting sed scripts to make commands
-#	* Added gpi dependency support (plotting external files and loading gpi)
-#	* Allow .gpi files to be ignored if called .include.gpi or .nobuild.gpi
-#	* Fixed sed invocations where \+ was used.  BSD sed uses \{1,\}.
-# Chris Monson (2006-03-28):
-#	* Bumped version to 2.0a2
-#	* Added SHELL_DEBUG and VERBOSE options
-#	* Changed the default shell back to /bin/sh (unset, in other words)
-#	* Moved .PHONY declarations closer to their targets
-#	* Moved help text into its own define block to obtain better formatting
-#	* Removed need for double-entry when adding a new program invocation
-#	* Moved .SECONDARY declaration closer to its relevant occurrence
-#	* Commented things more heavily
-#	* Added help text about setting terminal and output in gnuplot
-#	* Created more fine-grained clean targets
-#	* Added a %.graphics target that generates all of %'s graphics
-#	* Killed backward-compatible graphics generation (e.g., eps.gpi=gpi.eps)
-#	* For now, we're just GPL 2, not 3.  Maybe it will change later
-#	* Made the version and svninfo into variables
-# Chris Monson (2006-03-27):
-#	* Bumped version to 2.0a1
-#	* Huge, sweeping changes -- automatic dependencies
-
-# IMPORTANT!
-#
-# When adding to the following list, do not introduce any blank lines.  The
-# list is extracted for documentation using sed and is terminated by a blank
-# line.
-#
-# EXTERNAL PROGRAMS:
-# = ESSENTIAL PROGRAMS =
-# == Basic Shell Utilities ==
-CAT		?= cat
-CP		?= cp -f
-DIFF		?= diff
-ECHO		?= echo
-EGREP		?= egrep
-ENV		?= env
-EXPR		?= expr
-MV		?= mv -f
-SED		?= sed
-SORT		?= sort
-TOUCH		?= touch
-UNIQ		?= uniq
-WHICH		?= which
-XARGS		?= xargs
-SLEEP		?= sleep
-# == LaTeX (tetex-provided) ==
-BIBTEX		?= bibtex
-DVIPS		?= dvips
-LATEX		?= latex
-PDFLATEX	?= pdflatex
-EPSTOPDF	?= epstopdf
-MAKEINDEX	?= makeindex
-KPSEWHICH	?= kpsewhich
-GS		?= gs
-# = OPTIONAL PROGRAMS =
-# == Makefile Color Output ==
-TPUT		?= tput
-# == TeX Generation ==
-PERL		?= perl
-PYTHON		?= python
-RST2LATEX	?= rst2latex.py
-# == EPS Generation ==
-CONVERT		?= convert	# ImageMagick
-DOT		?= dot		# GraphViz
-DOT2TEX		?= dot2tex	# dot2tex - add options (not -o) as needed
-FIG2DEV		?= fig2dev	# XFig
-GNUPLOT		?= gnuplot	# GNUplot
-INKSCAPE	?= inkscape	# Inkscape (svg support)
-XMGRACE		?= xmgrace	# XMgrace
-PNGTOPNM	?= pngtopnm	# From NetPBM - step 1 for png -> eps
-PPMTOPGM	?= ppmtopgm	# From NetPBM - (gray) step 2 for png -> eps
-PNMTOPS		?= pnmtops	# From NetPBM - step 3 for png -> eps
-GUNZIP		?= gunzip	# GZipped EPS
-# == Beamer Enlarged Output ==
-PSNUP		?= psnup
-# == Viewing Stuff ==
-VIEW_POSTSCRIPT	?= gv
-VIEW_PDF	?= xpdf
-VIEW_GRAPHICS	?= display
-
-# Command options for embedding fonts and postscript->pdf conversion
-PS_EMBED_OPTIONS	?= -dPDFSETTINGS=/printer -dEmbedAllFonts=true -dSubsetFonts=true -dMaxSubsetPct=100
-PS_COMPATIBILITY	?= 1.4
-
-# Defaults for GPI
-DEFAULT_GPI_EPS_FONTSIZE	?= 22
-DEFAULT_GPI_PDF_FONTSIZE	?= 12
-
-# Style file for ReST
-RST_STYLE_FILE			?= $(wildcard _rststyle_._include_.tex)
-
-# This ensures that even when echo is a shell builtin, we still use the binary
-# (the builtin doesn't always understand -n)
-FIXED_ECHO	:= $(if $(findstring -n,$(shell $(ECHO) -n)),$(shell which echo),$(ECHO))
-ECHO		:= $(if $(FIXED_ECHO),$(FIXED_ECHO),$(ECHO))
-
-define determine-gnuplot-output-extension
-$(if $(shell $(WHICH) $(GNUPLOT)),
-     $(if $(findstring unknown or ambiguous, $(shell $(GNUPLOT) -e "set terminal pdf" 2>&1)),
-	  eps, pdf),
-     none)
-endef
-
-GNUPLOT_OUTPUT_EXTENSION	?= $(strip $(call determine-gnuplot-output-extension))
-
-# Directory into which we place "binaries" if it exists.
-# Note that this can be changed on the commandline or in Makefile.ini:
-#
-# Command line:
-#   make BINARY_TARGET_DIR=$HOME/pdfs myfile.pdf
-#
-# Also, you can specify a relative directory (relative to the Makefile):
-#   make BINARY_TARGET_DIR=pdfs myfile.pdf
-#
-# Or, you can use Makefile.ini:
-#
-#   BINARY_TARGET_DIR := $(HOME)/bin_out
-#
-BINARY_TARGET_DIR	?= _out_
-
-RESTARTS		:= $(if $(MAKE_RESTARTS),$(MAKE_RESTARTS),0)
-# SH NOTES
-#
-# On some systems, /bin/sh, which is the default shell, is not linked to
-# /bin/bash.  While bash is supposed to be sh-compatible when invoked as sh, it
-# just isn't.  This section details some of the things you have to stay away
-# from to remain sh-compatible.
-#
-#	* File pattern expansion does not work for {}
-#	* [ "$x" = "$y" ] has to be [ x"$x" x"$y" ]
-#	* &> for stderr redirection doesn't work, use 2>&1 instead
-#
-# BSD SED NOTES
-#
-# BSD SED is not very nice compared to GNU sed, but it is the most
-# commonly-invoked sed on Macs (being based on BSD), so we have to cater to
-# it or require people to install GNU sed.  It seems like the GNU
-# requirement isn't too bad since this makefile is really a GNU makefile,
-# but apparently GNU sed is much less common than GNU make in general, so
-# I'm supporting it here.
-#
-# Sad experience has taught me the following about BSD sed:
-#
-# 	* \+ is not understood to mean \{1,\}
-# 	* \| is meaningless (does not branch)
-# 	* \n cannot be used as a substitution character
-# 	* ? does not mean \{0,1\}, but is literal
-# 	* a\ works, but only reliably for a single line if subsequent lines
-# 		have forward slashes in them (as is the case in postscript)
-#
-# For more info (on the Mac) you can consult
-#
-# man -M /usr/share/man re_format
-#
-# And look for the word "Obsolete" near the bottom.
-
-#
-# EXTERNAL PROGRAM DOCUMENTATION SCRIPT
-#
-
-# $(call output-all-programs,[<output file>])
-define output-all-programs
-	[ -f '$(this_file)' ] && \
-	$(SED) \
-		-e '/^[[:space:]]*#[[:space:]]*EXTERNAL PROGRAMS:/,/^$$/!d' \
-		-e '/EXTERNAL PROGRAMS/d' \
-		-e '/^$$/d' \
-		-e '/^[[:space:]]*#/i\ '\
-		-e 's/^[[:space:]]*#[[:space:]][^=]*//' \
-		$(this_file) $(if $1,> '$1',) || \
-	$(ECHO) "Cannot determine the name of this makefile."
-endef
-
-# If they misspell gray, it should still work.
-GRAY	?= $(call get-default,$(GREY),)
-
-#
-# Utility Functions and Definitions
-#
-
-# While not exactly a make function, this vim macro is useful.  It takes a
-# verbatim sed script and converts each line to something suitable in a command
-# context.  Just paste the script's contents into the editor, yank this into a
-# register (starting at '0') and run the macro once for each line of the
-# original script:
-#
-# 0i	-e :s/\$/$$/eg
:s/'/'"'"'/eg
^Ela'A' \:noh
j
-
-# don't call this directly - it is here to avoid calling wildcard more than
-# once in remove-files.
-remove-files-helper	= $(if $1,$(RM) $1,$(sh_true))
-
-# $(call remove-files,file1 file2)
-remove-files		= $(call remove-files-helper,$(wildcard $1))
-
-# Removes all cleanable files in the given list
-# $(call clean-files,file1 file2 file3 ...)
-# Works exactly like remove-files, but filters out files in $(neverclean)
-clean-files		= \
-	$(call remove-files-helper,$(call cleanable-files,$(wildcard $1)))
-
-# Outputs all generated files to STDOUT, along with some others that are
-# created by these (e.g., .idx files end up producing .ilg and .ind files).
-# Discovered by reading *.fls OUTPUT lines and producing corresponding .ind
-# filenames as needed.
-#
-# $(call get-generated-names,<source recorder file (*.fls)>)
-define get-generated-names
-[ -f '$1' ] && \
-$(SED) \
-	-e '/^OUTPUT /{' \
-	-e '  s///' \
-	-e '  p' \
-	-e '  s/\.idx/\.ind/p' \
-	-e '  s/\.ind/\.ilg/p' \
-	-e '}' \
-	-e 'd' \
-	'$1' \
-| $(SORT) | $(UNIQ)
-endef
-
-# This removes files without checking whether they are there or not.  This
-# sometimes has to be used when the file is created by a series of shell
-# commands, but there ends up being a race condition: make doesn't know about
-# the file generation as quickly as the system does, so $(wildcard ...) doesn't
-# work right.  Blech.
-# $(call remove-temporary-files,filenames)
-remove-temporary-files	= $(if $1,$(RM) $1,:)
-
-# Create an identifier from a file name
-# $(call cleanse-filename,filename)
-cleanse-filename	= $(subst .,_,$(subst /,__,$1))
-
-# Escape dots
-# $(call escape-dots,str)
-escape-dots		= $(subst .,\\.,$1)
-
-# Test that a file exists
-# $(call test-exists,file)
-test-exists		= [ -e '$1' ]
-
-# $(call move-files,source,destination)
-move-if-exists		= $(call test-exists,$1) && $(MV) '$1' '$2'
-
-# Copy file1 to file2 only if file2 doesn't exist or they are different
-# $(call copy-if-different,sfile,dfile)
-copy-if-different	= $(call test-different,$1,$2) && $(CP) '$1' '$2'
-copy-if-exists		= $(call test-exists,$1) && $(CP) '$1' '$2'
-move-if-different	= $(call test-different,$1,$2) && $(MV) '$1' '$2'
-replace-if-different-and-remove	= \
-	$(call test-different,$1,$2) \
-	&& $(MV) '$1' '$2' \
-	|| $(call remove-files,'$1')
-
-# Note that $(DIFF) returns success when the files are the SAME....
-# $(call test-different,sfile,dfile)
-test-different		= ! $(DIFF) -q '$1' '$2' >/dev/null 2>&1
-test-exists-and-different	= \
-	$(call test-exists,$2) && $(call test-different,$1,$2)
-
-# Return value 1, or value 2 if value 1 is empty
-# $(call get-default,<possibly empty arg>,<default value if empty>)
-get-default	= $(if $1,$1,$2)
-
-# Copy a file and log what's going on
-# $(call copy-with-logging,<source>,<target>)
-define copy-with-logging
-if [ -d '$2/' ]; then \
-	if $(CP) '$1' '$2/'; then \
-		$(ECHO) "$(C_INFO)Copied '$1' to '$2/'$(C_RESET)"; \
-	else \
-		$(ECHO) "$(C_ERROR)Failed to copy '$1' to '$2/'$(C_RESET)"; \
-	fi; \
-fi
-endef
-
-# Gives a reassuring message about the failure to find include files
-# $(call include-message,<list of include files>)
-define include-message
-$(strip \
-$(if $(filter-out $(wildcard $1),$1),\
-	$(shell $(ECHO) \
-	"$(C_INFO)NOTE: You may ignore warnings about the"\
-	"following files:" >&2;\
-	$(ECHO) >&2; \
-	$(foreach s,$(filter-out $(wildcard $1),$1),$(ECHO) '     $s' >&2;)\
-	$(ECHO) "$(C_RESET)" >&2)
-))
-endef
-# Characters that are hard to specify in certain places
-space		:= $(empty) $(empty)
-colon		:= \:
-comma		:= ,
-
-# Useful shell definitions
-sh_true		:= :
-sh_false	:= ! :
-
-# Clear out the standard interfering make suffixes
-.SUFFIXES:
-
-# Turn off forceful rm (RM is usually mapped to rm -f)
-ifdef SAFE_RM
-RM	:= rm
-endif
-
-# Turn command echoing back on with VERBOSE=1
-ifndef VERBOSE
-QUIET	:= @
-endif
-
-# Turn on shell debugging with SHELL_DEBUG=1
-# (EVERYTHING is echoed, even $(shell ...) invocations)
-ifdef SHELL_DEBUG
-SHELL	+= -x
-endif
-
-# Get the name of this makefile (always right in 3.80, often right in 3.79)
-# This is only really used for documentation, so it isn't too serious.
-ifdef MAKEFILE_LIST
-this_file	:= $(word $(words $(MAKEFILE_LIST)),$(MAKEFILE_LIST))
-else
-this_file	:= $(wildcard GNUmakefile makefile Makefile)
-endif
-
-# Terminal color definitions
-
-REAL_TPUT 	:= $(if $(NO_COLOR),,$(shell $(WHICH) $(TPUT)))
-
-# $(call get-term-code,codeinfo)
-# e.g.,
-# $(call get-term-code,setaf 0)
-get-term-code = $(if $(REAL_TPUT),$(shell $(REAL_TPUT) $1),)
-
-black	:= $(call get-term-code,setaf 0)
-red	:= $(call get-term-code,setaf 1)
-green	:= $(call get-term-code,setaf 2)
-yellow	:= $(call get-term-code,setaf 3)
-blue	:= $(call get-term-code,setaf 4)
-magenta	:= $(call get-term-code,setaf 5)
-cyan	:= $(call get-term-code,setaf 6)
-white	:= $(call get-term-code,setaf 7)
-bold	:= $(call get-term-code,bold)
-uline	:= $(call get-term-code,smul)
-reset	:= $(call get-term-code,sgr0)
-
-#
-# User-settable definitions
-#
-LATEX_COLOR_WARNING	?= magenta
-LATEX_COLOR_ERROR	?= red
-LATEX_COLOR_INFO	?= green
-LATEX_COLOR_UNDERFULL	?= magenta
-LATEX_COLOR_OVERFULL	?= red bold
-LATEX_COLOR_PAGES	?= bold
-LATEX_COLOR_BUILD	?= cyan
-LATEX_COLOR_GRAPHIC	?= yellow
-LATEX_COLOR_DEP		?= green
-LATEX_COLOR_SUCCESS	?= green bold
-LATEX_COLOR_FAILURE	?= red bold
-
-# Gets the real color from a simple textual definition like those above
-# $(call get-color,ALL_CAPS_COLOR_NAME)
-# e.g., $(call get-color,WARNING)
-get-color	= $(subst $(space),,$(foreach c,$(LATEX_COLOR_$1),$($c)))
-
-#
-# STANDARD COLORS
-#
-C_WARNING	:= $(call get-color,WARNING)
-C_ERROR		:= $(call get-color,ERROR)
-C_INFO		:= $(call get-color,INFO)
-C_UNDERFULL	:= $(call get-color,UNDERFULL)
-C_OVERFULL	:= $(call get-color,OVERFULL)
-C_PAGES		:= $(call get-color,PAGES)
-C_BUILD		:= $(call get-color,BUILD)
-C_GRAPHIC	:= $(call get-color,GRAPHIC)
-C_DEP		:= $(call get-color,DEP)
-C_SUCCESS	:= $(call get-color,SUCCESS)
-C_FAILURE	:= $(call get-color,FAILURE)
-C_RESET		:= $(reset)
-
-#
-# PRE-BUILD TESTS
-#
-
-# Check that clean targets are not combined with other targets (weird things
-# happen, and it's not easy to fix them)
-hascleangoals	:= $(if $(sort $(filter clean clean-%,$(MAKECMDGOALS))),1)
-hasbuildgoals	:= $(if $(sort $(filter-out clean clean-%,$(MAKECMDGOALS))),1)
-ifneq "$(hasbuildgoals)" ""
-ifneq "$(hascleangoals)" ""
-$(error $(C_ERROR)Clean and build targets specified together$(C_RESET)))
-endif
-endif
-
-#
-# VARIABLE DECLARATIONS
-#
-
-# Names of sed scripts that morph gnuplot files -- only the first found is used
-GNUPLOT_SED	:= global-gpi.sed gnuplot.sed
-GNUPLOT_GLOBAL	:= global._include_.gpi gnuplot.global
-
-ifneq "$(strip $(BUILD_STRATEGY))" "pdflatex"
-default_graphic_extension	?= eps
-latex_build_program		?= $(LATEX)
-build_target_extension		?= dvi
-hyperref_driver_pattern		?= hdvips
-hyperref_driver_error		?= Using dvips: specify ps2pdf in the hyperref options.
-else
-default_graphic_extension	?= pdf
-latex_build_program		?= $(PDFLATEX)
-build_target_extension		?= pdf
-hyperref_driver_pattern		?= hpdf.*
-hyperref_driver_error		?= Using pdflatex: specify pdftex in the hyperref options (or leave it blank).
-endif
-
-# Files of interest
-all_files.tex		?= $(wildcard *.tex)
-all_files.tex.sh	?= $(wildcard *.tex.sh)
-all_files.tex.pl	?= $(wildcard *.tex.pl)
-all_files.tex.py	?= $(wildcard *.tex.py)
-all_files.rst		?= $(wildcard *.rst)
-all_files.fig		?= $(wildcard *.fig)
-all_files.gpi		?= $(wildcard *.gpi)
-all_files.dot		?= $(wildcard *.dot)
-all_files.xvg		?= $(wildcard *.xvg)
-all_files.svg		?= $(wildcard *.svg)
-all_files.png		?= $(wildcard *.png)
-all_files.jpg		?= $(wildcard *.jpg)
-all_files.eps.gz	?= $(wildcard *.eps.gz)
-all_files.eps		?= $(wildcard *.eps)
-
-# Utility function for obtaining all files not specified in $(neverclean)
-# $(call cleanable-files,file1 file2 file3 ...)
-# Returns the list of files that is not in $(wildcard $(neverclean))
-cleanable-files = $(filter-out $(wildcard $(neverclean)), $1)
-
-# Utility function for getting all .$1 files that are to be ignored
-#  * files listed in $(includes.$1)
-#  * files not listed in $(onlysources.$1) if it is defined
-ignore_files = \
-  $(includes.$1) \
-  $(if $(onlysources.$1),$(filter-out $(onlysources.$1), $(all_files.$1)))
-
-# Patterns to never be allowed as source targets
-ignore_patterns	:= %._include_
-
-# Patterns allowed as source targets but not included in 'all' builds
-nodefault_patterns := %._nobuild_ $(ignore_patterns)
-
-# Utility function for getting targets suitable building
-# $(call filter-buildable,suffix)
-filter-buildable	= \
-	$(filter-out $(call ignore_files,$1) \
-		$(addsuffix .$1,$(ignore_patterns)),$(all_files.$1))
-
-# Utility function for getting targets suitable for 'all' builds
-# $(call filter-default,suffix)
-filter-default		= \
-	$(filter-out $(call ignore_files,$1) \
-		$(addsuffix .$1,$(nodefault_patterns)),$(all_files.$1))
-
-# Top level sources that can be built even when they are not by default
-files.tex	:= $(call filter-buildable,tex)
-files.tex.sh	:= $(call filter-buildable,tex.sh)
-files.tex.pl	:= $(call filter-buildable,tex.pl)
-files.tex.py	:= $(call filter-buildable,tex.py)
-files.rst	:= $(call filter-buildable,rst)
-files.gpi	:= $(call filter-buildable,gpi)
-files.dot	:= $(call filter-buildable,dot)
-files.fig	:= $(call filter-buildable,fig)
-files.xvg	:= $(call filter-buildable,xvg)
-files.svg	:= $(call filter-buildable,svg)
-files.png	:= $(call filter-buildable,png)
-files.jpg	:= $(call filter-buildable,jpg)
-files.eps.gz	:= $(call filter-buildable,eps.gz)
-
-# Make all pstex targets secondary.  The pstex_t target requires the pstex
-# target, and nothing else really depends on it, so it often gets deleted.
-# This avoids that by allowing *all* fig files to be pstex targets, which is
-# perfectly valid and causes no problems even if they're going to become eps
-# files in the end.
-.SECONDARY:	$(patsubst %.fig,%.pstex,$(files.fig))
-
-# Top level sources that are built by default targets
-default_files.tex	:= $(call filter-default,tex)
-default_files.tex.sh	:= $(call filter-default,tex.sh)
-default_files.tex.pl	:= $(call filter-default,tex.pl)
-default_files.tex.py	:= $(call filter-default,tex.py)
-default_files.rst	:= $(call filter-default,rst)
-default_files.gpi	:= $(call filter-default,gpi)
-default_files.dot	:= $(call filter-default,dot)
-default_files.fig	:= $(call filter-default,fig)
-default_files.xvg	:= $(call filter-default,xvg)
-default_files.svg	:= $(call filter-default,svg)
-default_files.png	:= $(call filter-default,png)
-default_files.jpg	:= $(call filter-default,jpg)
-default_files.eps.gz	:= $(call filter-default,eps.gz)
-
-# Utility function for creating larger lists of files
-# $(call concat-files,suffixes,[prefix])
-concat-files	= $(foreach s,$1,$($(if $2,$2_,)files.$s))
-
-# Useful file groupings
-all_files_source	:= $(call concat-files,tex,all)
-all_files_scripts	:= $(call concat-files,tex.sh tex.pl tex.py rst,all)
-
-.PHONY: $(all_files_scripts)
-
-default_files_source	:= $(call concat-files,tex,default)
-default_files_scripts	:= $(call concat-files,tex.sh tex.pl tex.py rst,default)
-
-files_source	:= $(call concat-files,tex)
-files_scripts	:= $(call concat-files,tex.sh tex.pl tex.py rst)
-
-# Utility function for obtaining stems
-# $(call get-stems,suffix,[prefix])
-get-stems	= $(sort $($(if $2,$2_,)files.$1:%.$1=%))
-
-# List of all stems (including ._include_ and ._nobuild_ file stems)
-all_stems.tex		:= $(call get-stems,tex,all)
-all_stems.tex.sh	:= $(call get-stems,tex.sh,all)
-all_stems.tex.pl	:= $(call get-stems,tex.pl,all)
-all_stems.tex.py	:= $(call get-stems,tex.py,all)
-all_stems.rst		:= $(call get-stems,rst,all)
-all_stems.fig		:= $(call get-stems,fig,all)
-all_stems.gpi		:= $(call get-stems,gpi,all)
-all_stems.dot		:= $(call get-stems,dot,all)
-all_stems.xvg		:= $(call get-stems,xvg,all)
-all_stems.svg		:= $(call get-stems,svg,all)
-all_stems.png		:= $(call get-stems,png,all)
-all_stems.jpg		:= $(call get-stems,jpg,all)
-all_stems.eps.gz	:= $(call get-stems,eps.gz,all)
-all_stems.eps		:= $(call get-stems,eps,all)
-
-# List of all default stems (all default PDF targets):
-default_stems.tex		:= $(call get-stems,tex,default)
-default_stems.tex.sh		:= $(call get-stems,tex.sh,default)
-default_stems.tex.pl		:= $(call get-stems,tex.pl,default)
-default_stems.tex.py		:= $(call get-stems,tex.py,default)
-default_stems.rst		:= $(call get-stems,rst,default)
-default_stems.fig		:= $(call get-stems,fig,default)
-default_stems.gpi		:= $(call get-stems,gpi,default)
-default_stems.dot		:= $(call get-stems,dot,default)
-default_stems.xvg		:= $(call get-stems,xvg,default)
-default_stems.svg		:= $(call get-stems,svg,default)
-default_stems.png		:= $(call get-stems,png,default)
-default_stems.jpg		:= $(call get-stems,jpg,default)
-default_stems.eps.gz		:= $(call get-stems,eps.gz,default)
-
-# List of all stems (all possible bare PDF targets created here):
-stems.tex		:= $(call get-stems,tex)
-stems.tex.sh		:= $(call get-stems,tex.sh)
-stems.tex.pl		:= $(call get-stems,tex.pl)
-stems.tex.py		:= $(call get-stems,tex.py)
-stems.rst		:= $(call get-stems,rst)
-stems.fig		:= $(call get-stems,fig)
-stems.gpi		:= $(call get-stems,gpi)
-stems.dot		:= $(call get-stems,dot)
-stems.xvg		:= $(call get-stems,xvg)
-stems.svg		:= $(call get-stems,svg)
-stems.png		:= $(call get-stems,png)
-stems.jpg		:= $(call get-stems,jpg)
-stems.eps.gz		:= $(call get-stems,eps.gz)
-
-# Utility function for creating larger lists of stems
-# $(call concat-stems,suffixes,[prefix])
-concat-stems	= $(sort $(foreach s,$1,$($(if $2,$2_,)stems.$s)))
-
-# The most likely to be source but not finished product go first
-graphic_source_extensions	:= fig \
-				   gpi \
-				   xvg \
-				   svg \
-				   dot \
-				   eps.gz
-
-ifneq "$(strip $(BUILD_STRATEGY))" "pdflatex"
-graphic_source_extensions	+= png jpg
-graphic_target_extensions	:= eps ps
-else
-graphic_source_extensions	+= eps
-graphic_target_extensions	:= pdf png jpg mps tif
-endif
-
-all_stems_source	:= $(call concat-stems,tex,all)
-all_stems_script	:= $(call concat-stems,tex.sh tex.pl tex.py rst,all)
-all_stems_graphic	:= $(call concat-stems,$(graphic_source_extensions),all)
-all_stems_ss		:= $(sort $(all_stems_source) $(all_stems_script))
-all_stems_sg		:= $(sort $(all_stems_script))
-all_stems_ssg		:= $(sort $(all_stems_ss))
-
-default_stems_source	:= $(call concat-stems,tex,default)
-default_stems_script	:= $(call concat-stems,tex.sh tex.pl tex.py rst,default)
-default_stems_ss	:= $(sort $(default_stems_source) $(default_stems_script))
-default_stems_sg	:= $(sort $(default_stems_script))
-default_stems_ssg	:= $(sort $(default_stems_ss))
-
-stems_source		:= $(call concat-stems,tex)
-stems_script		:= $(call concat-stems,tex.sh tex.pl tex.py rst)
-stems_graphic		:= $(call concat-stems,$(graphic_source_extensions))
-stems_gg		:= $(sort $(stems_graphic))
-stems_ss		:= $(sort $(stems_source) $(stems_script))
-stems_sg		:= $(sort $(stems_script))
-stems_ssg		:= $(sort $(stems_ss))
-
-# Calculate names that can generate the need for an include file.  We can't
-# really do this with patterns because it's too easy to screw up, so we create
-# an exhaustive list.
-allowed_source_suffixes	:= \
-	pdf \
-	ps \
-	dvi \
-	ind \
-	nls \
-	bbl \
-	aux \
-	aux.make \
-	d \
-	auxbbl.make \
-	_graphics \
-	_show
-allowed_source_patterns		:= $(addprefix %.,$(allowed_source_suffixes))
-
-allowed_graphic_suffixes	:= \
-	pdf \
-	eps \
-	gpihead.make \
-	gpi.d
-allowed_graphic_patterns	:= $(addprefix %.,$(allowed_graphic_suffixes))
-
-# All targets allowed to build documents
-allowed_source_targets	:= \
-	$(foreach suff,$(allowed_source_suffixes),\
-	$(addsuffix .$(suff),$(stems_ssg)))
-
-# All targets allowed to build graphics
-allowed_graphic_targets	:= \
-	$(foreach suff,$(allowed_graphic_suffixes),\
-	$(addsuffix .$(suff),$(stems_gg)))
-
-# All targets that build multiple documents (like 'all')
-allowed_batch_source_targets	:= \
-	all \
-	all-pdf \
-	all-ps \
-	all-dvi \
-	all-bbl \
-	all-ind \
-	all-gls \
-	all-nls \
-	show
-
-# All targets that build multiple graphics (independent of document)
-allowed_batch_graphic_targets	:= \
-	all-graphics \
-	all-pstex \
-	all-dot2tex \
-	show-graphics
-
-# Now we figure out which stuff is available as a make target for THIS RUN.
-real_goals	:= $(call get-default,$(filter-out _includes,$(MAKECMDGOALS)),\
-			all)
-
-specified_source_targets	:= $(strip \
-	$(filter $(allowed_source_targets) $(stems_ssg),$(real_goals)) \
-	)
-
-specified_batch_source_targets	:= $(strip \
-	$(filter $(allowed_batch_source_targets),$(real_goals)) \
-	)
-
-specified_graphic_targets	:= $(strip \
-	$(filter $(allowed_graphic_targets),$(real_goals)) \
-	)
-
-specified_batch_graphic_targets	:= $(strip \
-	$(filter $(allowed_batch_graphic_targets),$(real_goals)) \
-	)
-
-specified_gpi_targets	:= $(patsubst %.gpi,%.$(default_graphic_extension),\
-	$(filter $(patsubst %.$(default_graphic_extension),%.gpi,$(specified_graphic_targets)),\
-		$(all_files.gpi)) \
-	)
-
-# Determine which .d files need including from the information gained above.
-# This is done by first checking whether a batch target exists.  If it does,
-# then all *default* stems are used to create possible includes (nobuild need
-# not apply for batch status).  If no batch targets exist, then the individual
-# targets are considered and appropriate includes are taken from them.
-source_stems_to_include	:= \
-	$(sort\
-	$(if $(specified_batch_source_targets),\
-		$(default_stems_ss),\
-		$(foreach t,$(specified_source_targets),\
-		$(foreach p,$(allowed_source_patterns),\
-			$(patsubst $p,%,$(filter $p $(stems_ssg),$t)) \
-		)) \
-	))
-
-# Determine which .gpi.d files are needed using the above information.  We
-# first check whether a batch target is specified, then check individual
-# graphics that may have been specified.
-graphic_stems_to_include	:= \
-	$(sort\
-	$(if $(specified_batch_graphic_targets),\
-		$(default_stems.gpi),\
-		$(foreach t,$(specified_gpi_targets),\
-		$(foreach p,$(allowed_graphic_patterns),\
-			$(patsubst $p,%,$(filter $p,$t)) \
-		)) \
-	))
-
-# All dependencies for the 'all' targets
-all_pdf_targets		:= $(addsuffix .pdf,$(stems_ssg))
-all_ps_targets		:= $(addsuffix .ps,$(stems_ssg))
-all_dvi_targets		:= $(addsuffix .dvi,$(stems_ssg))
-all_tex_targets		:= $(addsuffix .tex,$(stems_sg))
-all_d_targets		:= $(addsuffix .d,$(stems_ssg))
-all_graphics_targets	:= $(addsuffix .$(default_graphic_extension),$(stems_gg))
-intermediate_graphics_targets	:= $(if $(filter pdf,$(default_graphic_extension)),$(addsuffix .eps,$(stems_gg)),)
-all_pstex_targets	:= $(addsuffix .pstex_t,$(stems.fig))
-all_dot2tex_targets	:= $(addsuffix .dot_t,$(stems.dot))
-
-all_known_graphics	:= $(sort $(all_graphics_targets) $(wildcard *.$(default_graphic_extension)))
-
-default_pdf_targets	:= $(addsuffix .pdf,$(default_stems_ss))
-ifneq "$(strip $(BUILD_STRATEGY))" "pdflatex"
-default_ps_targets	:= $(addsuffix .ps,$(default_stems_ss))
-default_dvi_targets	:= $(addsuffix .dvi,$(default_stems_ss))
-pre_pdf_extensions	:= dvi ps
-endif
-
-# Extensions generated by LaTeX invocation that can be removed when complete
-rm_ext		:= \
-	log *.log aux $(pre_pdf_extensions) pdf blg bbl out nav snm toc lof lot lol pfg \
-	fls vrb idx ind ilg glg glo gls lox nls nlo nlg brf mtc maf brf
-backup_patterns	:= *~ *.bak *.backup body.tmp head.tmp
-
-graph_stem	:= _graph
-
-# All LaTeX-generated files that can be safely removed
-
-rm_tex := \
-	$(foreach e,$(rm_ext),$(addsuffix .$e,$(all_stems_source))) \
-	$(foreach e,$(rm_ext) tex,$(addsuffix .$e,$(all_stems_sg))) \
-	$(addsuffix .log,$(all_ps_targets) $(all_pdf_targets)) \
-	$(addsuffix .*.log,$(stems_graphic))
-
-# These are the files that will affect .gpi transformation for all .gpi files.
-#
-# Use only the first one found.  Backward compatible values are at the end.
-# Note that we use foreach, even though wildcard also returns a list, to ensure
-# that the order in the uppercase variables is preserved.  Directory listings
-# provide no such guarantee, so we avoid relying on them.
-gpi_sed		:= $(strip \
-	$(firstword $(foreach f,$(GNUPLOT_SED),$(wildcard $f))))
-gpi_global	:= $(strip \
-	$(firstword $(foreach f,$(GNUPLOT_GLOBAL),$(wildcard $f))))
-
-#
-# Functions used in generating output
-#
-
-# Outputs all source dependencies to stdout.  The first argument is the file to
-# be parsed, the second is a list of files that will show up as dependencies in
-# the new .d file created here.
-#
-# NOTE: BSD sed does not understand \|, so we have to do something more
-# clunky to extract suitable extensions.
-#
-# Also, we do a little bit of funny rewriting up front (TARGETS=) to make sure
-# that we can properly backslash-escape spaces in file names (e.g, on Cygwin
-# for tex distributions that have "Program Files" in their name).
-#
-# $(call get-inputs,<parsed file>,<target files>)
-define get-inputs
-$(SED) \
--e '/^INPUT/!d' \
--e 's!^INPUT \(\./\)\{0,1\}!!' \
--e 's/[[:space:]]/\\ /g' \
--e 's/\(.*\)\.aux$$/\1.tex/' \
--e '/\.tex$$/b addtargets' \
--e '/\.cls$$/b addtargets' \
--e '/\.sty$$/b addtargets' \
--e '/\.pstex_t$$/b addtargets' \
--e '/\.dot_t$$/b addtargets' \
--e 'd' \
--e ':addtargets' \
--e 's/^/$2: /' \
-$1 | $(SORT) | $(UNIQ)
-endef
-
-# $(call get-missing-inputs,<log file>,<target files>)
-define get-missing-inputs
-$(SED) \
--e '$$ b para' \
--e '/^$$/b para' \
--e 'H' \
--e 'd' \
--e ':para' \
--e 'x' \
--e '/^$$/d' \
--e 's/^\n*//' \
--e '/^! LaTeX Error: File /{' \
--e '  s/^/::DOUBLE_PARAGRAPH::/' \
--e '  h' \
--e '  d' \
--e '}' \
--e 's/^::DOUBLE_PARAGRAPH:://' \
--e '/Default extension: /!d' \
--e 's/[[:space:]]\{1,\}/ /g' \
--e 's/\n\{1,\}/ /g' \
--e 's/^.*File `//' \
--e 's/'"'"' not found\..*//' \
--e '/\.tex/!s/$$/.tex/' \
--e 's/[[:space:]]/\\ /g' \
--e 'h' \
--e 's/.*/# MISSING input "&" - (presence of comment affects build)/' \
--e 'p' \
--e 's/.*//' \
--e 'x' \
--e 's/^/$2: /' \
-$1 | $(SORT) | $(UNIQ)
-endef
-
-# Get source file for specified graphics stem.
-#
-# $(call graphics-source,<stem>)
-define graphics-source
-$(strip $(firstword \
-	$(wildcard \
-		$(addprefix $1.,\
-			$(graphic_source_extensions))) \
-	$1 \
-))
-endef
-
-# Get the target file for the specified graphics file/stem
-#
-# $(call graphics-target,<stem>)
-define graphics-target
-$(strip $(if 	$(filter $(addprefix %.,$(graphic_target_extensions)),$1), $1,
-	$(firstword $(patsubst $(addprefix %.,$(graphic_source_extensions) $(graphic_target_extensions)), %, $1).$(default_graphic_extension) $1.$(default_graphic_extension))))
-endef
-
-# Outputs all of the graphical dependencies to stdout.  The first argument is
-# the stem of the source file being built, the second is a list of suffixes
-# that will show up as dependencies in the generated .d file.
-#
-# Note that we try to escape spaces in filenames where possible.  We have to do
-# it with three backslashes so that as the name percolates through the makefile
-# it eventually ends up with the proper escaping when the build rule is found.
-# Ugly, but it appears to work.  Note that graphicx doesn't allow filenames
-# with spaces, so this could in many ways be moot unless you're using something
-# like grffile.
-#
-# For pdflatex, we really need the missing file to be specified without an
-# extension, otherwise compilation barfs on the first missing file.  Truly
-# annoying, but there you have it.
-#
-# It turns out that the graphics errors, although they have lines with empty
-# space, are only made of two paragraphs.  So, we just use some sed magic to
-# get everything into paragraphs, detect when it's a paragraph that interests
-# us, and double it up.  Then we get the filename only if we're missing
-# extensions (a sign that it's graphicx complaining).
-#
-# $(call get-graphics,<target file stem>)
-#.log,$(addprefix $*.,d $(build_target_extension) _graphics)
-define get-graphics
-$(SED) \
--e '$$ b para' \
--e '/^$$/b para' \
--e 'H' \
--e 'd' \
--e ':para' \
--e 'x' \
--e '/^$$/d' \
--e 's/^\n*//' \
--e '/^! LaTeX Error: File `/{' \
--e '  s/^/::DOUBLE_PARAGRAPH::/' \
--e '  h' \
--e '  d' \
--e '}' \
--e 's/^::DOUBLE_PARAGRAPH:://' \
--e '/could not locate the file with any of these extensions:/{' \
--e '  s/\n\{1,\}/ /g' \
--e '  s/[[:space:]]\{1,\}/ /g' \
--e '  s/^.*File `//' \
--e '  s/'"'"' not found\..*//' \
--e '  h' \
--e '  s/.*/# MISSING stem "&" - (presence of comment affects build)/' \
--e '  p' \
--e '  g' \
--e '  b addtargets' \
--e '}' \
--e '/.*File: \(.*\) Graphic file (type [^)]*).*/{' \
--e '  s//\1/' \
--e '  b addtargets' \
--e '}' \
--e 'd' \
--e ':addtargets' \
--e 's/[[:space:]]/\\\\\\&/g' \
--e 'h' \
--e 's/.*/-include &.gpi.d/' \
--e 'p' \
--e 'g' \
--e 's/.*/$(addprefix $1,.d): $$$$(call graphics-source,&)/' \
--e 'p' \
--e 's/.*//' \
--e 'x' \
--e 's/.*/$(addprefix $1.,$(build_target_extension) _graphics): $$$$(call graphics-target,&)/' \
--e 'p' \
--e 'd' \
-$*.log
-endef
-
-# Checks for build failure due to pstex inclusion, and gives instructions.
-#
-# $(call die-on-pstexs,<parsed file>)
-define die-on-pstexs
-if $(EGREP) -q '^! LaTeX Error: File .*\.pstex.* not found' $1; then \
-	$(ECHO) "$(C_ERROR)Missing pstex_t file(s)$(C_RESET)"; \
-	$(ECHO) "$(C_ERROR)Please run$(C_RESET)"; \
-	$(ECHO) "$(C_ERROR)  make all-pstex$(C_RESET)"; \
-	$(ECHO) "$(C_ERROR)before proceeding.$(C_RESET)"; \
-	exit 1; \
-fi
-endef
-
-# Checks for build failure due to dot2tex, and gives instructions.
-#
-# $(call die-on-dot2tex,<parsed file>)
-define die-on-dot2tex
-if $(EGREP) -q ' LaTeX Error: File .*\.dot_t.* not found' $1; then \
-	$(ECHO) "$(C_ERROR)Missing dot_t file(s)$(C_RESET)"; \
-	$(ECHO) "$(C_ERROR)Please run$(C_RESET)"; \
-	$(ECHO) "$(C_ERROR)  make all-dot2tex$(C_RESET)"; \
-	$(ECHO) "$(C_ERROR)before proceeding.$(C_RESET)"; \
-	exit 1; \
-fi
-endef
-
-# Checks for the existence of a .aux file, and dies with an error message if it
-# isn't there.  Note that we pass the file stem in, not the full filename,
-# e.g., to check for foo.aux, we call it thus: $(call die-on-no-aux,foo)
-#
-# $(call die-on-no-aux,<aux stem>)
-define die-on-no-aux
-if [ ! -e '$1.aux' ]; then \
-	$(call colorize-latex-errors,$1.log); \
-	exit 1; \
-fi
-endef
-
-# Outputs all index files to stdout.  Arg 1 is the source file stem, arg 2 is
-# the list of targets for the discovered dependency.
-#
-# $(call get-log-index,<log file stem>,<target files>)
-define get-log-index
-$(SED) \
--e 's/^No file \(.*\.ind\)\.$$/TARGETS=\1/' \
--e 's/^No file \(.*\.[gn]ls\)\.$$/TARGETS=\1/' \
--e 's/[[:space:]]/\\&/g' \
--e '/^TARGETS=/{' \
--e '  h' \
--e '  s/^TARGETS=/$2: /p' \
--e '  g' \
--e '  s/^TARGETS=\(.*\)/\1: $1.tex/p' \
--e '}' \
--e 'd' \
-'$1.log' | $(SORT) | $(UNIQ)
-endef
-
-
-# Outputs all bibliography files to stdout.  Arg 1 is the source stem, arg 2 is
-# a list of targets for each dependency found.
-#
-# The script kills all lines that do not contain bibdata.  Remaining lines have
-# the \bibdata macro and delimiters removed to create a dependency list.  A
-# trailing comma is added, then all adjacent commas are collapsed into a single
-# comma.  Then commas are replaced with the string .bib[space], and the
-# trailing space is killed off.  Finally, all filename spaces are escaped.
-# This produces a list of space-delimited .bib filenames, which is what the
-# make dep file expects to see.
-#
-# Note that we give kpsewhich a bogus argument so that a failure of sed to
-# produce output will not cause an error.
-#
-# $(call get-bibs,<aux file>,<targets>)
-define get-bibs
-$(SED) \
--e '/^\\bibdata/!d' \
--e 's/\\bibdata{\([^}]*\)}/\1,/' \
--e 's/,\{2,\}/,/g' \
--e 's/[[:space:]]/\\&/g' \
--e 's/,/.bib /g' \
--e 's/ \{1,\}$$//' \
-$1 | $(XARGS) $(KPSEWHICH) '#######' | \
-$(SED) \
--e 's/^/$2: /' | \
-\$(SORT) | $(UNIQ)
-endef
-
-# Makes a an aux file that only has stuff relevant to the target in it
-# $(call make-auxtarget-file,<flattened-aux>,<new-aux>)
-define make-auxtarget-file
-$(SED) \
--e '/^\\newlabel/!d' \
-$1 > $2
-endef
-
-# Makes an aux file that only has stuff relevant to the bbl in it
-# $(call make-auxbbl-file,<flattened-aux>,<new-aux>)
-define make-auxbbl-file
-$(SED) \
--e '/^\\newlabel/d' \
-$1 > $2
-endef
-
-# Makes a .gpi.d file from a .gpi file
-# $(call make-gpi-d,<.gpi>,<.gpi.d>)
-define make-gpi-d
-$(ECHO) '# vim: ft=make' > $2; \
-$(ECHO) 'ifndef INCLUDED_$(call cleanse-filename,$2)' >> $2; \
-$(ECHO) 'INCLUDED_$(call cleanse-filename,$2) := 1' >> $2; \
-$(call get-gpi-deps,$1,$(addprefix $(2:%.gpi.d=%).,$(GNUPLOT_OUTPUT_EXTENSION) gpi.d)) >> $2; \
-$(ECHO) 'endif' >> $2;
-endef
-
-# Parse .gpi files for data and loaded dependencies, output to stdout
-#
-# The sed script here tries to be clever about obtaining valid
-# filenames from the gpi file.  It assumes that the plot command starts its own
-# line, which is not too difficult a constraint to satisfy.
-#
-# This command script also generates 'include' directives for every 'load'
-# command in the .gpi file.  The load command must appear on a line by itself
-# and the file it loads must have the suffix .gpi.  If you don't want it to be
-# compiled when running make graphics, then give it a suffix of ._include_.gpi.
-#
-# $(call get-gpi-deps,<gpi file>,<targets>)
-define get-gpi-deps
-$(SED) \
--e '/^[[:space:]]*s\{0,1\}plot/,/[^\\]$$/{' \
--e ' H' \
--e ' /[^\\]$$/{' \
--e '  s/.*//' \
--e '  x' \
--e '  s/\\\{0,1\}\n//g' \
--e '  s/^[[:space:]]*s\{0,1\}plot[[:space:]]*\(\[[^]]*\][[:space:]]*\)*/,/' \
--e '  s/[[:space:]]*\(['\''"][^'\''"]*['\''"]\)\{0,1\}[^,]*/\1/g' \
--e '  s/,['\''"]-\{0,1\}['\''"]//g' \
--e '  s/[,'\''"]\{1,\}/ /g' \
--e '  s!.*!$2: &!' \
--e '  p' \
--e ' }' \
--e ' d' \
--e '}' \
--e 's/^[[:space:]]*load[[:space:]]*['\''"]\([^'\''"]*\.gpi\)['\''"].*$$/-include \1.d/p' \
--e 'd' \
-$1
-endef
-
-# Colorizes real, honest-to-goodness LaTeX errors that can't be overcome with
-# recompilation.
-#
-# Note that we only ignore file not found errors for things that we know how to
-# build, like graphics files.
-#
-# $(call colorize-latex-errors,<log file>)
-define colorize-latex-errors
-$(SED) \
--e '$$ b para' \
--e '/^$$/b para' \
--e 'H' \
--e 'd' \
--e ':para' \
--e 'x' \
--e '/^$$/d' \
--e 's/^\n*//' \
--e '/^! LaTeX Error: File /{' \
--e '  s/^/::DOUBLE_PARAGRAPH::/' \
--e '  h' \
--e '  d' \
--e '}' \
--e 's/^::DOUBLE_PARAGRAPH:://' \
--e '/could not locate the file with any of these extensions:/d' \
--e '/Missing .begin.document/{' \
--e '  h' \
--e '  s/.*/Are you trying to build an include file?/' \
--e '  x' \
--e '  G' \
--e '}' \
--e '/ LaTeX Error: Cannot determine size/d' \
--e 's/.* LaTeX Error .*/$(C_ERROR)&$(C_RESET)/p' \
--e 's/Error: pdflatex (file .*/$(C_ERROR)& - try specifying it without an extension$(C_RESET)/p' \
--e '/.*\*hyperref using.*driver \(.*\)\*.*/{' \
--e '  s//\1/' \
--e '  /^$(hyperref_driver_pattern)$$/!{' \
--e '    s/.*//' \
--e '    p' \
--e '    s/.*/$(C_ERROR)--- Using incorrect driver for hyperref! ---$(C_RESET)/' \
--e '    p' \
--e '    s/.*/$(C_ERROR)$(hyperref_driver_error)$(C_RESET)/' \
--e '    p' \
--e '  }' \
--e '  d' \
--e '}' \
--e '/ LaTeX Error: Unknown graphics extension/{' \
--e '  s/^/     /' \
--e '  h' \
--e '  s/.*/--- Graphics extension error:/' \
--e '  G' \
--e '  h' \
--e '  s/.*/--- If you specified the extension explicitly in your .tex file, try removing it./' \
--e '  H' \
--e '  g' \
--e '  s/.*/$(C_ERROR)&$(C_RESET)/' \
--e '  p' \
--e '  s/.*//' \
--e '  h' \
--e '  b' \
--e '}' \
--e 's/.*\(\n\{0,\}! .*\)/$(C_ERROR)\1$(C_RESET)/p' \
--e 'd' \
-$1
-endef
-
-# Colorize Makeindex errors
-define colorize-makeindex-errors
-$(SED) \
--e '/^!! /{' \
--e '  N' \
--e '  s/^.*$$/$(C_ERROR)&$(C_RESET)/' \
--e '  p' \
--e '}' \
--e 'd' \
-$1
-endef
-
-# Colorize epstopdf errors
-#
-# $(call colorize-epstopdf-errors,<log file>)
-define colorize-epstopdf-errors
-$(SED) \
--e '/^Error:/,/^Execution stack:/{' \
--e '  /^Execution stack:/d' \
--e '  s/.*/$(C_ERROR)&$(C_RESET)/' \
--e '  p' \
--e '}' \
--e 'd' \
-$1
-endef
-
-# Colorize GNUplot errors
-#
-# $(call colorize-gnuplot-errors,<log file>)
-define colorize-gnuplot-errors
-$(SED) \
--e '/, line [0-9]*:/!{' \
--e '  H' \
--e '  x' \
--e '  s/.*\n\(.*\n.*\)$$/\1/' \
--e '  x' \
--e '}' \
--e '/, line [0-9]*:/{' \
--e '  H' \
--e '  /unknown.*terminal type/{' \
--e '    s/.*/--- Try changing the GNUPLOT_OUTPUT_EXTENSION variable to 'eps'./' \
--e '	H' \
--e '  }' \
--e '  /gpihead/{' \
--e '    s/.*/--- This could be a Makefile bug - contact the maintainer./' \
--e '    H' \
--e '  }' \
--e '  g' \
--e '  s/.*/$(C_ERROR)&$(C_RESET)/' \
--e '  p' \
--e '}' \
--e '/^gnuplot>/,/^$$/{' \
--e '  s/^gnuplot.*/$(C_ERROR)&/' \
--e '  s/^$$/$(C_RESET)/' \
--e '  p' \
--e '}' \
--e 'd' \
-$1
-endef
-
-# Colorize GraphViz errors
-#
-# $(call colorize-dot-errors,<log file>)
-define colorize-dot-errors
-$(SED) \
--e '/^Error:/,/context:/s/.*/$(C_ERROR)&$(C_RESET)/p' \
--e 's/^Warning:.*/$(C_WARNING)&$(C_RESET)/p' \
--e 'd' \
-'$1'
-endef
-
-# Get all important .aux files from the top-level .aux file and merges them all
-# into a single file, which it outputs to stdout.
-#
-# $(call flatten-aux,<toplevel aux>,<output file>)
-define flatten-aux
-$(SED) \
--e '/\\@input{\(.*\)}/{' \
--e     's//\1/' \
--e     's![.:]!\\&!g' \
--e     'h' \
--e     's!.*!\\:\\\\@input{&}:{!' \
--e     'p' \
--e     'x' \
--e     's/\\././g' \
--e     's/.*/r &/p' \
--e     's/.*/d/p' \
--e     's/.*/}/p' \
--e     'd' \
--e '}' \
--e 'd' \
-'$1' > "$1.$$$$.sed.make"; \
-$(SED) -f "$1.$$$$.sed.make" '$1' > "$1.$$$$.make"; \
-$(SED) \
--e '/^\\relax/d' \
--e '/^\\bibcite/d' \
--e 's/^\(\\newlabel{[^}]\{1,\}}\).*/\1/' \
-"$1.$$$$.make" | $(SORT) > '$2'; \
-$(call remove-temporary-files,$1.$$$$.make $1.$$$$.sed.make)
-endef
-
-# Generate pdf from postscript
-#
-# Note that we don't just call ps2pdf, since there are so many versions of that
-# script on various systems.  Instead, we call the postscript interpreter
-# directly.
-#
-# $(call ps2pdf,infile,outfile,[embed fonts])
-define ps2pdf
-	$(GS) \
-		-dSAFER -dCompatibilityLevel=$(PS_COMPATIBILITY) \
-		$(if $3,$(PS_EMBED_OPTIONS)) \
-		-q -dNOPAUSE -dBATCH \
-		-sDEVICE=pdfwrite -sstdout=%stderr \
-		'-sOutputFile=$2' \
-		-dSAFER -dCompatibilityLevel=$(PS_COMPATIBILITY) \
-		$(if $3,$(PS_EMBED_OPTIONS)) \
-		-c .setpdfwrite \
-		-f '$1'
-endef
-
-# Colorize LaTeX output.
-# This uses a neat trick from the Sed & Awk Book from O'Reilly:
-# 1) If a line has a single ending paren, delete it to make a blank line (so
-#	that we catch the first error, which is not always preceded by a blank
-#	line).
-# 2) Ensure that the last line of the file gets appended to the hold buffer,
-# 	and blank it out to trigger end-of-paragraph logic below.
-# 3) When encountering a blank line (LaTeX output helpfully breaks output on
-# 	newlines)
-# 	a) swap the hold buffer (containing the paragraph) into the pattern buffer (putting a blank line into the hold buffer),
-# 	b) remove the newline at the beginning (don't ask),
-# 	c) apply any colorizing substitutions necessary to ensure happiness.
-# 	d) get the newline out of the hold buffer and append it
-# 	e) profit! (print)
-# 4) Anything not colorized is deleted, unless in verbose mode.
-color_tex	:= \
-	$(SED) \
-	-e '$${' \
-	-e '  /^$$/!{' \
-	-e '    H' \
-	-e '    s/.*//' \
-	-e '  }' \
-	-e '}' \
-	-e '/^$$/!{' \
-	-e '  H' \
-	-e '  d' \
-	-e '}' \
-	-e '/^$$/{' \
-	-e '  x' \
-	-e '  s/^\n//' \
-	-e '  /Output written on /{' \
-	-e '    s/.*Output written on \([^(]*\) (\([^)]\{1,\}\)).*/Success!  Wrote \2 to \1/' \
-	-e '    s/[[:digit:]]\{1,\}/$(C_PAGES)&$(C_RESET)/g' \
-	-e '    s/Success!/$(C_SUCCESS)&$(C_RESET)/g' \
-	-e '    s/to \(.*\)$$/to $(C_SUCCESS)\1$(C_RESET)/' \
-	-e '    b end' \
-	-e '  }' \
-	-e '  / *LaTeX Error:.*/{' \
-	-e '    s/.*\( *LaTeX Error:.*\)/$(C_ERROR)\1$(C_RESET)/' \
-	-e '    b end' \
-	-e '  }' \
-	-e '  /.*Warning:.*/{' \
-	-e '    s//$(C_WARNING)&$(C_RESET)/' \
-	-e '    b end' \
-	-e '  }' \
-	-e '  /Underfull.*/{' \
-	-e '    s/.*\(Underfull.*\)/$(C_UNDERFULL)\1$(C_RESET)/' \
-	-e '    b end' \
-	-e '  }' \
-	-e '  /Overfull.*/{' \
-	-e '    s/.*\(Overfull.*\)/$(C_OVERFULL)\1$(C_RESET)/' \
-	-e '    b end' \
-	-e '  }' \
-	$(if $(VERBOSE),,-e '  d') \
-	-e '  :end' \
-	-e '  G' \
-	-e '}' \
-
-# Colorize BibTeX output.
-color_bib	:= \
-	$(SED) \
-	-e 's/^Warning--.*/$(C_WARNING)&$(C_RESET)/' -e 't' \
-	-e '/---/,/^.[^:]/{' \
-	-e '  H' \
-	-e '  /^.[^:]/{' \
-	-e '    x' \
-	-e '    s/\n\(.*\)/$(C_ERROR)\1$(C_RESET)/' \
-	-e '	p' \
-	-e '    s/.*//' \
-	-e '    h' \
-	-e '    d' \
-	-e '  }' \
-	-e '  d' \
-	-e '}' \
-	-e '/(.*error.*)/s//$(C_ERROR)&$(C_RESET)/' \
-	$(if $(VERBOSE),,-e 'd')
-
-
-# Make beamer output big enough to print on a full page.  Landscape doesn't
-# seem to work correctly.
-enlarge_beamer	= $(PSNUP) -l -1 -W128mm -H96mm -pletter
-
-# $(call test-run-again,<source stem>)
-test-run-again	= $(EGREP) -q '^(.*Rerun .*|No file $1\.[^.]+\.)$$' $1.log
-
-# This tests whether the build target commands should be run at all, from
-# viewing the log file.
-# $(call test-log-for-need-to-run,<source stem>)
-define test-log-for-need-to-run
-$(SED) \
--e '/^No file $(call escape-dots,$1)\.aux\./d' \
-$1.log \
-| $(EGREP) -q '^(.*Rerun .*|No file $1\.[^.]+\.|No file .+\.tex\.|LaTeX Warning: File.*)$$'
-endef
-
-# LaTeX invocations
-#
-# $(call latex,<tex file>,[<extra LaTeX args>])
-run-latex	= $(latex_build_program) --interaction=batchmode $(if $2,$2,) $1 > /dev/null
-
-# $(call latex-color-log,<LaTeX stem>)
-latex-color-log	= $(color_tex) $1.log
-
-# $(call run-makeindex,<input>,<output>,<log>,<extra flags>)
-define run-makeindex
-success=1; \
-if ! $(MAKEINDEX) -q $1 -t $3 -o $2 $4 > /dev/null || $(EGREP) -q '^!!' $3; then \
-	$(call colorize-makeindex-errors,$3); \
-	$(RM) -f '$2'; \
-	success=0; \
-fi; \
-[ "$$success" = "1" ] && $(sh_true) || $(sh_false);
-endef
-
-# This runs the given script to generate output, and it uses MAKE_RESTARTS to
-# ensure that it never runs it more than once for a particular root make
-# invocation.
-#
-# $(call run-script,<interpreter>,<input>,<output>)
-define run-script
-[ ! -e '$2.cookie' ] && $(ECHO) "restarts=$(RESTARTS)" > $2.cookie && $(ECHO) "level=$(MAKELEVEL)" >> $2.cookie; \
-restarts=`$(SED) -n -e 's/^restarts=//p' $2.cookie`; \
-level=`$(SED) -n -e 's/^level=//p' $2.cookie`; \
-if $(EXPR) $(MAKELEVEL) '<=' $$level '&' $(RESTARTS) '<=' $$restarts >/dev/null; then \
-	$(call echo-build,$2,$3,$(RESTARTS)-$(MAKELEVEL)); \
-	$1 '$2' '$3'; \
-	$(ECHO) "restarts=$(RESTARTS)" > '$2.cookie'; \
-	$(ECHO) "level=$(MAKELEVEL)" >> '$2.cookie'; \
-fi
-endef
-
-# BibTeX invocations
-#
-# $(call run-bibtex,<tex stem>)
-run-bibtex	= $(BIBTEX) $1 | $(color_bib)
-
-
-# $(call convert-eps-to-pdf,<eps file>,<pdf file>,[gray])
-# Note that we don't use the --filter flag because it has trouble with bounding boxes that way.
-define convert-eps-to-pdf
-$(if $3,$(CAT) '$1' | $(call kill-ps-color) > '$1.cookie',$(CP) '$1' '$1.cookie'); \
-$(EPSTOPDF) '$1.cookie' --outfile='$2' > $1.log; \
-$(call colorize-epstopdf-errors,$1.log);
-endef
-
-# $(call convert-gpi,<gpi file>,<output file>,[gray])
-#
-define convert-gpi
-$(ECHO) 'set terminal $(if $(filter %.pdf,$2),pdf enhanced,postscript enhanced eps)' \
-$(if $(filter %.pdf,$2),fsize ,)$(call get-default,$(strip \
-$(firstword \
-	$(shell \
-		$(SED) \
-			-e 's/^\#\#FONTSIZE=\([[:digit:]]\{1,\}\)/\1/p' \
-			-e 'd' \
-			$1 $(strip $(gpi_global)) \
-	) \
-) \
-),$(if $(filter %.pdf,$2),$(DEFAULT_GPI_PDF_FONTSIZE),$(DEFAULT_GPI_EPS_FONTSIZE))) \
-$(strip $(if $3,monochrome,$(if \
-$(shell $(EGREP) '^\#\#[[:space:]]*GRAY[[:space:]]*$$' $< $(gpi_global)),\
-,color))) > $1head.make; \
-$(ECHO) 'set output "$2"' >> $1head.make; \
-$(if $(gpi_global),$(CAT) $(gpi_global) >> $1head.make;,) \
-fnames='$1head.make $1';\
-$(if $(gpi_sed),\
-	$(SED) -f '$(gpi_sed)' $$fnames > $1.temp.make; \
-	fnames=$1.temp.make;,\
-) \
-success=1; \
-if ! $(GNUPLOT) $$fnames 2>$1.log; then \
-	$(call colorize-gnuplot-errors,$1.log); \
-	success=0; \
-fi; \
-$(if $(gpi_sed),$(call remove-temporary-files,$1.temp.make);,) \
-$(call remove-temporary-files,$1head.make); \
-[ "$$success" = "1" ] && $(sh_true) || $(sh_false);
-endef
-
-# Creation of .eps files from .png files
-#
-# The intermediate step of PNM (using NetPBM) produces much nicer output than
-# ImageMagick's "convert" binary.  I couldn't get the right combination of
-# flags to make it look nice, anyway.
-#
-# To handle gray scale conversion, we pipe things through ppmtopgm in the
-# middle.
-#
-# $(call convert-png,<png file>,<eps file>)
-define convert-png
-$(PNGTOPNM) "$1" \
-	$(if $3,| $(PPMTOPGM),) \
-	| $(PNMTOPS) -noturn \
-	> "$2"
-endef
-
-# Creation of .eps files from .jpg files
-#
-# Thanks to brubakee for this solution.
-#
-# Uses Postscript level 2 to avoid file size bloat
-# $(call convert-jpg,<jpg file>,<eps file>)
-define convert-jpg
-$(CONVERT) $(if $3,-type Grayscale,) '$1' eps2:'$2'
-endef
-
-# Creation of .eps files from .fig files
-# $(call convert-fig,<fig file>,<output file>,[gray])
-convert-fig	= $(FIG2DEV) -L $(if $(filter %.pdf,$2),pdf,eps) $(if $3,-N,) $1 $2
-
-# Creation of .pstex files from .fig files
-# $(call convert-fig-pstex,<fig file>,<pstex file>)
-convert-fig-pstex	= $(FIG2DEV) -L pstex $1 $2 > /dev/null 2>&1
-
-# Creation of .pstex_t files from .fig files
-# $(call convert-fig-pstex-t,<fig file>,<pstex file>,<pstex_t file>)
-convert-fig-pstex-t	= $(FIG2DEV) -L pstex_t -p $3 $1 $2 > /dev/null 2>&1
-
-# Creation of .dot_t files from .dot files
-# #(call convert-dot-tex,<dot file>,<dot_t file>)
-convert-dot-tex		= $(DOT2TEX) '$1' > '$2'
-
-# Converts svg files into .eps files
-#
-# $(call convert-svg,<svg file>,<eps file>,[gray])
-convert-svg	= $(INKSCAPE) --export-eps='$2' '$1'
-
-# Converts xvg files into .eps files
-#
-# $(call convert-xvg,<xvg file>,<eps file>,[gray])
-convert-xvg	= $(XMGRACE) '$1' -printfile - -hardcopy -hdevice $(if $3,-mono,) EPS > '$2'
-
-# Converts .eps.gz files into .eps files
-#
-# $(call convert-epsgz,<eps.gz file>,<eps file>,[gray])
-convert-epsgz	= $(GUNZIP) -c '$1' $(if $3,| $(call kill-ps-color)) > '$2'
-
-# Converts .eps files into .eps files (usually a no-op, but can make grayscale)
-#
-# $(call convert-eps,<in file>,<out file>,[gray])
-convert-eps	= $(if $3,$(call kill-ps-color) $1 > $2)
-
-# The name of the file containing special postscript commands for grayscale
-gray_eps_file	:= gray.eps.make
-
-# Changes sethsbcolor and setrgbcolor calls in postscript to always produce
-# grayscale.  In general, this is accomplished by writing new versions of those
-# functions into the user dictionary space, which is looked up before the
-# global or system dictionaries (userdict is one of the permanent dictionaries
-# in postscript and is not read-only like systemdict).
-#
-# For setrgbcolor, the weighted average of the triple is computed and the
-# triple is replaced with three copies of that average before the original
-# procedure is called: .299R + .587G + .114B
-#
-# For sethsbcolor, the color is first converted to RGB, then to grayscale by
-# the new setrgbcolor operator as described above.  Why is this done?
-# Because simply using the value component will tend to make pure colors
-# white, a very undesirable thing.  Pure blue should not translate to white,
-# but to some level of gray.  Conversion to RGB does the right thing.  It's
-# messy, but it works.
-#
-# From
-# http://en.wikipedia.org/wiki/HSV_color_space#Transformation_from_HSV_to_RGB,
-# HSB = HSV (Value = Brightness), and the formula used to convert to RGB is
-# as follows:
-#
-# Hi = int(floor(6 * H)) mod 6
-# f = 6 * H - Hi
-# p = V(1-S)
-# q = V(1-fS)
-# t = V(1-(1-f)S)
-# if Hi = 0: R G B <-- V t p
-# if Hi = 1: R G B <-- q V p
-# if Hi = 2: R G B <-- p V t
-# if Hi = 3: R G B <-- p q V
-# if Hi = 4: R G B <-- t p V
-# if Hi = 5: R G B <-- V p q
-#
-# The messy stack-based implementation is below
-# $(call create-gray-eps-file,filename)
-define create-gray-eps-file
-$(ECHO) -n -e '\
-/OLDRGB /setrgbcolor load def\n\
-/setrgbcolor {\n\
-    .114 mul exch\n\
-    .587 mul add exch\n\
-    .299 mul add\n\
-    dup dup\n\
-    OLDRGB\n\
-} bind def\n\
-/OLDHSB /sethsbcolor load def\n\
-/sethsbcolor {\n\
-    2 index                     % H V S H\n\
-    6 mul floor cvi 6 mod       % Hi V S H\n\
-    3 index                     % H Hi V S H\n\
-    6 mul                       % 6H Hi V S H\n\
-    1 index                     % Hi 6H Hi V S H\n\
-    sub                         % f Hi V S H\n\
-    2 index 1                   % 1 V f Hi V S H\n\
-    4 index                     % S 1 V f Hi V S H\n\
-    sub mul                     % p f Hi V S H\n\
-    3 index 1                   % 1 V p f Hi V S H\n\
-    6 index                     % S 1 V p f Hi V S H\n\
-    4 index                     % f S 1 V p f Hi V S H\n\
-    mul sub mul                 % q p f Hi V S H\n\
-    4 index 1 1                 % 1 1 V q p f Hi V S H\n\
-    5 index                     % f 1 1 V q p f Hi V S H\n\
-    sub                         % (1-f) 1 V q p f Hi V S H\n\
-    8 index                     % S (1-f) 1 V q p f Hi V S H\n\
-    mul sub mul                 % t q p f Hi V S H\n\
-    4 -1 roll pop               % t q p Hi V S H\n\
-    7 -2 roll pop pop           % t q p Hi V\n\
-    5 -2 roll                   % Hi V t q p\n\
-    dup 0 eq\n\
-    {1 index 3 index 6 index}\n\
-    {\n\
-        dup 1 eq\n\
-        {3 index 2 index 6 index}\n\
-        {\n\
-            dup 2 eq\n\
-            {4 index 2 index 4 index}\n\
-            {\n\
-                dup 3 eq\n\
-                {4 index 4 index 3 index}\n\
-                {\n\
-                    dup 4 eq\n\
-                    {2 index 5 index 3 index}\n\
-                    {\n\
-                        dup 5 eq\n\
-                        {1 index 5 index 5 index}\n\
-                        {0 0 0}\n\
-                        ifelse\n\
-                    }\n\
-                    ifelse\n\
-                }\n\
-                ifelse\n\
-            }\n\
-            ifelse\n\
-        }\n\
-        ifelse\n\
-    }\n\
-    ifelse                      % B G R Hi V t q p\n\
-    setrgbcolor\n\
-    5 {pop} repeat\n\
-} bind def\n'\
-> $1
-endef
-
-# This actually inserts the color-killing code into a postscript file
-# $(call kill-ps-color)
-define kill-ps-color
-$(SED) -e '/%%EndComments/r $(gray_eps_file)'
-endef
-
-# Converts graphviz .dot files into .eps files
-# Grayscale is not directly supported by dot, so we pipe it through fig2dev in
-# that case.
-# $(call convert-dot,<dot file>,<eps file>,<log file>,[gray])
-define convert-dot
-$(DOT) -Tps '$1' 2>'$3' $(if $4,| $(call kill-ps-color)) > $2; \
-$(call colorize-dot-errors,$3)
-endef
-
-# Convert DVI to Postscript
-# $(call make-ps,<dvi file>,<ps file>,<log file>,[<paper size>])
-make-ps		= \
-	$(DVIPS) -o '$2' $(if $(filter-out BEAMER,$4),-t$(firstword $4),) '$1' \
-		$(if $(filter BEAMER,$4),| $(enlarge_beamer)) > $3 2>&1
-
-# Convert Postscript to PDF
-# $(call make-pdf,<ps file>,<pdf file>,<log file>,<embed file>)
-make-pdf	= \
-	$(call ps2pdf,$1,$2,$(filter 1,$(shell $(CAT) '$4'))) > '$3' 2>&1
-
-# Display information about what is being done
-# $(call echo-build,<input file>,<output file>,[<run number>])
-echo-build	= $(ECHO) "$(C_BUILD)= $1 --> $2$(if $3, ($3),) =$(C_RESET)"
-echo-graphic	= $(ECHO) "$(C_GRAPHIC)= $1 --> $2 =$(C_RESET)"
-echo-dep	= $(ECHO) "$(C_DEP)= $1 --> $2 =$(C_RESET)"
-
-# Display a list of something
-# $(call echo-list,<values>)
-echo-list	= for x in $1; do $(ECHO) "$$x"; done
-
-#
-# DEFAULT TARGET
-#
-
-.PHONY: all
-all: $(default_pdf_targets) ;
-
-.PHONY: all-pdf
-all-pdf: $(default_pdf_targets) ;
-
-ifneq "$(strip $(BUILD_STRATEGY))" "pdflatex"
-.PHONY: all-ps
-all-ps: $(default_ps_targets) ;
-
-.PHONY: all-dvi
-all-dvi: $(default_dvi_targets) ;
-endif
-
-#
-# VIEWING TARGET
-#
-.PHONY: show
-show: all
-	$(QUIET)for x in $(default_pdf_targets); do \
-		[ -e "$$x" ] && $(VIEW_PDF) $$x & \
-	done
-
-#
-# INCLUDES
-#
-source_includes	:= $(addsuffix .d,$(source_stems_to_include))
-graphic_includes := $(addsuffix .gpi.d,$(graphic_stems_to_include))
-
-# Include only the dependencies used
-ifneq "" "$(source_includes)"
-include $(source_includes)$(call include-message,$(source_includes))
-endif
-ifneq "" "$(graphic_includes)"
-include $(graphic_includes)$(call include-message,$(graphic_includes))
-endif
-
-#
-# MAIN TARGETS
-#
-
-# Note that we don't just say %: %.pdf here - this can tend to mess up our
-# includes, which detect what kind of file we are asking for.  For example,
-# asking to build foo.pdf is much different than asking to build foo when
-# foo.gpi exists, because we look through all of the goals for *.pdf that
-# matches *.gpi, then use that to determine which include files we need to
-# build.
-#
-# Thus, we invoke make recursively with better arugments instead, restarting
-# all of the appropriate machinery.
-.PHONY: $(default_stems_ss)
-$(default_stems_ss): %: %.pdf ;
-
-# This builds and displays the wanted file.
-.PHONY: $(addsuffix ._show,$(stems_ssg))
-%._show: %.pdf
-	$(QUIET)$(VIEW_PDF) $< &
-
-ifneq "$(strip $(BUILD_STRATEGY))" "pdflatex"
-.SECONDARY: $(all_pdf_targets)
-%.pdf: %.ps %.embed.make
-	$(QUIET)$(call echo-build,$<,$@)
-	$(QUIET)$(call make-pdf,$<,$@.temp,$@.log,$*.embed.make); \
-	if [ x"$$?" = x"0" ]; then \
-	    $(if $(VERBOSE),$(CAT) $@.log,:); \
-	    $(RM) -f '$@'; \
-	    $(MV) '$@.temp' '$@'; \
-	    $(TOUCH) '$@'; \
-	    $(call copy-with-logging,$@,$(BINARY_TARGET_DIR)); \
-	else \
-	    $(CAT) $@.log; \
-	    $(call remove-temporary-files,'$@.temp'); \
-	    $(sh_false); \
-	fi
-
-.SECONDARY: $(all_ps_targets)
-%.ps: %.dvi %.paper.make
-	$(QUIET)$(call echo-build,$<,$@)
-	$(QUIET)$(call make-ps,$<,$@.temp,$@.log,\
-			$(firstword $(shell $(CAT) $*.paper.make))); \
-	if [ x"$$?" = x"0" ]; then \
-	    $(if $(VERBOSE),$(CAT) $@.log,:); \
-	    $(RM) -f '$@'; \
-	    $(MV) '$@.temp' '$@'; \
-	    $(TOUCH) '$@'; \
-	    $(call copy-with-logging,$@,$(BINARY_TARGET_DIR)); \
-	else \
-	    $(CAT) $@.log; \
-	    $(call remove-temporary-files,'$@.temp'); \
-	    $(sh_false); \
-	fi
-endif
-
-# Build the final target (dvi or pdf) file.  This is a very tricky rule because
-# of the way that latex runs multiple times, needs graphics after the first run
-# (or maybe already has them), and relies on bibliographies or indices that may
-# not exist.
-#
-#	Check the log for fatal errors.  If they exist, colorize and bail.
-#
-#	Create the .auxtarget.cookie file.  (Needed for next time if not present)
-#
-#	If any of the following are true, we must rebuild at least one time:
-#
-#	* the .bbl was recently rebuilt
-#
-#		check a cookie, then delete it
-#
-#	* any of several output files was created or changed:
-#
-#		check $*.run.cookie, then delete it
-#
-#	* the .aux file changed in a way that necessitates attention
-#
-#		Note that if the .auxtarget.make file doesn't exist, this means
-#		that we are doing a clean build, so it doesn't figure into the
-#		test for running again.
-#
-#		compare against .auxtarget.make
-#
-#		move if different, remove if not
-#
-#	* the .log file has errors or warnings requiring at least one more run
-#
-#	We use a loop over a single item to simplify the process of breaking
-#	out when we find one of the conditions to be true.
-#
-#	If we do NOT need to run latex here, then we move the $@.1st.make file
-#	over to $@ because the target file has already been built by the first
-#	dependency run and is valid.
-#
-#	If we do, we delete that cookie file and do the normal multiple-runs
-#	routine.
-#
-ifneq "$(strip $(BUILD_STRATEGY))" "pdflatex"
-.SECONDARY: $(all_dvi_targets)
-endif
-%.$(build_target_extension): %.bbl %.aux %.$(build_target_extension).1st.make
-	$(QUIET)\
-	fatal=`$(call colorize-latex-errors,$*.log)`; \
-	if [ x"$$fatal" != x"" ]; then \
-		$(ECHO) "$$fatal"; \
-		exit 1; \
-	fi; \
-	$(call make-auxtarget-file,$*.aux.make,$*.auxtarget.cookie); \
-	run=0; \
-	for i in 1; do \
-		if $(call test-exists,$*.bbl.cookie); then \
-			run=1; \
-			break; \
-		fi; \
-		if $(call test-exists,$*.run.cookie); then \
-			run=1; \
-		    	break; \
-		fi; \
-		if $(call \
-		test-exists-and-different,$*.auxtarget.cookie,$*.auxtarget.make);\
-		then \
-			run=1; \
-			break; \
-		fi; \
-		if $(call test-log-for-need-to-run,$*); then \
-			run=1; \
-			break; \
-		fi; \
-	done; \
-	$(call remove-temporary-files,$*.bbl.cookie $*.run.cookie); \
-	$(MV) $*.auxtarget.cookie $*.auxtarget.make; \
-	if [ x"$$run" = x"1" ]; then \
-		$(call remove-files,$@.1st.make); \
-		for i in 2 3 4 5; do \
-			$(if $(findstring 3.79,$(MAKE_VERSION)),\
-				$(call echo-build,$*.tex,$@,$(RESTARTS)-$$$$i),\
-				$(call echo-build,$*.tex,$@,$(RESTARTS)-$$i)\
-			); \
-			$(call run-latex,$*); \
-			$(CP) '$*.log' '$*.'$(RESTARTS)-$$i'.log'; \
-			$(call test-run-again,$*) || break; \
-		done; \
-	else \
-		$(MV) '$@.1st.make' '$@'; \
-	fi; \
-	$(call copy-with-logging,$@,$(BINARY_TARGET_DIR)); \
-	$(call latex-color-log,$*)
-
-# Build the .bbl file.  When dependencies are included, this will (or will
-# not!) depend on something.bib, which we detect, acting accordingly.  The
-# dependency creation also produces the %.auxbbl.make file.  BibTeX is a bit
-# finicky about what you call the actual files, but we can rest assured that if
-# a .auxbbl.make file exists, then the .aux file does, as well.  The
-# .auxbbl.make file is a cookie indicating whether the .bbl needs to be
-# rewritten.  It only changes if the .aux file changes in ways relevant to .bbl
-# creation.
-#
-# Note that we do NOT touch the .bbl file if there is no need to
-# create/recreate it.  We would like to leave existing files alone if they
-# don't need to be changed, thus possibly avoiding a rebuild trigger.
-%.bbl: %.auxbbl.make
-	$(QUIET)\
-	$(if $(filter %.bib,$^),\
-		$(call echo-build,$(filter %.bib,$?) $*.aux,$@); \
-		$(call run-bibtex,$*); \
-		$(TOUCH) $@.cookie; \
-	) \
-	if $(EGREP) -q 'bibstyle.(apacann|chcagoa|[^}]*annot)' '$*.aux'; then \
-		$(call echo-build,** annotated extra latex **,output ignored,$(RESTARTS)-1); \
-		$(call run-latex,$*); \
-		$(CP) '$*.log' '$*.$(RESTARTS)-annotated.log'; \
-		$(if $(filter %.bib,$^),\
-			$(call echo-build,** annotated extra bibtex ** $(filter %.bib,$?) $*.aux,$@); \
-			$(call run-bibtex,$*); \
-			$(TOUCH) $@.cookie; \
-		) \
-		$(call echo-build,** annotated extra latex **,output ignored,$(RESTARTS)-2); \
-		$(call run-latex,$*); \
-	fi
-
-# Create the index file - note that we do *not* depend on %.tex here, since
-# that unnecessarily restricts the kinds of indices that we can build to those
-# with exactly the same stem as the source file.  Things like splitidx create
-# idx files with other names.
-#
-# Therefore, we add the .tex dependency in the sourcestem.d file in the call to
-# get index file dependencies from the logs.
-%.ind:	%.idx
-	$(QUIET)$(call echo-build,$<,$@)
-	$(QUIET)$(call run-makeindex,$<,$@,$*.ilg)
-
-# Create the glossary file
-%.gls:	%.glo %.tex
-	$(QUIET)$(call echo-build,$<,$@)
-	$(QUIET)$(call run-makeindex,$<,$@,$*.glg,-s nomencl.ist)
-
-# Create the nomenclature file
-%.nls:	%.nlo %.tex
-	$(QUIET)$(call echo-build,$<,$@)
-	$(QUIET)$(call run-makeindex,$<,$@,$*.nlg,-s nomencl.ist)
-
-# SCRIPTED LaTeX TARGETS
-#
-# Keep the generated .tex files around for debugging if needed.
-.SECONDARY: $(all_tex_targets)
-
-%.tex::	%.tex.sh
-	$(QUIET)$(call run-script,$(SHELL),$<,$@)
-
-%.tex::	%.tex.py
-	$(QUIET)$(call run-script,$(PYTHON),$<,$@)
-
-%.tex::	%.tex.pl
-	$(QUIET)$(call run-script,$(PERL),$<,$@)
-
-%.tex::	%.rst $(RST_STYLE_FILE)
-	$(QUIET)\
-	$(call run-script,$(RST2LATEX)\
-		--documentoptions=letterpaper\
-		$(if $(RST_STYLE_FILE),--stylesheet=$(RST_STYLE_FILE),),$<,$@)
-
-#
-# GRAPHICS TARGETS
-#
-.PHONY: all-graphics
-all-graphics:	$(all_graphics_targets);
-
-ifneq "$(strip $(BUILD_STRATEGY))" "pdflatex"
-.PHONY: all-pstex
-all-pstex:	$(all_pstex_targets);
-endif
-
-.PHONY: all-dot2tex
-all-dot2tex:	$(all_dot2tex_targets);
-
-.PHONY: show-graphics
-show-graphics: all-graphics
-	$(VIEW_GRAPHICS) $(all_known_graphics)
-
-$(gray_eps_file):
-	$(QUIET)$(call echo-build,$^,$@)
-	$(QUIET)$(call create-gray-eps-file,$@)
-
-ifeq "$(strip $(BUILD_STRATEGY))" "pdflatex"
-%.pdf: %.eps $(if $(GRAY),$(gray_eps_file))
-	$(QUIET)$(call echo-graphic,$^,$@)
-	$(QUIET)$(call convert-eps-to-pdf,$<,$@,$(GRAY))
-
-ifeq "$(strip $(GNUPLOT_OUTPUT_EXTENSION))" "pdf"
-%.pdf:	%.gpi %.gpi.d $(gpi_sed)
-	$(QUIET)$(call echo-graphic,$^,$@)
-	$(QUIET)$(call convert-gpi,$<,$@,$(GRAY))
-endif
-
-%.pdf:	%.fig
-	$(QUIET)$(call echo-graphic,$^,$@)
-	$(QUIET)$(call convert-fig,$<,$@,$(GRAY))
-
-endif
-
-%.eps:	%.gpi %.gpi.d $(gpi_sed)
-	$(QUIET)$(call echo-graphic,$^,$@)
-	$(QUIET)$(call convert-gpi,$<,$@,$(GRAY))
-
-%.eps: %.fig
-	$(QUIET)$(call echo-graphic,$^,$@)
-	$(QUIET)$(call convert-fig,$<,$@,$(GRAY))
-
-%.eps: %.dot $(if $(GRAY),$(gray_eps_file))
-	$(QUIET)$(call echo-graphic,$^,$@)
-	$(QUIET)$(call convert-dot,$<,$@,$<.log,$(GRAY))
-
-%.eps: %.xvg $(if $(GRAY),$(gray_eps_file))
-	$(QUIET)$(call echo-graphic,$^,$@)
-	$(QUIET)$(call convert-xvg,$<,$@,$(GRAY))
-
-%.eps: %.svg $(if $(GRAY),$(gray_eps_file))
-	$(QUIET)$(call echo-graphic,$^,$@)
-	$(QUIET)$(call convert-svg,$<,$@,$(GRAY))
-
-%.eps: %.jpg $(if $(GRAY),$(gray_eps_file))
-	$(QUIET)$(call echo-graphic,$^,$@)
-	$(QUIET)$(call convert-jpg,$<,$@,$(GRAY))
-
-%.eps: %.png $(if $(GRAY),$(gray_eps_file))
-	$(QUIET)$(call echo-graphic,$^,$@)
-	$(QUIET)$(call convert-png,$<,$@,$(GRAY))
-
-%.eps: %.eps.gz $(if $(GRAY),$(gray_eps_file))
-	$(QUIET)$(call echo-graphic,$^,$@)
-	$(QUIET)$(call convert-epsgz,$<,$@,$(GRAY))
-
-%.pstex: %.fig
-	$(QUIET)$(call echo-graphic,$^,$@)
-	$(QUIET)$(call convert-fig-pstex,$<,$@,$(GRAY))
-
-%.pstex_t: %.fig %.pstex
-	$(QUIET)$(call echo-graphic,$^,$@)
-	$(QUIET)$(call convert-fig-pstex-t,$<,$@,$*.pstex,$(GRAY))
-
-%.dot_t: %.dot
-	$(QUIET)$(call echo-graphic,$^,$@)
-	$(QUIET)$(call convert-dot-tex,$<,$@)
-
-#
-# DEPENDENCY-RELATED TARGETS.
-#
-
-# Generate all of the information needed to get dependencies
-# As a side effect, this creates a .dvi or .pdf file (depending on the build
-# strategy).  We need to be sure to remove it if there are errors.  Errors can
-# take several forms and all of them are found within the log file:
-#	* There was a LaTeX error
-#	* A needed file was not found
-#	* Cross references need adjustment
-#
-# Behavior:
-#	This rule is responsible for generating the following:
-#	%.aux
-#	%.d
-#	%.aux.make
-#	%.(pdf|dvi).1st.make (the .pdf or .dvi output file, moved)
-#
-#	Steps:
-#
-#	Run latex
-#	Move .pdf or .dvi somewhere else (make no judgements about success)
-#	Flatten the .aux file into another file
-#	Add source dependencies
-#	Add graphic dependencies
-#	Add bib dependencies
-#
-#	Create cookies for various suffixes that may represent files that
-#	need to be read by LaTeX in order for it to function properly.
-#
-#	Note that if some of the dependencies are discovered because they turn
-#	up missing in the log file, we really need the .d file to be reloaded.
-#	Adding a sleep command helps with this.  Otherwise make is extremely
-#	nondeterministic, sometimes working, sometimes not.
-#
-#	Usually we can force this by simply removing the generated pdf file and
-#	not creating a .1st.make file..
-#
-%.$(build_target_extension).1st.make %.d %.aux %.aux.make %.fls: %.tex
-	$(QUIET)$(call echo-build,$<,$*.d $*.$(build_target_extension).1st.make,$(RESTARTS)-1)
-	$(QUIET)\
-	$(call run-latex,$<,--recorder) || $(sh_true); \
-	$(CP) '$*.log' '$*.$(RESTARTS)-1.log'; \
-	$(call die-on-dot2tex,$*.log); \
-	$(call die-on-no-aux,$*); \
-	$(call flatten-aux,$*.aux,$*.aux.make); \
-	$(ECHO) "# vim: ft=make" > $*.d; \
-	$(ECHO) ".PHONY: $*._graphics" >> $*.d; \
-	$(call get-inputs,$*.fls,$(addprefix $*.,aux aux.make d $(build_target_extension))) >> $*.d; \
-	$(call get-missing-inputs,$*.log,$(addprefix $*.,aux aux.make d $(build_target_extension))) >> $*.d; \
-	$(ECHO) ".SECONDEXPANSION:" >> $*.d; \
-	$(call get-graphics,$*) >> $*.d; \
-	$(call get-log-index,$*,$(addprefix $*.,d aux aux.make)) >> $*.d; \
-	$(call get-bibs,$*.aux.make,$(addprefix $*.,bbl aux aux.make)) >> $*.d; \
-	$(EGREP) -q "# MISSING" $*.d && $(SLEEP) 1 && $(RM) $*.pdf; \
-	$(call move-if-exists,$*.$(build_target_extension),$*.$(build_target_extension).1st.make); \
-	for s in toc out lot lof lol nav; do \
-		if [ -e "$*.$$s" ]; then \
-			if ! $(DIFF) -q $*.$$s $*.$$s.make >/dev/null 2>&1; then \
-				$(TOUCH) $*.run.cookie; \
-			fi; \
-			$(CP) $*.$$s $*.$$s.make; \
-		fi; \
-	done
-
-# This is a cookie that is updated if the flattened aux file has changed in a
-# way that affects the bibliography generation.
-.SECONDARY: $(addsuffix .auxbbl.make,$(stems_ssg))
-%.auxbbl.make: %.aux.make
-	$(QUIET)\
-	$(call make-auxbbl-file,$<,$@.temp); \
-	$(call replace-if-different-and-remove,$@.temp,$@)
-
-# Build a dependency file for .gpi files.  These often plot data files that
-# also reside in the directory, so if a data file changes, it's nice to know
-# about it.  This also handles loaded .gpi files, whose filename should have
-# _include_. in it.
-%.gpi.d: %.gpi
-	$(QUIET)$(call echo-build,$<,$@)
-	$(QUIET)$(call make-gpi-d,$<,$@)
-
-# Store the paper size for this document -- note that if beamer is used we set
-# it to the special BEAMER paper size.  We only do this, however, if the
-# special comment exists, in which case we enlarge the output with psnup.
-#
-#	The paper size is extracted from a documentclass attribute.
-%.paper.make: %.tex
-	$(QUIET)$(SED) \
-	-e '/\\documentclass/,/}/{' \
-	-e '  s/%.*//' \
-	-e '  H' \
-	-e '  /}/{' \
-	-e '    s/.*//' \
-	-e '    x' \
-	-e '    /\\documentclass/!d' \
-	-e '    s/[\n[:space:]]*//g' \
-	-e '    s/\([,{[]\)\([[:alnum:]]\{1,\}\)paper\([],}]\)/\1%-\2-%\3/g' \
-	-e '    s/\([,{[]\)\(landscape\)\([],}]\)/\1%-\2-%\3/g' \
-	-e '    s/^[^%]*%-//' \
-	-e '    s/-%[^%]*$$//' \
-	-e '    s/-%[^%]%-/ /g' \
-	-e '    p' \
-	-e '  }' \
-	-e '  d' \
-	-e '}' \
-	-e 'd' \
-	$< > $@; \
-	$(EGREP) -q '^[^%]*\\documentclass[^{]*{beamer}' $< && \
-	(\
-		$(EGREP) -q '^%%[[:space:]]*BEAMER[[:space:]]*LARGE$$' $< && \
-		$(ECHO) "BEAMER" > $@ || \
-		: > $@ \
-	) || $(sh_true)
-
-# Store embedding instructions for this document using a special comment
-%.embed.make: %.tex
-	$(QUIET)$(EGREP) '^%%[[:space:]]*NO[[:space:]]*EMBED[[:space:]]*$$' $< \
-		&& $(ECHO) '' > $@ \
-		|| $(ECHO) '1' > $@;
-
-#
-# HELPFUL PHONY TARGETS
-#
-
-.PHONY: _all_programs
-_all_programs:
-	$(QUIET)$(ECHO) "== All External Programs Used =="
-	$(QUIET)$(call output-all-programs)
-
-.PHONY: _check_programs
-_check_programs:
-	$(QUIET)$(ECHO) "== Checking Makefile Dependencies =="; $(ECHO)
-	$(QUIET) \
-	$(ECHO) hi; \
-	allprogs=`\
-	 ($(call output-all-programs)) | \
-	 $(SED) \
-	 -e 's/^[[:space:]]*//' \
-	 -e '/^#/d' \
-	 -e 's/[[:space:]]*#.*//' \
-	 -e '/^=/s/[[:space:]]/_/g' \
-	 -e '/^[[:space:]]*$$/d' \
-	 -e 's/^[^=].*=[[:space:]]*\([^[:space:]]\{1,\}\).*$$/\\1/' \
-	 `; \
-	spaces='                             '; \
-	for p in $${allprogs}; do \
-	case $$p in \
-		=*) $(ECHO); $(ECHO) "$$p";; \
-		*) \
-			$(ECHO) -n "$$p:$$spaces" | $(SED) -e 's/^\(.\{0,20\}\).*$$/\1/'; \
-			loc=`$(WHICH) $$p`; \
-			if [ x"$$?" = x"0" ]; then \
-				$(ECHO) "$(C_SUCCESS)Found:$(C_RESET) $$loc"; \
-			else \
-				$(ECHO) "$(C_FAILURE)Not Found$(C_RESET)"; \
-			fi; \
-			;; \
-	esac; \
-	done
-
-.PHONY: _check_gpi_files
-_check_gpi_files:
-	$(QUIET)$(ECHO) "== Checking all .gpi files for common errors =="; \
-	$(ECHO); \
-	for f in $(files.gpi); do \
-	result=`$(EGREP) '^([^#]*set terminal |set output )' $$f`; \
-	$(ECHO) -n "$$f: "; \
-	if [ x"$$result" = x"" ]; then \
-		$(ECHO) "$(C_SUCCESS)Okay$(C_RESET)"; \
-	else \
-		$(ECHO) "$(C_FAILURE)Warning: Problematic commands:$(C_RESET)";\
-		$(ECHO) "$(C_ERROR)$$result$(C_RESET)"; \
-	fi; \
-	done; \
-	$(ECHO)
-
-.PHONY: _all_stems
-_all_stems:
-	$(QUIET)$(ECHO) "== All Stems =="
-	$(QUIET)$(call echo-list,$(sort $(default_stems_ss)))
-
-.PHONY: _includes
-_includes:
-	$(QUIET)$(ECHO) "== Include Stems =="
-	$(QUIET)$(ECHO) "=== Sources ==="
-	$(QUIET)$(call echo-list,$(sort $(source_includes)))
-	$(QUIET)$(ECHO) "=== Graphics ==="
-	$(QUIET)$(call echo-list,$(sort $(graphic_includes)))
-
-.PHONY: _all_sources
-_all_sources:
-	$(QUIET)$(ECHO) "== All Sources =="
-	$(QUIET)$(call echo-list,$(sort $(all_files.tex)))
-
-.PHONY: _dependency_graph
-_dependency_graph:
-	$(QUIET)$(ECHO) "/* LaTeX Dependency Graph */"
-	$(QUIET)$(call output-dependency-graph)
-
-.PHONY: _show_dependency_graph
-_show_dependency_graph:
-	$(QUIET)$(call output-dependency-graph,$(graph_stem).dot)
-	$(QUIET)$(DOT) -Tps -o $(graph_stem).eps $(graph_stem).dot
-	$(QUIET)$(VIEW_POSTSCRIPT) $(graph_stem).eps
-	$(QUIET)$(call remove-temporary-files,$(graph_stem).*)
-
-.PHONY: _sources
-_sources:
-	$(QUIET)$(ECHO) "== Sources =="
-	$(QUIET)$(call echo-list,$(sort $(files.tex)))
-
-.PHONY: _scripts
-_scripts:
-	$(QUIET)$(ECHO) "== Scripts =="
-	$(QUIET)$(call echo-list,$(sort $(files_scripts)))
-
-.PHONY: _graphic_outputs
-_graphic_outputs:
-	$(QUIET)$(ECHO) "== Graphic Outputs =="
-	$(QUIET)$(call echo-list,$(sort $(all_graphics_targets)))
-
-.PHONY: _env
-_env:
-ifdef .VARIABLES
-	$(QUIET)$(ECHO) "== MAKE VARIABLES =="
-	$(QUIET)$(call echo-list,$(foreach var,$(sort $(.VARIABLES)),'$(var)'))
-endif
-	$(QUIET)$(ECHO) "== ENVIRONMENT =="
-	$(QUIET)$(ENV)
-
-#
-# CLEAN TARGETS
-#
-# clean-generated is somewhat unique - it relies on the .fls file being
-# properly built so that it can determine which of the files was generated, and
-# which was not.  Expect it to silently fail if the .fls file is missing.
-#
-# This is used to, e.g., clean up index files that are generated by the LaTeX.
-.PHONY: clean-generated
-clean-generated:
-	$(QUIET)$(call clean-files,$(foreach e,$(addsuffix .fls,$(all_stems_source)),\
-						$(shell $(call get-generated-names,$e))))
-
-.PHONY: clean-deps
-clean-deps:
-	$(QUIET)$(call clean-files,$(all_d_targets) *.make *.make.temp *.cookie)
-
-.PHONY: clean-tex
-clean-tex: clean-deps
-	$(QUIET)$(call clean-files,$(rm_tex))
-
-.PHONY: clean-graphics
-# TODO: This *always* deletes pstex files, even if they were not generated by
-# anything....  In other words, if you create a pstex and pstex_t pair by hand
-# an drop them in here without the generating fig file, they will be deleted
-# and you won't get them back.  It's a hack put in here because I'm not sure we
-# even want to keep pstex functionality, so my motivation is not terribly high
-# for doing it right.
-clean-graphics:
-	$(QUIET)$(call clean-files,$(all_graphics_targets) $(intermediate_graphics_targets) *.gpi.d *.pstex *.pstex_t *.dot_t)
-
-.PHONY: clean-backups
-clean-backups:
-	$(QUIET)$(call clean-files,$(backup_patterns) *.temp)
-
-.PHONY: clean-auxiliary
-clean-auxiliary:
-	$(QUIET)$(call clean-files,$(graph_stem).*)
-
-.PHONY: clean-nographics
-clean-nographics: clean-tex clean-deps clean-backups clean-auxiliary ;
-
-.PHONY: clean
-clean:	clean-generated clean-tex clean-graphics clean-deps clean-backups clean-auxiliary
-
-#
-# HELP TARGETS
-#
-
-.PHONY: help
-help:
-	$(help_text)
-
-.PHONY: version
-version:
-	$(QUIET)\
-	$(ECHO) "$(fileinfo) Version $(version)"; \
-	$(ECHO) "by $(author)"; \
-
-#
-# HELP TEXT
-#
-
-define help_text
-# $(fileinfo) Version $(version)
-#
-# by $(author)
-#
-# Generates a number of possible output files from a LaTeX document and its
-# various dependencies.  Handles .bib files, \include and \input, and .eps
-# graphics.  All dependencies are handled automatically by running LaTeX over
-# the source.
-#
-# USAGE:
-#
-#    make [GRAY=1] [VERBOSE=1] [SHELL_DEBUG=1] <target(s)>
-#
-# STANDARD OPTIONS:
-#    GRAY:
-#        Setting this variable forces all recompiled graphics to be grayscale.
-#        It is useful when creating a document for printing.  The default is
-#        to allow colors.  Note that it only changes graphics that need to be
-#        rebuilt!  It is usually a good idea to do a 'make clean' first.
-#
-#    VERBOSE:
-#        This turns off all @ prefixes for commands invoked by make.  Thus,
-#        you get to see all of the gory details of what is going on.
-#
-#    SHELL_DEBUG:
-#        This enables the -x option for sh, meaning that everything it does is
-#        echoed to stderr.  This is particularly useful for debugging
-#        what is going on in $$(shell ...) invocations.  One of my favorite
-#        debugging tricks is to do this:
-#
-#        make -d SHELL_DEBUG=1 VERBOSE=1 2>&1 | less
-#
-# STANDARD AUXILIARY FILES:
-#
-#      Makefile.ini
-#
-#          This file can contain variable declarations that override various
-#          aspects of the makefile.  For example, one might specify
-#
-#          neverclean := *.pdf *.ps
-#          onlysources.tex := main.tex
-#          LATEX_COLOR_WARNING := 'bold red uline'
-#
-#          And this would override the neverclean setting to ensure that pdf
-#          and ps files always remain behind, set the makefile to treat all
-#          .tex files that are not "main.tex" as includes (and therefore not
-#          default targets).  It also changes the LaTeX warning output to be
-#          red, bold, and underlined.
-#
-#          There are numerous variables in this file that can be overridden in
-#          this way.  Search for '?=' to find them all.
-#
-#          Also, you can put arbitrary targets into it if, for example, you
-#          want your source built from something else, e.g.:
-#
-#          generated.tex: generating_script.weird_lang depA depB
-#          	./generating_script.weird_lang > $$@
-#
-#          Note that if you are not careful, you can override the default
-#          target (what happens when you type "make" without arguments), so if
-#          you do use Makefile.ini, you probably want to start it with
-#          something like the following line:
-#
-#          default: all
-#
-#          Since the first target in any makefile is automatically the default,
-#          and the makefile already has a sensible "all" target, this will do
-#          what you want.
-#
-#          The Makefile.ini is imported before *anything else* is done, so go
-#          wild with your ideas for changes to this makefile in there.  It
-#          makes it easy to test them before submitting patches.
-#
-# STANDARD ENVIRONMENT VARIABLES:
-#
-#      LATEX_COLOR_WARNING		'$(LATEX_COLOR_WARNING)'
-#      LATEX_COLOR_ERROR		'$(LATEX_COLOR_ERROR)'
-#      LATEX_COLOR_UNDERFULL		'$(LATEX_COLOR_UNDERFULL)'
-#      LATEX_COLOR_OVERFULL		'$(LATEX_COLOR_OVERFULL)'
-#      LATEX_COLOR_PAGES		'$(LATEX_COLOR_PAGES)'
-#      LATEX_COLOR_BUILD		'$(LATEX_COLOR_BUILD)'
-#      LATEX_COLOR_GRAPHIC		'$(LATEX_COLOR_GRAPHIC)'
-#      LATEX_COLOR_DEP			'$(LATEX_COLOR_DEP)'
-#      LATEX_COLOR_SUCCESS		'$(LATEX_COLOR_SUCCESS)'
-#      LATEX_COLOR_FAILURE		'$(LATEX_COLOR_FAILURE)'
-#
-#   These may be redefined in your environment to be any of the following:
-#
-#      black
-#      red
-#      green
-#      yellow
-#      blue
-#      magenta
-#      cyan
-#      white
-#
-#   Bold or underline may be used, as well, either alone or in combination
-#   with colors:
-#
-#      bold
-#      uline
-#
-#   Order is not important.  You may want, for example, to specify:
-#
-#   export LATEX_COLOR_SUCCESS='bold blue uline'
-#
-#   in your .bashrc file.  I don't know why, but you may want to.
-#
-# STANDARD TARGETS:
-#
-#    all:
-#        Make all possible documents in this directory.  The documents are
-#        determined by scanning for .tex and .tex.sh (described in more detail
-#        later) and omitting any file that ends in ._include_.tex or
-#        ._nobuild_.tex.  The output is a set of .pdf files.
-#
-#        If you wish to omit files without naming them with the special
-#        underscore names, set the following near the top of the Makefile,
-#        or (this is recommended) within a Makefile.ini in the same directory:
-#
-#        	includes.tex := file1.tex file2.tex
-#
-#        This will cause the files listed to be considered as include files.
-#
-#        If you have only few source files, you can set
-#
-#        	onlysources.tex := main.tex
-#
-#        This will cause only the source files listed to be considered in
-#        dependency detection.  All other .tex files will be considered as
-#        include files.  Note that these options work for *any* source type,
-#        so you could do something similar with includes.gpi, for example.
-#        Note that this works for *any valid source* target.  All of the
-#        onlysources.* variables are commented out in the shipping version of
-#        this file, so it does the right thing when they simply don't exist.
-#        The comments are purely documentation.  If you know, for example, that
-#        file.mycoolformat is supported by this Makefile, but don't see the
-#        "onlysources.mycoolformat" declared in the comments, that doesn't mean
-#        you can't use it.  Go ahead and set "onlysources.mycoolformat" and it
-#        should do the right thing.
-#
-#    show:
-#        Builds and displays all documents in this directory.  It uses the
-#        environment-overridable value of VIEW_PDF (currently $(VIEW_PDF)) to
-#        do its work.
-#
-#    all-graphics:
-#        Make all of the graphics in this directory.
-#
-#    all-pstex (only for BUILD_STRATEGY=latex):
-#        Build all fig files into pstex and pstex_t files.  Gray DOES NOT WORK.
-#
-#    all-gray-pstex (only for BUILD_STRATEGY=latex):
-#    	 Build all fig files into grayscale pstex and pstex_t files.
-#
-#    all-dot2tex:
-#    	 Build all dot files into tex files.
-#
-#    show-graphics:
-#        Builds and displays all graphics in this directory.  Uses the
-#        environment-overridable value of VIEW_GRAPHICS (currently
-#        $(VIEW_GRAPHICS)) to do its work.
-#
-#    clean:
-#        Remove ALL generated files, leaving only source intact.
-#        This will *always* skip files mentioned in the "neverclean" variable,
-#        either in this file or specified in Makefile.ini:
-#
-#        	neverclean := *.pdf *.ps
-#
-#       The neverclean variable works on all "clean" targets below, as well.
-#
-#    clean-graphics:
-#        Remove all generated graphics files.
-#
-#    clean-backups:
-#        Remove all backup files: $(backup_patterns)
-#        (XFig and other editors have a nasty habit of leaving them around)
-#        Also removes Makefile-generated .temp files
-#
-#    clean-tex:
-#        Remove all files generated from LaTeX invocations except dependency
-#        information.  Leaves graphics alone.
-#
-#    clean-deps:
-#        Removes all auto-generated dependency information.
-#
-#    clean-auxiliary:
-#        Removes extra files created by various targets (like the dependency
-#        graph output).
-#
-#    clean-nographics:
-#        Cleans everything *except* the graphics files.
-#
-#    help:
-#        This help text.
-#
-#    version:
-#        Version information about this LaTeX makefile.
-#
-# DEBUG TARGETS:
-#
-#    _all_programs:
-#        A list of the programs used by this makefile.
-#
-#    _check_programs:
-#        Checks your system for the needed software and reports what it finds.
-#
-#    _check_gpi_files:
-#        Checks the .gpi files in the current directory for common errors, such
-#        as specification of the terminal or output file inside of the gpi file
-#        itself.
-#
-#    _dependency_graph:
-#        Outputs a .dot file to stdout that represents a graph of LaTeX
-#        dependencies.  To see it, use the _show_dependency_graph target or
-#        direct the output to a file, run dot on it, and view the output, e.g.:
-#
-#        make _dependency_graph > graph.dot
-#        dot -T ps -o graph.eps graph.dot
-#        gv graph.eps
-#
-#    _show_dependency_graph:
-#        Makes viewing the graph simple: extracts, builds and displays the
-#        dependency graph given in the _dependency_graph target using the value
-#        of the environment-overridable VIEW_POSTSCRIPT variable (currently set
-#        to $(VIEW_POSTSCRIPT)).  The postscript viewer is used because it
-#        makes it easier to zoom in on the graph, a critical ability for
-#        something so dense and mysterious.
-#
-#    _all_sources:
-#        List all .tex files in this directory.
-#
-#    _sources:
-#        Print out a list of all compilable sources in this directory.  This is
-#        useful for determining what make thinks it will be using as the
-#        primary source for 'make all'.
-#
-#    _scripts:
-#        Print out a list of scripts that make knows can be used to generate
-#        .tex files (described later).
-#
-#    _all_stems:
-#        Print a list of stems.  These represent bare targets that can be
-#        executed.  Listing <stem> as a bare target will produce <stem>.pdf.
-#
-#    _includes:
-#        A list of .d files that would be included in this run if _includes
-#        weren't specified.  This target may be used alone or in conjunction
-#        with other targets.
-#
-#    _graphic_outputs:
-#        A list of all generated .eps files
-#
-#    _env:
-#        A list of environment variables and their values.  If supported by
-#        your version of make, also a list of variables known to make.
-#
-# FILE TARGETS:
-#
-#    %, %.pdf:
-#        Build a PDF file from the corresponding %.tex file.
-#
-#        If BUILD_STRATEGY=pdflatex, then this builds the pdf directly.
-#        Otherwise, it uses this old-school but effective approach:
-#
-#            latex -> dvips -> ps2pdf
-#
-#        The BUILD_STRATEGY can be overridden in Makefile.ini in the same
-#        directory.  The default is pdflatex.
-#
-#        Reasons for using latex -> dvips include the "psfrag" package, and the
-#        generation of postscript instead of PDF.  Arguments for using pdflatex
-#        include "new and shiny" and "better supported."  I can't argue with
-#        either of those, and supporting them both didn't turn out to be that
-#        difficult, so there you have it.  Choices.
-#
-#    %._show:
-#        A phony target that builds the pdf file and then displays it using the
-#        environment-overridable value of VIEW_PDF ($(VIEW_PDF)).
-#
-#    %._graphics:
-#        A phony target that generates all graphics on which %.pdf (or %.dvi)
-#        depends.
-#
-#    %.ps (only for BUILD_STRATEGY=latex):
-#        Build a Postscript file from the corresponding %.tex file.
-#        This is done using dvips.  Paper size is automatically
-#        extracted from the declaration
-#
-#        \documentclass[<something>paper]
-#
-#        or it is the system default.
-#
-#        If using beamer (an excellent presentation class), the paper
-#        size is ignored.  More on this later.
-#
-#    %.dvi (only for BUILD_STRATEGY=latex):
-#        Build the DVI file from the corresponding %.tex file.
-#
-#    %.ind:
-#        Build the index for this %.tex file.
-#
-#    %.gls:
-#        Build the nomenclature glossary for this %.tex file.
-#
-#    %.nls:
-#        Build the (newer) nomenclature file for this %.tex file.
-#
-#    %.eps:
-#        Build an eps file from one of the following file types:
-#
-#       .dot    : graphviz
-#       .gpi    : gnuplot
-#       .fig    : xfig
-#       .xvg    : xmgrace
-#       .svg    : scalable vector graphics (goes through inkscape)
-#       .png    : png (goes through NetPBM)
-#       .jpg	: jpeg (goes through ImageMagick)
-#       .eps.gz : gzipped eps
-#
-#       The behavior of this makefile with each type is described in
-#       its own section below.
-#
-#    %.pstex{,_t} (only for BUILD_STRATEGY=latex):
-#       Build a .pstex_t file from a .fig file.
-#
-# FEATURES:
-#
-#    Optional Binary Directory:
-#        If you create the _out_ directory in the same place as the makefile,
-#        it will automatically be used as a dumping ground for .pdf (or .dvi,
-#        .ps, and .pdf) output files.
-#
-#        Alternatively, you can set the BINARY_TARGET_DIR variable, either as a
-#        make argument or in Makefile.ini, to point to your directory of
-#        choice.  Note that no pathname wildcard expansion is done in the
-#        makefile, so make sure that the path is complete before going in
-#        there.  E.g., if you want to specify something in your home directory,
-#        use $$HOME/ instead of ~/ so that the shell expands it before it gets
-#        to the makefile.
-#
-#    External Program Dependencies:
-#        Every external program used by the makefile is represented by an
-#        ALLCAPS variable at the top of this file.  This should allow you to
-#        make judgments about whether your system supports the use of this
-#        makefile.  The list is available in the ALL_PROGRAMS variable and,
-#        provided that you are using GNU make 3.80 or later (or you haven't
-#        renamed this file to something weird like "mylatexmakefile" and like
-#        invoking it with make -f) can be viewed using
-#
-#        make _all_programs
-#
-#        Additionally, the availability of these programs can be checked
-#        automatically for you by running
-#
-#        make _check_programs
-#
-#        The programs are categorized according to how important they are and
-#        what function they perform to help you decide which ones you really
-#        need.
-#
-#    Colorized Output:
-#        The output of commands is colorized to highlight things that are often
-#        important to developers.  This includes {underfull,overfull}
-#        {h,v}boxes, general LaTeX Errors, each stage of document building, and
-#        the number of pages in the final document.  The colors are obtained
-#        using 'tput', so colorization should work pretty well on any terminal.
-#
-#        The colors can be customized very simply by setting any of the
-#        LATEX_COLOR_<CONTEXT> variables in your environment (see above).
-#
-#    Predecessors to TeX Files:
-#        Given a target <target>, if no <target>.tex file exists but a
-#        corresponding script or predecessor file exists, then appropriate
-#        action will be taken to generate the tex file.
-#
-#        Currently supported script or predecessor languages are:
-#
-#        sh:     %.tex.sh
-#        perl:   %.tex.pl
-#        python: %.tex.py
-#
-#           Calls the script using the appropriate interpreter, assuming that
-#           its output is a .tex file.
-#
-#           The script is called thus:
-#
-#              <interpreter> <script file name> <target tex file>
-#
-#           and therefore sees exactly one parameter: the name of the .tex
-#           file that it is to create.
-#
-#           Why does this feature exist?  I ran into this while working on
-#           my paper dissertation.  I wrote a huge bash script that used a
-#           lot of sed to bring together existing papers in LaTeX.  It
-#           would have been nice had I had something like this to make my
-#           life easier, since as it stands I have to run the script and
-#           then build the document with make.  This feature provides hooks
-#           for complicated stuff that you may want to do, but that I have
-#           not considered.  It should work fine with included dependencies,
-#           too.
-#
-#           Scripts are run every time make is invoked.  Some trickery is
-#           employed to make sure that multiple restarts of make don't cause
-#           them to be run again.
-#
-#        reST: %.rst
-#
-#           Runs the reST to LaTeX converter to generate a .tex file
-#           If it finds a file names _rststyle_._include_.tex, uses it as
-#           the "stylesheet" option to rst2latex.
-#
-#           Note that this does not track sub-dependencies in rst files.  It
-#           assumes that the top-level rst file will change if you want a
-#           rebuild.
-#
-#    Dependencies:
-#
-#        In general, dependencies are extracted directly from LaTeX output on
-#        your document.  This includes
-#
-#        *    Bibliography information
-#        *    \include or \input files (honoring \includeonly, too)
-#        *    Graphics files inserted by the graphicx package
-#
-#        Where possible, all of these are built correctly and automatically.
-#        In the case of graphics files, these are generated from the following
-#        file types:
-#
-#        GraphViz:      .dot
-#        GNUPlot:       .gpi
-#        XFig:          .fig
-#        XMgrace:       .xvg
-#        SVG:           .svg
-#        PNG:           .png
-#        JPEG:          .jpg
-#        GZipped EPS:   .eps.gz
-#
-#        If the file exists as a .eps already, it is merely used (and will not
-#        be deleted by 'clean'!).
-#
-#        LaTeX and BibTeX are invoked correctly and the "Rerun to get
-#        cross-references right" warning is heeded a reasonable number of
-#        times.  In my experience this is enough for even the most troublesome
-#        documents, but it can be easily changed (if LaTeX has to be run after
-#        BibTeX more than three times, it is likely that something is moving
-#        back and forth between pages, and no amount of LaTeXing will fix
-#        that).
-#
-#        \includeonly is honored by this system, so files that are not
-#        specified there will not trigger a rebuild when changed.
-#
-#    Beamer:
-#        A special TeX source comment is recognized by this makefile (only when
-#        BUILD_STRATEGY=latex, since this invokes psnup):
-#
-#        %%[[:space:]]*BEAMER[[:space:]]*LARGE
-#
-#        The presence of this comment forces the output of dvips through psnup
-#        to enlarge beamer slides to take up an entire letter-sized page.  This
-#        is particularly useful when printing transparencies or paper versions
-#        of the slides.  For some reason landscape orientation doesn't appear
-#        to work, though.
-#
-#        If you want to put multiple slides on a page, use this option and then
-#        print using mpage, a2ps, or psnup to consolidate slides.  My personal
-#        favorite is a2ps, but your mileage may vary.
-#
-#        When beamer is the document class, dvips does NOT receive a paper size
-#        command line attribute, since beamer does special things with sizes.
-#
-#    GNUPlot Graphics:
-#        When creating a .gpi file, DO NOT INCLUDE the "set terminal" or "set
-#        output" commands!  The makefile will include terminal information for
-#        you.  Besides being unnecessary and potentially harmful, including the
-#        terminal definition in the .gpi file makes it harder for you, the one
-#        writing the document, to preview your graphics, e.g., with
-#
-#           gnuplot -persist myfile.gpi
-#
-#        so don't do specify a terminal or an output file in your .gpi files.
-#
-#        When building a gpi file into an eps file, there are several features
-#        available to the document designer:
-#
-#        Global Header:
-#            The makefile searches for the files in the variable GNUPLOT_GLOBAL
-#            in order:
-#
-#            ($(GNUPLOT_GLOBAL))
-#
-#            Only the first found is used.  All .gpi files in the directory are
-#            treated as though the contents of GNUPLOT_GLOBAL were directly
-#            included at the top of the file.
-#
-#            NOTE: This includes special comments! (see below)
-#
-#        Font Size:
-#            A special comment in a .gpi file (or a globally included file) of
-#            the form
-#
-#            ## FONTSIZE=<number>
-#
-#            will change the font size of the GPI output.  If font size is
-#            specified in both the global file and the GPI file, the
-#            specification in the individual GPI file is used.
-#
-#        Grayscale Output:
-#            GNUplot files also support a special comment to force them to be
-#            output in grayscale *no matter what*:
-#
-#            ## GRAY
-#
-#            This is not generally advisable, since you can always create a
-#            grayscale document using the forms mentioned above.  But, if your
-#            plot simply must be grayscale even in a document that allows
-#            colors, this is how you do it.
-#
-#    XFig Graphics:
-#            No special handling is done with XFig, except when a global
-#            grayscale method is used, e.g.
-#
-#                make GRAY=1 document
-#
-#            In these cases the .eps files is created using the -N switch to
-#            fig2dev to turn off color output.  (Only works with eps, not pstex
-#            output)
-#
-#    GraphVis Graphics:
-#            Color settings are simply ignored here.  The 'dot' program is used
-#            to transform a .dot file into a .eps file.
-#
-#            If you want, you can use the dot2tex program to convert dot files
-#            to tex graphics.  The default is to just call dot2tex with no
-#            arguments, but you can change the DOT2TEX definition to include
-#            options as needed (in your Makefile.ini).
-#
-#            Note that, as with pstex, the makefile cannot use latex's own
-#            output to discover all missing dot_t (output) files, since anytime
-#            TeX includes TeX, it has to bail when it can't find the include
-#            file.  It can therefore only stop on the first missing file it
-#            discovers, and we can't get a large list of them out easily.
-#
-#            So, the makefile errors out if it's missing an included dot_t
-#            file, then prompts the user to run this command manually:
-#
-#                make all-dot2tex
-#
-#    GZipped EPS Graphics:
-#
-#        A .eps.gz file is sometimes a nice thing to have.  EPS files can get
-#        very large, especially when created from bitmaps (don't do this if you
-#        don't have to).  This makefile will unzip them (not in place) to
-#        create the appropriate EPS file.
-#
-endef
-
-#
-# DEPENDENCY CHART:
-#
-#digraph "g" {
-#    rankdir=TB
-#    size="9,9"
-#    edge [fontsize=12 weight=10]
-#    node [shape=box fontsize=14 style=rounded]
-#
-#    eps [
-#        shape=Mrecord
-#        label="{{<gpi> GNUplot|<epsgz> GZip|<dot> Dot|<fig> XFig}|<eps> eps}"
-#        ]
-#    pstex [label="%.pstex"]
-#    pstex_t [label="%.pstex_t"]
-#    tex_outputs [shape=point]
-#    extra_tex_files [shape=point]
-#    gpi_data [label="<data>"]
-#    gpi_includes [label="_include_.gpi"]
-#    aux [label="%.aux"]
-#    fls [label="%.fls"]
-#    idx [label="%.idx"]
-#    glo [label="%.glo"]
-#    ind [label="%.ind"]
-#    log [label="%.log"]
-#    tex_sh [label="%.tex.sh"]
-#    rst [label="%.rst"]
-#    tex [
-#        shape=record
-#        label="<tex> %.tex|<include> _include_.tex"
-#        ]
-#    include_aux [label="_include_.aux"]
-#    file_bib [label=".bib"]
-#    bbl [label="%.bbl"]
-#    dvi [label="%.dvi"]
-#    ps [label="%.ps"]
-#    pdf [label="%.pdf"]
-#    fig [label=".fig"]
-#    dot [label=".dot"]
-#    gpi [label=".gpi"]
-#    eps_gz [label=".eps.gz"]
-#
-#    gpi_files [shape=point]
-#
-#    rst -> tex:tex [label="reST"]
-#    tex_sh -> tex:tex [label="sh"]
-#    tex_pl -> tex:tex [label="perl"]
-#    tex_py -> tex:tex [label="python"]
-#    tex -> tex_outputs [label="latex"]
-#    tex_outputs -> dvi
-#    tex_outputs -> aux
-#    tex_outputs -> log
-#    tex_outputs -> fls
-#    tex_outputs -> idx
-#    tex_outputs -> include_aux
-#    aux -> bbl [label="bibtex"]
-#    file_bib -> bbl [label="bibtex"]
-#    idx -> ind [label="makeindex"]
-#    glo -> gls [label="makeindex"]
-#    nlo -> nls [label="makeindex"]
-#    gls -> extra_tex_files
-#    nls -> extra_tex_files
-#    ind -> extra_tex_files
-#    bbl -> extra_tex_files
-#    eps -> extra_tex_files
-#    extra_tex_files -> dvi [label="latex"]
-#    gpi_files -> eps:gpi [label="gnuplot"]
-#    gpi -> gpi_files
-#    gpi_data -> gpi_files
-#    gpi_includes -> gpi_files
-#    eps_gz -> eps:epsgz [label="gunzip"]
-#    fig -> eps:fig [label="fig2dev"]
-#    fig -> pstex [label="fig2dev"]
-#    fig -> pstex_t [label="fig2dev"]
-#    pstex -> pstex_t [label="fig2dev"]
-#    dot -> eps:dot [label="dot"]
-#    dvi -> ps [label="dvips"]
-#    include_aux -> bbl [label="bibtex"]
-#    ps -> pdf [label="ps2pdf"]
-#
-#    edge [ color=blue label="" style=dotted weight=1 fontcolor=blue]
-#    fls -> tex:include [label="INPUT: *.tex"]
-#    fls -> file_bib [label="INPUT: *.aux"]
-#    aux -> file_bib [label="\\bibdata{...}"]
-#    include_aux -> file_bib [label="\\bibdata{...}"]
-#    log -> gpi [label="Graphic file"]
-#    log -> fig [label="Graphic file"]
-#    log -> eps_gz [label="Graphic file"]
-#    log -> dot [label="Graphic file"]
-#    log -> idx [label="No file *.ind"]
-#    log -> glo [label="No file *.gls"]
-#    log -> nlo [label="No file *.nls"]
-#    gpi -> gpi_data [label="plot '...'"]
-#    gpi -> gpi_includes [label="load '...'"]
-#    tex:tex -> ps [label="paper"]
-#    tex:tex -> pdf [label="embedding"]
-#}
-
-#
-# DEPENDENCY CHART SCRIPT
-#
-# $(call output_dependency_graph,[<output file>])
-define output-dependency-graph
-	if [ -f '$(this_file)' ]; then \
-	$(SED) \
-		-e '/^[[:space:]]*#[[:space:]]*DEPENDENCY CHART:/,/^$$/!d' \
-		-e '/DEPENDENCY CHART/d' \
-		-e '/^$$/d' \
-		-e 's/^[[:space:]]*#//' \
-		$(this_file) $(if $1,> '$1',); \
-	else \
-		$(ECHO) "Cannot determine the name of this makefile."; \
-	fi
-endef
-# vim: noet sts=0 sw=8 ts=8
--- a/doc/tex/tech-doku.tex	Thu May 06 08:17:35 2010 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,52 +0,0 @@
-%vim: fenc=utf-8
-\documentclass[a4paper, 11pt]{article}
-
-\usepackage[utf8]{inputenc}
-\usepackage[ngerman]{babel}
-\usepackage{fancyhdr}
-\usepackage{graphicx}
-
-\pagestyle{fancy}
-\fancyhead{}
-
-\sloppy
-
-
-\begin{document}
-
-\begin{titlepage}
-\title{GNV - Generischer Viewer\\
-    Technische Dokumentation}
-\author{Sascha L. Teichmann\\
-    Intevation GmbH\\
-    \texttt{sascha.teichmann@intevation.de}}
-\date{\today}
-\maketitle
-\thispagestyle{empty}
-\end{titlepage}
-
-\newpage
-
-\begin{abstract}
-Dieses Dokument beschreibt den architektonischen Aufbau 
-des GNV und den Zugang hin zur Anpassung der Konfiguration 
-und des System selbst.
-\end{abstract}
-
-
-
-\newpage
-
-\setcounter{page}{1}
-
-\tableofcontents
-
-\newpage
-
-\thispagestyle{empty}
-\chapter{Einleitung}
-\label{section:introduction}
-
-
-
-\end{document}

http://dive4elements.wald.intevation.org