Mercurial > dive4elements > river

log

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
less more | rev 7485: (0) -3000 -1000 -960 +960 +1000 tip
age author description
Thu, 31 Oct 2013 18:34:10 +0100 Sascha L. Teichmann Merged
Thu, 31 Oct 2013 18:30:46 +0100 Sascha L. Teichmann WQDay is increasing(?) if it is empty of last is greater than first.
Thu, 31 Oct 2013 18:26:49 +0100 Sascha L. Teichmann Dont assume that wqdays are always of none zero length.
Thu, 31 Oct 2013 18:25:26 +0100 Sascha L. Teichmann Datacage recommendations: Sort outs to to generate consistent cache keys.
Thu, 31 Oct 2013 15:25:31 +0100 Tom Gottfried WST-Parser and doc: reject files with wrong number of columns.
Thu, 31 Oct 2013 13:11:03 +0100 Tom Gottfried WST-Parser: Improve handling of line-endings.
Thu, 31 Oct 2013 11:56:45 +0100 Tom Gottfried Log errors instead of starting WSPLGEN if required arguments are missing.
Thu, 31 Oct 2013 11:44:09 +0100 Felix Wolfsteller issue1657: Adjust DC conf to spawn sounding widths.
Thu, 31 Oct 2013 11:43:32 +0100 Felix Wolfsteller issue1657: Spawn BEDHEIGHT_SOUNDING_WIDTH facet if asked to. Twiggly.
Thu, 31 Oct 2013 11:41:39 +0100 Felix Wolfsteller i18n for sounding with axis and facet.
Wed, 30 Oct 2013 17:35:12 +0100 Sascha L. Teichmann Datacage recommendations caching: Use LFU strategy to rotate parameter recommendations out earlier. This should be a better config in multiuser user setups because the more frequently used terminal state recs will survive longer.
Wed, 30 Oct 2013 16:04:06 +0100 Felix Wolfsteller issue1345: Add flow_velocities folder.
Wed, 30 Oct 2013 16:03:28 +0100 Felix Wolfsteller issue1345: i18n for dc.
Wed, 30 Oct 2013 15:51:33 +0100 Andre Heinecke Dokumention zur Installation erweitert
Wed, 30 Oct 2013 15:26:21 +0100 Sascha L. Teichmann Experimental caching of datacage recommendations. The respective hook is called a lot and running the datacage over and over again when loading data can be expensive. So the generated recommendations are cached for some time.
Wed, 30 Oct 2013 15:02:16 +0100 Felix Wolfsteller issue1512: Fix loading of all former flow vel. calculation via folder.
Wed, 30 Oct 2013 14:53:26 +0100 Felix Wolfsteller issue1512: Show all flowvelocity facet in former calc. flow vel. part of dc.
Wed, 30 Oct 2013 12:24:03 +0100 Felix Wolfsteller issue1571: i18n.
Wed, 30 Oct 2013 12:03:07 +0100 Felix Wolfsteller issue1572: Call longitudinal-section-user-prototype for bedheight-diffs/year.
Wed, 30 Oct 2013 11:59:09 +0100 Sascha L. Teichmann Merged
Wed, 30 Oct 2013 11:58:57 +0100 Sascha L. Teichmann Datacage: Remove tree branches vom datacage tree on client side which do not contain loadable data.
Wed, 30 Oct 2013 11:57:04 +0100 Sascha L. Teichmann Simplified recommendattion monitor code a bit.
Wed, 30 Oct 2013 11:56:13 +0100 Sascha L. Teichmann Code cleanup.
Wed, 30 Oct 2013 11:55:10 +0100 Sascha L. Teichmann Fix for flys/issue1654: Divide through denisity, do not multiply.
Tue, 29 Oct 2013 19:59:59 +0100 Tom Gottfried Schema change: add lookup table for sediment yield kinds to have its values documented.
Tue, 29 Oct 2013 19:46:41 +0100 Sascha L. Teichmann flys/issue1625: Changed default sediment density factor from 1.8 to 1.9 . The value can be changed by adusting conf.xml (/artifact-databae/options/sediment-density-factor/text()).
Tue, 29 Oct 2013 19:17:28 +0100 Tom Gottfried Importer: document where annotations are searched for.
Tue, 29 Oct 2013 18:57:40 +0100 Tom Gottfried run_geo.sh: allow logging as documented.
Tue, 29 Oct 2013 11:32:56 +0100 Felix Wolfsteller issue1397: Fix reference_curve former calculations in dc.
Tue, 29 Oct 2013 11:31:59 +0100 Felix Wolfsteller dc i18n.
Tue, 29 Oct 2013 10:42:12 +0100 Felix Wolfsteller issue1512: Repair loading all of flowvelocitymeasurements by not equipping
Mon, 28 Oct 2013 15:46:26 +0100 Andre Heinecke inor Layout + Wiki
Mon, 28 Oct 2013 14:22:02 +0100 Andre Heinecke Rechtschreibkorrektur (durchgeführt von Bettina)
Mon, 28 Oct 2013 14:15:53 +0100 Andre Heinecke More installation documentation
Mon, 28 Oct 2013 12:14:46 +0100 Felix Wolfsteller issue1345: Sort sediment densities by year.
Mon, 28 Oct 2013 11:52:14 +0100 Felix Wolfsteller meta-data.xml: Simplify query for densities a bit, sort by depth.
Sun, 27 Oct 2013 17:30:38 +0100 Andre Heinecke Start installation documentation for specific client installation
Fri, 25 Oct 2013 17:06:30 +0200 Tom Gottfried Importer doc: fix some outdated or wrong infos.
Fri, 25 Oct 2013 16:57:15 +0200 Tom Gottfried Importer and doc: Warn instead of die if AT- or STA-file is missing for a gauge.
Fri, 25 Oct 2013 14:32:11 +0200 Felix Wolfsteller FacetTypes: Cosmetics.
Fri, 25 Oct 2013 14:31:56 +0200 Felix Wolfsteller Declare certain bedheight-diagrams as charttypes, for manual points.
Fri, 25 Oct 2013 14:29:38 +0200 Felix Wolfsteller meta-data.xml: Include bedheight-diffs per year in minfo-user-dc.
Fri, 25 Oct 2013 14:10:29 +0200 Felix Wolfsteller meta-data.xml: Subsume the different bed-quality dc-nodes.
Fri, 25 Oct 2013 13:53:48 +0200 Felix Wolfsteller i18n for dc added.
Fri, 25 Oct 2013 13:52:47 +0200 Felix Wolfsteller meta-data.xml: Ease i18nability.
Fri, 25 Oct 2013 15:39:59 +0200 Tom Gottfried Geoimporter: be case-insensitive when looking for floodplains.
Fri, 25 Oct 2013 15:02:08 +0200 Tom Gottfried make-opt-package.sh: give path to internal 'repository'.
Fri, 25 Oct 2013 07:25:19 +0200 Felix Wolfsteller meta-data.xml: Remove duplicates and 'special' macros fro special outs from
Fri, 25 Oct 2013 07:24:15 +0200 Felix Wolfsteller meta-data.xml: Remove delta-wt from longitudinal-section-user-prototype .
Fri, 25 Oct 2013 07:16:16 +0200 Felix Wolfsteller Fix Typo in german i18n (e.g. issue1345) .
Wed, 23 Oct 2013 17:45:56 +0200 Felix Wolfsteller Partly revert rev 7419, conservative guess about which "outs" are handcrafted.
Fri, 25 Oct 2013 03:47:04 +0200 Sascha L. Teichmann Experimental patch: Do not run datacage on artifacts that are loaded from datacage. His hopefully minimizes the datacage runs when a lot of data is loaded.
Thu, 24 Oct 2013 23:06:40 +0200 Tom Gottfried Importer doc: fix some layout issues.
Wed, 23 Oct 2013 17:20:55 +0200 Felix Wolfsteller Made SedimentDensityValue Serializable.
Wed, 23 Oct 2013 17:20:30 +0200 Felix Wolfsteller issue1345: Re-enable sediment load total loads, now that factory is fixed.
Wed, 23 Oct 2013 17:19:30 +0200 Felix Wolfsteller Fix total sediment load fetching.
Wed, 23 Oct 2013 17:08:07 +0200 Felix Wolfsteller issue1345: Showing sediment densitie by depth, comment total load.
Wed, 23 Oct 2013 14:53:47 +0200 Tom Gottfried Fix typo.
Wed, 23 Oct 2013 12:43:26 +0200 Andre Heinecke (issue965) Handle the case that diffids are not available
Wed, 23 Oct 2013 12:09:36 +0200 Felix Wolfsteller meta-data.xml: Be less restrictive in showing facets from waterlevels-discharge.
Wed, 23 Oct 2013 12:08:30 +0200 Felix Wolfsteller meta-data.xml: Exclude empty.facet s.
Wed, 23 Oct 2013 12:07:35 +0200 Felix Wolfsteller meta-meta.xml: Also fetch extreme_base curves via dc.
Wed, 23 Oct 2013 12:07:05 +0200 Felix Wolfsteller meta-data.xml: cosmetics.
Wed, 23 Oct 2013 11:41:24 +0200 Felix Wolfsteller Add another axis (height) to longitudinal-diagram-defaults.
Wed, 23 Oct 2013 11:33:31 +0200 Felix Wolfsteller meta-data.xml: Cosmetics.
Wed, 23 Oct 2013 11:22:47 +0200 Felix Wolfsteller meta-data.xml: More usage of collection-group-macro.
Wed, 23 Oct 2013 11:28:25 +0200 Sascha L. Teichmann Datacage: Consequently call macro 'longitudinal-section-user-prototype' in all longitudinal sections of old calculation. Moved asymmeterical stuff to prototype. This may crash!
Wed, 23 Oct 2013 11:04:06 +0200 Felix Wolfsteller meta-data.xml: Create and use collection-group macro.
Wed, 23 Oct 2013 09:59:46 +0200 Tom Gottfried BedHeightSingleParser: fix no-data-line detection.
Wed, 23 Oct 2013 08:20:11 +0200 Sascha L. Teichmann Datacage ref doc: More docs on functions.
Tue, 22 Oct 2013 17:00:47 +0200 Sascha L. Teichmann Datacage ref doc: More docs for functions.
Tue, 22 Oct 2013 16:24:08 +0200 Felix Wolfsteller issue1205: made SedimentDensity serializable.
Tue, 22 Oct 2013 15:51:33 +0200 Felix Wolfsteller meta-data.xml: Switch more longitudinal-section like user-dc content to prototype macro.
Tue, 22 Oct 2013 15:43:13 +0200 Sascha L. Teichmann Datacage: Fixed macro call.
Tue, 22 Oct 2013 15:34:51 +0200 Sascha L. Teichmann Fixed meta-data.xml
Tue, 22 Oct 2013 15:07:24 +0200 Sascha L. Teichmann Datacage ref doc: More doc for functions.
Tue, 22 Oct 2013 12:21:21 +0200 Felix Wolfsteller issue1512: Sort flow-velocity-models by discharge_zone.value.
Tue, 22 Oct 2013 12:15:33 +0200 Felix Wolfsteller issue1473: Show differences project name in dc.
Tue, 22 Oct 2013 11:57:17 +0200 Felix Wolfsteller meta-data.xml: Fix referenced out for discharge_longitudinal_section.
Mon, 21 Oct 2013 19:05:41 +0200 Andre Heinecke (issue965) Add a comment to explain what we do here
Mon, 21 Oct 2013 18:57:30 +0200 Andre Heinecke (issue965) Use new datacage magic to have year filtering for bedheights
Mon, 21 Oct 2013 17:54:34 +0200 Tom Gottfried Importer doc: mention flow direction retrieval from WST.
Mon, 21 Oct 2013 17:43:01 +0200 Sascha L. Teichmann Removed dc:to-date(). Added 'date' type for <dc:convert> instead.
Mon, 21 Oct 2013 12:21:40 +0200 Felix Wolfsteller issue1521: Adhere more to dc 'spec', show discharges of flow velocity models.
Mon, 21 Oct 2013 12:22:40 +0200 Sascha L. Teichmann Datacage reference doc: Explain dc:container-context and dc:properties.
Mon, 21 Oct 2013 11:43:50 +0200 Sascha L. Teichmann Datacage: Added TODOs for new functions in ref document.
Mon, 21 Oct 2013 11:28:14 +0200 Felix Wolfsteller issue1512: Make double entry of Q facet for flowvelocities dissappear.
Fri, 18 Oct 2013 16:41:10 +0200 Felix Wolfsteller Fix typo in german i18n.
Fri, 18 Oct 2013 12:20:55 +0200 Felix Wolfsteller issue1512: improved i18n for flow velocity measurement facets.
Thu, 17 Oct 2013 16:15:14 +0200 Felix Wolfsteller BedHeightProcessor: Finally display heights, not widths.
Thu, 17 Oct 2013 15:36:13 +0200 Felix Wolfsteller BedHeightProcessor: Set axis label.
Thu, 17 Oct 2013 15:36:00 +0200 Felix Wolfsteller BedHeight(Sounding)Processor: Use FacetTypes.
Thu, 17 Oct 2013 15:23:07 +0200 Felix Wolfsteller Removed debris.
Thu, 17 Oct 2013 15:21:57 +0200 Felix Wolfsteller Moved BedHeightEpoch to BedHeightEpochData.
Thu, 17 Oct 2013 15:08:59 +0200 Felix Wolfsteller Renamed artifacts/**/BedHeight(Single) to BedHeight(Single)Data, to resolve
Thu, 17 Oct 2013 11:12:14 +0200 Felix Wolfsteller Stub for new BedHeightProcessor.
Thu, 17 Oct 2013 10:53:34 +0200 Felix Wolfsteller BedHeightSoundingProcessor: Log if data is now handled.
Thu, 17 Oct 2013 10:50:04 +0200 Felix Wolfsteller BedHeightSoundingProcessor: refactored to avoid drifting behavior when using
Thu, 17 Oct 2013 09:40:12 +0200 Felix Wolfsteller meta-data.xml: cleanup longitudinal-section-user-prototype, removing dupes.
Mon, 21 Oct 2013 10:49:39 +0200 Sascha L. Teichmann Removed same package import.
Mon, 21 Oct 2013 10:48:51 +0200 Sascha L. Teichmann Removed obsolete import.
Fri, 18 Oct 2013 18:40:50 +0200 Sascha L. Teichmann Datacage: Add function dc:to-date(number) which converts a epoch base number to a date object.
Fri, 18 Oct 2013 18:36:18 +0200 Sascha L. Teichmann Datacage: Added dc:min-number(list) and dc:max-number(list) to extract the numerical
Fri, 18 Oct 2013 18:15:33 +0200 Sascha L. Teichmann Datacage: Add function dc:find-all(needle, haystack).
Fri, 18 Oct 2013 15:44:01 +0200 Andre Heinecke (issue1474) Fix deepCopy signatures and actually copy the facet index now
Fri, 18 Oct 2013 15:30:44 +0200 Andre Heinecke (issue1071) Handle the case where no MeasurementStation exists
Thu, 17 Oct 2013 18:56:44 +0200 Sascha L. Teichmann More datacage ref doc.
Thu, 17 Oct 2013 18:37:56 +0200 Andre Heinecke (issue1474) Fix copying of SQ* Facets
Thu, 17 Oct 2013 17:47:58 +0200 Tom Gottfried Importer: Avoid 0-lenght Q-ranges in WST-CSV-parsers.
Thu, 17 Oct 2013 15:26:12 +0200 Sascha L. Teichmann Replaced more tabs with spaces + minor cosmetics (removed out commented code from double precision branch).
Thu, 17 Oct 2013 15:13:32 +0200 Sascha L. Teichmann Replaced tabs with 4 spaces.
Thu, 17 Oct 2013 15:05:08 +0200 Tom Gottfried WstParser: Do not add Q-range for trailing Q-line.
Thu, 17 Oct 2013 12:14:10 +0200 Sascha L. Teichmann Removed obsolete imports.
Thu, 17 Oct 2013 12:11:09 +0200 Sascha L. Teichmann Removed obsolete import + whitespace cleanup.
Thu, 17 Oct 2013 08:29:46 +0200 Felix Wolfsteller Add getModelDescription to FlowVelocityModel.
Thu, 17 Oct 2013 07:48:51 +0200 Felix Wolfsteller White space cosmetics, added debug output.
Thu, 17 Oct 2013 07:46:36 +0200 Felix Wolfsteller SedimentYieldArtifact: Accept 'total' load, genreate facet for it.
Thu, 17 Oct 2013 07:45:41 +0200 Felix Wolfsteller FlowVelocityModelArtifact: Slightly improve facet names.
Thu, 17 Oct 2013 07:45:13 +0200 Felix Wolfsteller Cosmetics.
Thu, 17 Oct 2013 07:44:34 +0200 Felix Wolfsteller Cosmetics.
Thu, 17 Oct 2013 07:42:31 +0200 Felix Wolfsteller issue1473: Let vollmer curves appear under 'former calc/waterlevels from fix.'.
Thu, 17 Oct 2013 07:39:42 +0200 Felix Wolfsteller cosmetics.
Wed, 16 Oct 2013 15:25:56 +0200 Felix Wolfsteller Adjusted i18n to match the one in client.
Wed, 16 Oct 2013 18:48:02 +0200 Andre Heinecke Use more failsave pattern for SQ-facets.
Wed, 16 Oct 2013 18:46:43 +0200 Andre Heinecke Configure correct name for SQ-relation C-chart.
Wed, 16 Oct 2013 15:23:04 +0200 Felix Wolfsteller i18n for total load dc.
Wed, 16 Oct 2013 15:22:18 +0200 Felix Wolfsteller Offer total loads in dc.
Wed, 16 Oct 2013 15:21:14 +0200 Felix Wolfsteller Added i18n for upcoming total load via dc.
Wed, 16 Oct 2013 10:42:45 +0200 Felix Wolfsteller Refactoring: Move functionality of BedHeightAccess into BedHeightFacet for now.
Wed, 16 Oct 2013 10:33:09 +0200 Felix Wolfsteller Minor BedHeightAccess refactoring.
Wed, 16 Oct 2013 14:43:27 +0200 Tom Gottfried Remove code that was previously commented out.
Wed, 16 Oct 2013 14:40:19 +0200 Tom Gottfried BedHeightSingleParser: do not omit lines if last column is empty.
Wed, 16 Oct 2013 13:06:30 +0200 Sascha L. Teichmann Jim, he's dead. double-precision
Wed, 16 Oct 2013 13:03:13 +0200 Sascha L. Teichmann Merged double-precision branch.
Wed, 16 Oct 2013 12:57:40 +0200 Sascha L. Teichmann Merge branch default double-precision
Wed, 16 Oct 2013 12:39:33 +0200 Sascha L. Teichmann Reorder generation of static part of describe document for fast XML DOM handling.
Wed, 16 Oct 2013 12:00:29 +0200 Andre Heinecke (issue1353) Document that there are more things to syncing then just the Number
Wed, 16 Oct 2013 11:45:23 +0200 Andre Heinecke (issue1474) Add sqrelation user data and disable filtering for it
Wed, 16 Oct 2013 11:42:53 +0200 Andre Heinecke Add debug output for variables in user context
Tue, 15 Oct 2013 17:01:20 +0200 Andre Heinecke Break sometimes when dumping variables. Still ugly but a bit nicer.
Wed, 16 Oct 2013 10:18:19 +0200 Tom Gottfried Importer doc: fix syntax error. double-precision
Wed, 16 Oct 2013 09:56:15 +0200 Tom Gottfried BedHeightSingleParser: do not log every data line in file. double-precision
Tue, 15 Oct 2013 19:49:25 +0200 Tom Gottfried Do not log trace of WST-Parser parse exception and document it. double-precision
Tue, 15 Oct 2013 19:19:45 +0200 Tom Gottfried WST-Parser: check consistence of station ordering in file. double-precision
Tue, 15 Oct 2013 19:18:44 +0200 Tom Gottfried Comments. double-precision
Tue, 15 Oct 2013 18:41:55 +0200 Tom Gottfried Merged changes from default into double precision branch. double-precision
Tue, 15 Oct 2013 18:31:59 +0200 Sascha L. Teichmann WST Import: Added parse error exception to WST parser.
Tue, 15 Oct 2013 17:39:04 +0200 Felix Wolfsteller typo fix in doc.
Tue, 15 Oct 2013 17:38:50 +0200 Felix Wolfsteller BedHeightsArtifact: Use FacetTypes, eliminate local facet type definition.
Tue, 15 Oct 2013 17:31:44 +0200 Felix Wolfsteller Prepare new facet types for bedheights.
Tue, 15 Oct 2013 16:41:18 +0200 Felix Wolfsteller i18n for old calculations dc.
Tue, 15 Oct 2013 15:32:36 +0200 Tom Gottfried Importer manual: use unique revision identifier. double-precision
Tue, 15 Oct 2013 15:37:54 +0200 Felix Wolfsteller Add aforementioned user-prototype.
Tue, 15 Oct 2013 15:37:24 +0200 Felix Wolfsteller Prototypically add longitudinal-section-user-prototype, with issues.
Tue, 15 Oct 2013 15:25:09 +0200 Tom Gottfried Importer packaging: run pdflatex three times to get references and page numbering right. double-precision
Tue, 15 Oct 2013 15:06:29 +0200 Felix Wolfsteller issue1345: Show bedheight_type in tooltip.
Tue, 15 Oct 2013 15:03:51 +0200 Felix Wolfsteller issue1345: Bring back waterlevel/diffs from fixation into minfo dc element.
Tue, 15 Oct 2013 14:41:39 +0200 Felix Wolfsteller Fix DC group-by statement, there is no 'oid' variable around.
Tue, 15 Oct 2013 07:06:19 +0200 Felix Wolfsteller issue1345: DC: group bed heights of single years by year.
Tue, 15 Oct 2013 14:45:46 +0200 Tom Gottfried Importer: skip historical discharge tables per default as they come via ETL. double-precision
Tue, 15 Oct 2013 10:11:38 +0200 Tom Gottfried Add warning on errors when importing duplicates. double-precision
Mon, 14 Oct 2013 17:41:19 +0200 Felix Wolfsteller issue1345: Fix sediment load facet type, adjust theme name.
Mon, 14 Oct 2013 17:40:31 +0200 Felix Wolfsteller have same translations for sediment loads fractions.
Mon, 14 Oct 2013 16:38:16 +0200 Sascha L. Teichmann Datacage doc ref: Explain dc:group
Mon, 14 Oct 2013 16:06:36 +0200 Sascha L. Teichmann Datacage ref doc: Explain dc:filter.
Mon, 14 Oct 2013 15:55:36 +0200 Sascha L. Teichmann Datacage ref doc: Move dc:if & dc:choose up because they are more important than other elements.
Mon, 14 Oct 2013 15:53:06 +0200 Sascha L. Teichmann Datacage ref doc: Explain dc:for-each
Mon, 14 Oct 2013 15:43:34 +0200 Sascha L. Teichmann Datacage ref doc: Explain dc:virtual-column.
Mon, 14 Oct 2013 15:27:49 +0200 Sascha L. Teichmann Datacage ref doc: Explain dc:macro & Co.
Mon, 14 Oct 2013 14:40:51 +0200 Sascha L. Teichmann Datacage ref doc: Explain dc:variable and dc:convert.
Mon, 14 Oct 2013 13:44:54 +0200 Sascha L. Teichmann Dataage ref doc: Explain dc:context, dc:comment
Mon, 14 Oct 2013 13:08:33 +0200 Sascha L. Teichmann Datacage ref doc: More structure. Explain text interpolation.
Mon, 14 Oct 2013 12:16:33 +0200 Felix Wolfsteller Added sedimentdensity i18n.
Mon, 14 Oct 2013 12:15:34 +0200 Felix Wolfsteller issue1345: Added getDepth() to SedimentDensityFactory.
Mon, 14 Oct 2013 12:14:20 +0200 Felix Wolfsteller issue1345: Change Sediment Density Facet label.
Mon, 14 Oct 2013 11:49:15 +0200 Felix Wolfsteller SedimentDensityProcessor: Fix, use getAllDensities instead of only dens. in year 2006.
Mon, 14 Oct 2013 11:48:38 +0200 Felix Wolfsteller SedimentDensity: Fix getAllDensities and made it public.
Mon, 14 Oct 2013 10:01:33 +0200 Felix Wolfsteller i18n for dc and facet name generation.
Mon, 14 Oct 2013 09:55:41 +0200 Felix Wolfsteller cosmetics.
Mon, 14 Oct 2013 09:53:54 +0200 Felix Wolfsteller issue1345: Adjust name of sediment yield/load facets to include fraction name and times.
Mon, 14 Oct 2013 09:52:17 +0200 Felix Wolfsteller issue1345: Prepare SedimentLoadFactory to deliver fraction name and time ranges.
Mon, 14 Oct 2013 09:51:27 +0200 Felix Wolfsteller cosmetics.
Mon, 14 Oct 2013 07:33:32 +0200 Felix Wolfsteller Comment in meta-data.xml.
Mon, 14 Oct 2013 07:31:32 +0200 Felix Wolfsteller cosmetical description fix.
Sat, 12 Oct 2013 10:26:45 +0200 Sascha L. Teichmann Removed obsolete imports.
Fri, 11 Oct 2013 18:40:33 +0200 Andre Heinecke (issue1529) Be more tolerant in the fitting.
Fri, 11 Oct 2013 17:11:15 +0200 Andre Heinecke (issue1529) Only interpolate within a step limit in WQ diagram
Fri, 11 Oct 2013 15:35:25 +0200 Andre Heinecke Polish SQ Datacage and Facets
Fri, 11 Oct 2013 12:44:25 +0200 Felix Wolfsteller doc fix <3 .
Fri, 11 Oct 2013 12:40:52 +0200 Felix Wolfsteller doc fix.
Fri, 11 Oct 2013 12:38:57 +0200 Felix Wolfsteller Doc typo fix.
Fri, 11 Oct 2013 12:26:00 +0200 Felix Wolfsteller issue1345: include fix for display of epochs stoptime.
Fri, 11 Oct 2013 12:23:27 +0200 Felix Wolfsteller issue1512: conf.xml: configure flowvelocitymodel artifact-factory.
Fri, 11 Oct 2013 12:22:40 +0200 Felix Wolfsteller issue1512: Adde flow-velocity-models dc conf.
Fri, 11 Oct 2013 12:18:38 +0200 Felix Wolfsteller issue1345: Added accidentally ommitted i18n for sedimentload dc.
Fri, 11 Oct 2013 12:15:01 +0200 Felix Wolfsteller issue1512: spawn more facets for FlowVelocityMeasurementArtifact .
Fri, 11 Oct 2013 12:12:52 +0200 Felix Wolfsteller issue1512: Adjusted Q and WOutProcessors to handle data
Fri, 11 Oct 2013 11:44:21 +0200 Felix Wolfsteller More doc fixes.
Fri, 11 Oct 2013 11:42:56 +0200 Felix Wolfsteller Processor: Doc.
Fri, 11 Oct 2013 10:30:26 +0200 Felix Wolfsteller issue1512: Added method to get FlowVelocityModel by id.
Fri, 11 Oct 2013 10:29:37 +0200 Felix Wolfsteller issue1512: Initial commit of FlowVelocityModelArtifact.
Fri, 11 Oct 2013 10:28:07 +0200 Felix Wolfsteller issue1512: FlowVelocityCalculation: Opened prepareData(), added doc.
Fri, 11 Oct 2013 10:26:18 +0200 Felix Wolfsteller issue1512: Added comment, opened constructor as we will reuse this class.
Fri, 11 Oct 2013 10:25:34 +0200 Felix Wolfsteller issue1512: Prepare new facet types for flow velocity model facet, add comment.
Thu, 10 Oct 2013 18:34:04 +0200 Sascha L. Teichmann Fixings overview panel: Send valid encoded JSON filters to server part of the client.
Thu, 10 Oct 2013 11:27:56 +0200 Felix Wolfsteller issue1345: Factored out description creation for loads. Make epochs show end time.
Thu, 10 Oct 2013 11:22:16 +0200 Felix Wolfsteller issue1345: Added macro for the differing epoch-description, extended query.
Thu, 10 Oct 2013 11:19:30 +0200 Felix Wolfsteller issue1345: Minor refactoring, made structure for epoch loads equal year loads.
Thu, 10 Oct 2013 11:10:50 +0200 Felix Wolfsteller issue1345: Show fraction and year for sediment load dc subtree.
Thu, 10 Oct 2013 09:49:01 +0200 Felix Wolfsteller Revert 7273, add undefined macro to meta-data.xml.
Wed, 09 Oct 2013 17:56:39 +0200 Tom Gottfried Remove annotations from reference curve recommendations. There is no km-axis.
Wed, 09 Oct 2013 16:33:56 +0200 Sascha L. Teichmann DC: Remove accidentaly used user-macro from system-content part.
Wed, 09 Oct 2013 16:20:33 +0200 Sascha L. Teichmann Removed calls to undefined macro.
Wed, 09 Oct 2013 16:19:13 +0200 Sascha L. Teichmann Removed duplicate macro.
Wed, 09 Oct 2013 16:17:22 +0200 Sascha L. Teichmann Added check for duplicate macros.
Wed, 09 Oct 2013 13:05:37 +0200 Sascha L. Teichmann Little workaround not to crash uf there is no theme style. TODO: Figure out why the theme style is null at this point.
Wed, 09 Oct 2013 12:46:40 +0200 Tom Gottfried fixed typo.
Wed, 09 Oct 2013 12:15:09 +0200 Sascha L. Teichmann Vollmer curve: Added facet for generating error report.
Wed, 09 Oct 2013 11:20:06 +0200 Felix Wolfsteller meta-data.xml: Add more entries to discharge datacage ('user-part').
Wed, 09 Oct 2013 10:03:00 +0200 Felix Wolfsteller meta-data.xml: Let DC show (yet all) computed discharge curves as former calculations.
Wed, 09 Oct 2013 10:01:00 +0200 Felix Wolfsteller meta-data.xml: Refactored discharge-curve-prototype.
Wed, 09 Oct 2013 09:57:49 +0200 Felix Wolfsteller meta-data.xml: Add a macro to load previous discharge calculations.
Tue, 08 Oct 2013 15:24:33 +0200 Felix Wolfsteller BedHeightsArtifact: Import 'river' data, for use in "New Chart"-settings.
Tue, 08 Oct 2013 15:23:51 +0200 Felix Wolfsteller RangeAccess: Use min/max as from/to in RangeAccess.
Tue, 08 Oct 2013 14:50:58 +0200 Felix Wolfsteller Refactoring: Let RiverAccess.getRiver return an River.
Tue, 08 Oct 2013 12:07:18 +0200 Felix Wolfsteller issue1490: Fix text annotations of latest points.
Tue, 08 Oct 2013 11:49:28 +0200 Felix Wolfsteller issue1490: Translate other points as well, when at gauge.
Tue, 08 Oct 2013 09:26:09 +0200 Felix Wolfsteller issue1490: Translate text annotations position when displaying w/q- curve at gauge.
Tue, 08 Oct 2013 09:00:45 +0200 Felix Wolfsteller Minor code simplification.
Mon, 07 Oct 2013 11:13:40 +0200 Sascha L. Teichmann ETL: Added repair XSLT script to rename value of GEWAESSER attribute 'Untere Havel-Wasserstraße (UHW)' with 'Havel'.
Sun, 06 Oct 2013 15:15:45 +0200 Sascha L. Teichmann First draft of a german reference document for datacage elements and functions written in reStructuredText. Lots of TODOs.
Sat, 05 Oct 2013 17:52:16 +0200 Sascha L. Teichmann Reduce usage of careless 'for (int i = 0; i < x.size(); i++)' pattern.
Sat, 05 Oct 2013 12:49:53 +0200 Sascha L. Teichmann Repaced some tabs by spaces.
Sat, 05 Oct 2013 12:48:44 +0200 Sascha L. Teichmann Replaced some tabs by spaces. Guys, please configure your editors not to insert tabs!
Sat, 05 Oct 2013 12:19:54 +0200 Sascha L. Teichmann Removed trailing whitespace.
Sat, 05 Oct 2013 12:17:23 +0200 Sascha L. Teichmann Removed trailing whitespace.
Sat, 05 Oct 2013 12:16:02 +0200 Sascha L. Teichmann Remove obsolete same package import.
Sat, 05 Oct 2013 12:13:14 +0200 Sascha L. Teichmann Removed trailing whitespace.
Sat, 05 Oct 2013 12:06:25 +0200 Sascha L. Teichmann Remove obsolete import.
Fri, 04 Oct 2013 18:35:05 +0200 Andre Heinecke Check for inverted setting later.
Fri, 04 Oct 2013 18:33:44 +0200 Sascha L. Teichmann Code simplification + moved code out of inner loop.
Fri, 04 Oct 2013 18:21:25 +0200 Andre Heinecke Remove boundToOut facet pass. This is now only done if we filtered before.
Fri, 04 Oct 2013 18:00:29 +0200 Andre Heinecke Fix SQOverview the new generators need the master artifact set.
Fri, 04 Oct 2013 17:56:02 +0200 Andre Heinecke Polish labels and remove unused classes. SQOverview is currently broken.
Fri, 04 Oct 2013 17:02:01 +0200 Andre Heinecke Add new option to diagram axes "logarithmic" that can be set to an evaluator
Fri, 04 Oct 2013 17:00:05 +0200 Andre Heinecke Add SQRelation Processor
Fri, 04 Oct 2013 16:59:30 +0200 Andre Heinecke Configure SQ Relations to use new diagram way
Wed, 02 Oct 2013 18:27:14 +0200 Andre Heinecke Remove SQ Generator Subclasses for A-F
Wed, 02 Oct 2013 18:26:22 +0200 Andre Heinecke Remove obsolete classes
Wed, 02 Oct 2013 17:04:23 +0200 Andre Heinecke (issue1474) Add datacage loading for SQ Relations
Tue, 01 Oct 2013 17:10:55 +0200 Andre Heinecke Silence overly spammy debug output
Fri, 04 Oct 2013 12:16:37 +0200 Felix Wolfsteller Removed TODO which was already done.
Fri, 04 Oct 2013 11:59:26 +0200 Felix Wolfsteller issue1345: call longitudinal-section-prototype macro for flow-veloc. DC. Added todo.
Fri, 04 Oct 2013 11:37:50 +0200 Felix Wolfsteller issue 1345: Let sediment-load dc-config call longitdunal-section-prototype macro.
Fri, 04 Oct 2013 11:11:48 +0200 Felix Wolfsteller issue1345: Also let bed-quality use longitudinal-section-prototype.
Fri, 04 Oct 2013 10:52:07 +0200 Felix Wolfsteller issue1345: adjust dc-conf for befheight-diffs: is now longitudinal-section-prototype.
Fri, 04 Oct 2013 07:49:21 +0200 Felix Wolfsteller issue1345: meta-data.xml: For bedheight_middle, use the longitudinal-section-prototype.
Wed, 02 Oct 2013 23:11:59 +0200 Sascha L. Teichmann Global facet filtering with bound to out: The DiagramAttributes implements the FacetFilter and not the Generators.
Wed, 02 Oct 2013 19:24:43 +0200 Sascha L. Teichmann Use diagram configuration and there processors to define compatible facets in loaded data.
Wed, 02 Oct 2013 18:41:12 +0200 Sascha L. Teichmann Made lookup for generators a class of its own. First step to use it as a compat filter for facets, too.
Wed, 02 Oct 2013 14:14:09 +0200 Felix Wolfsteller meta-meta.xml: remove debugging info content.
Wed, 02 Oct 2013 14:13:19 +0200 Felix Wolfsteller issue1345: add flowvelocity-macro to winfo longitudinal-section.
Wed, 02 Oct 2013 11:44:23 +0200 Felix Wolfsteller issue1435: DC layout for sediment-loads more the way its requested.
Tue, 01 Oct 2013 18:46:30 +0200 Tom Gottfried WST-parser: making ranges tightly fit was broken since a<b was enforced. Re-enabled. double-precision
Tue, 01 Oct 2013 18:32:01 +0200 Tom Gottfried Range importer: Do not allow to set invalid a or b. double-precision
Tue, 01 Oct 2013 10:06:11 +0200 Felix Wolfsteller issue1435: For Sediment Density Facets, use densities name/description.
Tue, 01 Oct 2013 10:03:20 +0200 Felix Wolfsteller issue1435: SedimentDensityFactory: Changed variable name of query to reflect
Tue, 01 Oct 2013 10:01:00 +0200 Felix Wolfsteller issue1435: Add bedheights and morph. width to LS DC conf.
Tue, 01 Oct 2013 09:50:53 +0200 Andre Heinecke (issue1353) Document station check and warn message
Tue, 01 Oct 2013 05:58:47 +0200 Sascha L. Teichmann Bring themes back into sync.
Mon, 30 Sep 2013 17:41:15 +0200 Felix Wolfsteller Doc.
Mon, 30 Sep 2013 17:40:42 +0200 Felix Wolfsteller Initial commit of sediment density processor.
Mon, 30 Sep 2013 17:40:04 +0200 Felix Wolfsteller FlowVelocityGenerator: Simplify code a bit, master and its river is
Mon, 30 Sep 2013 17:38:11 +0200 Felix Wolfsteller SedimentDensityFactory: query densities by id only (not year).
Mon, 30 Sep 2013 17:36:44 +0200 Felix Wolfsteller issue1435: Add sedimentyield and sedimentdensity artifact factories to conf.xml.
Mon, 30 Sep 2013 17:35:43 +0200 Felix Wolfsteller i18n for densities.
Mon, 30 Sep 2013 17:33:29 +0200 Felix Wolfsteller issue1435: Call densities-macro of meta-data.xml thus show densities in datacage.
Mon, 30 Sep 2013 17:32:47 +0200 Felix Wolfsteller issue1435: Add densities-macro to meta-data.xml .
Mon, 30 Sep 2013 17:32:04 +0200 Felix Wolfsteller issue1435: Add SedimentDensityProcessor to longitudinal-diagram-defaults.xml to
Mon, 30 Sep 2013 17:31:10 +0200 Felix Wolfsteller issue1435: SedimentDensityFacet: Access sediment density data.
Mon, 30 Sep 2013 17:30:48 +0200 Felix Wolfsteller Cleaned imports.
Mon, 30 Sep 2013 17:30:31 +0200 Felix Wolfsteller issue1435: Store id of sediment yield only.
Mon, 30 Sep 2013 17:30:06 +0200 Felix Wolfsteller Cleaned imports.
Mon, 30 Sep 2013 17:29:47 +0200 Felix Wolfsteller Cleaned imports, added todo about naming.
Mon, 30 Sep 2013 17:29:26 +0200 Felix Wolfsteller issue1435: Added new sediment.density facet type.
Mon, 30 Sep 2013 17:28:58 +0200 Felix Wolfsteller issue1435: Add methods to get data in StyledSeriesBuilder-friendly format, doc.
Mon, 30 Sep 2013 09:38:09 +0200 Felix Wolfsteller issue1435: Stubs for SedimentDensityFacet and -Artifact.
Mon, 30 Sep 2013 09:08:50 +0200 Felix Wolfsteller issue1435: Prepare SedimentDensityFactory to delive data by sedimentdesity.id and .year.
Mon, 30 Sep 2013 07:40:19 +0200 Felix Wolfsteller Doc fix.
Mon, 30 Sep 2013 06:58:09 +0200 Felix Wolfsteller SedimentYieldArtifact: Removed unneeded documentation, removed but added one TODO.
Fri, 27 Sep 2013 22:09:12 +0200 Felix Wolfsteller issue1435: Remove hardcoded river for dc sediment yield sql query.
Fri, 27 Sep 2013 17:45:18 +0200 Tom Gottfried Remove method which was accidentally merged back from default. double-precision
Fri, 27 Sep 2013 17:36:50 +0200 Tom Gottfried Merged changes from default into double-precision branch. double-precision
Fri, 27 Sep 2013 16:17:03 +0200 Felix Wolfsteller Added accidentally omitted i18n.
Fri, 27 Sep 2013 16:13:54 +0200 Felix Wolfsteller issue1435: In DC conf, show sedimentyields in yield/[year|epoch]- structure, i18n.
Fri, 27 Sep 2013 14:42:03 +0200 Felix Wolfsteller issue1435: meta-data.xml: Add sedimentload/yield- part to minfo part of dc.
Fri, 27 Sep 2013 14:40:39 +0200 Felix Wolfsteller SedimentLoadProcessor: Add debug output when handling an out.
Fri, 27 Sep 2013 14:39:46 +0200 Felix Wolfsteller Doc.
Fri, 27 Sep 2013 14:39:07 +0200 Felix Wolfsteller StaticState: doc.
Fri, 27 Sep 2013 14:37:28 +0200 Felix Wolfsteller issue1435: SedimentYieldArtifact: Add functionality.
Fri, 27 Sep 2013 14:36:05 +0200 Felix Wolfsteller SedimentLoadFactory: Added method to quickly get the description of a given load.
Fri, 27 Sep 2013 14:35:42 +0200 Felix Wolfsteller SedimentLoadFactory: Fix query, added comment about correctness of
Fri, 27 Sep 2013 12:11:54 +0200 Sascha L. Teichmann flys/issue1500: The main wst file determines km_up now.
Thu, 26 Sep 2013 22:03:27 +0200 Felix Wolfsteller Initial commit for untested standalone sediment yield artifact.
Thu, 26 Sep 2013 21:44:53 +0200 Felix Wolfsteller issue1435: Add method to SedimentLoadFactory to fetch a SedimentLoad by id.
Thu, 26 Sep 2013 21:30:19 +0200 Felix Wolfsteller issue1435: Minor refactoring that will come handy to load SedimentLoads
Thu, 26 Sep 2013 19:55:49 +0200 Andre Heinecke Added tag 3.0.16 for changeset 12248d9eb326
Thu, 26 Sep 2013 19:15:17 +0200 Andre Heinecke Only filter the facets for unbound outs 3.0.16
Thu, 26 Sep 2013 19:14:37 +0200 Andre Heinecke Fix wrong usage of a_id and add more datacage stuff to WSPL longitundinal
Thu, 26 Sep 2013 19:13:42 +0200 Andre Heinecke Fix Y-Axis order for default longituidnals
Thu, 26 Sep 2013 19:02:36 +0200 Andre Heinecke Save target_out in the recommendation to ensure it is sent to the server
Thu, 26 Sep 2013 17:31:25 +0200 Tom Gottfried Filter waterleveldifferences according to unit.
Thu, 26 Sep 2013 16:18:55 +0200 Tom Gottfried Filter prefix of descriptions of MINFO-WSTs.
Thu, 26 Sep 2013 16:17:36 +0200 Tom Gottfried Move MINFO-fixation-stuff to MINFO-datacage and give specified names.
Thu, 26 Sep 2013 13:56:54 +0200 Felix Wolfsteller issue1435: Group minfo-stuff in dc, include waterlevels from csv.
Thu, 26 Sep 2013 13:02:02 +0200 Sascha L. Teichmann Removed obsolete imports.
Thu, 26 Sep 2013 12:56:30 +0200 Andre Heinecke Factor out longitudinal section default config and put it in its own file
Thu, 26 Sep 2013 12:22:22 +0200 Andre Heinecke Saveguard range access in case an artifact has no range
Thu, 26 Sep 2013 12:22:01 +0200 Andre Heinecke Add debug output triggered by debugging the last commit
Thu, 26 Sep 2013 12:21:34 +0200 Andre Heinecke TRUE != FALSE ;)
Thu, 26 Sep 2013 12:21:11 +0200 Andre Heinecke Add ShearStress Processor
Thu, 26 Sep 2013 10:39:38 +0200 Andre Heinecke Cosmetics
Thu, 26 Sep 2013 10:39:01 +0200 Andre Heinecke Handle flow velocity discharge in the new part of the QOutProcessor
Thu, 26 Sep 2013 10:38:21 +0200 Andre Heinecke Handle flow velocity measurements in the FlowVelocity processor
Thu, 26 Sep 2013 10:37:24 +0200 Andre Heinecke Handle flow velocity annotation in annoation processor
Thu, 26 Sep 2013 12:56:37 +0200 Sascha L. Teichmann Diagram attributes: Use evaluators for title arguments, too. This makes it more consistent, powerful and a little bit faster.
Thu, 26 Sep 2013 11:41:02 +0200 Sascha L. Teichmann Removed obsolete imports.
Thu, 26 Sep 2013 09:59:23 +0200 Andre Heinecke Use LongitudinalSectionGenerator2 in the LS diagrams.
Thu, 26 Sep 2013 09:58:06 +0200 Andre Heinecke Add startkm and endkm setting to longitudinal section generator 2
Wed, 25 Sep 2013 18:04:49 +0200 Andre Heinecke Add NPE guard to XYStyle.
Wed, 25 Sep 2013 18:04:14 +0200 Andre Heinecke Add FlowVelocity Processor
Wed, 25 Sep 2013 18:03:34 +0200 Andre Heinecke Configure SedimentLoad to use the new diagram Generator
Wed, 25 Sep 2013 17:40:43 +0200 Andre Heinecke Add SedimentLoadProcessor
Thu, 26 Sep 2013 08:38:12 +0200 Felix Wolfsteller Noted insights.
Wed, 25 Sep 2013 16:28:23 +0200 Felix Wolfsteller issue1493: Also transform NaN X values to empty string.
Wed, 25 Sep 2013 16:01:50 +0200 Andre Heinecke Configure BedQuality to use new DiagramGenerator
Wed, 25 Sep 2013 16:01:22 +0200 Andre Heinecke Remove obsolete classes
Wed, 25 Sep 2013 15:57:50 +0200 Andre Heinecke Add BedQuality Processors
Wed, 25 Sep 2013 15:08:48 +0200 Andre Heinecke Configure bed_difference_year in the new way
Wed, 25 Sep 2013 15:08:18 +0200 Andre Heinecke Add label for bed difference axis
Wed, 25 Sep 2013 15:07:41 +0200 Andre Heinecke Add BedWidthProcessor to handle width facets
Wed, 25 Sep 2013 13:09:45 +0200 Andre Heinecke Rename BedWidthProcessor to BedHeightSounding processor.
Wed, 25 Sep 2013 12:36:19 +0200 Sascha L. Teichmann Diagrams: Determine if axis should be inverted dynamically.
Wed, 25 Sep 2013 12:33:22 +0200 Andre Heinecke Configure BedDiffYear diagram and remove old generator
Wed, 25 Sep 2013 12:23:41 +0200 Felix Wolfsteller Doc.
Wed, 25 Sep 2013 12:22:46 +0200 Felix Wolfsteller issue971: Include encoding parameter hardwiredly in csv export panels
Wed, 25 Sep 2013 12:21:45 +0200 Felix Wolfsteller issue971: Let ExportServiceImpl handle encoding parameter,
Wed, 25 Sep 2013 12:20:49 +0200 Felix Wolfsteller issue971: For diagram csv export request windows-1252 encoded output.
Wed, 25 Sep 2013 12:20:01 +0200 Felix Wolfsteller issue971: Prepare client to include encoding in download url.
Wed, 25 Sep 2013 11:48:54 +0200 Felix Wolfsteller issue971: Let ChartOutputServiceImpl interprete an "encoding" parameter.
Wed, 25 Sep 2013 11:48:10 +0200 Felix Wolfsteller Doc.
Mon, 23 Sep 2013 11:40:11 +0200 Felix Wolfsteller Full stop at doc sentence end.
Wed, 25 Sep 2013 11:57:38 +0200 Andre Heinecke Fix diagram title
Wed, 25 Sep 2013 11:57:08 +0200 Andre Heinecke Remove obsolete MiddleBedHeightGenerator classes
Wed, 25 Sep 2013 11:53:45 +0200 Andre Heinecke Configure MiddleBedHeight diagram
Wed, 25 Sep 2013 11:52:05 +0200 Andre Heinecke Remove wrong docstring
Wed, 25 Sep 2013 11:51:47 +0200 Andre Heinecke Also handle bed height annotations
Wed, 25 Sep 2013 11:51:22 +0200 Andre Heinecke Rename BedheightProcessor to BedWidthProcessor
Wed, 25 Sep 2013 11:47:45 +0200 Andre Heinecke Add axis label to bedheight processor.
Wed, 25 Sep 2013 10:25:10 +0200 Andre Heinecke Add MiddleBedHeightProcessor
Wed, 25 Sep 2013 10:01:38 +0200 Andre Heinecke Add dW handling also to the other new longitudinal section diagrams
Tue, 24 Sep 2013 18:37:41 +0200 Andre Heinecke Configure Longitudinal section diagram to use the new way.
Tue, 24 Sep 2013 18:36:43 +0200 Andre Heinecke Add currentKM context / request mapping to RiverUtils and use it in DiagramGenerator
Tue, 24 Sep 2013 18:35:21 +0200 Andre Heinecke Handle multiple processors for axis labeling.
Tue, 24 Sep 2013 18:33:30 +0200 Andre Heinecke Cosmetics
Tue, 24 Sep 2013 18:32:55 +0200 Andre Heinecke Add DeltaWProcessor to process data for a delta W axis.
Tue, 24 Sep 2013 18:13:51 +0200 Andre Heinecke Fix area label rendering.
Tue, 24 Sep 2013 16:23:18 +0200 Sascha L. Teichmann Removed obsolete imports. Minor code cosmetics.
Tue, 24 Sep 2013 12:32:08 +0200 Andre Heinecke Close generator-refactoring generator-refactoring
Tue, 24 Sep 2013 12:29:44 +0200 Andre Heinecke Merge branch generator-refectoring into default.
Tue, 24 Sep 2013 12:25:36 +0200 Andre Heinecke Migrate w_differences and remove unused classes generator-refactoring
Tue, 24 Sep 2013 11:43:21 +0200 Andre Heinecke Actually commit the canHandle part of the last revision. (WQCKms in WOut proc.) generator-refactoring
Tue, 24 Sep 2013 11:42:04 +0200 Andre Heinecke Process corrected WQkms (WQCKms) also in the WOutProcessor generator-refactoring
Tue, 24 Sep 2013 11:40:43 +0200 Andre Heinecke Fix applying the inversion of diagrams. generator-refactoring
Tue, 24 Sep 2013 11:38:07 +0200 Andre Heinecke Migrate discharge_longitudinal_section generator to the new architecture. generator-refactoring
Tue, 24 Sep 2013 11:30:06 +0200 Andre Heinecke Reactivate CALCULATION_DISCHARGE_LONGITUDINAL_CURVE generator-refactoring
Tue, 24 Sep 2013 11:29:18 +0200 Andre Heinecke Also handle subtypes of Discharge longitundial Q facets. generator-refactoring
Tue, 24 Sep 2013 11:28:29 +0200 Andre Heinecke Default to the label of longitundial Q axis in the QProcessor generator-refactoring
Tue, 24 Sep 2013 11:27:28 +0200 Andre Heinecke Handle axis include zero setting for the new processing architecture generator-refactoring
Tue, 24 Sep 2013 11:26:45 +0200 Andre Heinecke Minor cleanup / doc generator-refactoring
Mon, 23 Sep 2013 16:41:12 +0200 Andre Heinecke Add refactored LongitudinalSectionGenerator2 that inherits DiagramGenerator generator-refactoring
Mon, 23 Sep 2013 16:00:02 +0200 Andre Heinecke Add more Inversion logic to the DiagramGenerator generator-refactoring
Mon, 23 Sep 2013 15:55:09 +0200 Andre Heinecke Add AxisLabel handling to WDiffProcessor generator-refactoring
Mon, 23 Sep 2013 15:46:05 +0200 Andre Heinecke Add WDiffProcessor generator-refactoring
Mon, 23 Sep 2013 15:30:46 +0200 Andre Heinecke Add AreaProcessor generator-refactoring
Mon, 23 Sep 2013 16:08:04 +0200 Sascha L. Teichmann Added diagram attributes as converter to longitudinal section diagrams. generator-refactoring
Mon, 23 Sep 2013 12:28:22 +0200 Sascha L. Teichmann Use pre-converted diagram attributes now. generator-refactoring
Mon, 23 Sep 2013 12:21:59 +0200 Andre Heinecke Fix domain axis label and add manualpoints processor to config generator-refactoring
Mon, 23 Sep 2013 12:21:08 +0200 Andre Heinecke Move manual point handling into a Processor generator-refactoring
Mon, 23 Sep 2013 12:20:27 +0200 Andre Heinecke Add useful debug output for diagram generator debugging generator-refactoring
Mon, 23 Sep 2013 11:37:13 +0200 Felix Wolfsteller issue1493: Don't let NaNs slip through csv export.
Mon, 23 Sep 2013 11:24:17 +0200 Felix Wolfsteller Minor refactoring for 1493.
Mon, 23 Sep 2013 10:24:47 +0200 Andre Heinecke Add DiagramGenerator doOut function generator-refactoring
Mon, 23 Sep 2013 10:23:21 +0200 Andre Heinecke Add DiagramGenerator doOut function generator-refactoring
Mon, 23 Sep 2013 10:22:52 +0200 Andre Heinecke Simplify code to prepare DiagramGenerator signature generator-refactoring
Mon, 23 Sep 2013 10:21:59 +0200 Andre Heinecke Add more proessors to longitudinal diagram generator-refactoring
Mon, 23 Sep 2013 09:25:04 +0200 Andre Heinecke Remove accidental commited debug line generator-refactoring
Sun, 22 Sep 2013 21:29:35 +0200 Sascha L. Teichmann Removed obsolete imports. generator-refactoring
Sun, 22 Sep 2013 21:05:12 +0200 Sascha L. Teichmann Use Object instead of DOM Element as argument for setup of out generators. First step to remove dependency to XML DOM when using configuration. generator-refactoring
Sun, 22 Sep 2013 17:15:15 +0200 Sascha L. Teichmann Little workaround to make diagram attribute parsing more thread safe. This is not the right solution. generator-refactoring
Sun, 22 Sep 2013 17:07:17 +0200 Sascha L. Teichmann Moved generators to separate xml file. generator-refactoring
Fri, 20 Sep 2013 19:18:04 +0200 Andre Heinecke Implement Label handling generator-refactoring
Fri, 20 Sep 2013 19:17:49 +0200 Andre Heinecke Add info generator for refactored generators generator-refactoring
Fri, 20 Sep 2013 17:58:30 +0200 Andre Heinecke Remove generator2 hacks generator-refactoring
Fri, 20 Sep 2013 17:36:11 +0200 Andre Heinecke Simplyfy / unify "invert axis" logic generator-refactoring
Fri, 20 Sep 2013 17:04:37 +0200 Sascha L. Teichmann Removed faked ChartInfoGenerator2 and LS Info generator. generator-refactoring
Fri, 20 Sep 2013 17:00:59 +0200 Sascha L. Teichmann ChartGenerator2 can be used as ChartInfoGenerator, too. generator-refactoring
Fri, 20 Sep 2013 16:34:37 +0200 Sascha L. Teichmann Merged generator-refactoring
Fri, 20 Sep 2013 16:34:09 +0200 Sascha L. Teichmann Extended init() of OutGenerator to take name of the out to serve. generator-refactoring
Fri, 20 Sep 2013 16:33:22 +0200 Andre Heinecke Add LTR inversion code to diagram generator. generator-refactoring
Fri, 20 Sep 2013 16:25:43 +0200 Andre Heinecke More Processor refactoring generator-refactoring
Fri, 20 Sep 2013 15:44:39 +0200 Sascha L. Teichmann Trim "names" and "class" attribute of out generators before using. generator-refactoring
Fri, 20 Sep 2013 15:42:21 +0200 Sascha L. Teichmann Allow comma separated names in "names" attribute in out generators to allow registering for more than one name. Old "name" attribute is removed. generator-refactoring
Fri, 20 Sep 2013 15:29:02 +0200 Sascha L. Teichmann Read out generator class info from "class" attribute instead of tags text body. generator-refactoring
Fri, 20 Sep 2013 14:59:00 +0200 Andre Heinecke Use DiagramGenerator for longitudinal section. generator-refactoring
Fri, 20 Sep 2013 14:57:26 +0200 Andre Heinecke Add NPE guard generator-refactoring
Fri, 20 Sep 2013 14:56:46 +0200 Andre Heinecke Add InfoGenerator Hacks to be removed soon. generator-refactoring
Fri, 20 Sep 2013 14:55:44 +0200 Andre Heinecke Remove Axis Walker, unabstract Diagram generator generator-refactoring
Fri, 20 Sep 2013 14:54:26 +0200 Andre Heinecke Add second doOut implementations to work with diagram generator generator-refactoring
Fri, 20 Sep 2013 14:22:44 +0200 Felix Wolfsteller issue1494: Spawn Q facet only if Q data is there.
Thu, 19 Sep 2013 12:53:11 +0200 Felix Wolfsteller Simplify code a bit.
Thu, 19 Sep 2013 12:52:06 +0200 Felix Wolfsteller Doc, comment.
Fri, 20 Sep 2013 13:11:22 +0200 Tom Gottfried Close branch longitudinal-symmetry. Diagram refactoring is now done in branch generator-refactoring. longitudinal-symmetry
Fri, 20 Sep 2013 12:35:14 +0200 Sascha L. Teichmann Added 'include-zero' attribute to <axis> tag in diagram configuration. generator-refactoring
Fri, 20 Sep 2013 12:28:15 +0200 Sascha L. Teichmann Added domain axis title to diagram attributes. generator-refactoring
Fri, 20 Sep 2013 12:04:14 +0200 Andre Heinecke Some more accessors and typo fix generator-refactoring
Fri, 20 Sep 2013 10:30:03 +0200 Andre Heinecke Remove AxisProcessor "glue" class and extend Processor interface generator-refactoring
Fri, 20 Sep 2013 10:29:14 +0200 Andre Heinecke Fix indention / line length generator-refactoring
Fri, 20 Sep 2013 09:55:17 +0200 Andre Heinecke Add Default Processor implementation and make processors inherit it. generator-refactoring
Thu, 19 Sep 2013 17:08:02 +0200 Tom Gottfried Remove obsolete configuration of DGM-SRID.
Thu, 19 Sep 2013 16:27:33 +0200 Sascha L. Teichmann DGM SRIds are now fetched from database instead of configuration.
Thu, 19 Sep 2013 12:51:30 +0200 Felix Wolfsteller issue1436: Repair sedimentload epoch calculation,
Thu, 19 Sep 2013 10:39:15 +0200 Felix Wolfsteller Corrected debug output.
Thu, 19 Sep 2013 11:50:36 +0200 Sascha L. Teichmann Call processors from configuration. generator-refactoring
Thu, 19 Sep 2013 11:39:00 +0200 Sascha L. Teichmann Parse config when setup a new diagram. generator-refactoring
Thu, 19 Sep 2013 11:29:35 +0200 Andre Heinecke Add annotationProcessor generator-refactoring
Thu, 19 Sep 2013 11:08:43 +0200 Sascha L. Teichmann Added alignment rules for diagrams. generator-refactoring
Thu, 19 Sep 2013 10:57:47 +0200 Sascha L. Teichmann Simple interpolation logic for diagram titles and subtitles. generator-refactoring
Thu, 19 Sep 2013 09:16:52 +0200 Felix Wolfsteller issue1493: Use other numberformat for csv data from diagram.
Wed, 18 Sep 2013 18:40:52 +0200 Felix Wolfsteller issue971: Bring a formatter in (a bad) place.
Wed, 18 Sep 2013 14:15:14 +0200 Felix Wolfsteller issue971: Use ";" as CSV separator also in ChartExportHelper, with the
Wed, 18 Sep 2013 17:13:17 +0200 Andre Heinecke Add DiagramGenerator which should mainly replace xygenerator generator-refactoring
Wed, 18 Sep 2013 17:12:13 +0200 Andre Heinecke Factor out annotation handling code generator-refactoring
Wed, 18 Sep 2013 16:26:12 +0200 Sascha L. Teichmann Fixed typo. generator-refactoring
Wed, 18 Sep 2013 16:21:07 +0200 Andre Heinecke Correct group for jfreechart generator-refactoring
Wed, 18 Sep 2013 16:20:59 +0200 Sascha L. Teichmann Added first version of diagram attribute parser. generator-refactoring
Wed, 18 Sep 2013 16:05:56 +0200 Andre Heinecke Update jfreechart dependency to 1.0.15 generator-refactoring
Wed, 18 Sep 2013 15:44:49 +0200 Andre Heinecke Use combine instead of combineignoringNaN (for compatibility) generator-refactoring
Wed, 18 Sep 2013 15:04:26 +0200 Sascha L. Teichmann Add setup(Element config) method to Generator interface to be initialized from configuration. generator-refactoring
Wed, 18 Sep 2013 12:25:05 +0200 Felix Wolfsteller issue971: Change CSV column separator to ";".
Wed, 18 Sep 2013 12:24:33 +0200 Felix Wolfsteller issue971: Change CSV column separator to ";" for Exports, client-side change follows.
Wed, 18 Sep 2013 10:12:47 +0200 Andre Heinecke Combine AxisDataset implementations and remove / simplify handling code. generator-refactoring
Tue, 17 Sep 2013 16:49:37 +0200 Andre Heinecke Add a copy of the ChartGenerator class. generator-refactoring
Tue, 17 Sep 2013 15:34:28 +0200 Andre Heinecke (issue1023) We do not support html getfeatureinfo
Tue, 17 Sep 2013 11:45:44 +0200 Felix Wolfsteller Doc.
Tue, 17 Sep 2013 09:43:27 +0200 Felix Wolfsteller WDifferencesState: Remove empty constructor.
Tue, 17 Sep 2013 09:31:33 +0200 Felix Wolfsteller issue1470: Make validate of WDifferencesState return true if in "new chart".
Mon, 16 Sep 2013 17:30:14 +0200 Felix Wolfsteller Doc.
Mon, 16 Sep 2013 17:29:16 +0200 Felix Wolfsteller Doc.
Mon, 16 Sep 2013 17:28:34 +0200 Felix Wolfsteller Cosmetics, typo fix in comment.
Mon, 16 Sep 2013 17:26:16 +0200 Felix Wolfsteller Cosmetics.
Mon, 16 Sep 2013 17:11:16 +0200 Andre Heinecke Added tag 3.0.15 for changeset a18a43764793
Mon, 16 Sep 2013 16:18:01 +0200 Felix Wolfsteller issue1235: Do not add 'other' values twice to suspended sed. values, fix range. 3.0.15
Mon, 16 Sep 2013 15:11:02 +0200 Felix Wolfsteller Doc.
Mon, 16 Sep 2013 15:45:51 +0200 Andre Heinecke Fix syntax error on oracle by removing unused paramater
Mon, 16 Sep 2013 15:30:06 +0200 Andre Heinecke (issue1071) Change format for paramter a again
Mon, 16 Sep 2013 12:51:22 +0200 Andre Heinecke (Issue 1353): Add warning when a gauge is skipped because of station
Mon, 16 Sep 2013 09:52:28 +0200 Felix Wolfsteller issue1465: Assume that a "0" measurement for total sediment load is
Mon, 16 Sep 2013 09:17:33 +0200 Felix Wolfsteller issue1157: Fix sorting by start time (descending) for cross-section selection.
Fri, 13 Sep 2013 18:29:01 +0200 Tom Gottfried Schema change: increase precision of gauges.station to be able to hold nearby gauges. double-precision
Fri, 13 Sep 2013 17:42:09 +0200 Sascha L. Teichmann Fixed misuse of x !=/== Double.NaN
Fri, 13 Sep 2013 16:10:10 +0200 Felix Wolfsteller issue1465: Adjust to new use of NaN instead of 0.
Fri, 13 Sep 2013 16:07:46 +0200 Felix Wolfsteller issue1465: Do not allow null ranges for fraction values, logger.error instead.
Fri, 13 Sep 2013 16:03:05 +0200 Felix Wolfsteller issue1465: Initialize sediment load fraction values with NaN instead of 0,
Fri, 13 Sep 2013 16:01:11 +0200 Felix Wolfsteller issue1465: Show space instead of '-' in table results view.
Fri, 13 Sep 2013 15:30:17 +0200 Sascha L. Teichmann Typo fix.
Fri, 13 Sep 2013 15:24:07 +0200 Sascha L. Teichmann Another tweak for flys/issue1353: Be more tolerant about river names.
Fri, 13 Sep 2013 12:28:13 +0200 Tom Gottfried make_release.sh: default DGM_PATH to path on poland.
Fri, 13 Sep 2013 12:30:42 +0200 Felix Wolfsteller issue1465: Prepare SedimentLoadExporter to show "-" for NaN-values.
Fri, 13 Sep 2013 12:02:40 +0200 Sascha L. Teichmann Fix for flys/issue1479: Really iterate over the FLYS river not over empty list.
Thu, 12 Sep 2013 21:12:59 +0200 Tom Gottfried SCHEMA CHANGE: a < b now enforced on ranges. double-precision
Thu, 12 Sep 2013 19:15:07 +0200 Tom Gottfried DGM-importer: enforce a < b for ranges. double-precision
Thu, 12 Sep 2013 18:58:19 +0200 Tom Gottfried Range import: enforce a<b not only for WSTs and set only a for zero-length ranges. double-precision
Thu, 12 Sep 2013 18:43:21 +0200 Tom Gottfried Issue1333: expand single-line i.e. 0-lenght Q-range to minimal length. double-precision
Fri, 30 Aug 2013 17:31:20 +0200 Tom Gottfried Minor schema change: allow to delete ranges with associated DEMs. double-precision
Thu, 12 Sep 2013 18:04:48 +0200 Sascha L. Teichmann Fix for flys/issue1018: Sort the pairs of (q, w) in q before creating a spline also in case of non interpolation.
Thu, 12 Sep 2013 16:35:07 +0200 Sascha L. Teichmann Fix for flys/issue1479: The indices of the dates of the analysis periods where re-mapped wrong.
Thu, 12 Sep 2013 11:50:39 +0200 Felix Wolfsteller issue1472: Remove commented code.
Thu, 12 Sep 2013 11:33:26 +0200 Felix Wolfsteller issue1472: Do not guess flow direction from differences.
Thu, 12 Sep 2013 10:15:18 +0200 Tom Gottfried LocationDistancePanel error messages: do not imply calculation in the direction of kilometrage.
Thu, 12 Sep 2013 10:13:09 +0200 Tom Gottfried merged accidental head (nothing changed)
Thu, 12 Sep 2013 09:46:35 +0200 Felix Wolfsteller issue1378: Adjust style for flood-protection annotation values at y axis.
Wed, 11 Sep 2013 17:04:06 +0200 Bernhard Reiter Closing branch 'dc-km-filter', should already be integrated in default (but not tracked by hg). dc-km-filter
Wed, 11 Sep 2013 16:04:14 +0200 Bernhard Reiter (issue1023) mapserver templates mapfile.vm, wsplgen_layer.vm explicitely adding the three projects, so that mapserver offers the in the capabilities.
Wed, 11 Sep 2013 15:40:51 +0200 Bernhard Reiter Closing inaktive branch "dc-km-filter-rr". dc-km-filter-rr
Wed, 11 Sep 2013 15:37:05 +0200 Bernhard Reiter Closing inactive branch. facets-slt
Wed, 11 Sep 2013 15:30:38 +0200 Sascha L. Teichmann Removed obsolete imports.
Wed, 11 Sep 2013 13:15:30 +0200 Sascha L. Teichmann flys/issue1485 Better titles for UESK layers.
Wed, 11 Sep 2013 11:41:29 +0200 Bernhard Reiter Closing branch 'interaktive-karte', the contents must have been merged (without hg tracking it) to default long ago because it is in there. interaktive-karte
Wed, 11 Sep 2013 11:41:29 +0200 Sascha L. Teichmann GWT client: Do not assumed there is always a SAML ticket when generating Wiki links.
Wed, 11 Sep 2013 09:59:00 +0200 Felix Wolfsteller issue1465: Removed fix for non-matching measurement station and stations range.
Wed, 11 Sep 2013 09:46:11 +0200 Felix Wolfsteller Backed out changeset 6b9402377d07
Tue, 10 Sep 2013 17:48:48 +0200 Sascha L. Teichmann flys/issue1417 Be more fault tolerant if a river has no flood plain.
Tue, 10 Sep 2013 15:22:59 +0200 Felix Wolfsteller issue1378: For additionals and basedata via datacage for
Tue, 10 Sep 2013 11:49:01 +0200 Felix Wolfsteller issue1457: Handle symbolic discharge of -1 as 'no discharge'.
Mon, 09 Sep 2013 16:05:31 +0200 Felix Wolfsteller Doc.
Tue, 10 Sep 2013 09:42:34 +0200 Bernhard Reiter mapserver templates for flys.map and rivers.map: correcting the wms_onlineresource URL to partly help (issue1023)
Mon, 09 Sep 2013 18:22:47 +0200 Sascha L. Teichmann Fix for Browser and server running both on localhost. Previously all requests from localhost where accepted w/o auth. Now they are only accepted when a HTTP header X_NO_GGINA_AUTH=TRUE is send, too. This is ddone when printing maps.
Fri, 06 Sep 2013 15:48:46 +0200 Felix Wolfsteller Corrected doc.
Fri, 06 Sep 2013 15:44:02 +0200 Felix Wolfsteller D4EArtifactCollection: Do not push CallContext and reference to db around.
Fri, 06 Sep 2013 15:40:38 +0200 Felix Wolfsteller Doc.
Fri, 06 Sep 2013 15:37:56 +0200 Felix Wolfsteller Doc.
Fri, 06 Sep 2013 15:36:59 +0200 Felix Wolfsteller Doc.
Fri, 06 Sep 2013 12:37:42 +0200 Felix Wolfsteller Correct SedimentLoadExporters compilability-fix.
Thu, 05 Sep 2013 19:05:00 +0200 Tom Gottfried Make EpsilonComparator serializable.
Thu, 05 Sep 2013 17:15:04 +0200 Sascha L. Teichmann flys/issue1235: Same kicks against a few inconsistencies and bugs in the calculation of sediment loads. I believe it _do_not_ delivers the right results.
Thu, 05 Sep 2013 15:47:24 +0200 Felix Wolfsteller Doc.
Thu, 05 Sep 2013 15:46:57 +0200 Felix Wolfsteller issue1465: Fetch correct measurement station (also if the km does not
Thu, 05 Sep 2013 15:31:58 +0200 Felix Wolfsteller SedimentLoadFactory: Improved readability.
Thu, 05 Sep 2013 15:28:59 +0200 Felix Wolfsteller SedimentLoadFactory: Further code simplification.
Thu, 05 Sep 2013 15:27:56 +0200 Felix Wolfsteller SedimentLoadFactory: Minor simplification.
Thu, 05 Sep 2013 15:23:54 +0200 Felix Wolfsteller SedimentLoadFactory: Extracted method to find range of matching
Thu, 05 Sep 2013 11:48:38 +0200 Felix Wolfsteller SedimentLoadExporter: Minor refac. Determine a displayed string
Wed, 04 Sep 2013 10:53:53 +0200 Sascha L. Teichmann Workaround for flys/issue14070. TODO: Find the reason why a null document is given to the ThemeDocument.
Tue, 03 Sep 2013 21:51:58 +0200 Felix Wolfsteller issue1458: Avoid facet duplicates.
Tue, 03 Sep 2013 21:50:23 +0200 Felix Wolfsteller Implement ManagedFacet.isSame to determine whether two facets are the same.
Tue, 03 Sep 2013 21:49:30 +0200 Felix Wolfsteller Added new CompareUtil (singleton Helper class).
Tue, 03 Sep 2013 10:33:38 +0200 Felix Wolfsteller AttributeWriter: Even better variable name.
Tue, 03 Sep 2013 10:31:26 +0200 Felix Wolfsteller AttributeWriter: Slightly improved variable naming and comments.
Fri, 30 Aug 2013 16:30:54 +0200 Felix Wolfsteller Added loadTotalRange getter.
Fri, 30 Aug 2013 15:45:14 +0200 Andre Heinecke (issue1452) Coalesce to zero to avoid NaN arithmetic.
Fri, 30 Aug 2013 12:32:08 +0200 Andre Heinecke (issue1023) Start returning more useful information
Fri, 30 Aug 2013 12:33:50 +0200 Felix Wolfsteller issue1462/3: When changing units (t/a -> m^3/a), also change total load.
Fri, 30 Aug 2013 12:32:29 +0200 Felix Wolfsteller SedimentLoad: Allow to set range of total load.
Fri, 30 Aug 2013 12:31:33 +0200 Felix Wolfsteller Doc fix.
Fri, 30 Aug 2013 12:30:51 +0200 Felix Wolfsteller SedimentLoadCalculation: Log an error on unknown mode.
Fri, 30 Aug 2013 09:48:11 +0200 Felix Wolfsteller issue1462: 1) & 4) Fix wrong density interpolation code.
Fri, 30 Aug 2013 09:47:15 +0200 Felix Wolfsteller Cosmetics, docs.
Fri, 30 Aug 2013 09:45:04 +0200 Felix Wolfsteller Cosmetics.
Fri, 30 Aug 2013 09:44:44 +0200 Felix Wolfsteller Doc.
Thu, 29 Aug 2013 16:37:53 +0200 Felix Wolfsteller Let hibernate do the parsing/casting.
Thu, 29 Aug 2013 16:33:43 +0200 Felix Wolfsteller issue957: Better name for flowvelocity measured values facets.
Thu, 29 Aug 2013 12:15:28 +0200 Felix Wolfsteller Assign theme to flowvelocitymeasurementvaluefacets.
Thu, 29 Aug 2013 12:15:05 +0200 Felix Wolfsteller Slightly better name for flowvelocitymeasurementvaluefacets.
Thu, 29 Aug 2013 11:28:55 +0200 Andre Heinecke (issue1451) Round Q's in the way it is done for AT's and localize KM
Thu, 29 Aug 2013 11:33:30 +0200 Felix Wolfsteller issue1466: Fix, sort stations before gap detection.
Thu, 29 Aug 2013 09:14:53 +0200 Felix Wolfsteller DischargeCurveGenerator: Prevent NPE when no gauge can be found.
Wed, 28 Aug 2013 12:02:56 +0200 Felix Wolfsteller issue1436: Exploit validity-rule of sedimentdensities.
Wed, 28 Aug 2013 11:55:14 +0200 Felix Wolfsteller issue1436: Towards finding the best match in years for densities.
Wed, 28 Aug 2013 11:22:40 +0200 Felix Wolfsteller issue1460: prevent NPEs when backstepping and changing Q values for WINFO
Wed, 28 Aug 2013 10:54:21 +0200 Tom Gottfried Importer Doc: be clearer on DEM-metadata import. double-precision
Tue, 27 Aug 2013 12:32:48 +0200 Tom Gottfried Importer doc: added remark considering re-import of modified data double-precision
Tue, 27 Aug 2013 19:14:12 +0200 Sascha L. Teichmann Datacage: Add dc:all-state-successors() to enable predicates like dc:contains(dc:all-state-successors($artifact-name, $current-state-id), 'state.winfo.calculation_mode') which recursively collects all successor state ids an check for containment.
Tue, 27 Aug 2013 18:37:24 +0200 Andre Heinecke (issue1451) Use distinct values for single_wq mode filtering instead of ranges.
Tue, 27 Aug 2013 18:35:51 +0200 Andre Heinecke Fix NPE in case the artifact does not even have the master attribute
Tue, 27 Aug 2013 16:16:13 +0200 Felix Wolfsteller DischargeLongitudinalSectionGenerator: Use QOutProcessor, fix compilation.
Tue, 27 Aug 2013 16:15:45 +0200 Felix Wolfsteller Let QOutProcessor also handle Discharge/Q-data.
Tue, 27 Aug 2013 14:58:03 +0200 Felix Wolfsteller SedimentLoadCalculation: Refactoring, extracted method.
Tue, 27 Aug 2013 12:46:11 +0200 Felix Wolfsteller issue1455: Extract QOutProcessor, use it
Tue, 27 Aug 2013 11:35:37 +0200 Felix Wolfsteller issue1455: Prepare MiddleBedHeightDiagram to show Q values.
Mon, 26 Aug 2013 15:35:39 +0200 Felix Wolfsteller WQKmsInterpolArtifact: Add different facet if wst has only 'fake' Qs.
Mon, 26 Aug 2013 15:34:46 +0200 Felix Wolfsteller Doc, cosmetics.
Mon, 26 Aug 2013 15:32:57 +0200 Felix Wolfsteller WstValueTable: Add method to find out wether the Qs are 'fake'
Mon, 26 Aug 2013 15:28:46 +0200 Felix Wolfsteller DischargeProcessor: Handle interpolated w values
Mon, 26 Aug 2013 15:24:21 +0200 Felix Wolfsteller Cosmetics, added @Override annotation, vim line.
Mon, 26 Aug 2013 15:23:46 +0200 Felix Wolfsteller Doc.
Mon, 26 Aug 2013 15:03:37 +0200 Felix Wolfsteller Added new Theme.
Mon, 26 Aug 2013 15:02:52 +0200 Felix Wolfsteller Added new ThemeMappings.
Mon, 26 Aug 2013 15:01:34 +0200 Felix Wolfsteller Mapping new facet type to theme.
Mon, 26 Aug 2013 14:53:41 +0200 Felix Wolfsteller Added new facet type to gaugedischargecurve.xml compat matrix.
Mon, 26 Aug 2013 14:40:53 +0200 Felix Wolfsteller FacetTypes: Added new type other.w.interpol .
Mon, 26 Aug 2013 14:28:19 +0200 Felix Wolfsteller Minor refactoring, renamed variable, extracted method.
Thu, 22 Aug 2013 14:58:56 +0200 Felix Wolfsteller Typo fix in debug message.
Fri, 23 Aug 2013 14:37:54 +0200 Sascha L. Teichmann Artifacts: ThemeDocument. More debug output. Make more getters private to only expose the parsed values.
Fri, 23 Aug 2013 14:17:35 +0200 Sascha L. Teichmann Artifacts: Make TextStyle Make more robust.
Fri, 23 Aug 2013 12:57:21 +0200 Tom Gottfried a bit of debug output
Fri, 23 Aug 2013 11:39:24 +0200 Sascha L. Teichmann Artifacts: ThemeDocument. Removed some zero length checks because we do not store zero length strings in the backing map.
Fri, 23 Aug 2013 11:07:11 +0200 Sascha L. Teichmann Artifacts: ThemeDocument. The bloody part: Removal of the XPaths. Now the theme XML document is scanned once(!) at construction time for field values and the resulting key/value pairs are store in a map.
Fri, 23 Aug 2013 01:17:13 +0200 Sascha L. Teichmann Artifacts: Removed ThemeUtil.
Fri, 23 Aug 2013 01:16:13 +0200 Sascha L. Teichmann Artifacts: Moved logic of ThemeUtils into ThemeDocument. TODO: Remove ThemeUtils
Thu, 22 Aug 2013 23:31:38 +0200 Sascha L. Teichmann Artifacts: Introduce ThemeDocument & make stuff compileable again. THIS BREAKS THE SYSTEM! TODO: Move ThemeUtils into ThemeDocument.
Thu, 22 Aug 2013 15:38:57 +0200 Sascha L. Teichmann Artifacts: Make it compilable again.
Thu, 22 Aug 2013 15:31:09 +0200 Sascha L. Teichmann ETL: Take care of the fact that one river in AFT/SGM may correspond to N rivers in FLYS.
Thu, 22 Aug 2013 15:22:59 +0200 Andre Heinecke Added tag 3.0.14 for changeset 84b1e87e8669
Thu, 22 Aug 2013 14:27:42 +0200 Felix Wolfsteller ComputedDischargeCurveGenerator: Use DischargeProcessor to add main values.
Thu, 22 Aug 2013 14:26:04 +0200 Felix Wolfsteller ChartGenerator: Changed visibility of doAnnotations,
Thu, 22 Aug 2013 14:24:44 +0200 Felix Wolfsteller DischargeCurveGenerator: Use DischargeProcessor.
Thu, 22 Aug 2013 14:24:13 +0200 Felix Wolfsteller DischargeProcessor: Handle main-values. Temporarily disable w/q data handling.
Thu, 22 Aug 2013 14:23:41 +0200 Felix Wolfsteller DischargeProcessor: Minor refactoring (use getter), warn when no Ẁ/Q data found.
Wed, 21 Aug 2013 17:15:06 +0200 Tom Gottfried Give correct name to outlier method 3.0.14
Wed, 21 Aug 2013 16:15:37 +0200 Sascha L. Teichmann Potential fix for flys/1453.
Wed, 21 Aug 2013 16:14:29 +0200 Sascha L. Teichmann Backed out changeset 60f39ee19473
Wed, 21 Aug 2013 16:13:36 +0200 Sascha L. Teichmann ETL: Potential fix for flys/1453.
Wed, 21 Aug 2013 15:46:39 +0200 Sascha L. Teichmann Removed obsolete imports.
Wed, 21 Aug 2013 15:41:58 +0200 Sascha L. Teichmann FixA: Remapped indices of analysis periods, too. Needs testing!
Wed, 21 Aug 2013 15:32:53 +0200 Tom Gottfried BWASTR-Import: name of tributary contains name of river, not the other way round. double-precision
Wed, 21 Aug 2013 15:00:40 +0200 Felix Wolfsteller issue1378: Add axis markers for additional long-sect. without Q (e.g. dike heights).
Wed, 21 Aug 2013 15:00:04 +0200 Felix Wolfsteller Cosmetics.
Wed, 21 Aug 2013 12:24:45 +0200 Felix Wolfsteller issue1378: Also add ability to add text-annotations.
Wed, 21 Aug 2013 12:40:42 +0200 Tom Gottfried Geo-Importer: import axes 2D to avoid problems with invalid z-coordinates double-precision
Wed, 21 Aug 2013 12:01:50 +0200 Sascha L. Teichmann FixA: Fix logger class reference.
Wed, 21 Aug 2013 11:12:39 +0200 Felix Wolfsteller issue1378 (part): Make DC config for discharge curve offer correct
Wed, 21 Aug 2013 11:11:56 +0200 Felix Wolfsteller issue1378: Prepare DischargeCurveGenerator to digest wq-interpolated data.
Wed, 21 Aug 2013 11:11:22 +0200 Felix Wolfsteller Cosmetics.
Wed, 21 Aug 2013 11:10:45 +0200 Felix Wolfsteller issue1378: Prepare StyledSeriesBuilder to get double[][] values to translate.
Tue, 20 Aug 2013 15:05:07 +0200 Felix Wolfsteller issue1378: Preparing DischargeProcessor to be able to draw W/Q points,
Tue, 20 Aug 2013 14:35:48 +0200 Felix Wolfsteller Cosmetics.
Tue, 20 Aug 2013 13:03:03 +0200 Felix Wolfsteller Initial DischargeProcessor-commit (skeleton).
Wed, 21 Aug 2013 01:09:25 +0200 Sascha L. Teichmann FixA: Make dates of analysis periods unique, too. TODO: Remap the indices like the reference interval.
Tue, 20 Aug 2013 19:50:37 +0200 Sascha L. Teichmann FixA W/Q Diagram: Allow duplicate points. It should work but it doesn't. :-/
Tue, 20 Aug 2013 19:24:26 +0200 Sascha L. Teichmann FixA: Fixed reference events mapping. TODO: Same for analysis periods.
Tue, 20 Aug 2013 11:20:25 +0200 Sascha L. Teichmann FixA Delta W(t): Add 30 seconds to colliding dates to avoid them vanishing from the diagrams.
Mon, 19 Aug 2013 22:19:09 +0200 Sascha L. Teichmann FixA: Reference points facets: the index of the point is stored in the lower 8 bits of the facect index. Why was it search via getIndex()?
Mon, 19 Aug 2013 22:04:03 +0200 Sascha L. Teichmann FixA overview: Fetch dates in higher resolution from database.
Mon, 19 Aug 2013 17:29:52 +0200 Tom Gottfried Undo misguided schema change from r5207 double-precision
Mon, 19 Aug 2013 16:28:01 +0200 Andre Heinecke (issue1071) Increase river km column width
Mon, 19 Aug 2013 16:37:04 +0200 Felix Wolfsteller issue738: Adjust S/Q-Relation Diagram subtitles.
Mon, 19 Aug 2013 16:29:28 +0200 Sascha L. Teichmann Fix Analysis: Code simplification in facets.
Mon, 19 Aug 2013 16:02:48 +0200 Sascha L. Teichmann Client: Removed an XPath eval and simplified a loop.
Mon, 19 Aug 2013 12:48:03 +0200 Andre Heinecke Add small script to generate an issue overview from a roundup querry.
Mon, 19 Aug 2013 12:45:27 +0200 Sascha L. Teichmann Factored our date formatter.
Mon, 19 Aug 2013 12:44:11 +0200 Sascha L. Teichmann Break long lines.
Mon, 19 Aug 2013 12:43:24 +0200 Felix Wolfsteller issue1225: Add bedheight/year-difference points with a scale factor,
Mon, 19 Aug 2013 12:42:27 +0200 Felix Wolfsteller StyledSeriesBuilder: Added new method to add points with a scane factor.
Mon, 19 Aug 2013 12:22:31 +0200 Felix Wolfsteller Minor refactoring.
Mon, 19 Aug 2013 11:56:17 +0200 Felix Wolfsteller issue1395: Add missing w_differences compat to new chart ls.
Mon, 19 Aug 2013 11:41:09 +0200 Andre Heinecke (issue1347) Add SQ Relation fields for measurement station information
Mon, 19 Aug 2013 11:40:34 +0200 Andre Heinecke (issue1347) Update jasper templates with new fields
Mon, 19 Aug 2013 11:34:47 +0200 Andre Heinecke (issue1347) Add measurement station getter for location
Mon, 19 Aug 2013 10:35:27 +0200 Andre Heinecke Make debug functions of D4EArtifact public
Mon, 19 Aug 2013 10:55:52 +0200 Felix Wolfsteller Merged backout of changes for 1440 (gap-detection in bedquality).
Mon, 19 Aug 2013 10:55:13 +0200 Felix Wolfsteller Backed out changeset 10646f31efec
Mon, 19 Aug 2013 10:20:51 +0200 Felix Wolfsteller Merged.
Mon, 19 Aug 2013 10:19:06 +0200 Felix Wolfsteller issue1157: Only look at the best match for CrossSections to activate.
Fri, 16 Aug 2013 11:30:07 +0200 Andre Heinecke (issue1391): Build the current discarge curve name as requested
Fri, 16 Aug 2013 10:43:44 +0200 Andre Heinecke (issue1391)Add compatibility for hist.discharge in Hist discharge output
Fri, 16 Aug 2013 09:39:27 +0200 Andre Heinecke (issue1391) Filter by reference_gauge or by KM
Fri, 16 Aug 2013 09:38:15 +0200 Andre Heinecke Minor layout change
Sat, 17 Aug 2013 20:08:51 +0200 Sascha L. Teichmann Fixing Analysis: Significantly (8-10x) improved the performance of the generation of the overview data. The data is now prefetched in batches.
Sat, 17 Aug 2013 12:17:42 +0200 Sascha L. Teichmann Removed _stupid_ TODO question. WE WANT PULL OUT LOGIC OUT OF ARTIFACTS!
Fri, 16 Aug 2013 09:16:30 +0200 Andre Heinecke Add FixingCalculatedPoint to second theme, too
Thu, 15 Aug 2013 18:56:20 +0200 Sascha L. Teichmann Part of flys/issue1168: Make facet names unique. It should help but there must be bug before the facet generation.
Thu, 15 Aug 2013 18:00:16 +0200 Andre Heinecke (issue1444) Add theme for fixing calculated point
Thu, 15 Aug 2013 16:50:21 +0200 Andre Heinecke Readd accidentally removed line
Thu, 15 Aug 2013 16:26:50 +0200 Andre Heinecke (Issue1357) Pull river name into getReferenceGauge
Thu, 15 Aug 2013 16:25:50 +0200 Andre Heinecke Improve debug output in timerangestate
Thu, 15 Aug 2013 16:05:17 +0200 Andre Heinecke (issue1353) Add river name handling
Thu, 15 Aug 2013 15:57:54 +0200 Andre Heinecke (issue1353) Add method to model to gauge by number and river name
Thu, 15 Aug 2013 15:57:13 +0200 Andre Heinecke (issue1353) Add river name to query for discharge Info
Thu, 15 Aug 2013 15:50:42 +0200 Sascha L. Teichmann Part of flys/issue1168: Fix themes of fixings delta w averages. Bring default and second theme back in snyc.
Thu, 15 Aug 2013 15:01:18 +0200 Sascha L. Teichmann Part of flys/issue1168: Show discharge sector averages as lines again.
Thu, 15 Aug 2013 13:40:43 +0200 Christian Lins Add missing import in ArtifactMapfileGenerator
Thu, 15 Aug 2013 13:35:18 +0200 Christian Lins (issue657) Prevent errornous recreation of usershape mapfile fragment.
Thu, 15 Aug 2013 13:30:16 +0200 Christian Lins (issue657) Use regular expressions in Mapfile templates to catch various spellings of feature class types.
Wed, 14 Aug 2013 16:50:35 +0200 Sascha L. Teichmann Backed out changeset 74a437805e2a
Wed, 14 Aug 2013 16:24:12 +0200 Andre Heinecke (issue1347) Localize outliers and pdf Header
Wed, 14 Aug 2013 15:26:50 +0200 Andre Heinecke (Issue1347) Update jasper files for pdf export of new data
Wed, 14 Aug 2013 15:23:36 +0200 Andre Heinecke (issue1347) Add new variables to SQ Relation output.
Wed, 14 Aug 2013 15:20:01 +0200 Andre Heinecke Fix typo in SQRelation calculation
Wed, 14 Aug 2013 14:20:59 +0200 Christian Lins Mapfile templates contain regex expressions to catch features more robust (#657).
Wed, 14 Aug 2013 12:54:00 +0200 Tom Gottfried import_rivers.sh: skip cross sections instead of WST-file in first run. double-precision
Wed, 14 Aug 2013 12:21:13 +0200 Tom Gottfried Importer Doc: force import of waterlevel WST-file in first run. double-precision
Wed, 14 Aug 2013 12:10:44 +0200 Tom Gottfried Importer: force import of waterlevel WST-file in first run. double-precision
Wed, 14 Aug 2013 11:28:30 +0200 Sascha L. Teichmann S/Q relation: Fixed broken parameter creator constructor.
Wed, 14 Aug 2013 11:01:16 +0200 Sascha L. Teichmann S/Q relation: Added forgotten class.
Tue, 13 Aug 2013 15:24:19 +0200 Tom Gottfried issue1328: improved i18n message
Tue, 13 Aug 2013 09:51:15 +0200 Tom Gottfried WstParser: warn only once if no unit comment is found double-precision
Mon, 12 Aug 2013 18:14:12 +0200 Tom Gottfried Make postgresql-setup helper script work on different platforms. double-precision
Mon, 12 Aug 2013 18:12:14 +0200 Tom Gottfried fixed syntax errors in Postgres-schema. double-precision
Mon, 12 Aug 2013 08:27:21 +0200 Tom Gottfried Importer: set memory size according to doc double-precision
Mon, 12 Aug 2013 08:16:13 +0200 Tom Gottfried Geo-importer: remove leftovers of catchment and gauge location importers double-precision
Sat, 10 Aug 2013 12:25:58 +0200 Tom Gottfried Importer Doc: Update title page automatically. double-precision
Fri, 09 Aug 2013 21:40:30 +0200 Tom Gottfried Importer Doc: remove obsolete README. It is all in the tex-files now. double-precision
Fri, 09 Aug 2013 21:35:53 +0200 Tom Gottfried Importer doc: correctly document use of gew-file for geo-importer. double-precision
Fri, 09 Aug 2013 21:27:57 +0200 Tom Gottfried Geo-importer and doc: use commandline-argument instead of configuration for river selection. double-precision
Fri, 09 Aug 2013 20:47:10 +0200 Tom Gottfried Importer Doc: complete master data of gauges and waterlevel model and move to top. double-precision
Fri, 09 Aug 2013 20:30:14 +0200 Tom Gottfried WstParser and Importer doc: More sensible default unit and warn if it is used. double-precision
Fri, 09 Aug 2013 18:07:49 +0200 Tom Gottfried Importer Doc: move general information on geo-importer to overview. double-precision
Fri, 09 Aug 2013 18:06:40 +0200 Tom Gottfried Importer Doc: corrections to starting of geo-importer. double-precision
Fri, 09 Aug 2013 17:59:02 +0200 Tom Gottfried Importer Doc: corrections of geo-importer configuration. double-precision
Fri, 09 Aug 2013 17:57:12 +0200 Tom Gottfried Geo-importer: use commandline-argument instead of configuration for river selection. double-precision
Fri, 09 Aug 2013 17:27:16 +0200 Tom Gottfried Importer Doc: document DEM-Metadata import. double-precision
Fri, 09 Aug 2013 17:11:13 +0200 Tom Gottfried Importer Doc: reworked sectioning of geo-importer overview. double-precision
Fri, 09 Aug 2013 16:52:08 +0200 Tom Gottfried Importer Doc: completed description of shapefile-parsers. double-precision
Fri, 09 Aug 2013 15:55:50 +0200 Tom Gottfried Importer Doc: add description of alternativ attribut-names. double-precision
Fri, 09 Aug 2013 15:42:36 +0200 Tom Gottfried Importer Doc: reformat tables in parser descriptions of geo-importer. double-precision
Fri, 09 Aug 2013 13:36:05 +0200 Tom Gottfried Removed obsolete imports. longitudinal-symmetry
Fri, 09 Aug 2013 13:32:47 +0200 Tom Gottfried Move Funcionality related to bed quality from FlowVelocityGenerator to LongitudinalSectionGenerator (previously left over). longitudinal-symmetry
Fri, 09 Aug 2013 18:29:08 +0200 Sascha L. Teichmann S/Q relation: Spell Ferguson with F.
Fri, 09 Aug 2013 18:24:55 +0200 Sascha L. Teichmann flys/issue1347: Added missing calcutions. TODO: Bring them into the generated outs.
Fri, 09 Aug 2013 12:20:32 +0200 Felix Wolfsteller Cosmetics.
Fri, 09 Aug 2013 12:11:53 +0200 Tom Gottfried Moved most of the functionality of FlowVelocityGenerator to LongitudinalSectionGenerator on the way to longitudinal-section symmetry. ToDos left. longitudinal-symmetry
Thu, 08 Aug 2013 17:36:44 +0200 Tom Gottfried merged changes from default into longitudinal-symmetry branch longitudinal-symmetry
Wed, 07 Aug 2013 18:57:29 +0200 Tom Gottfried merged changes from default into longitudinal-symmetrie branch longitudinal-symmetry
Wed, 07 Aug 2013 18:53:15 +0200 Tom Gottfried merge changes from default into longitudinal-symmetrie branch and make it build longitudinal-symmetry
Fri, 09 Aug 2013 08:34:10 +0200 Felix Wolfsteller issue1378: Handle static_wqkms.w as annotations.
Fri, 09 Aug 2013 08:33:38 +0200 Felix Wolfsteller Cosmetics.
Fri, 09 Aug 2013 08:32:37 +0200 Felix Wolfsteller issue1378: Add wqkms.w|q to discharge curve facet compat list.
Thu, 08 Aug 2013 18:14:38 +0200 Sascha L. Teichmann S/Q: Excel compat completed: Now the data is linearized before fitting. This can be prevented by setting the system property S/Q: Excel compat completed: Now the data is linearized before fitting. This can be prevented by setting the system property "minfo.sq.calcution.non.linear.fitting" to true.
Thu, 08 Aug 2013 16:19:59 +0200 Felix Wolfsteller Removed debug output.
Thu, 08 Aug 2013 16:03:41 +0200 Felix Wolfsteller SedimentLoadFactory: Survive not completely defined sediment loads.
Thu, 08 Aug 2013 15:46:18 +0200 Felix Wolfsteller issue1060: i18n.
Thu, 08 Aug 2013 12:09:48 +0200 Felix Wolfsteller Added @Override-Annotation.
Thu, 08 Aug 2013 12:09:26 +0200 Felix Wolfsteller added vimline
Thu, 08 Aug 2013 12:08:18 +0200 Felix Wolfsteller Doc.
Thu, 08 Aug 2013 12:17:03 +0200 Sascha L. Teichmann S/Q relation: Part I of 'faking' fitting linear data. S/Qs can now be subclassed and processed through views. TODO: Add knob to setup a linear data path.
Thu, 08 Aug 2013 12:06:54 +0200 Felix Wolfsteller offer differences for bedheight-diffs in dc, and bedheight diffs in ls.
Thu, 08 Aug 2013 10:38:36 +0200 Felix Wolfsteller issue1439: Show line segments for points that have gaps on both sides. Small refac.
Wed, 07 Aug 2013 19:36:05 +0200 Sascha L. Teichmann S/Q relation: More Excel compat.
Wed, 07 Aug 2013 18:24:07 +0200 Andre Heinecke Remove accidentally commited debug output
Wed, 07 Aug 2013 16:04:05 +0200 Felix Wolfsteller issue1415: Corrected update query and parameter setting.
Wed, 07 Aug 2013 14:29:25 +0200 Tom Gottfried Geo-importer: removed unused variable. double-precision
Wed, 07 Aug 2013 14:22:48 +0200 Tom Gottfried Geo-importer: removed obsolete run-script. double-precision
Wed, 07 Aug 2013 14:05:07 +0200 Felix Wolfsteller issue1440: Add gap detection at >101m for BedQuality LS diagrams.
Wed, 07 Aug 2013 11:07:37 +0200 Felix Wolfsteller issue1439: reduce gap-tolerance to 101m.
Wed, 07 Aug 2013 11:04:12 +0200 Felix Wolfsteller issue1439: Use auto-gap detect when adding points to series for bed diff data.
Wed, 07 Aug 2013 11:02:43 +0200 Felix Wolfsteller StyledSeriesBuilder: Minor doc improvement.
Wed, 07 Aug 2013 11:02:01 +0200 Felix Wolfsteller Cosmetics.
Wed, 07 Aug 2013 11:00:55 +0200 Felix Wolfsteller QualityMeasurementFactory: Doc about singleton usage.
Wed, 07 Aug 2013 10:59:53 +0200 Felix Wolfsteller Made trivial QualityMeasurement-constructor private, as it shouldnt be used.
Wed, 07 Aug 2013 10:59:02 +0200 Felix Wolfsteller Doc.
Wed, 07 Aug 2013 10:54:05 +0200 Felix Wolfsteller Cosmetics.
Wed, 07 Aug 2013 10:48:53 +0200 Felix Wolfsteller cosmetics.
Tue, 06 Aug 2013 18:46:40 +0200 Tom Gottfried Importer Doc: error in W80CSV-Parser. double-precision
Tue, 06 Aug 2013 17:00:49 +0200 Sascha L. Teichmann flys/issue748: Force linear curve fitting. This is a real hack! Set the system property "minfo.sq.fitting.nonlinear" to re-enable the old behavior.
Tue, 06 Aug 2013 16:57:47 +0200 Felix Wolfsteller issue1416: missing english i18n.
Tue, 06 Aug 2013 16:56:45 +0200 Felix Wolfsteller issue1416: exporter for sedimentload and i18n.
Tue, 06 Aug 2013 16:39:41 +0200 Felix Wolfsteller issue1436: Remove wrong condition where previous value does not exist but is
Tue, 06 Aug 2013 16:03:56 +0200 Felix Wolfsteller issue1435: Tolerate missing measurement values in QualityMeasurements.
Tue, 06 Aug 2013 12:26:21 +0200 Felix Wolfsteller issue1433: Update caller for last commit.
Tue, 06 Aug 2013 12:25:53 +0200 Felix Wolfsteller issue1433: Filter loaded unknown sediment yields by kind.
Tue, 06 Aug 2013 11:04:12 +0200 Tom Gottfried merged changes from default into double-precision branch double-precision
Tue, 06 Aug 2013 11:06:25 +0200 Felix Wolfsteller issue1433: Include trailing empty strings in stringsplit, this prevents emission
Tue, 06 Aug 2013 10:54:41 +0200 Felix Wolfsteller issue1433: Do not emit warning when tolerated empty string as value.
Mon, 05 Aug 2013 18:39:12 +0200 Tom Gottfried Importer Doc: partly completed geo-importer parsers (with layout issues) double-precision
Mon, 05 Aug 2013 11:39:59 +0200 Tom Gottfried Importer Doc: completion and corrections to overview of geo-importer. double-precision
Mon, 05 Aug 2013 11:21:05 +0200 Tom Gottfried Importer Doc: Document reprojection of geo-data. double-precision
Mon, 05 Aug 2013 15:24:44 +0200 Sascha L. Teichmann Removed obsolete imports.
Sat, 03 Aug 2013 13:06:29 +0200 Tom Gottfried Importer Dok: added missing warnings to hydr-morph section double-precision
Fri, 02 Aug 2013 11:51:08 +0200 Tom Gottfried Sediment Density parser: avoid NPE when no year is given double-precision
Fri, 02 Aug 2013 11:36:33 +0200 Tom Gottfried Sediment density parser: fetch year from metaline and parse double-precision
Thu, 01 Aug 2013 15:37:17 +0200 Felix Wolfsteller issue1337: fix. Let theme not inherit from longitudinal_section, as this
Thu, 01 Aug 2013 15:16:32 +0200 Felix Wolfsteller meta-data.xml/DC: Automatically add annotations to middle bed height diagrams.
Thu, 01 Aug 2013 13:07:37 +0200 Tom Gottfried Importer Doc: fix syntax error. double-precision
Thu, 01 Aug 2013 12:08:46 +0200 Felix Wolfsteller issue1393: Survive when off-epochs no total data, but other.
Thu, 01 Aug 2013 11:58:25 +0200 Felix Wolfsteller Cosmetics, docs, in range of issue1393.
Thu, 01 Aug 2013 10:15:00 +0200 Felix Wolfsteller issue1418: Fetch correct (not necessarily first) gauge
Thu, 01 Aug 2013 10:02:36 +0200 Tom Gottfried Geo-Importer: Don not import misc. floodplains as hydraulic boundary. double-precision
Wed, 31 Jul 2013 15:41:57 +0200 Felix Wolfsteller issue1393: Avoid NPE for off-epoch when actually no off-epoch data available.
Wed, 31 Jul 2013 15:27:51 +0200 Felix Wolfsteller issue1393: Fix theme association for sedimentload.total_load .
Wed, 31 Jul 2013 14:29:12 +0200 Tom Gottfried Schema change: Store station of cross section lines with higher precision to avoid duplicates due to rounding. double-precision
Wed, 31 Jul 2013 13:10:34 +0200 Felix Wolfsteller Doc.
Wed, 31 Jul 2013 12:31:09 +0200 Tom Gottfried merged changes from default into double-precision branch double-precision
Wed, 31 Jul 2013 12:40:04 +0200 Felix Wolfsteller Remove cryptic warning messages.
Wed, 31 Jul 2013 12:31:35 +0200 Felix Wolfsteller issue1393: Fix display, no description, just years needed to select official epochs.
Wed, 31 Jul 2013 11:31:23 +0200 Tom Gottfried merged changes from default into double-precision branch double-precision
Wed, 31 Jul 2013 11:36:21 +0200 Felix Wolfsteller Cosmetics.
Wed, 31 Jul 2013 11:35:54 +0200 Felix Wolfsteller issue1393/SedLoadOffEpochPanel: Request the correct (off-epoch) data
Wed, 31 Jul 2013 11:34:31 +0200 Felix Wolfsteller Doc.
Wed, 31 Jul 2013 11:32:33 +0200 Felix Wolfsteller Cosmetics, docs.
Wed, 31 Jul 2013 11:32:00 +0200 Felix Wolfsteller issu1393/SedimentLoadFactory: Handle off_epoch type queries.
Wed, 31 Jul 2013 11:13:41 +0200 Felix Wolfsteller issue1393/ImportRiver: Import official epochs from directory, minor refac.
Wed, 31 Jul 2013 11:12:53 +0200 Felix Wolfsteller issue1393/SedimentYieldParser: set kind of SedimentYields
Wed, 31 Jul 2013 11:12:08 +0200 Felix Wolfsteller issue1393/backend: Add kind property to ImportSedimentYield and SedimentYield.
Wed, 31 Jul 2013 11:10:11 +0200 Felix Wolfsteller minfo-schema-change/issue1393: add kind column to sediment_yield table.
Wed, 31 Jul 2013 11:07:48 +0200 Felix Wolfsteller Doc.
Tue, 30 Jul 2013 18:27:58 +0200 Felix Wolfsteller Cosmetics.
Tue, 30 Jul 2013 19:15:41 +0200 Andre Heinecke Added tag 3.0.13 for changeset 71da3d4ffb4a
Tue, 30 Jul 2013 19:14:49 +0200 Andre Heinecke issue1391: Some more unification fix km filtering for calculated discharges 3.0.13
Tue, 30 Jul 2013 18:59:35 +0200 Andre Heinecke Add compatibility with more facet names for mainvalues.
Tue, 30 Jul 2013 18:54:53 +0200 Tom Gottfried Importer Doc: completed and corrected section with warnings. double-precision
Tue, 30 Jul 2013 17:32:28 +0200 Andre Heinecke issue748: Change StandardDeviation implmentation to what BFG calls Standard Deviation
Tue, 30 Jul 2013 16:24:59 +0200 Felix Wolfsteller Doc
Tue, 30 Jul 2013 15:56:34 +0200 Felix Wolfsteller Cosmetics.
Tue, 30 Jul 2013 07:35:57 +0200 Felix Wolfsteller Doc.
Tue, 30 Jul 2013 16:09:40 +0200 Christian Lins Remove duplicate code for mapfile generation. ID problem still not fixed (#657).
Tue, 30 Jul 2013 12:33:05 +0200 Andre Heinecke issue767: Do not encode the complete legend url
Tue, 30 Jul 2013 11:19:54 +0200 Andre Heinecke Remove accidental commited debug output
Tue, 30 Jul 2013 11:19:27 +0200 Andre Heinecke issue1391: Unify theme styles and add facet compatibilities
Tue, 30 Jul 2013 09:54:59 +0200 Tom Gottfried Importer scripts: add skip flag for W80-CSV to import_river.sh double-precision
Mon, 29 Jul 2013 19:21:07 +0200 Andre Heinecke issue766: Minimal fix for doubled RiverAxis.
Mon, 29 Jul 2013 17:27:48 +0200 Andre Heinecke Fix syntax error
Mon, 29 Jul 2013 12:53:52 +0200 Andre Heinecke issue1391: Add forgotten i18n for historical discharges
Mon, 29 Jul 2013 15:21:44 +0200 Tom Gottfried Importer Doc: Errors not documented so far double-precision
Mon, 29 Jul 2013 13:39:24 +0200 Tom Gottfried Importer doc: Document error when no measurement station fits station in SQ-file double-precision
Mon, 29 Jul 2013 12:32:29 +0200 Tom Gottfried Importer Dok: removed redundant doc and syntax error double-precision
Mon, 29 Jul 2013 12:26:13 +0200 Tom Gottfried Importer Doc: small corrections to configuration and typo double-precision
Mon, 29 Jul 2013 12:10:59 +0200 Tom Gottfried Importer Dok: document import_river.sh double-precision
Mon, 29 Jul 2013 11:56:21 +0200 Tom Gottfried Importer Doc: small corrections to morphological data double-precision
Mon, 29 Jul 2013 11:49:30 +0200 Tom Gottfried Importer Dok: documented measurement stations double-precision
Mon, 29 Jul 2013 15:02:22 +0200 Felix Wolfsteller issue1418: skip MainValues with NaN values.
Mon, 29 Jul 2013 12:29:40 +0200 Andre Heinecke issue1391: Add new facets for gaugedischarge
Mon, 29 Jul 2013 12:19:57 +0200 Andre Heinecke issue1391: Enable GaugeDischarge artifact to directly load a table by its ID
Mon, 29 Jul 2013 12:17:11 +0200 Andre Heinecke issue1891: Add method to get a discharge table by it's id
Mon, 29 Jul 2013 12:16:12 +0200 Andre Heinecke issue1391: Unify datacage elements in discharge curve outs and add historical discharges
Mon, 29 Jul 2013 12:14:51 +0200 Andre Heinecke issue1391: Fix syntax in gauge macros and add km filtering
Mon, 29 Jul 2013 11:56:03 +0200 Felix Wolfsteller issue1393: Handle bedheightdiff-facets in LS Generator.
Mon, 29 Jul 2013 11:55:35 +0200 Felix Wolfsteller issue1393: Add bedheight-difference facets to chart.xml longitudinal-section
Mon, 29 Jul 2013 10:14:32 +0200 Andre Heinecke Do not translate river annotations twice. (issue1370)
Fri, 26 Jul 2013 16:28:34 +0200 Andre Heinecke Activate also in historical discharge
Mon, 29 Jul 2013 09:30:44 +0200 Felix Wolfsteller issue1416: SedimentLoadExporter: Implemented rough output.
Mon, 29 Jul 2013 09:28:32 +0200 Felix Wolfsteller Prepare i18n for issue1416.
Mon, 29 Jul 2013 09:26:32 +0200 Felix Wolfsteller Use full stop in doc. This fixes my syntax highlight :) .
Mon, 29 Jul 2013 09:25:04 +0200 Felix Wolfsteller Doc.
Mon, 29 Jul 2013 09:24:16 +0200 Felix Wolfsteller Use foreach instead of for-loop.
Mon, 29 Jul 2013 09:23:20 +0200 Felix Wolfsteller Doc, vimline.
Mon, 29 Jul 2013 09:22:39 +0200 Felix Wolfsteller Added @Override annotation.
Mon, 29 Jul 2013 09:22:11 +0200 Felix Wolfsteller Doc.
Mon, 29 Jul 2013 09:21:14 +0200 Felix Wolfsteller Doc.
Fri, 26 Jul 2013 12:55:34 +0200 Felix Wolfsteller Cosmetics, docs, imports.
Fri, 26 Jul 2013 16:25:36 +0200 Tom Gottfried Importer doc: fixed typos, language and formatting issues for hydrological data double-precision
Fri, 26 Jul 2013 16:13:31 +0200 Tom Gottfried Importer doc: cross section import completed. double-precision
Fri, 26 Jul 2013 16:11:39 +0200 Tom Gottfried Importer Doc: document that Amtl_Linien.config is needed. double-precision
Fri, 26 Jul 2013 15:31:09 +0200 Tom Gottfried Importer doc: move paragraphs on main values and WST to correct section double-precision
Fri, 26 Jul 2013 15:24:36 +0200 Tom Gottfried Importer doc: comment out obsolete paragraph on invalid gauge numbers. double-precision
Fri, 26 Jul 2013 15:12:59 +0200 Tom Gottfried Importer doc: small formating corrections to overview. double-precision
Fri, 26 Jul 2013 14:52:47 +0200 Tom Gottfried Importer doc: small language corrections to Overview double-precision
Fri, 26 Jul 2013 10:45:47 +0200 Felix Wolfsteller issue1416: Move a stub new SedimentLoadExporter in place.
Fri, 26 Jul 2013 09:21:47 +0200 Felix Wolfsteller BedDifferenceExporter: Added licence header.
Fri, 26 Jul 2013 08:59:55 +0200 Felix Wolfsteller issue1259: in WQAdaptedInputPanel (vollmer w/q-input) allow
Thu, 25 Jul 2013 15:08:13 +0200 Felix Wolfsteller issue1413: Only show unknown sediment loads of selected unit type.
Thu, 25 Jul 2013 14:58:21 +0200 Felix Wolfsteller SedimentLoadUnknownFacet: Removed another debugging obstacle (wrong class for logger).
Thu, 25 Jul 2013 12:39:51 +0200 Felix Wolfsteller Fix, missed to commit a typo correction.
Thu, 25 Jul 2013 12:37:25 +0200 Felix Wolfsteller Fixed typo that made me search longer than necessary.
Thu, 25 Jul 2013 12:06:09 +0200 Felix Wolfsteller fix issue1415: Update state of artifact when storing artifact.
Thu, 25 Jul 2013 12:05:22 +0200 Felix Wolfsteller issue1415: Define update statement for artifacts state.
Thu, 25 Jul 2013 10:19:58 +0200 Andre Heinecke Make mainvalues active in discharge_curve and fix_wq_curve (issue1391)
Thu, 25 Jul 2013 09:30:39 +0200 Tom Gottfried Importer scripts: shpimporter needs backend name to play with Oracle. double-precision
Thu, 25 Jul 2013 07:22:28 +0200 Felix Wolfsteller fix issue1412: make vollmer-curves functional in middle bedheight diagrams.
Thu, 25 Jul 2013 07:12:51 +0200 Felix Wolfsteller meta-data.xml: Partly fix a filter expression (unclodes literal).
Wed, 24 Jul 2013 19:03:33 +0200 Andre Heinecke Cast ld values to varchar in user artifacts statement
Wed, 24 Jul 2013 18:20:16 +0200 Andre Heinecke Add zero padding to minutes and seconds of a_creation times
Wed, 24 Jul 2013 17:34:48 +0200 Andre Heinecke Add some useful debug output.
Wed, 24 Jul 2013 18:41:22 +0200 Tom Gottfried Purge tables when droping in Oracle to free space and avoid duplicates in views such as dba_constraints double-precision
Wed, 24 Jul 2013 18:39:42 +0200 Tom Gottfried Importer scripts: add default encoding to correctly read gew-files double-precision
Wed, 24 Jul 2013 17:24:02 +0200 Tom Gottfried fixed statement for floodplains in datacage-config (with Andre's eyes)
Wed, 24 Jul 2013 10:50:43 +0200 Felix Wolfsteller Collapse overly complicated dc-filter-statement for vollmer-curves.
Wed, 24 Jul 2013 08:52:42 +0200 Felix Wolfsteller vimline added.
Tue, 23 Jul 2013 12:10:28 +0200 Felix Wolfsteller Fix doc typo.
Tue, 23 Jul 2013 09:56:01 +0200 Felix Wolfsteller Fix misleading debug output.
Wed, 24 Jul 2013 10:41:21 +0200 Andre Heinecke Remove duplicated discharge_table_gauge macros and calls
Wed, 24 Jul 2013 10:18:33 +0200 Andre Heinecke Unify duplicated fix-wq-curve case
Tue, 23 Jul 2013 17:59:48 +0200 Andre Heinecke Only look to W facets for inversion handling.
Tue, 23 Jul 2013 18:05:11 +0200 Tom Gottfried Schema change: droped NOT NULL constraint from attributes.value because empty string is silently converted to NULL in Oracle but needed here. double-precision
Tue, 23 Jul 2013 17:11:07 +0200 Tom Gottfried More correct i18n string for outlier tolerance in SQ
Sat, 29 Jun 2013 00:20:58 +0200 Tom Gottfried merge
Sat, 29 Jun 2013 00:15:14 +0200 Tom Gottfried backout changeset 6513:ef3b02034f6a
Sat, 29 Jun 2013 00:06:35 +0200 Tom Gottfried Backed out changeset 1a7f5d09b9d8
Tue, 23 Jul 2013 15:09:30 +0200 Andre Heinecke Subtract PNP before calculating wcm from wMinCM (issue1155)
Tue, 23 Jul 2013 11:59:07 +0200 Tom Gottfried Importer doc: Complete gauge master data. double-precision
Tue, 23 Jul 2013 09:49:11 +0200 Andre Heinecke Do not invert chart when adding point data. (issue1290)
Mon, 22 Jul 2013 17:40:41 +0200 Andre Heinecke Fix Waterlevel description for issue1404
Mon, 22 Jul 2013 18:16:40 +0200 Tom Gottfried Importer docs: Improved layout. double-precision
Mon, 22 Jul 2013 18:06:23 +0200 Tom Gottfried Schema changes: fixed typos, syntax errors and missing or obsolete statements in Oracle schema double-precision
Mon, 22 Jul 2013 16:57:56 +0200 Tom Gottfried Fixed documentation for Oracle schema. double-precision
Mon, 22 Jul 2013 16:27:47 +0200 Tom Gottfried completed documentation for Oracle schema double-precision
Mon, 22 Jul 2013 13:06:12 +0200 Tom Gottfried Geo importer: also accept 25D-points from km.shp double-precision
Mon, 22 Jul 2013 13:03:42 +0200 Tom Gottfried merged changes from default into double-precision branch double-precision
Mon, 22 Jul 2013 11:18:26 +0200 Andre Heinecke Added tag 3.0.12 for changeset da197a9236fd
Mon, 22 Jul 2013 11:18:13 +0200 Andre Heinecke Removed tag 3.0.12 3.0.12
Mon, 22 Jul 2013 11:24:56 +0200 Felix Wolfsteller WINFOArtifact: Fix typo.
Mon, 22 Jul 2013 11:06:24 +0200 Andre Heinecke Added tag 3.0.12 for changeset 3999162f474f
Mon, 22 Jul 2013 11:11:05 +0200 Felix Wolfsteller DatacageTwinPanel: Show busy-wheel when loading and adding artifacts to collection.
Mon, 22 Jul 2013 11:07:14 +0200 Felix Wolfsteller CrossSection: Uppercase sql keywords in query.
Mon, 22 Jul 2013 11:03:41 +0200 Felix Wolfsteller CrossSection: Improve SQl compat of statement.
Fri, 19 Jul 2013 13:52:35 +0200 Felix Wolfsteller issue1395: Show bedheight diffs in w-diff datacage.
Fri, 19 Jul 2013 13:39:40 +0200 Felix Wolfsteller issue1399: WINFOArtifact: Compute difference also if part of difference building oneselve.
Fri, 19 Jul 2013 13:36:45 +0200 Felix Wolfsteller issue1399: Use WKms instead of WQKms object, as W-Difference artifact themselves
Fri, 19 Jul 2013 10:04:47 +0200 Felix Wolfsteller Do not fiddle with the factory name of recommendations for differences anymore.
Fri, 19 Jul 2013 06:56:30 +0200 Felix Wolfsteller Merged.
Thu, 18 Jul 2013 15:44:31 +0200 Felix Wolfsteller Do not show beddifferences in dc that lets select for differences.
Thu, 18 Jul 2013 17:56:38 +0200 Andre Heinecke Added tag 3.0.11 for changeset 63baa1873b1f
Thu, 18 Jul 2013 17:55:57 +0200 Andre Heinecke Sync not in gauge string between de and de_DE 3.0.11
Thu, 18 Jul 2013 17:55:15 +0200 Andre Heinecke Add cleanup to the release script
Thu, 18 Jul 2013 17:54:44 +0200 Andre Heinecke Shorten and correct waterlevel not in gauge string
Thu, 18 Jul 2013 17:53:56 +0200 Andre Heinecke Add quick hack to fix the exported name of Amtl.Fixierungen
Thu, 18 Jul 2013 17:53:11 +0200 Andre Heinecke Change artifact database v param to be type TEXT
Thu, 18 Jul 2013 15:54:48 +0200 Andre Heinecke Add official Fixings to PDF Export
Thu, 18 Jul 2013 15:54:23 +0200 Andre Heinecke Indentation fix
Thu, 18 Jul 2013 15:50:59 +0200 Andre Heinecke Factor out description getting code from csv export and reuse for pdf
Thu, 18 Jul 2013 15:22:45 +0200 Andre Heinecke Include the calculation borders in the official line export.
Thu, 18 Jul 2013 14:51:26 +0200 Felix Wolfsteller issue1395: Make new chart(.xml)-wdiff Facet Compat List equal to winfo/wdiffs one.
Thu, 18 Jul 2013 13:26:33 +0200 Andre Heinecke Factor out filtering code in WaterlevelExporter
Thu, 18 Jul 2013 13:25:29 +0200 Christian Lins Fix for SAML authentication in FLYSHeader's Info button (#702).
Thu, 18 Jul 2013 13:16:33 +0200 Andre Heinecke Add official fixings to Waterlevel CSV Export (issue1384)
Thu, 18 Jul 2013 13:14:57 +0200 Andre Heinecke Add getArtifactsByName to collection
Thu, 18 Jul 2013 13:13:51 +0200 Andre Heinecke Add getFirstLastKM utiltity function to WQKms
Thu, 18 Jul 2013 13:12:39 +0200 Andre Heinecke Mark staticwqkms that are loaded as officiallines recommendation as official
Thu, 18 Jul 2013 12:47:21 +0200 Felix Wolfsteller issue1395: Let WDifferencesCurveGenerator use Beddiff-processors to display beddiff data.
Thu, 18 Jul 2013 12:43:00 +0200 Felix Wolfsteller WDifferencesCurveGenerator: added a logger.
Thu, 18 Jul 2013 12:37:08 +0200 Felix Wolfsteller issue1395: Renamed bedheight-differences macro, call it from wdiff DC context.
Thu, 18 Jul 2013 12:36:08 +0200 Felix Wolfsteller issue1395: add Bedheight facets to winfo wdiff out compat matrix.
Thu, 18 Jul 2013 12:34:43 +0200 Felix Wolfsteller Doc and indentation fix.
Thu, 18 Jul 2013 12:34:05 +0200 Felix Wolfsteller Doc.
Thu, 18 Jul 2013 12:33:06 +0200 Felix Wolfsteller issue1394: Minor refactoring.
Thu, 18 Jul 2013 12:32:14 +0200 Felix Wolfsteller i18n.
Thu, 18 Jul 2013 12:20:02 +0200 Felix Wolfsteller issue1395: Use correct out name in DC for bedheight-diffs.
Thu, 18 Jul 2013 10:28:32 +0200 Felix Wolfsteller issue1396: Fix (at least partly) the loading of new differences via dc.
Wed, 17 Jul 2013 15:11:37 +0200 Felix Wolfsteller issue1394: Prevent display of empty paths in DC tree (vollmer and waterlevels).
Wed, 17 Jul 2013 14:58:46 +0200 Felix Wolfsteller issue1394: i18n
Wed, 17 Jul 2013 14:38:11 +0200 Felix Wolfsteller Fix typos that lead to non-compilability.
Wed, 17 Jul 2013 12:18:28 +0200 Felix Wolfsteller issue1394: Let client use the new pseudo-out: differenceable, deal with
Wed, 17 Jul 2013 12:16:47 +0200 Felix Wolfsteller Commit omitted patch for BedDiffHeightYearProcessor.
Wed, 17 Jul 2013 12:15:00 +0200 Felix Wolfsteller issue1394, issue1366: Prepare difference state to handle other artifacts, esp.
Wed, 17 Jul 2013 12:10:23 +0200 Felix Wolfsteller issue1394: meta-data.xml: Add DC-Config for (pseudo-)out "differenceable".
Wed, 17 Jul 2013 10:03:27 +0200 Felix Wolfsteller Doc.
Wed, 17 Jul 2013 10:02:58 +0200 Felix Wolfsteller Doc.
Wed, 17 Jul 2013 10:01:40 +0200 Felix Wolfsteller Doc.
Wed, 17 Jul 2013 10:00:38 +0200 Felix Wolfsteller Added vimlines.
Wed, 17 Jul 2013 09:59:41 +0200 Felix Wolfsteller Doc.
Wed, 17 Jul 2013 09:58:41 +0200 Felix Wolfsteller Doc.
Wed, 17 Jul 2013 09:57:10 +0200 Felix Wolfsteller Docs, cosmetics.
Tue, 16 Jul 2013 10:43:59 +0200 Felix Wolfsteller Cosmetics, doc, obsolete import removal.
Tue, 16 Jul 2013 10:00:34 +0200 Felix Wolfsteller Fix cloning of old MINFO/Beddiff-calculations.
Mon, 15 Jul 2013 14:48:00 +0200 Felix Wolfsteller BedDifferenceYearGenerator: Remove stray code, fix axis, added vimline.
Mon, 15 Jul 2013 14:42:09 +0200 Felix Wolfsteller Refactored BedDifferenceYearGenerator to use new BedDiffYearProcessor.
Mon, 15 Jul 2013 14:41:03 +0200 Felix Wolfsteller Whitespace.
Mon, 15 Jul 2013 12:38:28 +0200 Felix Wolfsteller Fix debug output.
Mon, 15 Jul 2013 12:31:01 +0200 Felix Wolfsteller Moved BedDiffYearProcessor to BedDiffHeightYearProcessor.
Mon, 15 Jul 2013 12:24:25 +0200 Felix Wolfsteller Minor refactoring to use processor and later use processor in WINFO-Diagrams.
Mon, 15 Jul 2013 06:33:51 +0200 Felix Wolfsteller Show (csv-)waterlevel in beddiff-datacages.
Fri, 12 Jul 2013 11:18:11 +0200 Felix Wolfsteller OutputHelper: Fix misleading debug output copy/pasted from D4EArtifactCollection.
Thu, 11 Jul 2013 21:54:41 +0200 Felix Wolfsteller More doc fixes.
Thu, 11 Jul 2013 21:53:34 +0200 Felix Wolfsteller Fix doc.
Thu, 11 Jul 2013 11:21:32 +0200 Felix Wolfsteller issue1312: Bring back auto-coloring to FixPoints.
Thu, 11 Jul 2013 10:24:32 +0200 Felix Wolfsteller issue1168: Use all QSectors for FixAnalysis-Calculation.
Wed, 10 Jul 2013 14:49:21 +0200 Felix Wolfsteller issue1370: Force second axis if at gauge.
Wed, 10 Jul 2013 14:26:31 +0200 Felix Wolfsteller issue702: (temporarily) disable "Info"-Button.
Wed, 10 Jul 2013 11:43:20 +0200 Felix Wolfsteller Debug/typo fixes.
Wed, 10 Jul 2013 11:42:31 +0200 Felix Wolfsteller Doc/Debug.
Wed, 10 Jul 2013 11:41:24 +0200 Felix Wolfsteller doc.
Wed, 10 Jul 2013 11:37:50 +0200 Felix Wolfsteller Doc.
Wed, 10 Jul 2013 11:37:00 +0200 Felix Wolfsteller Typo in doc fix.
Wed, 10 Jul 2013 10:33:56 +0200 Felix Wolfsteller issue1235: Fix determination of SedimentLoadLSGenerators Y-Axis (m3/a or t/a).
Wed, 10 Jul 2013 10:05:52 +0200 Felix Wolfsteller BedDiff*Generator: Refactored to avoid code dupes. The problematic setting
Wed, 10 Jul 2013 09:31:43 +0200 Felix Wolfsteller BedDiffHeightYearGenerator: Correct list size check, in
Tue, 09 Jul 2013 10:50:33 +0200 Felix Wolfsteller Minor refactoring, extracted method.
Tue, 09 Jul 2013 10:28:52 +0200 Felix Wolfsteller Prevent accessing min element of empty list, repairing BedDiff Year-Diagrams.
Mon, 08 Jul 2013 14:50:59 +0200 Christian Lins Merged
Mon, 08 Jul 2013 13:59:24 +0200 Christian Lins Add SAML authentication to Info-Button.
Mon, 08 Jul 2013 14:06:44 +0200 Felix Wolfsteller issue1386: Fix date parameter for official epochs query.
Mon, 08 Jul 2013 11:41:10 +0200 Felix Wolfsteller issue1386: Prevent null-ranges to be set when station of sediment measurement
Mon, 08 Jul 2013 10:25:25 +0200 Felix Wolfsteller issue1235: Prevent division by zeros leading to NaNs.
Fri, 05 Jul 2013 12:16:46 +0200 Felix Wolfsteller issue1149: Be able to add label/annotation to event points.
Fri, 05 Jul 2013 09:36:14 +0200 Felix Wolfsteller doc cosmetic.
Fri, 05 Jul 2013 09:01:57 +0200 Felix Wolfsteller Doc, yay, adds color.
Thu, 04 Jul 2013 12:12:37 +0200 Felix Wolfsteller issue1157: Make a better choice for master and active CrossSection.
Thu, 04 Jul 2013 11:52:06 +0200 Felix Wolfsteller issue1157: Let CrossSection be able to find out whether it should be active & master.
Thu, 04 Jul 2013 11:48:33 +0200 Felix Wolfsteller issue1157: Store parents initial km at CrossSectionArtifact.
Wed, 03 Jul 2013 16:09:51 +0200 Felix Wolfsteller Initial improved query to find matching cross section.
Wed, 03 Jul 2013 12:09:05 +0200 Felix Wolfsteller CrossSectionChartThemePanel: Corrected doc-string.
Wed, 03 Jul 2013 11:36:43 +0200 Felix Wolfsteller issue1370: In GWT chart property editor, suppres editing the "W [cm]" axis.
Wed, 03 Jul 2013 09:34:02 +0200 Felix Wolfsteller In analogy to w values allow q values to be calculated at the
Tue, 02 Jul 2013 15:43:11 +0200 Felix Wolfsteller MainValuesArtifact: Prevent NPE.
Tue, 02 Jul 2013 15:36:46 +0200 Felix Wolfsteller FixWQCurveGenerator: Set same tolerance to "at Gauge?"-definition as in other w/q cases.
Tue, 02 Jul 2013 15:03:04 +0200 Felix Wolfsteller FixWQCurveGenerator: Make second axis initial extends match first one.
Tue, 02 Jul 2013 09:57:55 +0200 Felix Wolfsteller RiverUtils: Made two debug output lines unique.
Tue, 02 Jul 2013 09:57:17 +0200 Felix Wolfsteller Antidoc: Strip "This method" from short doc strings.
Tue, 02 Jul 2013 08:21:10 +0200 Felix Wolfsteller issue1370: Translate main values if needed.
Tue, 02 Jul 2013 07:12:50 +0200 Felix Wolfsteller doc
less more | rev 7485: (0) -3000 -1000 -960 +960 +1000 tip
http://dive4elements.wald.intevation.org